Skip to main content

PROCESADO DE SISTEMAS LAMINADOS EN BASE BIOPOLIMERICA PARA EL ENVASADO ACTIVO DE ALIMENTOS

MAT2011-28468-C02-02

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bionanocomposite films based on plasticized PLA PHB/cellulose nanocrystal blends

  • ARRIETA, Marina Patricia
  • Fortunati, E.
  • Dominici, F.
  • Kenny, J. M.
  • López-Martínez, Juan|||0000-0001-6904-2282
Optically transparent plasticized poly(lactic acid) (PLA) based bionanocomposite films intended for food packaging were prepared by melt blending. Materials were plasticized with 15 wt% of acetyl(tributyl citrate) (ATBC) to improve the material process ability and to obtain flexibile films. Poly(hydroxybutyrate) (PHB) was used to increase PLA crystallinity. The thermal stability of the PLA-PHB blends was improved by the addition of 5 wt% of cellulose nanocrystals (CNC) or modified cellulose nanocrystals (CNCs) synthesized from microcrystalline cellulose. The combination of ATBC and cellulose nanocrystals, mainly the better dispersed CNCs, improved the interaction between PLA and PHB. Thus, an improvement on the oxygen barrier and stretchability was achieved in PLA-PHB-CNCs-ATBC which also displayed somewhat UV light blocking effect. All bionanocomposite films presented appropriate disintegration in compost suggesting their possible applications as biodegradable packaging materials. (C) 2014 Elsevier Ltd. All rights reserved., Authors wish to acknowledge Spanish Ministry of Science and Innovation (MAT2011-28468-C02-01 and 02), Prof. A. Jimenez and Dr. Nuria Burgos (University of Alicante, Spain) for their assistance in OTR measurements and Gesenu S.p.a. for compost supply. M.P. Arrieta wishes to thank Generalitat Valenciana for Santiago Grisolia Fellowship (2011/007) and Universitat Politecnica de Valencia for the Development Support Programme PAID-00-12 (SP20120120).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Combined effect of poly(hydroxybutyrate) and plasticizers on polylactic acid properties for film intended for food packaging

  • ARRIETA, Marina Patricia
  • JIMENEZ MIGALLON, ALFONSO
  • Samper, María-Dolores|||0000-0002-5102-8412
  • López-Martínez, Juan|||0000-0001-6904-2282
Poly(lactic acid) PLA, and poly(hydroxybutyrate) PHB, blends were processed as films and characterized for their use in food packaging. PLA was blended with PHB to enhance the crystallinity. Therefore, PHB addition strongly increased oxygen barrier while decreased the wettability. Two different environmentally-friendly plasticizers, poly(ethylene glycol) (PEG) and acetyl(tributyl citrate) (ATBC), were added to these blends to increase their processing performance, while improving their ductile properties. ATBC showed higher plasticizer efficiency than PEG directly related to the similarity solubility parameters between ATBC and both biopolymers. Moreover, ATBC was more efficiently retained to the polymer matrix during processing than PEG. PLA PHB ATBC blends were homogeneous and transparent blends that showed promising performance for the preparation of films by a ready industrial process technology for food packaging applications, showing slightly amber color, improved elongation at break, enhanced oxygen barrier and decreased wettability., This work has been supported by the Spanish Ministry of Economy and Competitiveness (MAT2011-28648-C02-01 and MAT2011-28468-C02-02) M.P. Arrieta is Granted by Santiago Grisolia program (GRISOLIA/2011/007). Authors gratefully acknowledge Prof. Arturo Horta Zubiaga from National University of Distance Education (UNED) Spain for his valuable discussion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the Use of PLA-PHB Blends for Sustainable Food Packaging Applications

  • Arrieta, Marina Patricia
  • Aldas-Carrasco, Miguel Fernando
  • Samper, María-Dolores|||0000-0002-5102-8412
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] Poly(lactic acid) (PLA) is the most used biopolymer for food packaging applications. Several strategies have been made to improve PLA properties for extending its applications in the packaging field. Melt blending approaches are gaining considerable interest since they are easy, cost-effective and readily available processing technologies at the industrial level. With a similar melting temperature and high crystallinity, poly(hydroxybutyrate) (PHB) represents a good candidate to blend with PLA. The ability of PHB to act as a nucleating agent for PLA improves its mechanical resistance and barrier performance. With the dual objective to improve PLAPHB processing performance and to obtain stretchable materials, plasticizers are frequently added. Current trends to enhance PLA-PHB miscibility are focused on the development of composite and nanocomposites. PLA-PHB blends are also interesting for the controlled release of active compounds in the development of active packaging systems. This review explains the most relevant processing aspects of PLA-PHB based blends such as the influence of polymers molecular weight, the PLA-PHB composition as well as the thermal stability. It also summarizes the recent developments in PLA-PHB formulations with an emphasis on their performance with interest in the sustainable food packaging field. PLA-PHB blends shows highly promising perspectives for the replacement of traditional petrochemical based polymers currently used for food packaging., This research was performed within the framework of the project MAT2014-59242-C2-1-R supported by the Spanish Ministry of Economy and Competitiveness (MINECO). Marina Patricia Arrieta is a recipient of Juan de la Cierva Post-Doctoral Contract (FJCI-2014-20630) from the MINECO.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multifunctional PLA PHB/cellulose nanocrystal films: Processing, structural and thermal properties

