Skip to main content

FILTROS Y COMPONENTES PASIVOS PARA LOS FUTUROS SISTEMAS RADIO INTEGRADOS TERRESTRES Y ESPACIALES DE ONDAS MILIMETRICAS

PID2020-112545RB-C53

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

The Canfranc Axion Detection Experiment (CADEx): search for axions at 90 GHz with Kinetic Inductance Detectors

  • Aja, Beatriz
  • Arguedas Cuendis, Sergio
  • Arregui, Ivan
  • Artal, Eduardo
  • Barreiro, R. Belén
  • Casas, Francisco J.
  • de Ory, Marina C.
  • Díaz-Morcillo, Alejandro
  • de la Fuente, Luisa
  • Gallego, Juan Daniel
  • García-Barceló, Jose María
  • Gimeno, Benito
  • Gomez, Alicia
  • Granados, Daniel
  • Kavanagh, Bradley J.
  • Laso, Miguel A.G.
  • Lopetegi, Txema
  • Lozano-Guerrero, Antonio
  • Magaz, María T.
  • Martín-Pintado, Jesús
  • Martínez-González, Enrique
  • Miralda-Escudé, Jordi
  • Monzó-Cabrera, Juan
  • Najarro de la Parra, Francisco
  • Navarro-Madrid, Jose R.
  • Nuñez Chico, Ana B.
  • Pascual, Juan Pablo
  • Pelegrin, Jorge
  • Peña Garay, Carlos
  • Rodriguez, David
  • Socuéllamos, Juan M.
  • Teberio, Fernando
  • Teniente, Jorge
  • Vielva, Patricio
  • Vila, Iván
  • Vilar, Rocío
  • Villa, Enrique
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The Canfranc Axion Detection Experiment (CADEx): search for axions at 90 GHz with Kinetic Inductance Detectors

  • Aja, Beatriz
  • Arguedas, Sergio
  • Arregui, Ivan
  • Artal, Eduardo
  • Barreiro, R. Belén
  • Casas-Reinares, F. J.
  • Ory, Marina C. de
  • Díaz-Morcillo, Alejandro
  • Fuente, Luisa de la
  • Gallego, Juan Daniel
  • García Barceló, José María
  • Gimeno, Benito
  • Gómez, Alicia
  • Granados, Daniel
  • Kavanagh, Bradley J.
  • Laso, Miguel A.G.
  • Lopetegi, Txema
  • Lozano-Guerrero, Antonio José
  • Magaz, María Teresa
  • Martín-Pintado, Jesús
  • Martínez-González, Enrique
  • Miralda-Escudé, Jordi
  • Monzó-Cabrera, Juan
  • Najarro, Francisco
  • Navarro-Madrid, José R.
  • Núñez Chico, Ana Belén
  • Pascual, Juan Pablo
  • Pelegrin, Jorge
  • Peña-Garay, Carlos
  • Rodríguez González, David
  • Socuéllamos, Juan M.
  • Teberio, Fernando
  • Teniente, Jorge
  • Vielva, Patricio
  • Vila, Iván
  • Vilar Cortabitarte, R.
  • Villa, Enrique
We propose a novel experiment, the Canfranc Axion Detection Experiment (CADEx), to probe dark matter axions with masses in the range 330–460 μeV, within the W-band (80–110 GHz), an unexplored parameter space in the well-motivated dark matter window of Quantum ChromoDynamics (QCD) axions. The experimental design consists of a microwave resonant cavity haloscope in a high static magnetic field coupled to a highly sensitive detecting system based on Kinetic Inductance Detectors via optimized quasi-optics (horns and mirrors). The experiment is in preparation and will be installed in the dilution refrigerator of the Canfranc Underground Laboratory. Sensitivity forecasts for axion detection with CADEx, together with the potential of the experiment to search for dark photons, are presented., SA and JM are supported by grants PID2019-108122GB-C32 and the Maria de Maeztu grant CEX-2019-000918-M of ICCUB. The work of UPCTand IFIC is supported by grant PID2019-108122GB-C33, funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”. JMGB thanks the grant FPI BES-2017-079787, funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”. The work of Universidad de Cantabria is supported by the Ministry of Science and Innovation under Grant PID2019-110610RB-C22. CAB and IMDEA-Nanoscience work is supported by grants PID2019-105552RB-C41 and PID2019-105552RB-C44 and by Comunidad de Madrid under Grant P2018/NMT-4291. IMDEA-Nanoscience acknowledges financial support from “Severo Ochoa” Programme for Centers of Excellence in R&D (MINECO, Grant SEV-2016-0686). D.G. and A.G also acknowledge Grant DEFROST N62909-19-1-2053 from ONR Global. RBB, FJC, BJK, EMG, JMS and PV thank the Spanish Agencia Estatal de Investigación (AEI, MICIU) for the support to the Unidad de Excelencia María de Maeztu Instituto de Física de Cantabria, ref. MDM-2017-0765. RBB, FJC, EMG and PV thank the Spanish Agencia Estatal de Investigación (AEI, MCI) for the funds received through the research project, ref. PID2019-110610RB-C21. RBB, FJC, BJK, EMG, JMS and PV also thank the ‘Dark Collaboration at IFCA’ working group for useful discussions. The work done by ANTERAL S.L. is supported by project QON-Space financed by the Navarra Government Project No. 0011-1365-2021-000220. UPNA acknowledges financial support from the Spanish State Research Agency, Project No. PID2019-109984RB-C43/AEI/10.13039/501100011033 and Project No. PID2020-112545RB-C53/MCIN/AEI/ 10.13039/501100011033., Peer reviewed
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A multi-site ultra-miniaturized circularly polarized triple-band MIMO antenna for high data-rate IoMT applications

