Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced reduction of few-layer graphene oxide via supercritical water gasification of glycerol

  • Torres Gamarra, Daniel
  • Arcelus-Arrillaga, Pedro
  • Millan, Marcos
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
A sustainable and effective method for de-oxygenation of few-layer graphene oxide (FLGO) by glycerol gasification in supercritical water (SCW) is described. In this manner, reduction of FLGO and valorization of glycerol, in turn catalyzed by FLGO, are achieved simultaneously. The addition of glycerol enhanced FLGO oxygen removal by up to 59% due to the in situ hydrogen generation as compared to the use of SCW only. Physicochemical characterization of the reduced FLGO (rFLGO) showed a high restoration of the sp2-conjugated carbon network. FLGO sheets with a starting C/O ratio of 2.5 are reduced by SCW gasification of glycerol to rFLGO with a C/O ratio of 28.2, above those reported for hydrazine-based methods. Additionally, simultaneous glycerol gasification resulted in the concurrent production of H2, CO, CH4 and valuable hydrocarbons such as alkylated and non-alkylated long chain hydrocarbon (C12–C31), polycyclic aromatic hydrocarbons (PAH), and phthalate, phenol, cresol and furan based compounds., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2011-28318-C03-01 and ENE2014-52189-C02-01-R). D.T. thanks for the award of his under the frame of ENE2011-28318-C03-01 project. J.L.P. thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494). Authors acknowledge the “Laboratorio deMicroscopías Avanzadas” at “Instituto de Nanociencia de Aragón—Universidad de Zaragoza” for offering access to their instruments and expertise., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Co-, Cu- and Fe-doped Ni/Al2O3 catalysts for the catalytic decomposition of methane into hydrogen and carbon nanofibers

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
The catalytic decomposition of methane (CDM) process produces hydrogen in a single stage and avoids CO2 emission thanks to the formation of high added value carbon nanofilaments as a by-product. In this work, Ni monometallic and Ni–Co, Ni–Cu, and Ni–Fe bimetallic catalysts are tested in the CDM reaction for the obtention of fishbone carbon nanofibers (CNF). Catalysts, in which Al2O3 is used as textural promoter in their formulation, are based on Ni as main active phase for the carbon formation and on Co, Cu, or Fe as dopants in order to obtain alloys with improved catalytic behaviour. Characterization of bimetallic catalysts showed the formation of particles of Ni alloys with a bimodal size distribution. For the doping content studied (5 mol. %), only Cu formed an alloy with a lattice constant high enough to be able to favor the carbon diffusion through the catalytic particle against surface diffusion, resulting in higher carbon formations, longer activity times, and activity at 750 ◦C; whereas Ni, Ni–Co, and Ni–Fe catalysts were inactive. On the other hand, Fe also improved the undoped catalyst performance presenting a higher carbon formation at 700 ◦C and the obtention of narrow carbon nanofilaments from active Ni3Fe crystallites., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2014-52189-C02-01-R). DT thanks for the award of his PhD under the frame of the ENE2011-28318-C03-01 project. JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494). The microscopy works have been conducted in the “Laboratorio de Microscopías Avanzadas” at “Instituto de Nanociencia de Aragón—Universidad de Zaragoza”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Liquid-phase hydrodeoxygenation of guaiacol over Mo2C supported on commercial CNF. Effects of operating conditions on conversion and product selectivity

  • Moreira, Rui
  • Ochoa, Elba
  • Pinilla Ibarz, José Luis
  • Portugal, António
  • Suelves Laiglesia, Isabel
2 Tablas,7 Figuras, 14 Páginas., In this work, a Mo2C catalyst that was supported on commercial carbon nanofibers (CNF) was synthetized and tested in the hydrodeoxygenation (HDO) of guaiacol. The effects of operating conditions (temperature and pressure) and reaction time (2 and 4 h) on the conversion of guaiacol and products selectivity were studied. The major reaction products were cresol and phenol, followed by xylenols and toluene. The use of more severe operating conditions during the HDO of guaiacol caused a diversification in the reaction pathways, and consequently in the selectivity to products. The formation of phenol may have occurred by demethylation of guaiacol, followed by dehydroxylation of catechol, together with other reaction pathways, including direct guaiacol demethoxylation, and demethylation of cresols. X-ray diffraction (XRD) analysis of spent catalysts did not reveal any significant changes as compared to the fresh catalyst., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2014-52189-C02-01-R and ENE2017-83854-R). Elba Ochoa thanks for the award of her PhD under the frame of this project. J.L.P. thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494). Rui Moreira is extremely grateful to ICB-CSIC for partially financing living costs during his short term mission., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of carburization time on the activity of Mo2C/CNF catalysts for the HDO of guaiacol

