Skip to main content

FORMULACION Y CARACTERIZACION DE BIOPOLIMEROS PARA SISTEMAS LAMINADOS EN ENVASADO DE ALIMENTOS

MAT2011-28468-C02-01

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bionanocomposite films based on plasticized PLA PHB/cellulose nanocrystal blends

  • ARRIETA, Marina Patricia
  • Fortunati, E.
  • Dominici, F.
  • Kenny, J. M.
  • López-Martínez, Juan|||0000-0001-6904-2282
Optically transparent plasticized poly(lactic acid) (PLA) based bionanocomposite films intended for food packaging were prepared by melt blending. Materials were plasticized with 15 wt% of acetyl(tributyl citrate) (ATBC) to improve the material process ability and to obtain flexibile films. Poly(hydroxybutyrate) (PHB) was used to increase PLA crystallinity. The thermal stability of the PLA-PHB blends was improved by the addition of 5 wt% of cellulose nanocrystals (CNC) or modified cellulose nanocrystals (CNCs) synthesized from microcrystalline cellulose. The combination of ATBC and cellulose nanocrystals, mainly the better dispersed CNCs, improved the interaction between PLA and PHB. Thus, an improvement on the oxygen barrier and stretchability was achieved in PLA-PHB-CNCs-ATBC which also displayed somewhat UV light blocking effect. All bionanocomposite films presented appropriate disintegration in compost suggesting their possible applications as biodegradable packaging materials. (C) 2014 Elsevier Ltd. All rights reserved., Authors wish to acknowledge Spanish Ministry of Science and Innovation (MAT2011-28468-C02-01 and 02), Prof. A. Jimenez and Dr. Nuria Burgos (University of Alicante, Spain) for their assistance in OTR measurements and Gesenu S.p.a. for compost supply. M.P. Arrieta wishes to thank Generalitat Valenciana for Santiago Grisolia Fellowship (2011/007) and Universitat Politecnica de Valencia for the Development Support Programme PAID-00-12 (SP20120120).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Combined effect of poly(hydroxybutyrate) and plasticizers on polylactic acid properties for film intended for food packaging

  • ARRIETA, Marina Patricia
  • JIMENEZ MIGALLON, ALFONSO
  • Samper, María-Dolores|||0000-0002-5102-8412
  • López-Martínez, Juan|||0000-0001-6904-2282
Poly(lactic acid) PLA, and poly(hydroxybutyrate) PHB, blends were processed as films and characterized for their use in food packaging. PLA was blended with PHB to enhance the crystallinity. Therefore, PHB addition strongly increased oxygen barrier while decreased the wettability. Two different environmentally-friendly plasticizers, poly(ethylene glycol) (PEG) and acetyl(tributyl citrate) (ATBC), were added to these blends to increase their processing performance, while improving their ductile properties. ATBC showed higher plasticizer efficiency than PEG directly related to the similarity solubility parameters between ATBC and both biopolymers. Moreover, ATBC was more efficiently retained to the polymer matrix during processing than PEG. PLA PHB ATBC blends were homogeneous and transparent blends that showed promising performance for the preparation of films by a ready industrial process technology for food packaging applications, showing slightly amber color, improved elongation at break, enhanced oxygen barrier and decreased wettability., This work has been supported by the Spanish Ministry of Economy and Competitiveness (MAT2011-28648-C02-01 and MAT2011-28468-C02-02) M.P. Arrieta is Granted by Santiago Grisolia program (GRISOLIA/2011/007). Authors gratefully acknowledge Prof. Arturo Horta Zubiaga from National University of Distance Education (UNED) Spain for his valuable discussion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multifunctional PLA PHB/cellulose nanocrystal films: Processing, structural and thermal properties