  • ARRIETA, Marina Patricia
  • Fortunati, E.
  • Dominici, F.
  • Kenny, J. M.
  • E. Rayón|||0000-0002-0653-2046
  • López-Martínez, Juan|||0000-0001-6904-2282
Cellulose nanocrystals (CNCs) synthesized from microcrystalline cellulose by acid hydrolysis were added into poly(lactic acid)-poly(hydroxybutyrate) (PLA-PHB) blends to improve the final properties of the multifunctional systems. CNC were also modified with a surfactant (CNCs) to increase the interfacial adhesion in the systems maintaining the thermal stability. Firstly, masterbatch pellets were obtained for each formulation to improve the dispersion of the cellulose structures in the PLA-PHB and then nanocomposite films were processed. The thermal stability as well as the morphological and structural properties of nanocomposites was investigated. While PHB increased the PLA crystallinity due to its nucleation effect, well dispersed CNC and CNCs not only increased the crystallinity but also improved the processability, the thermal stability and the interaction between both polymers especially in the case of the modified CNCs based PLA-PHB formulation. Likewise, CNCs were better dispersed in PLA-CNCs and PLA-PHB-CNCs, than CNC. (C) 2014 Elsevier Ltd. All rights reserved., This research was supported by the Ministry of Science and Innovation of Spain (MAT2011-28468-C02-01 and MAT201128468-0O2-02). M.P. Arrieta thanks Generalitat Valenciana (Spain) for Santiago Grisolia Fellowship (GRISOLIA/2011/007) and Universitat Politecnica de Valencia for the Development Support Programme PAID-00-12 (SP20120120).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Pirólisis de residuos de bioplásticos: productos obtenidos del ácido poliláctico (PLA), Pyrolysis of bioplastics waste: obtained products from poly(lactic acid) (PLA)

  • ARRIETA, Marina Patricia
  • Parres, F.|||0000-0002-1083-9526
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Navarro Vidal, Raúl
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
[EN] Pyrolysis of bioplastics waste may offer an alternative waste treatment option, allowing the recovery of resources. Bioplastics have taken special interest in the industry. They could be an alternative to conventional petroleumbased plastics. Polylactic acid (PLA) is a bioplastic that has gained big interest during the last two decades. Pyrolysis of bioplastics waste may be economically and environmentally attractive. In order to obtain optimal energy recovery with an appropriate composition of emitted products, pyrolysis treatment has to ensure the adequate conditions. In this work, the thermal degradation of PLA was studied by pyrolysis coupled with gas chromatography and mass spectrometry detection. The test conditions allowed to identify and quantify the major compounds produced during thermal degradation of PLA., [ES] El tratamiento de residuos de bioplásticos por pirólisis representa una alternativa que permite la recuperación de recursos. Los bioplásticos han cobrado especial interés en la industria debido a que representan una alternativa a los polímeros convencionales derivados del petróleo. El ácido poliláctico (PLA) es un biopolímero que ha cobrado gran interés en las últimas décadas. La pirólisis de residuos de bioplásticos puede resultar económica y medioambientalmente atractiva. Para ello, debe asegurar una óptima recuperación energética y una adecuada composición de los productos emitidos. En el presente trabajo se ha estudiado la degradación térmica del PLA mediante la técnica de pirolisis acoplada a cromatografía de gases con detección por espectrofotometría de masas (Py-GC/MS). Las condiciones ensayadas permitieron identificar los principales productos generados durante la degradación térmica de muestras de PLA., Los autores agradecen al Ministerio de Educación y Ciencia por el apoyo prestado a través del proyecto MAT2011-28468-C02-02 y al Profesor Alfonso Jiménez del Departamento de Química Analítica Nutrición y Bromatología de la Universidad de Alicante por su colaboración. Marina Patricia Arrieta ha sido becada por la Generalitat Valenciana para una beca para la formación de personal investigador en centros de investigación de la Comunitat Valenciana, dentro del programa Santiago Grisolía (GRISOLIA/2011/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Effect of D-Limonene on the Stabilization of Poly (Lactic Acid)

