Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 51
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modelling canopy fuel and forest stand variables and characterizing the influence of thinning in the stand structure using airborne LiDAR, Estimación de variables de combustible de copa y de masa, caracterizando el efecto de las claras en su estructura usando LiDAR aerotransportado

  • Hevia, A.
  • Álvarez-González, J. G.
  • Ruiz-Fernández, E.
  • Prendes, C.
  • Ruiz-González, A. D.
  • Majada, J.
  • González-Ferreiro, E.
[EN] Forest fires are a major threat in NW Spain. The importance and frequency of these events in the area suggests the need for fuel management programs to reduce the spread and severity of forest fires. Thinning treatments can contribute for fire risk reduction, because they cut off the horizontal continuity of forest fuels. Besides, it is necessary to conduct a fire risk management based on the knowledge of fuel allocation, since fire behaviour and fire spread study is dependent on the spatial factor. Therefore, mapping fuel for different silvicultural scenarios is essential. Modelling forest variables and forest structure parameters from LiDAR technology is the starting point for developing spatially explicit maps. This is essential in the generation of fuel maps since field measurements of canopy fuel variables is not feasible. In the present study, we evaluated the potential of LiDAR technology to estimate canopy fuel variables and other stand variables, as well as to identify structural differences between silvicultural managed and unmanaged P. pinaster Ait. stands. Independent variables (LiDAR metrics) of greater explanatory significance were identified and regression analyses indicated strong relationships between those and field-derived variables (R2 varied between 0.86 and 0.97). Significant differences were found in some LiDAR metrics when compared thinned and unthinned stands. Results showed that LiDAR technology allows to model canopy fuel and stand variables with high precision in this species, and provides useful information for identifying areas with and without silvicultural management., [ES] Los incendios forestales suponen una gran amenaza en el NO de España. La importancia y frecuencia de estos eventos en la zona sugiere la necesidad de programas de gestión del combustible para reducir la propagación y severidad de los incendios. La realización de una selvicultura de claras puede contribuir a la reducción del riesgo de incendio, ya que ocasiona una ruptura de la continuidad horizontal del combustible forestal. Además, es necesario realizar una gestión del riesgo de incendio basada en el conocimiento de la localización del combustible sobre el terreno, puesto que el estudio del comportamiento de un incendio y la simulación de la propagación del fuego son dependientes del factor espacial. Por ello, resulta esencial la generación de mapas del combustible para diferentes escenarios selvícolas. La elaboración de modelos de estimación de variables dasométricas y de estructura de la masa a partir de tecnología LiDAR es el punto de inicio para la elaboración de una cartografía espacialmente explícita. Esto adquiere mayor valor en los mapas de combustible puesto que la medición de las variables en campo resulta inviable. En el presente estudio, evaluamos el potencial de la tecnología LiDAR para estimar variables del combustible de copa y otras variables de masa, así como para identificar diferencias estructurales a nivel de rodal en masas de Pinus pinasterAit. con y sin manejo selvícola. Las variables independientes (métricas LiDAR) de mayor importancia explicativa fueron identificadas y los análisis de regresión indicaron fuertes relaciones entre éstas y las variables medidas en campo (R2 varió entre 0.86 y 0.97). Por otra parte, se observaron diferencias significativas en algunas métricas LiDAR cuando se compararon masas aclaradas y no aclaradas. Los resultados demostraron que la tecnología LiDAR permite la modelización de variables de masa y de combustible de copa con alta precisión en esta especie, y que proporciona información útil para la identificación de áreas con y sin gestión selvícola, We thank the funding of: i) FORRISK project (Interreg IVB SUDOE 2007-2013), ii) Forest Services of the Government of the Principality of Asturias, and iii) Galician Government and European Social Fund (Official Journal of Galicia – DOG nº 52, 17/03/2014 p. 11343, exp: POS-A/2013/049). We also thank the staff from SERIDA and CETEMAS who participated in the fieldwork. Finally, we also acknowledge the comments of the Reviewers and Editor that have contributed to enhance this study
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Estimación de la biomasa forestal con imágenes de Sentinel-2 para la mejora de la gestión forestal en zonas mediterráneas

  • Vinué Visús, David