  • ARRIETA, Marina Patricia
  • Fortunati, E.
  • Dominici, F.
  • Kenny, J. M.
  • E. Rayón|||0000-0002-0653-2046
  • López-Martínez, Juan|||0000-0001-6904-2282
Cellulose nanocrystals (CNCs) synthesized from microcrystalline cellulose by acid hydrolysis were added into poly(lactic acid)-poly(hydroxybutyrate) (PLA-PHB) blends to improve the final properties of the multifunctional systems. CNC were also modified with a surfactant (CNCs) to increase the interfacial adhesion in the systems maintaining the thermal stability. Firstly, masterbatch pellets were obtained for each formulation to improve the dispersion of the cellulose structures in the PLA-PHB and then nanocomposite films were processed. The thermal stability as well as the morphological and structural properties of nanocomposites was investigated. While PHB increased the PLA crystallinity due to its nucleation effect, well dispersed CNC and CNCs not only increased the crystallinity but also improved the processability, the thermal stability and the interaction between both polymers especially in the case of the modified CNCs based PLA-PHB formulation. Likewise, CNCs were better dispersed in PLA-CNCs and PLA-PHB-CNCs, than CNC. (C) 2014 Elsevier Ltd. All rights reserved., This research was supported by the Ministry of Science and Innovation of Spain (MAT2011-28468-C02-01 and MAT201128468-0O2-02). M.P. Arrieta thanks Generalitat Valenciana (Spain) for Santiago Grisolia Fellowship (GRISOLIA/2011/007) and Universitat Politecnica de Valencia for the Development Support Programme PAID-00-12 (SP20120120).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

PLA-PHB/cellulose based films: Mechanical, barrier and disintegration properties

  • Arrieta, Marina Patricia
  • Fortunati, E.
  • Dominici, F.
  • Kenny, J. M.
  • E. Rayón|||0000-0002-0653-2046
  • López-Martínez, Juan|||0000-0001-6904-2282
Nanocomposite films based on poly(lactic acid)-poly(hydroxybutyrate) (PLA-PHB) blends and synthesized cellulose nanocrystals (CNC) or surfactant modified cellulose nanocrystals (CNCs), as bio-based reinforcement, were prepared by melt extrusion followed by film forming. The obtained nanocomposites are intended for short-term food packaging. Thus, the mechanical, optical, barrier and wettability properties were studied. Functionalized CNCs contribute to enhance the interfacial adhesion between PLA and PHB, leading to improved mechanical stiffness and increased film stretchability. The synergic effects of the PHB and CNCs on the PLA barrier properties were confirmed by increases in oxygen barrier properties and reductions in surface wettability of the nanocomposites. In addition, the measurements of the viscosity molecular weight for ternary systems showed practically no degradation of PLA and smaller degradation of PHB during processing due to nanocrystal presence. The disintegration process in composting conditions of PLA was delayed by the addition of PHB, while CNC speeded it up. PLA-PHB-CNCs formulations showed enhanced mechanical performance, improved water resistance, reduced oxygen and UV-light transmission, as well as appropriate disintegration in compost suggesting possible applications as packaging materials. (C) 2014 Elsevier Ltd. All rights reserved., This research was supported by the Ministry of Science and Innovation of Spain (MAT2011-28468-C02-01 and MAT2011-28468-C02-02). M.P. Arrieta thanks Generalitat Valenciana (Spain) for Santiago Grisolia Fellowship (GRISOLIA/2011/007) and Universitat Politecnica de Valencia for the Development Support Programme PAID-00-12 (SP20120120). The Authors acknowledge Gesenu S.p.a. for compost supply. Authors gratefully thank Prof. Alfonso Jimenez (University of Alicante, Spain) and Prof. Maria Dolores Salvador Moya (Universitat Politecnica de Valencia) for their assistance with OTR measurements and optical microscope-EDF measurements, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Functional properties of sodium and calcium caseinate antimicrobial active films containing carvacrol