  • Ochoa, Elba
  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
6 Figuras, 3 Tablas.-- Documentación suplementaria disponible en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Carbon nanofiber (CNF) supported β-Mo2C-based catalysts were synthetized by carbothermal hydrogen reduction at 750 °C for different times (1, 2, 4, 6 and 18 h) in order to study both the carbide phase formation and the CNF stability during this key stage. Catalysts were characterized by N2 physisorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopy, inductively coupled plasma optical emission spectrometry and scanning transmission electron microscopy. Subsequently, catalysts were evaluated in the hydrodeoxygenation (HDO) of guaiacol using a batch autoclave reactor at mild conditions of temperature and pressure (300 °C and 20 bar of H2). Liquid products were analysed after 2 h of reaction by gas chromatography. In all cases, β-Mo2C phase was formed during the carburization, and crystal sizes increased (from 6 to 18 nm as measured by XRD) as the carburization time did. However, a deep gasification of the support was observed in catalysts carburized above 6 h, resulting in a dramatic loss of specific surface area. In the guaiacol HDO reaction, higher conversions (72–80 %) and HDO ratios (53–63 %) were obtained using catalysts carburized for 2 h and onwards. Considering the carbide content in the catalyst, 1 and 2 h carburized catalysts exhibited the highest values of formation of HDO products: phenol, cyclohexane + benzene and anisole. Besides this, a clear relationship between the Mo2C surface area (SMo2C) and the product formation rate could be inferred for the catalysts carburized at 1, 2 and 4 h, in which the textural properties were not affected by the carburization time. On the other hand, longer carburization times had a worse performance despite the largest values of SMo2C, being this fact related to the dramatic loss of the catalyst textural properties., The authors were grateful for the financial support by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2014-52189-C02-01-R and ENE2017-83854-R). EO acknowledges MINECO for her PhD grant under the frame of the aforementioned project. JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Carbon nanofiber supported Mo2C catalysts for hydrodeoxygenation of guaiacol: The importance of the carburization process

  • Ochoa, Elba
  • Torres Gamarra, Daniel
  • Moreira, Rui
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
13 Figuras, 4 Tablas.-- Material suplementario disponible en línea en la web del editor.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Molybdenum carbide catalysts supported on carbon nanofibers (β-Mo2C/CNF) were synthetized employing different carburization parameters: five temperatures (550–750 °C) and four heating rates (1–10 °C/min) were tested. The carburization process of the Mo precursor in the catalysts was studied by thermogravimetric analysis, X-ray diffraction, X-ray photoelectron spectroscopy, N2 physisorption, inductively coupled plasma optical emission spectrometry and transmission electron microscopy. The formation of the carbide phase was confirmed by the presence of the oxycarbide and carbide phases which were observed on the surface of all catalysts. Higher carburization temperatures resulted in an increase of the carbide phase content and crystal size at the expenses of the oxycarbide phase disappearance. High carburization temperatures and low heating rates were needed in order to obtain well-defined β-Mo2C crystals over the catalysts, which involved a substantial improvement of their catalytic activity in the hydrodeoxygenation of guaiacol., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2014-52189-C02-01-R and ENE2017-83854-R). EO thanks for the award of her PhD under the frame of the aforementioned project. JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494). The microscopy works have been conducted in the “Laboratorio de Microscopías Avanzadas” at “Instituto de Nanociencia de Aragón - Universidad de Zaragoza”. Authors acknowledge the LMA-INA for offering access to their instruments and expertise. RM is extremely grateful to ICB for partially financing his short term mission at the institution., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Screening of Ni-Cu bimetallic catalysts for hydrogen and carbon nanofilaments production via catalytic decomposition of methane

