Skip to main content

PROPIEDADES TERMODINAMICAS, ELECTRONICAS Y DE TRANSPORTE EN MATERIALES Y NANOESTRUCTURAS A PARTIR DE SIMULACIONES ATOMISTICAS AVANZADAS

FIS2015-64222-C2-1-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Size-scaling behaviour of the electronic polarizability of one-dimensional interacting systems

  • Chiappe, Guillermo
  • Louis, Enrique
  • Vergés Brotons, José Antonio
  • Chiappe, Guillermo|||/items/cc74a785-b7fa-49c3-bc4c-5a4a1221ad13
Electronic polarizability of finite chains is accurately calculated from the total energy variation of the system produced by small but finite static electric fields applied along the chain direction. Normalized polarizability, that is, polarizability divided by chain length, diverges as the second power of length for metallic systems but approaches a constant value for insulating systems. This behaviour provides a very convenient way to characterize the wave-function malleability of finite systems as it avoids the need of attaching infinite contacts to the chain ends. Hubbard model calculations at half filling show that the method works for a small U  =  1 interaction value that corresponds to a really small spectral gap of 0.005 (hopping t  =  −1 is assumed). Once successfully checked, the method has been applied to the long-range hopping model of Gebhard and Ruckenstein showing 1/r hopping decay (Gebhard and Ruckenstein 1992 Phys. Rev. Lett. 68 244; Gebhard et al 1994 Phys. Rev. B 49 10926). Metallicity for U values below the reported metal-insulator transition is obtained but the surprise comes for U values larger than the critical one (when a gap appears in the spectral density of states) because a steady increase of the normalized polarizability with size is obtained. This critical size-scaling behaviour can be understood as corresponding to a molecule which polarizability is unbounded. We have checked that a real transfer of charge from one chain end to the opposite occurs as a response to very small electric fields in spite of the existence of a large gap of the order of U for one-particle excitations. Finally, ab initio quantum chemistry calculations of realistic poly-acetylene chains prove that the occurrence of such critical behaviour in real systems is unlikely.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Conductance through the armchair graphene nanoribbons 9-AGNR: Strong dependence on contact to leads

  • Vergés Brotons, José Antonio
  • Chiappe, Guillermo
  • San-Fabián, Emilio
  • Louis, Enrique
  • Chiappe, Guillermo|||/items/cc74a785-b7fa-49c3-bc4c-5a4a1221ad13
The successful use of graphene nanoribbons (GNRs) in a variety of applications in nanoelectronics depends not only on reliable control of their forbidden gaps, but also on the understanding of the effects that contacts to leads may have on their conductance G. By combining Landauer's formalism and a simplified version of the embedded cluster method, G through suspended 9-AGNR has been calculated as a function of energy (sample bias) and the strength of the contact between the ribbon and leads attached to both zigzag edges. Green's functions of contacted ribbons have been derived from HF nonspin polarized solutions of the Pariser-Parr-Pople Hamiltonian. It is shown that the G associated with the two quasidegenerate states around the Fermi level, which are strongly localized at the zigzag edges, equals a conductance quantum G0 for very weak leads-ribbon coupling, decreasing to zero as that coupling increases. At the Fermi level G is zero for small coupling, increasing up to G0 for a value of coupling that depends on the GNR length, and, finally, decreasing to zero for large coupling. Conductance through other energies, starting at G=0 for no coupling, increases with coupling to the electrodes up to near one quantum at a pace that may appreciably depend on the particular molecular orbital. These results illustrate the difficulties that may be found in exploring practical uses of GNRs.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Are electron affinity and Ionization potential intrinsic parameters to predict the electron or hole acceptor character of amorphous molecular materials?

  • Louis, Enrique
  • San-Fabián, Emilio
  • Díaz-García, María A.
  • Chiappe, Guillermo
  • Vergés, José A.
Organic light emitting diodes (OLEDs) are current-driven devices that utilize light emission from excited states of molecules.(1) Operating OLEDs involves charge injection from the anode and the cathode into the adjacent organic layers, transport of injected charge carriers through the organic layers, and exothermic recombination of holes and electrons to generate electronically excited states of molecules. Subsequent deactivation of molecules produces electroluminescence (EL) that goes out of the device. Attaining high quantum efficiency for EL requires: (i) efficient charge injection from both electrodes into the adjacent organic layers at low drive voltage, (ii) charge balance, and (iii) confinement of charge carriers within the emitting layer to increase the probability of emissive recombination. The insertion of hole-acceptor and electron-acceptor layers between the electrodes and the emitting layer substantially increases efficiency. A multilayer structure of OLED’s consists of the emitting layer sandwiched between hole- and electron-acceptor layers that in turn are in contact with the metallic anode and cathode, respectively. Amorphous molecular materials have been proven to show several characteristics that qualify them as excellent materials to be used in OLED’s.(1) Their most remarkable feature is that, due to their homogeneous and isotropic properties, they form smooth thin films, allowing uniform contact with the metallic electrodes and between organic layers. An issue concerning nomenclature is here worthy of comment. As stated above, device operation involves three main processes, namely, charge injection, charge transport, and light emission. Although in this work we will only focus on the first, we shall also use the accepted terminology of hole- or electron-transporters, being aware of the fact that the correct one would be “acceptors” instead of ‘transporters” (investigating their transport performance(2) would require considering also carrier mobility). Hereafter both terminologies will be used indifferently., Financial support by the Spanish “Ministerio de Economía y Competitividad MINECO” and the European Union through FEDER funds (Grants FIS2012-35880, FIS2015-64222-C2-1-P, FIS2015-64222-C2-2-P, and MAT2015-66586-R) and the Universidad de Alicante, is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural and electronic changes of pentacene induced by potassium doping