  • ARRIETA, Marina Patricia
  • Peltzer, Mercedes
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
D-limonene is a monoterpene obtained from a variety of citrus fruit peel oil which is the most important residue in citrus industry. It is food grade and presents antioxidant properties. The use of antioxidants additives in polymers for food packaging is a common practice to reduce their potential thermo-oxidative degradation during processing and they could also prevent the food oxidation reducing the direct addition of antioxidants to the food. Among them, the great interest towards the use of renewable natural resources in the food packaging industry makes natural antioxidants candidates to stabilize biodegradable polymer formulations. In this sense, poly(lactic acid) (PLA) seems to be the most attractive biodegradable polymer for food packaging industry. Thus, the aim of this work was to study the thermal degradation of PLA films stabilized with D-limonene. Kinetic parameters were obtained by thermogravimetric analysis (TGA) in dynamic mode and the apparent activation energies (Ea) were calculated by the Friedman method. The comparison of Ea between PLA stabilized with D-limonene and non-stabilized polymer furnished information on the thermal stabilization performance. The results indicate that D-limonene shows good performance in the PLA stabilization and therefore the possibility of its use as additive intended for food packaging materials., This research was supported by the Ministry of Science and Innovation of Spain (MAT2011-28468-C02-01 and MAT2011-28468-C02-02). Marina Arrieta is granted by Generalitat Valenciana (Spain) with a Santiago Grisolía Fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of slate fiber reinforced high density polyethylene composites for injection molding

  • Carbonell Verdú, Alfredo
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Jorda-Vilaplana, Amparo
  • Samper, María-Dolores|||0000-0002-5102-8412
  • Balart, Rafael|||0000-0001-5670-7126
During the last decade the use of fiber reinforced composite materials has consolidated as an attracting alternative to traditional materials due to an excellent balance between mechanical properties and lightweight. One drawback related to the use of inorganic fibers such as those derived from siliceous materials is the relative low compatibility with conventional organic polymer matrices. Surface treatments with coupling agents and the use of copolymers allow increasing fiber-matrix interactions which has a positive effect on overall properties of composites. In this research work we report the use of slate fiber treated with different coupling agents as reinforcement for high density polyethylene from sugarcane. A silane (propyltrimethoxy silane; PTMS) and a graft copolymer (polyethylene-graft-maleic anhydride; PE-g-MA) were used to improve fiber-matrix interactions on HOPE-slate fiber. The effect of the different compatibilizing systems and slate fiber content were evaluated by scanning electron microscopy (SEM), dynamic thermomechanical analysis (DTMA) as well as mechanical properties (tensile, flexural and impact). The results show that the use of silane coupling agents leads to higher fiber-matrix interactions which has a positive effect on overall mechanical properties. Interesting results are obtained for composites containing 30 wt.% slate fiber previously treated with propyltrimethoxy silane (PTMS) with an increase in tensile and flexural strength of about 16% and 18% respectively. (C) 2014 Elsevier Ltd. All rights reserved., Authors thank "Ministerio de Economia y Competitividad" ref: MAT2011-28468-C02-02 and "Conselleria d'Educacio, Cultura i Esport" - Generalitat Valenciana ref: GV/2014/008 for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

PLA-PHB/cellulose based films: Mechanical, barrier and disintegration properties

  • Arrieta, Marina Patricia
  • Fortunati, E.
  • Dominici, F.
  • Kenny, J. M.
  • E. Rayón|||0000-0002-0653-2046
  • López-Martínez, Juan|||0000-0001-6904-2282
Nanocomposite films based on poly(lactic acid)-poly(hydroxybutyrate) (PLA-PHB) blends and synthesized cellulose nanocrystals (CNC) or surfactant modified cellulose nanocrystals (CNCs), as bio-based reinforcement, were prepared by melt extrusion followed by film forming. The obtained nanocomposites are intended for short-term food packaging. Thus, the mechanical, optical, barrier and wettability properties were studied. Functionalized CNCs contribute to enhance the interfacial adhesion between PLA and PHB, leading to improved mechanical stiffness and increased film stretchability. The synergic effects of the PHB and CNCs on the PLA barrier properties were confirmed by increases in oxygen barrier properties and reductions in surface wettability of the nanocomposites. In addition, the measurements of the viscosity molecular weight for ternary systems showed practically no degradation of PLA and smaller degradation of PHB during processing due to nanocrystal presence. The disintegration process in composting conditions of PLA was delayed by the addition of PHB, while CNC speeded it up. PLA-PHB-CNCs formulations showed enhanced mechanical performance, improved water resistance, reduced oxygen and UV-light transmission, as well as appropriate disintegration in compost suggesting possible applications as packaging materials. (C) 2014 Elsevier Ltd. All rights reserved., This research was supported by the Ministry of Science and Innovation of Spain (MAT2011-28468-C02-01 and MAT2011-28468-C02-02). M.P. Arrieta thanks Generalitat Valenciana (Spain) for Santiago Grisolia Fellowship (GRISOLIA/2011/007) and Universitat Politecnica de Valencia for the Development Support Programme PAID-00-12 (SP20120120). The Authors acknowledge Gesenu S.p.a. for compost supply. Authors gratefully thank Prof. Alfonso Jimenez (University of Alicante, Spain) and Prof. Maria Dolores Salvador Moya (Universitat Politecnica de Valencia) for their assistance with OTR measurements and optical microscope-EDF measurements, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of a novel pyrolysis-gas chromatography/mass spectrometry method for the analysis of poly(lactic acid) thermal degradation products

