Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A review of lipase immobilization on hydrophobic supports incorporating systematic mapping principles

  • Guimarães, José R.
  • Oliveira, K.S.G.C.
  • Gonçalves, M.C.P.
  • Romanelli, J.P.
  • Lopes, L.A.
  • Berenguer-Murcia, I.
  • Fernández-Lafuente, Roberto
  • Tardioli, P.W.
A review of the literature covering research on the immobilization of lipases on hydrophobic supports was performed using systematic mapping (SM) concepts. This approach consists of a rigorous review of the methodology used to catalog evidence, to identify gaps at the frontier of knowledge, to identify unknown trends, and to list research groups. Our results show a wide variety of available lipases, including commercial, wild-type and recombinant strains. However, the most commonly used lipases are lipases from Thermomyces lanuginosus (TLL), Candida rugosa (CRL) or Rhizomucor miehei (RML) and lipase B from Candida antarctica (CALB). A wide variety of supports with different degrees of hydrophobicity were identified and the supports activated with a layer of octyl or octadecyl groups were the most commonly used. The advantages of lipase immobilization on these supports are discussed. Among them, the immobilization, purification, stabilization and hyperactivation of lipases in a single step stand out. Moreover, problems related to lipase immobilization by interfacial activation are highlighted (mainly enzyme release). Strategies to overcome these problems include immobilization on heterofunctional supports or intermolecular crosslinking of enzymes immobilized by physical and/or chemical agents. The possibility of increasing the capacity of supports by lipase multilayer immobilization is also discussed. Finally, the structure, distribution of the network and the frequency of co-occurrence between lipases and supports are elucidated to determine the possible hotspots and hitherto unexplored advances in knowledge. © 2023 The Royal Society of Chemistry, This work was funded by São Paulo Research Foundation (FAPESP, grant number 2016/10636-8), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior – Brasil (CAPES, Finance Code 001), Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq, project numbers 405889/2016-0 and 308212/2017-7), Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (project PID2022-136535OB-I00 and MCIN/AEI/10.13039/501100011033/) and by FEDER A Way of Making Europe funds (project PID2021-123079OB-I00), and Generalitat Valenciana (CIPROM/2021/70)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nitrogen sites prevail over textural properties in N-doped carbons for the oxygen reduction reaction

  • Quílez Bermejo, J.
  • Pérez Rodríguez, Sara
  • Torres Gamarra, Daniel
  • Canevesi, Rafael L. S.
  • Morallón, Emilia
  • Cazorla Amorós, Diego
  • Celzard, Alain
  • Fierro, Vanessa
5 figures., Nitrogen-doped carbon-based electrodes are among the most promising alternatives to platinum-based electrodes in the cathode of fuel cells and metal-air batteries, where the oxygen reduction reaction (ORR) takes place. Among the approaches for improving ORR activity, nitrogen functionalities and well-developed textural properties have proved very effective. Nonetheless, the question of which between nitrogen active sites or textural properties are more crucial in N-doped carbon materials remains unanswered. This work proposes a comparative and critical approach through the selective functionalization of four commercial activated carbons with different textural properties. This study highlights the greater importance of N-doping in relation to the textural properties of carbon materials, and provides fundamental insights for conclusively addressing the ongoing debate within the carbon community about the significance of these two factors in the context of ORR., The ANR-15-IDEX-04-LUE project and the TALiSMAN and TALiSMAN2 projects funded by the European Regional Development Fund (ERDF) are gratefully acknowledged. The authors would also like to thank project PID2021-123079OB-I00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”. Finally, JQB thanks the Ministerio de Universidades, the European Union, and the University of Alicante for their financial support (MARSALAS21-21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Proteases immobilized on nanomaterials for biocatalytic, environmental and biomedical applications: Advantages and drawbacks

