Skip to main content

DISPOSITIVOS NANOFOTONICOS EXTREMADAMENTE SENSIBLES PARA APLICACIONES BIOQUIMICAS

PID2019-106231RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 35
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Beyond near-infrared lossy mode resonances with fluoride glass optical fiber

  • Vitoria Pascual, Ignacio
  • Ruiz Zamarreño, Carlos
  • Ozcariz Celaya, Aritz
  • Imas González, José Javier
  • Matías Maestro, Ignacio
The objective of this Letter consists of the exploration of the lossy mode resonance (LMR) phenomenon beyond the nearinfrared region and specifically in the short wave infrared region (SWIR) and medium wave infrared region (MWIR). The experimental and theoretical results show for the first time, to the best of our knowledge, not only LMRs in these regions, but also the utilization of fluoride glass optical fiber associated with this phenomenon. The fabricated devices consist of a nanometric thin-film of titanium dioxide used as LMR generating material, which probed extraordinary sensitivities to external refractive index (RI) variations. RI sensitivity was studied in the SWIR and MWIR under different conditions, such as the LMR wavelength range or the order of resonance, showing a tremendous potential for the detection of minute concentrations of gaseous or biological compounds in different media., Ministerio de Ciencia, Innovación y Universidades (FPU18/03087); Agencia Estatal de Investigación (PID2019-106231RB-I00 TEC); Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

HMR-based optical gas detection with CuO and ZnO coatings

  • Gallego Martínez, Elieser Ernesto
  • Ruiz Zamarreño, Carlos
  • Matías Maestro, Ignacio
This work presents the fabrication of hyperbolic mode resonance-based optical sensors by means of sputtered copper oxide (CuO) and zinc oxide (ZnO), and the study of their performance for gas sensing purposes. Two sensors were fabricated in a planar waveguide configuration with an intermediate gold thin film, and resonances were observed in the visible region of the electromagnetic spectrum. Both materials were analyzed with X-ray diffraction techniques, and their response was characterized by different concentrations of a group of gases comprised of nitric oxide, acetylene (C2H2), ethanol, carbon dioxide, and relative humidity. The best performance corresponds to the CuO sensor for C2H2 gas, presenting a sensitivity of 1.11 nm/parts per million (ppm) and a limit of detection of 12.6 ppb, with response and recovery times of 70 and 68 s, respectively. ZnO-based sensors allowed for a comprehensive study of ethanol in a range of thousands of ppm, while CuO-based sensors showed exceptional sensitivity for most gases in the range of a few ppm. All measurements were performed at room temperature., This work was supported in part by the Agencia Estatal de Investigación under Grant PID2019-106231RB-I00 and Grant PDC2023-145831-I00 and in part by the Institute Smart Cities of the Public University of Navarra Ph.D. Student Grants.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Enhancement of lossy mode resonance sensing properties by the introduction of an intermediate low-refractive-index layer

  • Armas, Dayron
  • Kwietniewski, Norbert
  • Matías Maestro, Ignacio
  • Burnat, Dariusz
  • Smietana, Mateusz
  • Del Villar, Ignacio
Devices based on the lossy mode resonance (LMR) effect have found numerous sensing applications. Herein, the enhancement of the sensing properties by the introduction of an intermediate layer between the substrate and the LMR-supporting film is discussed. Experimental results for a silicon oxide (SiO2) layer of tuned thickness between a glass slide substrate and a thin film of titanium oxide (TiO2) prove the possibility of significantly increasing the LMR depth and the figure of merit (FoM) for refractive index sensing applications, which is supported by a numerical analysis using the plane wave method for a one-dimensional multilayer waveguide. The application of the intermediate layer allows the introduction of a new, to the best of our knowledge, degree of freedom into the design of LMR-based sensors, resulting in improved performance for demanding fields such as chemical sensing or biosensing., Agencia Estatal de Investigación (PID2019-106231RB-100); Universidad Pública de Navarra; Narodowe Centrum Badań i Rozwoju (TECHMATSTRATEG-III/0042/2019).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Optimization of fiber Bragg gratings inscribed in thin films deposited on D-shaped optical fibers

  • Imas González, José Javier
  • Ruiz Zamarreño, Carlos
  • Del Villar, Ignacio
  • Matías Maestro, Ignacio
A fiber Bragg grating patterned on a SnO2 thin film deposited on the flat surface of a D-shaped polished optical fiber is studied in this work. The fabrication parameters of this structure were optimized to achieve a trade-off among reflected power, full width half maximum (FWHM), sensitivity to the surrounding refractive index (SRI), and figure of merit (FOM). In the first place, the influence of the thin film thickness, the cladding thickness between the core and the flat surface of the D-shaped fiber (neck), and the length of the D-shaped zone over the reflected power and the FWHM were assessed. Reflected peak powers in the range from −2 dB to −10 dB can be easily achieved with FWHM below 100 pm. In the second place, the sensitivity to the SRI, the FWHM, and the FOM were analyzed for variations of the SRI in the 1.33–1.4 range, the neck, and the thin-film thickness. The best sensitivities theoretically achieved for this device are next to 40 nm/RIU, while the best FOM has a value of 114 RIU−1., This work has been supported by the Spanish Ministry of Universities through the FPU18/03087 grant (Formación de Profesorado Universitario) and the Spanish Ministry of Science and Innovation PID2019-106231RB-I00 TEC Research fund.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Direct functionalization of TiO2/PSS sensing layer for an LMR-based optical fiber reusable biosensor

  • Santano Rivero, Desiree
  • Socorro Leránoz, Abián Bentor
  • Del Villar, Ignacio
Functionalization plays a crucial role in the development of biosensors. In this study, bioreceptors were directly immobilized onto the surface of a sensing layer after physical activation, avoiding the need for longer and more complex functionalization systems. This direct immobilization was applied to an optical sensing platform based on lossy mode resonances (LMRs) generated by a thin-film of titanium (IV) dioxide/poly(sodium 4-styrenesulfonate) (TiO 2 /PSS). To generate the LMR, a 200-micron bare optical fiber was coated with TiO 2 /PSS using the layer-by-layer self-assembly technique. The PSS of the sensing layer was then physically activated using either UV-ozone or plasma to immobilize anti-rabbit IgG bioreceptors. This enabled specific and label-free detection of rabbit IgG concentrations ranging from 0.002 to 2 mg/ml. The results presented in this work include real-time detection of rabbit IgG, a comparison between the two activation techniques (UV-ozone and plasma), and an analysis of the biosensor’s reusability over four consecutive cycles, which demonstrates the promising potential of the TiO 2 /PSS sensing layer for biosensing applications., This work was supported in part by the Spanish Agencia Estatal de Investigación (AEI) under Grant PID2019-106231RB-I00, in part by the Public University of Navarra under Grant PJUPNA2033 and in part by a Ph.D Grant by the Public University of Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Mode transitions and thickness measurements during deposition of nanoscale TiO2 coatings on tilted fiber Bragg gratings

