Skip to main content

PROPIEDADES ELECTRICAS, MAGNETICAS Y DE TRANSPORTE EN MATERIALES NANOESTRUCTURADOS

FIS2015-64222-C2-2-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Are electron affinity and Ionization potential intrinsic parameters to predict the electron or hole acceptor character of amorphous molecular materials?

  • Louis, Enrique
  • San-Fabián, Emilio
  • Díaz-García, María A.
  • Chiappe, Guillermo
  • Vergés, José A.
Organic light emitting diodes (OLEDs) are current-driven devices that utilize light emission from excited states of molecules.(1) Operating OLEDs involves charge injection from the anode and the cathode into the adjacent organic layers, transport of injected charge carriers through the organic layers, and exothermic recombination of holes and electrons to generate electronically excited states of molecules. Subsequent deactivation of molecules produces electroluminescence (EL) that goes out of the device. Attaining high quantum efficiency for EL requires: (i) efficient charge injection from both electrodes into the adjacent organic layers at low drive voltage, (ii) charge balance, and (iii) confinement of charge carriers within the emitting layer to increase the probability of emissive recombination. The insertion of hole-acceptor and electron-acceptor layers between the electrodes and the emitting layer substantially increases efficiency. A multilayer structure of OLED’s consists of the emitting layer sandwiched between hole- and electron-acceptor layers that in turn are in contact with the metallic anode and cathode, respectively. Amorphous molecular materials have been proven to show several characteristics that qualify them as excellent materials to be used in OLED’s.(1) Their most remarkable feature is that, due to their homogeneous and isotropic properties, they form smooth thin films, allowing uniform contact with the metallic electrodes and between organic layers. An issue concerning nomenclature is here worthy of comment. As stated above, device operation involves three main processes, namely, charge injection, charge transport, and light emission. Although in this work we will only focus on the first, we shall also use the accepted terminology of hole- or electron-transporters, being aware of the fact that the correct one would be “acceptors” instead of ‘transporters” (investigating their transport performance(2) would require considering also carrier mobility). Hereafter both terminologies will be used indifferently., Financial support by the Spanish “Ministerio de Economía y Competitividad MINECO” and the European Union through FEDER funds (Grants FIS2012-35880, FIS2015-64222-C2-1-P, FIS2015-64222-C2-2-P, and MAT2015-66586-R) and the Universidad de Alicante, is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Transport and optical gaps in amorphous organic molecular materials

  • San-Fabián, Emilio
  • Louis, Enrique
  • Díaz-García, María A.
  • Chiappe, Guillermo
  • Vergés, José A.
[EN] The standard procedure to identify the hole- or electron-acceptor character of amorphous organic materials used in OLEDs is to look at the values of a pair of basic parameters, namely, the ionization potential (IP) and the electron affinity (EA). Recently, using published experimental data, the present authors showed that only IP matters, i.e., materials with IP > 5.7 (<5.7) showing electron (hole) acceptor character. Only three materials fail to obey this rule. This work reports ab initio calculations of IP and EA of those materials plus two materials that behave according to that rule, following a route which describes the organic material by means of a single molecule embedded in a polarizable continuum medium (PCM) characterized by a dielectric constant ε. PCM allows to approximately describe the extended character of the system. This “compound” system was treated within density functional theory (DFT) using several combinations of the functional/basis set. In the preset work ε was derived by assuming Koopmans’ theorem to hold. Optimal ε values are in the range 4.4–5.0, close to what is expected for this material family. It was assumed that the optical gap corresponds to the excited state with a large oscillator strength among those with the lowest energies, calculated with time-dependent DFT. Calculated exciton energies were in the range 0.76–1.06 eV, and optical gaps varied from 3.37 up to 4.50 eV. The results are compared with experimental data., Financial support by the Spanish Ministerio de Economía y Competitividad MINECO and the European Union through FEDER funds (grants FIS2012-35880, FIS2015-64222-C2-1-P, FIS2015-64222-C2-2-P and MAT2015-66586-R) and the Universidad de Alicante, is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electron enrichment of zigzag edges of armchair–oriented graphene nano–ribbons increases their stability and induces pinning of Fermi level

  • Louis, Enrique
  • San-Fabián, Emilio
  • Chiappe, Guillermo
  • Vergés, José A.
[EN] Zigzag edges of neutral armchair–oriented Graphene Nano–Ribbons show states strongly localized at those edges. They behave as free radicals that can capture electrons during processing, increasing ribbon's stability. Thus, charging and its consequences should be investigated. Total energy calculations of finite ribbons using spin–polarized Density Functional Theory (DFT) show that ribbon's charging is feasible. Energies for Pariser-Parr-Pople (PPP) model Hamiltonian are compatible with DFT allowing the study of larger systems. Results for neutral ribbons indicate: i) the fundamental gap of spin–polarized (non–polarized) solutions is larger (smaller) than experimental data, ii) the ground state is spin–polarized, a characteristic still not observed experimentally. Total energy of GNRs decreases with the number of captured electrons reaching a minimum for a number that mainly depends on zigzag–edges size. The following changes with respect to neutral GNRs are noted: i) the ground state is not spin–polarized, ii) fundamental gap is in-between that of spin–polarized and non–polarized solutions of neutral ribbons, iii) while in neutral ribbons valence and conduction band onsets vs. the fundamental gap, linearly and symmetrically approach mid–gap with slope 0.5, charging induces Fermi level pinning, i.e., the slopes of the valence and conduction bands being about 0.1 and 0.9, in agreement with experiment., This work has been Partial financial support by the Spanish “Ministerio de Ciencia, Innovación y Universidades”(Grants FIS2015-64222-C2-1-P, FIS2015-64222-C2-2-P, MAT2016-77742-C2-2-P and AYA2015-66899-C2-2-P), and the Universidad de Alicante is gratefully acknowledged.