  • ARRIETA, Marina Patricia
  • Peltzer, Mercedes Ana
  • Garrigós Selva, María del Carmen
  • Valente, Artur J. M.
  • JIMENEZ MIGALLON, ALFONSO
  • López-Martínez, Juan|||0000-0001-6904-2282
Active edible films were prepared by adding carvacrol into sodium caseinate (SC) and calcium caseinate (CC) matrices plasticized with two different glycerol concentrations (25 and 35 wt%) prepared by solvent casting. Functional characterisation of these bio-films was carried out by determination of some of their physico-chemical properties, such as colour, transparency, oxygen barrier, wettability, dye permeation properties and antibacterial effectiveness against Gram negative and Gram positive bacteria. All films exhibited good performance in terms of optical properties in the CIELab space showing high transparency. Carvacrol was able to reduce CC oxygen permeability and slightly increased the surface hydrophobicity. Dye diffusion experiments were performed to evaluate permeation properties. The diffusion of dye through films revealed that SC was more permeable than CC. The agar diffusion method was used for the evaluation of the films antimicrobial effectiveness against Escherichia cell and Staphylococcus aureus. Both SC and CC edible films with carvacrol showed inhibitory effects on both bacteria. (C) 2013 Elsevier Ltd. All rights reserved., This research was supported by the Ministry of Science and Innovation of Spain through the projects MAT2011-28468-C02-01, MAT2011-28468-C02-02 and HP2008-0080. M.P. Arrieta thanks Fundacion MAPFRE for "Ignacio Hernando de Larramendi 2009-Medio Ambiente" fellowship (MAPFRE-IHL-01). Authors thank Ferrer Alimentacion S.A., for providing the caseinates powders.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ternary PLA-PHB-Limonene blends intended for biodegradable food packaging applications

  • ARRIETA, Marina Patricia
  • Hernández, Alberto
  • Rayón Encinas, Emilio
  • López-Martínez, Juan|||0000-0001-6904-2282
In this work poly(lactic acid) PLA, and poly(hydroxybutyrate) PHB, were blended and plasticized with a natural terpene d-limonene (LIM) with the dual objective to increase PLA crystallinity and to obtain flexible films intended for food packaging applications. Materials were melt-blended and processed in transparent films. Structural and surfaces properties were evaluated. Moreover, functional properties were studied by means colorimetric parameters, oxygen permeation and water resistant measurements. In addition, thermal stability, crystallization behavior, mechanical as well as nanomechanical properties were investigated. FTIR spectra showed the characteristic bands corresponding to PLA and PHB and their rather molecular interaction. Py-GC/MS showed the characteristics peak of d-limonene as well as the thermal degradation products of PLA and PHB. d-limonene amount after processing was higher in PHB incorporated samples. PHB produced a reinforcing effect in PLA matrix and therefore an improvement in the oxygen barrier properties and the surface water resistance. Moreover, Scanning Confocal Microscopy surface images showed the dispersion of PHB crystal in PLA matrix. The influences of plasticization process on the mechanical properties showed that d-limonene provoked an increase in elongation at break. Disintegrability under composting conditions was also investigated and it was observed that PHB delays the PLA disintegrability under composting while d-limonene speed it up. In brief, the best results regarding structural, thermal, barrier and mechanical properties were found for the ternary PLA PHB LIM film. (C) 2013 Elsevier Ltd. All rights reserved., This work has been supported by the Spanish Ministry of Science and Innovation (MAT2011.-28468-C02-01 and MAT2011-28468-C02-02). M.P. Arrieta is granted by Santiago Grisolia program (GRISOLIA/2011/007). Authors gratefully acknowledge Prof. Alfonso Jimenez (University of Alicante) for his assistance with OTR measurements and Prof. IN,P Dolores Salvador (Polytechnic University of Valencia) for her assistance with nanomechanical and optical microscope analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Disintegrability under composting conditions of plasticized PLA-PHB blends

  • Arrieta, Marina Patricia
  • Jiménez, A.
  • López-Martínez, Juan|||0000-0001-6904-2282
  • E. Rayón|||0000-0002-0653-2046
The disintegration under composting conditions of films based on poly(lactic acid) poly(hydroxybutyrate) (PLA-PHB) blends and intended for food packaging was studied. Two different plasticizers, poly(ethylene glycol) (PEG) and acetyl-tri-n-butyl citrate (ATBC), were used to limit the inherent brittleness of both biopolymers. Neat PLA, plasticized PLA and PLA-PHB films were processed by melt-blending and compression molding and they were further treated under composting conditions in a laboratory-scale test at 58 +/- 2 degrees C. Disintegration levels were evaluated by monitoring their weight loss at different times: 0, 7, 14, 21 and 28 days. Morphological changes in all formulations were followed by optical and scanning electron microscopy (SEM). The influence of plasticizers on the disintegration of PLA and PLA-PHB blends was studied by evaluating their thermal and nanomechanical properties by thermogravimetric analysis (TGA) and the nanoindentation technique, respectively. Meanwhile, structural changes were followed by Fourier transformed infrared spectroscopy (FTIR). The ability of PHB to act as nucleating agent in PLA-PHB blends slowed down the PLA disintegration, while plasticizers speeded it up. The relationship between the mesolactide to lactide forms of PLA was calculated with a Pyrolysis-Gas Chromatography-Mass Spectrometry device (Py-GC/MS), revealing that the mesolactide form increased during composting. (C) 2014 Elsevier Ltd. All rights reserved., Authors thank Spanish Ministry of Economy and Competitiveness by financial support (MAT2011-28468-C02-01 and MAT2011-28468-C02-02). M.P. Arrieta thanks Generalitat Valenciana for Santiago Grisolia Fellowship (2011/007). Authors gratefully acknowledge Prof. M<SUP>a</SUP> Dolores Salvador (Polytechnic University of Valencia) for her assistance with nanomechanical and optical microscope analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structure and mechanical properties of sodium and calcium caseinate edible active films with carvacrol