  • Guijarro, A.
  • Vergés, José A.
Potassium is introduced into the crystalline herringbone structure of pentacene searching for a compound showing metallic electronic transport properties and, hopefully, superconductivity at small enough temperatures. Several possible structures for stoichiometric KPentacene (1:1), K2Pentacene (2:1), and K3Pentacene (3:1) compounds are theoretically investigated. Detailed densities of states for all of them are presented. As a more prominent result, a new monoclinic structure has been stabilized for the potassium richer material that could correspond to the recently synthesized superconducting phase of K3Pentacene. Although energetically unfavorable, it is the only metallic candidate found to date., Financial support by the Spanish Ministry of Economy and Competitiveness (Grants No. FIS2015-64222-C2-1-P and No. MAT2016-78625-C2-2-P) and the University of Alicante is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Elastic properties and mechanical tension of graphene

  • Ramírez, Rafael
  • Herrero, Carlos P.
Room-temperature simulations of graphene have been performed as a function of the mechanical tension of the layer. Finite-size effects are accurately reproduced by an acoustic dispersion law for the out-of-plane vibrations that, in the long-wave limit, behaves as ρω2=σk2+κk4. The fluctuation tension σ is finite (∼0.1 N/m) even when the external mechanical tension vanishes. Transverse vibrations imply a duplicity in the definition of the elastic constants of the layer, as observables related to the real area of the surface may differ from those related to the in-plane projected area. This duplicity explains the variability of experimental data on the Young modulus of graphene based on electron spectroscopy, interferometric profilometry, and indentation experiments., This work was supported by Dirección General de Investigación, MINECO (Spain) through Grants No. FIS2012-31713 and No. FIS2015-64222- C2-1-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electronic properties of single-layer antimony: tight-binding model, spin-orbit coupling, and the strength of effective Coulomb interactions

  • Rudenko, A. N.
  • Katsnelson, Mikhail I.
  • Roldán, Rafael
The electronic properties of single-layer antimony are studied by a combination of first-principles and tight-binding methods. The band structure obtained from relativistic density functional theory is used to derive an analytic tight-binding model that offers an efficient and accurate description of single-particle electronic states in a wide spectral region up to the mid-UV. The strong (λ=0.34 eV) intra-atomic spin-orbit interaction plays a fundamental role in the band structure, leading to splitting of the valence band edge and to a significant reduction of the effective mass of the hole carriers. To obtain an effective many-body model of two-dimensional Sb we calculate the screened Coulomb interaction and provide numerical values for the on-site V00 (Hubbard) and intersite Vij interactions. We find that the screening effects originate predominantly from the 5p states, and are thus fully captured within the proposed tight-binding model. The leading kinetic and Coulomb energies are shown to be comparable in magnitude, |t01|/(V00-V01)∼1.6, which suggests a strongly correlated character of 5p electrons in Sb. The results presented here provide an essential step toward the understanding and rational description of a variety of electronic properties of this two-dimensional material., This work was supported by Dirección General de Investigación, MINECO (Spain) through Grants No. FIS2012-31713 and No. FIS2015-64222- C2-1-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Transport and optical gaps in amorphous organic molecular materials

  • San-Fabián, Emilio
  • Louis, Enrique
  • Díaz-García, María A.
  • Chiappe, Guillermo
  • Vergés, José A.
[EN] The standard procedure to identify the hole- or electron-acceptor character of amorphous organic materials used in OLEDs is to look at the values of a pair of basic parameters, namely, the ionization potential (IP) and the electron affinity (EA). Recently, using published experimental data, the present authors showed that only IP matters, i.e., materials with IP > 5.7 (<5.7) showing electron (hole) acceptor character. Only three materials fail to obey this rule. This work reports ab initio calculations of IP and EA of those materials plus two materials that behave according to that rule, following a route which describes the organic material by means of a single molecule embedded in a polarizable continuum medium (PCM) characterized by a dielectric constant ε. PCM allows to approximately describe the extended character of the system. This “compound” system was treated within density functional theory (DFT) using several combinations of the functional/basis set. In the preset work ε was derived by assuming Koopmans’ theorem to hold. Optimal ε values are in the range 4.4–5.0, close to what is expected for this material family. It was assumed that the optical gap corresponds to the excited state with a large oscillator strength among those with the lowest energies, calculated with time-dependent DFT. Calculated exciton energies were in the range 0.76–1.06 eV, and optical gaps varied from 3.37 up to 4.50 eV. The results are compared with experimental data., Financial support by the Spanish Ministerio de Economía y Competitividad MINECO and the European Union through FEDER funds (grants FIS2012-35880, FIS2015-64222-C2-1-P, FIS2015-64222-C2-2-P and MAT2015-66586-R) and the Universidad de Alicante, is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gap opening in the most stable phases of K3 Terphenyl compound

