Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modelling canopy fuel and forest stand variables and characterizing the influence of thinning in the stand structure using airborne LiDAR, Estimación de variables de combustible de copa y de masa, caracterizando el efecto de las claras en su estructura usando LiDAR aerotransportado

  • Hevia, A.
  • Álvarez-González, J. G.
  • Ruiz-Fernández, E.
  • Prendes, C.
  • Ruiz-González, A. D.
  • Majada, J.
  • González-Ferreiro, E.
[EN] Forest fires are a major threat in NW Spain. The importance and frequency of these events in the area suggests the need for fuel management programs to reduce the spread and severity of forest fires. Thinning treatments can contribute for fire risk reduction, because they cut off the horizontal continuity of forest fuels. Besides, it is necessary to conduct a fire risk management based on the knowledge of fuel allocation, since fire behaviour and fire spread study is dependent on the spatial factor. Therefore, mapping fuel for different silvicultural scenarios is essential. Modelling forest variables and forest structure parameters from LiDAR technology is the starting point for developing spatially explicit maps. This is essential in the generation of fuel maps since field measurements of canopy fuel variables is not feasible. In the present study, we evaluated the potential of LiDAR technology to estimate canopy fuel variables and other stand variables, as well as to identify structural differences between silvicultural managed and unmanaged P. pinaster Ait. stands. Independent variables (LiDAR metrics) of greater explanatory significance were identified and regression analyses indicated strong relationships between those and field-derived variables (R2 varied between 0.86 and 0.97). Significant differences were found in some LiDAR metrics when compared thinned and unthinned stands. Results showed that LiDAR technology allows to model canopy fuel and stand variables with high precision in this species, and provides useful information for identifying areas with and without silvicultural management., [ES] Los incendios forestales suponen una gran amenaza en el NO de España. La importancia y frecuencia de estos eventos en la zona sugiere la necesidad de programas de gestión del combustible para reducir la propagación y severidad de los incendios. La realización de una selvicultura de claras puede contribuir a la reducción del riesgo de incendio, ya que ocasiona una ruptura de la continuidad horizontal del combustible forestal. Además, es necesario realizar una gestión del riesgo de incendio basada en el conocimiento de la localización del combustible sobre el terreno, puesto que el estudio del comportamiento de un incendio y la simulación de la propagación del fuego son dependientes del factor espacial. Por ello, resulta esencial la generación de mapas del combustible para diferentes escenarios selvícolas. La elaboración de modelos de estimación de variables dasométricas y de estructura de la masa a partir de tecnología LiDAR es el punto de inicio para la elaboración de una cartografía espacialmente explícita. Esto adquiere mayor valor en los mapas de combustible puesto que la medición de las variables en campo resulta inviable. En el presente estudio, evaluamos el potencial de la tecnología LiDAR para estimar variables del combustible de copa y otras variables de masa, así como para identificar diferencias estructurales a nivel de rodal en masas de Pinus pinasterAit. con y sin manejo selvícola. Las variables independientes (métricas LiDAR) de mayor importancia explicativa fueron identificadas y los análisis de regresión indicaron fuertes relaciones entre éstas y las variables medidas en campo (R2 varió entre 0.86 y 0.97). Por otra parte, se observaron diferencias significativas en algunas métricas LiDAR cuando se compararon masas aclaradas y no aclaradas. Los resultados demostraron que la tecnología LiDAR permite la modelización de variables de masa y de combustible de copa con alta precisión en esta especie, y que proporciona información útil para la identificación de áreas con y sin gestión selvícola, We thank the funding of: i) FORRISK project (Interreg IVB SUDOE 2007-2013), ii) Forest Services of the Government of the Principality of Asturias, and iii) Galician Government and European Social Fund (Official Journal of Galicia – DOG nº 52, 17/03/2014 p. 11343, exp: POS-A/2013/049). We also thank the staff from SERIDA and CETEMAS who participated in the fieldwork. Finally, we also acknowledge the comments of the Reviewers and Editor that have contributed to enhance this study
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Biomass assessment and carbon sequestration in post-fire shrublands by means of Sentinel-2 and Gaussian processes

  • Vinué-Visús, David
  • Ruiz-Peinado, Ricardo
  • Fuente-Herraiz, David|||0000-0003-4141-7948
  • Oliver Villanueva, José Vicente|||0000-0003-2842-7834
  • Coll-Aliaga, Eloína|||0000-0001-8938-9216
  • LERMA ARCE, VICTORIA|||0000-0002-0433-7204
[EN] In this contribution, we assessed the biomass and carbon stock of a post-fire area covered by a young oak coppice of Quercus pyrenaica Willd. associated with shrubs, mainly of Cistus laurifolius L. This area was burned during the fire event of Chequilla (Guadalajara, Spain) in 2012. Sentinel-2 imagery was used together with our own forest inventories in 2020 and machine learning methods to assess the total biomass of the area. The inventory includes plots of total dry weight ranging between 6 and 14 Mg·ha¿1 with individuals up to 8 years old. Nonlinear, nonparametric Gaussian process regression methods were applied to link reflectance values from Sentinel-2 imagery with total shrub biomass. With a reduced inventory of only 32 plots covering 136 ha, the total biomass could be assessed with a root-mean-square error of 1.36 Mg·ha¿1 and a bias of ¿0.04 Mg·ha¿1, getting a relative error between 9.8% and 20.4% for the gathered biomass. This is a rather good estimation considering the little effort and time invested; thus, the suggested methodology is very suitable for forest monitoring and management., This research was funded by the Interreg SUDOE Program through the European Regional Development Fund (ERDF): Interreg SUDOE REMAS project (SOE3/P4/E0954) "Greenhouse gas emissions risk management in forest fires" (2019-2022).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Conscious architecture and circular economy for a transition in building: The IMIP project as a case study