[ES] Se ha obtenido un método de estimación de la biomasa rápido, fiable y replicable en cualquier estructura forestal basado en un reducido y sencillo inventario forestal, imágenes de satélite de alta resolución espacial y resolución espectral en los rangos del visible y del infrarrojo cercano y medio y un vínculo entre las variables dependientes e independientes por medio de métodos de regresión por procesos gaussianos. Se han comparado los métodos utilizados para la estimación de la biomasa y se ha constatado tanto que no existe un método estandarizado como que la obtención de los datos de campo, la realización de los inventarios y el cálculo de la biomasa como verdad-terreno y variable dependiente no siempre recibe la importancia que necesita y, por tanto, los resultados no siempre son comparables. Se ha introducido también el uso de las ecuaciones alométricas de biomasa, que describen la relación del diámetro y de la altura con la biomasa, tanto de cada fracción arbórea como del total de cada pie y se han ensayado también otros métodos de adquisición de datos de campo para confrontarlos con esta metodología, aunque finalmente se ha determinado que la sencillez, rapidez y bajo coste de estos métodos deben ser incorporados a un protocolo único de obtención de la biomasa para que todos los análisis puedan ser homogéneos y comparables. Para conseguir la definición de un método replicable en diversas condiciones y estructuras forestales, se han seleccionado áreas de interés en montes jóvenes y maduros en condiciones de clima mediterráneo Csa y Csb según la clasificación de Köppen-Geiger. Sobre estas zonas se han experimentado diferentes métodos de estimación de la biomasa. Para sobrepasar los límites del aprendizaje clásico por métodos paramétricos, se ha ensayado el uso de métodos no paramétricos mediante procesos gaussianos, utilizando el término proceso para referirse a una colección de variables aleatorias que se pueden definir a través de una densidad de probabilidad como una gaussiana. Al existir esta densidad de probabilidad no es necesario ajustar al mismo tiempo un gran número de parámetros, lo que restringe la capacidad de modelar con flexibilidad los coeficientes de las variables. Este método de aprendizaje automático es capaz de explicar un alto porcentaje de la variabilidad de la biomasa en un monte con distintas clases de estructura por edad siempre que la entrada de datos se halle segmentada, es decir, que se clasifique no sólo por los valores de biomasa sino por las condiciones de cobertura y tipo de formación recogidas en el inventario. Al haberse validado el método con dos sensores diferentes se ha podido aplicar este mismo método en dos fechas separadas varios años para evaluar el crecimiento de las masas forestales según haya mediado un tipo de gestión forestal o su ausencia. Se han podido determinar diferencias estadísticamente significativas en el crecimiento a pesar de que la distribución de valores de reflectividad para cada fecha no las tiene. Se ha evaluado la capacidad de este método en áreas donde las diferencias estructurales, de edad y de biomasa no son tan marcadas como en las masas adultas. En un regenerado post-incendio se han podido determinar las zonas de más densidad con el mismo método y sin segmentación de clases. Este trabajo se ha enfocado en la obtención de un método replicable que pueda ser de fácil aplicación incluso por técnicos sin formación avanzada y con la intención de ser una herramienta cotidiana para la gestión forestal. Para poder ser implementado en condiciones reales de uso por administraciones y empresas se ha utilizado un lenguaje de programación de libre acceso. El programa se ha configurado para que el usuario realice el mínimo procesado posible y se obtengan automáticamente los mapas de biomasa de la zona deseada., [CA] S'ha obtingut un mètode d'estimació de la biomassa ràpid, fiable i *replicable en qualsevol estructura forestal basat en un reduït i senzill inventari forestal, imatges de satèl·lit d'alta resolució espacial i resolució espectral en els rangs del visible i de l'infraroig pròxim i mitjà i un vincle entre les variables dependents i independents per mitjà de mètodes de regressió per processos gaussians. S'han comparat els mètodes utilitzats per a l'estimació de la biomassa i s'ha constatat tant que no existeix un mètode estandarditzat com que l'obtenció de les dades de camp, la realització dels inventaris i el càlcul de la biomassa com a veritat-terreny i variable dependent no sempre rep la importància que necessita i, per tant, els resultats no sempre són comparables. S'ha introduït també l'ús de les equacions alométriques de biomassa, que descriuen la relació del diàmetre i de l'altura amb la biomassa, tant de cada fracció arbòria com del total de cada peu i s'han assajat també altres mètodes d'adquisició de dades de camp per a confrontar-los amb aquesta metodologia, encara que finalment s'ha determinat que la senzillesa, rapidesa i baix cost d'aquests mètodes han de ser incorporats a un protocol únic d'obtenció de la biomassa perquè totes les anàlisis puguen ser homogenis i comparables. Per a aconseguir la definició d'un mètode replicable en diverses condicions i estructures forestals, s'han seleccionat àrees d'interés en boscos joves i madures en condicions de clima mediterrani Csa i Csb segons la classificació de Köppen-Geiger. Sobre aquestes zones s'han experimentat diferents mètodes d'estimació de la biomassa. Per a sobrepassar els límits de l'aprenentatge clàssic per mètodes paramètrics, s'ha assajat l'ús de mètodes no paramètrics mitjançant processos gaussians, utilitzant el terme processe per a referir-se a una col·lecció de variables aleatòries que es poden definir a través d'una densitat de probabilitat com una gaussiana. En existir aquesta densitat de probabilitat no és necessari ajustar al mateix temps un