Skip to main content

OBTENCION DE BIOCOMBUSTIBLES CON PROPIEDADES MEJORADAS MEDIANTE LA UTILIZACION DE SISTEMAS CATALITICOS AVANZADOS BASADOS EN NANOMATERIALES DE CARBONO

ENE2014-52189-C2-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards a sustainable bio-fuels production from lignocellulosic bio-oils: Influence of operating conditions on the hydrodeoxygenation of guaiacol over a Mo2C/CNF catalyst

  • Remón, Javier
  • Ochoa, Elba
  • Foguet, Carlos
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
5 Figuras.- Tablas suplementarias disponibles en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work firstly provides a thorough insight into the effects of the operating conditions (catalyst loading, initial H2 pressure temperature, reaction time, H2/guaiacol ratio and liquid reaction volume) on the hydrodeoxygenation (HDO) of guaiacol over a Mo2C/CNF catalyst. Under the operating condition tested, gas and solid formation was negligible and guaiacol was primary converted to different liquid products, including non-deoxygenated (0-oxy), mono-deoxygenated (1-oxy) and fully deoxygenated (2-oxy) compounds, together with high molecular weight soluble oligomers. An increase in the catalyst loading increased the guaiacol conversion and HDO efficiency, augmenting the proportions of HDO products. Among these species, the progressive transformation of 1-oxy compounds into 2-oxy species was kinetically and thermodynamically controlled by the catalyst loading and the amount of H2 dissolved in the liquid medium, respectively. Augmenting the H2 pressure increased the H2 availability in the liquid, which led to increases over time in the guaiacol conversion and HDO efficiency, thus promoting the production of HDO products and facilitating the transformation of guaiacol into fully de-oxygenated products. This increase depended on the reaction volume, with more pronounced variations occurring for a small than for a large volume due to the greater variations occurring in the H2/guaiacol ratio for the former than the latter. The temperature exerted a kinetic promoting effect together with a thermodynamic inhibitory influence, as some of the reactions involved were not thermodynamically favoured at high temperature. Therefore, the detailed analysis included in this work brings novel information on guaiacol HDO, which can help to establish the basis for catalysts development and reactors design to achieve a sustainable bio-fuels production from lignocellulosic bio-oils., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2014-52189-C02-01-R and ENE2017-83854-R). Elba Ochoa thanks for the award of her PhD under the frame of the aforementioned project. In addition, Javier Remón Núñez would like to express his gratitude to the Spanish Ministry “Ministerio de Ciencia, Innovación y Universidades” for the Juan de la Cierva fellowship (FJCI-2016-30847) awarded., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Performance and stability of counter electrodes based on reduced few-layer graphene oxide sheets and reduced graphene oxide quantum dots for dye-sensitized solar cells

  • Torres Gamarra, Daniel
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
  • Aricò, Antonino Salvatore
  • Baglio, Vincenzo
9 Figuras, 4 Tablas.-- Material suplementario disponible en línea en la web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Graphene-based materials represent an attractive alternative to platinum in dye-sensitized solar cells (DSSC) counter electrodes to contribute to an efficient conversion of solar energy into electricity. Despite the slower kinetics of carbon for the reduction of triiodide compared to platinum, they are characterized by low cost and promising stability. In this work, two different materials are investigated: reduced few-layer graphene oxide (rFLGO) and reduced graphene oxide quantum dots (rGOQD). The electrochemical performance of DSSC assembled with either rFLGO or rGOQD at the counter electrode is correlated to their most important physico-chemical features. The domain size of graphene sheets had an important effect on the performance at the counter electrode, with quantum dots performing 13% higher efficiency than rFLGO, correlated with a higher density of active sites. Both graphene nanostructures exhibited a better stability behavior upon electrochemical cycling and seasoning of the cells as compared to Pt counter electrode., ICB-CSIC authors acknowledge the Raw Materials Network of Infrastructure “ITO substitution in opto-electronic devices” (European Union), and the funding of the FEDER and the Spanish Science, Innovation and Universities Ministry (MICINN) (ENE2011-28318-C03-01 and ENE2014-52189-C02-01-R). JLP and DS thank MICINN for their Ramón y Cajal research contracts (RyC-2013-12494 and RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bio-oil upgrading in supercritical water using Ni-Co catalysts supported on carbon nanofibres

