Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Robustness-based assessment and monitoring of steel truss railway bridges to prevent progressive collapse

  • Porcu, Maria Cristina
  • Garau, Michele
  • Cocco, Mariano F.
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Adam, Jose M|||0000-0002-9205-8458
[EN] Risks of bridge collapse were and continue to be real as evidenced by classical (e.g. Québec Bridge, Canada 1919; Seongsu Bridge, South Korea 1994) and recent (e.g. Skagit River Bridge, USA 2013; Francis Scott Key Bridge, USA 2024) episodes of catastrophic collapses. The causes of each collapse are diverse (e.g. natural disasters, changing conditions, design errors, intentional attacks). Still, the conclusions are always the same: deaths, injuries and large amounts of direct and indirect economic losses. In order to avoid these catastrophes, structural robustness and monitoring strategies can be used to analyse the bridge¿s vulnerability and anticipate any local-initial failure that can spread to the whole structure in the form of a progressive collapse. The objective of this work was to use an integrative threat-dependent and threat-independent approach to analyse the structural robustness of a never-before-studied U-shaped open cross-section steel truss railway bridge structure. Eight failure scenarios were considered and analysed through computational modelling. The extracted results make it possible: (i) to connect structural robustness analysis outputs with the definition of a new structural health monitoring strategy of the bridge; and (ii) to implement the conclusions in the real bridge with more than 100 sensors and a non-assisted alarm system for preventing progressive collapse., The authors wish to acknowledge the funding received by Grant PID2021-124236OB-C31 funded by MCIN/AEI/10.13039/501100011033 and ERDF A Way of Making Europe , and for funding received under the postdoctoral Grant IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR . We would also like to extend our gratitude to the Calsens Spin-Off company Members, Ferrocarrils de la Generalitat Valenciana (FGV), and the Multimedia Communication Group (COMM) of the iTeam Research Institute of the UPV for their invaluable cooperation and recommendations.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Corner-column failure scenarios in building structures: Current knowledge and future prospects

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
  • Shahnazi, Ghobad
[EN] Over the past few decades, increasing awareness of the need for more resilient infrastructure has led to a great increase in the amount of research being performed on the progressive collapse and structural robustness of buildings. Due to their widespread use, much of this research has focused on framed structures. Given the important role of columns in this type of structure, the analysis of the effect of their failure on structural systems has emerged as one of the most useful tools for studying structural robustness. However, the majority of such studies have focused on the removal of internal or edge columns rather than corner columns, which are in principle more vulnerable in many aspects. Although this situation suggests that more research may be needed to improve our understanding in this regard, the large amount of research performed in the field of progressive collapse means that it can be challenging to identify and prioritise the most important research needs. This review article aims to address this challenge through a comprehensive overview and analysis of past research involving corner-column failure scenarios in cast-in-place reinforced concrete (RC), precast concrete, and steel framed buildings. This analysis has made it possible to establish the most important research findings on corner- column failures, to define the limitations of what has been done so far, and to identify the most significant gaps in knowledge to be prioritised by future research., The authors would like to express their gratitude for funding received under grant IJC2020-042642-I funded by MCIN/AEI/ 10.13039/501100011033 and by European Union NextGenerationEU/ PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Robustez estructural de edificios en España. Investigaciones recientes en la Universitat Politècnica de València, Structural Robustness of Buildings in Spain. Recent Research at the Universitat Politècnica de València

