Skip to main content

TECNICAS AVANZADAS DE PROCESADO PARA SISTEMAS ACTIVOS ENCAPSULADOS

MAT2014-59242-C2-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 43
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modelos de viscoelasticidad en green composites de PLA y refuerzo de cáscara de avellana con plastificante natural de aceite de linaza, Viscoelastic models in green composites from PLA and hazelnut shell fillers with a natural plasticizer from epoxidized linseed oil

  • Balart, Javier-Francisco|||0009-0006-8621-537X
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Boronat, Teodomiro|||0000-0002-2144-2874
[EN] In a same way to polymeric materials, some composite materials as it is the case of green composites, are characterized by a viscoelastic behaviour which plays a key role in their mechanical properties with time. The use of some engineering materials could be restricted as their mechanical properties could be highly affected by temperature or time. For this reason, this work is focused on the modeling of the viscoelastic behaviour of this biomaterial composite with a biobased polymer matrix from poly(lactic acid) and a lignocellulosic reinforcement/filler coming from hazelnut shell with different plasticizer content. In particular, a biobased plasticizer, namely epoxidized linseed oil (ELO) has been employed. A first approach to the viscoelastic behaviour of these composites is summarized in this work. The Maxwell model considers a series combination of the elastic reponse (represented by a spring) and the viscous contribution (represented by a dashpot). The Kelvin-Voigt model considers the same physical elements (spring and dashpot) but coupled in parallel. As these two basic visceolastic models show important restrictions regarding the real viscoelastic behaviour, this work also considers a series combination of the Maxwell model and the Kelvin-Voigt model, known as Burgers model. This works focuses on determining the different parameters of the Burgers model to fit experimental data from PLAhazelnut shell flour biocomposites with varying plasticizer (ELO) content., [ES] Al igual que los materiales poliméricos, los materiales compuestos conocidos como Green Composites, tienen un componente viscoeléstico que, en función del tiempo, influye sobre el comportamiento mecánico de los mismos. Los materiales utilizados en ingeniería pueden ver afectadas sus propiedades mecánicas por factores como el tiempo y la temperatura, los cuales limitan su puesta en servicio. Por tanto, este trabajo pretende modelizar el comportamiento viscoelástico de este biomaterial compuesto de una matriz polimérica de origen bio, ácido poliláctico (PLA), con un refuerzo de harina de cáscara de avellana y con diferentes contenidos de un plastificante de origen natural, aceite de linaza epoxidado (ELO). Para ello, se lleva a cabo una primera aproximación del comportamiento viscoelástico mediante los modelos simples. El Modelo de Maxwell, contempla la combinación en serie de una componente elástica, representada por un resorte o muelle, y una componente viscosa, representada por un émbolo. El Modelo de Kelvin-Voigt, combina estas mismas componentes, pero en paralelo. Dado que estos dos modelos simples presentan limitaciones y no son fieles al comportamiento real, se modeliza también un modelo combinado de éstos, conocido como Modelo de Burguers, el cual contempla la combinación en serie de un elemento del Modelo de Maxwell con uno del modelo de Kelvin-Voigt. El objetivo del trabajo consta en la determinación de los parámetros que intervienen en cada uno de los modelos de viscoelasticidad para cada uno de los biomateriales en función del contenido de ELO., Esta investigación fue apoyada por el Ministerio de Economía y Competitividad - MINECO, Ref: MAT2014-59242-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Manufacturing and Characterization of Composite Fibreboards with Posidonia oceanica Wastes with an Environmentally-Friendly Binder from Epoxy Resin

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Balart, Rafael|||0000-0001-5670-7126
[EN] Highly environmentally-friendly fibreboards were manufactured by hot-press moulding using Posidonia ocaeanica wastes and a partially biobased epoxy resin as binder. Fibreboards with a constant fibre content of 70 wt % were successfully manufactured by thermo-compression. The effects of a conventional alkali treatment were compared to the synergistic effects that additional silanization with two silanes (amino and glycidyl) can exert on the mechanical and thermo-mechanical properties of fibreboards. The results revealed a remarkable improvement of the mechanical properties with the combination of the alkali treatment followed by the silanization. Scanning electron microscopy also revealed increased resin-fibre interactions due to the synergistic effect of both amino- and glycidyl-silanes. These fibreboards represent a formaldehyde-free solution and can positively contribute to sustainable development as the lignocellulosic component is a waste and the binder resin is partially biobased., This work was supported by the Ministry of Economy and Competitiveness-MINECO [MAT2014-59242-C2-1-R]. D. Garcia-Garcia wants to thank the Spanish Ministry of Education, Culture and Sports for the financial support through a FPU grant number FPU13/06011. L. Quiles-Carrillo acknowledges Generalitat Valenciana-GV for financial support through a FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High toughness poly (lactic acid) (PLA) formulations obtained by ternary blends with poly (3-hydroxybutyrate) (PHB) and flexible polyesters from succinic acid

  • GARCÍA CAMPO, MARÍA JESÚS
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Balart, Rafael|||0000-0001-5670-7126
  • Montanes, Nestor|||0000-0001-6070-127X
[EN] This work reports the development of poly(lactic acid) (PLA) formulations with improved toughness by ternary blends with poly(3-hydroxybutyrate) (PHB) and two different flexible polyesters derived from succinic acid, namely poly(butylene succinate) (PBS) and a copolymer, poly(butylene succinate-co-adipate) (PBSA). The main aim of this work is to increase the low intrinsic toughness of PLA without compromising the thermal properties by manufacturing ternary blends using epoxidized vegetable oils as compatibilizer agents. The ternary blends were manufactured by reactive extrusion in a co-rotating extruder and were subjected to mechanical, thermal, thermos-mechanical and morphology characterization. The obtained results confirm that these two succinic acid-derived polymers, i.e., PBS and PBSA, positively contribute to increase ductile properties in ternary blends with PLA and PHB with a subsequent improvement on impact toughness. In addition, both epoxidized vegetable oils, ELO and ESBO, are responsible for somewhat compatibilization between all three polyesters in blends which gives improved ductile properties with regard to uncompatibilized ternary blends. In addition, the temperature range in which these materials can be used is broader than ternary blends with other flexible polyester such as poly(e-caprolactone), as both PBS and PBSA melt at about 100 °C. These PLA-based materials with improved impact properties offer interesting applications in the packaging industry., This work was supported by the Ministry of Economy and Competitiveness (MINECO) Grant Numbers MAT2014-59242-C2-1-R and MAT2017-84909-C2-2-R. L. Quiles-Carrillo acknowledges Generalitat Valenciana (GV) for financial support through a FPI Grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU Grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reinforcing capability of cellulose nanocrystals obtained from pine cones in a biodegradable poly(3-hydroxybutyrate)/poly(e-caprolactone) (PHB/PCL) thermoplastic blend

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
  • Strömberg, E.
  • Moriana, Rosana
[EN] In this work, different loads (3, 5 and 7 wt%) of pine cone cellulose nanocrystals (CNCs) were added to films of poly(3-hydroxybutyrate)/poly(epsilon-caprolactone) (PHB/PCL) blends with a composition of 75 wt% PHB and 25 wt % PCL (PHB75/PCL25). The films were obtained after solvent casting followed by melt compounding in an extruder and finally subjected to a thermocompression process. The influence of different CNCs loadings on the mechanical, thermal, optical, wettability and disintegration in controlled compost properties of the PHB75/PCL25 blend was discussed. Field emission scanning electron microscopy (FESEM) revealed the best dispersion of CNCs on the polymeric matrix was at a load of 3 wt%. Over this loading, CNCs aggregates were formed enhancing the films fragilization due to stress concentration phenomena. However, the addition of CNCs improved the optical properties of the PHB75/PCL25 films by increasing their transparency and accelerated the film disintegration in controlled soil conditions. In general, the blend with 3 wt% CNCs offers the best balanced properties in terms of mechanical, thermal, optical and wettability., This research was supported by the Ministry of Economy and Competitiveness MINECO through the gran number MAT2014-59242-C2-1-R. D. Garcia-Garcia wants to thank the Spanish Ministry of Education, Culture and Sports for the financial support through a FPU grant number FPU13/06011.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the Use of PLA-PHB Blends for Sustainable Food Packaging Applications

  • Arrieta, Marina Patricia
  • Aldas-Carrasco, Miguel Fernando
  • Samper, María-Dolores|||0000-0002-5102-8412
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] Poly(lactic acid) (PLA) is the most used biopolymer for food packaging applications. Several strategies have been made to improve PLA properties for extending its applications in the packaging field. Melt blending approaches are gaining considerable interest since they are easy, cost-effective and readily available processing technologies at the industrial level. With a similar melting temperature and high crystallinity, poly(hydroxybutyrate) (PHB) represents a good candidate to blend with PLA. The ability of PHB to act as a nucleating agent for PLA improves its mechanical resistance and barrier performance. With the dual objective to improve PLAPHB processing performance and to obtain stretchable materials, plasticizers are frequently added. Current trends to enhance PLA-PHB miscibility are focused on the development of composite and nanocomposites. PLA-PHB blends are also interesting for the controlled release of active compounds in the development of active packaging systems. This review explains the most relevant processing aspects of PLA-PHB based blends such as the influence of polymers molecular weight, the PLA-PHB composition as well as the thermal stability. It also summarizes the recent developments in PLA-PHB formulations with an emphasis on their performance with interest in the sustainable food packaging field. PLA-PHB blends shows highly promising perspectives for the replacement of traditional petrochemical based polymers currently used for food packaging., This research was performed within the framework of the project MAT2014-59242-C2-1-R supported by the Spanish Ministry of Economy and Competitiveness (MINECO). Marina Patricia Arrieta is a recipient of Juan de la Cierva Post-Doctoral Contract (FJCI-2014-20630) from the MINECO.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Environmentally Friendly Compatibilizers from Soybean Oil for Ternary Blends of Poly(lactic acid)-PLA, Poly(e-caprolactone)-PCL and Poly(3-hydroxybutyrate)-PHB