  • Remón, Javier
  • Arauzo, J.
  • García Nieto, Lucía
  • Arcelus-Arrillaga, Pedro
  • Millan, Marcos
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
6 Figures, 9 Tables.-- © 2016. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work addresses the preparation, characterisation and screening of different Ni-Co catalysts supported on carbon nanofibres (CNFs) for use in the upgrading of bio-oil in supercritical water. The aim is to improve the physicochemical properties of bio-oil so that it can be used as a fuel. The CNFs were firstly oxidised in HNO3 and afterwards subjected to a thermal treatment to selectively modify their surface chemistry prior to the incorporation of the metal active phase (Ni-Co). The CNFs and the supported catalysts were thoroughly characterised by several techniques, which allowed a relationship to be established between the catalyst properties and the upgrading results. The use of Ni-Co/CNFs for bio-oil upgrading in supercritical water (SCW) significantly improved the properties of the original feedstock. In addition, the thermal treatment to which the fibres were subjected exerted a significant influence on their catalytic properties. An increase in the severity of the thermal treatment led to a substantial reduction in the oxygen content of the CNFs, mainly due to the removal of the less stable oxygen surface groups, which allowed their surface polarity to decrease. This decrease resulted in less formation of solid products. However, it also reduced the H/C and increased the O/C ratios of the upgraded liquid. Therefore, a compromise between the yield and the properties of the upgraded bio-oil was achieved with a Ni-Co supported on a CNF with a moderate amount of oxygen surface groups., The authors wish to express their gratitude to the Aragon Government (GPT group), the European Social Fund and the Spanish MINECO (projects ENE2010-18985, ENE 2011-28318, ENE2013-41523-R and ENE2014-52189-C2-1-R) for providing financial support. Javier Remón Núñez would like to express his gratitude to the Spanish MINECO for the FPI (BES-2011-044856) and mobility (EEBB-I-14-08688) grants awarded. Jose Luis Pinilla thanks the Spanish MINECO for his Ramon y Cajal research contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cobalt doping of α-Fe/Al2O3 catalysts for the production of hydrogen and high-quality carbon nanotubes by thermal decomposition of methane

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
10 figures, 4 tables.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Fe–Co/Al2O3 catalysts were developed and tested in the catalytic decomposition of methane (CDM) for the synthesis of multi-wall carbon nanotubes (MWCNT) and the CO2-free hydrogen production. While Fe (54.5–66.7 mol.%) is the main active phase for the carbon formation on the catalyst, Co acts as dopant aiming to improve its overall catalytic behaviour. Catalysts with Co contents of up to 18.2 M% showed the presence of α-Fe and Fe–Co crystallites with different size and lattice parameter. Fe1-xCox alloy with bcc crystal system was identified only for Co contents of 14.0% and above, and presented a lattice constant lower than α-Fe, which would modify the carbon diffusion of the metal particle during the MWCNT growth. Co inhibited the Fe3C formation during CDM resulting in higher carbon formations and longer activity times. This phase, shown in undoped catalysts, favored the presence of bamboo-type carbon nanotubes., This work was funded by the European Regional Development Fund (ERDF) and the Spanish Economy and Competitiveness Ministry (ENE2014-52189-C02-01-R and ENE2017-83854-R). DT thanks for his research contract under the frame of ENE2014-52189-C02-01-R project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Graphene oxide nanofibers: synthesis and electrochemical properties