  • Gilabert-Sanz, Salvador
  • Oliver Villanueva, José Vicente|||0000-0003-2842-7834
[EN] This research explores the role of design in fostering sustainable transitions through systemic thinking in the building sector, addressing the dynamic, multi-scalar, multi-species, and transdisciplinary challenges inherent in socio-ecological and socio-technical transformations. The study is grounded in Transition Design principles, recognizing the agency of ecological, human, and computational intelligence. By embracing systemic approaches, this paper underscores the importance of long-term thinking, collective action, pluralistic perspectives, and value co-creation among diverse actors. The results highlight the IMIP (Innovative Eco-Construction System Based on Interlocking Modular Insulation Wood & Cork-Based Panels) project s contribution to circular economy principles, demonstrating its environmental and social impact through a comprehensive Life Cycle Assessment (LCA), as an innovative holistic approach to low-energy construction and near-zero-emissions strategies in construction, leveraging local timber and cork as materials for construction systems in building. These results demonstrate the potential of locally based bio-based materials and modular construction systems to promote circularity, reduce ecological footprints, and enhance community resilience. The findings reinforce the significance of design as a driver of systemic change in the building sector, emphasizing the interdependencies and feedback loops between human actions, natural ecosystems, and technological infrastructures., European Interreg Sudoe Program 2021-2024
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Interlocking Modular Insulation Panels Manufactured with Mediterranean Pinewood and Cork

  • Brunet-Navarro, Pau
  • Gilabert Sanz, Salvador
  • Monleón Doménech, Melchor
  • Hermoso, Eva
  • Sánchez-González, Mariola
  • Luengo, Emilio
  • Mandrara, Zaratiana
  • Gominho, Jorge
  • Redón-Santafé, Miguel|||0000-0002-4581-1590
  • Oliver Villanueva, José Vicente|||0000-0003-2842-7834
[EN] Economic profitability of harvested softwood in Southwestern Europe is limited for low quality logs. Some social and environmental consequences of low incomes of rural activities are rural depopulation and accumulation of biomass in unmanaged forests. The energy efficiency of buildings could be improved as construction material employing local bioresources that are currently used to manufacture products of low added value. Here, the IMIP project (Innovative Eco-Construction System Based on Interlocking Modular Insulation Wood & Cork-Based Panels) aimed to support the change towards a low carbon economy using bioproducts (pinewood and cork) for smart, sustainable, and inclusive growth with a special focus on the public construction sector is presented. The main objective of the IMIP project is to design, validate and implement an innovative ecological construction system based on natural biological materials to improve energy efficiency in public buildings from the construction, use and demolition phases. The project also develops a tool to professionals from the construction sector (architects and engineers) and researchers to assess the carbon footprint of buildings. The products of the project have the ambition to improve the economic, social and environmental situation of rural areas of Southwestern Europe., This research was funded by the Interreg SUDOE program as part of the European Regional Development Found (ERDF), grant number SOE3/P3/E0963.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of electrical signals in pine trees in a mediterranean forest ecosystem

  • Zapata, Rodolfo
  • Luzuriaga, Jorge E.
  • Oliver Villanueva, José Vicente|||0000-0003-2842-7834
  • Lemus Zúñiga, Lenin Guillermo|||0000-0002-6361-6019
  • Mateo Pla, Miguel Ángel|||0000-0002-8059-6996
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
[EN] Electric potential differences in living plants are explained by theories based on sap flow. In order to acquire more advanced knowledge about the spatial distribution of these electric potential measures in trees, this research aims to analyze electrical signals in a population of Aleppo pines (Pinus halepensisMill.) in a representative Mediterranean forest ecosystem. The specific research objective is to assess some of the most significant factors that influence the distribution pattern of those electric signals: tree age, measurement type and electrode placement. The research has been conducted in representative forest stands, obtaining measurements of different representative trees. After a statistical evaluation of the obtained results, the main conclusions of our research are: A.Tree maturity influences directly on electric potential. B.Maximum electrical signals can be measured in young pines showing values of 0.6 V and 0.6 mu A for voltage and current, respectively. C.The distribution patterns of both voltage and short-circuit current depending on electrode placement are uniform.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of a Model to Estimate the Risk of Emission of Greenhouse Gases from Forest Fires

  • LERMA ARCE, VICTORIA|||0000-0002-0433-7204
  • Yagüe-Hurtado, Celia|||0000-0002-7904-1686
  • Van Den Berg-Sesma, Helena Carmen
  • Oliver Villanueva, José Vicente|||0000-0003-2842-7834
  • Lorenzo-Sáez, Edgar|||0000-0003-3766-1198
  • García-Folgado, Miguel
  • Benhalima, Yacine
  • Marqués-Duarte, Inês
  • Acaçio, Vanda
  • Rego, Francisco C.
  • López-Senespleda, Eduardo
  • Menéndez-Miguélez, María
  • Ruiz-Peinado, Ricardo
  • Petillon, Thomas
  • Jalabert, Stephanie
  • Carbó-Valverde, Ester
  • Gimeno-García, Eugenia
  • Aleix-Amurrio, Rebeca
[EN] While the Mediterranean basin is foreseen to be highly affected by climate change (CC) and severe forest fires are expected to be more frequent, international efforts to fight against CC do not consider forest fires¿ greenhouse gas (GHG) emissions risk and the possibility of its mitigation. This is partly due to a lack of a methodology for GHG risk spatial assessment and consideration of the high value of carbon stocks in forest ecosystems and their intrinsic risk. To revert this, an innovative GHG emission risk model has been developed and implemented in a pilot forest area. This model considers geospatial variables to build up emission vulnerability based on potential fire severity and resistance of a landscape, value at risk and the hazard of a fire occurrence. The results classify low, moderate and high emission risks in the analysed areas. This identification of hotspots allows the prioritisation of fire prevention measures in a region to maximise the reduction of GHG emissions in the case of a fire event. This constitutes the first step in a holistic and consistent CC mitigation that not only considers anthropic GHG sources but also possible GHG emissions by forest fires that can be actively prevented, managed and reduced., This research was financed by the REMAS project (co-financed by the Interreg Sudoe Programme through the European Regional Development Fund (ERDF), grant number "SOE3/P4/E0954".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Potential Analysis of Mediterranean Forestry for Offsetting GHG Emissions at Regional Level: Evidence from Valencia, Spain