gran nombre de paràmetres, la qual cosa restringeix la capacitat de modelar amb flexibilitat els coeficients de les variables. Aquest mètode d'aprenentatge automàtic és capaç d'explicar un alt percentatge de la variabilitat de la biomassa en un bosc amb diferents classes d'estructura per edat sempre que l'entrada de dades es trobe segmentada, és a dir, que es classifique no sols pels valors de biomassa sinó per les condicions de cobertura i tipus de formació recollides en l'inventari. En haver-se validat el mètode amb dos sensors diferents s'ha pogut aplicar aquest mateix mètode en dues dates separades diversos anys per a avaluar el creixement de les masses forestals segons haja mediat un tipus de gestió forestal o la seua absència. S'han pogut determinar diferències estadísticament significatives en el creixement a pesar que la distribució de valors de reflectivitat per a cada data no les té. S'ha avaluat la capacitat d'aquest mètode en àrees on les diferències estructurals, d'edat i de biomassa no són tan marcades com en les masses adultes. En un regenerat post-incendie s'han pogut determinar les zones de més densitat amb el mateix mètode i sense segmentació de classes. Aquest treball s'ha enfocat en l'obtenció d'un mètode replicable que puga ser de fàcil aplicació fins i tot per tècnics sense formació avançada i amb la intenció de ser una eina quotidiana per a la gestió forestal. Per a poder ser implementat en condicions reals d'ús per administracions i empreses s'ha utilitzat un llenguatge de programació de lliure accés. El programa s'ha configurat perquè l'usuari realitze el mínim processament possible i s'obtinguen automàticament els mapes de biomassa de la zona desitjada., [EN] A fast, reliable and replicable biomass estimation method has been obtained for any forest structure based on a reduced and simple forest inventory, satellite images of high spatial resolution and spectral resolution in the visible and near and mid-infrared ranges, and a link between the dependent and independent variables by means of Gaussian process regression methods. The methods used for biomass estimation have been compared and it has been found that there is no standardized method and that the collection of field data, the making of inventories and the calculation of biomass as ground-truth and dependent variable are not always given the importance they need and, therefore, the results are not always comparable. It has been introduced introduced the use of allometric biomass equations, which describe the relationship of diameter and height with biomass, both of each tree fraction and of the total of each stand, and we have also tested other methods of field data acquisition to compare them with this methodology, although we have finally determined that the simplicity, speed and low cost of these methods should be incorporated into a single protocol for obtaining biomass so that all the analyses can be homogeneous and comparable. To achieve the definition of a replicable method in different conditions and forest structures, areas of interest have been selected in young and mature forests in Mediterranean climate conditions Csa and Csb according to the Köppen-Geiger classification. Different biomass estimation methods have been experimented on these areas. In order to overcome the limits of classical learning by parametric methods, the use of non-parametric methods using Gaussian processes has been tested, using the term process to refer to a collection of random variables that can be defined through a probability density as a Gaussian. Since this probability density exists, it is not necessary to fit a large number of parameters at the same time, which restricts the ability to flexibly model the coefficients of the variables. This machine learning method is able to explain a high percentage of the biomass variability in a forest with different age structure classes as long as the data input is segmented, i.e. classified not only by biomass values but also by the cover conditions and type of formation collected in the inventory. As the method has been validated with two different sensors, it has been possible to apply the same method on two separate dates several years apart to evaluate the growth of forest stands according to the type of forest management or its absence. Statistically significant differences in growth could be determined despite the fact that the distribution of reflectivity values for each date does not have them. The capacity of this method has been evaluated in areas where structural, age and biomass differences are not as marked as in adult stands. In a post-fire regeneration it has been possible to determine the most dense areas with the same method and without class segmentation. This work has focused on obtaining a replicable method that can be easily applied even by technicians without advanced training and with the intention of being a daily tool for forest management. In order to be implemented in real conditions of use by administrations and companies, a freely available programming language has been used. The program has been configured so that the user performs as little processing as possible and automatically obtains the biomass maps of the desired area., This research was funded by the Interreg SUDOE Program through the European Regional Development Fund (ERDF): Interreg SUDOE REMAS project (SOE3/P4/E0954) “Greenhouse gas emissions risk management in forest fires” (2019–2022)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Analysis of the Lisbon metropolitan area using the P-SBAS service of the Geohazards Exploitation Platform