  • Shah, Syed Nazim
  • Shah, Syed Ahson Ali
  • Shah, Izaz Ali
  • Nasir, Jamal
  • Gómez Laso, Miguel Ángel
This work proposes a miniaturized, circularly polarized (CP), triple-band, MIMO implantable antenna for wireless capsule endoscopy (WCE) and deep tissue applications in an internet of medical things (IoMT) scenario. The dual-port MIMO antenna has a compact volume of 9.6 × 5 × 0.254 mm3 achieved by using spiral meandered line resonators without relying on shortening vias or ground plane slots. The presented MIMO antenna operates in the Medical Implant Communication Service (MICS) band (402–406 MHz), the Industrial, Scientific, and Medical (ISM) bands (433.05–434.79 MHz, 902–928 MHz), and the midfield band (1315-1371 MHz). The MIMO antenna supports multitask operation, such as high-rate data transmission, control signaling, and wireless power transfer (WPT) simultaneously. A thorough simulation process was adopted to optimize the proposed MIMO antenna by integrating it inside capsule-type and flat-type implantable medical devices (IMDs) and placing it inside various homogeneous and heterogeneous phantoms. The MIMO antenna was fabricated and tested by placing it inside minced pork to evaluate various parameters, which were found to be in close agreement with the simulated ones. The presented MIMO antenna exhibits a measured -10 dB impedance bandwidth of 71 MHz,70 MHz, and 61 MHz and measured peak gains of −47.21, −38.13, and −33.28 dBi at 433, 915, and 1345 MHz, respectively. The proposed antenna is the first to simultaneously achieve miniaturization, circular polarization, and triple-band MIMO operation (402/433, 915, and 1345 MHz) in an ultra-compact form factor. It maintains SAR compliance, provides sufficient link margin at implantation depths, and enables reliable IoMT communication and wireless power transfer., This work was supported in part by the Spanish Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) under Project PID2020-112545RB-C53, and in part by the European Unionás H2020 Research and Innovation Program through Maria Skłodowska-Curie under Grant 101034285.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Integrating multiple stubs in stepped-impedance filter aiming for high selectivity

  • Sami, Abdul
  • Gómez Laso, Miguel Ángel
  • Lopetegui Beregaña, José María
  • Arnedo Gil, Israel
  • Calero Fernández, Ibai
  • Teberio Berdún, Fernando
  • Martín Iglesias, Petronilo
  • Benito Pertusa, David
  • Arregui Padilla, Iván
A design technique to include multiple and fully-controlled transmission zeros (TZs) in the frequency response of rectangular waveguide commensurate-line stepped-impedance filters is presented in this letter. These bandpass filters (BPFs) are known for having reduced sensitivities against manufacturing inaccuracies and are composed of multiple waveguide sections. In order to improve their selectivity, 3λg/4 and λg/4-stubs are included to create multiple TZs around the passband. The proposed technique allows us to add multiple stubs in a single section and, therefore, only minor adjustments in the affected part of the filter are required, which simplifies the overall design process. The technique has been verified with a design example with four TZs (two on each side) near the passband., This work was supported by the Spanish Ministerio de Ciencia e Innovación –Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) under Project PID2020-112545RB-C53 and by the European Union’s Horizon 2020 Research and Innovation Program under Grant 811232-TESLA-H2020-MSCA-ITN-2018.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Assessment of performance of one-turn inductors in series configuration through a transmission-line modeling approach

