Skip to main content

DISEÑO AVANZADO DE NUEVOS COMPONENTES DE ALTA FRECUENCIA EN TECNOLOGIAS GUIADAS COMPACTAS PARA FUTUROS SATELITES DE TELECOMUNICACION

PID2019-103982RB-C41

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 46
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Novel Prediction Methods of Multicarrier Multipactor for Space Industry Standards

  • Anza, Sergio
  • Puech, Jerome
  • Raboso, David
  • Wochner, Ulrich
  • Mader, Philippe
  • Koch, Olivier
  • Angevain, Jean-Christophe
  • Hong, Un-Pyo
  • Magnusson, Per
  • Montero, Isabel
  • Belhaj, Mohamed
  • Petit, John
  • Gil, Jordi
  • Vicente, Carlos
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] Multipactor prediction methods are of high relevance for the space industry in order to prevent its appearance during the design phase of RF high-power components. Up to the present time, prediction for multicarrier signals has been covered by an empirical rule, the 20-gap-crossing rule (20GCR), proposed in the 2003 version of the multipactor standard published by the European Cooperation for Space Standardization (ECSS). The 20GCR has been widely used by the space industry, although some studies have demonstrated that it might be inaccurate in some situations. The latest version of the ECSS multipactor standard, published in 2020, presents two novel methods for multipactor prediction with multicarrier signals: the pulsed method and the envelope sweep (ES) method, both simple, accurate enough, and suitable for industry standards. While the pulsed model is a simple and fast method based on a 1-D analytical theory, the ES method is more accurate and able to deal with real 3-D microwave structures. This article details both multipactor prediction methods, as well as their practical validation with a large dataset from previous analytical studies and experimental activities., The authors would like to thank the ESA-ESTEC and ASD-Eurospace for the creation and support of the ECSSE-ST-20-01 working group for the update of the ECSS multipactor standard, which has been the motivation of this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Increasing Peak Power Handling in Microstrip Bandpass Filters by Using Rounded-End Resonators

  • Morales-Hernández, Aitor
  • Sánchez-Soriano, Miguel Á.
  • Marini, Stephan
  • Guglielmi, Marco
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This work describes a new strategy for improving the peak power handling capability (PPHC) of microstrip bandpass filters (BPFs) without any degradation in the electrical performance. For this purpose, a new resonator topology with rounded open-circuit terminations is proposed. Using this strategy, sharp edges are avoided, and a reduction of the maximum peak voltage (V-peak) is obtained, leading to higher peak power thresholds. An in-depth analysis of the variation of V-peak and PPHC as a function of the circle radius is also carried out. As a validation, two microstrip BPFs centered at 1.6 GHz with different end-circle sizes are designed, manufactured, and measured, showing a PPHC enhancement of 2.10 and 1.15 dB, respectively, compared to a standard microstrip BPF., This work was supported in part by the University of Alicante through the Fellowship Grant UAFPU2018-054 and in part by the Ministry of Science and Innovation through the sub-projects C41 and C43 of the Coordinated Project PID2019-103982RB.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Through-Wire Microstrip-to-Empty-Substrate-Integrated-Waveguide Transition at Ka-Band

  • Ballesteros, José A.
  • Belenguer, Angel
  • Fernández, Marcos D.
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] The advantages of the Substrate-Integrated Waveguide (SIW) in terms of low profile, integration with Printed Circuit Board (PCB) and low cost are maintained by the Empty Substrate-Integrated Waveguide (ESIW). Moreover, as the dielectric fill is avoided, other advantages are also added: resonators with higher quality factor and lower insertion losses. Since 2014, when it was proposed, several devices for X-band to Ka-band applications have been accurately designed and manufactured. In this way, transitions are one of the most important components, as they allow the connection between the ESIW and other planar transmision lines such as microstrip. To accomplish this aim, different transitions have been proposed in the literature: based on sharp dielectric tapers combining metallized and non-metallized parts, which increases the manufacture complexity; with a broadened ESIW section, that is less complex at the cost of increasing reflection and radiation losses due to the abrupt discontinuity; based on tapered artificial dielectric slab matrix, more difficult to mechanize; using a tapered microstrip transition, with high radiation losses; and even transitions for multilayer devices. Among all the transitions, the most versatile one is the through-wire transition, as microstrip and ESIW can be implemented in different layers and allows any feeding angle between the microstrip line and the ESIW. In this paper the through-wire transition has been properly validated at Ku- and Ka-bands. Moreover, a back-to-back transition has been accurately manufactured in Ka-band with measured insertion losses lower than 3.7 dB and return losses higher that 11.7 dB, concluding that the transition is not frequency dependent., This work was supported by the Coordinated Research and Development Project PID2019-103982RB, Subprojects C44 and C41, funded by the Ministerio de Ciencia e Innovación Agencia Estatal de Investigación/10.13039/501100011033. This work was also supported under grant TED2021-129196B-C44 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microstrip to Double Ridge Empty Substrate Integrated Waveguide Transitions Based on Exponential and Superelliptical Dielectric Taper

  • David Herraiz|||0000-0002-3793-6078
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Herraiz, Darío
  • Belenguer, Ángel
[EN] The Empty Substrate IntegratedWaveguides (ESIW) maintain the advantages of the Substrate Integrated waveguide (SIW) (i.e. low-volume, low profile, lightweight, easy manufacturing, and integration in a planar circuit board), and present lower losses and higher quality factors in resonators due to the propagation of the fields through air, instead of through lossy dielectric as in SIW. The operational (monomode) bandwidth of the ESIW can be increased with the Single Ridge ESIW (SRESIW). However, the bandwidth can be further increased with the Double Ridge ESIW (DRESIW). In this paper, a brief study of possible DRESIW geometries has been performed, and two transitions from microstrip line (MS) to DRESIW with a dielectric taper geometry based on different equations are proposed. The new wideband transitions present simulated return losses in back-to-back configurations greater than 20 dB in more than a 95% fractional bandwidth. The transition that presents a better compromise between return losses, bandwidth and ease of fabrication is manufactured. The measured return and insertion losses are better than 19.7 dB and 1.5 dB, respectively, in a 96.4% fractional bandwidth., This work was supported by the Ministerio de Ciencia e Innovacion, Spanish Government, under Project PID2019-103982RB-C44 and Project PID2019-103982RB-C41.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dielectricless Floating-Patch Antenna at 28 GHz Fed With an Empty Substrate Integrated Waveguide

  • Fernández-Berlanga, Marcos D
  • Herraiz, Dario
  • Alomainy, Akram
  • Belenguer Martínez, Ángel
  • David Herraiz|||0000-0002-3793-6078
[EN] This paper presents a novel dielectricless floating patch antenna structure fed with an empty substrate integrated waveguide (ESIW). The main premise is to eliminate the dielectric from the patch design, which is equivalent to have an air-dielectric and leads to the necessity of a proper 3D printed plastic support to fasten the patch in the air above the ESIW, which is used as the feeding waveguide through a slot under the aperture-coupled approximation. A single-element antenna prototype has been studied, designed, optimized and manufactured in order to achieve excellent bandwidth, directivity, gain and beamwidth performance at 28 GHz. The main advantages of this prototype are a low fabrication cost, low losses, a low profile, high integration capability and removal of bulky dielectric material. On the whole, this prototype is a new suitable solution to be used in millimeter-wave 5G applications and beyond compared to the state-of-the-art., This work was supported in part by Ministerio de Ciencia e Innovacion, Spanish Government, through the Subproject C44 of the Coordinated Research and Development Project funded by MCIN/AEI/10.13039/501100011033 under Project PID2019-103982RB and Project TED2021-129196B; and in part by the Funds NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bandpass Filter in Ridge Empty Substrate Integrated Waveguide With U-Shaped Impedance Inverters