  • ARRIETA, Marina Patricia
  • Jiménez, Alfonso
  • Parres, F.|||0000-0002-1083-9526
  • López-Martínez, Juan|||0000-0001-6904-2282
Thermal degradation of PLA is a complex process since it comprises many simultaneous reactions. The use of analytical techniques, such as differential scanning calorimetry (DSC) and thermogravimetry (TGA), yields useful information but a more sensitive analytical technique would be necessary to identify and quantify the PLA degradation products. In this work the thermal degradation of PLA at high temperatures was studied by using a pyrolyzer coupled to a gas chromatograph with mass spectrometry detection (Py-GC/MS). Pyrolysis conditions (temperature and time) were optimized in order to obtain an adequate chromatographic separation of the compounds formed during heating. The best resolution of chromatographic peaks was obtained by pyrolyzing the material from room temperature to 600 C during 0.5s. These conditions allowed identifying and quantifying the major compounds produced during the PLA thermal degradation in inert atmosphere. The strategy followed to select these operation parameters was by using sequential pyrolysis based on the adaptation of mathematical models. By application of this strategy it was demonstrated that PLA is degraded at high temperatures by following a non-linear behaviour. The application of logistic and Boltzmann models leads to good fittings to the experimental results, despite the Boltzmann model provided the best approach to calculate the time at which 50% of PLA was degraded. In conclusion, the Boltzmann method can be applied as a tool for simulating the PLA thermal degradation. (C) 2013 Elsevier B.V. All rights reserved., This research was supported by the Ministry of Science and Innovation of Spain (MAT2011-28468-C02-02). Marina P. Arrieta thanks Generalitat Valenciana (Spain) for a Santiago Grisolia Grant (GRISOLIA/2011/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Functional properties of sodium and calcium caseinate antimicrobial active films containing carvacrol

  • ARRIETA, Marina Patricia
  • Peltzer, Mercedes Ana
  • Garrigós Selva, María del Carmen
  • Valente, Artur J. M.
  • JIMENEZ MIGALLON, ALFONSO
  • López-Martínez, Juan|||0000-0001-6904-2282
Active edible films were prepared by adding carvacrol into sodium caseinate (SC) and calcium caseinate (CC) matrices plasticized with two different glycerol concentrations (25 and 35 wt%) prepared by solvent casting. Functional characterisation of these bio-films was carried out by determination of some of their physico-chemical properties, such as colour, transparency, oxygen barrier, wettability, dye permeation properties and antibacterial effectiveness against Gram negative and Gram positive bacteria. All films exhibited good performance in terms of optical properties in the CIELab space showing high transparency. Carvacrol was able to reduce CC oxygen permeability and slightly increased the surface hydrophobicity. Dye diffusion experiments were performed to evaluate permeation properties. The diffusion of dye through films revealed that SC was more permeable than CC. The agar diffusion method was used for the evaluation of the films antimicrobial effectiveness against Escherichia cell and Staphylococcus aureus. Both SC and CC edible films with carvacrol showed inhibitory effects on both bacteria. (C) 2013 Elsevier Ltd. All rights reserved., This research was supported by the Ministry of Science and Innovation of Spain through the projects MAT2011-28468-C02-01, MAT2011-28468-C02-02 and HP2008-0080. M.P. Arrieta thanks Fundacion MAPFRE for "Ignacio Hernando de Larramendi 2009-Medio Ambiente" fellowship (MAPFRE-IHL-01). Authors thank Ferrer Alimentacion S.A., for providing the caseinates powders.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ternary PLA-PHB-Limonene blends intended for biodegradable food packaging applications

  • ARRIETA, Marina Patricia
  • Hernández, Alberto
  • Rayón Encinas, Emilio
  • López-Martínez, Juan|||0000-0001-6904-2282
In this work poly(lactic acid) PLA, and poly(hydroxybutyrate) PHB, were blended and plasticized with a natural terpene d-limonene (LIM) with the dual objective to increase PLA crystallinity and to obtain flexible films intended for food packaging applications. Materials were melt-blended and processed in transparent films. Structural and surfaces properties were evaluated. Moreover, functional properties were studied by means colorimetric parameters, oxygen permeation and water resistant measurements. In addition, thermal stability, crystallization behavior, mechanical as well as nanomechanical properties were investigated. FTIR spectra showed the characteristic bands corresponding to PLA and PHB and their rather molecular interaction. Py-GC/MS showed the characteristics peak of d-limonene as well as the thermal degradation products of PLA and PHB. d-limonene amount after processing was higher in PHB incorporated samples. PHB produced a reinforcing effect in PLA matrix and therefore an improvement in the oxygen barrier properties and the surface water resistance. Moreover, Scanning Confocal Microscopy surface images showed the dispersion of PHB crystal in PLA matrix. The influences of plasticization process on the mechanical properties showed that d-limonene provoked an increase in elongation at break. Disintegrability under composting conditions was also investigated and it was observed that PHB delays the PLA disintegrability under composting while d-limonene speed it up. In brief, the best results regarding structural, thermal, barrier and mechanical properties were found for the ternary PLA PHB LIM film. (C) 2013 Elsevier Ltd. All rights reserved., This work has been supported by the Spanish Ministry of Science and Innovation (MAT2011.-28468-C02-01 and MAT2011-28468-C02-02). M.P. Arrieta is granted by Santiago Grisolia program (GRISOLIA/2011/007). Authors gratefully acknowledge Prof. Alfonso Jimenez (University of Alicante) for his assistance with OTR measurements and Prof. IN,P Dolores Salvador (Polytechnic University of Valencia) for her assistance with nanomechanical and optical microscope analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mechanical characterization of microlaminar structures extracted from cellulosic materials using nanoindentation technique