  • Lorenzo-Sáez, Edgar|||0000-0003-3766-1198
  • Oliver Villanueva, José Vicente|||0000-0003-2842-7834
  • LERMA ARCE, VICTORIA|||0000-0002-0433-7204
  • Yagüe-Hurtado, Celia|||0000-0002-7904-1686
  • Lemus Zúñiga, Lenin Guillermo|||0000-0002-6361-6019
[EN] Forest management is an untapped tool, yet to realize its full potential to fight against climate change. The capability of forests to act as carbon sinks makes them a key resource to reduce CO2 concentration in the atmosphere. However, carbon which has been fixed can be suddenly emitted again as a consequence of disturbances such as pests or wildfires. Mediterranean plant phenology, climatic conditions, and the accumulation of fuel biomass due to abandonment of traditional forest uses generate a scenario prone to large wildfires and consequently large greenhouse gases (GHG) emissions. The abandonment could be offset by considering the economic value of forest ecosystem services, principally carbon fixation. Nevertheless, currently existing forest carbon markets consider only anthropogenic fixation based on a business as usual scenario without disturbances that cannot be applied to Mediterranean forest reality. Thus, a methodology to monetize carbon fixed has been developed and applied. A range between 55.5 and 250 million euro produced by the monetization of 16.5 million potential carbon credits has been obtained based on anthropogenic avoided emissions produced over a 10 year-period. Thereby, the potential for offsetting emissions of the pilot region was between 1.2% and 5.6% of total diffuse GHG emissions. Consequently, sustainable forest management represents an important opportunity to combat climate change, taking advantage of the margin of improvement that the Mediterranean forests currently have to avoid GHG emissions through forest fire prevention silviculture., This research was funded by EIT Climate KIC in the frame of the ValVolCar project and by Interreg SUDOE REMAS project (SOE3/P4/E0954), project co-financed by the Interreg Sudoe Program through the European Regional Development Fund (ERDF).
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

IoT Cloud-Based Power Quality Extended Functionality for Grid-Interactive Appliance Controllers

  • Garrido Zafra, Joaquín
  • Gil de Castro, Aurora
  • Savariego Fernández, Rafael
  • Liñán, Matías
  • García Torres, Félix
  • Moreno-Muñoz, A.
Due to the myriad of loads that are collected into commercial grid-interactive efficient buildings (GEBs) focused on the industry 4.0 paradigm, it is important to ensure their proper electrical operation. The power quality (PQ) here requires a granular monitoring approach, reaching a point where each device connected to the microgrid can diagnose whether its power supply is optimal. Otherwise, it can participate cooperatively in decision-making to avoid anomalies or faults in the microgrid. In this work, we present cloud-based extended functionality to make smart appliances responsive to the grid, either autonomously or managed under the open automated demand response standard. Further to acting as a switch, the main strength lies in its PQ monitoring via the FIWARE Internet of Things (IoT) platform with data-driven analytics capabilities. It identifies and even predicts a broad spectrum of electrical disturbances, far exceeding the capabilities of previous solutions such as the grid-friendly appliance controller, so it is possible to customize a battery of alarms at will (e.g., according to IEEE 1547 standard). Moreover, although it can act autonomously, its main mission will be to act in a coordinated manner, either cooperatively or under the supervision of the GEB Energy Management System. Finally, different case studies are presented to show their capabilities. With the integration of these distributed submetering systems, under standards IoT wireless communication protocols, a further step will be taken in the advent of the digital utility paradigm.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One catastrophic flood every millennium: synchronicity of extreme floods and global warm periods in the multi-archive record of the Roman theatre of Guadix (Granada, SE Spain)

  • Díez Herrero, Andrés
  • Mateos Ruiz, Rosa María
  • Vázquez Tarrío, Daniel
  • López Marcos, Antonio
  • Brao González, F.J.
[EN] Past global changes are typically registered in both natural (e.g., geologic-geomorphological, atmospheric-climatic, hydrologic-glacial and biological) and cultural records (e.g., archaeological, historical and documentary sources). Nevertheless, there are few sites in the world where sedimentary and archaeological evidence combine to provide information about two or more past millennial climate changes. In this regard, the Roman city of Guadix (Granada, SE Spain) represents a singular location, whose Roman theatre (1st century CE), recently discovered in 2007, contains palaeo-flood evidences that can be related to the two latest global warm periods: the Roman and Medieval epochs. In this research, detailed geological analyses are carried out. These analyses consisted in careful descriptions of vertical stratigraphic sections (lithology, structures…) and lateral correlation panels; as well as fluvial facies models to interpret the sedimentary environments for each sequence. This sedimentological information was combined with the study of archaeological remains, radiocarbon dating and optically stimulated luminescence, and three major flood events have been identified: two of them dating back to the beginning of the 1st century CE (period of the Pax Romana Empire); and the other occurring at the end of the 12th century (Islamic Almohad period). Such extreme hydrological events were synchronous with two warm periods: the Roman Climatic Optimum and the Medieval Warm Period. This seems to suggest that the meteorological fluctuations associated to climate changes during warming periods (such as the current one associated with present-day climate change) very likely produce such extraordinary or extreme events, which can mobilise large amounts of solid load (sands, silts and clays) and trigger sudden changes in the configuration of the river system (channel avulsions, meander cut-offs and captures among tributaries) and alluvial fans (at tributary mouths). We believe that the documented observations provide an analogy for the current warming period. In this regard, flood risk management in the current city of Guadix, whose hazard and risk maps were drawn up according to the criteria of the European Flood Directive, should take into account: (i) the millennial recurrent character of catastrophic floods in Guadix, well above the 500-year return period officially considered; (ii) the importance of the mobilisation of solid load in flood hazard and risk, which can obstruct drains and reduce the capacity of channels and bridges; (iii) the geomorphological dynamics, capable of modifying the position of the channels and thus the delimitation of hazard and risk zones; (iv) the role of non-permanent tributaries of the Guadix River during storms and heavy rain, related to quasi-stationary convective cells. Only in this way, will flood hazard and risk maps be useful in territorial and urban planning, civil protection during emergencies and the reduction of damage from future catastrophic floods. The present study highlights how geoarchaeological and palaeo-environmental records can be a highly valuable source of data for the improvement of flood hazard assessments in the 21st Century., This work has been developed in the framework of the RISKCOAST Project: “Development of tools to prevent and manage geological risks on the coast linked to climate change” (Ref: SOE3/P4/E0868), funded by the Interreg SUDOE programme. This paleohydrological research is also part of the 2022-2023 grant signed between the Spanish Directorate General for Water (DGA-MITERD) and the Spanish National Research Council (CSIC-MCIN), which includes action 20223TE003 (IGME-CSIC Tarquín Project), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Crisis exercise in the framework of coastal geohazards: Experience in the Balearic islands (Spain)