  • Imas González, José Javier
  • Albert, Jacques
  • Del Villar, Ignacio
  • Ozcariz Celaya, Aritz
  • Ruiz Zamarreño, Carlos
  • Matías Maestro, Ignacio
The mode transition is a phenomenon observed in thin film coated long period fiber gratings (LPGs) and singlemode multimode single-mode (SMS) fibers for certain values of the coating thickness and refractive index, resulting in increased sensitivity for sensing applications. It is shown here that mode transitions occur simultaneously for a large number of mode resonances in the transmission spectra of tilted fiber Bragg gratings (TFBG) measured during the deposition of ~350nm thick TiO2 coatings by Atomic Layer Deposition (ALD). In TFBGs, the mode transition shows up as an acceleration of the resonance wavelength shift vs thickness, but without fading of the resonance amplitude. Furthermore, the results show that the mode transition for cladding modes with predominantly “TE” polarization at the cladding boundary is significantly sharper than that of predominantly “TM” polarized modes and that it occurs at a smaller coating thickness (<100 nm vs >200 nm). Finally, using a separately determined coating refractive index (2.14, by ellipsometry on witness flats deposited simultaneously) and simulations of the resonance shifts of the TFBG with coating thickness, it is demonstrated that a TFBG connected to a spectral interrogation system can be used to measure the growth of a coating on the surface of the fiber in real time., This work was supported in part by the Spanish Ministry, Formación de Profesorado Universitario under Grant FPU18/03087, in part by the Spanish Ministry of Science and Innovation through TEC Research fund under Grant PID2019-106231RB-I00, and in part by NSERC under Grant RGPIN-2019- 06255.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Twin lossy mode resonance on a single D-shaped optical fiber

  • Imas González, José Javier
  • Ruiz Zamarreño, Carlos
  • Del Villar, Ignacio
  • Pérez Escudero, José Manuel
  • Matías Maestro, Ignacio
This letter presents the fabrication of dual lossy mode resonance (LMR) refractometers based on titanium dioxide (TiO2) and tin oxide (SnO2) thin films deposited on a single side-polished D-shaped optical fiber. For the first time, to the best of our knowledge, two independent LMRs are obtained in the same D-shaped optical fiber, by using a step-shaped nanostructure consisting of a first section of TiO2 with a thickness of 120 nm and a second section with a thickness of 140 nm (120 nm of TiO2 and 20 nm of SnO2). Each section is responsible for generating a first-order LMR with TM-polarized light (LMRTM). TiO2 is deposited by atomic layer deposition and SnO2 by electron-beam deposition. The theoretical results show that the depth of each of the resonances of the dual LMR depends on the length of the corresponding section. Two experimental devices were fabricated with sections of different lengths, and their sensitivities were studied, achieving values ∼ 4000 nm/refractive index unit (RIU) with a maximum of 4506 nm/RIU for values of the SRI between 1.3327 and 1.3485., Ministerio de Ciencia, Innovación y Universidades (FPU18/03087); Agencia Estatal de Investigación (PID2019-106231RB-I00).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Highly sensitive sensor for measuring material thermal expansion using a ring laser

  • Díaz Lucas, Silvia
  • Fuentes Lorenzo, Omar
  • Torres Betancourt, Angie Tatiana
  • Corres Sanz, Jesús María
  • Matías Maestro, Ignacio
A new thermal expansion sensor is presented in this letter. It combines an interferometric fiber sensor and an erbium-doped fiber ring laser as the light source. The sensor consists of a combination of single-mode, hollow-core, and no-core mirror fibers. The sensor was tested on two different types of based metal, such as aluminum and steel, giving sensitivities as high as 38.7 and 5.75 nm/°C, respectively, showing good performance., This work was supported by the National Research Agency through Spanish project under Grant PID2019-106231RB-I00.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Spectral measurements with hybrid LMR and SAW platform for dual parameter sensing

  • Domínguez Rodríguez, Ismel
  • Del Villar, Ignacio
  • Corres Sanz, Jesús María
  • Lachaud, Jean-Luc
  • Yang, Yang
  • Hallil, Hamida
  • Dejous, Corinne
  • Matías Maestro, Ignacio
Lossy mode resonance (LMR)-based optical sensors change their wavelength upon contact with substances or gases. This allows developing applications to detect the refractive index of the surrounding medium and even the thickness of the biolayers deposited on the waveguide. In the same way, when acoustic sensors are in contact with a liquid, it is possible to determine parameters, especially mechanical ones such as shape of the particle or molecule, mass load, elastic constants and viscosity of the liquid. This work reports the development of a system that combines LMR with surface acoustic wave (SAW) technologies to characterize a liquid in terms of its refractive index and viscosity simultaneously. Conveniently prepared glucose solutions are used for sensor calibration. The refractive index of the solutions ranges from 1.33 to 1.41 and its viscosity ranges from 1.005 mPa·s to 9 mPa·s, respectively. A sensitivity of 332 nm per RIU has been achieved with the optical sensor while the acoustic sensor has shown a sensitivity of −1.5 dB/(mPa·s). This new combinational concept could be expanded to the development of more demanding applications such as chemical sensors or biosensors., The authors would like to acknowledge the partial support to the Spanish Ministry of Economy and Competitiveness PID2019-106070RB-I00 and PID2019-106231RB-I00 research funds and the pre-doctoral research grant of the Public University of Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Ultrahigh sensitive detection of tau protein as Alzheimer's biomarker via microfluidics and nanofunctionalized optical fiber sensors