  • GARCÍA CAMPO, MARÍA JESÚS
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Masiá Vañó, Jaime
  • Reig-Pérez, Miguel Jorge|||0000-0003-0226-1194
  • Montanes, Nestor|||0000-0001-6070-127X
  • Balart, Rafael|||0000-0001-5670-7126
[EN] Ternary blends of poly(lactic acid) (PLA), poly(3-hydroxybutyrate) (PHB) and poly(e-caprolactone) (PCL) with a constant weight percentage of 60%, 10% and 30% respectively were compatibilized with soybean oil derivatives epoxidized soybean oil (ESO), maleinized soybean oil (MSO) and acrylated epoxidized soybean oil (AESO). The potential compatibilization effects of the soybean oil- derivatives was characterized in terms of mechanical, thermal and thermomechanical properties. The effects on morphology were studied by field emission scanning electron microscopy (FESEM). All three soybean oil-based compatibilizers led to a noticeable increase in toughness with a remarkable improvement in elongation at break. On the other hand, both the tensile modulus and strength decreased, but in a lower extent to a typical plasticization effect. Although phase separation occurred, all three soybean oil derivatives led somewhat to compatibilization through reaction between terminal hydroxyl groups in all three biopolyesters (PLA, PHB and PCL) and the readily reactive groups in the soybean oil derivatives, that is, epoxy, maleic anhydride and acrylic/epoxy functionalities. In particular, the addition of 5 parts per hundred parts of the blend (phr) of ESO gave the maximum elongation at break while the same amount of MSO and AESO gave the maximum toughness, measured through Charpy¿s impact tests. In general, the herein-developed materials widen the potential of ternary PLA formulations by a cost effective blending method with PHB and PCL and compatibilization with vegetable oil-based additives., This work was supported by the Ministry of Economy and Competitiveness (MINECO) grant number MAT2014-59242-C2-1-R. L. Quiles-Carrillo acknowledges Generalitat Valenciana (GV) for financial support through a FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Disintegration in compost conditions and water uptake of green composites from poly(lactic acid) and hazelnut shell flour

  • Balart, Javier-Francisco|||0009-0006-8621-537X
  • Montanes, Nestor|||0000-0001-6070-127X
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
[EN] Green composites of poly(lactic acid)-PLA and hazelnut shell flour (HSF) with and without epoxidized linseed oil (ELO) as plasticizer/compatibilizer were subjected to different aging conditions such as water uptake by immersion and disintegration in compost soil. The effect of the hydrolytic degradation was analyzed by measuring the weight gain as a function of the immersion time in water and calculating the corresponding diffusion coefficients. As expected, the water diffusion coefficient increases with HSF content while no remarkable change is obtained for plasticized compositions with ELO. Differential scanning calorimetry reveals a noticeable increase in crystallinity after the degradation process by water immersion. Degradation in controlled compost soil was followed thorough measurements of weight changes. In general, the weight change for a particular degradation time is lower as the HSF content increases. In addition, presence of ELO as plasticizer/compatibilizer delays the degradation process in compost soil. Scanning electron microscopy highlighted a noticeable deterioration of aged samples after 2 weeks with multiple crack formation and high surface abrasion due to microbial activity after 4 weeks., This research was supported by the Ministry of Economy and Competitiveness - MINECO, Ref: MAT2014-59242-C2-1-R. Authors also thank to "Conselleria d'Educacio, Cultura i Esport" - Generalitat Valenciana, Ref: GV/2014/008 for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Antimicrobial activity of metal cation-exchanged zeolites and their evaluation on injection-molded pieces of bio-based high-density polyethylene

  • Torres-Giner, S.
  • Torres, Ana
  • Ferrándiz, Marcela
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Balart, Rafael|||0000-0001-5670-7126
[EN] In this study, three different natural types of unmodified zeolite (chabazite, mordenite, and faujasite) were initially characterized for their morphology, elemental composition, and antimicrobial activity against foodborne bacteria and fungi. The chabazite-type zeolite was selected due to its optimal morphology and lowest silicon to aluminum ratio (Si/Al). This was then solution exchanged with different combinations of silver (Ag+), copper (Cu2+), and zinc (Zn2+) ions to prepare single, binary, and ternary metal cation-modified zeolites. Antimicrobial results clearly indicated that Ag-based zeolites exhibited more antimicrobial activity than Cu- and Zn-based zeolites. Interestingly, the multi-ionic zeolite, that is, the ternary Ag-Cu-Zn-zeolite, was the most efficient antimicrobial sample in terms of the amount of added silver. In the last step, the obtained multi-ionic zeolite was, for the first time, incorporated at different weight amounts (1, 5, 10, and 15 wt%) into a bio-based high-density polyethylene (bio-HDPE) matrix by extrusion and shaped into pieces by injection molding. Novel sustainable polymer composite pieces with improved stiffness and hardness and high antimicrobial activity were obtained. These treated materials offer industrial relevance to control the growth of harmful microorganisms in hygiene applications related to the food industry., Spanish Ministry of Economy and Competitiveness, Grant/Award Number: Project MAT2014-59242-C2-1-R; Conselleria d'Educacio, Cultura i Esport - Generalitat Valenciana, Grant/Award Number: GV/2014/008
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development and optimization of renewable vinyl plastisol/wood flour composites exposed to ultraviolet radiation

  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Montanes, Nestor|||0000-0001-6070-127X
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia Sanoguera, D.
The application of vegetable oils as novel plasticizers for poly(vinyl chloride) (PVC) is currently in the spotlight of the polymer industry due to their ingrained sustainability. In this study, novel vinyl plastisol/wood flour composites based on epoxidized linseed oil (ELO) were evaluated. For this, PVC was first plasticized by 70 parts by weight of ELO per hundred parts of resin (phr) to form a vinyl plastisol. Wood flour, obtained by dry grinding from reed (Phragmite communis), was then incorporated at five different loadings (10, 15, 20, 25, and 30 wt-%) and three particle sizes (100, 250, and 500 pm). The effect of ultraviolet (UV) radiation was explored to activate the surface of wood flour to increase its interfacial adhesion with the vinyl plastisol. Stereomicroscopy and scanning electron microscopy (SEM) were used to examine the composites fracture and determine the dispersion of wood flour in the vinyl matrix. As per the surface appearance and mechanical results, optimal materials were observed for vinyl plastisol composites at high contents of wood flour with the largest particles that were previously exposed to UV for 4 min. Resultant renewable vinyl plastisol composites show a great deal of potential as designed materials for wood replacement in building applications. (C) 2016 Elsevier Ltd. All rights reserved., This research was supported by the Spanish Ministry of Economy and Competitiveness (Project MAT2014-59242-C2-1-R). The authors also thank "Conselleria d'Educacio, Cultura i Esport - Generalitat Valenciana" (grant number GV/2014/008) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Processing and characterization of binary poly(hydroxybutyrate) (PHB) and poly(caprolactone) (PCL) blends with improved impact properties

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Ferri, J.M|||0000-0002-1269-4973
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Balart, Rafael|||0000-0001-5670-7126
[EN] The present work is focused on the development of binary blends from poly(hydroxybutyrate) (PHB) and poly(caprolactone) (PCL). Miscibility, mechanical and thermal properties as well as blends morphology are evaluated in terms of the blend composition. Binary PHB PCL blends were manufactured by melt compounding in a twin screw co-rotating extruder and injection molded. The composition of PHB PCL covered the full range between individual polymers at 25 wt% increments. The obtained results show that PCL acts as an impact modifier, thus leading to an increase in flexibility and ductility as the PCL content in the PHB PCL blends increases with a noticeable increase in elongation at break and on the energy absorption in impact conditions. The tensile strength and the elastic modulus decrease with increasing PCL content in the PHB PCL blends; nevertheless, the flexural strength and the flexural modulus reach the highest values for the PHB PCL blends containing 25 wt% PCL, with a remarkable decrease over this composition. The analysis of fractured surfaces by field emission scanning electron microscopy and thermal properties obtained by differential scanning calorimetry (DSC) and TGA give clear evidences of the immiscibility of these two biodegradable polymers. Additionally, DSC results showed an increase in crystallinity of both PHB and PCL with regard to individual polymers for PHB PCL blends containing 25 wt% PCL. Furthermore, an increase in the degradation onset (T0) of about 30 C higher was detected for the same blends. Dynamic mechanical thermal analysis showed slightly shifted glass transition temperatures of each individual polymer, thus indicating that although both PHB and PCL are not fully miscible, some interactions between them occur., This research was supported by the Ministry of Economy and Competitiveness-MINECO, Ref: MAT2014-59242-C2-1-R. The authors also thank the "Conselleria d'Educacio, Cultura i Esport"-Generalitat Valenciana, Ref: GV/2014/008 for financial support. D. Garcia-Garcia thanks the Spanish Ministry of Education, Culture and Sports for their financial support through an FPU Grant (FPU13/06011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of different compatibilizers on injection-molded green composite pieces based on polylactide filled with almond shell flour