  • Galve, Jorge
  • Reyes-Carmona, Cristina
  • Barra, Anna
  • Béjar-Pizarro, Marta
  • Monserrat, Oriol
  • Garcia Campus, Ricardo
  • Zezere, Jose Luis
  • de Figueiredo Ferreira, Paulo
  • Figueira Damaso, Sara
  • Magro Siborro, Susana
  • Mateos, Rosa
  • Azañón, José Miguel
[EN] Web platforms and cloud computing are revolutionizing the remote sensing methodologies and improve significantly the capacity to analyze the Earth surface. Here, we present the Geohazard Exploitation Platform (GEP) of the European Space Agency (ESA) and, particularly, an application of the P-SBAS service of this platform on the Lisbon metropolitan area. The analysis was developed as part of the project RISKCOAST that deals with coastal hazards, seeking to test diverse methodologies to monitor them. The region of Lisbon is a pilot area of this project because different surficial and coastal processes impact it. To analyze this region, we generated through GEP a deformation map over 3,000 km2 of the Portuguese coast where 2.8 million people live. Thanks to GEP we generated the map in only 24h. This deformation map serves us to recognize several places with ground instability problems. The main processes identified associated to those unstable terrains were landfill and sediment consolidation, active landslides and local subsidence most probably related to groundwater withdrawal. As far as we know, most of the detected deformations were not registered so far. We also detected deformations of unknown origin. Furthermore, we determined that an area previously affected by ground subsidence in the 90’s appears to be currently stable. The mentioned findings show how different processes due to the interaction of human activities and infrastructures with the ground can affect metropolitan areas. In the case of Lisbon metropolitan area, the municipalities can use the obtained information to know and to anticipate future issues regarding building and infrastructure damage. In this sense, this research is an example of how new InSAR technologies such as the modern cloud analytic platforms can serve to identify and monitor surficial processes in an easy way to prevent problems associated to unstable ground., The research was supported by the European Regional Development Fund (ERDF) through the project “RISKCOAST” (SOE3/P4/E0868) of the Interreg SUDOE Programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Biomass assessment and carbon sequestration in post-fire shrublands by means of Sentinel-2 and Gaussian processes

  • Vinué-Visús, David
  • Ruiz-Peinado, Ricardo
  • Fuente-Herraiz, David|||0000-0003-4141-7948
  • Oliver Villanueva, José Vicente|||0000-0003-2842-7834
  • Coll-Aliaga, Eloína|||0000-0001-8938-9216
  • LERMA ARCE, VICTORIA|||0000-0002-0433-7204
[EN] In this contribution, we assessed the biomass and carbon stock of a post-fire area covered by a young oak coppice of Quercus pyrenaica Willd. associated with shrubs, mainly of Cistus laurifolius L. This area was burned during the fire event of Chequilla (Guadalajara, Spain) in 2012. Sentinel-2 imagery was used together with our own forest inventories in 2020 and machine learning methods to assess the total biomass of the area. The inventory includes plots of total dry weight ranging between 6 and 14 Mg·ha¿1 with individuals up to 8 years old. Nonlinear, nonparametric Gaussian process regression methods were applied to link reflectance values from Sentinel-2 imagery with total shrub biomass. With a reduced inventory of only 32 plots covering 136 ha, the total biomass could be assessed with a root-mean-square error of 1.36 Mg·ha¿1 and a bias of ¿0.04 Mg·ha¿1, getting a relative error between 9.8% and 20.4% for the gathered biomass. This is a rather good estimation considering the little effort and time invested; thus, the suggested methodology is very suitable for forest monitoring and management., This research was funded by the Interreg SUDOE Program through the European Regional Development Fund (ERDF): Interreg SUDOE REMAS project (SOE3/P4/E0954) "Greenhouse gas emissions risk management in forest fires" (2019-2022).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

ADATools: a Set of Tools for the Analysis of Terrain Movement Maps Obtained with SAR Interferometry

  • Monserrat, Oriol
  • Barra, Anna
  • Reyes-Carmona, Cristina
  • Cuevas, María
  • Bejar Pizarro, Marta
  • Navarro, José
  • Tomas, Roberto
  • Galve, Jorge Pedro
  • Solari, Lorenzo
  • Sarro, Roberto
  • Mateos, Rosa Maria
  • Azañon, José Miguel
  • Herrera, Gerardo
  • Crippa, Bruno