  • Rueda-García, Lisbel|||0000-0002-2061-1656
  • Barros-González, Brais|||0000-0001-7132-5951
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[ES] El incremento constante de eventos extremos hace necesario contar con edificios robustos capaces de soportar daños iniciales locales sin que se produzca una propagación de fallos que afecte a toda o gran parte de la estruc-tura. Este artículo analiza el estado actual de la normativa y la investigación en España sobre robustez estructural de edificios, más concretamente aquella llevada a cabo en la Universitat Politècnica de València, proporcionando una visión global sobre robustez tanto para profesionales del sector como investigadores. Aunque el Código Es-tructural español menciona la necesidad de edificios robustos, carece de indicaciones claras sobre su implementa-ción, lo que lleva a la posible adopción de normativas internacionales, como el Eurocódigo 1 Parte 1-7 o la UFC 4-023-03 de EE.UU. Estas normativas contemplan diferentes estrategias para diseñar edificios robustos, entre las que destacan el método de las fuerzas de atado, el método de los caminos de carga alternativos y el diseño de elementos clave. Las características principales de estos métodos también se describen en este artículo. A nivel de investigación, España presenta avances significativos ya que existen importantes proyectos que introducen estrategias innovadoras tanto para mejorar la robustez de estructuras existentes como para frenar el colapso una vez éste se ha iniciado. Estos proyectos destacan el potencial nacional en el desarrollo de enfoques avanzados y efectivos en materia de robustez., Este trabajo no habría sido posible sin el apoyo de la Generalitat Valenciana por la subvención otorgada al proyecto ENHANCE (CIPROM/2022/47), así como al MCIN/ AEI/10.13039/501100011033 y a la "Unión Europea NextGenerationEU/PRTR" por la financiación recibida a través de la beca postdoctoral IJC2020-042642-I. Asimismo, los autores agradecen el apoyo recibido para el desarrollo del proyecto ENTIRE, financiado en el marco de la convocatoria de Ayudas para Primeros Proyectos de Investigación (PAID-06-22) del Vicerrectorado de Investigación de la Universitat Politècnica de València. De igual manera, este artículo forma parte del proyecto ENFORCE, financiado por la convocatoria PAID-06-24 del mismo Vicerrectorado.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An ML-based framework for predicting prestressing force reduction in reinforced concrete box-girder bridges with unbonded tendons

  • Calò, Mirko
  • Ruggieri, Sergio
  • Nettis, Andrea
  • Uva, Giuseppina
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[EN] The paper presents a machine learning (ML) based framework to predict the prestressing force reduction in prestressed reinforced concrete (PSC) box-girder bridges with unbonded tendons. In the field of road network safety, the reliable assessment of some bridge typologies, such as PSC box-girder bridges, depends on different aspects, among which the inaccessibility of internal unbonded tendons, the difficulty in measuring the effective prestressing force reduction over time, the design of an efficient structural health monitoring (SHM) system. To address the above issues, the proposed approach exploits the results of experimental tests on a scaled PSC box-girder to validate a nonlinear modelling strategy and, in turn, to generate a sample dataset for training different ML algorithms. To ensure generalizability of the proposed ML model, the variability of several parameters, including geometrical and mechanical properties, was accounted for. The obtained results, evaluated in terms of statistical metrics and through an eXplainability approach, revealed that the proposed surrogate model is able to predict the prestressing force reduction for this bridge typology, knowing the current prestressing force, the elastic modulus of the concrete, and the strain variation in specific cross-sections of the structure. The application of the framework on a scaled PSC box-girder experimentally tested, demonstrated its suitability for: i) estimating the prestressing force reduction without employing periodic and expensive onsite tests; and ii) providing the best strategy for employing a sensor-based SHM system., Mirko Calo ` acknowledges funding by Italian Ministry of University and Research, within the project PON-Ricerca e Innovazione2014 2020, CUP Code (D.M. 10/08/2021, n. 1061): D95F21002340006. Sergio Ruggieri acknowledges funding by Italian Ministry of University and Research, within the project PON-Ricerca e Innovazione-2014 2020, CUP Code (D.M. 10/08/2021, n. 1062): D95F21002140006. Manuel Buitrago declares funding received under the postdoctoral Grant IJC2020-042642-I funded by MCIN/AEI/ 10.13039/501100011033 and by the European NextGenerationEU/ PRTR . Andrea Nettis and Giuseppina Uva acknowledge the Sustainable Mobility National Research Center (MOST) and received funding from the European Union Next-GenerationEU (PIANO NAZIONALE DI RIPRESA E RESILIENZA (PNRR) MISSIONE 4 COMPONENTE 2, INVESTIMENTO 1.4 D.D. 1033 17/06/2022, CN00000023) - SPOKE 7 CCAM, Connected Networks and Smart Infrastructure - WP4 (CUP D93C22000410001). Finally, Jose M. Adam and all co-authors acknowledge the invaluable cooperation of the Calsens Spin-off company during the execution of the test of the scaled bridge.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Failure analysis after the progressive collapse of a precast building