  • David Herraiz|||0000-0002-3793-6078
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Morro, J. V.|||0000-0002-4699-6208
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Herraiz, Darío
  • Belenguer, Angel
[EN] Substrate integrated waveguides (SIWs) are a com- promise in terms of performance, cost, and volume between classical planar technologies and high quality three-dimensional waveguides. Empty SIWs (ESIW) reduce the losses by removing the dielectric substrate. In order to increase the usable bandwidth of the ESIW, a ridge layer can be added to the ESIW, thus obtaining the so-called ridge ESIW (RESIW). A transition from microstrip to RESIW has already been presented, but no other passive component has yet been implemented in this new technol- ogy. In this letter, we present a novel bandpass filter in RESIW, based on a new U-shaped geometry acting as impedance inverter, that can be easily fabricated with planar circuit manufacturing techniques. A design procedure for this filter is presented. A four-pole Chebyshev filter centered at 15 GHz, with a relative bandwidth of 3%, has been manufactured. The measured values for insertion and return losses are, respectively, lower than 1.05 dB and greater than 18 dB in the whole passband., This work was supported by the Ministerio de Ciencia e Innovacion (MICIN, Spanish Government) under Research Project PID-2019-103982RB-C41 and Project PID-2019-103982RB-C43 (funded by MICIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Miniaturized Ultra-Wideband Bandpass Filter Based on Substrate Integrated Quasi-Lumped Resonators

  • Messaoudi, El Mehdi
  • Martínez Pérez, Jorge Daniel|||0000-0002-7119-3714
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] A compact ultra-wideband bandpass filter employing substrate integrated quasi-lumped resonators is presented in this paper. A multi-layer hybrid structure is proposed, combining quasi-lumped resonators and surface mount components. This allows a huge miniaturization degree due to the high capacitive loading. Moreover, strong magnetic and electric couplings can be implemented thus enabling the introduction of transmission zeros for improving response selectivity. A filter example centered at 5.35 GHz with a prescribed channel bandwidth of 2.9 GHz has been designed, manufactured and measured. The filter size is smaller than 7×7 mm2. The obtained results show the feasibility of the proposed approach., This project has received funding from the European Union Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 811232, the European Space Agency (ESA) under contract 4000124983, and the Ministerio de Ciencia e Innovación (Spanish Government) under project PID2019-103982R-C41
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Space Qualification of Metalized Additive Manufactured Filters

  • Bachiller Martin, Maria Carmen|||0000-0002-5518-5060
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Nova-Giménez, Vicente
  • Ferrer, Álvaro
[EN] The space industry is seeking new solutions for the development of lightweight, inexpensive and easy-to-manufacture on-board communication payload devices. One of the proposed technologies is additive manufacturing (AM) of polymeric materials that are subsequently metallized. The devices developed using this technique must be operational in the particular space environment conditions. In this work we study the integrity of filters made by additive manufacturing against the extreme conditions of mechanical stress, temperature and power management as described in the standard of the European Space Agency (ESA) for satellite payload. To carry out this qualification for space, two types of X-band filters with identical frequency responses have been designed and manufactured: a classic H-plane waveguide cavities filter, and three filters on surface-mount technology (SMT). Two of the SMT filters are low height rectangular cavities filters, while the third one is a high circular cavities filter. This selection was intended to verify that the AM technique offered good results regardless of the devices topology. Two mechanical vibration tests were performed: sinusoidal sweep and random vibration. These tests emulate the transport and launching conditions of the satellite payload. Furthermore, it was measured the mechanical natural frequency of the filters, and its variation after being exposed to the tests in order to evaluate their physical integrity. The thermal analysis was performed emulating the temperature profile experienced by the satellite payload during working conditions. Then, the power handling tests were carried out. The secondary electron emission yield of the material (metallized polymer) was firstly measured. The power levels, location and frequency at which a multipactor discharge would occur were analyzed for both, low-height and standard-height, filters. Finally, both filters were subjected to those power levels, under high vacuum conditions, to check if the said multipactor discharges occurred. The mechanical stress and temperature tests prove that the developed filters can survive the hard launching and operation conditions of commercial satellite payloads. The multipactor tests report the high power levels that the devices can handle without risk of radiofrequency (RF) breakage. All these tests allow to fully qualify the proposed manufacturing technique for spatial applications., This work was supported in part by the Agencia Valenciana de la Innovacion Research Project under Grant INNVA1/2020/84; in part by the Agencia Estatal de Investigacion, Spain, through the Fellowship for Training PhDs under Grant BES-2017-079728; and in part by the Ministerio de Ciencia e Innovacion (MICIN), Spanish Government through the Research and Development Project PID2019-103982RB-C41 under Grant MICIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Estrategia de Diseño para Aumentar la Capacidad en Potencia en Guias de Onda Groove-Gap

  • Morales-Hernández, Aitor
  • Sánchez-Soriano, Miguel Ángel
  • Marini, Stephan
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This work describes a new design strategy for improving the power handling capability (PHC) of groove gap waveguides (GGW). First, a theoretical analysis is carried out to study the distribution of the quasi-TE10 mode and the variation of the PHC for different configurations and frequencies. Then, in order to minimize the strength of the maximum electric field above the pins, three of the main geometrical dimensions of the nails are optimized. Finally, the numerical results show that by using this strategy, the corona discharge power thresholds can be enhanced without degrading the electrical response., Este trabajo ha sido financiado por la Universidad de Alicante mediante la beca de investigación UAFPU2018-054, y por el Ministerio de Ciencia e Innovación a través de los proyectos de investigación PID2019-103982RB-C41 y PID2019-103982RB-C43.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of Vibration Effects on Communication Filters in Substrate Integrated Technologies

  • Merello, José M.
  • Nova-Giménez, Vicente
  • Belenguer, Ángel
  • Bachiller Martin, Maria Carmen|||0000-0002-5518-5060
  • Esteban González, Héctor|||0000-0002-5936-658X
[EN] The growing need of space communication systems forces the industry to innovate in order to provide more robust, economical and flexible solutions. The new substrate integrated technologies enable the development of on-board communications devices with less weight and volume than the traditional waveguide-based ones. However, it is necessary to analyse the performance of these devices in the particular working conditions of satellite communications. This work studies the integrity of the electrical response of advanced communication filters under mechanical stress conditions. Four realisations of a Ku-band microwave filter in different substrate integrated technologies were developed and tested. Two mechanical vibration tests were performed: sinusoidal sweep and random vibration. These tests emulate the transport and launching conditions of the satellite payload. Furthermore, the mechanical natural frequency of the filters and its variation after being exposed to the tests have been measured to evaluate the devices integrity. For all the filters, this frequency variation is lower than 5 %, the standard threshold. This proves that the developed filters can survive the launching conditions of satellite payload, thus qualifying the technology for spatial applications., This work was supported in part by the Generalitat Valenciana Research Project (PROMETEO/2019/120); in part by the Agencia Estatal de Investigacion, Spain, under the Fellowship for Training Ph.D.s (BES-2017-079728); in part by the Ministerio de Ciencia e Innovacion (MICIN), Spanish Government, under Research and Development Project PID2019-103982RB-C41 (funded by MICIN/AEI/10.13039/501100011033); and in part by the Conferencia de Rectores de las Universidades Espanolas (CRUE)-Universitat Politecnica de Valencia (by paying the open access charge).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A New Model to Determine Passive Intermodulation Terms When Non-Contributing Carriers are Added to Classical Scenarios

  • Smacchia, Davide
  • Raboso García-Baquero, David
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This paper provides a new theoretical model for the characterization of passive intermodulation behaviour when non-contributing carriers (i.e., carriers which do not directly affect the particular non-linear contribution under analysis) are added to classical two or three carriers scenarios. According to traditional models, the power of a particular passive intermodulation frequency term is only related to the contributing carriers which combines in non-linear way to generate this term, thus the presence of additional (i.e., non-contributing) carriers should not affect to the predicted power of such an intermodulation product. However, recent laboratory tests reveal that non-contributing carriers do reduce the power of unrelated passive intermodulation terms. A heuristic model is proposed in this work to explain this effect, which shows a good matching with measured results already published in the technical literature. The study is focused in third order non-linear contributions, as being the most critical in practical applications., This work was supported in part by the Ministerio de Ciencia e Innovacion (Spanish Government) under Research and Development Project PID2019-103982RB-C41, and in part by the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Using Dielectric Rods to Reconfigure Combline Filters in Center Frequency and Bandwidth