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Carbonell-Verdu, A.
[EN] Green composites made of polylactide (PLA) filled with almond shell flour (ASF) at a constant weight content of 25¿wt.-% were manufactured by injection molding. In order to increase the interfacial adhesion between the biopolymer and the lignocellulosic fillers, three different compatibilizers were tested, namely multi-functional epoxy-based styrene-acrylic oligomer (ESAO), aromatic carbodiimide (AC), and maleinized linseed oil (MLO). The effect of each compatibilizer on the thermal, mechanical, and thermomechanical properties and water uptake of the injection-molded PLA/ASF pieces was analyzed. The obtained results indicated that all the here-studied compatibilizers had a positive influence on both the thermal stability and the mechanical and thermomechanical performance of the green composite pieces but low impact on their water uptake profile. In addition, the morphological analysis performed at the fracture surfaces of the green composite pieces revealed that the filler¿matrix gap was substantially reduced. Among the tested compatibilizers, ESAO and MLO yielded the highest performance in terms of mechanical strength and ductility, respectively. In the case of MLO, it also offers the advantage of being a plant-derived additive so that its application in green composites positively contributes to the development of sustainable polymer technologies., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) program number MAT2014-59242-C2-1-R and AGL2015-63855-C2-1-R and Generalitat Valenciana (GV) program number GV/2014/008. A. Carbonell-Verdu wants to thank Universitat Politecnica de Valencia (UPV) for his FPI grant. D. Garcia-Garcia wants to thank the Spanish Ministry of Education, Culture and Sports (MECD) for his FPU grant (FPU13/06011). L. Quiles-Carrillo also wants to thank GV for his FPI grant (ACT/2016/182) and the MECD for his FPU grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of miscibility on mechanical and thermal properties of poly(lactic acid)/polycaprolactone blends

  • Ferri, J.M|||0000-0002-1269-4973
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Jorda-Vilaplana, Amparo
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Balart, Rafael|||0000-0001-5670-7126
Binary blends based on poly(lactic acid) (PLA) and polycaprolactone (PCL) were prepared by melt mixing in a twin-screw co-rotating extruder in order to increase the low intrinsic elongation at break of PLA for packaging applications. Although PLA and PCL show low miscibility, the presence of PCL leads to a marked improvement in the ductile properties of PLA. Various mechanical properties were evaluated in terms of PCL content up to 30wt% PCL. In addition to tensile and flexural properties, Poisson s ratio was obtained using biaxial extensometry to evaluate transversal deformations when axial loads are applied. Very slight changes in the melt temperature and glass transition temperature of PLA are observed thus indicating the low miscibility of the PLA PCL system. Field emission scanning electron microscopy reveals some interactions between the two components of the blend since the morphology is characterized by non-spherical polycaprolactone drops dispersed into the PLA matrix. In addition to the improvement of mechanical ductile properties, PCL provides higher degradation rates of blends under conditions of composting for contents below 22.5% PCL., This research was supported by the Ministry of Economy and Competitiveness - MINECO, ref. MAT2014-59242-C2-1-R. The authors also thank the Conselleria d'Educacio, Cultura i Esport - Generalitat Valenciana, ref. GV/2014/008 for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Processing and Characterization of Environmentally Friendly Composites from Biobased Polyethylene and Natural Fillers from Thyme Herbs

  • Montanes, Nestor|||0000-0001-6070-127X
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Segui Llinares, Vicente Jesús|||0000-0002-4043-2866
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Boronat, Teodomiro|||0000-0002-2144-2874
[EN] The main aim of this research work is to assess the potential of a distillery waste from thyme as multifunctional filler in natural fiber reinforced plastics (NFRP) with biobased polyethylene matrix. Several ethylene-based copolymers with different co-monomers (vinyl alcohol, methyl methacrylate, glycidyl methacrylate and acrylic acid) were used as compatibilizer agents to overcome the lack of compatibility between the highly hydrophobic matrix and the highly hydrophilic lignocellulosic filler. The effect of the compatibilizer type and amount, as well as the lignocellulosic filler content was followed by thermal, mechanical, morphological and rheological characterizations. In addition to the typical filler effect, thyme also provides a remarkable increase in thermal stability at moderate temperatures with a positive effect on widening the processing window. The compatibilizer agent that offers best balanced properties is the glycidyl methacrylate copolymer with a noticeable increase in stiffness, flexural and tensile strength. Regarding processability, the viscosity increases with the filler content. This is highly important at low shear rates but the effect is almost negligible at high shear rates typical of injection molding processes., This research was supported by the Ministry of Economy and Competitiveness-MINECO through the grant number MAT2014-59242-C2-1-R. Authors also wish to thank "Licores Sinc, S.A." for kindly supplying the Thymus moroderi wastes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Manufacturing and characterization of poly(lactic acid) composites with hydroxyapatite

  • Ferri, J.M|||0000-0002-1269-4973
  • Montanes, Nestor|||0000-0001-6070-127X
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Balart, Rafael|||0000-0001-5670-7126
  • Jordà Sempere, José Jorge
[EN] Hydroxyapatite (HA), a naturally occurring calcium orthophosphate, possesses the most similar chemical composition to human bone. In this research work, composite materials were prepared using poly(lactic acid) (PLA) as a polymer matrix and HA as an osteoconductive filler for potential use in medical applications. Composites with varying HA content comprised in the 10¿30 wt% range were obtained by extrusion-compounding followed by injection molding. The effect of the HA loading on overall properties was assessed by mechanical characterization using tensile, flexural, impact, and hardness standard tests. Main thermal transitions of PLA-HA composites were obtained by differential scanning calorimetry (DSC) and degradation/decomposition at high temperatures was followed by thermogravimetric analysis. Dynamical behavior was assessed by dynamic mechanical thermal analysis and the dimensional stability was studied by thermomechanical analysis (TMA). As per the results, PLA-HA composites with 20¿30 wt% HA offer the best-balanced properties with a remarkable increase in the Young¿s modulus. The glass transition temperature remained almost constant with slight changes of less than 1C as measured by both DSC and TMA. TMA also revealed a remarkable decrease in the coefficient of linear thermal expansion. The overall results confirm the usefulness of these materials from a mechanical point of view for biomedical applications as they are characterized by high stiffness, tensile strength, and dimensional stability., The authors want to acknowledge the Ministry of Economy and Competitiveness (MINECO) for their financial support through the grant number MAT2014-59242- C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of selectively etched halloysite nanotubes by acid treatment

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Ferri, J.M|||0000-0002-1269-4973
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Balart, Rafael|||0000-0001-5670-7126
  • Ripoll, L.
  • Hidalgo, M.
[EN] Halloysite nanotubes (HNTs) are a type of naturally occurring inorganic nanotubes that are characterized by a different composition between their external and internal walls. The internal walls are mainly composed of alumina whilst external walls are composed of silica. This particular structure offers a dual surface chemistry that allows different selective surface treatments which can be focused on increasing the lumen, increasing porosity, etc. In this work, HNTs were chemically treated with different acids (sulphuric, acetic and acrylic acid), for 72 h at a constant temperature of 50 °C. As per the obtained results, the treatment with sulphuric acid is highly aggressive and the particular shape of HNTs is almost lost, with a remarkable increase in porosity. The BET surface area increases from 52.9 (untreated HNTs) up to 132.4 m2 g−1 with sulphuric acid treatment, thus showing an interesting potential in the field of catalysis. On the other hand, the treatment with acetic acid led to milder effects with a noticeable increase in the lumen diameter that changed from 13.8 nm (untreated HNTs) up to 18.4 nm which the subsequent increase in the loading capacity by 77.8%. The aluminium content was measured by X-ray fluorescence (XRF) and laser induced breakdown spectroscopy (LIBS). The final results using two systems, suggest a good correlation between the acid strength and the aluminium reduction. Consequently, is possible to conclude that new applications for HNTs can be derived from selective etching with acids. Sulphuric acid widens the potential of HNTs in the field of catalysis while weak acids such as acetic and acrylic acids give a controlled and homogeneous lumen increase with the corresponding increase in the loading capacity., This work was supported by the Ministry of Economy and Competitiveness - MINECO [MAT2014-59242-C2-1-R]. D. Garcia-Garcia wants to thanks the Spanish Ministry of Education, Culture and Sports for their financial support through an FPU grant [FPU13/06011].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Melt grafting of sepiolite nanoclay onto poly(3-hydroxybutyrate-co-4-hydroxybutyrate) by reactive extrusion with multi-functional epoxy-based styrene-acrylic oligomer