[EN] The SAR Interferometry techniques, Persistent Scatterer Interferometry (PSI) among them, are nowadays known as important tools for monitoring Earth surface movements. Several regional and national Ground Motion Services based on PSI already exist. Moreover, since 2022 the European Ground Motion Service will be operational and will annually provide an updated displacement map over the whole Europe. This will suppose a big amount of ground displacement measurements along the European territory. For each measurement EGMS will provide the annual velocity and the time series of deformation covering the period 2014 to one year prior to each delivery. In this context, it will be more and more necessary having tools to ease the management, analysis, and interpretation, of those wide areas and huge amount of data. We present here a first step in this direction: the ADATools are a set of tools to automatically have secondary, and more operational, products derived from a PSI map. Starting from a fast extraction of the most significant Active Deformation Areas (ADA), with the ADAFinder tool, then we can have a preliminary classification of the most probable phenomena (landslides, subsidence, settlements, or sinkholes) that is behind the detected movement, with the ADAClassifier tool. Moreover, LOS2hv tool allows to derive the horizontal (east-west) and vertical components of the movement in case we have maps of ascending and descending geometries. Finally, it is presented a product that analyzes the local displacement gradients to generate potential damage maps in urban areas. The tools will be presented thorough some results obtained on an area of the Granada County with the use of Sentinel-1 data. All the results have been achieved within the framework of the Riskcoast Project (financed by the Interreg Sudoe Program through the European Regional Development Fund, ERDF)., This work was mainly supported by the European Regional Development Fund (ERDF) through the project “RISKCOAST” (SOE3/P4/E0868) of the Interreg SUDOE Programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Conscious architecture and circular economy for a transition in building: The IMIP project as a case study

  • Gilabert-Sanz, Salvador
  • Oliver Villanueva, José Vicente|||0000-0003-2842-7834
[EN] This research explores the role of design in fostering sustainable transitions through systemic thinking in the building sector, addressing the dynamic, multi-scalar, multi-species, and transdisciplinary challenges inherent in socio-ecological and socio-technical transformations. The study is grounded in Transition Design principles, recognizing the agency of ecological, human, and computational intelligence. By embracing systemic approaches, this paper underscores the importance of long-term thinking, collective action, pluralistic perspectives, and value co-creation among diverse actors. The results highlight the IMIP (Innovative Eco-Construction System Based on Interlocking Modular Insulation Wood & Cork-Based Panels) project s contribution to circular economy principles, demonstrating its environmental and social impact through a comprehensive Life Cycle Assessment (LCA), as an innovative holistic approach to low-energy construction and near-zero-emissions strategies in construction, leveraging local timber and cork as materials for construction systems in building. These results demonstrate the potential of locally based bio-based materials and modular construction systems to promote circularity, reduce ecological footprints, and enhance community resilience. The findings reinforce the significance of design as a driver of systemic change in the building sector, emphasizing the interdependencies and feedback loops between human actions, natural ecosystems, and technological infrastructures., European Interreg Sudoe Program 2021-2024
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Interlocking Modular Insulation Panels Manufactured with Mediterranean Pinewood and Cork

  • Brunet-Navarro, Pau
  • Gilabert Sanz, Salvador
  • Monleón Doménech, Melchor
  • Hermoso, Eva
  • Sánchez-González, Mariola
  • Luengo, Emilio
  • Mandrara, Zaratiana
  • Gominho, Jorge
  • Redón-Santafé, Miguel|||0000-0002-4581-1590
  • Oliver Villanueva, José Vicente|||0000-0003-2842-7834
[EN] Economic profitability of harvested softwood in Southwestern Europe is limited for low quality logs. Some social and environmental consequences of low incomes of rural activities are rural depopulation and accumulation of biomass in unmanaged forests. The energy efficiency of buildings could be improved as construction material employing local bioresources that are currently used to manufacture products of low added value. Here, the IMIP project (Innovative Eco-Construction System Based on Interlocking Modular Insulation Wood & Cork-Based Panels) aimed to support the change towards a low carbon economy using bioproducts (pinewood and cork) for smart, sustainable, and inclusive growth with a special focus on the public construction sector is presented. The main objective of the IMIP project is to design, validate and implement an innovative ecological construction system based on natural biological materials to improve energy efficiency in public buildings from the construction, use and demolition phases. The project also develops a tool to professionals from the construction sector (architects and engineers) and researchers to assess the carbon footprint of buildings. The products of the project have the ambition to improve the economic, social and environmental situation of rural areas of Southwestern Europe., This research was funded by the Interreg SUDOE program as part of the European Regional Development Found (ERDF), grant number SOE3/P3/E0963.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of electrical signals in pine trees in a mediterranean forest ecosystem

  • Zapata, Rodolfo
  • Luzuriaga, Jorge E.
