Skip to main content

ESTRUCTURAS DE HORMIGON DE ALTAS PRESTACIONES UTILIZANDO MATERIALES Y TECNOLOGIAS AVANZADOS DE DISEÑO Y CONSTRUCCION

RTI2018-097314-B-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Efficiency of shear strengthening of RC beams with externally bonded FRP materials: state-of-the-art in the experimental tests

  • Kotynia, Renata
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Kaszubska, Monika
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
This paper presents a study of the shear capacity of reinforced concrete (RC) beams strengthened in shear with externally bonded (EB) fiber reinforced polymer (FRP) composites, based on the performance of existing published tests. The main objective of this study is to create a comprehensive overview of the performance of different shear strengthening configurations and the failure modes observed in experimental tests. In addition, the influence of the following parameters on the strengthening efficiency has been analyzed: shear span to depth ratio (a/d), existing steel transverse reinforcement ratio (ρsw), concrete strength (fck), size effect (d), longitudinal reinforcement ratio (ρsL), strengthening configurations, type of FRP: sheets or laminates (CFRP, GFRP), and FRP axial stiffness (AfEf)., This paper has been developed under the framework of the Research Projects “BIA2015‐64672‐C4‐1‐R” and “RTI2018‐097314‐BC21” funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and co‐funded by the European Regional Development Funds (ERDF). The authors would also like to thank the Cost Action TU1207 which funded a short term scientific mission of the second author in Lodz University of Technology., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Mechanical model for the shear strength prediction of corrosion-damaged reinforced concrete slender and non slender beams

  • Cladera Bohigas, Antoni
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Ribas González, Carlos Rodrigo
Steel corrosion in RC structures leads to a reduced reinforcement area, changes in steel mechanical properties, cracking and, eventually, concrete cover spalling, among other phenomena. Stirrups are generally small in diameter and, given their small concrete cover, they are more susceptible to corrosion than longitudinal reinforcement. Hence their corrosion significantly affects shear strength. Most existing models that deal with reduction in the shear strength of corrosion-damaged reinforced concrete (RC) structures are empirical; that is, they have been numerically fitted to test results. In this context, conceptual models based on structural mechanics principles and verified for corrosion-damaged members are still needed. In this paper, the Compression Chord Capacity Model (CCCM), a shear mechanical model previously derived by the authors, is adapted to predict the shear strength of corrosion-damaged RC beams. For this purpose, the model parameters that can be affected by steel corrosion in RC beams were identified and modified accordingly. CCCM predictions were compared to the experimental results of 146 slender and non slender beams failing in shear, in which stirrups and/or longitudinal reinforcement was subjected to corrosion. The CCCM achieved very satisfactory shear strength predictions when reductions in reinforcement areas and web width were taken into account, with a mean value of the Vtest/Vpred ratio equaling 1.19 and a 19.5% coefficient of variation. Finally, a parametric analysis was performed to show the predicted reductions in shear strength according to the CCCM compared to the experimental results of some especially relevant tests., The authors wish to acknowledge the financial support provided by the Spanish Ministry of Science, Innovation and Universities and European Funds for Regional Development (EU ERDF) through Research projects: RTI2018-099091-B-C22 (AEI/FEDER, UE) and RTI2018-097314-B-C21 (AEI/FEDER, UE)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Assessment of the existing models to evaluate the shear strength contribution of externally bonded FRP shear reinforcements

  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Kotynia, Renata
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
This paper presents an analysis of the performance of different existing formulations to quantify the FRP contribution to the shear strength of RC elements strengthened in shear by externally bonded FRP sheets. A large database of 555 tests has been assembled distinguishing between the shape of the section, the existence of internal transverse reinforcement and the FRP configurations. In general, predictions are more conservative for beams without transverse reinforcement. In addition, in some cases predictions are unsafe for beams with transverse reinforcement, showing a possible interaction with the internal transverse reinforcement which is not considered in the experimental FRP contribution to the shear strength. For wrapped FRP configurations, models generally assumed failure at the bottom corner of the section and results are very conservative in some cases where failure was experimentally observed along the web. For U-shaped and side-bonded configuration, results depend mainly on the assumed bond model and are more accurate than in the previous case, showing for some models unsafe predictions for the continuous FRP system applied in beams with transverse reinforcement., This paper has been developed under the framework of the Research Projects “BIA2015-64672-575 C4-1-R” and “RTI2018-097314-B-C21” funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and co-funded by the European Regional Development Funds (ERDF). The authors would also like to thank the Cost Action TU1207 which funded a short term scientific mission of the first author in Lodz University of Technology., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Theoretical model for the shear strength of prestressed concrete beams with FRP tendons