  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Montanes, Nestor|||0000-0001-6070-127X
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
[EN] This paper deals with grafting of sepiolite nanoclay onto poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-co-4HB)) biopolymer by melt compounding. Reactive extrusion was performed in a twin-screw extruder in the presence of an epoxy-based styrene-acrylic oligomer (ESAO). The chemical interaction of sepiolite with P(3HB-co-4HB) were investigated using Fourier transform infrared (FTIR) spectroscopy. A novel grafting mechanism was proposed based on the multiple epoxy groups present in the reactive coupling agent. Epoxy ring-opening generated, on the one hand, the formation of alkoxy silanes bonds with the silanol groups exposed on the external surface of pristine sepiolite. On the other hand, ester bonds were produced with the terminal acid groups of the biopolymer chains. The newly formed sepiolite-grafted P(3HB-co-4HB) (sepiolite-g-P(3HB-co-4HB)) nanocomposite showed higher thermal, thermomechanical, and mechanical performance than the equivalent ungrafted nanocomposite. Melt grafting of sepiolite at different weight contents (1, 3, and 5 wt.-%) interestingly increased the thermal stability and stiffness of P(3HB-co-4HB) without impairing its ductility and toughness., The Spanish Ministry of Economy and Competitiveness is acknowledged for funding support through the research project MAT2014-59242-C2-1-R and the Torres Quevedo program of Dr. Torres-Giner (PTQ-11-04733). Quiles-Carrillo also thanks "Generalitat Valenciana" for his FPI grant (ACIF/2016/182). The authors thank Pr. Chris Sammon from Sheffield Hallam University for his support during FTIR characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Plasticization effect of epoxidized cottonseed oil (ECSO) on poly(lactic acid)

  • Carbonell-Verdu, A.
  • Samper, María-Dolores|||0000-0002-5102-8412
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Balart, Rafael|||0000-0001-5670-7126
[EN] In this work, the use of an environmentally friendly plasticizer derived epoxidized cottonseed oil (ECSO) for poly(lactic acid) (PLA) is proposed. Melt extrusion was used to plasticize PLA formulations with different ECSO contents in the 0 - 10 wt.%. PLA formulation with 10 wt.% shows a remarkable increase in mechanical ductile properties with a percentage increase in elongation at break of more than 1100% and a noticeable increase in the impact absorbed energy. Differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) revealed a clear decrease in the glass transition temperature of neat PLA as the ECSO content increased. Field emission scanning electron microscopy (FESEM) of fractured surfaces from impact tests showed an improvement of ductility with typical rough and porous topographies. Migration tests in n-hexane at different temperatures revealed very low migration properties thus leading to new interesting plasticizers for improved PLA industrial formulations., This research was supported by the Spanish Ministry of Economy and Competitiveness - MINECO, Ref: MAT2014-59242-C2-1-R. Authors also thank to "Conselleria d'Educacio, Cultura i Esport" - Generalitat Valenciana, Ref: GV/2014/008 for financial support. A. Carbonell-Verdu wants to thank Universitat Politecnica de Valencia for financial support through an FPI grant. D. Garcia-Garcia wants to thanks the Spanish Ministry of Education, Culture and Sports for their financial support through an FPU grant (FPU13/06011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A new biobased plasticizer for poly(vinyl chloride) based on epoxidized cottonseed oil

  • Carbonell Verdú, Alfredo
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Jorda-Vilaplana, Amparo
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Balart, Rafael|||0000-0001-5670-7126
[EN] The use of epoxidized cottonseed oil (ECSO) as plasticizer for poly(vinyl chloride), PVC was studied. The plasticizer content was set to 70 phr and the optimum isothermal curing conditions were studied in the temperature range comprised between 160 ºC and 220 ºC with varying curing times in the 7.5 - 17.5 min range. The influence of the curing conditions on overall performance of cured plastisols was followed by the evolution of mechanical properties (tensile tests with measurements of tensile strength, elongation at break and modulus), change in colour, surface changes of fractured samples by scanning electron microscopy (SEM), thermal transitions by differential scanning calorimetry (DSC) and migration in n-hexane. The optimum mechanical features of cured plastisols are obtained for curing temperatures in the 190-220 ºC range. For these curing conditions, fractography analysis by SEM gives evidences of full curing process as no PVC particles and free plasticizer can be found., R. Balart wants to thank the Ministry of Economy and Competitiveness - MINECO (Ref: MAT2014-59242-C2-1-R) for funding support. L. Sanchez-Nacher wants to thank the "Conselleria d'Educacio, Cultura i Esport - Generalitat Valenciana" (reference number: GV/2014/008). A. Carbonell-Verdu wants to thank the Polytechnic University of Valencia for their financial support through an FPI grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development and characterization of environmentally friendly composites from poly(butylene succinate) (PBS) and almond shell flour with different compatibilizers

  • Liminana, P.
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
  • Montanes, Nestor|||0000-0001-6070-127X
[EN] This work reports the enhancement of the properties of poly (butylene succinate) (PBS) composites containing 30 wt% almond shell flour (ASF) by using different compatibilizer families: epoxy, maleic anhydride and acrylic. With regard to the epoxy compatibilizers, epoxidized linseed oil (ELO) and epoxidized soybean oil (ESBO) were used. Two maleic anhydride-derived compatibilizers, namely, maleinized linseed oil (MLO) and dodecenyl succinic anhydride (DDSA) were used. Finally, two acrylic monomers, namely methyl methacrylate (MMA) and acrylic acid (AA) were employed. Uncompatibilized and compatibilized PBS/ASF composites were characterized in terms of their mechanical properties, morphology, thermal behaviour and thermomechanical performance. The obtained results suggest that all three vegetable oil-derived compatibilizers (ELO, ESBO and MLO) give a remarkable increase in ductile properties while poor compatibilization is obtained with the acrylic monomers. These vegetable-oil derived compatibilizers could represents an interesting environmentally friendly solution to compatibilizing polyester-type polymers and their composites with lignocellulosic materials., This work was supported by the Ministry of Economy and Competitiveness (MINECO) grant numbers MAT2014-59242-C2-1-R and MAT2017-84909-C2-2-R. L. Quiles-Carrillo acknowledges Generalitat Valenciana (GV) for financial support through a FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development and characterization of green composites from bio-based polyethylene and peanut shell

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Jorda-Vilaplana, Amparo
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Carbonell Verdú, Alfredo
[EN] In the present work, different compatibilizers, namely polyethylene-graft-maleic anhydride (PE-g-MA), polypropylene-graftmaleic anhydride (PP-g-MA), and polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene-graft-maleic anhydride (SEBS-g-MA) were used on green composites derived from biobased polyethylene and peanut shell (PNS) flour to improve particle polymer interaction. Composites of high-density polyethylene/peanut shell powder (HDPE/PNS) with 10 wt % PNS flour were compatibilized with 3 wt % of the abovementioned compatibilizers. As per the results, PP-g-MA copolymer lead to best optimized properties as evidenced by mechanical characterization. In addition, best particle matrix interface interactions with PP-g-MA were observed by scanning electron microscopy (SEM). Subsequently HDPE/PNS composites with varying PNS flour content in the 5 30 wt % range with PP-g-MA compatibilizer were obtained by melt extrusion and compounding followed by injection molding and were characterized by mechanical, thermal, and morphological techniques. The results showed that PNS powder, leads to an increase in mechanical resistant properties (mainly, flexural modulus, and strength) while a decrease in mechanical ductile properties, that is, elongation at break and impact absorbed energy is observed with increasing PNS flour content. Furthermore, PNS flour provides an increase in thermal stability due to the natural antioxidant properties of PNS. In particular, composites containing 30 wt % PNS powder present a flexural strength 24% and a flexural modulus 72% higher than the unfilled polyethylene and the thermo-oxidative onset degradation temperature is increased from 232 8C up to 2548C thus indicating a marked thermal stabilization effect. Resultant composites can show a great deal of potential as base materials for wood plastic composites., This research was supported by the Ministry of Economy and Competitiveness -MINECO, Ref: MAT2014-59242-C2-1-R. Authors also thank to "Conselleria d'Educacio, Cultura i Esport" - Generalitat Valenciana, Ref: GV/2014/008 for financial support. A. Carbonell-Verdu wants to thank Universitat Politecnica de Valencia for financial support through an FPI grant. D. Garcia-Garcia wants to thanks the Spanish Ministry of Education, Culture and Sports for the financial support through an FPU grant (FPU13/06011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Plasticization effects of epoxidized vegetable oils on mechanical properties of poly(3-hydroxybutyrate)