  • Torres Gamarra, Daniel
  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Pinilla Ibarz, José Luis
  • Lázaro Elorri, María Jesús
  • Suelves Laiglesia, Isabel
1 figure.-- Abstract of the poster presented at the CESEP’19 Conference: 8th International Conference on Carbon for Energy Storage and Environment Protection, October 20-24th, Alicante (Spain).-- © Universidad de Alicante., Graphene-based materials are very attractive for numerous applications such as electronics, sensors, energy-storage materials, composites or catalytic supports. Among the routes for the synthesis of these materials, obtaining them from graphitic carbon using chemical routes followed by ultrasonic exfoliation allows scalable processing in liquid suspension. Carbon nanofilaments can be used for graphene preparation as an alternative to the use of synthetic graphite [1], whose environmental sustainability and cost are penalized by the use of coke from petroleum processing and graphitization treatment at high temperature (> 2500 °C), respectively. In this work, fishbone carbon nanofibers (CNF) were subjected to different oxidation ratios (OR = KMnO4/CNF) and ultrasound assisted exfoliation (1 or 2 h) to obtain graphene oxide nanofibers (GONF, Figure 1a), i.e. filamentous-like structures with ca. 0.75 nm interlayer spacing. The different levels of exfoliation and surface chemistry are key in their tunable electrochemical behaviour it terms of capacitance., The authors acknowledge the funding of the FEDER and the Spanish Ministry of Science and Universities (MICINN) (ENE2014-52189-C02-01-R). DS thank also MICINN for his Ramón y Cajal research contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Desarrollo de catalizadores bimetálicos Ni-Co para us uso en la descomposición catalítica de biogás

  • Llobet, Saúl de
  • Pinilla Ibarz, José Luis
  • Moliner Álvarez, Rafael
  • Suelves Laiglesia, Isabel
Póster presentado en la Reunión de la Sociedad Española de Catálisis 2015 (SECAT 2015), celebrada en Barcelona del 13-15 de julio de 2015., Los autores agradecen a los fondos FEDER y al Ministerio de Economía y Competitividad (MINECO) por la financiación recibida (proyectos ENE2011-28318-C03-01 y ENE2014-52189-C2-1-R). S. de Llobet agradece a la Diputación General de Aragón la beca de doctorado. J.L. Pinilla agradece al MINECO su contrato Ramón y Cajal.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Influencia de la relación Fe/Mo en catalizadores para la obtención de nanotubos de carbono con distinta distribución de diámetros

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
Póster presentado en la Reunión Sociedad Española de Catálisis 2015 (SECAT 2015), celebrada en Barcelona del 13-15 de julio de 2015., Los autores agradecen a los fonos FEDER y al Ministerio de Economía y Competitividad (MINECO) el apoyo económico en los proyectos ENE2011-28318-C03-01 y ENE2014-52189-C2-1-R. DT agradece la adjudicación de su beca de doctorado bajo el proyecto ENE2011-28318-C03-01. JLP agradece al MINECO por su contrato de investigación Ramón y Cajal.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Síntesis y caracterización electroquímica de materiales híbridos basados en nanofibras de carbono recubiertas de sulfuro de molibdeno