  • Sharma, Abhishek
  • Guglielmi, Marco
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This article describes the use of dielectric rods to reconfigure combline filters both with respect to center frequency and bandwidth. In this context, a new filter topology is developed in order to maximize the achievable reconfiguration range. The design of a prototype is discussed in detail, clearly demonstrating the feasibility of center frequency and bandwidth reconfiguration, with the same filter structure, while maintaining an equiripple return loss. In addition to theory, a combline filter prototype is also fabricated, tuned and measured in several configurations showing excellent agreement with simulations, thereby fully validating both the basic concept and the design procedure, This work was supported in part by the European Union's Horizon 2020 Research and Innovation Program through the Marie Sklodowska-Curie Innovative Training Networks (ITN) (TESLA) under Grant 811232; and in part by the Minsiterio de Ciencia e Innovacion (MICIN), Spanish Government, through the Research and Development Project under Grant PID2019-103982RB-C41 (funded by MICIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A New Family of Reconfigurable Waveguide Filters and Diplexers for High-Power Applications

  • Melgarejo, Juan Carlos
  • Ossorio, Javier
  • Guglielmi, Marco
  • San-Blas, Angel Antonio
  • Tronser, Tillman
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Valencia-Sullca, Joaquín Francisco
  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this paper, we discuss how the use of the recently developed modified tuning pin (MTP) can be extended to the design of filters and diplexers implemented in rectangular waveguide, that can be reconfigured in a number of discrete states, and that can be used in high-power payloads. As an application example, the design of two reconfigurable filters and a reconfigurable diplexer is fully described. The highpower behavior of these components (in particular, with respect to corona and multipaction effects) is also studied in detail, in order to demonstrate that the structures that we discuss can operate correctly under highpower conditions. Furthermore, comparisons between simulations and measurements of several prototypes are also included, showing an excellent agreement between simulated and experimental data, thereby fully validating both the design approach and the filter reconfiguration strategy., This work was supported by the Ministerio de Ciencia e Innovacion, Spanish Government, through the Subprojects C43 and C41 of theCoordinated Research and Development Project PID2019-103982RB under Grant MCIN/AEI/10.13039/501100011033
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of Nematic Liquid Crystals at Microwave Frequencies

  • Nova-Giménez, Vicente
  • Villacampa, Belén
  • Kronberger, Rainer
  • Bachiller Martin, Maria Carmen|||0000-0002-5518-5060
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] The use of nematic liquid crystal (LC) mixtures for microwave frequency applications presents a fundamental drawback: many of these mixtures have not been properly characterized at these frequencies, and researchers do not have an a priori clear idea of which behavior they can expect. This work is focused on developing a new procedure for the extraction of the main parameters of a nematic liquid crystal: dielectric permittivity and loss tangent at 11 GHz under different polarization voltages; splay elastic constant K11, which allows calculation of the threshold voltage (Vth); and rotational viscosity ¿11, which allows calculating the response time of any arbitrary device. These properties will be calculated by using a resonator-based method, which is implemented with a new topology of substrate integrated transmission line. The LC molecules should be rotated (polarized) by applying an electric field in order to extract the characteristic parameters; thus, the transmission line needs to have two conductors and low electric losses in order to preserve the integrity of the measurements. This method was applied to a well-known liquid crystal mixture (GT3-23002 from MERCK) obtaining the permittivity and loss tangent versus bias voltage curves, the splay elastic constant, and the rotational viscosity of the mixture. The results validate the viability of the proposed method., This work was partially funded by the Generalitat Valenciana research project PROMETEO/2019/120, by Agencia Estatal de Investigacion (Spain) under the Fellowship for Training PhDs BES-2017-079728, by Ministerio de Ciencia e Innovacion, Spanish Government, under Project PID2019-103982RB-C41, and by Gobierno de Aragon (Ref.:E47_20R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In-Depth Study of the Corona Discharge Breakdown Thresholds in Groove Gap Waveguides and Enhancement Strategies for Inductive Bandpass Filters

  • Morales-Hernández, Aitor
  • Sánchez-Soriano, Miguel Ángel
  • Marini, Stephan
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This work focuses on the study of the corona discharge breakdown in groove gap waveguides (GGWs) and inductive bandpass filters (BPFs) based on this technology. With the main aim of improving the peak power handling capability (PPHC), the location of the maximum normalized electric field strength (|E¿MAX|) as a function of the geometrical parameters is analyzed. First, the research deals with wave-guiding structures, comparing the distribution of the transverse electric TE10-like mode of a GGW to that of an equivalent rectangular waveguide (RW). Next, a design strategy based on the adjustment of the geometrical dimensions of the bed of nails is proposed, thus achieving a considerable reduction of |E¿MAX|. The second part of this paper aims for vertically polarized GGW BPFs, where the inductive irises become the most critical part of the component. By a simple modification of their dimensions, a second design criterion is suggested for improving the PPHC. Finally, several Ku-band BPFs centered at 14 GHz and 16 GHz have been manufactured and experimentally verified at the European High-Power Radiofrequency Space Laboratory. This measurement campaign shows peak power thresholds up to 1.09 kW and 3.59 kW at 600 mbar for the non- and full-optimized GGW BPFs, respectively, thereby demonstrating a PPHC enhancement up to 5.16 dB in the high-pressure range when both strategies, proposed in this work, are used., The authors would like to thank the European Space Agency (ESA) and Val Space Consortium (VSC)-Laboratories funded by the European Regional Development Fund-A Way of Making Europe, and the Antennas and Propagation Laboratory [Instituto de Telecomunicaciones y Aplicaciones Multimedia (APL-iTEAM UPV)].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancement of corona discharge thresholds in microstrip bandpass filters by using cover-ended resonators

  • Morales-Hernández, Aitor
  • Sánchez-Soriano, Miguel Á.
  • Marini, Stephan
  • Esteve, Laura
  • Guglielmi, Marco
  • Reglero Mangada, Marta Sofía|||0000-0002-3811-843X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This paper studies the corona discharge power thresholds in microstrip bandpass filters (BPFs) and, in particular, is focused on a solution based on lambda/2 cover-ended resonators to enhance their peak power handling capability (PPHC). First, a parametric analysis is carried out to evaluate the variation of the maximum electric field and the unloaded quality factor (Q(u)) as a function of the cover's geometrical dimensions (i.e. height, length, and width). Next, several microstrip BPFs centered at 1.6 GHz are designed, and their behaviors under moderate-to-high applied RF power signals are simulated to corroborate the previous study. A suitable number and size of covers are selected to enhance PPHC without barely degrading the filters' electrical performance and, consequently, without hardly increasing the insertion losses. Finally, two third-order filters with covers and without covers (benchmark prototype) are manufactured, by way of illustration, and they are tested in the European High-Power RF Space Laboratory to validate the good performance of the proposed solution, where a PPHC enhancement of 3.1 dB at high pressures is achieved as compared to the benchmark prototype., This work has been supported by the University of Alicante through the fellowship grant UAFPU2018-054 and by the "Ministerio de Ciencia e Innovacion" through the sub-projects C41 and C43 of the coordinated project PID2019-103982RB. The authors would like to thank Val Space Consortium for its contribution - Laboratories funded by the European Development Fund - A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Remote Reconfiguration of Microwave Filters Using Dielectric Tuners

  • Sharma, Abhishek
  • Ossorio, Javier
  • Smacchia, Davide
  • Tronser, Tillman
  • Guglielmi, Marco
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] The objective of this article is to explore the use of dielectrics to reconfigure remotely microwave filters in rectangular waveguide. To start, we study experimentally the phase shift that is achievable using dielectric tuning elements in a rectangular waveguide. We then compare the results obtained with the performance of standard metallic tuning cylinders and screws. Next, the passive intermodulation (PIM) behavior of dielectric tuning elements is investigated experimentally. The PIM results obtained using dielectrics are then compared with the ones of metallic tuning elements. After that, the measured results for a filter tuned with a number of different dielectric tuning elements are discussed to identify the required relation between cavity size, dielectric constant, and tuner diameter. As a proof of concept, we then design, manufacture, and test two filters, one in WR75 and the other in WR90. Both simulated and measured results are then presented clearly demonstrating that the structures discussed can indeed be reconfigured (or tuned) both in terms of filter center frequency and bandwidth. Finally, computer-driven linear actuators are connected to the dielectric tuners, and the remote tuning capability is successfully demonstrated., This work was supported in part by the European Union's Horizon 2020 Research and Innovation Program, through the Marie Sklodowska-Curie ITN (TESLA) under Grant 811232 and in part by the Minsiterio de Ciencia e Innovacion (MICIN, Spanish Government) through the Research and Development Project under Grant PID2019-103982RB-C41 (funded by MICIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Compact Dual-Band and Wideband Filters With Resonant Apertures in Rectangular Waveguide

