Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 85
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Exploring the synergistic effect of palladium nanoparticles and highly dispersed transition metals on carbon nitride/super-activated carbon composites for boosting electrocatalytic activity"

  • Alemany Molina, Gabriel
  • Navlani-García, Miriam
  • Juan Juan, Jerónimo
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Exploring the synergistic effect of palladium nanoparticles and highly dispersed transition metals on carbon nitride/super-activated carbon composites for boosting electrocatalytic activity

  • Alemany Molina, Gabriel
  • Navlani-García, Miriam
  • Juan Juan, Jerónimo
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
In the present work, multifunctional electrocatalysts formed by palladium nanoparticles (Pd NPs) loaded on Fe or Cu-containing composite supports, based on carbon nitride (C3N4) and super-activated carbon with a high porosity development (SBET 3180 m2/g, VDR 1.57 cm3/g, and VT 1.65 cm3/g), were synthesised. The presence of Fe or Cu sites favoured the formation of Pd NPs with small average particle size and a very narrow size distribution, which agreed with Density Functional Theory (DFT) calculations showing that the interaction of Pd clusters with C3N4 flakes is weaker than with Cu- or Fe-C3N4 sites. The electroactivity was also dependent on the composition and, as suggested by preliminary DFT calculations, the Pd-Cu catalyst showed lower overpotential for hydrogen evolution reaction (HER) while bifunctional oxygen reduction reaction/ oxygen evolution reaction (ORR/OER) behaviour was superior in Pd-Fe sample. The Pd-Fe electrocatalyst was studied in a zinc-air battery (ZAB) for 10 h, showing a performance similar to a commercial Pt/C + RuO2 catalyst with a high content of precious metal. This study demonstrates the synergistic effect between Pd species and transition metals and shows that transition metals anchored on C3N4-based composite materials promote the electroactivity of Pd NPs in HER, ORR and OER due to the interaction between both species.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

The relevant role of TiO2 for enhancing the Ru/TiO2-catalyzed conversion of levulinic acid to γ-valerolactone

  • Ruiz-Bernal, Zaira
  • Tane, Elena Georgiana
  • Sánchez-Lozano, Jorge
  • Rives López, Juan Manuel
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Tane, Elena Georgiana|||/items/45998146-5019-4a50-a12f-43cf5211e86c
  • Rives López, Juan Manuel|||/items/42cfee2e-72f9-42d3-9936-9436d56a02fd
Levulinic acid (LA), that can be obtained from the acidic hydrothermal carbonization of biomass, is a platform molecule with several possibilities to be transformed into useful chemicals. The hydrogenation of LA to γ-valerolactone (GVL) requires a bifunctional catalyst, with both metallic and acidic active sites. In this study, TiO2 was the selected support for its acidic properties, and Ru was the metal phase for its high activity in this reaction. 1% wt. Ru/TiO2 catalysts were prepared using either commercial P25 or TiO2 prepared by hydrothermal (HT) synthesis (with or without the addition of a low concentration HCl solution). The catalysts were used without previous reduction in catalytic tests carried out under mild reaction conditions, and the influence of the surface chemistry, porosity, crystalline structure, and oxygen vacancies on the TiO2 support, as well as the interaction between Ru and the TiO2 support were studied. All the catalysts demonstrated promising results under mild reaction conditions (24 – 65 % GVL yield), being the catalytic activity enhanced when using the Ru/HT-TiO2 catalysts compared to the analogous Ru/P25 one, indicating that a higher surface area improves catalytic performance. High GVL yield (65 %) and excellent reusability over three cycles were achieved with the best catalyst, synthesized without using HCl solution. Although isolating the effect of individual variables remains challenging, our results have shown that the surface chemistry content and composition in the synthesized TiO2 supports have some influence on the formation of Ru0 on them.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for: "Selective biomass conversion over novel designed tandem catalyst"

  • Azar, Fatima Zahra
  • El Kasmi, Achraf
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Liu, Haichao
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
Conjunto de datos que han permitido escribir el artículo identificado con el DOI https://doi.org/10.1016/j.envres.2025.121141
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Nanostructured TiO2 synthesized by different methods: Relationship between TiO2 porosity and crystalline-amorphous structure

  • El Koulali, Fatima
  • Ouzzine, Mohammed
  • Cano-Casanova, Laura
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
The present manuscript focuses on important aspects regarding TiO2, which is typically used in many applications. On one hand, a thorough review of methods for synthesizing nanostructured TiO2 is presented. Using these methods, and different post-synthesis heat-treatment conditions, close to thirty TiO2 materials have been prepared, and their porous texture and crystalline and amorphous structure have been characterized. In this large number of samples, the porous texture characterization has revealed a high contribution of mesoporosity in a large number of the synthesized materials, being in many materials around 60–70 %. Moreover, different percentages of crystalline phases, anatase, brookite, rutile, and amorphous titania are developed depending on the TiO2 preparation conditions. These fractions have been determined from X-ray diffraction data using the “simple” characterization method reported by Cano-Casanova et al., inspired by Jensen et al., and Bellardita et al., also exploring its limitations. This analysis has allowed assessing a linear relationship between porosity, particularly between the surface area, and the amorphous phase content in titanium dioxide. A relationship had been previously suggested in the literature, but never correlated in such a way. In summary, the present study constitutes a tool to help other researchers select the most suitable method for synthesizing nanostructured TiO2 materials with target properties and, also, to characterize them, and have a very easy and straightforward estimation of TiO2 amorphous phase content after the determination of their surface areas.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Direct cost-efficient hydrothermal conversion of Amazonian lignocellulosic biomass residue

  • Azar, Fatima Zahra
  • El Kasmi, Achraf
  • Cruz Jr., Orlando F.
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
The transformation of non-edible lignocellulosic biomass into high added-value chemicals and biofuels associated with lower energy process requirements is a promising strategy for meeting the actual demands of clean energy. Here, we report the study of the non-catalytic conversion of biomass wastes issued from two Amazonian abundant fruits (cupuaçu shell and assai stone) into liquid valuable chemicals. The parent biomass samples were first comprehensively characterized using TG, XRD, and FTIR; then, they were pretreated by ball milling and by chemical processing in ionic liquid, and finally, they were hydrothermally treated to be converted into chemical products benefiting from their hemicellulose and cellulose contents. The results revealed the importance of the pretreatments in the conversion rate, while the selectivity into main chemical products (such glucose, HFM, furfural, xylose) is not affected by the pretreatments neither physical nor chemical ones. The conversion of both biomasses and their products’ distribution were comprehensively discussed, with the highest conversion obtained using assai stone biomass (90%). This study could pave the way for investigating the non-catalytic route of biomass conversion, as a lesser energy process, resulting in a cost-effective conversion process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Carbon supported Ru, Ni and RuNi catalysts for the transformation of levulinic acid to γ-valerolactone. Activity of carbon metal-free samples and mechanistic insight based on the redox properties of the oxygen surface groups

  • Tane, Elena Georgiana
  • Ruiz-Bernal, Zaira
  • López-Serrano, Celia
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Tane, Elena Georgiana|||/items/45998146-5019-4a50-a12f-43cf5211e86c
Catalysts based on Ru, Ni or RuNi supported on carbon materials (Ru/C, Ni/C and RuNi/C) have been prepared by impregnation with aqueous solutions of RuCl3 or Ni(NO3)2 and applied in the transformation of levulinic acid (LA) to obtain γ-valerolactone (GVL). The carbon supports used are two commercial activated carbons (named WVA and WVB) and a biochar (named ASbc) prepared by hydrothermal carbonization of almond shell residues. The metal catalysts and the carbon supports have been characterized using the following techniques: X-ray Photoelectron Spectroscopy (XPS), Inductively Coupled Plasma Mass Spectrometry (ICP-MS), Transmission Electron Microscopy (TEM), elemental analysis, gas adsorption, potentiometric titration and Fourier Transform Infrared spectroscopy (FTIR). Catalytic activity tests have been performed both, with the as-prepared catalysts and with them after being submitted to a reduction treatment. The as-prepared Ru/C catalysts have led to LA conversion ranging from 30 to 74%, depending on the carbon material used as support, and the catalytic activity has notably increased when a reduction treatment has been applied. In contrast, the bimetallic RuNi/C and the monometallic Ni/C catalysts exhibited very low catalytic activity, even after a reduction treatment. The catalytic activity tests carried out with the pristine WVA, WVB and ASbc carbon materials have surprisingly shown activity for the transformation of LA into GVL. These findings can be considered promising results since metal-free catalysts can be used for this reaction.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Fe-Nx biomass-derived carbon material as efficient cathode electrocatalyst for alkaline direct methanol fuel cells"

  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Baglio, Vincenzo
  • Zignani, Sabrina Campagna
  • Aricò, Antonino Salvatore
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Lo Vecchio, Carmelo
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Pt nanoparticles for improving the performance and durability of Fe-N-C based materials towards oxygen reduction reaction in alkaline direct methanol fuel cells

  • Alemany Molina, Gabriel
  • Lo Vecchio, Carmelo
  • Baglio, Vincenzo
  • Aricò, Antonino Salvatore
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Pt-alloy nanoparticles have been reported to enhance the oxygen reduction reaction (ORR) durability and boost Pt methanol tolerance. In this work, we have studied two different Pt-Fe-N-C based materials, where one of the carbon materials is derived from a biomass residue (almond shell), prepared by standard impregnation and NaBH4 reduction or one-pot high-temperature treatment. The materials were characterized in terms of methanol tolerance, accelerated durability tests, power density in membrane electrode assembly (MEA) configuration, and stability (100 h). The results showed that, although the particle size distribution obtained for the one-pot synthesis was wider, an effective modification of the Pt structure was observed, which was translated into a higher methanol tolerance. When a small amount of platinum was incorporated in the biomass-derived Fe-N-C catalysts, and tested for the first time (to the best of our knowledge) in alkaline direct methanol fuel cell (ADMFC), significant improvement in durability under ORR conditions was achieved, which finally resulted in superior performance in MEA configuration.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Straightforward Synthesis Methodology for Obtaining Excellent ORR Electrocatalysts From Biomass Residues Through a One Pot-High Temperature Treatment Approach

  • Alemany Molina, Gabriel
  • Pabón-Román, Keila Melissa
  • Chinchilla, Lidia Esther
  • Calvino, Jose J.
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Pabón-Román, Keila Melissa|||/items/72dcae70-f639-4cf0-8a8f-ba0e2310eefb
Materials prepared from biomass residues are potential candidates to substitute the Pt-based commercial electrocatalysts in oxygen reduction reaction (ORR). Although some investigations have reported activity and durability comparable to Pt/C using biomass-derived catalysts based on Fe─N─C sites, it remains a challenge to decrease the environmental impact of the production of these materials. A straightforward procedure is developed to obtain excellentORR electrocatalysts from biomass residues which requires a single high-temperature treatment. The final washing step is avoided by optimizing the initial amount of Fe precursor (FeC2O4). Besides the formation of iron oxide nanoparticles, a highly dispersed Fe phase is detected by High Angle Annular Dark Field Scanning Transmission Electron Microscopy and Energy Dispersive X-Ray Spectroscopy (HAADF-STEM-XEDS) analysis as well as graphitic carbon structures. The best performance for almond shell-based electrocatalysts is achieved for the sample containing 4.6 wt. % of Fe. The procedure developed is also applied to oceanic posidonia and eucalyptus residues, also showing excellent ORR behavior. The best sample is studied in a primary Zn-air battery (ZAB) obtaining a maximum power density of 59 mW cm−2 and 755 mAh gZn−1 capacity.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Efficient biomass-derived catalysts for alkaline short-chain alcohols electroreforming: A focus on low platinum loading"

  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Mosca, Erminia
  • Lo Vecchio, Carmelo
  • Aricò, Antonino Salvatore
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Baglio, Vincenzo
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Pd Catalysts Based on C3N4-Modified Activated Carbon Derived from Biomass Residues for the Dehydrogenation of Formic Acid"

  • Bernal-Vela, María|||/items/bc8b62c6-4a07-42d8-bb19-9badbde5f5aa
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A review on the immobilization of bromelain

  • Tacias-Pascacio, Veymar G.
  • Castañeda-Valbuena, Daniel
  • Tavano, Olga Luisa
  • Abellanas-Perez, Pedro
  • Andrades, Diandra de
  • Santiz-Gómez, José Alfredo
  • Berenguer-Murcia, Ángel
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
This review shows the endeavors performed to prepare immobilized formulations of bromelain extract, usually from pineapple, and their use in diverse applications. This extract has a potent proteolytic component that is based on thiol proteases, which differ depending on the location on the fruit. Stem and fruit are the areas where higher activity is found. The edible origin of this enzyme is one of the features that determines the applications of the immobilized bromelain to a more significant degree. The enzyme has been immobilized on a wide diversity of supports via different strategies (covalent bonds, ion exchange), and also forming ex novo solids (nanoflowers, CLEAs, trapping in alginate beads, etc.). The use of preexisting nanoparticles as immobilization supports is relevant, as this facilitates one of the main applications of the immobilized enzyme, in therapeutic applications (as wound dressing and healing components, antibacterial or anticancer, mucus mobility control, etc.). A curiosity is the immobilization of this enzyme on spores of probiotic microorganisms via adsorption, in order to have a perfect in vivo compatibility. Other outstanding applications of the immobilized enzyme are in the stabilization of wine versus haze during storage, mainly when immobilized on chitosan. Curiously, the immobilized bromelain has been scarcely applied in the production of bioactive peptides.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Microwave-Assisted Functionalization of Single-Walled Carbon Nanotubes as a Platform for a Supported Iridium Catalyst