  • Gasc-Barbier, Muriel
  • Mateos Ruiz, Rosa María
  • Iasio, Christian
  • Chanal, Anne
  • Villatte, Arnaud
  • Bernardie, Séverine
  • Reyes-Carmona, Cristina
  • Sarro Trigueros, Roberto
  • Martínez Corbella, Mónica
  • Luque Espinar, Juan Antonio
  • López-Vinielles, Juan
  • Monserrat, Oriol
[EN] Within an international cooperation network (France, Spain and Portugal) involving researchers, first responders and civil protection authorities, a crisis exercise was held simultaneously in Mallorca and Ibiza (Balearic Islands, Spain). The objectives were to test crisis management procedures defined by operational actors, integrating new developed scientific tools related to landslides and rockfalls, as well as the internal relationship with the new created Technical Advisory Committee. The initiative included a training module for all stakeholders before the exercise explaining the scientific tools used for supporting the decision-making process during the exercise, as well as a field trip in the Tramuntana range in Mallorca to gain first-hand knowledge of the geological hazards threatening the region, mainly rockfalls. More than 70 people were involved in the training exercise, including researchers, civil protection, civil guard, municipalities, representants of the autonomous regions, local and regional crisis management managers from different French and Spanish entities, etc. At the end of the exercise, a joint analysis was made of the strengths and weaknesses found during the development of the exercise and propositions of improvements were made. Local and regional authorities concluded that, thanks to the exercise, they are better prepared to deal with georisks induced by extreme weather, mainly landslides and rockfalls. The scientific community understood the type of operational products they should develop for decision support during disaster risk crises. This experience emphasizes the need to create stronger links between the scientific community and civil protection stakeholders., This work was supported by the European Regional Development Fund (ERDF) through the project “RISKCOAST” (SOE3/P4/E0868) of the Interreg SUDOE Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Seasonal rockfall risk analysis in a touristic island: Application to the Tramuntana Range (Mallorca, Spain)

  • Santos, Pedro Pinto
  • Reyes-Carmona, Cristina
  • Pereira, Susana da Silva
  • Sarro Trigueros, Roberto
  • Martínez Corbella, Mónica
  • Coll Ramis, Miquel Àngel
  • Zêzere, José Luís
  • Mateos Ruiz, Rosa María
[EN] Rockfalls are an ever-present possibility in the mountainous context of the Tramuntana Region (Mallorca, Spain). Recent events have shown the high potential for direct and indirect impact on the safety of people and economic activities, lasting for weeks or even months. In the present study, we start from a probabilistic assessment of the rockfall hazard (spatial propensity and temporal recurrence), based on a detailed historical record of occurrences and rockfall modelling, which is subsequently superimposed on three exposure scenarios and on a social vulnerability assessment. Exposure considers the floating population at three seasons of the year, given the area's high tourist aptitude. Vulnerability considers on the one hand the intrinsic characteristics of individuals and, on the other, the characteristics of the surrounding territory that act to facilitate emergency operations, mitigate the immediate impact and enhance rapid recovery. Due to the characteristics of the island and the spatial distribution of tourism, the results show that the highest density of rockfall trajectories potentially affect areas of high exposure, whose access by emergency services is complex. Not being, in general, the areas of highest individual criticality, those areas have in most situations low support capability installed or nearby. The results constitute a useful tool for emergency and risk management planning in multiple sectors linked to risk governance. Despite the high geographic detail of the analysis, these studies do not replace exposure and vulnerability analysis at the building level, for which the contribution of georeferenced Census data is fundamental., This work was supported by the European Regional Development Fund (ERDF) through the project "RISKCOAST” (SOE3/P4/E0868) of the Interreg SUDOE Programme, and by Associate Laboratory TERRA funding (LA/P/0092/2020). The work of Cristina Reyes-Carmona was partially funded by the Dragon 5-project ID 59339 (Ref: 4000138450/22/I-NB)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Potential socio-economic impacts of ground movements in the coastal municipalities of Spain: Insights from the supra-regional implementation of the European Ground Motion Service