  • Valencia-Sullca, Joaquín Francisco
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Guglielmi, Marco
[EN] The objective of this article is to describe a new family of microwave bandpass filters in the rectangular waveguide based on resonant apertures, which can be used to implement both single- and dual-band transfer functions. The use of capacitive stubs and a staircase configuration is also discussed in order to enhance the out-of-band response and the selectivity of the filter with respect to the state of the art. Finally, simulations are compared with measured results, showing very good agreement, thereby fully validating both the new filter topologies and the design procedure., This work was supported in part by the Ministerio de Ciencia e Innovacion, Spanish Government, through the Research and Development Project PID2019-103982RB, under Grant MCIN/AEI/10.13039/501100011033; and in part by the Generalitat Valenciana under Santiago Grisolia Grant GRISOLIA/2017/073. This article is an expanded version from the IEEE MTT-S International Microwave Symposium (IMS 2021), Atlanta, GA, USA, June 20-25, 2021 [DOI: 10.1109/IMS19712.2021.9574801].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Resistorless Implementation of Lossy Filters Using Coaxial SIW Resonators With Non-uniform Q

  • Marín-Martínez, Sandra
  • Martínez Pérez, Jorge Daniel|||0000-0002-7119-3714
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] A technique for designing bandpass filters with very flat amplitude response is presented in this paper. The approach is based on the use of non-uniform-Q resonators implemented in coaxial substrate integrated waveguide (SIW) technology. An important unloaded Q-factor ratio can be obtained by adequately controlling several layout parameters of the basic resonator cell, thus enabling to optimize the in-band response of the filter. The approach is experimentally demonstrated at X-band frequencies by designing two resonators in Rogers RO4003C (¿ r = 3.55, tan ¿ = 0.0027) with unloaded Q-factors going from 53 to 270. Then, a 4th-order filter example with 2 transmission zeros is designed, fabricated and measured based on the former results. The filter is centered at 10 GHz with a 280 MHz bandwidth showing a in-band flatness better than 1 dB-pp, which would require an unloaded Q-factor about 600 for a uniform-Q implementation, therefore showing the advantages of the proposed approach for implementing bandpass filters for high-end RF and microwave applications.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

3-D Printed Waveguide Filters: Manufacturing Process and Surface Mounted Assembly

  • Nova-Giménez, Vicente
  • Pascual-Folch, Jordi
  • Ferrer, Álvaro
  • Ponce-Gonzalez, Luis Nicolas
  • Bachiller Martin, Maria Carmen|||0000-0002-5518-5060
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This article presents a new approach to manufacturing and assembling inexpensive, lightweight devices using 3-D-printed waveguides, and surface-mount technology (SMT). Specifically, we have employed stereolithography (SLA) and a combination of electroless and electroplating processes to develop cavity filters in the X- and C-bands. The filters can be efficiently integrated into planar circuits via a reliable and simple transition that enables surface-mount assembly. Two resonator topologies, circular and rectangular, were examined and compared to develop X-band filters, and a triplet topology has been developed for the C-band. The measured frequency responses were consistent with simulations, with insertion losses below 2 and 1.43 dB for X- and C-bands, respectively. We have conducted several Monte Carlo analyses and a dimensional study to assess the impact of manufacturing tolerances on filter per-formance. Furthermore, a rectangular cavity resonator has been used to approximate the effective conductivity of the deposited copper coating, considering the detrimental effects of oxidation and surface roughness. The resulting effective conductivity of 17.7 MS/m was found to be higher than the current state-of-the-art values. Finally, SMT assembly offers several advantages over traditional methods, including reduced size, simplified assembly, and integration with planar systems. The results presented in this work indicate that combining 3-D printing and SMT provides a simple and efficient solution for developing lightweight and highly integrated components with superior performance., This work was supported in part by the Agencia Valenciana de la Innovacion Research Projects under Grant INNVA1/2020/84 and Grant INNEST/2020/124, in part by the Agencia Estatal de Investigacion (Spain) through the Fellowship for Training Ph.D. Scholars under Grant BES-2017-079728, and in part by the Ministeriode Ciencia e Innovacion (MICIN, Spanish Government) through the Research and Development Project under Grant PID2019-103982RB-C41(under Grant MICIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Additive manufacturing and metallization of high-frequency communication devices

  • Bachiller Martin, Maria Carmen|||0000-0002-5518-5060
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Nova-Giménez, Vicente
  • Ferrer, Álvaro
  • Martínez, Asunción
  • Sandoval, Nacho
  • Ponce-Gonzalez, Luis Nicolas
[EN] Additive manufacturing (AM) can be applied to new scenarios where traditional subtractive techniques limit geometry and assembling freedom. One of these scenarios is the development of high-frequency devices for communication systems, where AM offers the capability to develop high-complexity geometries, reducing the devices' weight and cost. This is extraordinarily convenient for recent small satellites where size, weight, and integration are vital. This work presents an AM process specially optimized to develop communication devices. Industry needs have been studied, and materials and manufacturing techniques have been chosen accordingly. Two communication devices, a band-pass filter and a horn antenna, have been developed using two VAT photopolymerization (VPP) processes and different resins. Printed devices were metallized using a two-step process based on a first electroless metallisation and a final galvanic plating. The manufactured pieces were sandblasted prior to metallization to increase plating adhesion and reduce surface roughness. Finally, several dimensional analyses were performed to evaluate the effect of finishing and plating on the manufacturing process using scanning electron microscopy, profilometry, and contact metrology. The electromagnetic response of developed devices is excellent and comparable with commercial devices manufactured with subtractive techniques. A preliminary tolerance analysis was carried out to approximate the systematic deviation of the overall manufacturing process, considering the erosion of sandblasting and the thickness of copper plating. These deviations were compensated in the design step to improve the dimensional accuracy of the band-pass filter., This work was supported by the Agencia Valenciana de la Innovación research project INNVA1/2020/84, by the Agencia Estatal de Investigación (Spain) under the Fellowship for Training PhDs BES-2017-079728, and by the Ministerio de Ciencia e Innovación (MICIN, Spanish Government) through the Research and Development projectPID2019-103982RB-C41 (under Grant MICIN/ AEI/10. 13039/501100011033). Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A New Reference Sample for High-Frequency Multipactor Testing

  • González-Santatecla, Pablo
  • Smacchia, Davide
  • Rodríguez Pérez, Ana María
  • Mata-Sanz, Rafael
  • Alcaide-Guillén, Carlos|||0000-0001-5772-9204
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Morro, J. V.|||0000-0002-4699-6208
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] Multipactor (MP) is a high-power effect severely limiting the performance of satellite communication links. A reference sample is normally used in the experimental setups for MP testing in order to verify its correct operation. However, the low gaps required for high frequencies jeopardize the manufacturability of the devices traditionally used for this purpose. A new reference sample, based on a stepped-impedance resonator (SIR), is proposed in this letter. The key design considerations are also outlined. A prototype operating between 17 and 18 GHz has been manufactured and tested, proving the novel structure allows higher gaps, and is, thus, suitable for higher frequency bands., This work was supported in part by the Ministerio de Ciencia e Innovacion (Spanish Government) under Research and Development Project PID2019-103982RB-C41, in part by the European Space Agency(ESA) through several research and development activities, and in part by the ESA-VSC European High Power RF and Space Materials Laboratories for contributing with its installations through the European Regional Development Fund. The work of Pablo Gonzalez was supported by the FPU Fellowship ofthe Ministerio de Educacion, Cultura y Deporte under Grant FPU17/02901.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Compact Substrate Integrated Waveguide Wideband Bandpass Filter With Post-Manufacturing Tuning Capabilities