  • Chiavaioli, Francesco
  • Santano Rivero, Desiree
  • Del Villar, Ignacio
  • Socorro Leránoz, Abián Bentor
  • Zhang, Xuejun
  • Li, Kaiwei
  • Santamaría Martínez, Enrique
  • Fernández Irigoyen, Joaquín
  • Baldini, Francesco
  • Van den Hove, Daniel L. A.
  • Shi, Lei
  • Bi, Wei
  • Guo, Tuan
  • Giannetti, Ambra
  • Matías Maestro, Ignacio
Alzheimer’s disease (AD) is one of the most common neurodegenerative illnesses displaying the highest death rate in the elderly. However, the existing AD diagnostic system remains elusive due to lack of a technology that may ensure enough sensitivity and reproducibility, detection accuracy, and specificity. Herein, a straightforward approach is reported to realize lab-on-fiber (LoF) technology for AD biomarker detection based on a D-shaped single-mode fiber combined with nanometer-scale metal-oxide film. The proposed sensing system, which permits the generation of lossy-mode resonance (LMR), remarkably increases the evanescent field of light guided through the fiber, and hence the fiber-surrounding medium interaction. Moreover, such optical sensors are highly repeatable in results and can safely be embedded into a compact and stable microfluidic system. Herein, the specific detection of Tau protein (as one of the classical AD biomarkers that is highly correlated with AD progression) in a complex biofluid with a detection limit of 10 12 M and over a wide concentration range (10 3 –10 μg mL 1 ) is successfully demonstrated. The proposed LoF biosensor is an appealing solution for rapid, sub-microliter dose and highly sensitive detection of analytes at low concentrations, hereby having the potential toward early screening and personalized medicine in AD., F.C. gratefully acknowledges the support of the National Research Council of Italy (CNR) for the Short-Term Mobility programs 2017 and 2019. I.D.V. and I.R.M. acknowledge partial support of the Spanish Ministry of Economy and Competitiveness (Nos.TEC2016-79367-C2-2-R and PID2019-106231RB-I00), the predoctoral research grants of the Public University of Navarra and the Public University of Navarra grant PJUpna1936. E.S. and J.F-I. acknowledge partial support of the Spanish Ministry of Science, Innovation and Universities (PID2019-110356RB-I00/AEI/10.13039/501100011033). T.G.gratefully acknowledges the support of the National Natural Science Foundation of China (Nos. 62035006, 61975068, and 62011530459), the Guangdong Outstanding Scientific Innovation Foundation (No.2019TX05X383), and the Program of Marine Economy Development Special Fund (Six Marine Industries) under Department of Natural Resources of Guangdong Province (No. GDNRC [2021]33).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Monitoring of water freeze-thaw cycle by means of an etched single-mode - multimode - single-mode fiber-optic refractometer

  • Socorro Leránoz, Abián Bentor
  • Aginaga Etxamendi, Concepción Isabel
  • Díaz Lucas, Silvia
  • Urrutia Azcona, Aitor
  • Del Villar, Ignacio
  • Matías Maestro, Ignacio
As an alternative to the different technologies that permit the detection of in-situ ice formation on different surfaces, this contribution proposes the design of an etched single-mode – multimode – single-mode (E-SMS) fiber-optic-based structure as a multimode interference refractometer. This sensor provides enhanced properties with respect to a basic SMS structure, including a higher sensitivity and periodical interferometry bands that can measure surrounding refractive indices with repeatability and robustness. Since ice and water refractive indices are sufficiently different, this structure has been used to detect the freezing - thawing process of water taking place inside a freezer between -20°C and +20°C. Also, this work intends to show a proof of concept of a simple technology that can be applied in different situations, such as in smart cities, avionics, structural health monitoring or even to avoid a cold chain breakage. Inside, novel developments to better understand the working operation of the E-SMS structure are shown, together with a study on how to correlate optical and thermal measurements from a refractive index point of view., This work was supported by the Spanish National Research Agency project with reference PID2019-106231RB-I00. Also, part of the funding was provided by the European Union's Horizon 2020 Research and Innovation Programme (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Grant 774094. (Corresponding author: Abián B. Socorro-Leránoz).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Lossy mode resonance and hyperbolic mode resonance-based optical sensors by means of Y3Fe5O12 and SrTiO3 films deposition on planar substrates

  • Correa Fernández, Ángel
  • Gallego Martínez, Elieser Ernesto
  • Ruiz Zamarreño, Carlos
  • Matías Maestro, Ignacio
This letter describes the fabrication of sensor devices based on lossy mode resonance (LMR) and hyperbolic mode resonance (HMR) using for the first time as generating materials of the optical resonances both, yttrium iron garnet (Y3Fe5O12) and strontium titanate (SrTiO3) with a film thickness of 739.2 and 158.7 nm for Y3Fe5O12 (YIG) and SrTiO3, respectively. First-order resonances were observed at the visible region of the electromagnetic spectrum for both materials, LMR and HMR phenomena. RF sputtering deposition was used to fabricate metal oxide thin films on coverslips in a planar waveguide configuration, the Au metallic thin films were deposited by pulsed dc sputtering in a magnetron system from Moorfield. All devices were characterized under different surrounding medium refractive index. Sensitivities achieved values of 5862 and 5865 nm/RIU (refractive index unit) for HMR versions of Y3Fe5O12 and SrTiO3r, respectively. In addition, the response of the sensors to relative humidity and different ethanol concentrations was evaluated. The best results correspond to the Y3Fe3O3-based sensor, with a sensitivity of 0.2 nm/ppm and a limit of detection (LOD) of 183 ppm for ethanol, and 64 nm/%RH for RH, with an LOD of 2.23%RH, and because its resonance does not vanish unlike SrTiO3., This work was supported in part by the Agencia Estatal de Investigación research projects under Grant PID2019-106231RB-I00 and Grant PDC2023-145831-I00 and in part by the Institute Smart Cities of the Public University of Navarra Ph.D. student grants. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Surface exciton polariton resonances (SEPR)-based sensors

  • Vitoria Pascual, Ignacio
  • Ruiz Zamarreño, Carlos
  • Ozcariz Celaya, Aritz
  • Imas González, José Javier
  • Del Villar, Ignacio
  • Matías Maestro, Ignacio
A new type of resonance in the development of sensors using long-range surface exciton polariton (LRSEP) phenomena has been coined: surface exciton plasmon resonance (SEPR). The resonance was obtained in the reflected spectrum of a Kretschmann-Raether setup with a two-coupled-interface structure composed of 412 nm magnesium fluoride and 50 nm chromium thin films. The roles of different parameters such as thicknesses of the films and the incidence angles have been simulated. Some preliminary experimental results show a promising performance with a shift of the resonance central wavelength with changes in the incidence angle of -136.52 nm/° and a sensitivity of 23,221 nm/refractive index unit., This research was funded by Agencia Estatal de Investigacion (PID2019-106231RB-I00, the Institute of Smart Cities PhD Students grantes, the Ministry of Science, Innovation and Universities of Spain (FPU18/03087) and Margarita Salas-UPNA program (funded by the European Union-NextGenerationEU).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Lossy mode resonance-based sensors in planar configuration: a review

