Skip to main content

TECNICAS PARA LA ACELERACION Y MEJORA DE APLICACIONES MULTIMEDIA Y HPC

RTI2018-098156-B-C54

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD MIGUEL HERNANDEZ DE ELCHE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A hybrid genetic algorithm to reduce the radiation dose in CR images

  • Sánchez, M. G.
  • Fajardo-Delgado, D.
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The quality of computed radiography (CR) images typically relate to patient radiation exposure. The lower the X-ray dose exposure, the higher the level of inherent noise in the CR images. In this work, we address the noise reduction problem by using an estimation of the standard deviation in CR images as an objective function to minimize. We propose a hybrid genetic algorithm for this aim, which produces improved versions of CR images. We also applied an edge-detection method based on the Canny algorithm to preserve the edges of the original CR images. We executed our proposed algorithm for CR images obtained under different radiation exposures. Experimental results show that our solution improves lower radiation CR images reaching a quality as similar to those with higher radiation doses., This research has been supported by the Universitat Politecnica de Valencia, Generalitat Valenciana, under PROMETEO/2018/035 co-financed by FEDER funds (Spain). M. Sanchez and D. Fajardo-Delgado gratefully acknowledge the financial support from PRODEP and TecNM (Mexico) under grants 511-6/17-8931 (ITCGUZ-CA-7) and 5826.19-P, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Parallel Fuzzy Algorithm for Real-Time Medical Image Enhancement

  • Arnal, Josep
  • Súcar, Luis B.
  • CHILLARÓN-PÉREZ, MÓNICA|||0000-0002-7611-8908
  • PARCERO IGLESIAS, ESTIBALIZ|||0000-0002-5155-2900
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
[EN] Medical images may be corrupted by noise. This noise affects the image quality and can obscure important information required for accurate diagnosis. Effectively apply filtering techniques can facilitate diagnosis or reduce radiation exposure. In this paper, we introduce a parallel method designed to reduce mixed Gaussian-impulse noise from digital images. The method uses fuzzy logic and the fuzzy peer group concept. Implementations of the method on multi-core interface using the open multi-processing (OpenMP) and on graphics processing units (GPUs) using CUDA are presented. Efficiency is measured in terms of execution time and in terms of MAE, PSNR and SSIM over medical images from the mini-MIAS database and over computed radiography (CR) images generated at different exposure levels. These images have been contaminated with impulsive and/or Gaussian noise. Experiments show that the proposed method obtains good performance in terms of the above mentioned objective quality measures. After applying multi-core and GPUs optimization strategies, the observed time shows that the new filter allows to remove mixed Gaussian-impulse noise in real-time., This research was supported by the Spanish Ministry of Science, Innovation and Universities (Grant RTI2018-098156-B-C54) co-financed by FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A General Model for the Design of Efficient Sign-Coding Tools for Wavelet-Based Encoders

  • López-Granado, Otoniel Mario
  • Martínez-Rach, Miguel Onofre
  • Cruz-Chávez, Marco Antonio
  • Pérez Malumbres, Manuel
  • Martí-Campoy, Antonio|||0000-0002-6009-8703
[EN] Traditionally, it has been assumed that the compression of the sign of wavelet coefficients is not worth the effort because they form a zero-mean process. However, several image encoders such as JPEG 2000 include sign-coding capabilities. In this paper, we analyze the convenience of including sign-coding techniques into wavelet-based image encoders and propose a methodology that allows the design of sign-prediction tools for whatever kind of wavelet-based encoder. The proposed methodology is based on the use of metaheuristic algorithms to find the best sign prediction with the most appropriate context distribution that maximizes the resulting sign-compression rate of a particular wavelet encoder. Following our proposal, we have designed and implemented a sign-coding module for the LTW wavelet encoder, to evaluate the benefits of the sign-coding tool provided by our proposed methodology. The experimental results show that sign compression can save up to 18.91% of bit-rate when enabling sign-coding capabilities. Also, we have observed two general behaviors when coding the sign of wavelet coefficients: (a) the best results are provided from moderate to high compression rates; and (b) the sign redundancy may be better exploited when working with high-textured images., This research was supported by the Spanish Ministry of Economy and Competitiveness under Grant RTI2018-098156-B-C54, co-financed by FEDER funds (MINECO/FEDER/UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

CT image reconstruction with SuiteSparseQR factorization package

  • CHILLARÓN-PÉREZ, MÓNICA|||0000-0002-7611-8908
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] SuiteSparseQR is a factorization package for sparse matrices oriented to parallelism in multicore architectures. It employs BLAS and LAPACK as well as Intel's Threading Building Blocks to achieve high performance. Through the SPQR method implemented in this package we can use the QR decomposition to reconstruct CT images efficiently. In this paper, we analyze the behavior of the package applied to the reconstruction of medical CT images, studying the quality of the obtained image. To this purpose, we use the image dataset DeepLesion, which provides various CT studies of different lesions in different organs or tissues. We also compare it to our previous iterative reconstruction method called LSQR. This new method is promising since the computations are simplified if we compare it to the iterative options and the reconstructions are high-quality, as the results show., This research has been supported by "Universitat Politecnica de Valencia", "Generalitat Valenciana" under PROMETEO/2018/035 co-financed by FEDER funds, as well as ACIF/2017/075 predoctoral grant, and the "Spanish Ministry of Economy and Competitiveness" under Grant TIN2015-66972-05-4-R and TIAMHA co-financed by FEDER funds
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Computed tomography medical image reconstruction on affordable equipment by using Out-Of-Core techniques