  • Messaoudi, El Mehdi
  • Martínez Pérez, Jorge Daniel|||0000-0002-7119-3714
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this paper, a miniaturized wideband bandpass filter in coaxial substrate integrated waveguide (SIW) technology is presented. To improve the response selectivity and coupling control, a multi-layer structure has been implemented, introducing both strong magnetic and electric couplings. To reduce the physical size of the device, surfaced-mounted device (SMD) capacitors have been integrated on the top layer. These allow both resonant frequency and capacitive coupling level control. Thus, a 4-th order Chebyshev filter with an absolute bandwidth (BW) of 2.9 GHz centered at 5.35 GHz has been designed, fabricated and measured. An extremely small filter size of 7 x 7 mm(2) has been obtained. A study of manufacturing tolerances are also presented in this paper, together with a post-manufacturing response correction allowed by the SMD elements. As it is shown in the paper, the filter's out-of-band rejection can be easily enhanced by introducing additional transmission zeros (TZs)., This work was supported in part by the European's Union Horizon 2020 Research and Innovation Programme under the MarieSklodowska-Curie Innovative Triangle Networks (ITN) through TESLA under Grant 811232, in part by the European Space Agency(ESA) under Contract 4000124983, in part by the Ministerio de Ciencia e Innovacion (MICIN) through Spanish Government under the Research and Development Project PID2019-103982R-C41 and Project MICIN/AEI/10.13039/501100011033, and in part by the funding for open access charge: Universitat Politecnica de Valencia
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Transition from Microstrip Line to Ridge Empty Substrate Integrated Waveguide Based on the Equations of the Superellipse

  • David Herraiz|||0000-0002-3793-6078
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Martínez, Juan A.
  • Belenguer, Ángel
  • Nova-Giménez, Vicente
[EN] In recent years, multiple technologies have been proposed with the aim of combining the characteristics of traditional planar and non-planar transmission lines. The first and most popular of these technologies is the Substrate Integrated Waveguide (SIW), where rows of metallic vias are mechanized in a printed circuit board (PCB). These vias, together with the top and bottom metal layers of the PCB, form a channel for the propagation of the electromagnetic fields, similar to that of a rectangular waveguide, but through a dielectric body, which increases the losses. To reduce these losses, the empty substrate integrated waveguide (ESIW) was recently proposed. In the ESIW, the dielectric is removed from the substrate, and this results in better performance (low profile and easy manufacturing as in SIW, but lower losses and better quality factor for resonators). Recently, to increase the operational bandwidth (monomode propagation) of the ESIW, the ridge ESIW (RESIW) and a transition from RESIW to microstrip line was proposed. In this work, a new and improved wideband transition from microstrip line (MS) to RESIW, with a dielectric taper based on the equations of the superellipse, is proposed. The new wideband transition presents simulated return losses in a back-to-back transition greater than 20 dB in an 87% fractional bandwidth, while in the previous transition the fractional bandwidth was 82%. This is an increment of 5%. In addition, the transition presents simulated return losses greater than 26 dB in an 84% fractional bandwidth. For validation purposes, a back-to-back configuration of the new transition was successfully manufactured and measured. The measured return loss is better than 14 dB with an insertion loss lower than 1 dB over the whole band., This research was funded by Ministerio de Ciencia e Innovación, Spanish Government, under Research Projects PID2019-103982RB-C44 and PID2019-103982RB-C41.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hybrid Wideband Staircase Filters in Rectangular Waveguide With Enhanced Out-of-Band Response

  • Valencia-Sullca, Joaquín Francisco
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Guglielmi, Marco
[EN] The objective of this article is to describe the design of a new family of wideband filters in a rectangular waveguide based on hybrid couplings and a staircase configuration. The use of E-plane T-junctions and E-plane folded structures is also discussed, in order to enhance the out-of-band response and the selectivity of the filter with respect to the current state of the art. The design of several hybrid filter prototypes is discussed in detail, including manufacturing sensitivity and high-power analysis. Finally, simulations and measurements for an eight-pole filter prototype are also compared, showing very good agreement, thereby fully validating both the design procedure and the new filter topology that we propose., This work was supported in part by the Ministerio de Ciencia e Innovacion (Spanish Government) through the R&D Project under Grant PID2019-103982RB-C41 and in part by Generalitat Valenciana under Santiago Grisolia Grant GRISOLIA/2017/073.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Inline Combline Filters of Order N With up to N+1 Transmission Zeros

  • Vague Cardona, José Joaquín|||0000-0001-5935-3116
  • Rubio Garrido, David|||0000-0002-9471-2011
  • Fuentes-Pascual, Miguel Ángel|||0000-0001-7072-1127
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Guglielmi, Marco
[EN] In this paper we describe several alternative inline implementations for combline filters with transmission zeros located both below and above the pass-band. A systematic design procedure is also presented using a lumped-element equivalent circuit. Following the design procedure that we propose, up to N+1 transmission zeros can be implemented with an inline filter of order N. The generation of the transmission zeros is explained physically in terms of mixed inductive and capacitive couplings. Several filters are also manufactured and tested. Good agreement between measured and simulated results is demonstrated thereby fully validating the new filter concepts., This work was supported by the Ministerio de Ciencia e Innovacion under Coordinated Project PID2019-103982RB-C41.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High Power RF Discharge Detection Technique Based on the In-Phase and Quadrature Signals

  • Monerris-Belda, Oscar
  • Diaz-Caballero, Elena
  • Petit, John
  • Gimeno, Benito
  • Raboso, David
  • Raúl Cercera
  • Rodríguez, Miguel
  • Alcaide-Guillén, Carlos|||0000-0001-5772-9204
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] High power radio frequency (RF) breakdown testing is a subject of great relevance in the space industry, due to the increasing need of higher transmission power and smaller devices. This work presents a novel RF breakdown detection system, which monitors the same parameters as the microwave nulling system but with several advantages. Where microwave nulling-a de facto standard in RF breakdown testing-is narrowband and requires continuous tuning to keep its sensitivity, the proposed technique is broadband and maintains its performance for any RF signal. On top of that, defining the detection threshold is cumbersome due to the lack of an international standardized criterion. Small responses may appear in the detection system during the test and, sometimes, it is not possible to determine if these are an actual RF breakdown or random noise. This new detection system uses a larger analysis bandwidth, thus reducing the cases in which a small response is difficult to be classified. The proposed detection method represents a major step forward in high power testing as it runs without human intervention, warning the operator or decreasing the RF power automatically much faster than any human operator., This work was supported in part by the "Ministerio de Ciencia e Innovacion," Spanish Government, under Project PID2019-103982RB-C41, and in part by the European High RF Power Space Laboratory of the European Space Agency and Val Space Consortium for contributing with its installations, Laboratory co-funded by the European Regional Development Fund-A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Novel In-Line ESICL-to-ESIW Transition for High-Performance Empty Substrate Integrated Microwave Systems

  • David Herraiz|||0000-0002-3793-6078
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Herraiz, Dario
  • Belenguer, Ángel
[EN] This letter introduces a novel transition from empty substrate integrated coaxial line (ESICL) to empty substrate integrated waveguide (ESIW). Using a standard planar manufacturing process, this transition enables the development of a complete microwave system integrating various technologies. The design procedure is outlined, and two transitions from ESICL to ESIW for the Ku -and K -bands show simulated return loss better 30 dB in the entire frequency ranges. To validate feasibility, a back-to-back ESIW¿ESICL¿ESIW transition is fabricated and measured, yielding return losses higher than 19 dB and insertion losses lower than 0.45 dB., This work was supported in part by the Ministerio de Ciencia e Innovación, Spanish Government, under Research Projects PID2019-103982RB-C41 and PID2019- 103982RB-C44; and in part by MICIN/AEI/10.13039/501100011033 under Grant TED2021-129196B-C41 and Grant TED2021-129196B-C44.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis de maestría (MasterThesis)

Estudio y optimización de métodos para la estimación del umbral de descarga multipactor, Study and optimization of methods for multipactor threshold evaluation, Estudi i optimització de mètodes per a l&apos, estimació del llindar de descàrrega multipactor

