Skip to main content

TECNICAS PARA LA MEJORA DE LAS APLICACIONES MULTIMEDIA Y COMPUTACION MATRICIAL

TIN2015-66972-C5-4-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD MIGUEL HERNANDEZ DE ELCHE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Estudio Multiparamétrico para Reconstrucción de Imágenes de TAC Empleando el Método LSQR con Pocas Vistas

  • CHILLARÓN-PÉREZ, MÓNICA|||0000-0002-7611-8908
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Costa Lacuesta, Iván
  • Morato Rafet, Sergio
Para la reconstrucción de imágenes de TAC (Tomografía Axial Computarizada) existen diversos métodos a utilizar. El método objeto de este estudio es el LSQR utilizando pocas vistas, que combinado con un proceso de filtrado y aceleración permite obtener reconstrucciones de buena calidad exponiendo al paciente a menos radiación. En este trabajo se ha realizado un estudio multiparamétrico en un entorno Grid para determinar los parámetros óptimos de dicho método, y comparar la calidad de las imágenes obtenidas tras la reconstrucción con determinado número de vistas., Este trabajo fue soportado por el proyecto ANITRAN PROMETEOII/2014/008 de la Generalitat Valenciana de España, por el Ministerio de Economía y Competitividad español con la subvención TIN2015-66972-C5-4-R cofinanciado por fondos FEDER y ENE2014-59442-P-AR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A hybrid genetic algorithm to reduce the radiation dose in CR images

  • Sánchez, M. G.
  • Fajardo-Delgado, D.
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The quality of computed radiography (CR) images typically relate to patient radiation exposure. The lower the X-ray dose exposure, the higher the level of inherent noise in the CR images. In this work, we address the noise reduction problem by using an estimation of the standard deviation in CR images as an objective function to minimize. We propose a hybrid genetic algorithm for this aim, which produces improved versions of CR images. We also applied an edge-detection method based on the Canny algorithm to preserve the edges of the original CR images. We executed our proposed algorithm for CR images obtained under different radiation exposures. Experimental results show that our solution improves lower radiation CR images reaching a quality as similar to those with higher radiation doses., This research has been supported by the Universitat Politecnica de Valencia, Generalitat Valenciana, under PROMETEO/2018/035 co-financed by FEDER funds (Spain). M. Sanchez and D. Fajardo-Delgado gratefully acknowledge the financial support from PRODEP and TecNM (Mexico) under grants 511-6/17-8931 (ITCGUZ-CA-7) and 5826.19-P, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

CT image reconstruction with SuiteSparseQR factorization package

  • CHILLARÓN-PÉREZ, MÓNICA|||0000-0002-7611-8908
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] SuiteSparseQR is a factorization package for sparse matrices oriented to parallelism in multicore architectures. It employs BLAS and LAPACK as well as Intel's Threading Building Blocks to achieve high performance. Through the SPQR method implemented in this package we can use the QR decomposition to reconstruct CT images efficiently. In this paper, we analyze the behavior of the package applied to the reconstruction of medical CT images, studying the quality of the obtained image. To this purpose, we use the image dataset DeepLesion, which provides various CT studies of different lesions in different organs or tissues. We also compare it to our previous iterative reconstruction method called LSQR. This new method is promising since the computations are simplified if we compare it to the iterative options and the reconstructions are high-quality, as the results show., This research has been supported by "Universitat Politecnica de Valencia", "Generalitat Valenciana" under PROMETEO/2018/035 co-financed by FEDER funds, as well as ACIF/2017/075 predoctoral grant, and the "Spanish Ministry of Economy and Competitiveness" under Grant TIN2015-66972-05-4-R and TIAMHA co-financed by FEDER funds
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Análisis de Matriz del Sistema para TAC

  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Flores, Liubov Alexandrovna
En aplicaciones prácticas de tomografía computarizada a menudo el conjunto de proyecciones es incompleto debido a las condiciones físicas durante el proceso de adquisición de datos. Otro problema importante, es reducir la dosis de radiación en pacientes. Estos problemas requieren la reconstrucción de imágenes por un conjunto limitado de proyecciones. Por esta razón, los métodos iterativos están siendo utilizados cada vez más por los investigadores del campo de reconstrucción de imágenes. En este trabajo, resolvemos el problema de reconstrucción por menos número de proyecciones y analizamos como la solución del problema depende de la generación de los elementos de la matriz del sistema que simula el proceso de escaneo, Este trabajo fue soportadopor el proyecto ANITRAN PROMETEOII/2014/008 de la Generalitat Valenciana de España y por el Ministerio de Economía y Competitividad español con la subvención TIN2015-66972-C5-4-R cofinanciado por fondos FEDER.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Análisis y desarrollo de algoritmos de altas prestaciones para reconstrucción de imagen médica TAC 3D basados en la reducción de dosis.