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Ferri, J.M|||0000-0002-1269-4973
  • Montanes, Nestor|||0000-0001-6070-127X
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Balart, Rafael|||0000-0001-5670-7126
The effect of various epoxidized vegetable oils as potential plasticizers for poly(3-hydroxybutyrate) (PHB) was evaluated in terms of changes in mechanical and thermal properties and morphology. PHB is a biodegradable aliphatic polyester obtained from bacterial fermentation. High stiffness and fragility are two of its main drawbacks. To overcome this behaviour, PHB was plasticized with various amounts of two different epoxidized vegetable oils: epoxidized linseed oil (ELO) and epoxidized soybean oil (ESBO). The total ELO and ESBO content varied in the range 5 phr (per hundred resin) to 20 phr and plasticized PHB materials were obtained by melt extrusion and compounding followed by injection moulding. The results show that the plasticizing effect provided by ELO is more efficient than that by ESBO with balanced properties at a concentration of 10 phr ELO. ELO addition leads to an improvement in mechanical ductile properties with a noticeable increase in elongation at break and impact absorbed energy. With regard to thermal properties, the addition of both ELO and ESBO leads to a marked increase in thermal stability of PHB. All these findings suggest that addition of 10 phr ELO leads to optimized PHB formulations with potential uses in technical applications. (c) 2016 Society of Chemical Industry, This research was supported by the Ministry of Economy and Competitiveness-MINECO, Ref. MAT2014-59242-C2-1-R. The authors also thank the Conselleria d'Educacio, Cultura i Esport -Generalitat Valenciana, Ref. GV/2014/008, for financial support. DG-G thanks the Spanish Ministry of Education, Culture and Sports for financial support through an FPU grant (FPU13/06011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Compatibilization of highly sustainable polylactide/almond shell flour composites by reactive extrusion with maleinized linseed oil

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Sammon, C.
[EN] Highly sustainable composites were produced by melt compounding polylactide (PLA) with almond shell flour (ASF), a processed by-product of the food industry, at a constant weight content of 30 wt.-%. However, due to the lack of miscibility between PLA and ASF, both being raw materials obtained from crops, resultant green composite presented poor ductility and low thermal stability. To overcome this limitation, maleinized linseed oil (MLO), a multi-functionalized plant-derived additive, was originally incorporated as a reactive compatibilizer during the extrusion process. Both chemical and physical characterizations showed that 1¿5 parts per hundred resin (phr) of MLO successfully serve to obtain PLA/ASF composites with improved mechanical, thermal, and thermomechanical properties. The enhancement achieved was particularly related to a dual compatibilizing effect of plasticization in combination with melt grafting. The latter process was specifically ascribed to the formation of new carboxylic ester bonds through the reaction of the multiple maleic anhydride functionalities present in MLO with the hydroxyl groups of both the PLA terminal chains and cellulose on the ASF surface. The fully bio-based and biodegradable composites described herein give an efficient sustainable solution to upgrade agro-food wastes as well as contributing to reducing the cost of PLA-based materials., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) project numbers MAT2014-59242-C2-1-R and AGL2015-63855-C2-1-R and Generalitat Valenciana (GV) project number GV/2014/008. L. Quiles-Carrillo wants to thank GV for financial support through a FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Preparation and characterization of compression-molded green composite sheets made of poly(3-hydroxybutyrate) reinforced with long pita fibers

  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Montanes, Nestor|||0000-0001-6070-127X
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
[EN] Novel green composites were successfully prepared from bacterial poly(3-hydroxybutyrate) (PHB) and pita fibers derived from the agave plant (Agave americana). Various weight contents (10, 20, 30, and 40 wt.-%) of pita fibers at different lengths (5, 15, and 20 mm) were successfully incorporated into PHB by compression molding. The newly prepared PHB/pita fibers composite sheets were characterized in terms of their mechanical and thermomechanical properties and then related to their morphology after fracture. Attained results indicated that the mechanical stiffness of PHB significantly improved with both the content and length of pita fibers, although ductile properties were reduced. In particular, the elastic modulus of the 40 wt.-% PHB composite sheets containing 20-mm-long pita fibers was approximately 55% higher than the unfilled PHB sheet. Shore D hardness also improved, achieving the shortest pita fibers the highest improvement. Pita fibers with lengths of 15 and 20 mm also increased the Vicat softening point and heat deflection temperature (HDT) by 38 and 21°C, respectively. Due to their optimal shape, it is concluded that pita fibers with lengths above 15 mm can potentially reinforce and improve the performance of PHB biopolymer. In addition, the compression-molding methodology described in this research work represents a cost-effective pathway to feasibly prepare long-fiber- reinforced thermoplastics (LFRTs) fully based on renewable raw materials. Resultant green composite sheets can be of interest for the development of sustainable parts in the automotive industry and other advanced applications in polymer technology., This research was supported by the Spanish Ministry of Economy and Competitiveness (project MAT2014-59242- C2-1-R). The authors also thank “Conselleria d’Educació, Cultura i Esport—Generalitat Valenciana” (grant number GV/2014/008) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of the engineering performance of different bio-based aliphatic homopolyamide tubes prepared by profile extrusion

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In the present study, three different commercial bio-based polyamides (bio-PAs), namely polyamide 610 (PA610), polyamide 1010 (PA1010), and polyamide 1012 (PA1012), were processed by profile extrusion with an annular die. These aliphatic homopolyamides, also known as "green nylons", are industrially produced by polycondensation reaction of diamines and dicarboxylic acids that are partially or fully obtained from naturally occurring castor oil. The profile-extruded bio-PA tubes were characterized and compared in terms of their thermal, thermomechanical, and mechanical properties and also water uptake. Resultant comparative evaluation indicated that both the methylene-to-amide (CH2/CONH) ratio and the crystallinity degree of the bio-PAs played the main role in determining the performance of the tubes. Due to significant differences in their CH2/CONH ratio, the PA610 tubes showed the highest thermal properties while the tubes made of PA1012 presented the highest flexibility and lowest water uptake. Interestingly, the fully bio-based PA1010 tubes offered the most balanced and enhanced engineering performance, which was ascribed to the high crystallinity achieved during profile extrusion. The here-developed bio-PA tubes can fulfil demanding technical requirements and these also certainly represent a sustainable answer to the rising demand for new high-performance biopolymers for engineering applications. (C) 2017 Elsevier Ltd. All rights reserved., This research was supported by the Ministry of Economy and Competitiveness program number MAT2014-59242-C2-1-R and AG12015-63855-C2-1-R and Generalitat Valenciana (GV) program number GV/2014/008. Quiles-Carrillo wants to thank GV for financial support through a FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The effect of maleinized linseed oil as biobased plasticizer in poly (lactic acid)-based formulations

  • Ferri, J.M|||0000-0002-1269-4973
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Montanes, Nestor|||0000-0001-6070-127X
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Balart, Rafael|||0000-0001-5670-7126
[EN] The use of maleinized linseed oil (MLO) as a potential biobased plasticizer for poly(lactic acid) (PLA) industrial formulations with improved toughness was evaluated. MLO content varied in the range 0-20 phr (parts by weight of MLO per hundred parts by weight of PLA). Mechanical, thermal and morphological characterizations were used to assess the potential of MLO as an environmentally friendly plasticizer for PLA formulations. Dynamic mechanical thermal analysis and differential scanning calorimetry revealed anoticeable decrease in the glass transition temperature of about 6.5 degrees C compared to neat PLA. In addition, the cold crystallization process was favoured with MLO content due to the increased chain mobility that the plasticizer provides. PLA toughness was markedly improved in formulations with 5 phr MLO, while maximum elongation at break was obtained for PLA formulations plasticized with MLO content in the range 15-20 phr. Scanning electron microscopy revealed evidence of plastic deformation. Nevertheless, phase separation was detected in plasticized PLA formulations with high MLO content (above 15-20 phr MLO), which had a negative effect on overall toughness. (C) 2017 Society of Chemical Industry, This research was funded by the Ministry of Economy and Competitiveness - MINECO, ref. MAT2014-59242-C2-1-R. The authors also thank Conselleria d'Educacio, Cultura i Esport - Generalitat Valenciana, ref. GV/2014/008, for financial support. DG-G thanks the Spanish Ministry of Education, Culture and Sports for financial support through an FPU grant (FPU13/06011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improvement of the compatibility between poly(3-hydroxybutyrate) and poly(e-caprolactone) by reactive extrusion with dicumyl peroxide

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • E. Rayón|||0000-0002-0653-2046
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Balart, Rafael|||0000-0001-5670-7126
  • Carbonell Verdú, Alfredo
[EN] Poly(3-hydroxybutyrate) is a biodegradable aliphatic polyester obtained through bacterial fermentation that has gained attention in the last few years; nevertheless, its industrial applications are restricted because of some drawbacks related to its high stiffness and fragility which is associated to its high crystallinity. In this work, poly(3-hydroxybutyrate) (P3HB) was melt blended with poly(e-caprolactone) (PCL) at a constant weight ratio of 75/25 (P3HB/PCL) by reactive extrusion with different contents of dicumyl peroxide (DCP) in the 0 1 wt% range. The effects of the DCP load on mechanical, thermal and morphology of the P3HB/PCL blend were studied. Results showed a positive increase in the elongation at break and the impact-absorbed energy of 91% and 231% respectively with regard the uncompatibilized P3HB/PCL blend by the addition of 1 wt% DCP, being this a clear evidenced of the improved compatibility between these polymers. Moreover, morphology of DCP-compatibilized P3HB/PCL blend obtained by field emission electron microscopy (FESEM) and atomic force microscopy (AFM) showed a remarkable decrease in the particle size of poly(e-caprolactone)-rich domains randomly dispersed in the poly(3-hydroxybutyrate). In addition, both FESEM and AFM also revealed improved interfacial adhesion between P3HB- and PCL-rich phases with a noticeable decrease in the gap between them. Addition of 1 wt% DCP also contributes to lowering the degree of crystallinity of PHB by 14% in the blend and other thermal properties are not highly affected by the reactive extrusion with DCP. ©2016 Elsevier Ltd. All rights reserved., This research was supported by the Ministry of Economy and Competitiveness MINECO through the grant number MAT2014-59242-C2-1-R. D. Garcia-Garcia wants to thank the Spanish Ministry of Education, Culture and Sports for the financial support through a FPU grant number FPU13/06011. A. Carbonell-Verdu acknowledges Universitat Politecnica de Valencia for financial support through an FPI grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Plasticizing effect of biobased epoxidized fatty acid esters on mechanical and thermal properties of poly(lactic acid)