  • E. Rayón|||0000-0002-0653-2046
  • López-Martínez, Juan|||0000-0001-6904-2282
  • ARRIETA, Marina Patricia
[EN] Nanohardness (H) and elastic modulus (E) properties of several biomass by-products (fruit shells) have been characterized by nanoindentation technique. Two procedures were followed: (i) 3D topographic images for the microstructure characterization and (ii) 2D mechanical mapping for density and mechanical distribution features analysis. Results revealed the typical cellulosic cell wall structures, indicating that the reduced modulus values (E-r) for the cellulosic cells and the amorphous matrix phases were of 6.2 GPa and 4 GPa, respectively, for the apricot shell. The single phases of the rest of structures were tested, showing differences in modulus due to the content of cellulose in the hierarchical structure, and various H and E-r features for each specimen and microstructure analyzed., This work has been supported by the Spanish Ministry of Science and Innovation (MAT2011-28468-C02-02) and the Autonomous Government of Valencia (Spain) through the research program Geronimo Forteza (62/2010, 9 de Junio DOCV no 6291) and Santiago Grisolia fellowship (M. P. Arrieta GRISOLIA/2011/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Disintegrability under composting conditions of plasticized PLA-PHB blends

  • Arrieta, Marina Patricia
  • Jiménez, A.
  • López-Martínez, Juan|||0000-0001-6904-2282
  • E. Rayón|||0000-0002-0653-2046
The disintegration under composting conditions of films based on poly(lactic acid) poly(hydroxybutyrate) (PLA-PHB) blends and intended for food packaging was studied. Two different plasticizers, poly(ethylene glycol) (PEG) and acetyl-tri-n-butyl citrate (ATBC), were used to limit the inherent brittleness of both biopolymers. Neat PLA, plasticized PLA and PLA-PHB films were processed by melt-blending and compression molding and they were further treated under composting conditions in a laboratory-scale test at 58 +/- 2 degrees C. Disintegration levels were evaluated by monitoring their weight loss at different times: 0, 7, 14, 21 and 28 days. Morphological changes in all formulations were followed by optical and scanning electron microscopy (SEM). The influence of plasticizers on the disintegration of PLA and PLA-PHB blends was studied by evaluating their thermal and nanomechanical properties by thermogravimetric analysis (TGA) and the nanoindentation technique, respectively. Meanwhile, structural changes were followed by Fourier transformed infrared spectroscopy (FTIR). The ability of PHB to act as nucleating agent in PLA-PHB blends slowed down the PLA disintegration, while plasticizers speeded it up. The relationship between the mesolactide to lactide forms of PLA was calculated with a Pyrolysis-Gas Chromatography-Mass Spectrometry device (Py-GC/MS), revealing that the mesolactide form increased during composting. (C) 2014 Elsevier Ltd. All rights reserved., Authors thank Spanish Ministry of Economy and Competitiveness by financial support (MAT2011-28468-C02-01 and MAT2011-28468-C02-02). M.P. Arrieta thanks Generalitat Valenciana for Santiago Grisolia Fellowship (2011/007). Authors gratefully acknowledge Prof. M<SUP>a</SUP> Dolores Salvador (Polytechnic University of Valencia) for her assistance with nanomechanical and optical microscope analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Aplicación de modelos matemáticos para el estudio de degradación térmica de polímeros