  • CHILLARÓN-PÉREZ, MÓNICA|||0000-0002-7611-8908
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Quintana Ortí, Gregorio
[EN] Background and objective: As Computed Tomography scans are an essential medical test, many techniques have been proposed to reconstruct high-quality images using a smaller amount of radiation. One approach is to employ algebraic factorization methods to reconstruct the images, using fewer views than the traditional analytical methods. However, their main drawback is the high computational cost and hence the time needed to obtain the images, which is critical in the daily clinical practice. For this reason, faster methods for solving this problem are required. Methods: In this paper, we propose a new reconstruction method based on the QR factorization that is very efficient on affordable equipment (standard multicore processors and standard Solid-State Drives) by using Out-Of-Core techniques. Results: Combining both affordable hardware and the new software proposed in our work, the images can be reconstructed very quickly and with high quality. We analyze the reconstructions using real Computed Tomography images selected from a dataset, comparing the QR method to the LSQR and FBP. We measure the quality of the images using the metrics Peak Signal-To-Noise Ratio and Structural Similarity Index, obtaining very high values. We also compare the efficiency of using spinning disks versus Solid-State Drives, showing how the latter performs the Input/Output operations in a significantly lower amount of time. Conclusions: The results indicate that our proposed me thod and software are valid to efficiently solve large-scale systems and can be applied to the Computed Tomography reconstruction problem to obtain high-quality images., This research has been supported by "Universitat Politecnica de Valencia", "Generalitat Valenciana" under PROMETEO/2018/035 and ACIF/2017/075, co-financed by FEDER and FSE funds, and the "Spanish Ministry of Science, Innovation and Universities" under Grant RTI2018-098156-B-C54 co-financed by FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of image filters for their integration with LSQR computerized tomography reconstruction method

  • CHILLARÓN-PÉREZ, MÓNICA|||0000-0002-7611-8908
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] In CT (computerized tomography) imaging reconstruction, the acquired sinograms are usually noisy, so artifacts will appear on the resulting images. Thus, it is necessary to find the adequate filters to combine with reconstruction methods that eliminate the greater amount of noise possible without altering in excess the information that the image contains. The present work is focused on the evaluation of several filtering techniques applied in the elimination of artifacts present in CT sinograms. In particular, we analyze the elimination of Gaussian and Speckle noise. The chosen filtering techniques have been studied using four functions designed to measure the quality of the filtered image and compare it with a reference image. In this way, we determine the ideal parameters to carry out the filtering process on the sinograms, prior to the process of reconstruction of the images. Moreover, we study their application on reconstructed noisy images when using noisy sinograms and finally we select the best filter to combine with an iterative reconstruction method in order to test if it improves the quality of the images. With this, we can determine the feasibility of using the selected filtering method for our CT reconstructions with projections reduction, concluding that the bilateral filter is the filter that behaves best with our images. We will test it when combined with our iterative reconstruction method, which consists on the Least Squares QR method in combination with a regularization technique and an acceleration step, showing how integrating this filter with our reconstruction method improves the quality of the CT images., This research has been supported by "Universitat Politecnica de Valencia", "Generalitat Valenciana" under PROMETEO/2018/035 as well as ACIF/2017/075 predoctoral grant co-financed by FEDER and FSE funds, and "Spanish Ministry of Science, Innovation and Universities" under Grant RTI2018-098156-B-C54 co-financed by FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High-performance reconstruction of CT medical images by using out-of-core methods in GPU

  • Quintana-Ortí, Gregorio
  • CHILLARÓN-PÉREZ, MÓNICA|||0000-0002-7611-8908
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] Background and objective: Since Computed Tomography (CT) is one of the most widely used medical imaging tests, it is essential to work on methods that reduce the radiation the patient is exposed to. Although there are several possible approaches to achieve this, we focus on reducing the exposure time through sparse sampling. With this approach, efficient algebraic methods are needed to be able to generate the images in real time, and since their computational cost is high, using high-performance computing is essential. Methods: In this paper we present a GPU (Graphics Processing Unit) software for solving the CT image reconstruction problem using the QR factorization performed with out-of-core (OOC) techniques. This implementation is optimized to reduce the data transfer times between disk, CPU, and GPU, as well as to overlap input/output operations and computations. Results: The experimental study shows that a block cache stored on main page-locked memory is more efficient than using a cache on GPU memory or mirroring it in both GPU and CPU memory. Compared to a CPU version, this implementation is up to 6.5 times faster, providing an improved image quality when compared to other reconstruction methods. Conclusions: The software developed is an optimized version of the QR factorization for GPU that allows the algebraic reconstruction of CT images with high quality and resolution, with a performance that can be compared with state-of-the-art methods used in clinical practice. This approach allows reducing the exposure time of the patient and thus the radiation dose., This research has been supported by the "Universitat Politecnica de Valencia", "Generalitat Valenciana" under PROMETEO/2018/035 and ACIF/2017/075, co-financed by FEDER and FSE funds, and the "Spanish Ministry of Science, Innovation and Universities" under Grant RTI2018-098156-B-C54 co-financed by FEDER funds. The authors would also like to thank Francisco D. Igual (Universidad Complutense de Madrid) for granting access to the volta1 server.