  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Murcia Delso, Juan|||0000-0001-6424-7262
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Legasa Melet, Tecla
This material may be downloaded for personal use only. Any other use requires prior permission of the American Society of Civil Engineers. This material may be found at https://ascelibrary.org/doi/abs/10.1061/JCCOF2.CCENG-4390., Prestressing tendons made of fiber-reinforced polymers (FRPs) are a promising alternative to conventional steel tendons in prestressed concrete structures owing to their corrosion resistance. However, the shear strength of FRP prestressed concrete beams is still not well understood. This paper presents a theoretical model for predicting the shear strength of prestressed concrete beams with FRP tendons or strands, with and without FRP shear reinforcement. The model is an extension of the compression chord capacity model (CCCM), originally proposed for steel-reinforced concrete structures, which has been adapted to account for the particularities of FRP as active and passive reinforcement. The model is applicable to rectangular, T, and I sections and accounts for reductions in shear strength caused by bond loss in FRP tendons. Experimental validation of the model was performed by comparing the theoretical predictions for 55 shear tests found in the literature. Good accuracy was obtained in predicting the ultimate shear capacity of beams and identifying shear bond failures observed in some tests., The study presented in this paper was developed in the scope of research projects RTI2018-097314-B-C21 and PID2021-123701OB-C21 funded by the Spanish Ministry of Science and Innovation and the European Regional Development Funds (ERDF)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A variable order framework for 3D nonlinear analysis of reinforced concrete frames under general loading

  • Poliotti, Mauro
  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
  • Moller, O.
A framework for the analysis of three-dimensional reinforced concrete frame structures, capable of reproducing general failure modes, is presented. A force-based model which guarantees the equilibrium between nodal and sectional forces is enhanced by means of a cross-sectional model. It is capable of capturing the complex coupling between all the internal forces. Consequently, different failure modes can be reproduced such as shear, torsional, flexural or axial failures. Material modeling of concrete is made using a plastic-damage model that incorporates a variable dilatancy parameter. The sectional and constitutive models are implemented in OpenSees. The sectional model can be used at each integration point of the force-based element. Alternatively, it can be used only where high coupling between the internal forces is expected, producing a variable order structural model. The validation shows that the frame element is capable of accurately reproduce beams and columns under monotonic and cyclic loads. The framework presented is a powerful numerical instrument for the analysis, design and assessment of reinforced concrete buildings and bridges., The first and second authors acknowledge the support provided by Spanish Ministry of Economy, Industry and Competitiveness and the European Regional Development Fund (ERDF), through the projects BIA2015-64672-C4-1R, BIA2012-36848 and RTI2018-097314-B-C21. The first author acknowledges the support of the Catalan Agency for University and Research through doctoral scholarship 2018FI-B1-00103. The third author acknowledges the support of the Research Council of Universidad Nacional de Rosario (CIUNR) and the Science and Technology Secretariat (SECyT), through the project 1ING601., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.a - Facilitar el desenvolupament d’infraestructures sostenibles i resilients als països en desenvolupament per mitjà de més suport financer, tecnològic i tècnic als països africans, països menys avançats, països en desenvolu­pament sense litoral i petits estats insulars en desenvolupament, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.b - Per a 2020, augmentar substancialment el nombre de ciutats i assentaments humans que adopten i posen en marxa polítiques i plans integrats per promoure la inclusió, l’ús eficient dels recursos, la mitigació del canvi climàtic i l’adaptació a aquest, així com la resiliència davant dels desastres, i desenvolupar i posar en pràctica una gestió integral dels riscos de desastre a tots els nivells, d’acord amb el Marc de Sendai per a la reducció del risc de desastres 2015.2030, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.5 - Per a 2030, reduir de forma significativa el nombre de morts causades per desastres, inclosos els relacio­nats amb l’aigua, i de persones afectades per aquests, i reduir substancialment les pèrdues econòmiques directes causades per desastres relacionades amb el producte interior brut mundial, fent un èmfasi especial en la protecció de les persones pobres i de les persones en situacions de vulnerabilitat
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Mechanical model for the shear strength of steel fiber reinforced concrete (SFRC) beams without stirrups