  • Arrieta, Marina P.
  • López, Juan
  • Ferrándiz, Santiago
  • Parres, Francisco
[EN] The use of mathematical models in the field of education and training is becoming increasingly common. Specifically, in Materials Engineering area, where thermal analysis techniques widely contributes to study the materials thermal decomposition. The application of kinetic methods allows obtaining some parameters that are useful for predicting the behavior of polymers under certain temperature conditions. Polymeric materials are constantly subjected to degradation processes due to its processing, reuse and/or disposal, so that studies associated with thermal degradation of these materials are of particular interest. In this sense, the application of mathematical models for understanding the phenomena of thermal degradation of polymeric materials is useful for undergraduate and research students, MSc. and PhD respectively. Mathematical models can be based on the conversion degree (Friedman, Horowitz and Metzger, Van Krevelen, Coats and Redfern) or, based on the rate of heating measurement (Flynn y Wall). Thermogravimetric analysis (TGA) is an analytical technique which determines the weight loss as a function of temperature or time, allowing to associate specific changes such degradation processes. In this work, we applied different mathematical models to study the thermal degradation of polymeric materials with the main objective that students be able to understand the differences and similarities founded in the materials behavior depending on the mathematical model used., [ES] El empleo de modelos matemáticos en el ámbito de la educación y formación resulta cada vez más frecuente. Concretamente en el área de la Ingeniería de Materiales, donde las técnicas de análisis térmico contribuyen ampliamente al estudio de la descomposición térmica de los materiales, la aplicación de métodos cinéticos permite obtener una serie de parámetros que resultan útiles para la predicción del comportamiento de los polímeros sometidos a ciertas condiciones de temperatura. Los materiales poliméricos están sometidos constantemente a procesos de degradación debido a su procesado, reutilización y/o eliminación, por lo que los estudios asociados a la degradación térmica de éstos materiales cobran especial interés. En este sentido, la aplicación de modelos matemáticos para la comprensión de los fenómenos de degradación térmica de materiales poliméricos resulta muy útil para los estudiantes de segundo y tercer ciclo, Máster y Doctorado respectivamente. Los modelos matemáticos pueden ser basados en el grado de avance (Friedman, Horowitz y Metzger, Van Krevelen, Coats y Redfern) o bien, basados en la medida de la velocidad de calentamiento (Flynn y Wall). El análisis termogravimétrico (TGA) es una técnica analítica que determina la pérdida de peso como función de la temperatura o el tiempo, lo que permite asociar dichos cambios a determinados procesos de degradación. En el presente trabajo, se aplicaron diferentes modelos matemáticos para estudiar la degradación térmica de materiales poliméricos con la finalidad de que los alumnos sean capaces de interpretar las diferencias y similitudes encontradas en el comportamiento de los materiales dependiendo del modelo matemático aplicado., Los autores agradecen al Ministerio de Educación y Ciencia por el apoyo prestado a través del proyecto MAT2011-28468-C02-02. Marina Patricia Arrieta ha sido becada por la Generalitat Valenciana para una beca para la formación de personal investigador en centros de investigación de la Comunitat Valenciana, dentro del programa Santiago Grisolía (GRISOLIA/2011/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of PLA-limonene blends for food packaging applications

  • Arrieta, Marina Patricia
  • Peltzer, Mercedes Ana
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
Polymers derived from renewable resources are now considered as promising alternatives to traditional petro-polymers as they mitigate current environmental concerns (raw renewable materials/biodegradability). D-limonene can be found in a variety of citrus, indeed is the main component of citrus oils and one of most important contributors to citrus flavor. The incorporation of limonene in PLA matrix was evaluated and quantified by Pyrolysis Gas Chromatography Mass Spectrometry (Py-GC/MS). Transparent films were obtained after the addition of the natural compound. Mechanical properties were evaluated by tensile tests. The effect of limonene on mechanical properties of PLA films was characterized by an increase in the elongation at break and a decrease in the elastic modulus. The fracture surface structure of films was evaluated by scanning electron microscopy (SEM), and homogeneous surfaces were observed in all cases. Barrier properties were reduced due to the increase of the chain mobility produced by the D-limonene. (C) 2013 Elsevier Ltd. All rights reserved., This research was supported by the Ministry of Science and Innovation of Spain (MAT2011-28468-C02-02). Marina P. Arrieta thanks Generalitat Valenciana (Spain) for a Santiago Grisolia Fellowship. Authors thank Professor Alfonso Jimenez from the University of Alicante, for his useful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Plasticized poly(lactic acid)-poly(hydroxybutyrate) (PLA-PHB) blends incorporated with catechin intended for active food-packaging applications

  • ARRIETA, Marina Patricia
  • Castro-López, María del Mar
  • Barral-Losada, Luis Fernando
  • López-Vilariño, J.M
  • González-Rodríguez, María Victoria
  • E. Rayón|||0000-0002-0653-2046
  • López-Martínez, Juan|||0000-0001-6904-2282
Active biobased packaging materials based on poly(lactic acid)-poly(hydroxybutyrate) (PLA-PHB) blends were prepared by melt blending and fully characterized. Catechin incorporation, as antioxidant compound, enhanced the thermal stability, whereas its release was improved by the addition of acetyl(tributyl citrate) (ATBC) as plasticizer. Whereas the incorporation of ATBC resulted in a reduction of elastic modulus and hardness, catechin addition produced more rigid materials due to hydrogen-bonding interactions between catechin hydroxyl groups and carbonyl groups of PLA and PHB. The quantification of catechin released into a fatty food simulant and the antioxidant effectiveness after the release process were demonstrated. The effect of the materials' exposure to a food simulant was also investigated. PHB-added materials maintained their structural and mechanical properties after 10 days in a test medium that represents the worst foreseeable conditions of the intended use. Thus, plasticized PLA-PHB blends with catechin show their potential as biobased active packaging for fatty food, This work has been supported by the Spanish Ministry of Economy and Competitiveness (MAT2011-28648-C02-01 and MAT2011-28468-C02-02). M.P.A. is a recipient of a Santiago Grisolia Fellowship (Generalitat Valenciana) (GRISOLIA/2011/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cambios en la estructura cuticular Ornithodoros erraticus hembra durante el proceso de alimentación, Changes in cuticular structure of female Ornithodoros erraticus during the feeding process