  • Ferri, J.M|||0000-0002-1269-4973
  • Samper, María-Dolores|||0000-0002-5102-8412
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Reig-Pérez, Miguel Jorge|||0000-0003-0226-1194
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Balart, Rafael|||0000-0001-5670-7126
Poly(lactic acid), PLA, is a polyester that can be produced from lactic acid derived from renewable resources. This polymer offers attracting uses in packaging industry due to its biodegradability and high tensile strength. However, PLA is quite brittle, which limits its applications. To overcome this drawback, PLA was plasticized with epoxy-type plasticizer derived from a fatty acid, octyl epoxy stearate (OES) at different loadings (1, 3, 5, 10, 15, and 20 phr). The addition of OES decreases the glass transition temperature and provides a remarkable increase in elongation at break and impact-absorbed energy. Plasticizer saturation occurs at relatively low concentrations of about 5 phr OES; higher concentration leads to phase separation as observed by field emission scanning electron microscopy (FESEM). Optimum balanced mechanical properties are obtained at relatively low concentrations of OES (5 phr), thus indicating the usefulness of this material as environmentally friendly plasticizer for PLA industrial formulations., This research was supported by the Ministry of Economy and Competitiveness-MINECO, Ref: MAT2014-59242-C2-1-R. Authors also thank to "Conselleria d'Educacio, Cultura i Esport"-Generalitat Valenciana, Ref: GV/2014/008 for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Processing and characterization of high environmental efficiency composites based on PLA and hazelnut shell flour (HSF) with biobased plasticizers derived from epoxidized linseed oil (ELO)

  • Balart, Javier-Francisco|||0009-0006-8621-537X
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
[EN] Different amounts of epoxidized linseed oil (ELO) have been added to poly(lactic acid)-PLA composites with hazelnut shell flour (HSF) to provide a plasticizing effect and improve the low intrinsic ductile properties of PLA/HSF composites. Mechanical, thermal, thermo-mechanical and dynamic mechanical properties have been studied in terms of the weight percentage ELO. Mechanical resistant properties in both tensile and flexural tests decrease with wt.% ELO while a remarkable increase with wt.% ELO is obtained. These results reveal a clear plasticization effect of ELO but, in addition, internal structure of PLA/HSF/ELO composites shows good PLA-HSF (matrix-particle) interactions so that indicating that ELO also provides a coupling effect between PLA matrix and HSF filler. ELO addition leads to a decrease in storage modulus (G ) obtained by dynamic mechanical thermal analysis (DMTA) in torsion mode thus giving clear evidence of the plasticization effect of ELO. Overall, the use of ELO in PLA/HSF composites is an attracting way to improve the low intrinsic fragility of these green composites; furthermore, ELO provides an improvement on thermal stability and a coupling effect between the polymer matrix and the surrounding lignocellulosic filler., This research was supported by the Ministry of Economy and Competitiveness - MINECO, Grant Number: MAT2014-59242-C2-1-R. Authors also thank to "Conselleria d'Educacio, Cultura i Esport" - Generalitat Valenciana, Grant Number: GV/2014/008 for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Manufacturing and properties of biobased thermoplastic composites from poly(lactid acid) and hazelnut shell wastes

  • Balart, Javier-Francisco|||0009-0006-8621-537X
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Balart, Rafael|||0000-0001-5670-7126
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
[EN] Poly(lactic acid), PLA-based green composites were obtained with hazelnut shell flour (HSF) derived from the food industry thus leading to fully biodegradable materials with attracting properties. The hazelnut shell flour content varied in the 10-40wt% range. An increase in the degree of crystallinity with increasing HSF was detected, mainly due to the nucleating effect of lignocellulosic particles. The thermodimensional stability was noticeably improved with increasing HSF amount as evidenced by a remarkable decrease in the coefficient of thermal-linear expansion. Increasing HSF leads to stiffer materials as HSF particles act as interlock points that restrict polymer chain motion. Addition of hazelnut shell flour as filler in PLA-based green composites leads to fully biodegradable composites with balanced mechanical and thermal properties. Furthermore, it gives a solution to upgrade wastes from the hazelnut industry and contributes to lower the cost of PLA-based materials. POLYM. COMPOS., 39:848-857, 2018. (c) 2016 Society of Plastics Engineers, Contract grant sponsor: Ministerio de Economia y Competitividad-MINECO; contract grant number: MAT2014-59242-C2-1-R; contract grant sponsor: Conselleria d'Educacio, Cultura i Esport; contract grant number: GV/2014/008.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reactive toughening of injection-molded polylactide pieces using maleinized hemp seed oil

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Balart, Rafael|||0000-0001-5670-7126
  • Blanes-Martínez, M.M.
[EN] The present study describes the effect of maleinized hemp seed oil (MHO) on the physical performance of polylactide (PLA) pieces. To this end, PLA pieces with varying MHO contents in the 0¿10 wt% range were manufactured by twin-screw extrusion (TSE) followed by injection molding. The resultant pieces were characterized in terms of their mechanical, thermal, and thermomechanical properties. The obtained properties suggested that, unlike typical plasticizers, MHO does not only induce an increment in elongation at break and impact resistance but it also enhances both elastic modulus and tensile strength. In addition, a moderate decrease in the glass transition temperature (Tg) was observed. This was ascribed to simultaneous linear chain-extension, branching, and/or cross-linking phenomena due to the reaction of the multiple maleic anhydride (MAH) groups present in MHO with the terminal hydroxyl groups of the PLA chains. Furthermore, morphology characterization revealed that, though certain phase separation occurred at its highest content, MHO was finely dispersed as submicron droplets within the PLA matrix contributing to improving toughness. The use of multi-functionalized reactive vegetable oils thus represents a highly sustainable solution to reduce the intrinsic brittleness of PLA materials without compromising their mechanical resistance and the toughened biopolymer pieces described herein can find interesting applications in, for instance, rigid packaging., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) (projects MAT2014-59242-C2-1-R and AGL2015-63855-C2-1-R.). L. Quiles-Carrillo acknowledges Generalitat Valenciana (GV) for financial support through a FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Manufacturing and Characterization of Toughened Poly(lactic acid) (PLA) Formulations by Ternary Blends with Biopolyesters

  • GARCÍA CAMPO, MARÍA JESÚS
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
  • Montanes, Nestor|||0000-0001-6070-127X
[EN] Ternary blends with a constant poly(lactic acid) (PLA) content (60 wt %) and varying amounts of poly(3-hydroxybutyrate) (PHB) and poly(¿-caprolactone) (PCL) were manufactured by one step melt blending process followed by injection moulding, with the main aim of improving the low intrinsic toughness of PLA. Mechanical properties were obtained from tensile and Charpy impact tests. The miscibility and morphology of the system was studied by thermal analysis and field emission scanning electron microscopy (FESEM). The obtained results showed a clear phase separation, thus indicating poor miscibility between these three biopolyesters, i.e., PLA, the continuous component with dispersed PHB and PCL domains in the form of different sphere size. Nevertheless, the high fragility of PLA was remarkably reduced, as detected by the Charpy impact test. In accordance with the decrease in brittleness, a remarkable increase in elongation at break is achieved, with increasing PCL load due to its flexibility; in addition, increasing PCL load provides thermal stability at high temperatures. Thus, tailored materials can be manufactured by melt blending PLA, PHB, and PCL in different percentages to offer a wide range of biodegradable polymer blends., This work was supported by the Ministry of Economy and Competitiveness (MINECO) grant number MAT2014-59242-C2-1-R. L. Quiles-Carrillo acknowledges Generalitat Valenciana (GV) for financial support through a FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancement of the mechanical and thermal properties of injection-molded polylactide parts by the addition of acrylated epoxidized soybean oil