  • López-Vinielles, Juan
  • Ezquerro Martín, Pablo
  • Béjar Pizarro, Marta
  • Sarro Trigueros, Roberto
  • Cuevas-González, María
  • Barra, Anna
  • Mateos Ruiz, Rosa María
[EN] This study assesses the vulnerability of the Spanish coastline—a major global tourism destination—to ground movements, providing for the first time initial estimates of the potential socio-economic impact of this phenomenon in this highly strategic territory. Using Interferometric Synthetic Aperture Radar (InSAR) data from the European Ground Motion Service (EGMS), an InSAR-based service developed under the Copernicus initiative, we evaluated the coastline's exposure to natural and human-induced ground movements, and their potential impacts on the road network, buildings, and population. Utilizing a suite of post-processing tools including ADAfinder, we identified a series of Active Deformation Areas (ADAs) and classified them based on their prevailing movement (vertical or horizontal) and displacement rate. As a result, a dataset consisting of 9010 ADAs spread across Spain's 805 coastal municipalities was generated, with 1916 ADAs affecting roadways and 2596 affecting buildings. Most ADAs exhibited predominant vertical movement, primarily associated with land subsidence, although ADAs exhibiting horizontal movement, mainly linked to landslides, were also significant. The majority of ADAs showed moderate to low displacement rates (<25 mm/yr). We calculated a potential economic impact (in 2021€ values) of €19,428.4 million, with €1716.4 million attributed to the road network and €17,712.0 million to buildings. Additionally, we identified a total of 134,236 people potentially vulnerable to these processes. Results highlight both a higher exposure of Spain's Mediterranean coast compared to the Atlantic coast and a higher exposure of the Canary archipelago compared to the Balearic Islands—with the most vulnerable regions being Andalusia and Region of Murcia. This research underscores the potential of the EGMS for conducting both preliminary population exposure analyses and preventive risk assessments to mitigate road and building damage., This work has been funded by the “Plan de Recuperación, Transformación y Resiliencia - Financiado por la Unión Europea – NextGenerationEU” programme in the framework of the “Estudio integral de los Riesgos Geológicos ligados al Cambio Climático en España (Ref. 38980)” contract and the “C17.i7.CSIC – CLI 2021-00-000: Cambio climático e impacto en las reservas de agua, los riesgos geológicos y el patrimonio natural” project. In addition, it has been partially funded by: the “RISKCOAST” project (Ref. SOE3/P4/E0868), funded by the IV INTERREG SUDOE program; the “EGMS RASTOOL: European ground motion risk assessment tool” project (Grant Agreement No. 101048474), funded by the Directorate-General for European Civil Protection and Humanitarian Aid Operations; and the Spanish Grant SARAI (PID2020-116540RB-C21), funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Soil Management Effects on Grapevine Water Uptake Depth in a Mediterranean Vineyard

  • Ruiz, Itxaso
  • Schwendenmann, Luitgard
  • Barbeta, Adrià
  • Lehmann, Marco M.
  • Parmo, Roberto
  • Aizpurua, Ana
In Mediterranean vineyards, soils are often managed with tillage or herbicides to limit weed growth and competition for resources. However, with rising concerns about water scarcity and climate change, cover crops are being reconsidered as sustainable alternatives to conserve soil moisture and support adaptation through better soil structure and biodiversity. Although they are often reported to decrease yields, this is not always the case, and the magnitude and timing of their competition for resources with vines are still not well understood. To address this gap, we examined vine and cover crop water uptake depth during veraison in August in a vineyard from Rioja Alavesa, Spain. We compared tillage (control treatment) with spontaneous cover crop. Using the isotopic composition of plant and soil water (δ18O and δ2H) and Bayesian mixing models, we found that the cover crop relied on water from the upper soil (100% from 0 to 30 cm), while vines under cover crop accessed water from shallow (~48% from 0 to 30 cm) and deeper soil layers (~52% from 30 to 100 cm). Despite cover crops and vines competing for water in the upper soil, the vine's ability to access water from both shallow and deeper soil horizons helped maintain its water status during veraison. Vines under tillage relied predominantly on water in the deeper soil (~73% from 30 to 100 cm). These results indicate that soil management strongly influences vine water uptake patterns. In our vineyard, the spontaneous summer cover crop did not compromise vine water availability during veraison., We would like to thank winegrowers Eva and Luis, from Maisulan Vineyard, for their valuable collaboration and commitment to sustainable management. The authors acknowledge the INTERREG Sudoe MONTCLIMA, VITISAD, and VITISAD 2 Projects for providing the field trial on which this study is based. This work was carried out within the framework of the IsWINE Project (no. 101152621), funded by the Marie Skłodowska-Curie Actions (HORIZON-MSCA-2023-PF-01) under the Horizon Europe programme. We also acknowledge Matthias Saurer and Manuela Oettli at WSL Birmensdorf for technical assistance with isotope measurements, and Neiker for providing laboratory facilities and technical support. M.M.L. was supported by the Swiss National Science Foundation (#213367, #229377). Open access publishing facilitated by The University of Auckland, as part of the Wiley - The University of Auckland agreement via the Council of Australasian University Librarians., info:eu-repo/semantics/publishedVersion
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Domestic clustered networks and internationalization of agrifood SMEs

  • Serrano, Raul|||0000-0003-2911-8937
  • Dejo Orícain, Natalia|||0000-0002-7424-6252
  • Ferrer Lorenzo, Juan Ramón|||0000-0003-1902-1613
  • Pinilla, Vicente
  • Abella Garcés, Silvia
  • Maza Rubio, María Teresa|||0000-0002-2266-4655
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Sustainability determinants in the Iberian wine industry

  • García Cortijo, Maria Carmen
  • Ferrer Lorenzo, Juan Ramón|||0000-0003-1902-1613
  • Castillo Valero, Juan Sebastián
  • Gonçalves, Tania
  • Marta Costa, Ana
  • Pinilla, Vicente
  • Rebelo, Joao
  • Serrano, Raul
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Relative intensity noise transfer reduction in raman-assisted BOTDA systems