  • ARRIETA, Marina Patricia
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • E. Rayón|||0000-0002-0653-2046
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] Ectoparasite acari increases their size several orders of magnitude during feeding. Find out the mechanism through which the young stiff cuticle increases its volume, could be useful to develop novel formulations that would serve to block the growth of these parasites and also as a model for the development of new smart materials. In this work, morphological and chemical studies of the cuticle extracted from female Ornithodoros erraticus were carried out under two states; as a young unfed state and adult fed. SEM Micrographs show that the folds morphology allows stretching the cuticle at all plane axes, revealing that the cuticle is adapted to the parasite's growth during its feeding. On the other hand, chemical composition analysis by pyrolysis coupled to gas chromatography and mass spectrometry showed few changes between acari into unfed state and fed state adult. Indol, the main pyrolysis product of the amino acid tryptophan, could be indicative of the loss of rigidity due it was found mainly in the fasted species than in the fed ones., [ES] Los ácaros ectoparásitos son parásitos que aumentan su tamaño en varios órdenes de magnitud cuando se alimentan y alcanzan su estado adulto. Esclarecer los mecanismos por los cuales una cutícula rígida puede adaptarse a un aumento de volumen importante, cobra importancia para el diseño de fórmulas que bloquen dicho crecimiento y por lo tanto el desarrollo de estos parásitos, y como modelo para el desarrollo de nuevos biomateriales. En este trabajo se realizó una investigación morfológica y química de la cutícula de ácaros Ornithodoros erraticus hembra en estado adulto en ayunas y alimentadas. Mediante imágenes de microscopía electrónica de barrido se muestra que la morfología en forma de pliegues permite un estiramiento de la cutícula en todos los ejes del plano cuticular, lo que indica que la cutícula se adapta al crecimiento del parásito durante su alimentación. Por otro lado, los resultados de un análisis de la composición química mediante pirólisis acoplada a cromatografía de gases y con detección por espectrometría de masas muestran pocas diferencias entre el estado en ayunas y alimentado. La molécula de indol, principal producto de pirólisis del aminoácido triptófano, podría ser indicativo de la pérdida de rigidez debido a que ese encontró mayoritariamente en la especie en ayunas y en mucha menor proporción en la especie alimentada., Los autores desean expresar su agradecimiento a D. Antonio Encinas Grandes por el suministro de Ornithodoros erraticus del área de Salamanca (España) y por su gran aportación a este trabajo mediante la revisión y discusión de los resultados obtenidos. Así mismo, al servicio de microscopía de la Universidad Politécnica de Valencia. MP Arrieta ha sido becada por la Comunitat Valenciana (Grisolía/2011/007). El presente trabajo ha sido fi nanciado por el Ministerio de Educación y Ciencia (MAT2011-28468-C02-02).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microstructure, mechanical, and thermogravimetric characterization of cellulosic by-products obtained from biomass seeds

  • E. Rayón|||0000-0002-0653-2046
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Rico Beneito, María Isabel
  • ARRIETA, Marina Patricia
The microstructural, thermal, and nanomechanical characterization of biomass by-products coming from the food industry were studied. Scanning electron microscopy showed a microstructure formed by polygonal grains. The thermal behavior of seeds, evaluated by thermogravimetric analysis, revealed three main components (hemicellulose, cellulose, and lignin). Walnut shell showed the highest thermal stability and also the highest amount of lignin. The nanomechanical aspects were evaluated by nanoindentation. Samples with higher amount of cellulose presented minor modulus values. In accordance with the thermal stability, the highest modulus and hardness were observed in walnut. These by-products could be useful as reinforcement materials for biodegradable plastic industry., This work has been supported by the Spanish Ministry of Science and Innovation (MAT2011-28468-C02-02) and the Autonomous Government of Valencia (Spain) through the research program Geronimo Forteza (62/2010, 9 de Junio DOCV no 6291). M.P. Arrieta is granted by Santiago Grisolia program (GRISOLIA/2011/007).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Combined Effect of Poly(hydroxybutyrate) and Plasticizers on Polylactic acid Properties for Film Intended for Food Packaging