  • Matías Maestro, Ignacio
  • Del Villar, Ignacio
  • Corres Sanz, Jesús María
Lossy mode resonance (LMR)-based sensors have attracted much interest during the last decade in the domain of optical fiber (OF). Here, it is shown that the progress made in the transfer of this technology to planar waveguides (PWs) with different sensing applications such as environmental sensors and biosensors. In addition, the inherent advantages in terms of robustness, simplicity, and easiness to generate novel complex structures are discussed., This work was supported in part by the Agencia Estatal de Investigación under Grant PID2019-106231RBI00 Research Fund and in part by the STARDUST Project (European Commission) under Grant H2020.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

UV light detection with side polished CYTOP fiber

  • Ayechu Abendaño, Ada
  • Santano Rivero, Desiree
  • López Vargas, Juan David
  • Matías Maestro, Ignacio
  • Del Villar, Ignacio
Cyclic transparent optical polymer (CYTOP) fiber, used mainly in strain detection and refractive index characterization of liquids, can be polished for the detection of ultraviolet (UV) light radiation. The study investigates the transmission spectra of CYTOP fiber exposed to different intensities of UV light, demonstrating a linear relationship. A simplified system using a single wavelength, i.e., 395 nm, shows real-time performance of the sensor in a range from 1 to 15 mW. The results reveal the potential of CYTOP fiber as a UV sensor with a sensitivity of 0.65%/mW and a limit of detection of 0.3 mW, offering implications for monitoring UV radiation exposure and related health risks. In addition, the effect of the UV light was also observed at longer wavelengths with a lower intensity variation, which suggests that CYTOP fiber could be used for transmitting the UV radiation detection in telecommunications bands., This work was supported by the Spanish Agencia Estatal de Investigación (AEI) through Project PID2019-106231RB-I00. The work of Desiree Santano was supported by the Public University of Navarre through a predoctoral research grant. The work of Juan David López-Vargas was supported by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - Brasil (CAPES) - Finance Code 001 (“doutorado sanduiche”). Open Access provided by Universidad Pública de Navarra within the CRUI CARE Agreement
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Photonic chip breath analyzer

  • Gallego Martínez, Elieser Ernesto
  • Matías Maestro, Ignacio
  • Ruiz Zamarreño, Carlos
This work introduces a novel single-package optical sensing device for multiple gas sensing, which is suitable for breath analysis applications. It is fabricated on a coverslip substrate via a sputtering technique and uses a planar waveguide configuration with lateral incidence of light. It features three sequentially ordered strips of different materials, which serve to increase the multivariate nature of the response of the device to different gases. For the proof-of-concept, the selected materials are indium tin oxide (ITO), tin oxide (SnO2), and chromium oxide III (Cr2O3), while the selected gases are nitric oxide (NO), acetylene (C2H2), and ammonia (NH3). The sensing mechanism is based on the hyperbolic mode resonance (HMR) effect, with the first-order resonance obtained for each strip located in the near infrared region. The multivariate response of the resonances and the correlation with the concentration of each gas allow training a machine learning (ML) model based on a nonlinear autoregressive neural network, enabling the accurate prediction of the concentration of each gas. The obtained limit of detection for all the gases was in the order of a few parts per billion. This innovative approach coined as the multivariate optical resonances spectroscopy demonstrates the potential of HMR-based optical sensors in combination with ML techniques for ultra-sensitive multi-gas detection applications using a single device., This work was supported by the Agencia Estatal de Investigación research projects, Spain (Grant Nos. PID2019-106231RB-I00 and PDC2023-145831-I00), and by the Institute Smart Cities of the Public University of Navarra Ph.D. student grants, Spain (Grant No. 401).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Tunable sensitivity in long period fiber gratings during mode transition with low refractive index intermediate layer

  • Del Villar, Ignacio
  • Montoya-Cardona, Jorge
  • Imas González, José Javier
  • Reyes-Vera, Erick
  • Ruiz Zamarreño, Carlos
  • Matías Maestro, Ignacio
  • Cruz, José Luis
Double-clad fibers where the second cladding has a lower refractive index than the first cladding, prove to be ideal structures for potentiating and tuning the sensitivity in long-period fiber gratings (LPFGs) operating in mode transition. When a thin film is deposited on the optical fiber, the second cladding performs acts as a barrier that initially prevents the transition to guidance in the thin film of one of the modes guided in the first cladding. Finally, the transition to guidance occurs with a sensitivity increase, in analogy to the tunnel effect observed in semiconductors. This improvement has been demonstrated both as a function of the thin film thickness and the surrounding medium refractive index, with enhancement factors of 4 and 2, respectively. This idea reinforces the performance of LPFGs, adding a new degree of freedom to the mode transition and the dispersion turning point phenomena. Moreover, the control of the variation of the effective index of cladding modes could be applied in other structures, such as tilted-fiber gratings or evanescent wave sensors., We acknowledge the support of the Agencia Estatal de Investigación of Spain (PID2019-106231RB-I00); the Spanish Ministry of Universities (FPU18/03087 grant); European Commission (H2020 - MSCA-RISE-2019-872049); Generalitat Valenciana (IDIFEDER/2020/064,PROMETEO/2019/048), and the Instituto Tecnologico Metropolitano, project P21101.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Lossy mode resonance based microfluidic platform developed on planar waveguide for biosensing applications

  • Benítez Pérez, Melanys
  • Zubiate Orzanco, Pablo
  • Del Villar, Ignacio
  • Socorro Leránoz, Abián Bentor
  • Matías Maestro, Ignacio
The development of resonance phenomena-based optical biosensors has gained relevance in recent years due to the excellent optical fiber properties and progress in the research on materials and techniques that allow resonance generation. However, for lossy mode resonance (LMR)-based sensors, the optical fiber presents disadvantages, such as the need for splicing the sensor head and the complex polarization control. To avoid these issues, planar waveguides such as coverslips are easier to handle, cost-effective, and more robust structures. In this work, a microfluidic LMR-based planar waveguide platform was proposed, and its use for biosensing applications was evaluated by detecting anti-immunoglobulin G (anti-IgG). In order to generate the wavelength resonance, the sensor surface was coated with a titanium dioxide (TiO2) thin-film. IgG antibodies were immobilized by covalent binding, and the detection assay was carried out by injecting anti-IgG in PBS buffer solutions from 5 to 20 μg/mL. The LMR wavelength shifted to higher values when increasing the analyte concentration, which means that the proposed system was able to detect the IgG/anti-IgG binding. The calibration curve was built from the experimental data obtained in three repetitions of the assay. In this way, a prototype of an LMR-based biosensing microfluidic platform developed on planar substrates was obtained for the first time, This research was funded by the Spanish Agencia Estatal de Investigacion (AEI) with reference PID2019-106231RB-I00 and also by the Public University of Navarra, with the project BIOFOCEL (ref. PJUPNA2033) and a pre-doctoral research grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Multichannel refractometer based on lossy mode resonances