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Balart, Rafael|||0000-0001-5670-7126
  • Duart, S.
[EN] Thiswork reports the effect of acrylated epoxidized soybean oil (AESO) addition on the mechanical, thermal, and thermomechanical properties of polylactide (PLA) parts obtained by injection molding. To this end, AESO, a chemically multi-functionalized vegetable oil, was incorporated into PLA during melt processing. The PLA parts with AESO contents in the 2.5¿7.5 wt% range showed a remarkable enhancement in both elongation at break and impact-absorbed energy while their tensile and flexural strength as well as thermomechanical properties were maintained or slightly improved. Additionally, the AESO-containing PLA parts presented higher thermal stability and lower crystallinity. The improvement achievedwas ascribed to a dual effect of plasticization in combination with a chain-extension and/or cross-linking process of the PLA chains by the highly reactive acrylate and epoxy groups present in AESO. The use of AESO thus represents an environmentally friendly solution to obtain toughened PLA materials of high interest in, for instance, rigid packaging, automotive or building and construction applications., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) [grant numbers MAT2014-59242-C2-1-R & AGL2015-63855-C2-1-R]. L. Quiles-Carrillo thanks the Spanish Ministry of Education, Culture, and Sports (MECD) for financial support through the FPU program [grant number FPU15/03812].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancing the mechanical features of clay surfaces by the absorption of nano-SiO2 particles in aqueous media. Case of study on Bronze Age clay objects

  • E. Rayón|||0000-0002-0653-2046
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Arrieta, Marina Patricia
  • Pasies -Oviedo, Trinidad
[EN] Nanoparticles are known to be able to enhance the performance of low dense materials, achieving the small intergranular spaces to further interact with the matrix. In this work, a consolidation treatment of an ancient clay material is reported. It is based on the use of silica nanoparticles dispersed in an aqueous medium as a more sustainable approach than those currently used in the conservation field. The effective consolidation has been determined by ensuring an appropriate mechanical surface resistance using the nanoindentation technique as non-destructive measurements. Moreover, the ability of SiO(2 )nanoparticles to fill the microstructure is studied by scanning electron microscopy. As a case report, several low-strength clay fragments dated from the Bronze Age were surface treated with a commercial aqueous suspension of SiO2 nanoparticles that were analyzed by transmission electron microscopy (TEM) displaying dimensions of about 20 nm in diameter. Field Emission Electron Microscopy (FESEM) revealed that nanoparticles filled the inter-granular spaces of the clay, leading to a nanostructured material. The nanoindentation results showed an increase in surface resistance against scratching. Meanwhile, the nanohardness and elastic modulus increased 10 times (from 15 to 150 MPa) and 8 times (from 1 to 8 GPa), respectively due to the nano-SiO2 treatment, confirming the consolidation effect of the nanoparticles., Authors acknowledge the financial support of Spanish Ministry of Economy and Competitiveness, MAT2014-59242-C2-1-R. Authors also acknowledge the support of Helena Bonet, Director of the Prehistory Museum of Valencia and Ma Jesus de Pedro, conservator of this Museum, and to the Photographic Archive Department. M.P. Arrieta wishes to thank the financial support of MINECO for a Juan de la Cierva (FJCI-2014-20630) contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

PLA films with improved flexibility properties by using maleinized cottonseed oil

  • Carbonell-Verdu, A.
  • Dominici, F.
  • Torre, L.
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Balart, Rafael|||0000-0001-5670-7126
[EN] This work assesses the potential of maleinized cottonseed oil MCSO as plasticizer in poly(lactic acid) PLA films with improved ductile behaviour. The effects of MCSO are compared with commercially available maleinized oil, i.e. maleinized linseed oil MLO in terms of mechanical, thermal and barrier properties, as well as morphology changes. Plasticized PLA formulations were obtained with a maleinized oil content in the 0 10 wt% range. Addition of both maleinized vegetable oils leads to a slight decrease in the glass transition temperature (Tg) of neat PLA from 63 °C to 60 61 °C. Nevertheless, MCSO provides better overall properties. Addition of 7.5 wt% MCSO increases the elongation at break by 292%. Regarding the barrier properties, both maleinized vegetable oils increase the oxygen transmission rate OTR. Nevertheless, this increase is less pronounced in the case of MCSO thus indicating its higher efficiency compared to MLO. On the other hand, addition of both maleinized vegetable oils do not compromise the overall disintegration of the obtained PLA formulations, thus positioning these additives as environmentally friendly solutions to increase ductile properties in PLA-based films., This research was supported by the Ministry of Economy and Competitiveness - MINECO, Ref: MAT2014-59242-C2-1-R. Carbonell-Verdu wants to thank Universitat Politecnica de Valencia for financial support through an FPI grant. Garcia-Garcia wants to thanks the Spanish Ministry of Education, Culture and Sports for their financial support through an FPU grant (FPU13/06011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improvement of mechanical ductile properties of poly(3-hydroxybutyrate) by using vegetable oil derivatives

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Fombuena, Vicent|||0000-0001-7266-6205
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Balart, Rafael|||0000-0001-5670-7126
Poly(3-hydroxybutyrate), P3HB is a thermoplastic polyester synthesized from bacterial fermentation with potential uses in packaging due to its biodegradability. Nevertheless, P3HB is a fragile material and its processing temperature window is very narrow which restricts its use. This study explores the potential of vegetable oil-derived plasticizers, i.e., maleinized linseed oil (MLO) and an epoxidized fatty acid ester (EFAE) in the 5 20 phr range as environmentally friendly solutions for P3HB industrial formulations with improved toughness. The results show that optimum balance between ductile properties is achieved with low plasticizer content (5 phr) for both plasticizer types. Elongation at break and the impact resistance are increased by 28 and 71% respectively after addition of 5 phr MLO. With regard to EFAE, the elongation at break is improved by 40% and the impact resistance is increased to twice the value of P3HB. Another effect that both plasticizers provide is the thermal stabilization with a delay in the onset degradation temperature., Authors thank Ministry of Economy and Competitiveness-MINECO, Ref: MAT2014-59242-C2-1-R for financial support. Authors also thank "Conselleria d'Educacio, Cultura i Esport"-Generalitat Valenciana, Ref: GV/2014/008 for financial support. D. Garcia-Garcia thanks the Spanish Ministry of Education, Culture and Sports for the financial support through an FPU grant (FPU13/06011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Poly(lactic acid) formulations with improved toughness by physical blending with thermoplastic starch

  • Ferri, J.M|||0000-0002-1269-4973
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Balart, Rafael|||0000-0001-5670-7126
  • Carbonell-Verdu, A.
[EN] This work focuses on poly(lactic acid) (PLA) formulations with improved toughness by physical blending with thermoplastic maize starch (TPS) plasticized with aliphatic¿aromatic copolyester up to 30 wt %. A noticeable increase in toughness is observed, due to the finely dispersed spherical TPS domains in the PLA matrix. It is worth to note the remarkable increase in the elongation at break that changes from 7% (neat PLA) up to 21.5% for PLA with 30 wt % TPS. The impact-absorbed energy is markedly improved from the relatively low values of neat PLA (1.6 J/m2) up to more than three times. Although TPS is less thermally stable than PLA due to its plasticizer content, in general, PLA/TPS blends offer good balanced thermal stability. The morphology reveals high immiscibility in PLA/TPS blends, with TPS-rich domains with an average size of 1 micrometre, finely dispersed which, in turn, is responsible for the improved toughness., Authors thank the Ministry of Economy and Competitiveness (MINECO), Ref.: MAT2014–59242-C2-1-R for their support. Authors also thank “Conselleria d’Educacio, Cultura i Esport”- Generalitat Valenciana, Ref.: GV/2014/008 for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The effect of maleinized linseed oil (MLO) on mechanical performance of poly(lactic acid)-thermoplastic starch (PLA-TPS) blends

  • Ferri, J.M|||0000-0002-1269-4973
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Balart, Rafael|||0000-0001-5670-7126
[EN] In this work, poly(lactic acid), PLA and thermoplastic starch, TPS blends (with a fixed content of 30 wt.% TPS) were prepared by melt extrusion process to increase the low ductile properties of PLA. The TPS used contains an aliphatic/aromatic biodegradable polyester (AAPE) that provides good resistance to aging and moisture. This blend provides slightly improved ductile properties with an increase in elongation at break of 21.5% but phase separation is observed due to the lack of strong interactions between the two polymers. Small amounts of maleinized linseed oil (MLO) can positively contribute to improve the ductile properties of these blends by a combined plasticizing-compatibilizing effect. The elongation at break increases over 160% with the only addition of 6 phr MLO. One of the evidence of the plasticizing-compatibilizing effect provided by MLO is the change in the glass transition temperature (Tg) with a decrease of about 10 °C. Field emission scanning electron microscopy (FESEM) of PLA-TPS blends with varying amounts of maleinized linseed oil also suggests an increase in compatibility., This research was supported by the Ministry of Economy and Competitiveness-MINECO, Ref: MAT2014-59242-C2-1-R. Authors also thank to "Conselleria d'Educacio, Cultura i Esport"-Generalitat Valenciana, Ref: GV/2014/008 for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the use of acrylated epoxidized soybean oil as a reactive compatibilizer in injection-molded compostable pieces consisting of polylactide filled with orange peel flour