  • Oliver Villanueva, José Vicente|||0000-0003-2842-7834
  • Lemus Zúñiga, Lenin Guillermo|||0000-0002-6361-6019
  • Mateo Pla, Miguel Ángel|||0000-0002-8059-6996
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
[EN] Electric potential differences in living plants are explained by theories based on sap flow. In order to acquire more advanced knowledge about the spatial distribution of these electric potential measures in trees, this research aims to analyze electrical signals in a population of Aleppo pines (Pinus halepensisMill.) in a representative Mediterranean forest ecosystem. The specific research objective is to assess some of the most significant factors that influence the distribution pattern of those electric signals: tree age, measurement type and electrode placement. The research has been conducted in representative forest stands, obtaining measurements of different representative trees. After a statistical evaluation of the obtained results, the main conclusions of our research are: A.Tree maturity influences directly on electric potential. B.Maximum electrical signals can be measured in young pines showing values of 0.6 V and 0.6 mu A for voltage and current, respectively. C.The distribution patterns of both voltage and short-circuit current depending on electrode placement are uniform.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis de maestría (MasterThesis)

Propuesta de compensación al sector forestal valenciano de la emisión de gases de efecto invernadero (GEI) derivados de las actividades de operación y mantenimiento del Puerto de Valencia tras la ejecución del Proyecto de Ampliación

  • Yagüe-Hurtado, Celia|||0000-0002-7904-1686
[ES] Los mercados voluntarios de carbono abren una oportunidad para establecer mecanismos de compensación entre sectores emisores, principalmente los sectores no sujetos al régimen de derechos de emisiones de la Unión Europea (ETS), y la gestión forestal sostenible, orientada a conservar y potenciar los sumideros de carbono. Para avanzar en esta línea, la finalidad del TFM es proponer un mecanismo de compensación de las emisiones de gases de efecto invernadero tomando como caso de estudio el Puerto de València, potencial agente demandante de bonos. Para cuantificar la oferta de bonos disponibles, se han analizado los ecosistemas forestales de los MUP de los municipios de la provincia de València. Estos bonos son generados en base a los beneficios de la gestión forestal frente al cambio climático, ayudando a la persistencia de la masa y previniendo incendios forestales mediante actuaciones selvícolas. Dichos bonos, medidos en t de CO2 equivalente, ponen en valor tanto la disminución del riesgo de emisión de CO2 debido a la disminución del riesgo de incendios por disminución del combustible, como el efecto sumidero y sustitutivo del aprovechamiento de la biomasa extraída en las actuaciones. Para ello, se ha cuantificado, por un lado, el aumento de las emisiones por las actividades de operación y mantenimiento del Puerto de València tras la ejecución del Proyecto de Ampliación, prevista para el año 2025, mediante la simulación de tres escenarios (año 2016, actualidad y futuro tras la ampliación). Por otro lado, se han cuantificado tanto las existencias de biomasa forestal actuales, como la biomasa extraída tras las actuaciones de prevención de incendios establecidas (claras preparatorias y desbroces) y la evolución del carbono remanente, el riesgo de incendios y el riesgo de emisión. Adicionalmente, se ha estudiado su inclusión como un tercer esquema de compensación dentro del mercado nacional voluntario de compensación de carbono: el Registro Huella de Carbono, los mecanismos de Medición, Revisión y Verificación que incluyen la teledetección para la reducción de costes de transacción, y el precio del bono en base a otros mercados existentes de similares características. Los resultados obtenidos apuntan a la viabilidad de la alternativa planteada como forma de solventar el debate político a la vez que se invierte en la gestión forestal sostenible de los montes valencianos. Se prevé que para el año 2025, las emisiones de GEI del Puerto de València asciendan a 266.870 t CO2 eq. al año, lo cual supone un incremento con respecto a la actualidad del 61,5%. Por su parte, las