  • Fuentes Lorenzo, Omar
  • Corres Sanz, Jesús María
  • Domínguez Rodríguez, Ismel
  • Del Villar, Ignacio
  • Matías Maestro, Ignacio
In this work a new multiparameter sensor platform based on lossy mode resonances is presented. The structure consists of a soda-lime optical slab waveguide butt-coupled to multimode optical fibers. A variable thickness thin-film is deposited to generate multiple independent resonances on the same waveguide, which can be monitored using a single spectrometer. In order to show the potentiality of the structure, a broad resonance was selectively narrowed by etching sections of the LMR producer thin film. The spectral width is progressively reduced, allowing to selectively isolate independent resonances, which opens the path for multiple LMR generation in the same spectra in a multiparameter sensing platform. The experimental results were corroborated with a theoretical analysis based on the finite difference method (FDM). As a proof of concept, two refractometers on the same waveguide were fabricated and tested using PDMS cells. This platform can be easily miniaturized in order to integrate multiple sensors at low cost, what can be of interest for the development of multi-analyte biosensors probes. IEEE, This work was supported in part by the Spanish Ministry of Economy and Competitiveness under Grant PID2019-106070RB-I00 and Grant PID2019-106231RB-I00.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Optical fiber thermo-refractometer

  • Imas González, José Javier
  • Ruiz Zamarreño, Carlos
  • Del Villar, Ignacio
  • Cardozo da Silva, Jean Carlos
  • Oliveira, V.
  • Matías Maestro, Ignacio
This work presents the implementation of a thermo-refractometer, which integrates the measurement of both refractive index and temperature in a single optical fiber structure. To this purpose, a lossy mode resonance (LMR)-based refractometer is obtained by means of the deposition of a titanium dioxide (TiO2) thin film onto a side-polished (D-shaped) single mode fiber. Measurement and subsequent temperature compensation are achieved by means of a fiber Bragg grating (FBG) inscribed in the core of the D-shaped region. The LMR wavelength shift is monitored in transmission while the FBG (FBG peak at 1533 nm) displacement is observed in reflection. The LMR is sensitive to both the surrounding refractive index (SRI), with a sensitivity of 3725.2 nm/RIU in the 1.3324-1.3479 range, and the temperature (- 0.186 nm/°C); while the FBG is only affected by the temperature (32.6 pm/°C in the 25°C - 45°C range). With these values, it is possible to recover the SRI and temperature variations from the wavelength shifts of the LMR and the FBG, constituting a thermo-refractometer, where it is suppressed the effect of the temperature over the refractometer operation, which could cause errors in the fourth or even third decimal of the measured SRI value., Ministerio de Ciencia, Innovación y Universidades (FPU18/03087, PID2019-106231RB-I00 TEC); Universidade Tecnológica Federal do Paraná; Conselho Nacional de Desenvolvimento Científico e Tecnológico.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

All-fiber ellipsometer for nanoscale dielectric coatings

  • Imas González, José Javier
  • Matías Maestro, Ignacio
  • Del Villar, Ignacio
  • Ozcariz Celaya, Aritz
  • Ruiz Zamarreño, Carlos
  • Albert, Jacques
Multiple mode resonance shifts in tilted fiber Bragg gratings (TFBGs) are used to simultaneously measure the thickness and the refractive index of TiO2 thin films formed by Atomic Layer Deposition (ALD) on optical fibers. This is achieved by comparing the experimental wavelength shifts of 8 TFBG resonances during the deposition process with simulated shifts from a range of thicknesses (T) and values of the real part of the refractive index (n). The minimization of an error function computed for each (n, T) pair then provides a solution for the thickness and refractive index of the deposited film and, a posteriori, to verify the deposition rate throughout the process from the time evolution of the wavelength shift data. Validations of the results were carried out with a conventional ellipsometer on flat witness samples deposited simultaneously with the fiber and with scanning electron measurements on cut pieces of the fiber itself. The final values obtained by the TFBG (n = 2.25, final thickness of 185 nm) were both within 4% of the validation measurements. This approach provides a method to measure the formation of nanoscale dielectric coatings on fibers in situ for applications that require precise thicknesses and refractive indices, such as the optical fiber sensor field. Furthermore, the TFBG can also be used as a process monitor for deposition on other substrates for deposition methods that produce uniform coatings on dissimilar shaped substrates, such as ALD., The authors would like to acknowledge the Spanish Ministry of Universities the support of this work through 260 FPU18/03087 grant (Formación de Profesorado Universitario) and the Spanish Ministry of Science and Innovation 261 PID2019-106231RB-I00 TEC Research project, as well as NSERC under Grant RGPIN-2019-06255.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

LMR-based optical sensor for ethylene detection at visible and mid-infrared regions

  • Gallego Martínez, Elieser Ernesto
  • Hualde Otamendi, Mikel
  • Ruiz Zamarreño, Carlos
  • Matías Maestro, Ignacio
Ethylene monitoring has long been a method of controlling the ripening of climacteric fruits, but it turns out that this gas is an important biomarker in biomedical applications. This work presents an optical gas sensor based on the lossy mode resonance (LMR) effect for ethylene detection in planar waveguide configuration. Two different approaches have been explored: one in the visible (VIS) spectral region and the second one in the mid infrared (MIR) region. Optical resonances have been achieved, in all cases, by means of sputtered tin oxide thin films. Response and recovery times were 54 and 246 s, respectively, for the sensor with the resonance in the VIS region, while the device operating in the MIR obtained response and recovery times of 19 and 47 s, respectively. The sensitivity during ethylene detection varied from 93.8 to 187.5 pm/ppm with the devices working in the VIS and MIR regions, respectively. According to the calibration curve, devices show an ethylene limit of detection (LOD) of 4.0058 and 0.6532 ppm in the VIS and MIR spectral regions, respectively, which finds applications in climacteric fruit ripening assessment as well as hemodialysis control. Cross sensitivity with humidity was also characterized for both devices., This work was supported by Agencia Estatal de Investigación under Grant PID2019- 106231RB-I00 and Grant PID2022-137437OB-I00 and in part by the Institute Smart Cities and Public University of Navarra Ph.D. Student grants.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Generation of lossy mode resonances in a broadband range with multilayer coated coverslips optimized for humidity sensing