  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Spinella, Nino
  • Recupero, Antonino
  • Cladera Bohigas, Antoni
The final publication is available at Springer via http://dx.doi.org/10.1617/s11527-020-01461-4., Numerous studies have shown that adding steel fibers to the concrete mixture improves both the shear strength and ductility of reinforced concrete beams. Most current shear design formulations for steel fiber reinforced concrete beams are empirically based and their predictions provide acceptable results when compared with tests results, but only in limited ranges of the parameters involved. On the other hand, many shear theoretical models suggested in the literature are derived by extending previous formulations for conventional reinforced concrete beams, just introducing the stresses transferred across the critical shear crack. Since the effects of steel fibers on the others shear resisting mechanisms are not accounted for, “adjusting” empirical factors must be used to fit the experimental results. There is, therefore, the need for developing mechanical models capable to rationally account for the effects of steel fibers on the global shear strength and on each shear resisting mechanisms. In this paper, the previously derived and validated Multi Action Shear Model for RC elements is extended to steel fiber reinforced concrete beams without stirrups. The effects of steel fibers on each resisting mechanism have been identified and incorporated in the formulation of each shear component and in the Multi-Action Shear Model equilibrium equations. The residual tensile stresses of fibrous concrete, obtained through a simple formulation, has been used to: capture the enhancement of the compression chord contribution; the shear transferred by bridging effect of the fibres along the critical shear crack and by dowel action. The proposed model is shown to properly estimate the shear resistance of a large set of available test data, being able to account for most influencing parameters, like fibers types and amounts, concrete strength, longitudinal reinforcement ratios and beam geometry., This work is part of the Research Projects BIA2015-64672-C4-1-R, funded by the Spanish Ministry of Economy and competitiveness, and RTI2018-097314-B-C21, funded by The Spanish Ministry of Science and Innovation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Experimental response of fibre reinforced polymer (FRP) pretensioned concrete beams under 3-point bending tests

  • Ortiz Bernal, Galo Fabian|||0000-0002-9823-1637
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
The use of fibre-reinforced polymers (FRP) as active reinforcement in prestressed concrete structures remains limited, primarily due to the lack of specific design standards and the scarcity of experimental data. In this context, this study aims to enhance understanding of the flexural behaviour of FRP-prestressed concrete members, without shear reinforcement, when the critical shear region is flexurally cracked. An experimental program comprising 3-point bending tests was conducted on ten simply supported precast concrete beams pretensioned with FRP bars or strands. The investigated parameters were the type of reinforcement material— GFRP bars, CFRP bars, CFCC and steel strands—and the level of prestressing. Almost all beams failed due to a diagonal inclined shear crack. However, in some of them, the active reinforcement was almost reaching its ultimate strength. For most specimens, the lower stiffness of the FRP reinforcement combined with a low prestressing level, led to a pronounced increase in curvature and crack width, and a reduction of the neutral axis depth of up to 75% compared to the uncracked stage. Consequently, their shear capacity decreased to a much greater extent than its flexural capacity, leading to the observed shear failure. This behaviour has been theoretically reproduced by the Compression Chord Capacity Shear Model, combined with a nonlinear flexural analysis to determine the neutral axis depth. Beams prestressed with CFRP bars resisted 16% higher loads than those with GFRP bars at the same prestressing level, while CFCC strands showed performance comparable to steel strands. For CFCC prestressed beams, an increase in prestressing force by 25% resulted in a 23% higher load capacity. Results highlight the critical role of stiffness and prestressing level in ultimate strength and failure mode., The authors want to acknowledge the financial support provided by Spanish Ministry of Science and Innovation (MICIU/AEI/10.13039/501100011033) and by the European Funds for Regional Development in the following projects RTI2018-097314-B-C21, and PCI2023-143361. The first author would like to acknowledge to the Spanish for the PhD grant PRE2019-088919. The authors would like to acknowledge Sireg for their courtesy supplying the different FRP embedded reinforcement used in the experimental programs., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Modeling serviceability performance and ultimate capacity of corroded reinforced and prestressed concrete structures