  • CHILLARÓN-PÉREZ, MÓNICA|||0000-0002-7611-8908
[ES] La prueba médica de Tomografía Computarizada (TC) es esencial actualmente en la práctica clínica para el diagnóstico y seguimiento de múltiples enfermedades y lesiones, siendo una de las pruebas de imagen médica más importante por la gran cantidad de información que es capaz de aportar. Sin embargo, a diferencia de otros métodos de diagnóstico por imagen que son inocuos, la prueba de TC utiliza rayos X, que son ionizantes, por lo que suponen un riesgo para los pacientes. Es por ello que es necesario desarrollar métodos que permitan reducir la dosis de radiación a la que se expone a los pacientes que se realizan un estudio, sin comprometer la calidad de imagen puesto que sino se estaría sometiendo a un riesgo a estas personas sin que un diagnóstico de calidad esté garantizado. Durante el desarrollo de esta tesis se han investigado métodos de reconstrucción de imagen TC que se basan en reducir el número de proyecciones usadas, con el objetivo de reducir el tiempo de exposición a los rayos X. Esta estrategia de reducción de dosis está en fase de investigación, a diferencia de otras que están implantadas en la práctica clínica y ya han sido desarrolladas por los propios fabricantes de los escáneres. Por tanto, nos hemos centrado en los llamados métodos algebraicos de reconstrucción, que son los más apropiados para este tipo de adquisición de proyecciones puesto que son capaces de trabajar con menos información que los métodos clásicos conservando una buena calidad de imagen. En concreto, se ha estudiado a fondo el comportamiento del método LSQR para la resolución de este problema, combinado con una técnica de filtrado llamada Soft Thresholding Filter y una técnica de aceleración llamada FISTA. Además, se ha introducido el filtro de imagen Bilateral que es capaz de mejorar la calidad de las imágenes cuando se combina con los métodos anteriores. El estudio multiparamétrico realizado se ha llevado a cabo en un entorno de computación distribuida Grid, para analizar cómo los distintos parámetros que intervienen en el proceso de reconstrucción pueden influir sobre la imagen resultado. Dicho estudio se ha diseñado para hacer uso de la potencia de cómputo de la plataforma distribuida aunque el software que se necesita no esté disponible. La instalación de dicho software se puede realizar en el tiempo de ejecución de los trabajos, o en se puede empaquetar en una imagen que estará instalada en un contenedor Docker, lo que es una opción muy interesante para sistemas donde no tengamos privilegios. El esquema seguido para la creación y lanzamiento de los trabajos es fácilmente reproducible. Por otra parte, se han planteado dos métodos algebraicos directos para la reconstrucción de TC basados en la factorización de la matriz que modela el sistema. El primero es el método SVD, que se ha probado mediante la librería SLEPc, obteniendo mayores tasas de uso de memoria principal, por lo que ha sido descartado en favor del método QR. La primera aproximación a la resolución se ha hecho mediante la librería SuiteSparseQR, desarrollando después un método propio siguiendo la técnica Out-Of-Core que permite almacenar las matrices en el propio disco duro en lugar de cargarlas en memoria, por lo que el tamaño del problema puede aumentar sin que el coste del hardware sea muy alto. Dicho método obtiene reconstrucciones de alta calidad cuando el rango de la matriz factorizada es completo. En los resultados se muestra como para una resolución alta, garantizar el rango completo todavía supone una reducción del número de proyecciones con respecto a métodos tradicionales. Por tanto, en esta tesis se ha llevado a cabo la investigación y el posterior desarrollo mediante librerías y técnicas de computación de Altas Prestaciones de varios métodos algebraicos de reconstrucción de TC basados en la reducción de proyecciones que permiten mantener una buena calidad de imagen. Dichos métodos han sido optimizados para lograr los menores tiempos de reconstrucción posibles, con el fin de hacerlos competitivos y que algún día puedan ser instaurados en la práctica clínica., [CA] Actualment, la prova mèdica de tomografia computeritzada (TC) és essencial en la pràctica clínica per al diagnòstic i el seguiment de múltiples malalties i lesions, sent una de les proves d'imatge mèdica més importants a causa de la gran quantitat d'informació que és capaç d'oferir. Tanmateix, a diferència d'altres mètodes d'imatge médica, la prova CT utilitza raigs X, que són ionitzants i suposen un risc per als pacients. Per això, és necessari desenvolupar mètodes que permetin reduir la dosi de radiació a la qual estan exposats els pacients sotmesos a un estudi, sense comprometre la qualitat de la imatge, ja que en cas contrari estarien sotmetent a aquestes persones a un risc sense que es garantís l'avantatge d'un diagnòstic d'alta qualitat. Durant el desenvolupament d'aquesta tesi, s'han investigat diversos mètodes de reconstrucció d'imatges CT basats en la reducció del nombre de projeccions utilitzades, amb l'objectiu de reduir el temps d'exposició als raigs X. Aquesta estratègia de reducció de dosis es troba en fase investigació, a diferència d'altres que s'implementen a la pràctica clínica i que ja han estat desenvolupades pels propis fabricants d'escàners. Per tant, ens hem centrat en els anomenats mètodes de reconstrucció algebraica, que són els més adequats per a aquest tipus d'adquisició de projecció, ja que són capaços de treballar amb menys informació que els mètodes clàssics mantenint una bona qualitat d'imatge. Concretament, s'ha estudiat a fons el comportament del mètode LSQR per resoldre aquest problema, combinat amb una tècnica de filtratge anomenada Soft Thresholding Filter i una tècnica d'acceleració anomenada FISTA. A més, s'ha introduït un filtre d'imatges anomenat filtre bilateral, que és capaç de millorar la qualitat de les imatges quan es combina amb els mètodes anteriors. L'estudi multiparamètric de LSQR es va dur a terme en un entorn informàtic distribuït Grid, per analitzar com els diferents paràmetres implicats en el procés de reconstrucció poden influir en la imatge resultant. Aquest estudi ha estat dissenyat per fer ús de la potència de càlcul de la plataforma distribuïda encara que el