  • Bohórquez Navarro, Dina Luz
  • Del Villar, Ignacio
  • Corres Sanz, Jesús María
  • Matías Maestro, Ignacio
Coverslips deposited with a metallic oxide can be employed for generating lossy mode resonances by lateral incidence of light on the coverslip. Here it is demonstrated that with copper oxide the fading observed with other materials in the near infrared (NIR) wavelength range is avoided and LMRs can be obtained in a broadband range from 400 to 1700 nm, which permitted to observe the better performance in the NIR region compared to the visible region: the sensitivity to humidity is improved by more than a factor of two. However, copper oxide is not adequate for sensing humidity. The sensitivity of the device was optimized initially with a tin oxide coating and later with an additional layer of agarose, specifically adequate for the detection of humidity. The best performance was obtained with an agarose concentration 1% w/v, which permitted to observe a 10-fold sensitivity increase compared to the same device without agarose. This opens the path towards the development of environmental, chemical or biological sensors with an optimized sensitivity to a specific parameter to detect., The authors would like to acknowledge the support of the Agencia Estatal de Investigación (AEI) del Ministerio de Ciencia, Innovación y Universidades of Spain through the research project PID2019-106231RB-I00 and the predoctoral research grant from the Public University of Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Lossy mode resonance based 1-butanol sensor in the mid-infrared region

  • Gallego Martínez, Elieser Ernesto
  • Matías Maestro, Ignacio
  • Melendi Espina, Sonia
  • Hernáez Sáenz de Zaitigui, Miguel
  • Ruiz Zamarreño, Carlos
The utilization of nanometric Graphene Oxide / Polyethyleneimine (GO/PEI) bilayers deposited onto SnO2-coated CaF2 planar waveguides significantly enhances the sensitivity of Lossy Mode Resonances (LMR) based devices for gas sensing applications. LMR generation in the mid-infrared region, which also contributed to achieve better sensitivities, was accomplished with the aid of fluorinated (CaF2) planar waveguides. LMR wavelength shift was studied as a function of the number of GO/PEI bilayers. In the particular case of 10 bilayers of GO/PEI, the sensitivity of the device to 1-butanol was 70.4 pm/ppm, which increased by a factor of 5 compared to the device without GO/PEI bilayers. The GO/PEI sensor was also sensitive to other alcohols, like 2-propanol, but it showed negligible sensitivity to other gases, such as CO2, NH3 or C2H2. The cross sensitivity with temperature was tested at temperatures of 20, 100 and 180 ºC during water vapor measurement (1723 ppm), showing that the sensor performance was not affected by the temperature fluctuations., This work was supported by Agencia Estatal de Investigación ( PID2019-106231RB-I00 ), Institute Smart Cities and Public University of Navarra Ph.D. Student grants. SM-E would like to express her gratitude for the Fellowship supported by the Royal Academy of Engineering under the Leverhulme Trust Research Fellowships scheme (LTRF2021\17130).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Improving the width of lossy mode resonances (LMRs) in double-clad fibers

  • Imas González, José Javier
  • Del Villar, Ignacio
  • Zubiate Orzanco, Pablo
  • Ruiz Zamarreño, Carlos
  • Matías Maestro, Ignacio
In this work, the characteristics of lossy mode resonances (LMRs) in double-clad fibers where the refractive index (RI) of the second cladding is lower than that of the first cladding are analyzed both numerically and experimentally. In the first place, the LMRs spectra obtained with a 75 nm TiO 2 thin film are simulated, and it is observed that a thicker second cladding improves the width of the resonances, making them narrower. Then, two experimental cases (no second cladding, and second cladding with thickness of 1.13 μm) are assessed, showing a good agreement with the previous simulations. Finally, an experimental refractometric study is carried out in liquids (surrounding medium refractive index in the 1.34 - 1.40 range) for both fibers, calculating the full width at 1 dB (FW 1dB ), the sensitivity, and the figure of merit (FOM). The FW 1dB is better for the LMR obtained on the fiber with second cladding while the sensitivity is slightly greater for the fiber without second cladding. In the case of the FOM, it is higher for the double-clad fiber as the narrowing of the resonances outweighs the lower sensitivity. These results show that the performance of LMR-based optical fiber sensors can be improved by employing double-clad fibers., This work was supported by the Spanish Ministry of Universities, Formación de Profesorado Universitario, under Grant FPU18/03087 and in part by the Spanish Ministry of Science and Innovation through Research Fund under Grant PID2019-106231RB-I00 TEC.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Generation of lossy mode resonances (LMR) using perovskite nanofilms

  • Armas, Dayron
  • Matías Maestro, Ignacio
  • López-González, M. Carmen
  • Ruiz Zamarreño, Carlos
  • Zubiate Orzanco, Pablo
  • Del Villar, Ignacio
  • Romero, Beatriz
The results presented here show for the first time the experimental demonstration of the fabrication of lossy mode resonance (LMR) devices based on perovskite coatings deposited on planar waveguides. Perovskite thin films have been obtained by means of the spin coating technique and their presence was confirmed by ellipsometry, scanning electron microscopy, and X-ray diffraction testing. The LMRs can be generated in a wide wavelength range and the experimental results agree with the theoretical simulations. Overall, this study highlights the potential of perovskite thin films for the development of novel LMR-based devices that can be used for environmental monitoring, industrial sensing, and gas detection, among other applications., The authors would like to acknowledge the partial support to Agencia Estatal de Investigación PID2019-106231RB-I00 research project, Universidad Rey Juan Carlos with research project “Células fotovoltaicas de tercera generación basadas en semiconductores orgánicos avanzados perovskitas híbridas en estructuras multiunión” (reference M2607), and the pre-doctoral research grant of the Public University of Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Simultaneous generation of surface plasmon and lossy mode resonances in the same planar platform