  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
  • Oller Ibars, Eva|||0000-0002-0845-3587
  • Duarte Gómez, Noemí|||0000-0002-4542-8487
Corrosion reduces the area of reinforcement steel, affects its mechanical properties, the bond properties, and produces concrete cracking. Thus, reduction of the bearing capacity and stiffness, increments of deflections and redistribution of stresses and internal forces, in statically indeterminate structures, take place. In addition, the efficiency of strengthening systems of corroded structures depends on their state of stresses, strains and damage previously to strengthening. In this paper, a nonlinear and time dependent step by step analysis model for reinforced and prestressed concrete frames is presented. The model is capable of capturing the structural effects of corrosion and the effects of strengthening interventions, necessary to adequately assess corroded and strengthened structures. Several cases of corroded and strengthened structures are analyzed and the results discussed., The present work is part of research project RTI2018-097314-B-C21 funded by the Spanish Ministry of Science, Innovation and Universities through the Spanish Agency of Research (AEI), to whom the authors want to express their gratitude for the financial support received., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.2 - Per a 2030, proporcionar accés a sistemes de transport segurs, assequibles, accessi­bles i sostenibles per a totes les persones, i millorar la seguretat viària, en particular mitjan­çant l’ampliació del transport públic, amb especial atenció a les necessitats de les persones en situació vulnerable, dones, nenes, nens, persones amb discapacitat i persones grans, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.2 - Promoure una industrialització inclusiva i sostenible i, a tot tardar el 2030, augmentar de manera significativa la contribució de la indústria a l’ocupació i al producte interior brut, d’acord amb les circumstàncies nacionals, i duplicar aquesta contribució als països menys avançats, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.4 - Per a 2030, modernitzar les infraestructures i reconvertir les indústries perquè siguin sostenibles, usant els recursos amb més eficàcia i promovent l’adopció de tecnologies i processos industrials nets i racionals ambiental­ment, i aconseguint que tots els països adoptin mesures d’acord amb les capacitats respectives, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.a - Facilitar el desenvolupament d’infraestructures sostenibles i resilients als països en desenvolupament per mitjà de més suport financer, tecnològic i tècnic als països africans, països menys avançats, països en desenvolu­pament sense litoral i petits estats insulars en desenvolupament, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.1 - Per a 2030, assegurar l’accés de totes les persones a habitatges i a serveis bàsics adequats, segurs i assequibles, i millorar els barris marginal
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Theoretical model for the shear strength of prestressed concrete beams with FRP tendons

  • Oller Ibars, Eva
  • Murcia Delso, Juan
  • Marí Bernat, Antonio Ricardo
  • Legasa Melet, Tecla
This material may be downloaded for personal use only. Any other use requires prior permission of the American Society of Civil Engineers. This material may be found at https://ascelibrary.org/doi/abs/10.1061/JCCOF2.CCENG-4390., Prestressing tendons made of fiber-reinforced polymers (FRPs) are a promising alternative to conventional steel tendons in prestressed concrete structures owing to their corrosion resistance. However, the shear strength of FRP prestressed concrete beams is still not well understood. This paper presents a theoretical model for predicting the shear strength of prestressed concrete beams with FRP tendons or strands, with and without FRP shear reinforcement. The model is an extension of the compression chord capacity model (CCCM), originally proposed for steel-reinforced concrete structures, which has been adapted to account for the particularities of FRP as active and passive reinforcement. The model is applicable to rectangular, T, and I sections and accounts for reductions in shear strength caused by bond loss in FRP tendons. Experimental validation of the model was performed by comparing the theoretical predictions for 55 shear tests found in the literature. Good accuracy was obtained in predicting the ultimate shear capacity of beams and identifying shear bond failures observed in some tests., The study presented in this paper was developed in the scope of research projects RTI2018-097314-B-C21 and PID2021-123701OB-C21 funded by the Spanish Ministry of Science and Innovation and the European Regional Development Funds (ERDF)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Efficiency of shear strengthening of RC beams with externally bonded FRP materials: state-of-the-art in the experimental tests

  • Kotynia, Renata
  • Oller Ibars, Eva
  • Kaszubska, Monika
  • Marí Bernat, Antonio Ricardo
This paper presents a study of the shear capacity of reinforced concrete (RC) beams strengthened in shear with externally bonded (EB) fiber reinforced polymer (FRP) composites, based on the performance of existing published tests. The main objective of this study is to create a comprehensive overview of the performance of different shear strengthening configurations and the failure modes observed in experimental tests. In addition, the influence of the following parameters on the strengthening efficiency has been analyzed: shear span to depth ratio (a/d), existing steel transverse reinforcement ratio (ρsw), concrete strength (fck), size effect (d), longitudinal reinforcement ratio (ρsL), strengthening configurations, type of FRP: sheets or laminates (CFRP, GFRP), and FRP axial stiffness (AfEf)., This paper has been developed under the framework of the Research Projects “BIA2015‐64672‐C4‐1‐R” and “RTI2018‐097314‐BC21” funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and co‐funded by the European Regional Development Funds (ERDF). The authors would also like to thank the Cost Action TU1207 which funded a short term scientific mission of the second author in Lodz University of Technology., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Assessment of the existing models to evaluate the shear strength contribution of externally bonded FRP shear reinforcements