  • Rodríguez-Flórez, Lesly V.
  • Retamosa, Maria de Gracia
  • Martínez-Sánchez, Beatriz
  • Cazorla-Amorós, Diego
  • Nájera, Carmen
  • Yus, Miguel
  • Sansano, Jose M.
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Retamosa, Maria de Gracia|||/items/9120267a-8096-49ef-8259-06aad626c129
  • Rodríguez-Flórez, Lesly V.|||/items/7c1155f2-fa18-402a-b7df-a1cef44bbfc4
  • Sansano, Jose M.|||/items/9f05bcff-af80-4b5d-8ea7-042f02ae487b
Single-walled carbon nanotubes (SWCNTs) were functionalized by treatment with imino esters through 1,3-dipolar cycloaddition activated by thermal 1,2-prototropy. The reaction was optimized and analyzed by using various heating methods. The functionalization afforded pyrrolidino-functionalized nanotubes that were characterized by using several techniques. The ester group was then transformed into the corresponding SWCNT–iridium carboxylate and, as a proof of concept, the product was tested as a catalyst in the hydrogen-transfer reaction of acetophenone to yield 1-phenylethanol.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Evaluating H2 Production by Ultraviolet-Induced Water Splitting over (Cu or Ni)-TiO2 Nanoparticle Photocatalysts

  • Bouchabou, Meryem
  • Rives López, Juan Manuel
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Rives López, Juan Manuel|||/items/42cfee2e-72f9-42d3-9936-9436d56a02fd
This study explores the surface modification of TiO2 P25 with nanosized copper (Cu) or nickel (Ni) for photocatalytic hydrogen production via water splitting. Photocatalysts with 1 or 5 wt % metal loadings were synthesized using a cost-effective impregnation method and were tested as-prepared (XM/P25) and after thermal reduction under hydrogen flow (XM/P25-r). Pre-calcination was omitted to simplify the synthesis. The characterization of the photocataysts revealed key physicochemical, optical, and electronic properties, including the surface distribution and oxidation states of metal species and their interaction with TiO2. TEM and EDS showed well-distributed metal species forming nanometric domains on the P25 surface. XPS and Auger spectroscopy allowed the identification of different metal oxidation states and species. After reduction, Cu0 and Ni0 phases coexisted with oxidized species, enhancing light absorption and reducing the electron–hole recombination, confirmed by UV–vis DRS and PL, respectively. Cu species seemed to exhibit stronger interaction with TiO2 than Ni ones. Photochemical results showed that only the thermally reduced photocatalysts led to immediate hydrogen production, highlighting the need for zero-valent metal species for an efficient hydrogen generation. 5Ni/P25-r and 5Cu/P25-r outperformed P25, achieving 331 and 284 μmol H2·gcat–1·h–1, respectively, compared to 261 μmol H2·gcat–1·h–1 for P25. Although in terms of hydrogen production 5Ni/P25-r slightly outperformed 5Cu/P25-r, the latter demonstrated greater stability, possibly due to the oxidation of Ni during the tests. As-prepared photocatalysts can be activated after extended UV irradiation; for instance, 5Cu/P25 starts producing hydrogen after 10 h of irradiation as a result of the in situ metal reduction, confirmed by the color change in the photocatalyst.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Hydrogen Storage System Attained by HCOOH-CO2 Couple: Recent Developments in Pd-Based Carbon-Supported Heterogeneous Catalysts

  • Riquelme-García, Paula
  • Navlani-García, Miriam
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Riquelme-García, Paula|||/items/eaa40ff9-6931-43ac-9865-2c13ac4a77c9
The present review revisits representative studies addressing the development of efficient Pd-based carbon-supported heterogeneous catalysts for two important reactions, namely, the production of hydrogen from formic acid and the hydrogenation of carbon dioxide into formic acid. The HCOOH-CO2 system is considered a promising couple for a hydrogen storage system involving an ideal carbon-neutral cycle. Significant advancements have been achieved in the catalysts designed to catalyze the dehydrogenation of formic acid under mild reaction conditions, while much effort is still needed to catalyze the challenging CO2 hydrogenation reaction. The design of Pd-based carbon-supported heterogeneous catalysts for these reactions encompasses both the modulation of the properties of the active phase (particle size, composition, and electronic properties) and the modification of the supports by means of the incorporation of nitrogen functional groups. These approaches are herein summarized to provide a compilation of the strategies followed in recent studies and to set the basis for a hydrogen storage system attained using the HCOOH-CO2 couple.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Use of the Highscore Plus software for an easy and complete quantification of the anatase, brookite, rutile, and amorphous phase content in TiO2

  • El Koulali, Fatima
  • Ouzzine, Mohammed
  • Cano-Casanova, Laura
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
X-ray diffraction is usually used to characterize TiO2-based materials, but to determine the percentage of amorphous phase by simple calculations and tools is not so straightforward. The present study analyzes the use of the software Highscore Plus to perform a complete structural characterization of a large set of TiO2-materials, commercial and prepared in our laboratory by sol-gel and hydrothermal methodologies, to evaluate not only the crystalline phases content, but also the amorphous phase content. CaF2 is used as a reference material, and its crystallinity is assumed to be 100%. The comparison of the obtained results with those of the method developed in our research group by Cano-Casanova et al., based on the deconvolution of the XRD peaks of anatase, brookite, and rutile, have shown that the results of both methods are very similar, and Highscore Plus software can definitively be used for an easy determination of the amorphous phase content in titanium dioxide, even for materials with the three crystalline phases, rather overlapping peaks, and/or with a high amorphous phase content, which cannot be easily characterized by the method by Cano-Casanova el al. Thus, amorphous phase contents ranging from 5-51% are obtained with the Highscore Plus method, in contrast with 8-47% for the previously developed methodology. Our study has also highlighted the possibility of using the BET surface area of TiO2-based materials for an easy estimation of the percentage of amorphous phase.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Microwave-assisted synthesis of carbon-supported Pt nanoparticles for their use as electrocatalysts in the oxygen reduction reaction and hydrogen evolution reaction"

  • Jaimes-Paez, Cristian Daniel
  • Vences-Alvarez, Esmeralda
  • Salinas-Torres, David
  • Morallon, Emilia
  • Rangel-Mendez, José René
  • Cazorla-Amorós, Diego
  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Straightforward Synthesis Methodology for Obtaining Excellent ORR Electrocatalysts From Biomass Residues Through a One Pot-High Temperature Treatment Approach"

  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Pabón-Román, Keila Melissa|||/items/72dcae70-f639-4cf0-8a8f-ba0e2310eefb
  • Chinchilla, Lidia Esther
  • Calvino, Jose J.
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Establishing ZIF-8 as a reference material for hydrogen cryoadsorption: An interlaboratory study

  • Villajos, Jose A.
  • Balderas-Xicohtencatl, Rafael
  • Al Shakhs, Ali N.
  • Berenguer-Murcia, Ángel
  • Buckley, Craig E.
  • Cazorla-Amorós, Diego
  • Charalambopoulou, Georgia
  • Couturas, Fabrice
  • Cuevas, Fermin
  • Fairen-Jimenez, David
  • Heinselman, Karen N.
  • Humphries, Terry D.
  • Kaskel, Stefan
  • Kim, Hyunlim
  • Marco Lozar, Juan Pablo
  • Oh, Hyunchul
  • Parilla, Philip
  • Paskevicius, Mark
  • Senkovska, Irena
  • Shulda, Sarah
  • Silvestre-Albero, Joaquín
  • Steriotis, Theodore
  • Tampaxis, Christos
  • Hirscher, Michael
  • Maiwald, Michael
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Hydrogen storage by cryoadsorption on porous materials has the advantages of low material cost, safety, fast kinetics, and high cyclic stability. The further development of this technology requires reliable data on the H2 uptake of the adsorbents, however, even for activated carbons the values between different laboratories show sometimes large discrepancies. So far no reference material for hydrogen cryoadsorption is available. The metal-organic framework ZIF-8 is an ideal material possessing high thermal, chemical, and mechanical stability that reduces degradation during handling and activation. Here, we distributed ZIF-8 pellets synthesized by extrusion to 9 laboratories equipped with 15 different experimental setups including gravimetric and volumetric analyzers. The gravimetric H2 uptake of the pellets was measured at 77 K and up to 100 bar showing a high reproducibility between the different laboratories, with a small relative standard deviation of 3–4 % between pressures of 10–100 bar. The effect of operating variables like the amount of sample or analysis temperature was evaluated, remarking the calibration of devices and other correction procedures as the most significant deviation sources. Overall, the reproducible hydrogen cryoadsorption measurements indicate the robustness of the ZIF-8 pellets, which we want to propose as a reference material.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Nitrogen sites prevail over textural properties in N-doped carbons for the oxygen reduction reaction

  • Quílez-Bermejo, Javier
  • Pérez-Rodríguez, Sara
  • Torres, Daniel
  • Canevesi, Rafael L.S.
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Celzard, Alain
  • Fierro, Vanessa
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Nitrogen-doped carbon-based electrodes are among the most promising alternatives to platinum-based electrodes in the cathode of fuel cells and metal-air batteries, where the oxygen reduction reaction (ORR) takes place. Among the approaches for improving ORR activity, nitrogen functionalities and well-developed textural properties have proved very effective. Nonetheless, the question of which between nitrogen active sites or textural properties are more crucial in N-doped carbon materials remains unanswered. This work proposes a comparative and critical approach through the selective functionalization of four commercial activated carbons with different textural properties. This study highlights the greater importance of N-doping in relation to the textural properties of carbon materials, and provides fundamental insights for conclusively addressing the ongoing debate within the carbon community about the significance of these two factors in the context of ORR.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A comprehensive review of lipase-catalyzed acidolysis as a method for producing structured glycerides

  • Tacias-Pascacio, Veymar G.
  • Abellanas-Perez, Pedro
  • Andrades, Diandra de
  • Tavano, Olga Luisa
  • Mendes, Adriano A.
  • Berenguer-Murcia, Ángel
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
The production of structured lipids is a current trend in food technology in order to enhance the properties of fats and oils. Lipases have been utilized in many instances for this purpose, in most examples in an immobilized form. In this review, after discussing the different strategies to produce artificial lipids using lipases (esterification, transesterification, interesterification), we have focused on acidolysis. The reaction commences with hydrolysis at one position of the triglyceride molecule and is followed by the esterification between the released hydroxyl group and the target fatty acid (although other carboxylic acids can be used, such as phenolic acid derivatives). This means that water plays a double role, as substrate in the first step and as an undesired by-product in the second one. Therefore, the control of water activity becomes critical in these reactions. This review discusses the advantages, possibilities and drawbacks of this strategy to produce tailor-made designed lipids, summarizing many of the papers related to this strategy. The summarized results show the complexity of this reaction that can make the understanding and reproducibility of the reactions complex if there are no strict controls of all parameters determining the final yields.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Fast kinetics of BPA adsorption onto biomass based activated carbons (ACs): Mechanism of adsorption and economic advantage

  • Inyinbor, Adejumoke A.
  • Vega-Ramírez, Emerson
  • Chaparro-Garnica, Jessica
  • Cazorla-Amorós, Diego
  • Vega-Ramírez, Emerson|||/items/c3145885-15f9-4c82-91c7-9d5e79ab8083
  • Chaparro-Garnica, Jessica|||/items/ef0cb7bf-ab19-4397-9276-686b1829395e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
African melon waste, a sustainable material was employed for the preparation of highly porous Activated carbons (ACs). ACs preparation from African melon waste followed H3PO4 activation and varying thermal treatment. Prepared ACs were characterized and used for Bisphenol A (BPA) adsorption. Scalability and time dependent cost effectiveness analyses were used to validate the economic advantage of the prepared ACs over Commercial Activated Carbon (CAC). The porosity analysis by N2 adsorption Isotherm at -196 °C on the prepared ACs gave BET surface area ranging between 1455 and 1645 m2/g. The X-ray Photoelectron Spectroscopy (XPS) and Fourier Transformed Infrared Spectroscopy (FTIR) analysis revealed that phosphorus containing functional groups were fixed successfully on the ACs surface. XRD analysis of the prepared ACs revealed an amorphous material. Variation in pH slightly alter BPA removal percentage between pH 2 and 8 while a decrease was observed at pH 10. ACs load and temperature positively alter BPA removal. A load of 0.04 g/L gave a total BPA removal with the exception of Unpulverized Melon Waste (UMW) treated with H3PO4 at 450 °C (UMW-450 °C) which gave 99.94% BPA removal. Kinetics of BPA adsorption onto the prepared ACs were very rapid with about 90% of the total quantity adsorbed at equilibrium occurring within the first ten minutes. In contrast, BPA adsorption kinetics using CAC was slow, with the adsorption time more than two orders of magnitude higher to attain the equilibrium. The Langmuir adsorption isotherm best fit the adsorption data of BPA onto the prepared ACs and CAC. The maximum monolayer adsorption capacities (qmax) for the prepared ACs ranged between 238.02 and 268.92 mg/g while for CAC was 90.11 mg/g. The scalability analysis showed that only 40.18 g of ACs is required for the treatment of a 500 L effluent while 172.79 g of CAC is required for the same volume treatment. The time dependent cost effectiveness analysis revealed that prepared ACs is about eight times cost effective compared with CAC. Therefore, prepared ACs can serve as a cheap and sustainable alternate adsorbent suitable for application in BPA utilizing industries.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Advancing Porous Carbons: Understanding the Importance of Surface Chemistry for the Energy–Environment Nexus