  • Fuentes Lorenzo, Omar
  • Del Villar, Ignacio
  • Domínguez Catena, Iris
  • Corres Sanz, Jesús María
  • Matías Maestro, Ignacio
A planar waveguide consisting of a coverslip for a microscope glass slide was deposited in one of its two faces with two materials: silver and indium tin oxide (ITO). The incidence of light by the edge of the coverslip permitted the generation of both surface plasmon and lossy mode resonances (SPRs and LMRs) in the same transmission spectrum with a single optical source and detector. This proves the ability of this optical platform to be used as a benchmark for comparing different optical phenomena generated by both metal and dielectric materials, which can be used to progress in the assessment of different sensing technologies. Here the SPR and the LMR were compared in terms of sensitivity to refractive index and figure of merit (FoM), at the same time it was demonstrated that both resonances can operate independently when silver and ITO coated regions are surrounded by different refractive index liquids. The results were supported with numerical results that confirm the experimental ones., The authors would like to acknowledge the partial support to the Agencia Estatal de Investigacion (AEI) PID2019-106070RB-I00 and PID2019-106231RB-I00 research funds, and the predoctoral research grants of the Public University of Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Side-polished photonic crystal fiber sensor with ultra-high figure of merit based on Bloch-like surface wave resonance

  • González-Valencia, Esteban
  • Reyes-Vera, Erick
  • Del Villar, Ignacio
  • Torres, Pedro
A Bloch surface wave (BSW) resonance configuration is introduced for biosensing with an ultra-high figure of merit (FOM). The BSW excitation is realized through the evanescent field of the core-guided fundamental mode of a side-polished photonic crystal fiber (PCF). By taking advantage of the air hole periodic microstructure of the PCF cladding, the BSW platform can be achieved with only a single high refractive index dielectric layer on its flat surface. The dielectric layer deposited on the polished surface of the PCF modifies the local effective refractive index, allowing direct manipulation of the BSWs, whereby the resonance wavelength of the surface wave can be adjusted by choosing the material and thickness of this layer. Here, we numerically investigate Bloch-like surface wave (BLSW) resonance conditions around telecom wavelengths for silicon, titanium dioxide, copper monoxide, and aluminum oxide termination layers. The BLSW excitation platform materials have low loss, which results in higher surface field enhancements and narrower resonances, which are advantageous properties for the sensors. The obtained results open new avenues for the application of optical surface waves in biosensing with high FOM. Furthermore, these results show a much higher figure of merit (FOM) than traditional approaches, allowing for increased sensitivity and accuracy., This work is partially funded by the Instituto Tecnológico Metropolitano, project P20212, the Universidad Nacional de Colombia, Facultad de Ciencias de la sede Medellín, (Hermes codes 53395, 56330) and the Spanish National Research Agency (AEI) through the project with reference PID2019-106231RB-I00.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Interdigital concept in photonic sensors based on an array of lossy mode resonances

  • Domínguez Rodríguez, Ismel
  • Del Villar, Ignacio
  • Fuentes Lorenzo, Omar
  • Corres Sanz, Jesús María
  • Matías Maestro, Ignacio
Multi-parameter detection is key in the domain of sensors. Here it is demonstrated that an indium tin oxide (ITO) nanocoating can be used to generate multiple lossy mode resonances (LMRs) in the optical spectrum. To achieve this, a nanocoating with a gradient in thickness is generated on the surface of a planar waveguide, permitting broadening of the LMR because the position of an LMR in the optical spectrum is directly related to the nanocoating thickness. The nanocoating with a gradient in thickness contributes multiple LMRs, each one centred at a different wavelength. With a further etching or deposition using a mask, a pattern of deposited and non-deposited regions can be created, resulting in isolation of the LMRs by preventing LMR overlap. This enables tracking of each central wavelength separately, which can be tuned through control of the gradient or nanocoating pattern. The array of LMR-based sensors is a photonics analogue to the interdigital concept in electronics, enabling multiple resonances to be used for multiparameter sensing., The authors would like to acknowledge the partial support to the Spanish Ministry of Economy and Competitiveness TEC2016-79367-C2-2-R and PID2019-106231RB-I00 research fund, the STARDUST project (European Commission) and the pre-doctoral research grants of the Public University of Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Wavelength and intensity based lossy mode resonance breathing sensor

  • Bohórquez Navarro, Dina Luz
  • Del Villar, Ignacio
  • Corres Sanz, Jesús María
  • Matías Maestro, Ignacio
Copper oxide (CuO) allows the generation of lossy mode resonance (LMR) in a wide wavelength range of the optical spectrum, both in the visible and the near-infrared (NIR). For this, it is necessary to use a configuration based on the lateral incidence of light on the edge of a planar waveguide structure. On the other hand, the use of additional coatings of tin oxide (SnO2) and agarose allows an increase in the sensitivity of the sensor, in response to the breathing monitoring. The sensors were characterized, both in intensity and wavelength. In both cases their behavior depends on the position of the LMR in the optical spectrum. Therefore, it is convenient to extract the design rules that allow an optimal behavior of the sensor. In this sense, sensors located in the NIR presented a better behavior in terms of sensitivity and quality of the signal. In addition, the devices were tested in different conditions: repetitive tests at different distances, oral and nasal breathing, and breathing after doing physical exercise., The authors would to acknowledge the partial support to the Agencia Estatal de Investigacion (AEI) from the Spanish Ministry of Economy and Competitiveness (PID2019-106231RB-I00 and PID2019-106070RB-I00 research funds) and the predoctoral research grant of the Public University of Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Novel sputtered metal oxides (SnO2:F, HfO2, WO3) for high-sensitivity HMR-based optical refractometers

  • Correa Fernández, Ángel
  • Gallego Martínez, Elieser Ernesto
  • Ruiz Zamarreño, Carlos
  • Matías Maestro, Ignacio
Hyperbolic mode resonances (HMR)-based devices, presented as the natural successors of lossy mode resonance-based devices, can provide deep and stable resonances with remarkable sensitivity. However, they are still in its infancy with ample room for the exploration of novel materials that enable the generation of HMR. This work explores the utilization of fluorinated tin oxide (SnO2:F), hafnium dioxide (HfO2), and tungsten trioxide (WO3) as external coatings for HMR generation using a planar waveguide configuration (24 mm x 32 mm coverslips). Basic HMR structure consisted of a combination of DC and RF sputtered coatings of an intermediate Au layer and a metal oxide external layer, respectively. The sensors¿ spectral responses were measured over a refractive index (RI) range spanning from air (¿1.0) to 1.45, covering relevant analytes in gas and liquid sensing. HMR sensors exhibited distinct resonance features that shift systematically with increasing RI, enabling accurate label-free refractometry. The obtained sensitivity, figure of merit, and linearity are compared across the three devices, highlighting the influence of the hyperbolic metamaterial design on the sensing performance. Obtained results demonstrate that HMR-based sensors can provide compact and versatile platforms for RI detection, with enormous potential for integration into lab-on-a-chip systems., This work was supported in part by Agencia Estatal de Investigación under Grant PID2019-106231RB-I00 and Grant PDC2023-145831-I00 research projects and in part by the Institute Smart Cities of the Public University of Navarra Ph.D. student grants.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Advances in fiber optic DNA-based sensors: a review