  • Oller Ibars, Eva
  • Kotynia, Renata
  • Marí Bernat, Antonio Ricardo
This paper presents an analysis of the performance of different existing formulations to quantify the FRP contribution to the shear strength of RC elements strengthened in shear by externally bonded FRP sheets. A large database of 555 tests has been assembled distinguishing between the shape of the section, the existence of internal transverse reinforcement and the FRP configurations. In general, predictions are more conservative for beams without transverse reinforcement. In addition, in some cases predictions are unsafe for beams with transverse reinforcement, showing a possible interaction with the internal transverse reinforcement which is not considered in the experimental FRP contribution to the shear strength. For wrapped FRP configurations, models generally assumed failure at the bottom corner of the section and results are very conservative in some cases where failure was experimentally observed along the web. For U-shaped and side-bonded configuration, results depend mainly on the assumed bond model and are more accurate than in the previous case, showing for some models unsafe predictions for the continuous FRP system applied in beams with transverse reinforcement., This paper has been developed under the framework of the Research Projects “BIA2015-64672-575 C4-1-R” and “RTI2018-097314-B-C21” funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and co-funded by the European Regional Development Funds (ERDF). The authors would also like to thank the Cost Action TU1207 which funded a short term scientific mission of the first author in Lodz University of Technology., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Experimental response of fibre reinforced polymer (FRP) pretensioned concrete beams under 3-point bending tests

  • Ortiz Bernal, Galo Fabian
  • Oller Ibars, Eva
  • Marí Bernat, Antonio Ricardo
The use of fibre-reinforced polymers (FRP) as active reinforcement in prestressed concrete structures remains limited, primarily due to the lack of specific design standards and the scarcity of experimental data. In this context, this study aims to enhance understanding of the flexural behaviour of FRP-prestressed concrete members, without shear reinforcement, when the critical shear region is flexurally cracked. An experimental program comprising 3-point bending tests was conducted on ten simply supported precast concrete beams pretensioned with FRP bars or strands. The investigated parameters were the type of reinforcement material— GFRP bars, CFRP bars, CFCC and steel strands—and the level of prestressing. Almost all beams failed due to a diagonal inclined shear crack. However, in some of them, the active reinforcement was almost reaching its ultimate strength. For most specimens, the lower stiffness of the FRP reinforcement combined with a low prestressing level, led to a pronounced increase in curvature and crack width, and a reduction of the neutral axis depth of up to 75% compared to the uncracked stage. Consequently, their shear capacity decreased to a much greater extent than its flexural capacity, leading to the observed shear failure. This behaviour has been theoretically reproduced by the Compression Chord Capacity Shear Model, combined with a nonlinear flexural analysis to determine the neutral axis depth. Beams prestressed with CFRP bars resisted 16% higher loads than those with GFRP bars at the same prestressing level, while CFCC strands showed performance comparable to steel strands. For CFCC prestressed beams, an increase in prestressing force by 25% resulted in a 23% higher load capacity. Results highlight the critical role of stiffness and prestressing level in ultimate strength and failure mode., The authors want to acknowledge the financial support provided by Spanish Ministry of Science and Innovation (MICIU/AEI/10.13039/501100011033) and by the European Funds for Regional Development in the following projects RTI2018-097314-B-C21, and PCI2023-143361. The first author would like to acknowledge to the Spanish for the PhD grant PRE2019-088919. The authors would like to acknowledge Sireg for their courtesy supplying the different FRP embedded reinforcement used in the experimental programs., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Strengthening of existing concrete structures with fibre reinforced polymers (FRP) in the new version of Eurocode 2, Refuerzo de estructuras existentes de hormigón con polímeros reforzados con fibras (PRF) en la nueva versión del Eurocódigo 2