  • Ania, Conchi O.
  • Bandosz, Teresa J.
  • Cazorla-Amorós, Diego
  • Pereira, Manuel Fernando R.
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
This review intends, in a critical way, the comprehensive view of the importance of porous carbons surface chemistry for their applications in an energy–environment nexus. Surface chemistry is presented as a combination of functional heteroatom-containing groups, dopants, and structural defects. First, we briefly address carbon surface chemical environment and the methods of its modification and characterization, indicating their practical limitations. Then, the effects of surface chemistry on separation, catalysis, energy storage, sensing and microwave absorption are introduced. Besides a critical analysis of published findings on these topics, we also include our views on the advancement in the processes which rely on porous carbons surface chemistry, and identify strategic areas and directions that should deserve further attention. We focus on new findings and important original contributions to the field. Since the community of carbon researchers grows following the strategic application of these materials, the role of functional groups, dopants and structural defects in various cutting-edge applications is emphasized, showing the progress in the field and the evolution of findings. A clear determination of the effects of carbon surface is often a challenge since carbons porosity and the locations of specific bonds/sites/defects in the carbon texture provide nanoconfinement effects.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

One-step synthesis of MN4 molecular electrocatalysts assembled on different nanocarbon architectures for efficient oxygen reduction

  • Trigueros-Sancho, Alicia
  • Martínez-Sánchez, Beatriz
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
One-step dry ball-milling method was employed to prepare different electrocatalysts based on cobalt(II) or iron(II) phthalocyanines (CoPc and FePc, respectively) supported on commercial carbon materials (CNovel or a carbon black (Vulcan)), controlling the nominal metal content to 1 or 2 wt %. No pre-treatment (e.g., functionalization of the carbon support), solvent addition or post-processing steps (e.g., heat-treatment, acid-treatment, etc.) were required before, during or after the mechanochemical process. Different characterization techniques have been used to study the morphological, physicochemical and electrochemical properties of the synthesized materials. The as-prepared catalysts can be directly used without involving further procedure. Solid-state ball-milling strategy provides excellent contact of both components, which synergistically improved their electrocatalytic performance. Regarding the carbon materials, the adequate nanoarchitecture and surface chemistry of CNovel permits better distribution of metal phthalocyanines (MPc) compared to a carbon black. The FePc supported on CNovel shows excellent electrocatalytic activity for oxygen reduction reaction (ORR), in terms of good selectivity towards the 4-electron pathway, long-term stability and low overpotential in alkaline medium. This study opens new paths for a simple, scalable and cost-effective catalyst manufacturing through mechanochemistry that can be modulated by selecting the proper nanocarbon support and MPc/carbon ratio.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for: "H2 production by celulose photoreforming with TiO2-Cu photocatalysts bearing different Cu species"

  • Belda-Marco, Sergio
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
El fichero incluye los datos obtenidos del trabajo experimental que ha dado lugar a la publicación. El resumen del contenido de la misma es: TiO2-Cu photocatalysts (1 wt% Cu) containing different copper species have been prepared and used for the generation of hydrogen by photoreforming of cellulose (the major component of biomass) in water at room temperature using UV light. A positive effect of copper has been clearly observed, and the analysis of the role of the Cu species present shows that a mixture of Cu(I) and Cu(II) favors the process. Among the TiO2-Cu photocatalysts, the one prepared by a simple impregnation method and not heat-treated, which shows small and well dispersed copper species particles, gives the highest hydrogen production.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A review on lipase immobilization on hydrophobic supports incorporating systematic mapping principles

  • Guimarães, José Renato
  • Oliveira, Kaíque Souza Gonçalves Cordeiro
  • Gonçalves, Maria Carolina Pereira
  • Romanelli, João Paulo
  • Lopes, Laiane Antunes
  • Berenguer-Murcia, Ángel
  • Fernández Lafuente, Roberto
  • Tardioli, Paulo W.
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
A review of the literature covering research on the immobilization of lipases on hydrophobic supports was performed using systematic mapping (SM) concepts. This approach consists of a rigorous review methodology used to catalog evidence, identify gaps at the frontier of knowledge, unknown trends, and research groups. Our results showed a wide variety of available lipases, including commercial, wild-type and recombinant strains. However, the most commonly used lipases are lipases from Thermomyces lanuginosus (TLL), Candida rugosa (CRL) or Rhizomucor miehei (RML) and lipase B from Candida antarctica (CALB). A wide variety of supports with different degrees of hydrophobicity were identified and the supports activated with a layer of octyl or octadecyl groups were the most used. The advantages of lipase immobilization on these supports were discussed. Among them, the immobilization, purification, stabilization and hyperactivation of lipases in a single step stand up. Moreover, problems related to lipase immobilization by interfacial activation were highlighted (mainly enzyme release). Strategies to overcome these problems include immobilization on heterofunctional supports or intermolecular crosslinking of enzymes immobilized by physical and/or chemical agents. The possibility of increasing the capacity of supports by lipase multilayer immobilization was also discussed. Finally, the structure, distribution of the network and the frequency of co-occurrence between lipases and supports were elucidated to determine the possible hotspots and hitherto unexplored advancement in knowledge.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Catalytic nitrate reduction using a Pd-Cu catalysts supported on carbon materials with different porous structure

  • González, D.T.
  • Baeza, J.A.
  • Alemany Molina, Gabriel
  • Calvo, L.
  • Gilarranz, Miguel A.
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The properties of the materials used as catalysts significantly affect their performance in catalytic NO3- reduction with hydrogen in polluted drinking water. Most studies have focused on how the active phase influences reaction selectivity and minimizes undesired NH4+ generation; however, there is still no clear consensus on the role of pore structure. In this study, carbon materials with different surface properties were used as supports to synthesize tailored Pd-Cu catalysts, assessing the role of micro- and mesopores in catalyst activity and selectivity in relation to mass transfer. Catalysts with Pd-Cu loadings of 1–1 and 1.5–1 wt% were examined. Higher catalytic activity was observed in catalysts supported on materials with low micropore volume, as limited reagent accessibility to metal within micropores hindered their effectiveness. It was also demonstrated that selectivity to NH4+ increased with higher micropore volume and micropore contribution to surface area, attributed to an imbalance in reagent transfer. This imbalance led to a higher H/N ratio at active sites within micropores and a corresponding increase in pH.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Modulating the coordination environment and metal choice in carbon buckypapers supported metal phthalocyanines for enhanced electrocatalytic carbon dioxide reduction

  • Martínez-Sánchez, Beatriz
  • Singh-Morgan, Amrita
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
In the search of versatile electrocatalysts for the electrochemical reduction of carbon dioxide (CO2RR), different transition metal phthalocyanines (MPc, where M=Fe, Co, Ni and Cu) have been immobilized by an easy and scalable wet impregnation on carbon nanotubes (CNTs) in the form of buckypaper (BP). Both the nature of the metal and the surface chemistry of the carbon support were found to play a pivotal role in determining their CO2RR efficiency and selectivity. We disclose here a potentiodynamic strategy for the controlled surface modification of BP with N- and P-containing polymeric species as a simple heterogenization strategy for molecular catalysts, enabling to easily tune their electrocatalytic performance. Syngas (mixture of H2 and CO) was obtained as the main product from CO2RR using FePc, CoPc and NiPc as electrocatalysts on functionalized (BPf) or non-modified BP. In contrast, CuPc was found to mainly catalyze the hydrogen evolution reaction (HER), with small amounts of formate as the only CO2RR product. It is possible to modulate the H2/CO ratio in the final product through the appropriate selection of the metal in MPc, the modification of the coordination environment by the controlled functionalization of the carbon support and the adjustment of the operating conditions. In particular, H2/CO ratios in a range between 0.17 and 1.28 have been obtained with good stability during electrolysis. Among all the MPc studied, CoPc surfaced as the most promising candidate for the reduction of CO2 to CO and H2 production, a finding substantiated by computational studies highlighting the positive impact of phosphate ligands on CoPc. This strategy outlines the starting line of a potential route toward the controlled generation of CO2RR-related products.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article: "Evaluating H2 Production by Ultraviolet-Induced Water Splitting over (Cu or Ni)-TiO2 Nanoparticle Photocatalysts"

  • Bouchabou, Meryem
  • Rives López, Juan Manuel
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Rives López, Juan Manuel|||/items/42cfee2e-72f9-42d3-9936-9436d56a02fd
This study explores the surface modification of TiO2 P25 with nanosized copper (Cu) or nickel (Ni) for photocatalytic hydrogen production via water splitting. Photocatalysts with 1 or 5 wt % metal loadings were synthesized using a cost-effective impregnation method and were tested as-prepared (XM/P25) and after thermal reduction under hydrogen flow (XM/P25-r). Pre-calcination was omitted to simplify the synthesis. The characterization of the photocataysts revealed key physicochemical, optical, and electronic properties, including the surface distribution and oxidation states of metal species and their interaction with TiO2. TEM and EDS showed well-distributed metal species forming nanometric domains on the P25 surface. XPS and Auger spectroscopy allowed the identification of different metal oxidation states and species. After reduction, Cu0 and Ni0 phases coexisted with oxidized species, enhancing light absorption and reducing the electron–hole recombination, confirmed by UV–vis DRS and PL, respectively. Cu species seemed to exhibit stronger interaction with TiO2 than Ni ones. Photochemical results showed that only the thermally reduced photocatalysts led to immediate hydrogen production, highlighting the need for zero-valent metal species for an efficient hydrogen generation. 5Ni/P25-r and 5Cu/P25-r outperformed P25, achieving 331 and 284 μmol H2·gcat–1·h–1, respectively, compared to 261 μmol H2·gcat–1·h–1 for P25. Although in terms of hydrogen production 5Ni/P25-r slightly outperformed 5Cu/P25-r, the latter demonstrated greater stability, possibly due to the oxidation of Ni during the tests. As-prepared photocatalysts can be activated after extended UV irradiation; for instance, 5Cu/P25 starts producing hydrogen after 10 h of irradiation as a result of the in situ metal reduction, confirmed by the color change in the photocatalyst.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Self-Standing Carbon Fiber Electrodes Doped with Pd Nanoparticles as Electrocatalysts in Zinc–Air Batteries"

  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
  • García-Rollán, Miguel
  • García-Mateos, Francisco J.
  • Ruiz-Rosas, Ramiro
  • Rosas, Juana M.
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Exploring the Effects Behind the Outstanding Catalytic Performance of PdAg Catalysts Supported on Almond Shell-Derived Activated Carbon Towards the Dehydrogenation of Formic Acid

  • Riquelme-García, Paula
  • Chaparro-Garnica, Jessica
  • Navlani-García, Miriam
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Chaparro-Garnica, Jessica|||/items/ef0cb7bf-ab19-4397-9276-686b1829395e
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Riquelme-García, Paula|||/items/eaa40ff9-6931-43ac-9865-2c13ac4a77c9
In this work, highly efficient carbon-supported Pd-based catalysts for formic acid dehydrogenation were synthesized by a straightforward wet impregnation-reduction method. The carbon support was obtained from a biomass residue (almond shell) prepared via H3PO4-assisted hydrothermal carbonization (HTC) and thermal activation. This carbon support was doped with nitrogen groups to study the effect on the electronic properties and catalytic performance of the catalysts. Investigating the formation of PdAg alloys with varying Pd:Ag molar ratios resulted in catalysts exhibiting enhanced catalytic activity compared to monometallic Pd counterparts. Notably, the Pd1Ag0.5/NAS catalyst displayed outstanding catalytic performance, achieving an initial TOF of 1716 h-1 (calculated in the first 3 minutes of reaction and expressed per mole of Pd) and maintaining substantial activity over 6 consecutive reaction cycles. This work elucidates the successful synthesis of effective catalysts, emphasizing the influence of nitrogen doping and PdAg alloy composition on catalytic behavior and stability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Progress and perspectives in the electrochemical synthesis of carbon nanomaterials

  • Quílez-Bermejo, Javier
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Celzard, Alain
  • Fierro, Vanessa
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The synthesis of carbon materials traditionally relies on energy-intensive processes that often involve high-temperature treatments of carbon-rich precursors derived from fossil fuels. These methods pose significant environmental challenges, making it imperative to develop more sustainable and cost-effective alternatives. Recent advances in electrochemical synthesis offer a promising pathway for the production of carbon nanomaterials using milder conditions and renewable feedstock, such as biomass and small organic molecules. Inspired by the current surge in interest in the C–C coupling reactions in the electrochemical CO2 reduction reaction, researchers have begun to explore the potential of electrochemical methods for the synthesis of carbon nanomaterials. This comprehensive review consolidates key findings in electrochemical carbon science, focusing on methodologies such as electrochemical functionalization, graphite exfoliation, molten salt-assisted carbonization, and the electrochemical conversion of small organic molecules. By highlighting the synergistic potential between electrochemistry and carbon science, this review aims to provide new insights and a foundational framework for advancing sustainable carbon nanomaterial synthesis, contributing to the development of future renewable energy technologies.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for: "Direct cost-efficient hydrothermal conversion of Amazonian lignocellulosic biomass residue"