  • Álvarez Botero, Germán Andrés
  • Moctezuma-Pascual, Eduardo
  • Gómez Laso, Miguel Ángel
  • Torres-Torres, Reydezel
In this paper, transmission-line theory is applied to implement a physical model for compact one-turn inductors, which simultaneously incorporates the frequency-dependent effects introduced by the conductor skin effect and the loss originated by the coupling with the ground plane. For this purpose, S-parameter measurements are processed to extract the associated parameters, which exhibit scalability with the turn radius. This allows the model to be used for interpolation and extrapolation analyses. In this regard, the device performance is assessed for one-turn inductors in series connection, for different load impedances, and when the turn is narrowed. To validate the proposal, agreement between the model and the experimental transmission line RLGC parameters, the return loss, and the Q-factor is obtained up to 20 GHz., The support received by the Spanish Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación (MCIN/AEI/ 10.13039/501100011033) under Project PID2020-112545RB-C53; Consejo Nacional de Humanidades, Ciencias y Tecnologías; 10.13039/501100017266-Gobierno de Navarra (Grant Number: 0011-3947-2022-000006).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Gap waveguide topology with reduced height pins for millimeter-wave components

  • Santiago Arriazu, David
  • Gómez Laso, Miguel Ángel
  • Lopetegui Beregaña, José María
  • Arregui Padilla, Iván
A new topology for groove gap waveguide (GGW) technology is proposed to ease its manufacturing process by computer numerical control (CNC) milling. GGW technology consists of two metal plates, where one of them presents a λ/4 height pin bed that avoids contact with the other plate, making it an ideal alternative to other waveguides for millimeterwave applications. However, the manufacture of the pins by CNC milling may be troublesome due to the large pin height required. A GGW with reduced height pins will be proposed, maintaining the standard dimensions of the equivalent rectangular waveguide ports and the operation bandwidth. The performance of this new topology will be compared with other proposals by means of simulations and measurements, and a bandpass filter will be also implemented and manufactured in this technology to validate its usefulness., This work was funded by the Spanish Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033 under project PID2020-112545RB-C53).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Photonic-assisted 2-D terahertz beam steering enabled by a LWA array monolithically integrated with a BFN

  • Haddad, Thomas
  • Biurrun Quel, Carlos
  • Lu, Peng
  • Tebart, Jonas
  • Sievert, Benedikt
  • Makhlouf, Sumer
  • Grzeslo, Marcel
  • Teniente Vallinas, Jorge
  • Río Bocio, Carlos del
  • Stöhr, Andreas
A novel photonic-assisted 2-D Terahertz beam steering chip using only two tuning elements is presented. The chip is based on an array of three leaky wave antennas (LWAs) with a monolithically integrated beamforming network (BFN) on a 50 µm-thick indium phosphide substrate. The THz beam angle in elevation (E-plane) is controlled via optical frequency tuning using a tunable dual-wavelength laser. An optical delay line is used for azimuth (H-plane) beam control. The simulated beam scanning range is 92° in elevation for a frequency sweep from 0.23 THz to 0.33 THz and 69.18° in azimuth for a time delay of 3.6 ps. For the frequency range from 0.26 THz to 0.32 THz, it is confirmed experimentally that the THz beam scans from −12° to +33°, which is in good agreement with the numerical simulations. The beam direction in azimuth scans with a total angle of 39° when applying a delay difference of 1.68 ps. A good agreement is found between theoretically predicted and experimentally determined THz beam angles with a maximum angle deviation below 5°. The experimental scanning angles are limited due to the mechanical constraints of the on-wafer probes, the on-chip integrated transition and the bandwidth of the THz receiver LNA. The mechanical limitation will be overcome when using a packaged chip., Deutsche Forschungsgemeinschaft (Project-ID 287022738– CRC/TRR 196(Project C07)); Bundesministerium für Bildung und Forschung (6GEM, grant No. EFRE-0400215, grant No.16KISK017, grant No.16KISK039, NRW/EFRE Terahertz-Integrationszentrum (THzIZ), Open6GHub); Agencia Estatal de Investigación (/MCIN/AEI/ 10.13039/501100011033, PID2019-109984RB-C43/AEI/10.13039/501100011033, PID2020-112545RB-C53); Ministerio de Ciencia e Innovación (FPU Program 00013/2018).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

The Canfranc Axion Detection Experiment (CADEx): search for axions at 90 GHz with kinetic inductance detectors