  • Bilal, Muhammad
  • Qamar, Sarmad Ahmad
  • Carballares, Diego
  • Berenguer-Murcia, Ángel
  • Fernández-Lafuente, Roberto
Proteases have gained significant scientific and industrial interest due to their unique biocatalytic characteristics and broad-spectrum applications in different industries. The development of robust nanobiocatalytic systems by attaching proteases onto various nanostructured materials as fascinating and novel nanocarriers has demonstrated exceptional biocatalytic performance, substantial stability, and ease of recyclability over multiple reaction cycles under different chemical and physical conditions. Proteases immobilized on nanocarriers may be much more resistant to denaturation caused by extreme temperatures or pH values, detergents, organic solvents, and other protein denaturants than free enzymes. Immobilized proteases may present a lower inhibition. The use of non-porous materials in the immobilization prevents diffusion and steric hindrances during the binding of the substrate to the active sites of enzymes compared to immobilization onto porous materials; when using very large or solid substrates, orientation of the enzyme must always be adequate. The advantages and problems of the immobilization of proteases on nanoparticles are discussed in this review. The continuous and batch reactor operations of nanocarrier-immobilized proteases have been successfully investigated for a variety of applications in the leather, detergent, biomedical, food, and pharmaceutical industries. Information about immobilized proteases on various nanocarriers and nanomaterials has been systematically compiled here. Furthermore, different industrial applications of immobilized proteases have also been highlighted in this review., The NOBELIUM JOINING GDANSK TECH RESEARCH COMMUNITY program is graciously acknowledged for supporting this work under the international collaboration project awarded to Muhammad Bilal (Grant number 44/2023/IDUB/I.1). We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00). A.B.M. thanks the Generalitat Valenciana (CIPROM/2021/70) for financial support and PID2021-123079OB-I00 project funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Immobilized Lipases in the Synthesis of Short-Chain Esters: An Overview of Constraints and Perspectives

  • Sousa, Ronaldo Rodrigues de
  • Santos, Michelle M. dos
  • Medeiros, Matheus W. R.
  • Manoel, Evelin A.
  • Berenguer Murcia, A.
  • Freire, Denise Maria Guimarães
  • Fernández-Lafuente, Roberto
  • Ferreira-Leitão, Viridiana Santana
Biocatalysis—specifically the use of immobilized lipases—has been proposed as a greener alternative for ester production. Several critical challenges, such as the high cost of biocatalysts, are delaying the industrial implementation of biocatalysis. Moreover, for short-chain ester synthesis, the strong inhibition/inactivation potential of short-chain acids and alcohols on lipases leads to long reaction cycles and/or the need to use organic solvents to overcome the limitations of solvent-free systems and, consequently, the decrease in product concentrations. This review presents an overview of the scientific developments in enzymatic short-chain ester synthesis, compiling the constraints on their syntheses from a process perspective, including insights about key performance indicators (KPI) and economic parameters., We gratefully recognize the financial support from Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do Rio de Janeiro—FAPERJ (APQ1 E26/211.736/2021 and IT Grant E-26/260.418/2022), Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00). A.B.M. thanks the Generalitat Valenciana (CIPROM/2021/70) for financial support and PID2021-123079OB-I00 project funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A comprehensive review of lipase-catalyzed acidolysis as a method for producing structured glycerides

  • Tacias-Pascacio, Veymar G.
  • Abellanas-Pérez, Pedro
  • Andrades, Diandra de
  • Tavano, Olga Luisa
  • Mendes, Adriano A.
  • Berenguer Murcia, A.
  • Fernández-Lafuente, Roberto
The production of structured lipids is a current trend in food technology in order to enhance the properties of fats and oils. Lipases have been utilized in many instances for this purpose, in most examples in an immobilized form. In this review, after discussing the different strategies to produce artificial lipids using lipases (esterification, transesterification, interesterification), we have focused on acidolysis. The reaction commences with hydrolysis at one position of the triglyceride molecule and is followed by the esterification between the released hydroxyl group and the target fatty acid (although other carboxylic acids can be used, such as phenolic acid derivatives). This means that water plays a double role, as substrate in the first step and as an undesired by-product in the second one. Therefore, the control of water activity becomes critical in these reactions. This review discusses the advantages, possibilities and drawbacks of this strategy to produce tailor-made designed lipids, summarizing many of the papers related to this strategy. The summarized results show the complexity of this reaction that can make the understanding and reproducibility of the reactions complex if there are no strict controls of all parameters determining the final yields., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00), CNPq (Grants 307809/2020-0, 306253/2023-2, 405418/2021-3) and FAPERGS (grants 21/2551-0002270-1, 22/2551-0000397-4). A.B.M. thanks the Generalitat Valenciana (CIPROM/2021/70) for financial support. We thank Novozymes, and specially R. Martinez, by the kind donation of enzymes. This communication is part of the R + D + i project PID2021-123079OB-I00 funded by MCIN/ AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Zeolite@Metal-organic framework core-shell synthesized from the aluminum of the zeolite with accessible internal surface for CO2 adsorption