  • Oller Ibars, Eva
  • de Diego, Ana
  • Torres Llinàs, Lluís
  • Madera, Pedro
This  paper  aims  to  introduce  the  content  of  Annex  J  “Strengthening  of  Existing  Concrete  Structures with CFRP” of Eurocode 2 [1]. This is first time that the design of adhesively bonded reinforcement  with  CFRP  has  been  introduced  in  the  European  regulations  through  an  informative annex. Annex J considers two different bonded strengthening techniques: externally bonded reinforcement (EBR) that consists of bonding CFRP strips or sheets to the surface of concrete elements, and near surface mounted reinforcement (NSM) that consists of embedded CFRP strips or rods to the slot cut in the concrete cover. Since, the content of Annex J is new, a summary  and  background  related  to  all  aspects  required  for  designing  CFRP  strengthened  systems for concrete structures, are given in this paper., The authors acknowledge the support provided by Spanish Ministry of Science and Innovation (MCIN/AEI) and by the European Funds for Regional Development in the following projects during their collaboration in the CTN140/SC2 and in the CEN/TC250/SC2/WG1/TG1 (Eva Oller): BIA2015‐64672‐C4‐1‐R, RTI2018‐097314‐B‐C21, and PID2020‐119015GB‐C22., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Mechanical model for the shear strength of steel fiber reinforced concrete (SFRC) beams without stirrups

  • Marí Bernat, Antonio Ricardo
  • Spinella, Nino
  • Recupero, Antonino
  • Cladera Bohigas, Antoni
The final publication is available at Springer via http://dx.doi.org/10.1617/s11527-020-01461-4., Numerous studies have shown that adding steel fibers to the concrete mixture improves both the shear strength and ductility of reinforced concrete beams. Most current shear design formulations for steel fiber reinforced concrete beams are empirically based and their predictions provide acceptable results when compared with tests results, but only in limited ranges of the parameters involved. On the other hand, many shear theoretical models suggested in the literature are derived by extending previous formulations for conventional reinforced concrete beams, just introducing the stresses transferred across the critical shear crack. Since the effects of steel fibers on the others shear resisting mechanisms are not accounted for, “adjusting” empirical factors must be used to fit the experimental results. There is, therefore, the need for developing mechanical models capable to rationally account for the effects of steel fibers on the global shear strength and on each shear resisting mechanisms. In this paper, the previously derived and validated Multi Action Shear Model for RC elements is extended to steel fiber reinforced concrete beams without stirrups. The effects of steel fibers on each resisting mechanism have been identified and incorporated in the formulation of each shear component and in the Multi-Action Shear Model equilibrium equations. The residual tensile stresses of fibrous concrete, obtained through a simple formulation, has been used to: capture the enhancement of the compression chord contribution; the shear transferred by bridging effect of the fibres along the critical shear crack and by dowel action. The proposed model is shown to properly estimate the shear resistance of a large set of available test data, being able to account for most influencing parameters, like fibers types and amounts, concrete strength, longitudinal reinforcement ratios and beam geometry., This work is part of the Research Projects BIA2015-64672-C4-1-R, funded by the Spanish Ministry of Economy and competitiveness, and RTI2018-097314-B-C21, funded by The Spanish Ministry of Science and Innovation., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A variable order framework for 3D nonlinear analysis of reinforced concrete frames under general loading

  • Poliotti, Mauro
  • Bairán García, Jesús Miguel
  • Moller, O.
A framework for the analysis of three-dimensional reinforced concrete frame structures, capable of reproducing general failure modes, is presented. A force-based model which guarantees the equilibrium between nodal and sectional forces is enhanced by means of a cross-sectional model. It is capable of capturing the complex coupling between all the internal forces. Consequently, different failure modes can be reproduced such as shear, torsional, flexural or axial failures. Material modeling of concrete is made using a plastic-damage model that incorporates a variable dilatancy parameter. The sectional and constitutive models are implemented in OpenSees. The sectional model can be used at each integration point of the force-based element. Alternatively, it can be used only where high coupling between the internal forces is expected, producing a variable order structural model. The validation shows that the frame element is capable of accurately reproduce beams and columns under monotonic and cyclic loads. The framework presented is a powerful numerical instrument for the analysis, design and assessment of reinforced concrete buildings and bridges., The first and second authors acknowledge the support provided by Spanish Ministry of Economy, Industry and Competitiveness and the European Regional Development Fund (ERDF), through the projects BIA2015-64672-C4-1R, BIA2012-36848 and RTI2018-097314-B-C21. The first author acknowledges the support of the Catalan Agency for University and Research through doctoral scholarship 2018FI-B1-00103. The third author acknowledges the support of the Research Council of Universidad Nacional de Rosario (CIUNR) and the Science and Technology Secretariat (SECyT), through the project 1ING601., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.a - Facilitar el desenvolupament d’infraestructures sostenibles i resilients als països en desenvolupament per mitjà de més suport financer, tecnològic i tècnic als països africans, països menys avançats, països en desenvolu­pament sense litoral i petits estats insulars en desenvolupament, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.b - Per a 2020, augmentar substancialment el nombre de ciutats i assentaments humans que adopten i posen en marxa polítiques i plans integrats per promoure la inclusió, l’ús eficient dels recursos, la mitigació del canvi climàtic i l’adaptació a aquest, així com la resiliència davant dels desastres, i desenvolupar i posar en pràctica una gestió integral dels riscos de desastre a tots els nivells, d’acord amb el Marc de Sendai per a la reducció del risc de desastres 2015.2030, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.5 - Per a 2030, reduir de forma significativa el nombre de morts causades per desastres, inclosos els relacio­nats amb l’aigua, i de persones afectades per aquests, i reduir substancialment les pèrdues econòmiques directes causades per desastres relacionades amb el producte interior brut mundial, fent un èmfasi especial en la protecció de les persones pobres i de les persones en situacions de vulnerabilitat, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Assessment of the efficiency of strengthening solutions in concrete structures by means of non-linear step by step analysis models, Evaluación de la eficiencia de soluciones de refuerzo en estructuras de hormigón mediante análisis no lineal evolutivo