  • Aja, Beatriz
  • Arguedas Cuendis, Sergio
  • Arregui Padilla, Iván
  • Artal, Eduardo
  • Barreiro, R. Belén
  • Casas, Francisco J.
  • Ory, Marina C. de
  • Díaz-Morcillo, Alejandro
  • Fuente, Luisa de la
  • Gallego, Juan Daniel
  • García-Barceló, José María
  • Gimeno, Benito
  • Gómez, Alicia
  • Granados, Daniel
  • Kavanagh, Bradley J.
  • Gómez Laso, Miguel Ángel
  • Lopetegui Beregaña, José María
  • Lozano-Guerrero, Antonio José
  • Magaz, María T.
  • Martín-Pintado, Jesús
  • Martínez-González, Enrique
  • Miralda-Escudé, Jordi
  • Monzó-Cabrera, Juan
  • Najarro de la Parra, Francisco
  • Navarro-Madrid, José R.
  • Núñez Chico, Ana B.
  • Pascual, Juan Pablo
  • Pelegrín, Jorge
  • Peña Garay, Carlos
  • Rodríguez, David
  • Socuéllamos, Juan M.
  • Teberio Berdún, Fernando
  • Teniente Vallinas, Jorge
  • Vielva, Patricio
  • Vila, Iván
  • Vilar, Rocío
  • Villa, Enrique
We propose a novel experiment, the Canfranc Axion Detection Experiment (CADEx), to probe dark matter axions with masses in the range 330–460 μeV, within the W-band (80–110 GHz), an unexplored parameter space in the well-motivated dark matter window of Quantum ChromoDynamics (QCD) axions. The experimental design consists of a microwave resonant cavity haloscope in a high static magnetic field coupled to a highly sensitive detecting system based on Kinetic Inductance Detectors via optimized quasi-optics (horns and mirrors). The experiment is in preparation and will be installed in the dilution refrigerator of the Canfranc Underground Laboratory. Sensitivity forecasts for axion detection with CADEx, together with the potential of the experiment to search for dark photons, are presented., SA and JM are supported by grants PID2019-108122GB-C32 and the Maria de Maeztu grant CEX-2019-000918-M of ICCUB. The work of UPCT and IFIC is supported by grant PID2019-108122GB-C33, funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”. JMGB thanks the grant FPI BES-2017-079787, funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”. The work of Universidad de Cantabria is supported by the Ministry of Science and Innovation under Grant PID2019-110610RB-C22. CAB and IMDEA-Nanoscience work is supported by grants PID2019-105552RB-C41 and PID2019-105552RB-C44 and by Comunidad de Madrid under Grant P2018/NMT-4291. IMDEA-Nanoscience acknowledges financial support from “Severo Ochoa” Programme for Centers of Excellence in R&D (MINECO, Grant SEV-2016-0686). D.G. and A.G also acknowledge Grant DEFROST N62909-19-1-2053 from ONR Global. RBB, FJC, BJK, EMG, JMS and PV thank the Spanish Agencia Estatal de Investigación (AEI, MICIU) for the support to the Unidad de Excelencia María de Maeztu Instituto de Física de Cantabria, ref. MDM-2017-0765. RBB, FJC, EMG and PV thank the Spanish Agencia Estatal de Investigación (AEI, MCI) for the funds received through the research project, ref. PID2019-110610RB-C21. RBB, FJC, BJK, EMG, JMS and PV also thank the ‘Dark Collaboration at IFCA’ working group for useful discussions. The work done by ANTERAL S.L. is supported by project QON-Space financed by the Navarra Government Project No. 0011-1365-2021-000220. UPNA acknowledges financial support from the Spanish State Research Agency, Project No. PID2019-109984RB-C43/AEI/10.13039/501100011033 and Project No. PID2020-112545RB-C53/MCIN/AEI/ 10.13039/501100011033.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

W-band filtering antenna based on a slot array and stacked coupled resonators using gap waveguide technology

  • Santiago Arriazu, David
  • Fang, Mu
  • Zaman, Ashraf Uz
  • Gómez Laso, Miguel Ángel
  • Lopetegui Beregaña, José María
  • Arregui Padilla, Iván
This letter proposes a new design approach for filtering antennas. The novel matching reflection coefficient based method allows the integration of filters and antennas without compromising the frequency behavior of either of these components. Moreover, this integration is done avoiding the need of lengthy optimization processes and provides a high degree of flexibility in the types of antennas that can be used. In order to validate it, two examples are provided. In both cases, a 4 th -order Chebyshev bandpass filter at 101.5 GHz implemented in stacked groove gap waveguide (GGW) configuration is used, firstly along with a single aperture antenna and, subsequently, with a slotted ridge gap waveguide (RGW) array. This second example has been manufactured to demonstrate the usefulness of the new design methodology. Excellent measured performance has been obtained for a filtering antenna at W-band for the first time., This work was funded by the Spanish Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (MCIN/AEI/ 10.13039/501100011033) under Project PID2020-112545RB-C53
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Metal 3D printing for RF/microwave high-frequency parts