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Setiawan, Andri
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Gerbaudo, Maria Luz|||0009-0003-2838-0316
  • Marin, Lorenzo|||0000-0002-7117-1291
  • Cetina-Berdugo, Diego Fernando|||0009-0008-2884-9694
  • Caredda, Giacomo|||0000-0002-6888-0409
  • Oliver-Cano, Marina
  • Adam, Jose M|||0000-0002-9205-8458
  • Sempértegui, Geovanny
[EN] As buildings have to face more frequent and intense extreme events due to a changing climate and rising geopolitical tensions, the need for more robust structures that are insensitive to initial failures is now arguably more important than ever before. In this context, this article presents an in-depth analysis of the damage and failures that occurred during the partial progressive collapse test of a purposely built 15×12 m precast building with two floors. The building was designed to ensure load redistribution after the failure of single columns and also to segment parts of the structure from a larger initial failure that inevitably triggers a collapse. The ability of the structure to arrest collapse propagation was tested experimentally successfully isolating the collapse to the initially affected area. Based on visual inspections supported by computational simulations, failure mechanisms occurring in the collapsed area and damages in the upright part of the structure are analysed in detail in this article. Mechanisms that enabled the separation of the building in two parts are also studied. The presented results lead to an improved understanding of failure mechanisms causing collapse propagation and provide insights on how such propagation can be arrested., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant agreement No. 101000396). The authors would also like to express their gratitude for funding received under the postdoctoral Grant IJC2020-042642-I funded by MCIN/AEI/ 10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR", for funding received by the First Research Projects call (PAID-06-22) from the Vice-rectorate for Research of the Universitat Politecnica de Valencia, and for funding for open access charge by CRUE- Universitat Politecnica de Valencia. The research presented in this article would not have been possible without the assistance of the following colleagues from the ICITECH institute in preparing and executing the full-scale building test: Juan J. Moragues, Pedro A. Calderon, Daniel Tasquer, Ana Sanchez-Rodriguez, Eduardo J. Mezquida-Alcaraz and Ghobad Shahnazi. The authors are also grateful to the Levantina, Ingenieria y Construccion S.L. (LIC) company for providing human resources and access to their facilities for testing. Finally, the authors wish to thank Ayman Elfouly and Applied Science International-LLC for their support in performing simulations.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Robustness of a full-scale precast building structure subjected to corner-column failure

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Moragues, Juan J|||0000-0001-8111-5480
  • Adam, Jose M|||0000-0002-9205-8458
  • Sagaseta, Juan
[EN] Although many analytical and experimental studies have been carried out to date on the progressive collapse and robustness of cast-in-place reinforced concrete (RC) and steel building structures, very few experimental research works have been performed on precast concrete (PC) structures. The small number of publications on these experiments have focused on analysing the behaviour of subassemblies after the sudden loss of an internal column. This paper is the first to describe the construction of a full-scale purpose-built experimental PC building to study the sudden removal of corner columns and the structure¿s ability to find alternative load paths (ALPs). The connections between the precast members were designed using existing simplified guidance for robustness. The results obtained from the test using gravity loads corresponding to typical load combinations defined in building codes for accidental design situations, showed a structural response governed by Vierendeel action with a clear contribution from the floor slabs. Load increase factors were obtained from the test results which can be applied by practitioners using simplified linear finite element models to account for non-linear dynamic effects in a simplified manner. This work is expected to form part of a large database of experimental results that are useful for developing advanced numerical simulations and parametric analyses., The authors wish to acknowledge the grant awarded for the PRE-BUST project (ref: BIA2017-88322-R-AR) funded by MCIN/AEI/10.13039/501100011033 and " ERDF A Way of Making Europe " . The authors would also like to express their gratitude for funding received under the postdoctoral programs of the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101] and Grant IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by the " European Union NextGenerationEU/PRTR " . We are also grateful for the invalu- able cooperation of the company Levantina, Ingeniena y Construccion S.L. (LIC) and the contribution of the members and collaborators of the Building Resilient research group (Pedro A. Calderon, Daniel Tasquer, Ghobad Shahnazi, Ana Sanchez, Lorenzo Marin, Giacomo Caredda, Diego F. Cetina, Maria L. Gerbaudo, Marina Oliver) . We would like to give special thanks to Eduardo J. Mezquida-Alcaraz for his work in preparing and carrying out the test.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Robustness of a full-scale precast building structure after edge column failure