  • Marí Bernat, Antonio Ricardo
  • Bairán García, Jesús Miguel
  • Oller Ibars, Eva
When designing a structural strengthening solution, the influence of the previous state of the structure on the capacity of the strengthened structure must be evaluated. In addition, strengthening interventions may involve operations such as partial unloading of the structure, placement and removal of temporary shores, application of loads or pre-deformations, restoring of damaged reinforcement or spalled con-crete or constraining of lateral strains. Therefore, changes in the cross-section geometry and reinforcement, longitudinal scheme, support conditions, loads and state of stresses and strains, may take place. Furthermore, occurrence of phenomena producing a premature failure or a change in the failure mode, should be avoided. In order to account for such a large variety of causes and phenomena affecting the structural response, a nonlinear and time-dependent analysis model of 3D reinforced and prestressed concrete frames, capable of capturing different failure modes and taking into account the structural history, is described. The model has been verified with tests on strengthened structures available in the literature and has been applied to an actually remodeled structure, comparing the advantages and disadvantages of two different strengthening proposals, showing its capabilities to assess the efficiency of structural strengthening systems., This paper is dedicated to the memory of an extraordinary engineer and human being, Luis Ortega Basagoiti, who was an example and reference for structural engineers and researchers along his professional career. The works described in this paper have been developed in the framework of the following research projects funded by the Spanish Science and Technology Ministries and by the European Funds for Regional Development, ADRESS (BIA2009-11764), REHABCAR (IPT-370000-2010-029), HORVITAL (BIA2015-64672-C4-1-R) and STRADURAVIUS (RTI2018-097314-B-C21)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Modeling serviceability performance and ultimate capacity of corroded reinforced and prestressed concrete structures

  • Marí Bernat, Antonio Ricardo
  • Bairán García, Jesús Miguel
  • Oller Ibars, Eva
  • Duarte Gómez, Noemí
Corrosion reduces the area of reinforcement steel, affects its mechanical properties, the bond properties, and produces concrete cracking. Thus, reduction of the bearing capacity and stiffness, increments of deflections and redistribution of stresses and internal forces, in statically indeterminate structures, take place. In addition, the efficiency of strengthening systems of corroded structures depends on their state of stresses, strains and damage previously to strengthening. In this paper, a nonlinear and time dependent step by step analysis model for reinforced and prestressed concrete frames is presented. The model is capable of capturing the structural effects of corrosion and the effects of strengthening interventions, necessary to adequately assess corroded and strengthened structures. Several cases of corroded and strengthened structures are analyzed and the results discussed., The present work is part of research project RTI2018-097314-B-C21 funded by the Spanish Ministry of Science, Innovation and Universities through the Spanish Agency of Research (AEI), to whom the authors want to express their gratitude for the financial support received., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.2 - Per a 2030, proporcionar accés a sistemes de transport segurs, assequibles, accessi­bles i sostenibles per a totes les persones, i millorar la seguretat viària, en particular mitjan­çant l’ampliació del transport públic, amb especial atenció a les necessitats de les persones en situació vulnerable, dones, nenes, nens, persones amb discapacitat i persones grans, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.2 - Promoure una industrialització inclusiva i sostenible i, a tot tardar el 2030, augmentar de manera significativa la contribució de la indústria a l’ocupació i al producte interior brut, d’acord amb les circumstàncies nacionals, i duplicar aquesta contribució als països menys avançats, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.4 - Per a 2030, modernitzar les infraestructures i reconvertir les indústries perquè siguin sostenibles, usant els recursos amb més eficàcia i promovent l’adopció de tecnologies i processos industrials nets i racionals ambiental­ment, i aconseguint que tots els països adoptin mesures d’acord amb les capacitats respectives, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.a - Facilitar el desenvolupament d’infraestructures sostenibles i resilients als països en desenvolupament per mitjà de més suport financer, tecnològic i tècnic als països africans, països menys avançats, països en desenvolu­pament sense litoral i petits estats insulars en desenvolupament, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.1 - Per a 2030, assegurar l’accés de totes les persones a habitatges i a serveis bàsics adequats, segurs i assequibles, i millorar els barris marginal, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Embedded fibre reinforced polymer (FRP) reinforcement in concrete structures according to the new version of Eurocode 2, Armadura de polímeros reforzados con fibras (PRF) para estructuras de hormigón en la nueva versión del Eurocódigo 2