  • Martín Iglesias, Petronilo
  • Gómez Laso, Miguel Ángel
  • Lopetegui Beregaña, José María
  • Teberio Berdún, Fernando
  • Arregui Padilla, Iván
  • Marechal, M.
  • Calves, P.
  • Hazard, M.
  • Pambaguian, L.
  • Brandao, A.
  • Rodríguez Castillo, S.
  • Martin, T.
  • Percaz Ciriza, Jon Mikel
  • Iza, V.
  • Martín-Iglesias, Santiago
Space Systems have been historically characterised by high performance, high reliability and high cost. Every new generation of space systems tends to improve performance, keep as much as possible reliability, speeding the lead time and lower the cost. Aggressive approach is nowadays followed by some of the players of the new space ecosystem where, for instance, reli- ability can be relaxed thanks for the in-orbit redundancy or robustness to failures by having a constellation with a high number of satellites. This push towards the technology and system limit requires to investigate new methods for the manufacturing of RF/Microwave parts. RF devices such as those based on waveguide structures, benefit from an additive manufacturing approach in terms of radio frequency (RF) performance and compactness. However each manufacturing approach comes with specific features and limitations which need to be well understood and, in some cases, even taking advantage of them. This paper provides a short review of some of the RF/Microwave parts already manufactured using this technology. The paper will focus mainly on metal 3D printing parts since this technology is, at the moment, well accepted by the space community., UPNA thanks the support of the Spanish Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación (MCIN/AEI/ 10.13039/501100011033) under Project PID2020-112545RB-C53.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Synthesis of rectangular waveguide filters with smooth profile oriented to direct metal additive manufacturing

  • Percaz Ciriza, Jon Mikel
  • Hussain, Jabir
  • Arregui Padilla, Iván
  • Teberio Berdún, Fernando
  • Benito Pertusa, David
  • Martín Iglesias, Petronilo
  • Arnedo Gil, Israel
  • Gómez Laso, Miguel Ángel
  • Lopetegui Beregaña, José María
In this paper, a novel design method for rectangular waveguide filters intended for fabrication using direct metal additive manufacturing is proposed. The synthesized filters will feature a smooth profile that allows us to fabricate them orienting the filter propagation axis in the vertical building direction, achieving an optimum configuration for direct metal additive manufacturing fabrication. The novel design method is valid for any all-pole transfer function, which is initially implemented with a commensurate-line distributed unit element prototype. The impulse response of that initial prototype is then properly interpolated to obtain the target response for a smooth-profiled filter with similar length and profile excursion. Finally, the target impulse response just generated is implemented in rectangular waveguide technology employing a novel inverse scattering synthesis technique that relies on the coupled-mode theory to model the electromagnetic behavior of the waveguide filter. The novel inverse scattering synthesis technique is general and also valid for the case of filters with very high rejection levels, which is of great relevance in rectangular waveguide technology. A Ku-band low-pass filter with stringent satellite specifications is designed using the proposed method, fabricated by means of a direct metal additive manufacturing technique, and measured with a vector network analyzer. A very good agreement is achieved between the simulated and measured results, fulfilling the required specifications and demonstrating the feasibility and performance of the novel design method., This work was supported in part by the Spanish Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (MCIN/AEI/10.13039/ 501100011033) under Project TEC2017-85529-C3-2-R (co-funded by the Fondo Europeo de Desarrollo Regional (FEDER) “A way to make Europe”) and Project PID2020-112545RB-C53, and in part by the Advanced Technologies for future European Satellite Applications (TESLA) Project (European Union’s Horizon 2020 Research and Innovation Programme through the Marie Sklodowska-Curie Grant) under Grant 811232.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Robust design of 3D-printed W-band bandpass filters using gap waveguide technology

  • Santiago Arriazu, David
  • Tamayo-Domínguez, Adrián
  • Gómez Laso, Miguel Ángel
  • Lopetegui Beregaña, José María
  • Fernández-González, José Manuel
  • Martínez, Ramón
  • Arregui Padilla, Iván
In this paper, a W-band 3D-printed bandpass filter is proposed. The use of higher-order TE10n modes in groove gap waveguide (GGW) technology is evaluated in order to alleviate the manufacturing requirements. In addition to the use of higher-order modes, the coupling between them is analyzed in detail to improve the overall fabrication robustness of the component. This allows the implementation of narrow-band filters operating at millimeter-wave frequency bands (or above), which usually demand complex manufacturing techniques to provide the high accuracy required for this kind of devices. In order to show the applicability of the proposed method, a narrow-band 5th-order Chebyshev bandpass filter centered at 94 GHz, which can be easily fabricated by state-of-the-art stereolithographic (SLA) 3D-printing techniques followed by silver coating, is shown. Excellent measured performance has been obtained., Open Access funding provided by Universidad Pública de Navarra. This work was funded by the Spanish Ministerio de Ciencia e Innovación –Agencia Estatal de Investigación (MCIN/AEI/1010.13039/501100011033) under Projects TEC2017-85529-C3-1-R and TEC2017-85529-C3-2-R (co-funded by FEDER “A way to make Europe”) and Projects PID2020-112545RB-C51 and PID2020-112545RB-C53.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Enhancement of the peak power handling capability in microstrip filters by employing smooth-profiled conductor strips