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Setiawan, Andri
  • Adam, Jose M|||0000-0002-9205-8458
  • Sagaseta, Juan
[EN] A full-scale purposely built precast concrete building, designed to comply with robustness requirements in current building codes, was subjected to two different scenarios of sudden edge-column removal under the accidental load combination established by the codes. The main aim of this study was to assess how the structural system can prevent collapse initiation after the removal of a single edge column at different locations. This building was later subjected to a larger initial failure with the aim of arresting collapse propagation as part of another piece of research and outside the scope of this specific study. The building was highly instrumented providing unique data at a building system level for the understanding of the development of alternative load paths after the column removals. This work is novel since existing tests of edge-column removal from precast systems correspond mostly to simplified beam-column-slab subassemblies where the interaction with the rest of the building is neglected. The results obtained from this work are particularly relevant towards understanding the role of tying systems used in precast concrete buildings under different accidental scenarios using typical load combinations defined in building codes. The structure was able to redistribute the loads after each column was removed due to a combination of Vierendeel and compressive arching and membrane actions, leading to very small deflections. The role of vertical, horizontal, and floor tying systems in providing continuity between prefabricated and hybrid members was analysed in view of the experimental results obtained. The response obtained differed significantly from design assumptions commonly adopted for tying systems that rely on tensile catenary action at large deflections. This research is timely considering the push to adopt prefabricated components in building construction driven by Net Zero targets while maximising robustness of buildings subjected to more extreme events exacerbated by climate change., The authors wish to acknowledge the funding received by Grant BIA2017-88322-R-AR funded by MCIN/AEI/10.13039/501100011033 and "ERDF A Way of Making Europe", and by a project (Endure) that has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant agreement No. 101000396) . The authors would also like to ex-press their gratitude for funding received under the postdoctoral programs of the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101] and Grant IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGener-ationEU/PRTR". We are also grateful for the invaluable cooperation of the company Levantina, Ingenieria y Construccion S.L. (LIC) and the contribution of the members and collaborators of the ICITECH research group.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Progressive collapse: Past, present, future and beyond

  • Elkady, Nada
  • Augusthus Nelson, Levingshan
  • Weekes, Laurence
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Buitrago, Manuel|||0000-0002-5561-5104
[EN] The world has seen a surge in rigorous study efforts on the progressive collapse of structures in the past few decades. These events have led to new standards and provisions in building codes of practice, many of which are still being developed and updated today. Although there have been some excellent reviews covering different aspects of progressive collapse, the sheer volume of research performed in this area in recent years means that highly relevant investigation methods and research findings are not covered by them. To fill this void, this review article aims to provide an up-to-date and comprehensive overview of progressive collapse research on building structures. The review is organised into eight sections that cover: (1) essential background information; (2) prominent collapse cases; (3) progressive collapse typology; (4) design standards; (5) investigation methods; (6) prevention and mitigation strategies; (7) structural types and characteristics that require special consideration; and (8) future research needs. In addition to the fundamental concepts, this review encompasses recent advances, such as employing physics and game engines, and machine learning to study progressive collapse. It also explores the potential future applications of these new concepts in research. Furthermore, the review emphasises recent progress in improving the robustness of timber and modular structures. Therefore, this review provides a crucial resource to acquire a global overview of current state-of-the-art progressive collapse research and future requirements, making it valuable to both novice and experienced practitioners and researchers., Part of the review has been funded by the Enroot project, which has received funding from Generalitat Valenciana - Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Spain under the GE 2023 call (CIGE/2022/120) .