  • Ochoa, Elba
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
  • Cuesta Pedrayes, Nuria
  • Cameán Bao, Iria
Póster presentado en la XIII Reunión GEC (Grupo Español del Carbón), celebrada en Alicante del 18 al 21 de Octubre de 2015., En la actualidad, la mayor parte de las baterías de ion litio comerciales utilizan ánodos de grafito. Sin embargo, una de las mayores desventajas del electrodo de grafito es que su capacidad de almacenamiento de litio está limitada a un valor teórico de 372 mAh g-1 lo que en consecuencia limita la energía de la batería. El sulfuro de molibdeno (MoS2) es capaz de insertar de forma reversible en su estructura mayor cantidad de litio que los valores teóricos correspondientes al grafito. Sin embargo, los resultados obtenidos mostraron una baja ciclabilidad, probablemente como consecuencia de la deformación de las láminas de MoS2 a causa de la gran cantidad de litio intercalado. En este trabajo se han preparado materiales híbridos basados en nanofibras de carbono (NFC) recubiertas coaxialmente por láminas de MoS2 (NFC/MoS2) y se ha estudiado su comportamiento como ánodos en baterías de ion Litio., Los autores agradecen a los fodos FEDER y al Ministerio de Economía y Competitividad (MINECO) por la financiación recibida (proyectos ENE2011-28318-C03 y ENE2014-52189-C2-1-R. J.L. Pinilla y N. Cuesta agradecen al MINECO por la financiación de su contrato Ramón y Cajal y su beca de doctorado FPI (BES 2012-052711), respectivamente.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Conversión catalítica one-pot de celulosa

  • Frecha, Esther
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
Póster presentado en la 7ª Jornada Jóvenes Investigadores (Química y Fisica) de Aragón, organizada por las Secciones Territoriales en Aragón de las Reales Sociedades Españolas de Química y de Física, 24 de noviembre de 2016, celebrada en la Facultad de Ciencias de la Universidad de Zaragoza., En el marco de la biorrefinería, la celulosa se presenta como un recurso abundante, renovable y con nulo impacto de su explotación sobre la cadena alimentaria. Entre las estrategias de conversión, destaca la hidrogenación hidrólitica en una sola etapa (conversión one-pot). El principal producto de reacción, el sorbitol, es considerado como uno de los 12 compuestos plataforma más importantes para la obtención de productos químicos de alto valor añadido., Los autores agradecen a los fondos FEDER y al Ministerio de Economía y Competitividad por la financiación recibida (Proyecto ENE2014-52189-C2-1-R). Los autores agradecen al Fondo Social Europeo por su financiación, dentro del Programa para la promoción de empleo joven e implantación de la Garantía Juvenil mediante contracto en prácticas para personal titulado superior. E. Frecha agradece la adjudicación del contrato.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Upgrading de bio-oils: HDO catalítica de guayacol sobre Mo2C soportado en nanofibras de carbono

  • Ochoa, Elba
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
Póster presentado en la 7ª Jornada Jóvenes Investigadores (Química y Física) de Aragón, organizada por las Secciones Territoriales en Aragón de las Reales Sociedades Españolas de Química y de Física, 24 de noviembre de 2016, celebrada en la Facultad de Ciencias de la Universidad de Zaragoza., El alto contenido en oxígeno de los bio-oils hace imposible su utilización directa como combustible. Para solventar esta desfavorable característica, la hidrodesoxigenación (HDO) catalítica de bio-oils es considerada uno de los métodos más eficientes y prometedores. No obstante, los catalizadores más estudiados conllevan una serie de inconvenientes tales como desactivación, contaminación del producto y/o alto coste económico. Los catalizadores basados en Mo2C soportado en nanofibras de carbono (CNF) presentan unas propiedades capaces de solventar dichos inconvenientes., Los autores agradecen al Ministerio de Economía y Competitividad (MINECO) el apoyo económico en el proyecto ENE2014-52189-C2-1-R. Elba Ochoa agradece la adjudicación de su doctorado bajo el proyecto antes mencionado., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Expanded fishbone carbon nanofibers: obtention and characterization

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
Poster presented at the AEM2016, International conference on Advanced Energy Materials, 12th-14th september 2016, University of Surrey, Guildford, England (United Kingdom)., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (projects ENE2011-28318-C03-01 and ENE2014-52189-C2-1-R). DT thanks for the award of his PhD under the frame of ENE2011-28318-C03-01 project (reference: FPI. BES-2012-052268). JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Influencia del método de síntesis de catalizadores basados en Mo2C soportados en nanofibras de carbono para la hidrodesoxigenación catalítica de guayacol