programari requerit no estigui disponible. La instal·lació d'aquest programari es pot fer en el moment d'executar els treballs o es pot empaquetar en una imatge que s'instal·larà en un contenidor Docker, que és una opció molt interessant per a sistemes on no tenim privilegis. L'esquema seguit per a la creació i el llançament dels treballs es pot reproduir fàcilment per a estudis multiparamètrics d'aquest tipus. D'altra banda, s'han proposat dos mètodes algebraics directes per a la reconstrucció CT basats en la factorització de la matriu que modela el sistema. El primer és el mètode SVD, que s'ha provat mitjançant la biblioteca SLEPc, obtenint taxes d'ús més alt de memòria principal, motiu pel qual s'ha descartat a favor del mètode QR. La primera aproximació a la resolució s'ha fet a través de la biblioteca SuiteSparseQR, desenvolupant posteriorment la nostra pròpia implementació mitjançant la tècnica Out-Of-Core que permet emmagatzemar les matrius al disc dur en lloc de carregar-les a la memòria, de manera que la mida de el problema pot augmentar sense que el cost del maquinari sigui molt alt. Aquest mètode obté reconstruccions d'alta qualitat quan el rang de la matriu factoritzada és complet. En els resultats es demostra que per a una alta resolució, garantir el rang complet encara significa una reducció del nombre de projeccions en comparació amb els mètodes tradicionals. Per tant, en aquesta tesi s'ha dut a terme la investigació i el desenvolupament posterior de diversos mètodes de reconstrucció algebraica de CT mitjançant biblioteques i tècniques de computació d'altes prestacions. Aquests mètodes basats en la reducció de projeccions, que permeten mantenir una bona qualitat d’imatge, s’han optimitzat per aconseguir els temps de reconstrucció més breus possibles, per tal de fer-los competitius perquè algun dia puguin implementarse a la pràctica clínica., [EN] The Computerized Tomography (CT) medical test is currently essential in clinical practice for the diagnosis and monitoring of multiple diseases and injuries, being one of the most important medical imaging tests due to the large amount of information it is capable of providing. However, unlike other safe imaging methods, the CT test uses X-rays, which are ionizing, posing a risk to patients. That is why it is necessary to develop methods that allow reducing the radiation dose to which patients undergoing a study are exposed, without compromising image quality since otherwise they would be subjecting these people to a risk without the benefit of a high-quality diagnosis being guaranteed. During the development of this thesis, several CT image reconstruction methods that are based on reducing the number of projections used have been investigated, with the aim of reducing the time of exposure to X-rays. This dose reduction strategy is in research phase, unlike others that are implemented in clinical practice and have already been developed by the scanner manufacturers themselves. Therefore, we have focused on the algebraic reconstruction methods, which are the most appropriate for this type of projection acquisition since they are capable of working with less information than the classical methods while maintaining good image quality. Specifically, the behavior of the LSQR method to solve this problem has been thoroughly studied, combined with a filtering technique called Soft Thresholding Filter and an acceleration technique called FISTA. In addition, the so-called Bilateral filter has been introduced, which is capable of improving the quality of images when combined with the above methods. The multiparametric LSQR study was carried out in a Grid distributed computing environment, to analyze how the different parameters involved in the reconstruction process can influence the resulting image. This study has been designed to make use of the computing power of the distributed platform even if the software required is not available. The installation of said software can be done at the time of execution of the jobs, or it can be packaged in an image that will be installed in a Docker container, which is a very interesting option for systems where we do not have privileges. The scheme followed for the creation and launch of the jobs is easily reproducible for multiparametric studies of this type. On the other hand, two direct algebraic methods have been proposed for CT reconstruction based on the factorization of the matrix that models the system. The first is the SVD method, which has been tested using the SLEPc library, obtaining higher rates of main memory usage, which is why it has been discarded in favor of the QR method. The first approximation to the resolution has been made through the SuiteSparseQR library, later developing our own implementation using the Out-Of-Core technique that allows the matrices to be stored on the hard drive itself instead of loading them in memory, so the size of the problem can increase without the cost of the hardware being very high. This method obtains high-quality reconstructions when the rank of the factored matrix is complete. In the results it is shown that for a high resolution, guaranteeing the full rank still means a reduction in the number of projections compared to traditional methods. Therefore, in this thesis, research and subsequent development of several algebraic CT reconstruction methods has been carried out using libraries and High Performance Computing techniques. These methods based on the reduction of projections, which allows maintaining good image quality, and have been optimized to achieve the shortest possible reconstruction times, in order to make them competitive so that one day they can be implemented in clinical practice., This research has been supported by Universitat Politècnica de València and partially funded by TIN2015-66972-C5-4-R, ENE2014-59442-P-AR and TIN2013-44390-R projects of the "Ministerio de Economía y Competitividad" of Spain, as well as the Spanish ”Generalitat Valenciana” PROMETEOII/2014/008, PROMETEO/2018/035 projects and ACIF/2017/075 predoctoral grant. This work has also been co-financed by FEDER and FSE funds, and the “Spanish Ministry of Science, Innovation and Universities” under Grant RTI2018-098156-B-C54
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