  • Azar, Fatima Zahra
  • El Kasmi, Achraf
  • Cruz Jr., Orlando F.
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
Datos de investigación que han permitido escribir el artículo identificado con el doi https://doi.org/10.1007/s13399-023-04045-8
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Efficient biomass-derived catalysts for alkaline short-chain alcohols electroreforming: A focus on low platinum loading

  • Alemany Molina, Gabriel
  • Mosca, Erminia
  • Lo Vecchio, Carmelo
  • Aricò, Antonino Salvatore
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Baglio, Vincenzo
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Materials based on low Pt content have been exhaustively studied as hydrogen evolution reaction (HER) electrocatalysts. However, the study of these materials for electroreforming applications is limited because of the low methanol tolerance of Pt. Furthermore, the preparation methods usually imply several synthesis steps that put a brake on the production scaling up. In this work, an electrocatalyst prepared by a one-pot approach from a biomass residue (almond shells) based on Pt-Fe nanoparticle alloys is proposed as an efficient cathode catalyst for methanol electroreforming. The characterization of the material showed the formation of homogeneously distributed nanoparticles and a high volume of mesopores. Although the performance compared to a Pt/C cathode (∼0.5 mg Pt cm−2) at 30 °C was lower, the current reached at 0.9 V at 60 °C was equivalent using lower Pt loading (∼0.1 mg Pt cm−2). A 30 h durability test indicated high degradation for Pt/C because of agglomeration while no important modifications were detected for the biomass-derived material.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for: "Optimization of Active Sites in TiO2–Cu Photocatalysts for H2 Generation via Cellulose Photo-Reforming"

  • Belda-Marco, Sergio
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
En el fichero se incluyen los datos del trabajo experimental que han permitido escribir el artículo, el resumen de cuyo contenido se indica a continuación: The study pursues the optimization of active sites in TiO2-based photocatalysts modified with copper for hydrogen production via cellulose photo-reforming. Copper was incorporated, by impregnation, in the commercial titania P25 and in hydrothermally synthesized TiO2 which has a larger surface area and contains only anatase. The hydrothermal synthesis method was also employed for the one-pot preparation of TiO2–Cu photocatalysts. The effect of the copper loading was investigated in the three series of samples. Characterization techniques, including XPS, XRD, UV–vis, and PL spectroscopy, confirmed structural and electronic modifications induced by Cu incorporation, which would directly influence the photocatalytic efficiency. The activity tests demonstrated a significant enhancement in H₂ evolution upon Cu loading, being the photocatalysts prepared by the one-pot method the most active ones for hydrogen generation, with the highest H2/CO2 ratio and leading to the highest concentration of sugars and organic acids in solution, compared with the catalysts prepared by impregnation. The superior performance of these photocatalysts has been attributed to their increased surface area that allows a higher Cu loading with optimised distribution of active sites. In particular, the catalysts with 3 wt% Cu is the one exhibiting the highest efficiency, producing 2752 µmol·h⁻¹·gcat⁻¹, and being recyclable.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

The role of oxygen heteroatoms in the surface (electro)chemistry of carbon materials

  • Alemany Molina, Gabriel
  • Martínez-Sánchez, Beatriz
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Engineering the surface chemistry of carbon-based materials is of crucial importance in tuning their intrinsic properties, including electrical conductivity, wettability, electroactivity, adsorption potential, reactivity, physical and chemical stability. Intense research has recently focused on understanding the role of surface oxygen functional groups when carbon materials are in contact with an electrolyte or solvent in order to tailor and improve them for technological applications. For this purpose, their synthesis method and/or further oxidation treatments should be carefully selected, since they can substantially influence not only the oxygen content, but also the nature of the oxygen moieties, which could be decisive in determining the surface properties of the resulting material. The combined use of different chemical, spectroscopic and electrochemical techniques, provides unique and reliable information about the contribution of a specific oxygen-containing group in the surface (electro)chemistry of carbon-based materials. This paper provides a discussion of the role of oxygen heteroatoms in the surface electrochemistry of a carbon material as they relate to their influence on both its electroactivity and reactivity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Self-Standing Carbon Fiber Electrodes Doped with Pd Nanoparticles as Electrocatalysts in Zinc–Air Batteries

  • Jaimes-Paez, Cristian Daniel
  • García-Rollán, Miguel
  • García-Mateos, Francisco J.
  • Ruiz-Rosas, Ramiro
  • Rosas, Juana M.
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
In this work, the effect of the palladium precursor on the Oxygen Reduction Reaction (ORR) performance of lignin-based electrospun carbon fibers was studied. The fibers were spun from a lignin-ethanol solution free of any binder, where different Pd salts were added at two concentration levels. The system implemented to perform the spinning was a coaxial setup in which the internal flow contains the precursor dispersion with the metallic precursor, and ethanol was used as external flow to help fiber formation and prevent drying before generating the Taylor cone. The obtained cloths were thermostabilized in air at 200 °C and carbonized in nitrogen at 900 °C. The resulting carbon fibers were characterized by physicochemical and electrochemical techniques. The palladium precursor significantly affects nanoparticle distribution and size, fiber diameter, pore distribution, surface area and electrochemical behavior. The fibers prepared with palladium acetylacetonate at high Pd loading and carbonized at 900 °C under a CO2 atmosphere showed high mechanical stability and the best ORR activity, showing near total selectivity towards the 4-electron path. These features are comparable to those of the commercial Pt/C catalyst but much lower metal loading (10.6 wt.% vs. 20 wt.%). The most promising fibers have been evaluated as cathodes in a zinc–air battery, delivering astonishing stability results that surpassed the performance of commercial Pt/C materials in both charging and discharging processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Can hydrogen be generated by UV- photodegradation of biomass residues in water media?

  • Bouchabou, Meryem
  • Brocani-Pasino, Stephanie Araceli
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
The photoinduced processes can be promising routes for hydrogen generation. This study explores hydrogen production through the non-catalyzed photodegradation of various biomass materials, a process that remains largely understudied compared to the catalyzed ones, i.e., photoreforming. Using as precursor almond shell (AS), a lignocellulosic biomass residue, various solid and liquid materials obtained from it were tested as substrates. These materials were obtained through different pretreatment methods including grinding, milling, pyrolysis, and hydrothermal carbonization (HTC), and compared with milled cellulose (MC). Photodegradation tests, conducted in aqueous media under UV light, revealed that hydrogen production strongly depends on the structural and compositional features of the substrates. Among the solid samples, ground almond shell (GAS) and milled cellulose (MC) showed promising hydrogen yields. However, the liquid residue from the HTC process using diluted phosphoric acid (HMAS-L2), which is rich in simple organic acids, stood out, delivering the highest hydrogen production across all the substrates, and reaching an impressive value of 105 μmol of H2 in 5 h of reaction. Attention was also given to the production of other gases, particularly carbon dioxide and methane, as a result of the photodegradation. CO2 production occurred for all the substrates. PMAS (the pyrolyzed milled almond shell) and, specifically, HMAS-L2 generated detectable amounts of CH4 (5 and 22 μmol, respectively). The H2/CO2 ratios reached 0.66 for MC and 0.44 for HMAS-L2, highlighting the interest in evaluating the non-catalyzed biomass photodegradation as a preliminary step for future photoreforming studies. These findings enhance our understanding of biomass-based hydrogen generation and open new avenues for exploring non-catalyzed photoinduced processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Production of H2 and organic acids by cellulose photo-reforming with TiO2-bimetallic(CuNi) co-catalysts: Metal loading and photodeposition sequence effects

  • Belda-Marco, Sergio
  • Ayala, Pablo
  • Nagaraju Myakala, Stephen
  • Eder, Dominik
  • Lillo-Rodenas, Maria Angeles
  • Cherevan, Alexey
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
Cellulose photo-reforming using TiO2 modified with non-noble metals as photocatalysts to produce hydrogen and organic acids via the valorization of lignocellulosic residues is an attractive strategy towards renewable energy. Non-noble metals such as Cu and Ni photodeposited on commercial TiO2 play an important role as mono or bimetallic co-catalysts that strongly improve the photo-reforming of cellulose producing both H2 and valuable organic acids in solution. In this study, preparation variables like the total metal loading (nominal 1 and 5 wt%, with a weight ratio Cu:Ni = 1:1) and different Cu-Ni photodeposition sequence (consecutive (first Cu and then Ni and vice versa), or simultaneous) were studied, resulting in a set of twelve photocatalysts. All the metal-loaded photocatalysts exhibit enhanced H2 production with respect to bare TiO2 with total H2 generation and product selectivity influenced by the metal content, the interaction between both metals, and the state of the deposited species. The last two properties have shown to be highly dependent on the photodeposition sequence. The higher metal loadings lead to the less active photocatalysts, mainly attributed to an excessive coverage of the TiO2 surface. Notably, the stepwise incorporation of Cu and Ni leads to more active photocatalysts than the simultaneous photodeposition. The photocatalyst with 1 wt% metal loading prepared via sequential NiCu deposition provides the highest hydrogen generation, 489 μmol/h · gcat. This value is among the highest reported up to now for noble-metal-free photocatalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Microwave-assisted synthesis of carbon-supported Pt nanoparticles for their use as electrocatalysts in the oxygen reduction reaction and hydrogen evolution reaction

  • Jaimes-Paez, Cristian Daniel
  • Vences-Alvarez, Esmeralda
  • Salinas-Torres, David
  • Morallon, Emilia
  • Rangel-Mendez, José René
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
Pt nanoparticles were incorporated on carbon black (Vulcan XC-72R) and an activated carbon (F400) using a fast and efficient microwave method. For the preparation, a Pt solution was contacted with the corresponding carbon sample and heated up to 110°C in a microwave oven using an optimised heating rate. TEM images revealed that the carbon-supported Pt nanoparticles had a small average particle size and high dispersion. These Pt-based electrocatalysts showed both high electrocatalytic activity and selectivity towards the 4-electron pathway for the oxygen reduction reaction (ORR) in acid and alkaline media. In addition, they presented excellent stability and resistance to CO poisoning. Moreover, the as-prepared electrocatalysts exhibited outstanding electrocatalytic behaviour for the hydrogen evolution reaction (HER). It should be highlighted that, even though our Pt-based electrocatalysts have much lower loadings than that of the commercial Pt/C sample (used as reference), the electroactive surface areas of as-prepared electrocatalysts were higher compared to the reference electrocatalyst. Such small and well-dispersed Pt NPs with an enhanced electroactive surface area and strong interaction with the carbon support, led to an improvement of the current density normalised by Pt loading (A gPt−1).
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Use of the Highscore Plus software for an easy and complete quantification of the anatase, brookite, rutile, and amorphous phase content in TiO2"

  • El Koulali, Fatima
  • Ouzzine, Mohammed
  • Cano-Casanova, Laura
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
The folder includes the characterization data of the materials that made it possible to write the article, a summary of whose content is provided next: X-ray diffraction is used to characterize the crystalline composition of TiO2-based materials, but to determine the percentage of amorphous phase by simple calculations and tools is not straightforward. The present study analyzes the use of the software HighScore Plus to perform a complete structural characterization of a large set of TiO2-materials, commercial and prepared in our laboratory by sol-gel and hydrothermal methodologies. The aim is to evaluate not only the crystalline phases content, but also the amorphous phase content. CaF2 is used as a reference material, and its crystallinity is assumed to be 100 %. The comparison of the results obtained with the software HighScore Plus with those of the method developed in our research group by Cano-Casanova et al., based on the deconvolution of the XRD peaks of anatase, brookite, and rutile, has shown that the results of both methods are very similar, and the HighScore Plus software can definitively be used for an easy determination of the amorphous phase content in titanium dioxide, even for materials with the three crystalline phases, rather overlapping peaks, and/or with a high amorphous phase content, which cannot be easily characterized by the method by Cano-Casanova el al. Thus, amorphous phase contents in the 5-51 % range are obtained with the HighScore Plus method, in contrast with 8–47 % for the previously developed methodology. Our study has also highlighted the possibility of using the BET surface area of TiO2-based materials for an easy estimation of the percentage of amorphous phase.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Exploring the Effects Behind the Outstanding Catalytic Performance of PdAg Catalysts Supported on Almond Shell-Derived Activated Carbon Towards the Dehydrogenation of Formic Acid"

  • Riquelme-García, Paula
  • Chaparro-Garnica, Jessica
  • Navlani-García, Miriam
  • Cazorla-Amorós, Diego
  • Chaparro-Garnica, Jessica|||/items/ef0cb7bf-ab19-4397-9276-686b1829395e
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Riquelme-García, Paula|||/items/eaa40ff9-6931-43ac-9865-2c13ac4a77c9
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Optimization of Active Sites in TiO2–Cu Photocatalysts for H2 Generation via Cellulose Photo-Reforming