  • Ochoa, Elba
  • Torres Gamarra, Daniel
  • Frecha, Esther
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
Póster presentado en la Reunión Sociedad Española de Catálisis 2017 (SECAT 2017), celebrada en Oviedo del 26 al 28 de junio., El alto contenido en oxígeno de los bio-oils hace imposible su utilización directa como combustible. Para solventar esta desfavorable característica, la hidrodesoxigenación (HDO) catalítica de bio-oils es considerada uno de los métodos más eficientes y prometedores. No obstante, los catalizadores más estudiados conllevan una serie de inconvenientes tales como rápida desactivación, contaminación del producto y/o alto coste económico. Los catalizadores basados en Mo2C soportado en nanofibras de carbono (Mo2C/CNF) presentan unas propiedades capaces de solventar dichos inconvenientes., Los autores agradecen a los fondos FEDER y al Ministerio de Economía y Competitividad (MINECO) la financiación recibida (proyecto ENE2014-52189-C2-1-R). Elba Ochoa agrace la adjudicación de su doctorado bajo el proyecto antes mencionado (referencia FPI. BES-2015-072060). José Luis Pinilla agradece al MINECO por su contrato Ramón y Cajal (RYC-2013-12494).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Hacia el diseño ad hoc de catalizadores basados en nanopartículas de Ni soportadas sobre nanofibras de carbono para la conversión de celulosa

  • Frecha, Esther
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
Póster presentado en la Reunión Sociedad Española de Catálisis 2017 (SECAT 2017), celebrada en Oviedo del 26 al 28 de junio., La obtención de materias primas, productos químicos y energía a partir de recursos renovables es necesaria para el desarrollo de una sociedad sostenible. Por su abundancia, y el nulo impacto de su explotación sobre la cadena alimentaria, la biomasa lignocelulósica presenta un gran potencial de aprovechamiento, siendo de particular interés la valorización de su componente principal: la celulosa., Los autores agradecen a los fondos FEDER y al Ministerio de Economía y Competitividad (MINECO) por la financiación recibida (proyecto ENE2014-52189-C2-1-R). EF agradece al Fondo Social Europeo y a la Iniciativa de Empleo Juvenil, a través del Programa operativo de Empleo Juvenil (Fondo Social Europeo 2014-2020) por su contrato. JLP agradece al MINECO por su contrato Ramón y Cajal (RYC-2013-12494).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Bio-oil upgrading in supercritical water using Ni-Co catalysts supported on carbon nanofibres

  • Remón, J.
  • Arauzo, J.
  • García, L.
  • Arcelus-Arrillaga, P.
  • Millan, M.
  • Suelves, I.
  • Pinilla, J. L.
This work addresses the preparation, characterisation and screening of different Ni-Co catalysts supported on carbon nanofibres (CNFs) for use in the upgrading of bio-oil in supercritical water. The aim is to improve the physicochemical properties of bio-oil so that it can be used as a fuel. The CNFs were firstly oxidised in HNO3 and afterwards subjected to a thermal treatment to selectively modify their surface chemistry prior to the incorporation of the metal active phase (Ni-Co). The CNFs and the supported catalysts were thoroughly characterised by several techniques, which allowed a relationship to be established between the catalyst properties and the upgrading results. The use of Ni-Co/CNFs for bio-oil upgrading in supercritical water (SCW) significantly improved the properties of the original feedstock. In addition, the thermal treatment to which the fibres were subjected exerted a significant influence on their catalytic properties. An increase in the severity of the thermal treatment led to a substantial reduction in the oxygen content of the CNFs, mainly due to the removal of the less stable oxygen surface groups, which allowed their surface polarity to decrease. This decrease resulted in less formation of solid products. However, it also reduced the H/C and increased the O/C ratios of the upgraded liquid. Therefore, a compromise between the yield and the properties of the upgraded bio-oil was achieved with a Ni-Co supported on a CNF with a moderate amount of oxygen surface groups.