Skip to main content

MODELADO AVANZADO Y CARACTERIZACION DE NUEVOS COMPONENTES DE ALTA FRECUENCIA EN GUIA DE ONDA Y TECNOLOGIA PLANAR PARA LAS APLICACIONES ESPACIALES EMERGENTES

PID2019-103982RB-C43

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Increasing Peak Power Handling in Microstrip Bandpass Filters by Using Rounded-End Resonators

  • Morales-Hernández, Aitor
  • Sánchez-Soriano, Miguel Á.
  • Marini, Stephan
  • Guglielmi, Marco
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This work describes a new strategy for improving the peak power handling capability (PPHC) of microstrip bandpass filters (BPFs) without any degradation in the electrical performance. For this purpose, a new resonator topology with rounded open-circuit terminations is proposed. Using this strategy, sharp edges are avoided, and a reduction of the maximum peak voltage (V-peak) is obtained, leading to higher peak power thresholds. An in-depth analysis of the variation of V-peak and PPHC as a function of the circle radius is also carried out. As a validation, two microstrip BPFs centered at 1.6 GHz with different end-circle sizes are designed, manufactured, and measured, showing a PPHC enhancement of 2.10 and 1.15 dB, respectively, compared to a standard microstrip BPF., This work was supported in part by the University of Alicante through the Fellowship Grant UAFPU2018-054 and in part by the Ministry of Science and Innovation through the sub-projects C41 and C43 of the Coordinated Project PID2019-103982RB.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bandpass Filter in Ridge Empty Substrate Integrated Waveguide With U-Shaped Impedance Inverters

  • David Herraiz|||0000-0002-3793-6078
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Morro, J. V.|||0000-0002-4699-6208
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Herraiz, Darío
  • Belenguer, Angel
[EN] Substrate integrated waveguides (SIWs) are a com- promise in terms of performance, cost, and volume between classical planar technologies and high quality three-dimensional waveguides. Empty SIWs (ESIW) reduce the losses by removing the dielectric substrate. In order to increase the usable bandwidth of the ESIW, a ridge layer can be added to the ESIW, thus obtaining the so-called ridge ESIW (RESIW). A transition from microstrip to RESIW has already been presented, but no other passive component has yet been implemented in this new technol- ogy. In this letter, we present a novel bandpass filter in RESIW, based on a new U-shaped geometry acting as impedance inverter, that can be easily fabricated with planar circuit manufacturing techniques. A design procedure for this filter is presented. A four-pole Chebyshev filter centered at 15 GHz, with a relative bandwidth of 3%, has been manufactured. The measured values for insertion and return losses are, respectively, lower than 1.05 dB and greater than 18 dB in the whole passband., This work was supported by the Ministerio de Ciencia e Innovacion (MICIN, Spanish Government) under Research Project PID-2019-103982RB-C41 and Project PID-2019-103982RB-C43 (funded by MICIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A New Family of Reconfigurable Waveguide Filters and Diplexers for High-Power Applications

  • Melgarejo, Juan Carlos
  • Ossorio, Javier
  • Guglielmi, Marco
  • San-Blas, Angel Antonio
  • Tronser, Tillman
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Valencia-Sullca, Joaquín Francisco
  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this paper, we discuss how the use of the recently developed modified tuning pin (MTP) can be extended to the design of filters and diplexers implemented in rectangular waveguide, that can be reconfigured in a number of discrete states, and that can be used in high-power payloads. As an application example, the design of two reconfigurable filters and a reconfigurable diplexer is fully described. The highpower behavior of these components (in particular, with respect to corona and multipaction effects) is also studied in detail, in order to demonstrate that the structures that we discuss can operate correctly under highpower conditions. Furthermore, comparisons between simulations and measurements of several prototypes are also included, showing an excellent agreement between simulated and experimental data, thereby fully validating both the design approach and the filter reconfiguration strategy., This work was supported by the Ministerio de Ciencia e Innovacion, Spanish Government, through the Subprojects C43 and C41 of theCoordinated Research and Development Project PID2019-103982RB under Grant MCIN/AEI/10.13039/501100011033
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancement of corona discharge thresholds in microstrip bandpass filters by using cover-ended resonators

  • Morales-Hernández, Aitor
  • Sánchez-Soriano, Miguel Á.
  • Marini, Stephan
  • Esteve, Laura
  • Guglielmi, Marco
  • Reglero Mangada, Marta Sofía|||0000-0002-3811-843X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This paper studies the corona discharge power thresholds in microstrip bandpass filters (BPFs) and, in particular, is focused on a solution based on lambda/2 cover-ended resonators to enhance their peak power handling capability (PPHC). First, a parametric analysis is carried out to evaluate the variation of the maximum electric field and the unloaded quality factor (Q(u)) as a function of the cover's geometrical dimensions (i.e. height, length, and width). Next, several microstrip BPFs centered at 1.6 GHz are designed, and their behaviors under moderate-to-high applied RF power signals are simulated to corroborate the previous study. A suitable number and size of covers are selected to enhance PPHC without barely degrading the filters' electrical performance and, consequently, without hardly increasing the insertion losses. Finally, two third-order filters with covers and without covers (benchmark prototype) are manufactured, by way of illustration, and they are tested in the European High-Power RF Space Laboratory to validate the good performance of the proposed solution, where a PPHC enhancement of 3.1 dB at high pressures is achieved as compared to the benchmark prototype., This work has been supported by the University of Alicante through the fellowship grant UAFPU2018-054 and by the "Ministerio de Ciencia e Innovacion" through the sub-projects C41 and C43 of the coordinated project PID2019-103982RB. The authors would like to thank Val Space Consortium for its contribution - Laboratories funded by the European Development Fund - A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Peak Power Handling Capability in Groove Gap Waveguide Filters Based on Horizontally Polarized Resonators and Enhancement Solutions