  • Belda-Marco, Sergio
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
The study pursues the optimization of active sites in TiO2-based photocatalysts modified with copper for hydrogen production via cellulose photo-reforming. Copper was incorporated, by impregnation, in the commercial titania P25 and in hydrothermally synthesized TiO2 which has a larger surface area and contains only anatase. The hydrothermal synthesis method was also employed for the one-pot preparation of TiO2–Cu photocatalysts. The effect of the copper loading was investigated in the three series of samples. Characterization techniques, including XPS, XRD, UV–vis, and PL spectroscopy, confirmed structural and electronic modifications induced by Cu incorporation, which would directly influence the photocatalytic efficiency. The activity tests demonstrated a significant enhancement in H₂ evolution upon Cu loading, being the photocatalysts prepared by the one-pot method the most active ones for hydrogen generation, with the highest H2/CO2 ratio and leading to the highest concentration of sugars and organic acids in solution, compared with the catalysts prepared by impregnation. The superior performance of these photocatalysts has been attributed to their increased surface area that allows a higher Cu loading with optimised distribution of active sites. In particular, the catalysts with 3 wt% Cu is the one exhibiting the highest efficiency, producing 2752 µmol·h⁻¹·gcat⁻¹, and being recyclable.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Proteases immobilized on nanomaterials for biocatalytic, environmental and biomedical applications: Advantages and drawbacks

  • Bilal, Muhammad
  • Qamar, Sarmad Ahmad
  • Carballares, Diego
  • Berenguer-Murcia, Ángel
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Proteases have gained significant scientific and industrial interest due to their unique biocatalytic characteristics and broad-spectrum applications in different industries. The development of robust nanobiocatalytic systems by attaching proteases onto various nanostructured materials as fascinating and novel nanocarriers has demonstrated exceptional biocatalytic performance, substantial stability, and ease of recyclability over multiple reaction cycles under different chemical and physical conditions. Proteases immobilized on nanocarriers may be much more resistant to denaturation caused by extreme temperatures or pH values, detergents, organic solvents, and other protein denaturants than free enzymes. Immobilized proteases may present a lower inhibition. The use of non-porous materials in the immobilization prevents diffusion and steric hindrances during the binding of the substrate to the active sites of enzymes compared to immobilization onto porous materials; when using very large or solid substrates, orientation of the enzyme must always be adequate. The advantages and problems of the immobilization of proteases on nanoparticles are discussed in this review. The continuous and batch reactor operations of nanocarrier-immobilized proteases have been successfully investigated for a variety of applications in the leather, detergent, biomedical, food, and pharmaceutical industries. Information about immobilized proteases on various nanocarriers and nanomaterials has been systematically compiled here. Furthermore, different industrial applications of immobilized proteases have also been highlighted in this review.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Carbon supported Ru, Ni and RuNi catalysts for the transformation of levulinic acid to γ-valerolactone. Activity of carbon metal-free samples and mechanistic insight based on the redox properties of the oxygen surface groups"

  • Tane, Elena Georgiana|||/items/45998146-5019-4a50-a12f-43cf5211e86c
  • Ruiz-Bernal, Zaira
  • López-Serrano, Celia
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
The file includes the data used to prepare the scientific article indicated.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

g-C3N4-Based Direct Z-Scheme Photocatalysts for Environmental Applications

  • Fernández-Catalá, Javier
  • Greco, Rossella
  • Navlani-García, Miriam
  • Cao, Wei
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
Photocatalysis represents a promising technology that might alleviate the current environmental crisis. One of the most representative photocatalysts is graphitic carbon nitride (g-C3N4) due to its stability, cost-effectiveness, facile synthesis procedure, and absorption properties in visible light. Nevertheless, pristine g-C3N4 still exhibits low photoactivity due to the rapid recombination of photo-induced electron-hole (e−-h+) pairs. To solve this drawback, Z-scheme photocatalysts based on g-C3N4 are superior alternatives since these systems present the same band configuration but follow a different charge carrier recombination mechanism. To contextualize the topic, the main drawbacks of using g-C3N4 as a photocatalyst in environmental applications are mentioned in this review. Then, the basic concepts of the Z-scheme and the synthesis and characterization of the Z-scheme based on g-C3N4 are addressed to obtain novel systems with suitable photocatalytic activity in environmental applications (pollutant abatement, H2 production, and CO2 reduction). Focusing on the applications of the Z-scheme based on g-C3N4, the most representative examples of these systems are referred to, analyzed, and commented on in the main text. To conclude this review, an outlook of the future challenges and prospects of g-C3N4-based Z-scheme photocatalysts is addressed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Zeolite@Metal-organic framework core-shell synthesized from the aluminum of the zeolite with accessible internal surface for CO2 adsorption

  • Güemes, Lucas
  • Navarro, Marta
  • Cacho-Bailo, Fernando
  • Jaimes-Paez, Cristian Daniel
  • Cazorla-Amorós, Diego
  • Téllez, Carlos
  • Coronas, Joaquín
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
Combining the rigid microporosity of zeolites with the more versatile structures of metal–organic frameworks (MOFs) seeks to obtain a synergistic effect of both materials. Starting from a low cost and industrially produced zeolite, as it is zeolite NaA (with the LTA type structure), we show that it is possible to crystallize a MOF as shell onto it by only using an aqueous solution of terephthalic acid (H2BDC). Unlike other zeolite-MOF hybrids reported in the literature, the crystallized MOF only uses the aluminum from the zeolite and may share in turn some aluminum atoms with the inorganic zeolite core, therefore it consists solely of zeolitic Al and BDC. Depending on the pretreatment of the zeolite and the synthesis conditions (pH, time, linker ratio), the crystalline zeolite core is maintained or converted into an amorphous aluminosilicate. Thus, it is possible to retain a part of the adsorption properties of the parent zeolite without degrading its structure through the two fundamental strategies of pH control and previous calcination of the zeolite. The resulting core–shell material, designated as LTA@Al-BDC, combines the zeolite microporosity and molecular sieving properties with the MOF that crystallizes as high aspect ratio sheets which, together with its hydrophobicity, favors the contact with polymeric materials. In addition, being zeolite 4A (NaA) affinity towards CO2 been probed, the resulting LTA@Al-BDC material constitutes a prominent candidate towards CO2 separation.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Exploring the effect of surface chemistry and particle size of boron-doped diamond powder as catalyst and catalyst support for the oxygen reduction reaction"

  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Martínez-Sánchez, Beatriz
  • Gabe, Atsushi
  • Kondo, Takeshi
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

H2 production by cellulose photoreforming with TiO2-Cu photocatalysts bearing different Cu species

  • Belda-Marco, Sergio
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
TiO2-Cu photocatalysts (1 wt.% Cu) containing different copper species have been prepared and used for the generation of hydrogen by photoreforming of cellulose (the major component of biomass) in water at room temperature, using UV light. A positive effect of copper has been clearly observed, and the analysis of the role of the Cu species present shows that a mixture of Cu(I) and Cu(II) favours the process. Among the TiO2-Cu photocatalysts, the one prepared by a simple impregnation method and not heat-treated, which shows small and well dispersed copper species particles, gives the highest hydrogen production.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for: "Production of H2 and organic acids by cellulose photo-reforming with TiO2-bimetallic(CuNi) co-catalysts: Metal loading and photodeposition sequence effects"

  • Belda-Marco, Sergio
  • Ayala, Pablo
  • Nagaraju Myakala, Stephen
  • Eder, Dominik
  • Lillo-Rodenas, Maria Angeles
  • Cherevan, Alexey
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
La carpeta incluye los datos de caracterización de catalizadores y actividad catalítica que han permitido escribir el artículo, el resumen de cuyo contenido se indica a continuación: Cellulose photo-reforming using TiO2 modified with non-noble metals as photocatalysts to produce hydrogen and organic acids via the valorization of lignocellulosic residues is an attractive strategy towards renewable energy. Non-noble metals such as Cu and Ni photodeposited on commercial TiO2 play an important role as mono or bimetallic co-catalysts that strongly improve the photo-reforming of cellulose producing both H2 and valuable organic acids in solution. In this study, preparation variables like the total metal loading (nominal 1 and 5 wt%, with a weight ratio Cu:Ni = 1:1) and different Cu-Ni photodeposition sequence (consecutive (first Cu and then Ni and vice versa), or simultaneous) were studied, resulting in a set of twelve photocatalysts. All the metal-loaded photocatalysts exhibit enhanced H2 production with respect to bare TiO2 with total H2 generation and product selectivity influenced by the metal content, the interaction between both metals, and the state of the deposited species. The last two properties have shown to be highly dependent on the photodeposition sequence. The higher metal loadings lead to the less active photocatalysts, mainly attributed to an excessive coverage of the TiO2 surface. Notably, the stepwise incorporation of Cu and Ni leads to more active photocatalysts than the simultaneous photodeposition. The photocatalyst with 1 wt% metal loading prepared via sequential NiCu deposition provides the highest hydrogen generation, 489 μmol/h · gcat. This value is among the highest reported up to now for noble-metal-free photocatalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Exploring Pt-Impregnated CdS/TiO2 Heterostructures for CO2 Photoreduction

  • García-Santos, Lidia
  • Fernández-Catalá, Javier
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
  • García-Santos, Lidia|||/items/f1c64d7a-c224-4df9-8b4a-1b83259628c2
This work focuses on the production of methane through the photocatalytic reduction of carbon dioxide using Pt-doped CdS/TiO2 heterostructures. The photocatalysts were prepared using P25 commercial titania and CdS synthesized through a solvothermal methodology, followed by the impregnation of Pt onto the surface to enhance the physicochemical properties of the resulting photocatalysts. The pure and heterostructure-based materials were characterized using X-ray diffraction (XRD), inductively coupled plasma optical emission spectroscopy (ICP-OES), scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible spectroscopy (UV-Vis), ultraviolet photoelectron spectroscopy (UPS), and photoluminescence spectroscopy (PL). The obtained results show the successful synthesis of the heterostructure impregnated with Pt. Moreover, the observed key role of CdS and Pt nanoparticles in the final semiconductor is to reduce the electron-hole pair recombination rate by acting as an electron sink, which slows down the recombination process and increases the photocatalyst efficiency. Thus, Pt-doped CdS/TiO2 heterostructures with the best observed composition presents better catalytic activity than P25 titania with methane production values being 460 and 397 µmol CH4/g·h, respectively.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

In-situ synthesis of encapsulated N-doped carbon metal oxide nanostructures for Zn-air battery applications

  • Flores-Lasluisa, Jhony Xavier
  • García-Rodríguez, Mario
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
La, Mn and Co-based materials with diverse compositions encapsulated in N-doped carbon materials were synthesized by an in-situ sol-gel method. The as-prepared materials were physically activated with CO2 giving as a result composites with excellent performance for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The composites were characterized by different physicochemical techniques revealing the importance of porosity created by CO2 activation. This crucial step increases the number of accessible active sites such as Co-Nx-C sites, Co/MnO heterointerfaces and graphitic N groups. Moreover, the formation of La2O2CO3 was detected to enhance electrical conductivity and electrochemical performance and it is active for ORR. Although the composite containing La, Mn and Co has less concentration of the highly active sites, its small particle size favour a better distribution of these sites. The Co-containing composites were tested as air-electrodes in a Zn-air battery and compared to commercial electrocatalysts. All composites showed a better operation in terms of higher cyclability and higher energy density which is a consequence of metal nanostructures encapsulation in N-doped porous carbon shells. Interestingly, the pure Co-based composite showed an outstanding performance related to the high concentration of the Co-Nx-C active sites that provide high activity and stability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Pd Catalysts Based on C3N4-Modified Activated Carbon Derived from Biomass Residues for the Dehydrogenation of Formic Acid

  • Bernal-Vela, María
  • Navlani-García, Miriam
  • Cazorla-Amorós, Diego
  • Bernal-Vela, María|||/items/bc8b62c6-4a07-42d8-bb19-9badbde5f5aa
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
Formic acid has recently been considered one of the most promising liquid organic hydrogen carriers (LOHCs). Its decomposition to obtain H2 has been fruitfully investigated during recent years using catalysts of a very diverse nature. Most of these catalysts lack stability, so finding stable materials under reaction conditions is highly desirable but challenging. In the present study, catalysts based on Pd nanoparticles supported on C3N4-modified activated carbon derived from biomass residues were developed, characterized, and assessed in the decomposition of formic acid in the liquid phase. These catalysts were prepared using a straightforward method that allowed different nitrogen contents to be achieved in the support and avoided the ex situ reduction in the Pd precursor. The results of the catalytic tests indicated the positive role of incorporating C3N4, leading to catalysts that displayed much better performance than the C3N4-free counterpart. The incorporation of C3N4 resulted in catalysts with small and well-distributed Pd nanoparticles, leaching resistance and modified electronic properties of the Pd species. As a result, promising catalytic activity was observed in the developed materials. Pd/AC_C3N4(19) attained an initial TOF of 2893 h−1, and it preserved most of its catalytic activity for at least six consecutive reaction cycles, which is a remarkable characteristic of the developed catalytic system.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Efficient and labor-saving Ru/C catalysts for the transformation of levulinic acid into γ-valerolactone under mild reaction conditions