  • Rodríguez, Miguel
[ES] En esta tesina de máster (TFM) se implementan mecanismos para estimar de forma precisa y eficiente el nivel de descarga multipactor. El Método Coarse permite predecir la potencia umbral del efecto multipactor en dispositivos de RF (como líneas de transmisión o filtros) con un menor coste computacional que un simulador de física de partículas. Para ello es necesario obtener las curvas de crecimiento de la población de electrones a distintas potencias de RF en las regiones con mayor susceptibilidad a descargas multipactor. Un punto débil del método es que las curvas de crecimiento son ruidosas, y este hecho puede llegar a empeorar la precisión de las estimaciones. Con el objeto de mejorar dicha precisión, se implementarán métodos de ajuste y suavizado para las curvas de factor de crecimiento de los electrones mediante diferentes mecanismos de filtrado o reducción de ruido. La mejora en la precisión se evaluará mediante la comparación con simuladores electromagnéticos convencionales para señales multiportadora., [EN] The main aim of this master's degree final project, is to improve the socalled Coarse Method. The Coarse Method significantly improves the execution time of the multipactor power threshold predictions for RF (Radio Frequency) components. The main input to the Coarse Method are the growth factors obtained from the electron population evolution with time for different power levels of an RF continuous-wave excitation signal. The accuracy of the Coarse Method prediction is hindered by the fact the curve relating the input power and the growth factors is noisy. With the aim of improving the accuracy, different smoothing techniques shall be studied to mitigate the effect of the noise. Finally, the improvement linked to the use of the smoothing technique is assessed by comparing the results with the ones provided by the original Coarse Method, and with the results obtained by means of Particle-in-Cell (PIC) simulators.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multipactor Threshold Estimation Techniques Based on Circuit Models, Electromagnetic Fields and Particle Simulators

  • González-Santatecla, Pablo
  • Monerris, Óscar
  • Petit, John
  • Rodríguez Pérez, Ana María
  • Alcaide-Guillén, Carlos|||0000-0001-5772-9204
  • Raúl Cercera
  • Rodríguez, Miguel
  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Vague Cardona, José Joaquín|||0000-0001-5935-3116
  • Morro, J. V.|||0000-0002-4699-6208
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] Multipactor has become a keylimiting factor of the final performance of satellite communication systems, due to the increase in power levels and/or operating frequency bands. As a result, the critical components of these systems must meet demanding multipactor specifications which should be considered during the design process. This paper describes the different techniques available to predict the multipactor threshold power for radio frequency (RF) and microwave passive hardware under continuous wave (CW) excitation, from cumbersome particle simulations to fast approximate methods based on circuit models. All these techniques have been described and compared together for the first time, including also a detailed description of the configuration issues of commercial particle simulators required to obtain accurate multipactor threshold predictions. The techniques are applied to both wideband and narrowband application examples. The predictions have been compared with measured thresholds of manufactured samples obtained with a novel multipactor test bed, thus allowing to highlight the advantages and limitations of each technique and particle simulator. From this paper, it will be possible to choose the most suitable procedure (and an appropriate simulator, if needed) to obtain multipactor threshold prediction of passive hardware., The work of Pablo González was supported by the FPU Fellowship of the Ministerio de Educación, Cultura y Deporte, Spanish Government, with Ref. FPU17/02901. This work was supported in part by the Ministerio de Ciencia e Innovación (MICIN, Spanish Government) under R&D Project PID2019-103982RB-C41 (funded by MICIN/AEI/10.13039/501100011033), and in part by the European Space Agency (ESA) under Project H2020-ESA-007 (funded by the European Union's Horizon 2020 Research and Innovation Program).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Peak Power Handling Capability in Groove Gap Waveguide Filters Based on Horizontally Polarized Resonators and Enhancement Solutions

  • Morales-Hernández, Aitor
  • Sánchez-Soriano, Miguel Ángel
  • Marini, Stephan
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Taroncher Calduch, Mariam|||0000-0001-9068-1169
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This letter studies the peak power handling capability (PPHC) in groove gap waveguide filters based on horizontally polarized resonators. Moreover, a modification of the resonant cavity is proposed, where the central pins of the original structure are replaced by a rounded metal block. As a result of this change, the TE101-like mode can still be excited, but the maximum electric field strength is shifted to the center of the cavity, which leads to a higher PPHC. The main advantages of the original structure are maintained, and greater robustness in the manufacturing process is achieved. Next, some guidelines for the design of the coupling windows and the dimensions of the blocks are shown to minimize the electric field strength and, consequently, maximize the PPHC. Finally, two third-order bandpass filters (with pins and with blocks) centered at 16 GHz have been manufactured and tested in a measurement campaign, where a PPHC enhancement of 8.7 dB at high pressures is achieved for the novel solution presented in this work., This work was supported in part by the University of Alicante through the Fellowship Grant UAFPU2018-054 and in part by MCIN/AEI/10.13039/501100011033 through the Sub-Projects C41 and C43 of the Coordinated Project under Grant PID2019-103982RB.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efficient Design Procedure for Combline Bandpass Filters With Advanced Electrical Responses

  • Jamshidi Zarmehri, Hojjat
  • San Blas Oltra, Ángel Antonio
  • Neshati, Mohammad
  • Sharma, Abhishek
  • Coves Soler, Ángela
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this paper, a very efficient procedure for designing waveguide combline bandpass filters with an advanced electrical response is presented. The proposed technique is based on a segmentation strategy, which reduces the number of variables to be optimized by dividing the design process into simpler stages. The electrical response of an appropriate equivalent circuit model of the waveguide structure considered in each stage is used to generate the target curve needed in the optimization process. Moreover, the well- known Aggressive Space Mapping technique has been also implemented to improve the computational efficiency of the whole method. In order to validate the proposed design procedure, two high-order combline bandpass filters, with symmetric and asymmetric electrical responses including transmission zeros, have been successfully designed and simulated with full-wave analysis tools. Furthermore, as an experimental validation, a prototype of the symmetric filter has been manufactured, showing a good agreement between simulated and experimental data., This work was supported by the Ministerio de Ciencia e Innovación, Spanish Government, through the Subprojects C43 and C41 of the Coordinated Research and Development Projects PID2019-103982RB and TED2021-129196B, under Grant MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Analysis and design of re-configurable combline filters using dielectric tuners

  • Sharma, Abhishek
  • Guglielmi, Marco
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This article describes different tunable structures for typical waveguide combline filters. In this context, several configurations using dielectric tuners have been studied for resonators, inter-resonator couplings, and input/output couplings. All configurations are analyzed in a wide frequency range showing advantages and drawbacks. Using the best structures in terms of performance, a fully re-configurable filter has been designed. The filter provides a wide tuning range in terms of center frequency while maintaining a high Q factor, and a constant bandwidth and return losses. A first filter prototype has been designed at L-band. The structure demonstrates a tunability in terms of frequency range of about 400 %, thereby clearly demonstrating that the approach we propose is indeed a very promising candidate for implementing tunable combline filters based on dielectric tuners.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Inductive Cascaded Quadruplet With Diagonal Cross-Coupling in Rectangular Waveguide

  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Cameron, Richard J.
  • Guglielmi, Marco
  • Melgarejo, Juan Carlos
[EN] The objective of this paper is to show how inductive quadruplets with diagonal cross-couplings can be used as building blocks for filters in rectangular waveguide. Starting with the coupling matrix synthesis, we show how very general transfer functions can be easily implemented with a very simple step-by-step procedure. In addition to coupling matrix theory, we also describe distributed networks that can be effectively used to carry out the transition from coupling matrix descriptions to actual waveguide structures. Several filter design examples are also described in detail. Finally, measured results are also discussed showing excellent agreement with simulations, thereby fully validating both the new family of filter structures and the related design procedures., This work was supported by the Ministerio de Ciencia e Innovacion (MICIN) (MICIN/AEI/10.13039/501100011033), Spanish Government, through the Research and Development Project under Grant PID2019-103982RB-C41.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design of a Wide-Bandwidth, High-Gain and Easy-to-Manufacture 2.4 GHz Floating Patch Antenna Fed with the Through-Wire Technique