  • Angulo Vinuesa, Xabier
  • Bacquet, D.
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Szriftgiser, P.
  • González Herráez, Miguel|||0000-0003-2555-2971
Raman-assistance (RA) has been identified as a promising technique to extend the measurement range of Brillouin optical time-domain analysis (BOTDA)-based distributed sensors. Unfortunately, Raman amplification introduces a great amount of relative intensity noise (RIN) to the detected low-frequency probe wave. This RIN transfer problem has been widely identified as a major limitation in RA-BOTDA. In vector BOTDA (VBOTDA), the detected signal is transferred to a high-frequency carrier where the Raman RIN transfer turns out to be much less harmful. In addition, a VBOTDA can also provide information about the phase-shift induced by the local stimulated Brillouin scattering gain curve, paving the way for dynamic measurements. In this letter, we demonstrate, for the first time to our knowledge, the RA in a VBOTDA obtaining gain and phase measurements. Our results show a significant reduction of the RIN transfer effect in RA-VBOTDA compared with standard RA-BOTDA, making this type of scheme particularly interesting for long-range and dynamic distributed sensing., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Modulation instability-induced fading in phase-sensitive optical time-domain reflectometry

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Salgado, P.
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
Phase-sensitive optical time-domain reflectometry (φOTDR) is a simple and effective tool allowing the distributed monitoring of vibrations along single-mode fibers. We show in this Letter that modulation instability (MI) can induce a position-dependent signal fading in long-range φOTDR over conventional optical fibers. This fading leads to a complete masking of the interference signal recorded at certain positions and therefore to a sensitivity loss at these positions. We illustrate this effect both theoretically and experimentally. While this effect is detrimental in the context of distributed vibration analysis using φOTDR, we also believe that the technique provides a clear and insightful way to evidence the Fermi-Pasta-Ulam recurrence associated with the MI process., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Modulation instability-induced visibility fading in phase-sensitive OTDR

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Salgado, P.
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
Phase-sensitive optical time domain reflectometry (ΦOTDR) is a simple and effective tool that allows the distributed monitoring of vibrations along single-mode fibers. In this letter we study the effects of modulation instability (MI) in long-range ΦOTDR over conventional optical fibers. We demonstrate both theoretically and experimentally that MI can induce a position-dependent signal fading which leads to a nearly complete visibility loss in the interference signal recorded at certain positions and therefore to a sensitivity loss at these positions. While this effect is detrimental in the context of distributed vibration analysis using ΦOTDR, we also believe that the technique provides a clear and insightful way to evidence the Fermi-Pasta-Ulam (FPU) recurrence associated to the MI process., Ministerio de Economía y Competitividad, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Simple Method for the Elimination of Polarization Noise in BOTDA Using Balanced Detection and Orthogonal Probe Sidebands

  • López Gil, Alexia Inés
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Polarization noise arises in Brillouin optical timedomain analysis due to the strong polarization sensitivity of stimulated Brillouin scattering. To avoid this noise, it turns out to be indispensable to perform some kind of polarization scrambling, either in the pump pulse, the probe signal or both. This is usually achieved using polarization scrambling/switching systems, which, being mechanical, tend to be not as robust as it would be desirable. In this paper, we propose a completely passive system,with no moving parts, to eliminate polarization noise in a BOTDA. It is based on the use of passive depolarization of the pump pulse together with balanced detection among orthogonally polarized Stokes and anti-Stokes bands of the probe signal. The setup requires no alignment readjustment over time and provides a performance similar to a conventional BOTDA using scrambler., Ministerio de Economía y Competitividad, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Signal-to-Noise Ratio Improvement in BOTDA Using Balanced Detection

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • López Gil, Alexia Inés
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Brillouin optical time domain analysis (BOTDA) relies typically on the interaction among two counter-propagating waves: 1) a pulsed pump wave and 2) a modulated probe wave. The modulated probe wave has typically two sidebands, located at ±νB with respect to the pump frequency. Conventional systems detect the time-resolved gain/loss by detecting only the upper/lower wavelength sideband. In this letter, we show that BOTDA can strongly benefit from the use of balanced detection among the two sidebands. In particular, the detected signal can be doubled while the noise only grows by a factor of (2)1/2, leading to a (2)1/2 signal-to noise ratio (SNR) increase. Moreover, any common-mode noise in the probe signal path (e.g., master laser noise, modulator drifts, and so forth) is eliminated, rendering the system more robust. We validate the principle by experimental results that highlight the benefits of the technique in terms of the SNR., Comunidad de Madrid, Ministerio de Ciencia e Innovación, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Raman-assisted Vector Brillouin Optical Time Domain Analysis

  • Angulo Vinuesa, Xabier
  • Bacquet, D.
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Szriftgiser, P.
  • González Herráez, Miguel|||0000-0003-2555-2971
Raman-assistance (RA) has become a promising technique to enhance the sensing range of standard Brillouin Optical Time Domain Analysis (BOTDA) fiber sensors due to its ability to amplify in a distributed way all the interacting signals within the fiber. Unfortunately, Raman amplification introduces a great amount of Relative Intensity Noise (RIN) to the detected low-frequency probe wave. This RIN transfer problem has been widely identified as a major limitation in RABOTDA. In Vector Brillouin Optical Time Domain Analysis (VBOTDA) the detected signal is transferred to a highfrequency carrier where the Raman RIN transfer turns out to be much less harmful. In this work we demonstrate, for the first time to our knowledge, Raman-assistance in a VBOTDA. Our results show significant reduction of the RIN transfer effect in RA-VBOTDA compared to standard RA-BOTDA, making this type of scheme particularly interesting for long range distributed sensing., European Commission, Ministerio de Economía y Competividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Compound lasing fiber optic ring resonators for sensing

  • Rota Rodrigo, Sergio
  • González Herráez, Miguel|||0000-0003-2555-2971
  • López Amo, M.
In this work, we present a new method for increasing simultaneously the sensitivity and interrogation stability of fiberoptic intensity sensors. The configuration is based on a double-coupler ring resonator. On one side, the attenuation sensitivity of the sensor is enhanced by placing it inside a ring resonator. On the other side, the stability of the interrogation method is rendered close to perfect by creating an external lasing ring resonator with matched spectral response. The resulting lasers allow the stable interrogation of the sensors with an impressive sensitivity enhancement. In our experiments, the dynamic range of the intensity sensor (and consequently its sensitivity) is increased 15 dB by using this laser-based interrogation system. Simultaneously, the instability of the system is reduced to ±0.05 dB. In comparison with systems based on external interrogation, our method is <100 times more stable and also simpler, as no wavelength tunable elements are required., Ministerio de Ciencia e Innovación, Ministerio de Economía y Competitividad, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Exploiting nonreciprocity in BOTDA systems