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
10 Figures, 6 Tables.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The catalytic decomposition of methane (CDM) is a H2 production process in which the CO2 emission of conventional processes is avoided and from which carbon nanofilaments can be obtained as a high added value by-product. In this work, we present a thermogravimetry-based screening of catalysts according to their carbon production in the CDM reaction. Catalysts studied were based on Ni as active phase, using two textural promoters (Al2O3 or MgO) and Cu as dopant element in different proportions: 2.5, 5.0, 7.5 and 10 mol %. Cu doping resulted in an increase in both the maximum temperature of activity (>100 °C) and the carbon formation rate, which were maximum for a Cu content of 7.5 mol %, regardless of the textural promoter used. The formation of a solid solution of Ni(x)Cu(1-x), with lattice constants and particle size distribution highly dependent on the Cu content, led to the formation of fishbone carbon nanofibers with different morphological features, such as the α angle between the graphene stacks and the growth axis of the nanofilament, the diameter, the length and the formation or not of an inner hollow., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2011-28318-C03-01 and ENE2014-52189-C02-01-R). DT thanks for the award of his PhD under the frame of ENE2011-28318-C03-01 project. JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of carbon-based materials and CeO2 on Ni catalysts for Kraft lignin liquefaction in supercritical water

  • Cardoso, Aderlanio
  • Ramírez-Reina, Tomás
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
  • Millan, Marcos
  • Hellgardt, Klaus
10 Figuras, 3 Tablas.-- Información suplementaria disponible en línea en la página web del editor, Kraft lignin (KL) is a by-product from cellulose production typically treated as a waste or used as a low-value fuel in heat and power generation in the pulp and paper industry. This study explores KL upgrading to monoaromatic compounds using supercritical water (SCW) as reaction medium. The effect of Ni–CeO2 catalysts supported on carbon nanofibers (CNF) and activated carbon (AC) on the product distribution was investigated. These catalysts were prepared by a wet-impregnation method with acetone, and reduced Ni was observed without the use of H2. CNF presented a high degree of stability in SCW. Ni in its reduced state was still present in all spent catalysts, mainly when CNF were the support. While catalysts supported in AC led to high yields of char and gas, a 56 wt% yield of a light liquid fraction, recovered as dichloromethane (DCM)-soluble product and consisting mainly of (methoxy)phenols (>80 mol%), was obtained in a batch reactor at 400 °C, 230 bar, with Ni–CeO2/CNF as a catalyst. A short reaction time was key to avoid the formation of gas and char. This study demonstrates that high yields of DCM-soluble products from KL and low char formation can be obtained by using only SCW and catalysts, an alternative to widely reported approaches like the addition of organic co-solvents (e.g., phenol) and/or H2., Authors would like to thank the Brazilian National Council for Scientific and Technological Development (CNPq) for Aderlanio Cardoso's PhD scholarship and funding by EPSRC, UK (Grant No. EP/K014676/1). This work was also partly funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2014-52189-C02-01-R). Dr José Luis Pinilla thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Performance and stability of counter electrodes based on reduced few-layer graphene oxide sheets and reduced graphene oxide quantum dots for dye sensitized solar cells