  • Ahmad, Jamil
  • Hussain, Jabir
  • Arregui Padilla, Iván
  • Martín Iglesias, Petronilo
  • Arnedo Gil, Israel
  • Gómez Laso, Miguel Ángel
  • Lopetegui Beregaña, José María
This paper presents a design methodology that significantly increases the peak power handling capability (PPHC) of microstrip filters. The PPHC is limited in microstrip technology by the corona effect: a physical phenomenon caused by the ionization of the air under the presence of strong electric fields around the planar circuit. Microstrip filters with a low electric field strength in the air increases the corona threshold level, resulting in high PPHC. Conventional stepped impedance (SI) filters, which consist of cascaded step-shaped elements, exhibit sharp discontinuities. These geometric edges amplify the electric field strength in the air, consequently reducing the corona threshold. Our research group has recently reported a new synthesis technique that introduces a smooth-profile (SP) conductor strip. This SP strip eliminates any sharp discontinuities and significantly reduces the strength of the electric field. This paper focuses on the examination of the high power performance of 7th-order SP and SI low-pass filters. The cut-off frequency (fc) for both types of filters is set at 447.45 MHz, while the frequency for maximum stop-band rejection (fo) is 1 GHz. The findings indicate that the SP filter shows a notable enhancement in peak power handling capability (PPHC), with gains of 2.48 dB and 4.80 dB observed at critical pressure and ambient pressure, respectively., This work was supported by the Spanish Ministerio de Ciencia e Innovación — Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) under Project PID2020-112545RB-C53. Jamil Ahmad also acknowledges the funding received through the PRE2018-085491 grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Dual-band filtering slot array antenna for W-band application

  • Fang, Mu
  • Santiago Arriazu, David
  • Yang, Jian
  • Arregui Padilla, Iván
  • Gómez Laso, Miguel Ángel
  • Emanuelsson, Thomas
  • Zaman, Ashraf Uz
  • Kishk, Ahmed A.
A co-aperture dual-band linearly polarized slot array based on ridge gap waveguide (RGW), operating at the 74 - 78 GHz and 102 - 106 GHz bands, is designed. In each subarray, two groups of longitudinal slots for two frequency bands are excited by a single RGW channel to achieve dual-band unidirectional radiation. Additionally, grooves and notches are implemented inside the RGW structure to improve dual-band matching, and two bandpass filters (BPFs) are incorporated at each side of the subarray to realize independent dual-band feeding while also providing filtering characteristics. The proposed subarray operates as a single channel. It can expand into a multichannel array, enabling multiple-input multiple-output (MIMO) when each subarray is individually excited or broadside radiation when all subarrays are simultaneously excited. A planar array of four subarray columns was fabricated to validate the dual-band concept and its broadside radiation performance. The simulated and measured results show good agreement., This work is supported by the Swedish Innovation Agency grant with grant number 2020-02889 under Eureka CELTIC framework and the Spanish Ministerio de Ciencia e Innovación -Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) under Project PID2020-112545RB-C53.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Design of an additively-manufactured self-supported all-metal coaxial-line X-band bandpass filter

  • Pons Abenza, Alejandro
  • Arregui Padilla, Iván
  • Gómez Laso, Miguel Ángel
  • Lopetegui Beregaña, José María
  • Martín Iglesias, Petronilo
In this contribution, the design and manufacturing of an all-metal coaxial-line X-band bandpass filter is discussed. The device is 3D-printed as a self-supported structure without any dielectric inside the coaxial. The mechanical support between the inner and outer coaxial-line conductors is provided by means of λ/4 short-circuited stubs, which are also used in the bandpass filter design. The real transmission zeros (TZs) produced by the short-circuited stubs are responsible for a high filter selectivity. In order to enhance the filter performance, a second stage consisting in a coaxial-line stepped-impedance low-pass filter is integrated in the design to provide the rejection level required for the out-of-band behaviour. Following our design method, the bandpass and low-pass filters are designed separately, and a final matching step is performed to connect both and to achieve the aimed frequency specifications. In this way, a monoblock coaxial filter with very good in-band and out-of-band performance can by obtained by using an additive manufacturing (AM) procedure. Only the input/output (I/O) coaxial connectors will need to be assembled to the filter to perform the frequency measurements. The filters in this work can be seen as a first proposal towards more complex multi-functional monoblock structures using additively-manufactured coaxial technology, for highly-integrated RF chains. Other expected benefits beyond the compactness or lightweight are an increased RF shielding, electrostatic discharge risk reduction, and Passive Intermodulation (PIM) protection. In the paper, a prototype with a passband between 8 and 12 GHz is designed and manufactured, using a bandpass filter with three stubs and an integrated 15th-order low-pass filter, providing rejection for spurious frequencies up to 30 GHz. The filter is manufactured using Selective Laser Melting (SLM) and measurements show an excellent agreement with the simulations., This work was supported by the Spanish Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) under Project PID2020-112545RB-C53. The work of Alejandro Pons-Abenza was supported by the Spanish Ministerio de Universidades under Margarita Salas Program
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Rigorous design of compact high-performance 3-D microstrip filters using inverse scattering