  • Ruiz-Bernal, Zaira
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
Ru/C catalysts for the transformation of levulinic acid into gamma-valerolactone have been prepared using carbon materials with different textural and chemical properties, and morphology. In the mild reaction conditions used (70 °C, 15 bar H2, 1 h), all the reduced catalysts are active and selective, with similar behavior independently of the support's properties. Surprisingly, the un-reduced (as prepared) catalysts show also catalytic activity, which varies (from moderate to high) with the carbon support type, indicating that an in situ (under reaction) reduction process takes place. The catalysts prepared with the supports of lower surface chemistry are almost as active as their reduced counterparts, whereas those prepared with rich surface chemistry supports are noticeably less active, but become activated in consecutive runs. The size of the developed Ru particles depends on the reduction conditions (i.e., reduction treatment at 250 °C or reaction conditions) and is highly influenced by the support's surface chemistry, which determines the metal–support interaction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Carbon-Driven Enhancement in Zinc Hexacyanoferrate Composites: A Ball-Milling Approach for High-Performance Zn-Ion Batteries

  • García-Rodríguez, Mario
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Toledo-Carrillo, Esteban A.
  • Dutta, Joydeep
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Transition to a sustainable energy future demands the development of alternative battery technologies beyond lithium-ion batteries, which are challenging for large-scale implementation due to inherent safety concerns and resource scarcity. Aqueous zinc-ion batteries (ZIBs) are a promising solution; however, improvement of the cathode is essential for their widespread adoption. This study investigates the structural modification of zinc hexacyanoferrate (ZnHCF) as cathode materials using ball-milling and the addition of carbon black (Vulcan XC-72R). The improved electroactivity is attributed to the phase transition from cubic to rhombohedral, the conversion of Prussian blue analogue to Prussian white analogue phases, and the synergistic effect produced by the presence of carbon material. These changes lead to the formation of [Fe(CN)6] vacancies, which draw water molecules into interstitial sites. Carbon material plays a crucial role in preserving the crystalline structure of ZnHCF and enhancing the electrochemical performance. The sample milled in presence of carbon material (BM-ZnHCF@C sample) demonstrates superior results compared to the samples unmilled and milled samples without carbon material, achieving a capacity close to 100 mAh g−1 at a current density of 0.5 A g−1. However, after 50 cycles, the capacity decreases by 53.3%, but is restored by replacing the Zn anode while retaining the same cathode. The zinc anode is the primary factor hindering the long-term performance of the assembled battery, as demonstrated by the evolution of the electrode potential over time in the ZIB using a T-type electrochemical cell.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Can hydrogen be generated by UV- photodegradation of biomass residues in water media?"

  • Bouchabou, Meryem
  • Brocani-Pasino, Stephanie Araceli
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
The photoinduced processes can be promising routes for hydrogen generation. This study explores hydrogen production through the non-catalyzed photodegradation of various biomass materials, a process that remains largely understudied compared to the catalyzed ones, i.e., photoreforming. Using as precursor almond shell (AS), a lignocellulosic biomass residue, various solid and liquid materials obtained from it were tested as substrates. These materials were obtained through different pretreatment methods including grinding, milling, pyrolysis, and hydrothermal carbonization (HTC), and compared with milled cellulose (MC). Photodegradation tests, conducted in aqueous media under UV light, revealed that hydrogen production strongly depends on the structural and compositional features of the substrates. Among the solid samples, ground almond shell (GAS) and milled cellulose (MC) showed promising hydrogen yields. However, the liquid residue from the HTC process using diluted phosphoric acid (HMAS-L2), which is rich in simple organic acids, stood out, delivering the highest hydrogen production across all the substrates, and reaching an impressive value of 105 μmol of H2 in 5 h of reaction. Attention was also given to the production of other gases, particularly carbon dioxide and methane, as a result of the photodegradation. CO2 production occurred for all the substrates. PMAS (the pyrolyzed milled almond shell) and, specifically, HMAS-L2 generated detectable amounts of CH4 (5 and 22 μmol, respectively). The H2/CO2 ratios reached 0.66 for MC and 0.44 for HMAS-L2, highlighting the interest in evaluating the non-catalyzed biomass photodegradation as a preliminary step for future photoreforming studies. These findings enhance our understanding of biomass-based hydrogen generation and open new avenues for exploring non-catalyzed photoinduced processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Deepening the Understanding of Carbon Active Sites for ORR Using Electrochemical and Spectrochemical Techniques"

  • Flores-Lasluisa, Jhony Xavier
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Fe-Nx biomass-derived carbon material as efficient cathode electrocatalyst for alkaline direct methanol fuel cells

  • Alemany Molina, Gabriel
  • Baglio, Vincenzo
  • Zignani, Sabrina Campagna
  • Aricò, Antonino Salvatore
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Lo Vecchio, Carmelo
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Biomass-derived carbon materials are emerging as potential alternatives to reduce the production cost and environmental impact of electrocatalysts production. This study aims to assess two catalysts based on Fe sites over N-doped carbon materials with different textural properties towards oxygen reduction reaction (ORR) for alkaline direct methanol fuel cell (ADMFC) applications. Almond shell (AS) residues and an activated carbon (KUA) were proposed as carbon precursors for the two Fe-N-C catalysts which were obtained by similar synthesis procedures and carbonized at 900 °C in a single high-temperature treatment. Although the activity and selectivity towards the ORR of both samples evaluated in a half-cell configuration were comparable, very different performances were observed in an ADMFC device. The membrane-electrode assembly (MEA) containing the biomass-derived carbon material at the cathode side showed a high-power density, comparable to a 40 wt% Pt/C at low methanol concentration (1 M). The performance of the MEAs containing the synthesized electrocatalysts was maintained or increased in a 5 M methanol solution while Pt/C-based MEA suffered depolarization for concentrations higher than 1 M. After a 100 h durability test, high power density was maintained with the Fe-N derived biomass electrocatalyst. This work provides a first approach of applying biomass-derived catalysts as cathodes for ADMFCs and challenges in terms of stability and performance are explored.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Removal of malachite green from water: Comparison of adsorption in a residue-derived AC versus photocatalytic oxidation with TiO2 and study of the adsorption-photocatalysis synergy

  • Boumad, Souad
  • Cano-Casanova, Laura
  • Román-Martínez, M. Carmen
  • Bouchenafa-Saib, Naima
  • Lillo-Rodenas, Maria Angeles
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
The literature rarely compiles studies devoted to removing pollutants in aqueous media comparing adsorption versus photocatalytic degradation and does not pay enough attention to the analysis of combined adsorption-photocatalytic oxidation processes. In the present manuscript, the removal of malachite green (MG) from aqueous solutions has been investigated in three different cheap and sustainable scenarios: i) adsorption on activated carbon (AC) derived from a residue, luffa cylindrica, ii) photocatalytic oxidation under simulated solar light using titanium dioxide (TP) and iii) combined adsorption-photocatalytic oxidation using TP-AC (70/30 wt/wt.) under simulated solar light. The study has revealed that in the three scenarios and studied conditions, the total removal of this endocrine-disrupting dye from the solution takes place in the assayed time, 2 h, although in some cases just in a few minutes. MG adsorption on the AC is the fastest removal method. MG photocatalytic oxidation with TP also occurs efficiently, although the oxidized MG is not totally mineralized. MG removal using the TP-AC composite under simulated solar light occurs at a rate comparable to that of the MG adsorption on AC, since adsorption is the dominating removal mechanism, more than 90% of the removed MG with TP-AC under simulated solar light is adsorbed in this carbon-containing composite. The obtained results highlight the interest in adsorption, being the selection of the most suitable removal method dependent on several factors (i.e., cost of the AC regeneration, if adsorption, or the toxicity of the intermediate oxidation species, if photooxidation). Paying attention to MG photooxidation with TiO2, comparison of two working photodegradation schemes shows that the direct photodegradation of MG from solution, avoiding any initial dark equilibrium period, is the more efficient option from a time perspective. The use of scavengers has proved that MG photodegradation occurs via an oxidation mechanism dominated by superoxide anion radicals.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Exploring the effect of surface chemistry and particle size of boron-doped diamond powder as catalyst and catalyst support for the oxygen reduction reaction

  • Alemany Molina, Gabriel
  • Martínez-Sánchez, Beatriz
  • Gabe, Atsushi
  • Kondo, Takeshi
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The interest for the electrodes based on conductive boron-doped diamond powder (BDDP) is increasing in recent years due to their excellent physical and chemical stability, the wide potential window in both aqueous and organic electrolytes, the relatively large specific surface area, and their versatility in comparison to boron-doped diamond thin film electrodes. These materials have been proposed as alternative cathode catalyst support due to their high corrosion resistance when subjected to the highly positive potentials originated during the start-stop operations in fuel cells, especially in automobiles. In this work, we present three BDDP supports with different particle sizes and different surface oxygen contents as supports of different iron species for oxygen reduction reaction in alkaline solution. BDDP supports were modified with carbon nitride (C3N4) or phthalocyanines (Pc) as anchoring points for iron. The different electrocatalytic performance observed confirmed the strong influence of the surface chemistry of the BDDP supports on the activity of the metallic sites for FePc samples while, for Fe-C3N4 samples, the determining effect was the particle size of the BDDP support. Additionally, DFT calculations were used to obtain some insights about the interaction of the FePc with the diamond surface.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Efficient and selective glycerol electrolysis for the co-production of lactic acid and hydrogen with multi-component Pt/C-zeolite catalyst

  • Aslam, Muhammad
  • Navlani-García, Miriam
  • Cazorla-Amorós, Diego
  • Luo, Hui
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
Among various electrochemical reactions to produce fuels and chemicals, glycerol electrolysis to co-produce hydrogen and lactic acid has received great attention. However, studies have shown the benchmark Pt based catalysts are insufficient in selectively catalysing the glycerol to lactic acid transformation, resulting in a low yield of lactic acid. Here we report a study on glycerol electrolysis with anion-exchange membrane electrode assembly electrolyser. The reaction conditions including mass transport, temperature, current density and KOH concentration were optimised, among which temperature played a significant role in facilitating the reaction rate and thermodynamics. With the optimised condition a multicomponent Pt/C-zeolite electrocatalyst system (Pt/C-CBV600) was developed and tested, which is capable to increase the lactic acid selectivity to 57.3% from the 33.8% with standalone Pt/C. Although the detailed mechanism required further investigation, it is hypothesised that the CBV600 zeolite with abundant Lewis acid surface sites can effectively bind the dihydroxyacetone intermediate, and drive the reaction towards pyruvaldehyde heterogeneously, the key step to form lactic acid.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Highly selective cathodic H2O2 electrosynthesis by a metal tellurate/carbon black composite material

  • Alemany Molina, Gabriel
  • Fernández-Catalá, Javier
  • Cao, Wei
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
One sustainable alternative to the traditional anthraquinone technology to produce H2O2 is direct H2O2 electrosynthesis by oxygen reduction reaction (ORR). However, selecting electrocatalysts is a great challenge since most of the materials present selectivity towards the formation of H2O (4-electron pathway). In this work, we present a facile electrocatalyst preparation consisting of Ni3TeO6 (NTO), a metal tellurate, mixed with carbon black (Vulcan) with outstanding selectivity (2.2 transferred electrons) towards the production of H2O2 by ORR. To test the possible real application, the NTO/Vulcan catalyst was tested in a long-term stability test showing excellent faradaic efficiency and 93.5 % of the initial current. TEM and XPS measurements after reaction show that NTO/Vulcan materials are robust and durable electrocatalysts. This work opens the door of novel materials such as metal tellurates based on Ni for their application as ORR electrocatalysts in industrial applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

The unveiling of a Levulinic Acid Isomer in High Performance Liquid Chromatography analysis, a key point for the reliable determination of the catalytic conversion of Levulinic Acid to γ-Valerolactone

  • Ruiz-Bernal, Zaira
  • Tane, Elena Georgiana
  • Burgos, Nuria
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Tane, Elena Georgiana|||/items/45998146-5019-4a50-a12f-43cf5211e86c
This work was motivated by the difficulties found in the analysis and quantification of levulinic acid (LA) and the reaction products resulting from the catalyzed transformation of LA into γ-valerolactone (GVL) using High Performance Liquid Chromatography (HPLC). The starting study carried out with the Zorbax Eclipse XDB-C8 column and UV/Vis detector (or Diode Array Detector, DAD) was puzzling, mainly because two different signals appeared in the analysis of aqueous LA standards. The use of C8-UV/Vis-MS and the measurements with DAD in range wavelength mode (RWL) allowed to suggest the presence of pseudo-LA (sometimes regarded as unidentified impurities in the reactant) together with LA. The finding of an additional LA species was fundamental for the accurate quantification of LA, necessary to provide reliable results in the analysis of the catalytic LA transformation products. The study carried out also allowed the identification of 4-hydroxypentanoic acid (HPA), a labile intermediate compound. The analysis of the target solution (resulting from the explained catalytic system) was also performed with a REZEX ROA-Organic Acid H+ column and Refractive Index Detector (RID) in order to determine its applicability and to check if the results obtained with the two configurations were coherent. The REZEX-RID configuration led to a simpler analysis, as it did not involve the separation of the LA species and allowed the detection of 1,4-pentanediol (not possible by UV/Vis analysis). The results obtained with REZEX-RID helped to support the need of considering the presence and quantification of an LA isomer in the standard solutions for the right quantification of LA using the C8-UV/vis (or DAD) configuration. The present study clarifies relevant practical aspects of the HPLC-UV/Vis (or DAD) analysis of LA present in aqueous solutions.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article “Nanostructured TiO2 synthesized by different methods: Relationship between TiO2 porosity and crystalline-amorphous structure”