  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Lagaron, Jose Maria
[EN] In the present study, novel green composites made of polylactide (PLA) and orange peel flour (OPF) were melt compounded by twin¿screw extrusion (TSE) and shaped into pieces by injection molding. Orange peel, a large by¿product of the juice industry, was first grounded to flour and then incorporated as a lignocellulosic filler into the biopolymer at 10, 20, and 30 wt.¿%. Since both components of the green composite presented low compatibility, the resultant injection¿molded pieces showed poor ductility and impaired thermomechanical performance. As a new bio¿based reactive compatibilizer, acrylated epoxidized soybean oil (AESO) was added at 5 parts per hundred resin (phr) to the PLA/OPF formulations during the extrusion process. The addition of AESO increased the filler¿biopolymer adhesion and led to compostable green composite pieces with improved physical properties. The enhancement achieved was related to a dual effect of plasticization and melt grafting of the OPF particles onto the PLA chains provided by the multiple acrylate and epoxy groups present in AESO. The use of multi¿functionalized vegetable oils to improve the performance of green composites certainly opens up new opportunities for the expansion of fully bio¿based and biodegradable materials that are partially obtained from agro¿food waste., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) program numbers MAT2014-59242-C2-1-R and AGL2015-63855-C2-1-R. LQ-C also thanks the Spanish Ministry of Education, Culture, and Sports (MECD) for financial support through FPU grant number FPU15/03812.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effects of Lignocellulosic Fillers from Waste Thyme on Melt Flow Behavior and Processability of Wood Plastic Composites (WPC) with Biobased Poly(ethylene) by Injection Molding

  • Montanes, Nestor|||0000-0001-6070-127X
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Boronat, Teodomiro|||0000-0002-2144-2874
[EN] Wood-like plastic composites were manufactured with a thermoplastic matrix polymer from renewable resources, i.e. high-density poly(ethylene) from bioethanol and a lignocellulosic filler obtained as a byproduct of the industrial distillation of thyme. The potential manufacturing of these composites by injection molding was studied. For this purpose, an in depth study of the effects of the lignocellulosic loading (comprised between 10 and 50 wt%) on the rheological properties of these composites was carried out by using capillary rheometry and model fitting with the Cross-WLF rheological model. In addition, a side by side comparison of the experimental results and those obtained by simulations with MoldFlow® was provided. In addition, the values of the pressure in the cavity and in the sprue were measured and collected by two selectively mounted pressure sensors and the results were compared with those predicted by MoldFlow® with the inputs provided by the Cross-WLF fitting model. The results showed a remarkable increase in viscosity with increasing lignocellulosic filler content, which has a negative effect on overall processability. This phenomenon specifically intense at low shear rates. However, this phenomenon could be potentially minimized using high shear rates because of the shear thinning effect of pseudoplastic fluids. Both the experimental and simulated results suggest the need of higher pressures to fill the cavity with these WPC, specifically for those with high filler content of up to 50 wt%. The results of the study indicate that melt viscosity is highly linked to the cavity pressure which is the dominant factor determining the quality of the final product in plastic injection molding., This research was supported by the Ministry of Economy and Competitiveness – MINECO through the grant number MAT2014-59242-C2-1-R. Authors also wish to thank “Licores Sinc, S.A.” for kindly supplying the thyme wastes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Nuevos materiales biobasados con matriz de ácido poliláctico y refuerzo de cáscara de avellana

  • Balart, Javier-Francisco|||0009-0006-8621-537X
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Carbonell Verdú, Alfredo
El objetivo principal de este trabajo es la obtención de Wood Plastic Composites (WPC) biobasados con matriz de ácido poliláctico (PLA) y refuerzo de cáscara de avellana. Se han realizado cuatro formulaciones con distintos porcentajes en peso tanto de ácido poliláctico como de cáscara de avellana. Los diferentes compuestos han sido caracterizados mecánicamente mediante un test de impacto y otro de dureza. Las fracturas obtenidas han sido observadas mediante microscopia electrónica de barrido (SEM). El análisis de los resultados indica una falta de interacción entre la matriz de PLA y la partícula de cáscara de avellana., Esta investigación fue apoyada por el Ministerio de Economía y Competitividad - MINECO, Ref: MAT2014-59242-C2-1-R. Los autores también agradecen a la "Conselleria d'Educació, Cultura i Esport" - Generalitat Valenciana, Ref: GV/2014/008 el apoyo financiero.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimizing the yield and physico-chemical properties of pine cone cellulose nanocrystals by different hydrolysis time

  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Ek, Monica
  • Moriana, Rosana
[EN] Cellulose nanocrystals (CNCs) were isolated for the first time from pine cones (PC) by alkali and bleaching treatments and subsequent sulfuric acid hydrolysis (64 %) at 45 ºC. The influence of the hydrolytic reaction time (30, 45 and 90 min) on the yield, chemical composition and structure, and thermal stability of CNCs was evaluated. The removal of non-cellulosic constituents during the alkaline and bleaching treatment resulted in high pure cellulosic fibres. The isolation of CNCs from these cellulosic fibres at different reaction times was verified by the nano-dimensions of the individual crystals (< 3 and <335 nm of average diameter and length, respectively). The highest yield (15%) and the optimum CNCs properties in terms of aspect ratio, thermal stability and crystallinity were obtained for an extraction time of 45 min. PC appeared to be a new promising source of cellulose fibres and CNCs with potential to be applied as reinforcement in composites and for food-packaging., This work was supported by the Ministry of Economy and Competitiveness (MINECO) [MAT2014-59242-C2-1-R]. D. García-García wants to thanks the Spanish Ministry of Education, Culture and Sports for their financial support through an FPU Grant [FPU13/06011].
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Characterization of selectively etched halloysite nanotubes by acid treatment

  • Garcia-Garcia, Daniel
  • Ferri, Jose M.
  • Ripoll-Seguer, Laura
  • Hidalgo, Montserrat
  • Lopez-Martinez, Juan
  • Balart, Rafael
  • Hidalgo, Montserrat|||/items/8c122b2d-4d92-45f3-ad75-e863e4e18750
Halloysite nanotubes (HNTs) are a type of naturally occurring inorganic nanotubes that are characterized by a different composition between their external and internal walls. The internal walls are mainly composed of alumina whilst external walls are composed of silica. This particular structure offers a dual surface chemistry that allows different selective surface treatments which can be focused on increasing the lumen, increasing porosity, etc. In this work, HNTs were chemically treated with different acids (sulphuric, acetic and acrylic acid), for 72 h at a constant temperature of 50 °C. As per the obtained results, the treatment with sulphuric acid is highly aggressive and the particular shape of HNTs is almost lost, with a remarkable increase in porosity. The BET surface area increases from 52.9 (untreated HNTs) up to 132.4 m2 g−1 with sulphuric acid treatment, thus showing an interesting potential in the field of catalysis. On the other hand, the treatment with acetic acid led to milder effects with a noticeable increase in the lumen diameter that changed from 13.8 nm (untreated HNTs) up to 18.4 nm which the subsequent increase in the loading capacity by 77.8%. The aluminium content was measured by X-ray fluorescence (XRF) and laser induced breakdown spectroscopy (LIBS). The final results using two systems, suggest a good correlation between the acid strength and the aluminium reduction. Consequently, is possible to conclude that new applications for HNTs can be derived from selective etching with acids. Sulphuric acid widens the potential of HNTs in the field of catalysis while weak acids such as acetic and acrylic acids give a controlled and homogeneous lumen increase with the corresponding increase in the loading capacity.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhancing the mechanical features of clay surfaces by the absorption of nano-SiO2 particles in aqueous media. Case of study on Bronze Age clay objects

  • Rayón, E.
  • Arrieta, Marina P.
  • Pasíes, T.
  • López, J.
  • Jordá, J. L.
Nanoparticles are known to be able to enhance the performance of low dense materials, achieving the small intergranular spaces to further interact with the matrix. In this work, a consolidation treatment of an ancient clay material is reported. It is based on the use of silica nanoparticles dispersed in an aqueous medium as a more sustainable approach than those currently used in the conservation field. The effective consolidation has been determined by ensuring an appropriate mechanical surface resistance using the nanoindentation technique as non-destructive measurements. Moreover, the ability of SiO nanoparticles to fill the microstructure is studied by scanning electron microscopy. As a case report, several low-strength clay fragments dated from the Bronze Age were surface treated with a commercial aqueous suspension of SiO nanoparticles that were analyzed by transmission electron microscopy (TEM) displaying dimensions of about 20 nm in diameter. Field Emission Electron Microscopy (FESEM) revealed that nanoparticles filled the inter-granular spaces of the clay, leading to a nanostructured material. The nanoindentation results showed an increase in surface resistance against scratching. Meanwhile, the nanohardness and elastic modulus increased 10 times (from 15 to 150 MPa) and 8 times (from 1 to 8 GPa), respectively due to the nanoSiO treatment, confirming the consolidation effect of the nanoparticles., Authors acknowledge the financial support of Spanish Ministry of Economy and Competitiveness, MAT2014-59242-C2-1-R. Authors also acknowledge the support of Helena Bonet, Director of the Prehistory Museum of Valencia and Ma Jesús de Pedro, conservator of this Museum, and to the Photographic Archive Department. M.P. Arrieta wishes to thank the financial support of MINECO for a Juan de la Cierva (FJCI-2014-20630) contract., Peer Reviewed