Skip to main content

DESARROLLO DEL PROCESO DE DESCOMPOSICION CATALITICA DE BIOGAS PARA PRODUCIR GASES RICOS EN HIDROGENO Y MATERIALES CARBONOSOS NANOESTRUCTURADOS

ENE2011-28318-C03-01

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Desarrollo de catalizadores bimetálicos Ni-Co para us uso en la descomposición catalítica de biogás

  • Llobet, Saúl de
  • Pinilla Ibarz, José Luis
  • Moliner Álvarez, Rafael
  • Suelves Laiglesia, Isabel
Póster presentado en la Reunión de la Sociedad Española de Catálisis 2015 (SECAT 2015), celebrada en Barcelona del 13-15 de julio de 2015., Los autores agradecen a los fondos FEDER y al Ministerio de Economía y Competitividad (MINECO) por la financiación recibida (proyectos ENE2011-28318-C03-01 y ENE2014-52189-C2-1-R). S. de Llobet agradece a la Diputación General de Aragón la beca de doctorado. J.L. Pinilla agradece al MINECO su contrato Ramón y Cajal.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Influencia de la relación Fe/Mo en catalizadores para la obtención de nanotubos de carbono con distinta distribución de diámetros

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
Póster presentado en la Reunión Sociedad Española de Catálisis 2015 (SECAT 2015), celebrada en Barcelona del 13-15 de julio de 2015., Los autores agradecen a los fonos FEDER y al Ministerio de Economía y Competitividad (MINECO) el apoyo económico en los proyectos ENE2011-28318-C03-01 y ENE2014-52189-C2-1-R. DT agradece la adjudicación de su beca de doctorado bajo el proyecto ENE2011-28318-C03-01. JLP agradece al MINECO por su contrato de investigación Ramón y Cajal.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Expanded fishbone carbon nanofibers: obtention and characterization

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
Poster presented at the AEM2016, International conference on Advanced Energy Materials, 12th-14th september 2016, University of Surrey, Guildford, England (United Kingdom)., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (projects ENE2011-28318-C03-01 and ENE2014-52189-C2-1-R). DT thanks for the award of his PhD under the frame of ENE2011-28318-C03-01 project (reference: FPI. BES-2012-052268). JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the oxidation degree of few-layer graphene oxide sheets obtained from chemically oxidized multiwall carbon nanotubes

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
9 figures, 3 tables.-- © 2014. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Multiwall carbon nanotubes (MWCNT), generated by catalytic decomposition of methane using a Fe–Mo/MgO catalyst, were subjected to oxidation and exfoliation obtaining aqueous suspensions of few-layer graphene oxides (FLGO). FLGO with different oxidation ratios were obtained using a modified Hummers method by varying the amount of oxidizing agent (KMnO4), followed by ultrasonic exfoliation. The exhaustive characterization of the resulting materials clearly showed surface functional groups evolution during oxidation and structural and morphological changes. Oxidation caused expansion and separation of the graphene layers by oxygenated groups formation and water intercalation. The full opening of the MWCNT resulted in FLGO as carbon nanoribbons and sheets from a KMnO4/MWCNT ratio of 6., This work was funded by FEDER, the Spanish Science and Innovation Ministry (ENE2008-06516-C03-01) and the Spanish Economy and Competitiveness Ministry (ENE2011-28318-C03-01). DT thanks for the award of his PhD under the frame of ENE2011-28318-C03-01 project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene quantum dots from fishbone carbon nanofibers