  • Torres Gamarra, Daniel
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
  • Aricò, Antonino Salvatore
  • Baglio, Vincenzo
1 figure.-- Abstract of the poster presented at the VII International Symposium SRUK/CERU (2019), organized by the Society of Spanish Researchers in the United Kingdom. 28th-30th June 2019, Liverpool (United Kingdom)., Graphene oxide nanomaterials, specifically reduced few-layer graphene oxide (rFLGO) sheets and reduced graphene oxide quantum dots (rGOQD), were explored as active and cost-effective counter electrodes for dye-sensitized solar cells (DSSCs). The synthesis strategy adopted in this work for these materials is based on an economic and easily scalable route of exfoliation of multi-wall carbon nanotubes (Top-Down approach). This allows the easy tailoring of rFLGO/rGOQD size and oxidation degree for their use as bulk material in counter electrodes, having a significant influence on the photovoltaic performance and stability. Despite the slower kinetics of carbon for the reduction of triiodide compared to platinum, they are characterized by low cost and promising stability. The electrochemical performance of DSSC assembled with either rFLGO or rGOQD at the counter electrode is correlated to their most important physico-chemical features. The domain size of graphene sheets had an important effect on the performance at the counter electrode, with quantum dots performing 13% higher efficiency than rFLGO, correlated with a higher density of active sites. Both graphene nanostructures exhibited a better stability behavior upon electrochemical cycling and seasoning of the cells as compared to Pt counter electrode., ICB-CSIC authors acknowledge the Raw Materials Network of Infrastructure ITO substitution in opto-electronic devices (European Union), and the funding of the FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2011-28318-C03-01 and ENE2014-52189-C02-01-R). JLP and DS thank MINECO for their Ramon y Cajal research contracts (RyC-2013-12494 and RyC-2016-20944). CNR-ITAE authors acknowledge the financial support from the FotoH2 project. This project has received funding from the European Union s Horizon 2020 research and innovation programme under Grant Agreement n° 760930., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene quantum dots from fishbone carbon nanofibers

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Gálvez Buerba, Eva Mª
  • Suelves Laiglesia, Isabel
9 figures, 2 tables.-- Supplementary information available., Graphene oxide quantum dots (GOQD) were obtained from fishbone carbon nanofibers (CNF) using a modified Hummers' method followed by ultrasound assisted exfoliation. Owing to its arrangement in accessible small sp2-carbon domains, CNF is a promising precursor for high yield GOQD obtention. The suspension was subjected to further separation by degressive differential centrifugation obtaining fractions of different sizes and oxidation states. The resulting graphene oxide-based products consisted of a mixture of expanded CNF, few-layer graphene oxide sheets and GOQD, the latter accounting for a yield of 42 wt% with respect to the initial CNF weight. The photoluminescence properties were dependent on the size and the oxidation state of each fractionated graphene oxide-based suspension. GOQD showed an excitation-dependent photoluminescent emission with a maximum at 578 nm (yellow) for an excitation of 455 nm. After hydrothermal reduction, reduced GOQD (rGOQD) exhibited bright violet photoluminescence at 448 nm for 330 nm of excitation due to the removal of hydroxyl and epoxide groups from basal planes of the graphene network. Furthermore, the quantum yield of GOQD and rGOQD were measured and reached values of 5.5 and 7%, respectively., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2011-28318-C03-01 and ENE2014-52189-C02-01-R). DT thanks for the award of his PhD under the frame of ENE2011-28318-C03-01 project. JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unzipping of multi-wall carbon nanotubes with different diameter distributions: Effect on few-layer graphene oxide obtention

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
9 figures, 5 tables.-- © 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Few-layer graphene oxide (FLGO) was obtained by chemical unzipping of multi-wall carbon nanotubes (MWCNT) of different diameter distributions. MWCNT were synthesized by catalytic decomposition of methane using Fe‐Mo/MgO catalysts. The variation in the Fe/Mo ratio (1, 2 and 5) was very influential in MWCNT diameter distribution and type of MWCNT obtained, including textural, chemical, structural and morphological characteristics. MWCNT diameter distribution and surface defects content had a profound impact on the characteristics of the resulting FLGO. Thus, MWCNT obtained with the catalyst with a Fe/Mo: 5 and presenting a narrow diameter distribution centered at 8.6 ± 3.3 nm led to FLGO maintaining non-oxidized graphite stacking (according to XRD analysis), lower specific surface area and higher thermostability as compared to FLGO obtained from MWCNT showing wider diameter distributions. The presence of more oxygen-containing functionalities and structural defects in large diameter nanotubes promotes the intercalation of species towards the inner layers of the nanotube, resulting in an enhanced MWCNT oxidation and opening into FLGO, what improves both micro- and mesoporosity., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2011-28318-C03-01 and ENE2014-52189-C02-01-R). DT thanks for the award of his PhD under the frame of ENE2011-28318-C03-01 project. JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494)., Peer reviewed