  • Fernández, Marcos D.
  • Herraiz, Dario
  • Alomainy, Akram
  • Belenger, Angel
  • David Herraiz|||0000-0002-3793-6078
[EN] This paper presents a feasibility study for designing a floating patch antenna structure fed with a probe from a microstrip. The main premise is to eliminate the dielectric in the patch design, which is equivalent to having an air dielectric and leads to the necessity of proper support to fasten the patch in the air. The novelty of this paper is that this new device, apart from being fed with the though-wire technique directly from the microstrip line, has to be, by design, robust and easy to manufacture, and, at the same time, it has to present, simultaneously, good values in all of the performance indexes. A prototype has been designed, manufactured, and measured with good performance results: a bandwidth higher than 10% around 2.4 GHz, a radiation efficiency higher than 96%, a 9.63 dBi gain, and a wide beamwidth. The main advantages of this prototype, together with its good performance indexes, include its low fabrication cost, low losses, light weight, robustness, high integration capability, the complete removal of the dielectric material, and the use of a single post for feeding the patch while simultaneously fixing its floating position., This work was supported by the Ministerio de Ciencia e Innovacion of the Spanish Government through the Subproject C44 of the Coordinated Research and Development Project PID2019-103982RB under Grant MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the Multipactor Effect in Groove Gap Waveguide Technology

  • Vague Cardona, José Joaquín|||0000-0001-5935-3116
  • Reglero Mangada, Marta Sofía|||0000-0002-3811-843X
  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Asensio, Irene
  • Coves, Ángela
  • San Blas, Ángel A.
  • Raboso, David
[EN] This article presents a theoretical and experimental comparative study of the different multipactor threshold values obtained in the rectangular waveguide (RW) and the groove gap waveguide (GGW). To this end, the multipactor effect has been first analyzed in an RW with a recently developed theoretical model. Then, the multipactor breakdown power levels in the equivalent GGW have been predicted with an accurate electron tracking code, showing a significant increment compared with the RW case. In order to validate these results, two E-plane WR-90 RW transformers have been designed with a full-wave electromagnetic simulation tool. The central sections of these transformers have been implemented in RW and GGW, respectively, and their multipactor breakdown power levels have also been predicted. The two designed transformers have been fabricated in aluminum and then measured in terms of electrical response (scattering parameters) and RF multipactor effect (power threshold values). All the experimental results agree well with the set of simulated data, thus fully validating the performed study., This work was supported by the Ministerio de Ciencia e Innovacion, Spanish Government, through the Subprojects C41 and C43 of the Coordinated Research and Development Project PID2019103982RB under Grant MCIN/AEI/10.13039/501100011033.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Design Strategy and Considerations to Improve Corona Discharge Breakdown in Groove Gap Waveguides

  • Morales-Hernández, Aitor
  • Ferrando-Rocher, Miguel
  • Sánchez-Soriano, Miguel Ángel
  • Marini, Stephan
  • Boria Esbert, Vicente Enrique
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
This paper studies the corona discharge breakdown thresholds in groove gap waveguides, and proposes a design strategy to enhance its peak power handling capability (PPHC). The theoretical analysis is focused on the study of the quasi-TE 10 mode, and on the PPHC at different frequencies and multiple arrangements of the pin dimensions of the bed of nails. Next, the geometrical parameters width, length and separation of such pins are optimized for improving peak power limits. Finally, the simulated results show reasonably good performance with respect to the equivalent rectangular waveguide power limit.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Enhancement of corona discharge thresholds in microstrip bandpass filters by using cover-ended resonators

  • Morales-Hernández, Aitor
  • Sánchez-Soriano, Miguel Ángel
  • Marini, Stephan
  • Reglero, Marta
  • Esteve, Laura
  • Boria Esbert, Vicente Enrique
  • Guglielmi, Marco
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
This paper studies the corona discharge power thresholds in microstrip bandpass filters (BPFs) and, in particular, is focused on a solution based on λ/2 cover-ended resonators to enhance their peak power handling capability (PPHC). First, a parametric analysis is carried out to evaluate the variation of the maximum electric field and the unloaded quality factor (Qu) as a function of the cover’s geometrical dimensions (i.e. height, length, and width). Next, several microstrip BPFs centered at 1.6 GHz are designed, and their behaviors under moderate-to-high applied RF power signals are simulated to corroborate the previous study. A suitable number and size of covers are selected to enhance PPHC without barely degrading the filters’ electrical performance and, consequently, without hardly increasing the insertion losses. Finally, two third-order filters with covers and without covers (benchmark prototype) are manufactured, by way of illustration, and they are tested in the European High-Power RF Space Laboratory to validate the good performance of the proposed solution, where a PPHC enhancement of 3.1 dB at high pressures is achieved as compared to the benchmark prototype.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Peak Power Handling Capability in Groove Gap Waveguide Filters Based on Horizontally Polarized Resonators and Enhancement Solutions

  • Morales-Hernández, Aitor
  • Sánchez-Soriano, Miguel Ángel
  • Ferrando-Rocher, Miguel
  • Marini, Stephan
  • Taroncher Calduch, Máriam
  • Boria Esbert, Vicente Enrique
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
This letter studies the peak power handling capability (PPHC) in groove gap waveguide filters based on horizontally polarized resonators. Moreover, a modification of the resonant cavity is proposed, where the central pins of the original structure are replaced by a rounded metal block. As a result of this change, the TE₁₀₁-like mode can still be excited, but the maximum electric field strength is shifted to the center of the cavity, which leads to a higher PPHC. The main advantages of the original structure are maintained, and greater robustness in the manufacturing process is achieved. Next, some guidelines for the design of the coupling windows and the dimensions of the blocks are shown to minimize the electric field strength and, consequently, maximize the PPHC. Finally, two third-order bandpass filters (with pins and with blocks) centered at 16 GHz have been manufactured and tested in a measurement campaign, where a PPHC enhancement of 8.7 dB at high pressures is achieved for the novel solution presented in this work.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Multimode Equivalent Networks for Shielded Microwave Circuits With Thick Metallizations

  • Gómez Molina, Celia
  • Quesada Pereira, Fernando
  • Marini, Stephan
  • Álvarez Melcón, Alejandro
  • Boria Esbert, Vicente Enrique
  • Guglielmi, Marco
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
In this article, we show how the multimode equivalent network (MEN) technique can be extended to the analysis of multilayer boxed planar microwave circuits that are built using a thick metallization. This analysis is carried out considering the thick metallic circuit as a length of the uniform waveguide. The problem is then divided into two waveguide steps (or junctions). We first obtain the equivalent network of the two junctions. Then, we cascade them to obtain the MEN of the complete circuit, thereby including the effect of finite thickness rigorously. A key aspect of the formulation that we propose is that it includes ports in the transverse plane of the circuit. In addition to theory, several shielded microwave filters using a thick metallization are also analyzed. An in-depth study of the numerical convergence is also performed for two practical examples. Simulation results are shown to be in good agreement with both commercial simulation tools and measurements, thereby fully validating our theoretical formulation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

In-depth Study of the Corona Discharge Breakdown Thresholds in Groove Gap Waveguides and Enhancement Strategies for Inductive Bandpass Filters

  • Morales-Hernández, Aitor
  • Sánchez-Soriano, Miguel Ángel
  • Ferrando-Rocher, Miguel
  • Marini, Stephan
  • Boria Esbert, Vicente Enrique
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
This work focuses on the study of the corona discharge breakdown in groove gap waveguides (GGWs) and inductive bandpass filters (BPFs) based on this technology. With the main aim of improving the peak power handling capability (PPHC), the location of the maximum normalized electric field strength (|Ê MAX |) as a function of the geometrical parameters is analyzed. First, the research deals with wave-guiding structures, comparing the distribution of the transverse electric TE10-like mode of a GGW to that of an equivalent rectangular waveguide (RW). Next, a design strategy based on the adjustment of the geometrical dimensions of the bed of nails is proposed, thus achieving a considerable reduction of |Ê MAX |. The second part of this paper aims for vertically polarized GGW BPFs, where the inductive irises become the most critical part of the component. By a simple modification of their dimensions, a second design criterion is suggested for improving the PPHC. Finally, several Ku-band BPFs centered at 14 GHz and 16 GHz have been manufactured and experimentally verified at the European High-Power Radiofrequency Space Laboratory. This measurement campaign shows peak power thresholds up to 1.09 kW and 3.59 kW at 600 mbar for the non- and full-optimized GGW BPFs, respectively, thereby demonstrating a PPHC enhancement up to 5.16 dB in the high-pressure range when both strategies, proposed in this work, are used.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Additive manufacturing and metallization of high-frequency communication devices