  • Pons Abenza, Alejandro
  • Ahmad, Jamil
  • Périgaud, Aurélien
  • Arregui Padilla, Iván
  • Álvarez Botero, Germán Andrés
  • Martín Iglesias, Petronilo
  • Lopetegui Beregaña, José María
  • Delhote, Nicolas
  • Gómez Laso, Miguel Ángel
In this letter, a novel design method for 3-D microstrip filters is proposed. The method is valid for any all-pole transfer function and employs an inverse scattering synthesis technique to generate a smooth characteristic impedance profile that is implemented by smoothly varying the substrate height and strip width. In this way, strongly enhanced characteristic impedance excursions can be implemented, allowing us to synthesize filters with very wide rejection bands and very compact physical dimensions. As an example of application, a Ku-band low-pass filter (LPF) with cut-off frequency of 11.8 GHz and rejection band up to 36 GHz is designed, featuring a length of 10.66 mm. The filter is fabricated through additive manufacturing (AM) and the measurements obtained confirm its excellent performance., This work was supported by Spanish Ministerio de Ciencia e Innovacion-Agencia Estatal de Investigación (MCIN /AEI/10.13039/501100011033) under Project PID2020-112545RB-C53. Open access funding provided by Universidad Publica de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A 3-D-printing-oriented coaxial-line filter with wide out-of-band rejection

  • Baranowski, Michal
  • Pons Abenza, Alejandro
  • Arregui Padilla, Iván
  • Lopetegui Beregaña, José María
  • Álvarez Botero, Germán Andrés
  • Lamecki, Adam
  • Gómez Laso, Miguel Ángel
  • Martín Iglesias, Petronilo
In this letter, a novel design for a 3-D-printed, self-supported coaxial-line X-band filter is presented. The filter is intended for Earth observation (EO) data downlink systems, where it must effectively reject signals in a wide frequency range. The filter design incorporates a 15th-order low-pass filter structure with a smooth profile, integrated with a short bandpass section with four $\lambda /4$ short-circuited stubs. The optimization of the low-pass section is attained by means of shape deformation, including the inner and outer coaxial conductors, and leads to a wide rejection band up to around 40 GHz, to suppress the third harmonic and other undesired out-of-band frequencies. A prototype was fabricated in one piece in an aluminum alloy using selective laser melting (SLM) and measured, exhibiting excellent agreement with simulations. In terms of out-of-band performance, the proposed coaxial-line filter is superior to other related state-of-the-art solutions., This work was supported in part by the National Science Centre, Poland, under Agreement 2020/39/O/ST7/02897; and in part by Spanish Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) under Project PID2020-112545RB-C53.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Novel design method for millimeter-wave gap waveguide low-pass filters using advanced manufacturing techniques

  • Santiago Arriazu, David
  • Gómez Laso, Miguel Ángel
  • Lopetegui Beregaña, José María
  • Arregui Padilla, Iván
In this paper, a groove gap waveguide (GGW) low-pass filter is proposed for the first time. Gap waveguide technology represents an interesting alternative as a low-loss, cost-effective, high- performance transmission line and packaging solution for microwave and millimeter-wave systems. This technology may exhibit a frequency behavior similar to rectangular waveguide but with some advantages such as the no need of electrical contact between the upper and lower plates of the GGW, making it an attractive alternative in the design of satellite devices at high frequencies. However, all the previous literature focused on band-pass filters, while design methods for GGW low-pass filters have not been reported. Furthermore, in this paper a new manufacturing approach is proposed and its performance has been compared with traditional methods such as Computer Numerical Control (CNC) milling. The new approach relies on the Selective Laser Melting (SLM)-3D printing of the filter followed by a post-processing step, in which it is partially mechanized using CNC milling to improve the surface finish. Measurements of the manufactured prototypes are also included to compare both techniques at millimeter-waves, showing the advantages of the new fabrication method and the excellent agreement with the simulations., This work was supported by the Spanish Ministerio de Ciencia e Innovación–Agencia Estatal de Investigación (MCIN/AEI/ 10.13039/501100011033) under Project PID2020-112545RB-C53.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Enhancing magneto-dielectric material characterization by integrating SRR sensor, de-embedding procedure, and artificial neural network modeling