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Gálvez Buerba, Eva Mª
  • Suelves Laiglesia, Isabel
9 figures, 2 tables.-- Supplementary information available., Graphene oxide quantum dots (GOQD) were obtained from fishbone carbon nanofibers (CNF) using a modified Hummers' method followed by ultrasound assisted exfoliation. Owing to its arrangement in accessible small sp2-carbon domains, CNF is a promising precursor for high yield GOQD obtention. The suspension was subjected to further separation by degressive differential centrifugation obtaining fractions of different sizes and oxidation states. The resulting graphene oxide-based products consisted of a mixture of expanded CNF, few-layer graphene oxide sheets and GOQD, the latter accounting for a yield of 42 wt% with respect to the initial CNF weight. The photoluminescence properties were dependent on the size and the oxidation state of each fractionated graphene oxide-based suspension. GOQD showed an excitation-dependent photoluminescent emission with a maximum at 578 nm (yellow) for an excitation of 455 nm. After hydrothermal reduction, reduced GOQD (rGOQD) exhibited bright violet photoluminescence at 448 nm for 330 nm of excitation due to the removal of hydroxyl and epoxide groups from basal planes of the graphene network. Furthermore, the quantum yield of GOQD and rGOQD were measured and reached values of 5.5 and 7%, respectively., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2011-28318-C03-01 and ENE2014-52189-C02-01-R). DT thanks for the award of his PhD under the frame of ENE2011-28318-C03-01 project. JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ni-MoS2 supported on carbon nanofibers as hydrogenation catalysts: Effect of support functionalisation

  • Pinilla Ibarz, José Luis
  • Purón, Holda
  • Torres Gamarra, Daniel
  • Suelves Laiglesia, Isabel
  • Millan, Marcos
6 figures, 5 tables.-- Supplementary information available.-- © 2014. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Fishbone carbon nanofibers (CNF) were functionalised in acidic media using nitric or nitric/sulfuric mixtures in order to introduce variations in their surface chemistry. The textural properties and surface chemistry of the functionalised CNF were characterized by Transmission Electron Microscopy (TEM), N2 adsorption, X-ray diffraction, temperature programmed desorption and X-ray photoelectron spectroscopy. Functionalised CNF thus prepared were used as catalytic support for NiMo catalysts. Resulting catalysts were composed by CNF coaxially coated by Ni-decorated MoS2 slabs, with different lengths and stacking degrees as a function of the functionalisation treatment, as TEM study revealed. Catalysts were evaluated in the hydrogenation of anthracene, a model compound representing polyaromatic groups present in heavy oil fractions. Catalysts prepared with the support functionalised by the less severe treatment, which led to short and defective MoS2 slabs, showed higher hydrogenation activity. On the other hand, harsher functionalisation treatment led to the formation of long stacked MoS2 slabs, resulting in lower performance towards anthracene hydrogenation., This work was partially funded by the Spanish Economy and Competitiveness Ministry and the FEDER funds for the financial support of the Project ENE2011-28318-C03-01. DT thanks for the award of his PhD under the frame of the aforementioned project. J.L.P. thanks the Spanish MEC for a personal grant (Spanish Scientists Mobility Program, ref. EX2009-0822). H.P. thanks the support of CONACYT Mexico for the award of her PhD grant and CSIC for the funding of the short stay at ICB-CSIC (project I-LINK ref.0439)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unzipping of multi-wall carbon nanotubes with different diameter distributions: Effect on few-layer graphene oxide obtention

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
9 figures, 5 tables.-- © 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Few-layer graphene oxide (FLGO) was obtained by chemical unzipping of multi-wall carbon nanotubes (MWCNT) of different diameter distributions. MWCNT were synthesized by catalytic decomposition of methane using Fe‐Mo/MgO catalysts. The variation in the Fe/Mo ratio (1, 2 and 5) was very influential in MWCNT diameter distribution and type of MWCNT obtained, including textural, chemical, structural and morphological characteristics. MWCNT diameter distribution and surface defects content had a profound impact on the characteristics of the resulting FLGO. Thus, MWCNT obtained with the catalyst with a Fe/Mo: 5 and presenting a narrow diameter distribution centered at 8.6 ± 3.3 nm led to FLGO maintaining non-oxidized graphite stacking (according to XRD analysis), lower specific surface area and higher thermostability as compared to FLGO obtained from MWCNT showing wider diameter distributions. The presence of more oxygen-containing functionalities and structural defects in large diameter nanotubes promotes the intercalation of species towards the inner layers of the nanotube, resulting in an enhanced MWCNT oxidation and opening into FLGO, what improves both micro- and mesoporosity., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2011-28318-C03-01 and ENE2014-52189-C02-01-R). DT thanks for the award of his PhD under the frame of ENE2011-28318-C03-01 project. JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494)., Peer reviewed