  • Bachiller, Carmen
  • Nova, Vicente
  • Ferrer, Álvaro
  • Martínez, Asunción
  • Sandoval, Nacho
  • Marín, María Luisa
  • Ponce-González, Luis N.
Additive manufacturing (AM) can be applied to new scenarios where traditional subtractive techniques limit geometry and assembling freedom. One of these scenarios is the development of high-frequency devices for communication systems, where AM offers the capability to develop high-complexity geometries, reducing the devices’ weight and cost. This is extraordinarily convenient for recent small satellites where size, weight, and integration are vital. This work presents an AM process specially optimized to develop communication devices. Industry needs have been studied, and materials and manufacturing techniques have been chosen accordingly. Two communication devices, a band-pass filter and a horn antenna, have been developed using two VAT photopolymerization (VPP) processes and different resins. Printed devices were metallized using a two-step process based on a first electroless metallisation and a final galvanic plating. The manufactured pieces were sandblasted prior to metallization to increase plating adhesion and reduce surface roughness. Finally, several dimensional analyses were performed to evaluate the effect of finishing and plating on the manufacturing process using scanning electron microscopy, profilometry, and contact metrology. The electromagnetic response of developed devices is excellent and comparable with commercial devices manufactured with subtractive techniques. A preliminary tolerance analysis was carried out to approximate the systematic deviation of the overall manufacturing process, considering the erosion of sandblasting and the thickness of copper plating. These deviations were compensated in the design step to improve the dimensional accuracy of the band-pass filter., This work was supported by the Agencia Valenciana de la Innovación research project INNVA1/2020/84, by the Agencia Estatal de Investigación (Spain) under the Fellowship for Training PhDs BES-2017-079728, and by the Ministerio de Ciencia e Innovación (MICIN, Spanish Government) through the Research and Development projectPID2019-103982RB-C41 (under Grant MICIN/AEI/10. 13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterization of nematic liquid crystals at microwave frequencies

  • Nova, Vicente
  • Bachiller, Carmen
  • Villacampa, Belén
  • Kronberger, Rainer
  • Boria, Vicente E.
This article belongs to the Special Issue Nematic Liquid Crystals., The use of nematic liquid crystal (LC) mixtures for microwave frequency applications presents a fundamental drawback: many of these mixtures have not been properly characterized at these frequencies, and researchers do not have an a priori clear idea of which behavior they can expect. This work is focused on developing a new procedure for the extraction of the main parameters of a nematic liquid crystal: dielectric permittivity and loss tangent at 11 GHz under different polarization voltages; splay elastic constant 𝐾11 , which allows calculation of the threshold voltage (𝑉𝑡ℎ ); and rotational viscosity 𝛾11 , which allows calculating the response time of any arbitrary device. These properties will be calculated by using a resonator-based method, which is implemented with a new topology of substrate integrated transmission line. The LC molecules should be rotated (polarized) by applying an electric field in order to extract the characteristic parameters; thus, the transmission line needs to have two conductors and low electric losses in order to preserve the integrity of the measurements. This method was applied to a well-known liquid crystal mixture (GT3-23002 from MERCK) obtaining the permittivity and loss tangent versus bias voltage curves, the splay elastic constant, and the rotational viscosity of the mixture. The results validate the viability of the proposed method., This work was partially funded by the Generalitat Valenciana research project PROMETEO/2019/120, by Agencia Estatal de Investigación (Spain) under the Fellowship for Training PhDs BES-2017-079728, by Ministerio de Ciencia e Innovación, Spanish Government, under Project PID2019-103982RB-C41, and by Gobierno de Aragón (Ref.:E47_20R)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Characterization of nematic liquid crystals at microwave frequencies

  • Nova, V.
  • Bachiller, C.
  • Villacampa, B.
  • Kronberger, R.
  • Boria, V.E.
The use of nematic liquid crystal (LC) mixtures for microwave frequency applications presents a fundamental drawback: many of these mixtures have not been properly characterized at these frequencies, and researchers do not have an a priori clear idea of which behavior they can expect. This work is focused on developing a new procedure for the extraction of the main parameters of a nematic liquid crystal: dielectric permittivity and loss tangent at 11 GHz under different polarization voltages; splay elastic constant K11, which allows calculation of the threshold voltage (Vth); and rotational viscosity ¿11, which allows calculating the response time of any arbitrary device. These properties will be calculated by using a resonator-based method, which is implemented with a new topology of substrate integrated transmission line. The LC molecules should be rotated (polarized) by applying an electric field in order to extract the characteristic parameters; thus, the transmission line needs to have two conductors and low electric losses in order to preserve the integrity of the measurements. This method was applied to a well-known liquid crystal mixture (GT3-23002 from MERCK) obtaining the permittivity and loss tangent versus bias voltage curves, the splay elastic constant, and the rotational viscosity of the mixture. The results validate the viability of the proposed method.
Repositorio Digital UPCT
Publication Artículo científico (JournalArticle)

Integral equation analysis of multiport H‐plane microwave circuits by using 2D rectangular cavity Green's functions accelerated by the Ewald Method

  • Quesada Pereira, Fernando Daniel
  • Huéscar de la Cruz, Antonio Manuel
  • Gómez Molina, Celia
  • Melcón Álvarez, Alejandro
  • Boria Esbert, Vicente Enrique
An integral equation technique for the analysis of multiport H‐plane microwave circuits composed of an unlimited number of arbitrarily shaped metallic and/or dielectric elements is proposed. The structure under study is divided into different regions after the application of the surface equivalence principle. Following this approach, the access waveguide ports are modelled by means of parallel plate Green's functions, whereas the central region is characterised by 2D rectangular cavity Green's functions. The use of this kind of Green's functions represents a novelty for solving H‐plane integral equation problems. For the first time, the Ewald method has been employed in order to accelerate the computation of the 2D rectangular cavity Green's functions and their derivatives, needed in the integral equation. In addition, convergence studies show the numerical convenience of using the Ewald method to achieve a fast and accurate evaluation of these Green's functions. Results show that the analysis can be very efficient if the structure is segmented in a proper way based on fitting the cavity resonator within the geometry of the structure under analysis. In fact, all the walls of the structure that are coincident with the auxiliary resonator need not to be discretised during the numerical solution. Finally, several simulation examples of practical inductive microwave circuits are presented and discussed, showing a good agreement and higher computational efficiency when compared to results provided by commercial full‐wave software tools and measurements., This research work has been financially supported by the Spanish Ministerio de Ciencia e Innovación (Grant number MCIN/AEI/10.13039/501100011033) in the frame of the cooperative projects “Green an Efficient Technologies for Advanced Telecommunication Systems (GRETAS)” with Ref. TPID2019‐103982RB‐C42 and “Advanced Design of New High Frequency Components in Compact Waveguide Technologies for Future Telecommunication Satellites (GUIDESAT)” (Ref. TPID2019‐103982RB‐C41).
Repositorio Digital UPCT
Publication Artículo científico (JournalArticle)

Multimode Equivalent Networks for Shielded Microwave Circuits With Thick Metallizations

  • Gómez Molina, Celia
  • Quesada Pereira, Fernando Daniel
  • Marini, Stephan
  • Melcón Álvarez, Alejandro
  • Boria Esbert, Vicente Enrique
  • Guglielmi, Marco
In this article, we show how the multimode equivalent network (MEN) technique can be extended to the analysis of multilayer boxed planar microwave circuits that are built using a thick metallization. This analysis is carried out considering the thick metallic circuit as a length of the uniform waveguide. The problem is then divided into two waveguide steps (or junctions). We first obtain the equivalent network of the two junctions. Then, we cascade them to obtain the MEN of the complete circuit, thereby including the effect of finite thickness rigorously. A key aspect of the formulation that we propose is that it includes ports in the transverse plane of the circuit. In addition to theory, several shielded microwave filters using a thick metallization are also analyzed. An in-depth study of the numerical convergence is also performed for two practical examples. Simulation results are shown to be in good agreement with both commercial simulation tools and measurements, thereby fully validating our theoretical formulation., This work was supported in part by the Ministerio de Educación, Cultura y Deporte, Spanish Government, under Grant FPU15/02883; and in part by the Ministerio de Ciencia e Innovación through the sub-projects C41, C42 and C43 of the coordinated project under Grant PID2019-103982RB