CT Medical Imaging Reconstruction Using Direct Algebraic Methods with Few Projections

  • Chillarón, Mónica
  • Vidal, Vicente
  • Verdú, Gumersindo
  • Arnal, Josep
  • Arnal, Josep|||/items/c26299fe-8dcb-4732-be9c-4b8cf6bc87d4
In the field of CT medical image reconstruction, there are two approaches you can take to reconstruct the images: the analytical methods, or the algebraic methods, which can be divided into iterative or direct. Although analytical methods are the most used for their low computational cost and good reconstruction quality, they do not allow reducing the number of views and thus the radiation absorbed by the patient. In this paper, we present two direct algebraic approaches for CT reconstruction: performing the Sparse QR (SPQR) factorization of the system matrix or carrying out a singular values decomposition (SVD). We compare the results obtained in terms of image quality and computational time cost and analyze the memory requirements for each case.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Multipopulation-based multi-level parallel enhanced Jaya algorithms

  • Migallón Gomis, Héctor
  • Jimeno-Morenilla, Antonio
  • Sanchez-Romero, Jose-Luis
  • Rico, Héctor
  • Rao, Ravipudi Venkata
  • Jimeno-Morenilla, Antonio|||/items/5a277765-a179-4393-b7b3-c50ac73dd59f
  • Sanchez-Romero, Jose-Luis|||/items/5615442e-4cfb-4a26-81e8-c54900dae552
To solve optimization problems, in the field of engineering optimization, an optimal value of a specific function must be found, in a limited time, within a constrained or unconstrained domain. Metaheuristic methods are useful for a wide range of scientific and engineering applications, which accelerate being able to achieve optimal or near-optimal solutions. The metaheuristic method called Jaya has generated growing interest because of its simplicity and efficiency. We present Jaya-based parallel algorithms to efficiently exploit cluster computing platforms (heterogeneous memory platforms). We propose a multi-level parallel algorithm, in which, to exploit distributed-memory architectures (or multiprocessors), the outermost layer of the Jaya algorithm is parallelized. Moreover, in internal layers, we exploit shared-memory architectures (or multicores) by adding two more levels of parallelization. This two-level internal parallel algorithm is based on both a multipopulation structure and an improved heuristic search path relative to the search path of the sequential algorithm. The multi-level parallel algorithm obtains average efficiency values of 84% using up to 120 and 135 processes, and slightly accelerates the convergence with respect to the sequential Jaya algorithm.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Efficient Subpopulation Based Parallel TLBO Optimization Algorithms