  • Güemes, Lucas
  • Navarro, Marta
  • Cacho-Bailo, Fernando
  • Jaimes-Paez, Cristian D.
  • Cazorla-Amorós, Diego
  • Téllez, Carlos
  • Coronas, Joaquín
Data will be made available on request., Combining the rigid microporosity of zeolites with the more versatile structures of metal–organic frameworks (MOFs) seeks to obtain a synergistic effect of both materials. Starting from a low cost and industrially produced zeolite, as it is zeolite NaA (with the LTA type structure), we show that it is possible to crystallize a MOF as shell onto it by only using an aqueous solution of terephthalic acid (H2BDC). Unlike other zeolite-MOF hybrids reported in the literature, the crystallized MOF only uses the aluminum from the zeolite and may share in turn some aluminum atoms with the inorganic zeolite core, therefore it consists solely of zeolitic Al and BDC. Depending on the pretreatment of the zeolite and the synthesis conditions (pH, time, linker ratio), the crystalline zeolite core is maintained or converted into an amorphous aluminosilicate. Thus, it is possible to retain a part of the adsorption properties of the parent zeolite without degrading its structure. The resulting core–shell material, designated as LTA@Al-BDC, combines the zeolite microporosity and molecular sieving properties with the MOF that crystallizes as high aspect ratio sheets which, together with its hydrophobicity, favors the contact with polymeric materials. In addition, being zeolite 4A (NaA) affinity towards CO2 been probed, the resulting LTA@Al-BDC material constitutes a prominent candidate towards CO2 separation., This work gratefully acknowledges grants PID2022-138582OB-I00 and PID2021-123079OB-I00 funded by MICIU/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”. L. Güemes also thanks the Aragón Government (DGA) for his Ph.D. grant. Financial assistance from the Government of Aragón (T68_23R) is also acknowledged. CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033/., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Zeolite@Metal-organic framework core-shell synthesized from the aluminum of the zeolite with accessible internal surface for CO2 adsorption

  • Güemes, Lucas
  • Navarro, Marta
  • Cacho-Bailo, Fernando
  • Jaimes-Paez, Cristian D.
  • Cazorla-Amorós, Diego
  • Téllez, Carlos
  • Coronas, Joaquín
Combining the rigid microporosity of zeolites with the more versatile structures of metal–organic frameworks (MOFs) seeks to obtain a synergistic effect of both materials. Starting from a low cost and industrially produced zeolite, as it is zeolite NaA (with the LTA type structure), we show that it is possible to crystallize a MOF as shell onto it by only using an aqueous solution of terephthalic acid (H2BDC). Unlike other zeolite-MOF hybrids reported in the literature, the crystallized MOF only uses the aluminum from the zeolite and may share in turn some aluminum atoms with the inorganic zeolite core, therefore it consists solely of zeolitic Al and BDC. Depending on the pretreatment of the zeolite and the synthesis conditions (pH, time, linker ratio), the crystalline zeolite core is maintained or converted into an amorphous aluminosilicate. Thus, it is possible to retain a part of the adsorption properties of the parent zeolite without degrading its structure. The resulting core–shell material, designated as LTA@Al-BDC, combines the zeolite microporosity and molecular sieving properties with the MOF that crystallizes as high aspect ratio sheets which, together with its hydrophobicity, favors the contact with polymeric materials. In addition, being zeolite 4A (NaA) affinity towards CO2 been probed, the resulting LTA@Al-BDC material constitutes a prominent candidate towards CO2 separation.