  • Arrieta, Marina Patricia
  • Samper, María D.
  • López, Juan
  • Jiménez, Alfonso
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
Poly(lactic acid) PLA, and poly(hydroxybutyrate) PHB, blends were processed as films and characterized for their use in food packaging. PLA was blended with PHB to enhance the crystallinity. Therefore, PHB addition strongly increased oxygen barrier while decreased the wettability. Two different environmentally-friendly plasticizers, poly(ethylene glycol) (PEG) and acetyl(tributyl citrate) (ATBC), were added to these blends to increase their processing performance, while improving their ductile properties. ATBC showed higher plasticizer efficiency than PEG directly related to the similarity solubility parameters between ATBC and both biopolymers. Moreover, ATBC was more efficiently retained to the polymer matrix during processing than PEG. PLA–PHB–ATBC blends were homogeneous and transparent blends that showed promising performance for the preparation of films by a ready industrial process technology for food packaging applications, showing slightly amber color, improved elongation at break, enhanced oxygen barrier and decreased wettability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Development of a novel pyrolysis-gas chromatography/mass spectrometry method for the analysis of poly(lactic acid) thermal degradation products

  • Arrieta, Marina Patricia
  • Parres, Francisco
  • López, Juan
  • Jiménez, Alfonso
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
Thermal degradation of PLA is a complex process since it comprises many simultaneous reactions. The use of analytical techniques, such as differential scanning calorimetry (DSC) and thermogravimetry (TGA), yields useful information but a more sensitive analytical technique would be necessary to identify and quantify the PLA degradation products. In this work the thermal degradation of PLA at high temperatures was studied by using a pyrolyzer coupled to a gas chromatograph with mass spectrometry detection (Py-GC/MS). Pyrolysis conditions (temperature and time) were optimized in order to obtain an adequate chromatographic separation of the compounds formed during heating. The best resolution of chromatographic peaks was obtained by pyrolyzing the material from room temperature to 600 °C during 0.5 s. These conditions allowed identifying and quantifying the major compounds produced during the PLA thermal degradation in inert atmosphere. The strategy followed to select these operation parameters was by using sequential pyrolysis based on the adaptation of mathematical models. By application of this strategy it was demonstrated that PLA is degraded at high temperatures by following a non-linear behaviour. The application of logistic and Boltzmann models leads to good fittings to the experimental results, despite the Boltzmann model provided the best approach to calculate the time at which 50% of PLA was degraded. In conclusion, the Boltzmann method can be applied as a tool for simulating the PLA thermal degradation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Disintegrability under composting conditions of plasticized PLA–PHB blends

  • Arrieta, Marina Patricia
  • López, Juan
  • Rayón, Emilio
  • Jiménez, Alfonso
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
The disintegration under composting conditions of films based on poly(lactic acid)–poly(hydroxybutyrate) (PLA–PHB) blends and intended for food packaging was studied. Two different plasticizers, poly(ethylene glycol) (PEG) and acetyl-tri-n-butyl citrate (ATBC), were used to limit the inherent brittleness of both biopolymers. Neat PLA, plasticized PLA and PLA–PHB films were processed by melt-blending and compression molding and they were further treated under composting conditions in a laboratory-scale test at 58 ± 2 °C. Disintegration levels were evaluated by monitoring their weight loss at different times: 0, 7, 14, 21 and 28 days. Morphological changes in all formulations were followed by optical and scanning electron microscopy (SEM). The influence of plasticizers on the disintegration of PLA and PLA–PHB blends was studied by evaluating their thermal and nanomechanical properties by thermogravimetric analysis (TGA) and the nanoindentation technique, respectively. Meanwhile, structural changes were followed by Fourier transformed infrared spectroscopy (FTIR). The ability of PHB to act as nucleating agent in PLA–PHB blends slowed down the PLA disintegration, while plasticizers speeded it up. The relationship between the mesolactide to lactide forms of PLA was calculated with a Pyrolysis–Gas Chromatography–Mass Spectrometry device (Py–GC/MS), revealing that the mesolactide form increased during composting.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Functional properties of sodium and calcium caseinate antimicrobial active films containing carvacrol

  • Arrieta, Marina Patricia
  • Peltzer, Mercedes Ana
  • López, Juan
  • Garrigós, María del Carmen
  • Valente, Artur J.M.
  • Jiménez, Alfonso
  • Garrigós, María del Carmen|||/items/e102a891-6551-4c12-a4f0-f84d26eacd65
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
Active edible films were prepared by adding carvacrol into sodium caseinate (SC) and calcium caseinate (CC) matrices plasticized with two different glycerol concentrations (25 and 35 wt%) prepared by solvent casting. Functional characterisation of these bio-films was carried out by determination of some of their physico-chemical properties, such as colour, transparency, oxygen barrier, wettability, dye permeation properties and antibacterial effectiveness against Gram negative and Gram positive bacteria. All films exhibited good performance in terms of optical properties in the CIELab space showing high transparency. Carvacrol was able to reduce CC oxygen permeability and slightly increased the surface hydrophobicity. Dye diffusion experiments were performed to evaluate permeation properties. The diffusion of dye through films revealed that SC was more permeable than CC. The agar diffusion method was used for the evaluation of the films antimicrobial effectiveness against Escherichia coli and Staphylococcus aureus. Both SC and CC edible films with carvacrol showed inhibitory effects on both bacteria.