  • Álvarez Botero, Germán Andrés
  • Duque Madrid, Nathalia
  • Lobato-Morales, Humberto
  • Méndez-Jerónimo, Gabriela
  • Hui, Katherine
  • Tarabay, Naji
  • Pons Abenza, Alejandro
  • Arregui Padilla, Iván
  • Lopetegui Beregaña, José María
  • Gómez Laso, Miguel Ángel
  • Vélez, Camilo
This work presents an improved methodology for characterizing the effective permittivity (ε) and permeability (μ) of magnetodielectric (MD) composites, using Fe3O4 nanoparticles dispersed in a PDMS polymer matrix. The proposed approach integrates a planar split-ring resonator sensor design and an artificial neural network model for parameter extraction, complemented by a line-line deembedding methodology to eliminate parasitic effects from measurements. The experimental results are compared with predictions derived from the Maxwell-Garnett and Polder-Van Santen effective medium models, demonstrating a close agreement between theory and measurements. This study highlights the importance of accurate experimental procedures and advanced modeling techniques in understanding the electromagnetic behavior of MD composites and offers insights into their potential for developing next-generation microwave components., We acknowledge the support received from the Ministry of Science and Innovation-State Research Agency (MCIN/AEI/10.13039/501100011033), Spain, through project PID2020-112545RB-C53, as well as the support from Navarra Government through the Andia Fellowship. Additionally, we thank the Samueli School of Engineering, University of California, Irvine, USA, for their support. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Robust filter design built in a contactless metallic multilayer waveguide at W-band

  • Garcia-Martinez, Sergio (0000-0002-2427-8264)
  • Santiago Arriazu, David
  • Tamayo-Domínguez, Adrián
  • Sánchez-Olivares, Pablo
  • Arregui Padilla, Iván
  • Lopetegui Beregaña, José María
  • Gómez Laso, Miguel Ángel
  • Fernández-González, José Manuel
This article presents the design and experimental validation of a W-band waveguide cavity filter operating around 91 GHz, using a periodic electromagnetic bandgap (EBG) structure with glide symmetry to implement the filter in a stack of multiple thin metallic sheets without electric contact between them. The filter is based on vertically stacked cavities that use the TE103 mode, which offers increased robustness to manufacturing and assembly errors due to the large dimensions of the cavity. The glide-symmetric circular hole EBG structure is analyzed and integrated to suppress unwanted field leakage between the metallic layers with a broad stopband. The proposed filter maintains effective operation in the 88–94-GHz frequency range, even with gap variations between layers of up to 20 µm. The filter is fabricated using laser cutting, achieving a low surface roughness and high dimensional accuracy. Experimental measurements show excellent agreement with the simulations, with a return loss greater than 20 dB and an insertion loss below 0.5 dB. These results demonstrate the possibility to achieve high performance filters at millimeter-wave frequencies while maintaining low fabrication complexity and cost using the multilayer waveguide technology., This work was supported in part by Spanish Government, Ministerio de Ciencia, Innovación y Universidades, through the Projects New Array Antenna Technologies and Digital Processing for the Future Integrated Terrestrial and Space-Based Millimeter Wave Radio Systems UPM-InTerSpaCE under Grant PID2020-112545RB-C51; in part by the Filters and Passive Components for Future Integrated Terrestrial and Space-based Millimeter Wave Radio Systems UPNA-InTerSpaCE under Grant PID2020-112545RB-C53; and in part by the Sub-Terahertz Antenna Technologies for Communications In the Road to 6G UPM -STAIRto6G funded by MICIU/AEI/10.13039/501100011033 and FEDER, UE, under Grant PID2023-151385OA-I00. The work of Sergio Garcia-Martinez was supported by the Universidad Politécnica de Madrid, Programa Propio.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Cavity-stacked filter in CLAF-SIW technology for millimeter waves

  • Segura-Gómez, Cleofás
  • Biedma-Pérez, Andrés
  • Santiago Arriazu, David
  • Palomares-Caballero, Ángel
  • Arregui Padilla, Iván
  • Gómez Laso, Miguel Ángel
  • Padilla, Pablo
This work presents the design of a cavity-stacked bandpass filter (BPF) using contactless air-filled substrate integrated waveguide (CLAF-SIW) technology for millimeter-wave frequencies. This technology is a variant of air-filled SIW technology, incorporating contactless techniques. It enables the reduction of dielectric losses in SIW filters while supporting multilayer structures with robust assembly. The cavity-stacked filter topology allows for very good frequency responses with a reduced footprint and no transitions needed. As an example, a 4th-order Chebyshev bandpass filter composed of four stacked cavities, coupled through irises, is shown. The iris layers are fabricated by metallizing the slot edges of a PCB, while the cavity layers are implemented using CLAF-SIW. The filter has been designed and manufactured to provide a passband response from 36 GHz to 37.5 GHz. A good agreement between measurement and simulation has been achieved. The losses in the proposed CLAF-SIW filter are primarily due to the metal roughness of the low-cost commercial laminates used., This work has been supported by grant TED2021-129938B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. It has also been supported by Grants PID2020-112545RB-C53, PID2020-112545RB-C54, PDC2022-133900-I00, and PDC2023-145862-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. It has also been supported by Grant FPU20/00256 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future.