  • Guijarro, Albert
  • Vergés, José A.
[EN] The crystalline structure of potassium intercalated para-terphenyl has been theoretically investigated using a van der Waals Density Functional (vdW-DF) scheme. The incorporation of K atoms into the pristine terphenyl crystal continuously improves the compound stability up to a 3:1 stoichiometry. In addition to confirming previously studied structures, several new crystalline phases showing inedited patterns -small clusters formed by four to six potassium atoms- have been found, in particular, for the more stable KTerphenyl crystals. Initially, the band structure of these compounds shows metallic features. Nevertheless, a better description of the electronic structure using hybrid functionals that go beyond generalized-gradient-approximation (GGA) reveals that potassium electrons completely filled three sub-bands that develop at the conduction band bottom. Consequently, these stable phases should be discarded as metallic phases able to show superconductivity at low temperatures. Moreover, our study evidences that due to the important electronic correlations shown by these compounds only computational schemes that go beyond GGA are able to provide robust conclusions., inancial support by the Spanish Ministry of Economy and Competitiveness (FIS2015-64222-C2-1-P and MAT2016-78625-C2-2-P), the Generalitat Valenciana (GrantPROMETEO/2017/139) and the University of Alicante is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterization of Main Phase in Kxp-Terphenyl and Its Largest Congener Kxpoly(p-phenylene): A Report of Their Magnetic and Electric Properties

  • Carrera, Manuel
  • Mcdonald, James L.
  • Untiedt, Carlos
  • García-Hernández, Mar
  • Mompean, Federico J.
  • Vergés, José A.
  • Guijarro, Albert
[EN] The report of the Meissner effect in annealed samples of K3Tp (Tp = p-terphenyl) above 120 K has raised the interest in this deceptively simple material concerning superconductivity. We have investigated the structural integrity of the Tp framework in the annealed samples of KxTp at increasing processing time and temperature T. Our experimental studies show that both K2Tp and K3Tp mixing stoichiometries have identical Raman (solid state) and UV–vis (1,2-dimethoxyethane solution) spectra, being consistent with the molecular dianion by density functional theory and time-dependent density functional theory simulations. Magnetization vs T plots show no signs of superconductivity and neither do conductance vs T plots. Searching for potentially active minor byproducts formed during thermal processing, the role of K-doped poly(p-phenylene) has been examined, but it does not seem to explain the reported effects either. Further efforts are needed to explain the nature of this elusive phenomenon., Financial support by the Spanish Ministry of Economy and Competitiveness (FIS2015-64222-C2-1-P, MAT2014-52405-C2-2-R, and MAT2016-78625-C2-1-2-P), the Generalitat Valenciana (Grant PROMETEO/2017/139), and the University of Alicante (VIGROB-285) is gratefully acknowledged. M.C. thanks the VIDI of the University of Alicante for a predoctoral grant. A.G. greatly appreciates the computational resources provided by the Department of Applied Physics of the University of Alicante.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electron enrichment of zigzag edges of armchair–oriented graphene nano–ribbons increases their stability and induces pinning of Fermi level

  • Louis, Enrique
  • San-Fabián, Emilio
  • Chiappe, Guillermo
  • Vergés, José A.
[EN] Zigzag edges of neutral armchair–oriented Graphene Nano–Ribbons show states strongly localized at those edges. They behave as free radicals that can capture electrons during processing, increasing ribbon's stability. Thus, charging and its consequences should be investigated. Total energy calculations of finite ribbons using spin–polarized Density Functional Theory (DFT) show that ribbon's charging is feasible. Energies for Pariser-Parr-Pople (PPP) model Hamiltonian are compatible with DFT allowing the study of larger systems. Results for neutral ribbons indicate: i) the fundamental gap of spin–polarized (non–polarized) solutions is larger (smaller) than experimental data, ii) the ground state is spin–polarized, a characteristic still not observed experimentally. Total energy of GNRs decreases with the number of captured electrons reaching a minimum for a number that mainly depends on zigzag–edges size. The following changes with respect to neutral GNRs are noted: i) the ground state is not spin–polarized, ii) fundamental gap is in-between that of spin–polarized and non–polarized solutions of neutral ribbons, iii) while in neutral ribbons valence and conduction band onsets vs. the fundamental gap, linearly and symmetrically approach mid–gap with slope 0.5, charging induces Fermi level pinning, i.e., the slopes of the valence and conduction bands being about 0.1 and 0.9, in agreement with experiment., This work has been Partial financial support by the Spanish “Ministerio de Ciencia, Innovación y Universidades”(Grants FIS2015-64222-C2-1-P, FIS2015-64222-C2-2-P, MAT2016-77742-C2-2-P and AYA2015-66899-C2-2-P), and the Universidad de Alicante is gratefully acknowledged.