  • ARRIETA, Marina Patricia
  • Peltzer, Mercedes A.
  • Garrigós, María del Carmen
  • Jimenez, Alfonso
Edible active films based on sodium caseinate (SC) and calcium caseinate (CC) plasticized with glycerol (G) at three different concentrations and carvacrol (CRV) as active agent were prepared by solvent casting. Transparent films were obtained and their surfaces were analysed by optical microscopy and scanning electron microscopy (SEM). The influence of the addition of three different plasticizer concentrations was studied by determining tensile properties, while Fourier transformed infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) were used to evaluate the structural and thermal behavior of such films. The addition of glycerol resulted in a reduction in the elastic modulus and tensile strength, while some increase in the elongation at break was observed. In general terms, SC films showed flexibility higher than the corresponding CC counterparts. In addition, the presence of carvacrol caused further improvements in ductile properties suggesting the presence of stronger interactions between the protein matrix and glycerol, as it was also observed in thermal degradation studies. FTIR spectra of all films showed the characteristic bands and peaks corresponding to proteins as well as to primary and secondary alcohols. In summary, the best results regarding mechanical and structural properties for caseinates-based films containing carvacrol were found for the formulations with high glycerol concentrations., Marina Patricia Arrieta thanks Fundacion MAPFRE for "Ignacio Hernando de Larramendi 2009- Medio Ambiente" fellowship (MAPFRE-IHL-01). The Spanish Ministry of Economy and Competitiveness is acknowledged by financial support (project Ref. MAT2011-28468-C02-01). Authors thank to Ferrer Alimentacion S.A., for providing caseinates and to Prof. Juan Lopez Martinez (Polytechnic University of Valencia, Spain) for his collaboration and useful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Plasticized poly(lactic acid)-poly(hydroxybutyrate) (PLA-PHB) blends incorporated with catechin intended for active food-packaging applications

  • ARRIETA, Marina Patricia
  • Castro-López, María del Mar
  • Barral-Losada, Luis Fernando
  • López-Vilariño, J.M
  • González-Rodríguez, María Victoria
  • E. Rayón|||0000-0002-0653-2046
  • López-Martínez, Juan|||0000-0001-6904-2282
Active biobased packaging materials based on poly(lactic acid)-poly(hydroxybutyrate) (PLA-PHB) blends were prepared by melt blending and fully characterized. Catechin incorporation, as antioxidant compound, enhanced the thermal stability, whereas its release was improved by the addition of acetyl(tributyl citrate) (ATBC) as plasticizer. Whereas the incorporation of ATBC resulted in a reduction of elastic modulus and hardness, catechin addition produced more rigid materials due to hydrogen-bonding interactions between catechin hydroxyl groups and carbonyl groups of PLA and PHB. The quantification of catechin released into a fatty food simulant and the antioxidant effectiveness after the release process were demonstrated. The effect of the materials' exposure to a food simulant was also investigated. PHB-added materials maintained their structural and mechanical properties after 10 days in a test medium that represents the worst foreseeable conditions of the intended use. Thus, plasticized PLA-PHB blends with catechin show their potential as biobased active packaging for fatty food, This work has been supported by the Spanish Ministry of Economy and Competitiveness (MAT2011-28648-C02-01 and MAT2011-28468-C02-02). M.P.A. is a recipient of a Santiago Grisolia Fellowship (Generalitat Valenciana) (GRISOLIA/2011/007).