  • El Koulali, Fatima
  • Ouzzine, Mohammed
  • Cano-Casanova, Laura
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
The folder includes the characterization data of the materials that made it possible to write the article, a summary of whose content is provided next: The manuscript examines key aspects of TiO₂, focusing on its synthesis methods and how these influence its properties. It provides a thorough review of techniques for producing nanostructured TiO₂ and applies them, together with post-synthesis heat treatments, to prepare nearly thirty materials. These samples are characterized in terms of their porous texture and their crystalline (anatase, brookite, rutile) and amorphous phases. Results show that many materials exhibit a high mesoporosity (60–70%) and that the proportions of crystalline and amorphous phases strongly depend on the synthesis conditions. Phase fractions are determined by X-ray diffraction using a simplified method previously reported in the literature, also evaluating its limitations. The analysis identifies a linear relationship between surface area and amorphous phase content in TiO₂, a correlation that had been suggested before but never clearly demonstrated. Overall, the study provides a useful guide for researchers to select appropriate synthesis methods and to easily estimate the amorphous fraction of TiO₂ based on the material’s surface area.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Imino esters as useful precursors for the synthesis of glutamate derivatives and functionalization of carbon materials

  • Rodríguez-Flórez, Lesly V.
  • Rodríguez-Flórez, Lesly V.|||/items/7c1155f2-fa18-402a-b7df-a1cef44bbfc4
The present doctoral thesis focused mainly on the use of α-imino esters in 1,4-conjugated addition reactions (Michael-type additions) which have been optimized using phosphines acting as organocatalysts. On the other hand, α-imino esters have been evaluated in heterogeneous systems functionalizing carbonaceous matrices through 1,3-dipolar cycloaddition reactions and their subsequent application in catalysis. Chapter 1 describes a new approach for the preparation of glutamates and pyroglutamates surrogates without the use of bases, through Michael-type addition reactions between different imino esters and conjugated alkenes in the presence of a phosphine that acts as an organocatalyst. Chapter 2 reports the results obtained from the functionalization of single-walled nanotubes (SWCNT) with different imino esters through the microwave-assisted 1,3-dipolar cycloaddition reaction; the pyrrolidine rings-functionalized material was characterized by using several techniques and subsequently the synthesis of a heterogeneous catalyst using an iridium complex was afforded. This supported catalyst was evaluated, as a proof of concept, in the hydrogen-transfer reaction of acetophenone to yield 1-phenyletanol. In Chapter 3 the covalent functionalization of multilayer graphene (MLG) via microwave-assisted 1,3-dipolar cycloaddition with azomethine ylides generated by thermal 1,2-prototropy from various imino esters is described. In particular, this strategy allows to anchor an imino ester containing a 2,2’-bipyridine unit in order to obtain a functionalized material capable of assembling a ruthenium atom to achieve a heterogeneous supported complex. This new catalyst was tested, as a proof of concept, in the photocatalytic aerobic oxidative hydroxylation reaction of 4-methoxyphenylboronic acid.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Selective biomass conversion over novel designed tandem catalyst

  • Azar, Fatima Zahra
  • El Kasmi, Achraf
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Liu, Haichao
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
Selective conversion of biomass into targeted molecules like polyols, especially, from cellulosic compounds, is being widely investigated as a sustainable process to produce biodiesel and bio-additives. The known process involves two steps, namely hydrolysis and hydrogenation. Thus, it requires two different catalytic materials or bifunctional catalysts. In this context, the present work reports a new catalytic approach based on the use of tandem catalysts, consisting of the combination of an acid solid catalyst (active for hydrolysis) and a supported metal catalyst (active for hydrogenation). Two different functionalized activated carbons and the resin Amberlyst 15 have been tested as solid acid catalysts, and Ru nanoparticles supported on the original activated carbon (SA) are the metal catalyst part of the tandem. All the tested tandem catalysts exhibited higher activity than the supported Ru catalyst did. The highest cellulose conversion and selectivity to sorbitol (70 % and 86 %, respectively) have been obtained over a novel tandem catalyst, which resulted from a physical mixture between a sulfuric acid modified SA carbon (SASu) and Ru loaded SA (Ru/SA), leading to a tandem catalyst (Ru/SA+SASu). This novel-designed tandem catalyst is reusable. Based on tandem catalysts with a solid-solid system combination, the adopted novel-designed catalytic approach is cost-efficient and sustainable, and can be considered promising for the green production of high-added-value chemicals.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Deepening the Understanding of Carbon Active Sites for ORR Using Electrochemical and Spectrochemical Techniques

  • Flores-Lasluisa, Jhony Xavier
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
Defect-containing carbon nanotube materials were prepared by subjecting two commercial multiwalled carbon nanotubes (MWCNTs) of different purities to purification (HCl) and oxidative conditions (HNO3) and further heat treatment to remove surface oxygen groups. The as-prepared carbon materials were physicochemically characterized to observe changes in their properties after the different treatments. TEM microscopy shows morphological modifications in the MWCNTs after the treatments such as broken walls and carbon defects including topological defects. This leads to both higher surface areas and active sites. The carbon defects were analysed by Raman spectroscopy, but the active surface area (ASA) and the electrochemical active surface area (EASA) values showed that not all the defects are equally active for oxygen reduction reactions (ORRs). This suggests the importance of calculating either ASA or EASA in carbon materials with different structures to determine the activity of these defects. The as-prepared defect-containing multiwalled carbon nanotubes exhibit good catalytic performance due to the formation of carbon defects active for ORR such as edge sites and topological defects. Moreover, they exhibit good stability and methanol tolerances. The as-prepared MWCNTs sample with the highest purity is a promising defective carbon material for ORR because its activity is only related to high concentrations of active carbon defects including edge sites and topological defects.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Utilization of Deposited Coke on Zeolites During the Catalytic Cracking of Nitrogen-Containing Polymer for the Oxygen Reduction Reaction

  • Kokuryo, Shinya
  • Shu, Yasuhiro
  • Taniguchi, Yurika
  • Takada, Ryuji
  • Miyake, Koji
  • Uchida, Yoshiaki
  • Alemany Molina, Gabriel
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Nishiyama, Norikazu
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
This work focuses on the development of a new method to utilize deposited coke on zeolite catalysts, formed during the plastic waste cracking. Nitrogen-doped carbon catalysts are prepared using nylon-66 and Zn2+ ion-exchanged ZSM-5 zeolites. After the cracking reaction, nitrogen-doped carbon materials are obtained by removing zeolites from zeolite/coke composites using base and acid treatment. The synthesized N-doped carbon using Zn2+ type ZSM-5 zeolites exhibits higher catalytic performance on the oxygen reduction reaction (ORR) with an onset potential of 0.95 V (vs RHE) and a half-wave potential of 0.80 V (vs RHE) than that using H+ type ZSM-5 zeolites. The characterization revealed that the evaporation of Zn2+ in zeolites significantly enhanced the porosity of N-doped carbon. Moreover, the aromatization and poly-cyclization reactions promoted the generation of highly active edge Valley-N sites, leading to their outstanding activity on ORR. This work provides new directions for the utilization of deposited coke on zeolites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of the carbon surface chemistry on the metal speciation in Ru/C catalysts. Impact on the transformation of levulinic acid to γ-valerolactone

  • Ruiz-Bernal, Zaira
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
A set of Ru/C catalysts prepared using a commercial active carbon and a series of carbon materials derived from it (treatment in N2 flow, at 300, 600 or 900 °C that selectively removes surface oxygen complexes), of similar textural properties and different surface chemistry, were used, without reduction treatment, in the aqueous phase transformation of levulinic acid (LA) to γ-valerolactone (GVL) at 70 °C. The prepared Ru/C catalysts were active, being activity and selectivity strongly dependent on the support surface chemistry. It was confirmed that the supported Ru species became reduced under reaction conditions, and this process was more efficient in catalysts prepared with the heat treated supports, due to the different interactions created between Ru species and the support surface. In a cleaner carbon surface, the anchorage of the Ru species on carbon oxygen groups was limited, and they were more prone to be reduced and to move, forming more defined metallic structures. The carbon surface chemistry determined the Ru speciation (reduced and oxidized species), and the proportion of reduced Ru drived the H spill over process, which was related to the creation of protonic acid sites, proposed to be key point to explain the trend in selectivity to GVL.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Enhanced electrocatalytic performance of SrMn1-xCoxO3 perovskite metal oxides for oxygen reactions in Zn-air batteries: Influence of Mn/Co ratio

  • Riquelme-García, Paula
  • García-Rodríguez, Mario
  • Flores-Lasluisa, Jhony Xavier
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Riquelme-García, Paula|||/items/eaa40ff9-6931-43ac-9865-2c13ac4a77c9
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
Metal oxides of perovskite structure and SrMn1-xCoO3 type have been prepared by a sol-gel synthesis method and mixed with carbon black by ball milling for their use as electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in a Zn-air battery. The composites obtained were characterized by different physicochemical and electrochemical techniques. The results of the characterization revealed the existence of two perovskite phases corresponding to Mn and Co as function of the Mn/Co ratio, whose interaction is related to a positive effect for the electrocatalytic activity. The presence of the M-O-C contribution was detected by XPS, which is related to an improvement in the catalytic activity against ORR/OER due to a better interaction and electron transfer between the perovskite and the carbon material. In addition, important differences were observed in the surface chemical species as a function of Mn/Co ratio and the higher the Co content in the composites the higher the amount of oxygen vacancies. The presence of oxygen vacancies is directly related to an improved OER activity; however, the presence of higher Mn content led to better catalytic results for ORR. The best electrocatalyst was studied in a Zn-air battery obtaining an excellent activity with a cyclability higher than 20 h, which is explained by the appropriate amounts of both Mn and Co.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Silica extracts from fly ash modified via sol-gel methods and functionalized with CMPO for potential scavenging of rare earth elements La3⁺ and Ce3⁺

  • Gómez, Mauricio
  • Pizarro, Jaime
  • Díaz, Carlos
  • Ortiz, Claudia
  • Castillo, Ximena
  • Navlani-García, Miriam
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
A mesoporous material was synthesized using silica extracts from fly ash and its properties were studied. Subsequently, it was functionalized with carbamoylmethylphosphine oxide (CMPO) to capture La3+ and Ce3+. The developed mesoporous material was obtained by the sol-gel method and was called Si-MMS (siliceous mesoporous materials), subsequently functionalized with APTMS (1-(2-aminoethyl)-3-aminopropyl trimethoxysilane) in a reflux system, which led to the synthesis of Si-MMS-APTMS. This derivative was modified with carbonyldiimidazole (CDI) and diethylphosphonoacetic acid, which finally resulted in the synthesis of Si-MMS-CMPO as the final product. The materials were characterized by DRIFT, XRD, SEM-EDS, TEM, XPS, elemental analysis and nitrogen isotherms at −196 °C, confirming that the synthesis and subsequent modification of the mesoporous structure was successful. Adsorption studies in batch systems indicated that the optimal pH for La3+ was 6, the Langmuir isotherm model and the non-linear Sips models were perfectly fitted and the best fitting kinetics is the Elovich model. For Ce3+ the optimal pH was 7.5, the non-linear Sips isotherm fit the best and the non-linear Pseudo-second order kinetics was the mechanism that best represents the adsorption. The maximum experimental adsorption capacity qe of La3+ was 17.00 mg g−1 and for Ce3+ was 30.09 mg g−1. In both cases, the rapid adsorption suggests an open porous matrix that facilitates the formation of chelates between the adsorbates and the phosphoryl group -PO32-.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Highly selective cathodic H2O2 electrosynthesis by a metal tellurate/carbon black composite material"

  • Alemany Molina, Gabriel
  • Fernández-Catalá, Javier
  • Cao, Wei
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Pt nanoparticles for improving the performance and durability of Fe-N-C based materials towards oxygen reduction reaction in alkaline direct methanol fuel cells"

  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
  • Lo Vecchio, Carmelo
  • Baglio, Vincenzo
  • Aricò, Antonino Salvatore
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Exploring Pt-Impregnated CdS/TiO2 Heterostructures for CO2 Photoreduction"

  • García-Santos, Lidia
  • Fernández-Catalá, Javier
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • García-Santos, Lidia|||/items/f1c64d7a-c224-4df9-8b4a-1b83259628c2
  • Fernández-Catalá, Javier|||/items/8ee681a9-afe7-4345-be73-4399b5083d34
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Electrocatalizadores basados en materiales carbonosos y metales de transición para su aplicación en la producción y uso del hidrógeno

  • Alemany Molina, Gabriel
  • Alemany Molina, Gabriel|||/items/1909a9b3-7d2a-4497-97a3-f301d574987e
Esta Tesis Doctoral se ha enfocado en el desarrollo y caracterización de materiales carbonosos para su uso como electrocatalizadores en aplicaciones energéticas. Los catalizadores preparados presentaron diferentes propiedades texturales y diferentes heteroátomos de nitrógeno como nano-dominios de C3N4 o como grupos funcionales nitrogenados en la superficie del material carbonoso. Se estudiaron múltiples fases metálicas tales como Cu o Fe altamente dispersos, pero también aleaciones de nanopartículas de Pd o Pt con otros metales. Las reacciones estudiadas fueron la HER, OER y, especialmente, la ORR. Algunos de los estudios experimentales fueron complementados con modelado computacional para una mejor comprensión de las reacciones y de las interacciones nanopartícula-soporte. Concretamente, algunos de los aspectos de más relevancia han sido la durabilidad de los catalizadores y la tolerancia al metanol. Además, los materiales basados en Pt y Pd fueron estudiados como catalizadores para la HER y los basados en Pd como catalizadores bifuncionales ORR/OER para su aplicación en baterías Zn-aire. Finalmente, se dedica un último capítulo al estudio de la síntesis electroquímica de peróxido de hidrógeno mediante ORR.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Enhanced electrocatalytic performance of SrMn1-xCoxO3 perovskite metal oxides for oxygen reactions in Zn-air batteries: Influence of Mn/Co ratio"