  • García-Monzó, Alejandro
  • Migallón Gomis, Héctor
  • Jimeno-Morenilla, Antonio
  • Sanchez-Romero, Jose-Luis
  • Rico, Héctor
  • Rao, Ravipudi Venkata
  • Jimeno-Morenilla, Antonio|||/items/5a277765-a179-4393-b7b3-c50ac73dd59f
  • Sanchez-Romero, Jose-Luis|||/items/5615442e-4cfb-4a26-81e8-c54900dae552
A numerous group of optimization algorithms based on heuristic techniques have been proposed in recent years. Most of them are based on phenomena in nature and require the correct tuning of some parameters, which are specific to the algorithm. Heuristic algorithms allow problems to be solved more quickly than deterministic methods. The computational time required to obtain the optimum (or near optimum) value of a cost function is a critical aspect of scientific applications in countless fields of knowledge. Therefore, we proposed efficient algorithms parallel to Teaching-learning-based optimization algorithms. TLBO is efficient and free from specific parameters to be tuned. The parallel proposals were designed with two levels of parallelization, one for shared memory platforms and the other for distributed memory platforms, obtaining good parallel performance in both types of parallel architectures and on heterogeneous memory parallel platforms.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Jaya optimization algorithm with GPU acceleration

  • Jimeno-Morenilla, Antonio
  • Sanchez-Romero, Jose-Luis
  • Migallón Gomis, Héctor
  • Mora, Higinio
  • Jimeno-Morenilla, Antonio|||/items/5a277765-a179-4393-b7b3-c50ac73dd59f
  • Mora, Higinio|||/items/77871521-ed51-42c5-9240-dca1930db8e5
  • Sanchez-Romero, Jose-Luis|||/items/5615442e-4cfb-4a26-81e8-c54900dae552
Optimization methods allow looking for an optimal value given a specific function within a constrained or unconstrained domain. These methods are useful for a wide range of scientific and engineering applications. Recently, a new optimization method called Jaya has generated growing interest because of its simplicity and efficiency. In this paper, we present the Jaya GPU-based parallel algorithms we developed and analyze both parallel performance and optimization performance using a well-known benchmark of unconstrained functions. Results indicate that parallel Jaya implementation achieves significant speed-up for all benchmark functions, obtaining speed-ups of up to 190×, without affecting optimization performance.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Parallel two-stage algorithms for solving the PageRank problem

  • Migallón Gomis, Héctor
  • Migallón, Violeta
  • Penadés, Jose
  • Migallón, Violeta|||/items/19db1ff4-dc48-424b-b2ea-0522ff049c8a
  • Penadés, Jose|||/items/2f533297-8ae6-4b05-9fb6-1bb85696f056
In this work we present parallel algorithms based on the use of two-stage methods for solving the PageRank problem as a linear system. Different parallel versions of these methods are explored and their convergence properties are analyzed. The parallel implementation has been developed using a mixed MPI/OpenMP model to exploit parallelism beyond a single level. In order to investigate and analyze the proposed parallel algorithms, we have used several realistic large datasets. The numerical results show that the proposed algorithms can speed up the time to converge with respect to the parallel Power algorithm and behave better than other well-known techniques.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A heuristic relaxed extrapolated algorithm for accelerating PageRank

  • Migallón Gomis, Héctor
  • Migallón, Violeta
  • Palomino Benito, Juan
  • Penadés, Jose
  • Migallón, Violeta|||/items/19db1ff4-dc48-424b-b2ea-0522ff049c8a
  • Penadés, Jose|||/items/2f533297-8ae6-4b05-9fb6-1bb85696f056
The PageRank algorithm for determining the importance of Web pages has become a central technique in Web search. This algorithm uses the Power method to compute successive iterates that converge to the principal eigenvector of the Markov chain representing the Web link graph. In this work we present an effective heuristic Relaxed and Extrapolated algorithm based on the Power method that accelerates its convergence. A hybrid parallel implementation of this algorithm has been designed by combining various OpenMP threads for each MPI process and several strategies of data distribution among nodes have been analyzed. The results show that the proposed algorithm can significantly speed up the convergence time with respect to the parallel Power algorithm.