  • Oller Ibars, Eva
  • Torres Llinàs, Lluís
  • de Diego, Ana
The new version of Eurocode 2 will include for the first time an informative annex, Annex R “Embedded FRP reinforcement”, to design reinforced concrete structures with fibre reinforced polymer (FRP) reinforcement. FRP embedded reinforcement has some advantages such as their low susceptibility to corrosion, high-strength, and low life-cycle cost. FRP rebars can be used as longitudinal or transverse reinforcement in a similar way than conventional steel rebars. However, in the design of FRP reinforced concrete structures, some particular aspects related to the reinforcement properties must be taken into account, among which it is worth highlighting their linear elastic behaviour until failure, their relatively low modulus of elasticity or their behaviour under sustained stresses. Since, the content of Annex R is new, a summary and background related to all aspects required for designing with FRP reinforcement are given in this paper., The authors acknowledge the support provided by Spanish Ministry of Science and Innovation (MCIN/  AEI)  and  by  the  European  Funds  for  Regional  Development  in  the  following  projects  during their collaboration in the TN140/SC2 and in the CEN/TC250/SC2/WG1/TG1 (Eva Oller): BIA2015‐64672‐C4‐1‐R, RTI2018‐097314‐B‐C21, and PID2020‐119015GB‐C22., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Mechanical model for the shear strength prediction of corrosion-damaged reinforced concrete slender and non slender beams

  • Cladera Bohigas, Antoni
  • Marí Bernat, Antonio Ricardo
  • Ribas González, Carlos Rodrigo
Steel corrosion in RC structures leads to a reduced reinforcement area, changes in steel mechanical properties, cracking and, eventually, concrete cover spalling, among other phenomena. Stirrups are generally small in diameter and, given their small concrete cover, they are more susceptible to corrosion than longitudinal reinforcement. Hence their corrosion significantly affects shear strength. Most existing models that deal with reduction in the shear strength of corrosion-damaged reinforced concrete (RC) structures are empirical; that is, they have been numerically fitted to test results. In this context, conceptual models based on structural mechanics principles and verified for corrosion-damaged members are still needed. In this paper, the Compression Chord Capacity Model (CCCM), a shear mechanical model previously derived by the authors, is adapted to predict the shear strength of corrosion-damaged RC beams. For this purpose, the model parameters that can be affected by steel corrosion in RC beams were identified and modified accordingly. CCCM predictions were compared to the experimental results of 146 slender and non slender beams failing in shear, in which stirrups and/or longitudinal reinforcement was subjected to corrosion. The CCCM achieved very satisfactory shear strength predictions when reductions in reinforcement areas and web width were taken into account, with a mean value of the Vtest/Vpred ratio equaling 1.19 and a 19.5% coefficient of variation. Finally, a parametric analysis was performed to show the predicted reductions in shear strength according to the CCCM compared to the experimental results of some especially relevant tests., The authors wish to acknowledge the financial support provided by the Spanish Ministry of Science, Innovation and Universities and European Funds for Regional Development (EU ERDF) through Research projects: RTI2018-099091-B-C22 (AEI/FEDER, UE) and RTI2018-097314-B-C21 (AEI/FEDER, UE)., Peer Reviewed, Postprint (published version)