  • Riquelme-García, Paula
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Flores-Lasluisa, Jhony Xavier
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Riquelme-García, Paula|||/items/eaa40ff9-6931-43ac-9865-2c13ac4a77c9
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
This file contains data of the figures of the experiments performed and of the microscopy images.
RUA. Repositorio Institucional de la Universidad de Alicante
Research data Set de datos (Dataset)

Data for the regular article "Few layers graphene-based electrocatalysts for ORR synthesized by electrochemical exfoliation methods"

  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
This file contains data of the figures of the experiments performed and of the microscopy images.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A review of lipase immobilization on hydrophobic supports incorporating systematic mapping principles

  • Guimarães, José R.
  • Oliveira, K.S.G.C.
  • Gonçalves, M.C.P.
  • Romanelli, J.P.
  • Lopes, L.A.
  • Berenguer-Murcia, I.
  • Fernández-Lafuente, Roberto
  • Tardioli, P.W.
A review of the literature covering research on the immobilization of lipases on hydrophobic supports was performed using systematic mapping (SM) concepts. This approach consists of a rigorous review of the methodology used to catalog evidence, to identify gaps at the frontier of knowledge, to identify unknown trends, and to list research groups. Our results show a wide variety of available lipases, including commercial, wild-type and recombinant strains. However, the most commonly used lipases are lipases from Thermomyces lanuginosus (TLL), Candida rugosa (CRL) or Rhizomucor miehei (RML) and lipase B from Candida antarctica (CALB). A wide variety of supports with different degrees of hydrophobicity were identified and the supports activated with a layer of octyl or octadecyl groups were the most commonly used. The advantages of lipase immobilization on these supports are discussed. Among them, the immobilization, purification, stabilization and hyperactivation of lipases in a single step stand out. Moreover, problems related to lipase immobilization by interfacial activation are highlighted (mainly enzyme release). Strategies to overcome these problems include immobilization on heterofunctional supports or intermolecular crosslinking of enzymes immobilized by physical and/or chemical agents. The possibility of increasing the capacity of supports by lipase multilayer immobilization is also discussed. Finally, the structure, distribution of the network and the frequency of co-occurrence between lipases and supports are elucidated to determine the possible hotspots and hitherto unexplored advances in knowledge. © 2023 The Royal Society of Chemistry, This work was funded by São Paulo Research Foundation (FAPESP, grant number 2016/10636-8), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior – Brasil (CAPES, Finance Code 001), Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq, project numbers 405889/2016-0 and 308212/2017-7), Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (project PID2022-136535OB-I00 and MCIN/AEI/10.13039/501100011033/) and by FEDER A Way of Making Europe funds (project PID2021-123079OB-I00), and Generalitat Valenciana (CIPROM/2021/70)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nitrogen sites prevail over textural properties in N-doped carbons for the oxygen reduction reaction

  • Quílez Bermejo, J.
  • Pérez Rodríguez, Sara
  • Torres Gamarra, Daniel
  • Canevesi, Rafael L. S.
  • Morallón, Emilia
  • Cazorla Amorós, Diego
  • Celzard, Alain
  • Fierro, Vanessa
5 figures., Nitrogen-doped carbon-based electrodes are among the most promising alternatives to platinum-based electrodes in the cathode of fuel cells and metal-air batteries, where the oxygen reduction reaction (ORR) takes place. Among the approaches for improving ORR activity, nitrogen functionalities and well-developed textural properties have proved very effective. Nonetheless, the question of which between nitrogen active sites or textural properties are more crucial in N-doped carbon materials remains unanswered. This work proposes a comparative and critical approach through the selective functionalization of four commercial activated carbons with different textural properties. This study highlights the greater importance of N-doping in relation to the textural properties of carbon materials, and provides fundamental insights for conclusively addressing the ongoing debate within the carbon community about the significance of these two factors in the context of ORR., The ANR-15-IDEX-04-LUE project and the TALiSMAN and TALiSMAN2 projects funded by the European Regional Development Fund (ERDF) are gratefully acknowledged. The authors would also like to thank project PID2021-123079OB-I00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”. Finally, JQB thanks the Ministerio de Universidades, the European Union, and the University of Alicante for their financial support (MARSALAS21-21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Proteases immobilized on nanomaterials for biocatalytic, environmental and biomedical applications: Advantages and drawbacks

  • Bilal, Muhammad
  • Qamar, Sarmad Ahmad
  • Carballares, Diego
  • Berenguer-Murcia, Ángel
  • Fernández-Lafuente, Roberto
Proteases have gained significant scientific and industrial interest due to their unique biocatalytic characteristics and broad-spectrum applications in different industries. The development of robust nanobiocatalytic systems by attaching proteases onto various nanostructured materials as fascinating and novel nanocarriers has demonstrated exceptional biocatalytic performance, substantial stability, and ease of recyclability over multiple reaction cycles under different chemical and physical conditions. Proteases immobilized on nanocarriers may be much more resistant to denaturation caused by extreme temperatures or pH values, detergents, organic solvents, and other protein denaturants than free enzymes. Immobilized proteases may present a lower inhibition. The use of non-porous materials in the immobilization prevents diffusion and steric hindrances during the binding of the substrate to the active sites of enzymes compared to immobilization onto porous materials; when using very large or solid substrates, orientation of the enzyme must always be adequate. The advantages and problems of the immobilization of proteases on nanoparticles are discussed in this review. The continuous and batch reactor operations of nanocarrier-immobilized proteases have been successfully investigated for a variety of applications in the leather, detergent, biomedical, food, and pharmaceutical industries. Information about immobilized proteases on various nanocarriers and nanomaterials has been systematically compiled here. Furthermore, different industrial applications of immobilized proteases have also been highlighted in this review., The NOBELIUM JOINING GDANSK TECH RESEARCH COMMUNITY program is graciously acknowledged for supporting this work under the international collaboration project awarded to Muhammad Bilal (Grant number 44/2023/IDUB/I.1). We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00). A.B.M. thanks the Generalitat Valenciana (CIPROM/2021/70) for financial support and PID2021-123079OB-I00 project funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Immobilized Lipases in the Synthesis of Short-Chain Esters: An Overview of Constraints and Perspectives

  • Sousa, Ronaldo Rodrigues de
  • Santos, Michelle M. dos
  • Medeiros, Matheus W. R.
  • Manoel, Evelin A.
  • Berenguer Murcia, A.
  • Freire, Denise Maria Guimarães
  • Fernández-Lafuente, Roberto
  • Ferreira-Leitão, Viridiana Santana
Biocatalysis—specifically the use of immobilized lipases—has been proposed as a greener alternative for ester production. Several critical challenges, such as the high cost of biocatalysts, are delaying the industrial implementation of biocatalysis. Moreover, for short-chain ester synthesis, the strong inhibition/inactivation potential of short-chain acids and alcohols on lipases leads to long reaction cycles and/or the need to use organic solvents to overcome the limitations of solvent-free systems and, consequently, the decrease in product concentrations. This review presents an overview of the scientific developments in enzymatic short-chain ester synthesis, compiling the constraints on their syntheses from a process perspective, including insights about key performance indicators (KPI) and economic parameters., We gratefully recognize the financial support from Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do Rio de Janeiro—FAPERJ (APQ1 E26/211.736/2021 and IT Grant E-26/260.418/2022), Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00). A.B.M. thanks the Generalitat Valenciana (CIPROM/2021/70) for financial support and PID2021-123079OB-I00 project funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A comprehensive review of lipase-catalyzed acidolysis as a method for producing structured glycerides

  • Tacias-Pascacio, Veymar G.
  • Abellanas-Pérez, Pedro
  • Andrades, Diandra de
  • Tavano, Olga Luisa
  • Mendes, Adriano A.
  • Berenguer Murcia, A.
  • Fernández-Lafuente, Roberto
The production of structured lipids is a current trend in food technology in order to enhance the properties of fats and oils. Lipases have been utilized in many instances for this purpose, in most examples in an immobilized form. In this review, after discussing the different strategies to produce artificial lipids using lipases (esterification, transesterification, interesterification), we have focused on acidolysis. The reaction commences with hydrolysis at one position of the triglyceride molecule and is followed by the esterification between the released hydroxyl group and the target fatty acid (although other carboxylic acids can be used, such as phenolic acid derivatives). This means that water plays a double role, as substrate in the first step and as an undesired by-product in the second one. Therefore, the control of water activity becomes critical in these reactions. This review discusses the advantages, possibilities and drawbacks of this strategy to produce tailor-made designed lipids, summarizing many of the papers related to this strategy. The summarized results show the complexity of this reaction that can make the understanding and reproducibility of the reactions complex if there are no strict controls of all parameters determining the final yields., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00), CNPq (Grants 307809/2020-0, 306253/2023-2, 405418/2021-3) and FAPERGS (grants 21/2551-0002270-1, 22/2551-0000397-4). A.B.M. thanks the Generalitat Valenciana (CIPROM/2021/70) for financial support. We thank Novozymes, and specially R. Martinez, by the kind donation of enzymes. This communication is part of the R + D + i project PID2021-123079OB-I00 funded by MCIN/ AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Zeolite@Metal-organic framework core-shell synthesized from the aluminum of the zeolite with accessible internal surface for CO2 adsorption

  • Güemes, Lucas
  • Navarro, Marta
  • Cacho-Bailo, Fernando
  • Jaimes-Paez, Cristian D.
  • Cazorla-Amorós, Diego
  • Téllez, Carlos
  • Coronas, Joaquín
Data will be made available on request., Combining the rigid microporosity of zeolites with the more versatile structures of metal–organic frameworks (MOFs) seeks to obtain a synergistic effect of both materials. Starting from a low cost and industrially produced zeolite, as it is zeolite NaA (with the LTA type structure), we show that it is possible to crystallize a MOF as shell onto it by only using an aqueous solution of terephthalic acid (H2BDC). Unlike other zeolite-MOF hybrids reported in the literature, the crystallized MOF only uses the aluminum from the zeolite and may share in turn some aluminum atoms with the inorganic zeolite core, therefore it consists solely of zeolitic Al and BDC. Depending on the pretreatment of the zeolite and the synthesis conditions (pH, time, linker ratio), the crystalline zeolite core is maintained or converted into an amorphous aluminosilicate. Thus, it is possible to retain a part of the adsorption properties of the parent zeolite without degrading its structure. The resulting core–shell material, designated as LTA@Al-BDC, combines the zeolite microporosity and molecular sieving properties with the MOF that crystallizes as high aspect ratio sheets which, together with its hydrophobicity, favors the contact with polymeric materials. In addition, being zeolite 4A (NaA) affinity towards CO2 been probed, the resulting LTA@Al-BDC material constitutes a prominent candidate towards CO2 separation., This work gratefully acknowledges grants PID2022-138582OB-I00 and PID2021-123079OB-I00 funded by MICIU/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”. L. Güemes also thanks the Aragón Government (DGA) for his Ph.D. grant. Financial assistance from the Government of Aragón (T68_23R) is also acknowledged. CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033/., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Zeolite@Metal-organic framework core-shell synthesized from the aluminum of the zeolite with accessible internal surface for CO2 adsorption

  • Güemes, Lucas
  • Navarro, Marta
  • Cacho-Bailo, Fernando
  • Jaimes-Paez, Cristian D.
  • Cazorla-Amorós, Diego
  • Téllez, Carlos
  • Coronas, Joaquín
Combining the rigid microporosity of zeolites with the more versatile structures of metal–organic frameworks (MOFs) seeks to obtain a synergistic effect of both materials. Starting from a low cost and industrially produced zeolite, as it is zeolite NaA (with the LTA type structure), we show that it is possible to crystallize a MOF as shell onto it by only using an aqueous solution of terephthalic acid (H2BDC). Unlike other zeolite-MOF hybrids reported in the literature, the crystallized MOF only uses the aluminum from the zeolite and may share in turn some aluminum atoms with the inorganic zeolite core, therefore it consists solely of zeolitic Al and BDC. Depending on the pretreatment of the zeolite and the synthesis conditions (pH, time, linker ratio), the crystalline zeolite core is maintained or converted into an amorphous aluminosilicate. Thus, it is possible to retain a part of the adsorption properties of the parent zeolite without degrading its structure. The resulting core–shell material, designated as LTA@Al-BDC, combines the zeolite microporosity and molecular sieving properties with the MOF that crystallizes as high aspect ratio sheets which, together with its hydrophobicity, favors the contact with polymeric materials. In addition, being zeolite 4A (NaA) affinity towards CO2 been probed, the resulting LTA@Al-BDC material constitutes a prominent candidate towards CO2 separation.