  • López Gil, Alexia Inés
  • Angulo Vinuesa, Xabier
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
In this Letter, we present and demonstrate a novel technique for distributed measurements in Brillouin optical time-domain analysis based on the use of the nonlinear phase-shift induced by stimulated Brillouin scattering. Employing a Sagnac interferometer (SI), the position-resolved Brillouin phase-shift spectrum (BPS) along the fiber can be obtained, benefiting from the sensitivity to nonreciprocal phase-shifts of the SI scheme. This proposal simplifies the existing methods to retrieve the BPS distribution along an optical fiber since phase modulation, filtering, and high-bandwidth detectors are not required. The fundamentals of the technique are described theoretically and validated through numerical simulations and experimental measurements., European Commission, Ministerio de Economía y Competitivdad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Distributed phase birefringence measurements based on polarization correlation in phase-sensitive optical time-domain reflectometers

  • Soto Hernández, Marcelo Alfonso
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Thévenaz, Luc
In this paper a technique to measure the distributed birefringence profile along optical fibers is proposed and experimentally validated. The method is based on the spectral correlation between two sets of orthogonally-polarized measurements acquired using a phase-sensitive optical time-domain reflectometer (φOTDR). The correlation between the two measured spectra gives a resonance (correlation) peak at a frequency detuning that is proportional to the local refractive index difference between the two orthogonal polarization axes of the fiber. In this way the method enables local phase birefringence measurements at any position along optical fibers, so that any longitudinal fluctuation can be precisely evaluated with metric spatial resolution. The method has been experimentally validated by measuring fibers with low and high birefringence, such as standard single-mode fibers as well as conventional polarizationmaintaining fibers. The technique has potential applications in the characterization of optical fibers for telecommunications as well as in distributed optical fiber sensing., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Limits of BOTDA Range Extension Techniques

  • Angulo Vinuesa, Xabier
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • López Gil, Alexia Inés
  • Ania Castañón, Juan Diego
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Brillouin-based temperature and strain sensors have attracted great attention of both the academic and industrial sectors in the past few decades due to their ability to perform distributed measurements. Particularly, Brillouin Optical Time Domain Analysis (BOTDA) systems have been applied in many different scenarios, proving particularly useful in those requiring especially wide coverage ranging extremely long distances, such as in civil structure monitoring, energy transportation or environmental applications. The extension of the measuring range in these sensors has therefore become one of the main areas of research and development around BOTDA. To do so, it is necessary to increase the Signal to Noise Ratio (SNR) of the retrieved signal. So far, several techniques have been applied in order to achieve this goal, such as pre-amplification before detection, pulse coding or Raman amplification. Here, we analyze these techniques in terms of their performance limits and provide guidelines that can assist in finding out which is the best configuration to break current range limitations. Our analysis is based on physical arguments as well as current literature results., European Commission, Ministerio de Economía y Competitividad, Universidad de Alcalá, Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Strong Cancellation of RIN Transfer in a Raman-Assisted BOTDA Using Balanced Detection

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • López Gil, Alexia Inés
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Raman assistance is one of the most interesting routes toward extending the range of Brillouin optical timedomain analysis (BOTDA) systems. Unfortunately, the use of Raman amplification normally entails an important relative intensity noise (RIN) transfer toward the probe wave, which severely limits this approach. In this letter, we show that the RIN transfer problem can be effectively avoided using a slightly modified scheme comprising a dual-sideband modulated probe and balanced detection. Our measurements clearly indicate a nearly complete cancellation of the RIN noise in the detected trace signal. The use of balanced detection in our Raman-assisted BOTDA setup implies a fivefold increase in figure of merit compared with the same setup using conventional detection., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Distributed vibration sensing over 125 km with enhanced SNR using ΦOTDR over a URFL cavity

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Ania Castañón, Juan Diego
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
We describe the use of a phase-sensitive optical time domain reflectometer (ΦOTDR) over an ultra-long Raman fiber laser cavity allowing fully distributed detection of vibrations over 125 km. Compared to a first-order Raman-assisted ΦOTDR, this scheme shows an enhanced signal-to-noise ratio (SNR). This is due to the fact that the relative intensity noise introduced by the Raman amplification is mostly transferred to a lower frequency range, where the balanced detection implemented in the setup provides better suppression of the common-mode noise. The sensor was able to measure vibrations of up to 380 Hz (limit set by the time of flight of light pulses) in a distance of 125 km with a resolution of 10 m and an average SNR of 8 dB with no postprocessing. This implies a >3 dB improvement in SNR over a first-order Raman-assisted setup with similar characteristics, Ministerio de Economía y Competitividad, Ministerio de Ciencia e Innovación, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Phase-sensitive optical time domain reflectometer assisted by first-order raman amplification for distributed vibration sensing over >100 km

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Filograno, M. L.
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
In this study, the authors present an experimental and theoretical description of the use of first order Raman amplification to improve the performance of a Phase-sensitive optical time domain reflectometer (φ OTDR) when used for vibration measurements over very long distances. A special emphasis is given to the noise which is carefully characterized and minimized along the setup. A semiconductor optical amplifier and an optical switch are used to greatly decrease the intra-band coherent noise of the setup and balanced detection is used to minimize the effects of RIN transferred from the Raman pumps. The sensor was able to detect vibrations of up to 250 Hz (close to the limits set by the time of flight of light pulses) with a resolution of 10 m in a range of 125 km. To achieve the above performance, no post-processing was required in the φOTDR signal. The evolution of the φOTDR signal along the fiber is also shown to have a good agreement with the theoretical model., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Long-range static and dynamic distributed sensing