  • Santano Rivero, Desiree
  • Urrutia Azcona, Aitor
  • Ruiz Zamarreño, Carlos
  • Del Villar, Ignacio
DNA is becoming increasingly important in the domain of optical fiber sensors, either as a tool for biosensing, or as a target to detect. In this review the main contributions of the last years are presented both in the domain of wavelength and intensity based configurations. This review comprises the use of natural single strand DNA (ssDNA) sequences as receptors for the detection of ssDNA sequences through hybridization, synthetic nucleic acids receptors for detection of complementary ssDNA sequences, and sensors based on natural and synthetic ssDNA receptors used for the detection of non-DNA targets. Parameters such as sensitivity, detection range and limit of detection are analyzed and discussed in detail to the purpose of comparing the different technologies and knowing the future lines to follow in the domain of fiber optic DNA-based sensors., This work was supported in part by the Spanish Agencia Estatal de Investigación (AEI) under Grant PID2019-106231RB-I00, in part by the Public University of Navarra under Grant PJUPNA26, in part by the Ph.D. Research Grants, and in part by the ATTRACT Call financed by the European Union’s Horizon 2020 Research and Innovation Program under Grant 777222.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Novel bloch wave excitation platform based on few-layer photonic crystal deposited on D-shaped optical fiber

  • González Valencia, Esteban
  • Del Villar, Ignacio
  • Torres, Pedro
With the goal of ultimate control over the light propagation, photonic crystals currently represent the primary building blocks for novel nanophotonic devices. Bloch surface waves (BSWs) in periodic dielectric multilayer structures with a surface defect is a well-known phenomenon, which implies new opportunities for controlling the light propagation and has many applications in the physical and biological science. However, most of the reported structures based on BSWs require depositing a large number of alternating layers or exploiting a large refractive index (RI) contrast between the materials constituting the multilayer structure, thereby increasing the complexity and costs of manufacturing. The combination of fiber–optic-based platforms with nanotechnology is opening the opportunity for the development of high-performance photonic devices that enhance the light-matter interaction in a strong way compared to other optical platforms. Here, we report a BSW-supporting platform that uses geometrically modified commercial optical fibers such as D-shaped optical fibers, where a few-layer structure is deposited on its flat surface using metal oxides with a moderate difference in RI. In this novel fiber optic platform, BSWs are excited through the evanescent field of the core-guided fundamental mode, which indicates that the structure proposed here can be used as a sensing probe, along with other intrinsic properties of fiber optic sensors, as lightness, multiplexing capacity and easiness of integration in an optical network. As a demonstration, fiber optic BSW excitation is shown to be suitable for measuring RI variations. The designed structure is easy to manufacture and could be adapted to a wide range of applications in the fields of telecommunications, environment, health, and material characterization., Fundación para la Promoción de la Investigación y la Tecnología-Banco de la República of Colombia (Contract 202103); Universidad Nacional de Colombia (Hermes code 46509); Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (TEC2016-78047-R and PID2019-106231RB-I00). E.G.V. acknowledges the support of COLCIENCIAS through the Doctoral Scholarship program.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Trends in the design of intensity-based optical fiber biosensors (2010–2020)

  • Acha Morrás, Nerea de
  • Socorro Leránoz, Abián Bentor
  • Elosúa Aguado, César
  • Matías Maestro, Ignacio
There exists an increasing interest in monitoring low concentrations of biochemical species, as they allow the early-stage detection of illnesses or the monitoring of the environment quality. Thus, both companies and research groups are focused on the development of accurate, fast and highly sensitive biosensors. Optical fiber sensors have been widely employed for these purposes because they provide several advantages for their use in point-of-care and real-time applications. In particular, this review is focused on optical fiber biosensors based on luminescence and absorption. Apart from the key parameters that determine the performance of a sensor (limit of detection, sensibility, cross-sensibility, etc.), other features are analyzed, such as the optical fiber dimensions, the sensing set ups and the fiber functionalization. The aim of this review is to have a comprehensive insight of the different aspects that must be taken into account when working with this kind of sensors., This research was funded by the Spanish AGENCIA ESTATAL DE INVESTIGACIÓN (AEI), through the project with reference PID2019-106231RB-I00—ESPADA and also by the Regional Government of Navarra, through the project with reference 0011-1365-2020-000061–BREATHALYSER (FEDER).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Gas sensor based on lossy mode resonances by means of thin graphene oxide films fabricated onto planar coverslips

  • Vitoria Pascual, Ignacio
  • Gallego Martínez, Elieser Ernesto
  • Melendi Espina, Sonia
  • Hernáez Sáenz de Zaitigui, Miguel
  • Ruiz Zamarreño, Carlos
  • Matías Maestro, Ignacio
The use of planar waveguides has recently shown great success in the field of optical sensors based on the Lossy Mode Resonance (LMR) phenomenon. The properties of Graphene Oxide (GO) have been widely exploited in various sectors of science and technology, with promising results for gas sensing applications. This work combines both, the LMR-based sensing technology on planar waveguides and the use of a GO thin film as a sensitive coating, to monitor ethanol, water, and acetone. Experimental results on the fabrication and performance of the sensor are presented. The obtained results showed a sensitivity of 3.1, 2.0, and 0.6 pm/ppm for ethanol, water, and acetone respectively, with a linearity factor R2 > 0.95 in all cases., This work was supported by Agencia Estatal de Investigación (PID2019-106231RB-I00), Institute of Smart Cities and Public University of Navarra PhD Student grants, and in part by the European Union Horizon 2020 Research and Innovation Programme (Stardust-Holistic and Integrated Urban Model for Smart Cities) under Grant 774094. SM-E would like to express her gratitude for the Fellowship supported by the Royal Academy of Engineering under the Leverhulme Trust Research Fellowships scheme (LTRF2021\17130).