  • Morales-Hernández, Aitor
  • Sánchez-Soriano, Miguel Ángel
  • Marini, Stephan
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Taroncher Calduch, Mariam|||0000-0001-9068-1169
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This letter studies the peak power handling capability (PPHC) in groove gap waveguide filters based on horizontally polarized resonators. Moreover, a modification of the resonant cavity is proposed, where the central pins of the original structure are replaced by a rounded metal block. As a result of this change, the TE101-like mode can still be excited, but the maximum electric field strength is shifted to the center of the cavity, which leads to a higher PPHC. The main advantages of the original structure are maintained, and greater robustness in the manufacturing process is achieved. Next, some guidelines for the design of the coupling windows and the dimensions of the blocks are shown to minimize the electric field strength and, consequently, maximize the PPHC. Finally, two third-order bandpass filters (with pins and with blocks) centered at 16 GHz have been manufactured and tested in a measurement campaign, where a PPHC enhancement of 8.7 dB at high pressures is achieved for the novel solution presented in this work., This work was supported in part by the University of Alicante through the Fellowship Grant UAFPU2018-054 and in part by MCIN/AEI/10.13039/501100011033 through the Sub-Projects C41 and C43 of the Coordinated Project under Grant PID2019-103982RB.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efficient Design Procedure for Combline Bandpass Filters With Advanced Electrical Responses

  • Jamshidi Zarmehri, Hojjat
  • San Blas Oltra, Ángel Antonio
  • Neshati, Mohammad
  • Sharma, Abhishek
  • Coves Soler, Ángela
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this paper, a very efficient procedure for designing waveguide combline bandpass filters with an advanced electrical response is presented. The proposed technique is based on a segmentation strategy, which reduces the number of variables to be optimized by dividing the design process into simpler stages. The electrical response of an appropriate equivalent circuit model of the waveguide structure considered in each stage is used to generate the target curve needed in the optimization process. Moreover, the well- known Aggressive Space Mapping technique has been also implemented to improve the computational efficiency of the whole method. In order to validate the proposed design procedure, two high-order combline bandpass filters, with symmetric and asymmetric electrical responses including transmission zeros, have been successfully designed and simulated with full-wave analysis tools. Furthermore, as an experimental validation, a prototype of the symmetric filter has been manufactured, showing a good agreement between simulated and experimental data., This work was supported by the Ministerio de Ciencia e Innovación, Spanish Government, through the Subprojects C43 and C41 of the Coordinated Research and Development Projects PID2019-103982RB and TED2021-129196B, under Grant MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the Multipactor Effect in Groove Gap Waveguide Technology

  • Vague Cardona, José Joaquín|||0000-0001-5935-3116
  • Reglero Mangada, Marta Sofía|||0000-0002-3811-843X
  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Asensio, Irene
  • Coves, Ángela
  • San Blas, Ángel A.
  • Raboso, David
[EN] This article presents a theoretical and experimental comparative study of the different multipactor threshold values obtained in the rectangular waveguide (RW) and the groove gap waveguide (GGW). To this end, the multipactor effect has been first analyzed in an RW with a recently developed theoretical model. Then, the multipactor breakdown power levels in the equivalent GGW have been predicted with an accurate electron tracking code, showing a significant increment compared with the RW case. In order to validate these results, two E-plane WR-90 RW transformers have been designed with a full-wave electromagnetic simulation tool. The central sections of these transformers have been implemented in RW and GGW, respectively, and their multipactor breakdown power levels have also been predicted. The two designed transformers have been fabricated in aluminum and then measured in terms of electrical response (scattering parameters) and RF multipactor effect (power threshold values). All the experimental results agree well with the set of simulated data, thus fully validating the performed study., This work was supported by the Ministerio de Ciencia e Innovacion, Spanish Government, through the Subprojects C41 and C43 of the Coordinated Research and Development Project PID2019103982RB under Grant MCIN/AEI/10.13039/501100011033.
Repositorio Digital UPCT
Publication Artículo científico (JournalArticle)

Multimode Equivalent Networks for Shielded Microwave Circuits With Thick Metallizations

  • Gómez Molina, Celia
  • Quesada Pereira, Fernando Daniel
  • Marini, Stephan
  • Melcón Álvarez, Alejandro
  • Boria Esbert, Vicente Enrique
  • Guglielmi, Marco
In this article, we show how the multimode equivalent network (MEN) technique can be extended to the analysis of multilayer boxed planar microwave circuits that are built using a thick metallization. This analysis is carried out considering the thick metallic circuit as a length of the uniform waveguide. The problem is then divided into two waveguide steps (or junctions). We first obtain the equivalent network of the two junctions. Then, we cascade them to obtain the MEN of the complete circuit, thereby including the effect of finite thickness rigorously. A key aspect of the formulation that we propose is that it includes ports in the transverse plane of the circuit. In addition to theory, several shielded microwave filters using a thick metallization are also analyzed. An in-depth study of the numerical convergence is also performed for two practical examples. Simulation results are shown to be in good agreement with both commercial simulation tools and measurements, thereby fully validating our theoretical formulation., This work was supported in part by the Ministerio de Educación, Cultura y Deporte, Spanish Government, under Grant FPU15/02883; and in part by the Ministerio de Ciencia e Innovación through the sub-projects C41, C42 and C43 of the coordinated project under Grant PID2019-103982RB