  • González Herráez, Miguel|||0000-0003-2555-2971
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • López Gil, Alexia Inés
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Angulo Vinuesa, Xabier
  • Corredera Guillén, Pedro
In the past few decades, Brillouin-based distributed temperature and strain sensors have attracted the attention of both the academic and industrial sectors. In particular, B-OTDA systems have been lately a trendy study area due to their numerous and well proofed applications, such as in monitoring large civil structures, energy transportation or environmental applications. One of the main areas of research in B-OTDA sensors focuses on the extension of the measuring range. To do so, it becomes necessary to increase the signal to noise ratio (SNR) of the sensor, in particular considering the reduced signal contrast at the far end of the fiber. Several techniques have been applied in order to achieve this goal, such as Raman amplification and pulse coding. Here, we review some of these techniques (particularly Raman amplification) and their application for range extension of these sensors beyond the 100 km range. In addition, we discuss routes to perform dynamic measurements over such ultra-long spans, European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Coherent noise reduction in high visibility phase-sensitive optical time domain reflectometer for distributed sensing of ultrasonic waves

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Filograno, M. L.
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
Phase-sensitive optical time domain reflectometry (\phi \hbox{OTDR}) is a simple and effective tool allowing the distributed monitoring of vibrations along single-mode fibers. Up to now, \phi {\rm OTDRs} have been used mostly for the measurement of sub-kHz vibrations, normally in the context of intrusion sensing. In this paper, the authors present an experimental and theoretical description of a high-visibility \phi {\rm OTDR} and its performance when used for ultrasonic vibration measurements. The use of a semiconductor optical amplifier in the setup allows to suppress coherent noise and also to improve the spectral response of the pump pulses. These two advantages greatly decrease the detected intra-band noise thus allowing frequency measurements in the limits set by the time of flight of the light pulses while maintaining the simplicity of the scheme, as no post-processing, extremely high coherence lasers or coherent detection methods are required. The sensor was able to measure vibrations of up to 39.5 kHz with a resolution of 5 m over a range which could go up to 1.25 km. This is the first time to our knowledge that a fully distributed measurement of ultrasonic waves was achieved. The statistical behavior of the system was also described theoretically and characterized experimentally, European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Non-local effects in dual-probe-sideband Brillouin optical time domain analysis

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Angulo Vinuesa, Xabier
  • López Gil, Alexia Inés
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
According to recent models, non-local effects in dual-probesideband Brillouin Optical Time Domain Analysis (BOTDA) systems should be essentially negligible whenever the probe power is below the Stimulated Brillouin Scattering (SBS) threshold. This paper shows that actually there appear non-local effects in this type of systems before the SBS threshold. To explain these effects it is necessary to take into account a full spectral description of the SBS process. The pump pulse experiences a frequency-dependent spectral deformation that affects the readout process differently in the gain and loss configurations. This paper provides a simple analytical model of this phenomenon, which is validated against compelling experimental data, showing good agreement. The main conclusion of our study is that the measurements in gain configuration are more robust to this non-local effect than the loss configuration. Experimental and theoretical results show that, for a total probe wave power of ~1 mW (500 μW on each sideband), there is an up-shifting of ~1 MHz in the Brillouin Frequency Shift (BFS) retrieved from the Brillouin Loss Spectrum, whereas the BFS extracted from the measured Brillouin Gain Spectrum is up-shifted only ~0.6 MHz. These results are of particular interest for manufacturers of longrange BOTDA systems., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Soil Management Effects on Grapevine Water Uptake Depth in a Mediterranean Vineyard

  • Ruiz, Itxaso
  • Schwendenmann, Luitgard
  • Barbeta, Adrià
  • Lehmann, Marco M.
  • Parmo, Roberto
  • Aizpurua, Ana
In Mediterranean vineyards, soils are often managed with tillage or herbicides to limit weed growth and competition for resources. However, with rising concerns about water scarcity and climate change, cover crops are being reconsidered as sustainable alternatives to conserve soil moisture and support adaptation through better soil structure and biodiversity. Although they are often reported to decrease yields, this is not always the case, and the magnitude and timing of their competition for resources with vines are still not well understood. To address this gap, we examined vine and cover crop water uptake depth during veraison in August in a vineyard from Rioja Alavesa, Spain. We compared tillage (control treatment) with spontaneous cover crop. Using the isotopic composition of plant and soil water (δ18O and δ2H) and Bayesian mixing models, we found that the cover crop relied on water from the upper soil (100% from 0 to 30 cm), while vines under cover crop accessed water from shallow (~48% from 0 to 30 cm) and deeper soil layers (~52% from 30 to 100 cm). Despite cover crops and vines competing for water in the upper soil, the vine's ability to access water from both shallow and deeper soil horizons helped maintain its water status during veraison. Vines under tillage relied predominantly on water in the deeper soil (~73% from 30 to 100 cm). These results indicate that soil management strongly influences vine water uptake patterns. In our vineyard, the spontaneous summer cover crop did not compromise vine water availability during veraison., We would like to thank winegrowers Eva and Luis, from Maisulan Vineyard, for their valuable collaboration and commitment to sustainable management. The authors acknowledge the INTERREG Sudoe MONTCLIMA, VITISAD, and VITISAD 2 Projects for providing the field trial on which this study is based. This work was carried out within the framework of the IsWINE Project (no. 101152621), funded by the Marie Skłodowska-Curie Actions (HORIZON-MSCA-2023-PF-01) under the Horizon Europe programme. We also acknowledge Matthias Saurer and Manuela Oettli at WSL Birmensdorf for technical assistance with isotope measurements, and Neiker for providing laboratory facilities and technical support. M.M.L. was supported by the Swiss National Science Foundation (#213367, #229377). Open access publishing facilitated by The University of Auckland, as part of the Wiley - The University of Auckland agreement via the Council of Australasian University Librarians., info:eu-repo/semantics/publishedVersion