masas forestales de los MUP de la provincia de Valencia almacenan en la actualidad 15.088.577 t CO2 eq. Tras considerar la reducción del riesgo de emisión por disminución del riesgo de incendio tras las actuaciones propuestas (claras preparatorias y desbroces) en los estratos 1 y 2 del 3er IFN, y las emisiones evitadas por efecto sumidero y sustitutivo del aprovechamiento de la biomasa extraída, se obtienen 5.793.379 bonos anuales. Es por ello que, tras la potencial adquisición de bonos por parte del Puerto de València, todavía quedarían 5.526.509 bonos disponibles para su adquisición por parte de otros agentes emisores interesados de la provincia de València. Esto apunta a que el mercado tiene capacidad para expandirse a la Comunitat Valenciana y que también puede ser replicable por otras Comunidades Autónomas que posean ecosistemas de tipo mediterráneo., [EN] Voluntary carbon markets open an opportunity to establish compensation mechanisms between emitting sectors, mainly sectors not subject to the European Union's emission rights regime (ETS), and sustainable forest management, aimed at conserving and enhancing the sinks of carbon. In this sense, the purpose of the TFM is to propose a compensation mechanism for greenhouse gas emissions, taking the Valencia¿s Harbour, a potential bond-demanding agent, as a case study. To quantify the offer of available bonds, the forest ecosystems of the public utility mounts of the municipalities of the Valencia¿s province have been analysed. These bonuses are generated based on the benefits of forest management against climate change, helping the persistence of the mass and preventing forest fires through silvicultural actions. These bonds, measured in t of equivalent CO2, highlight both the decrease in the risk of CO2 emissions due to the decrease in the risk of fires because of the decrease in fuel, as well as the sink and substitute effect of the use of the biomass extracted in the actions. To do so, on the one hand, the increase in emissions from the operation and maintenance activities of the Valencia¿s Harbour has been quantified after the execution of the Expansion Project, scheduled for the year 2025, by simulating three scenarios (2016 , current and future after enlargement). On the other hand, both the current forest biomass stocks have been quantified, as well as the biomass extracted after the established fire prevention actions (clear preparations and clearings) and the evolution of the remaining carbon, the risk of fires and the risk of emission. Additionally, its inclusion as a third compensation scheme within the voluntary national carbon offset market has been studied: the Carbon Footprint Registry, the Measurement, Review and Verification mechanisms that include remote sensing to reduce transaction costs, and the price of the bond based on other existing markets. The results obtained point to the viability of the alternative proposed as a way of solving the political debate while investing in sustainable forest management in the Valencian forests. It is anticipated that by the year 2025, the GHG emissions of the Valencia¿s Harbour will amount to 266,870 t CO2 eq. per year, which represents an increase over the current of 61.5%. For its part, the forest stands of the public utility mounts in the province of Valencia currently store 15,088,577 t CO2 eq. After considering the reduction of the emission risk due to a reduction in the risk of fire after the proposed actions (clear preparations and clearings) in strata 1 and 2 of the 3rd IFN, and the emissions avoided due to the sink and substitute effect of the use of the biomass extracted, 5,793,379 annual bonuses are obtained. For this reason, after the potential acquisition of bonds by the Port of Valencia, there would still be 5,526,509 bonds available for acquisition by other interested issuing agents in the province of Valencia. This indicates that the market has the capacity to expand to the Valencian Community and that it can also be replicated by other Autonomous Communities that have Mediterranean-type ecosystems.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of a Model to Estimate the Risk of Emission of Greenhouse Gases from Forest Fires

  • LERMA ARCE, VICTORIA|||0000-0002-0433-7204
  • Yagüe-Hurtado, Celia|||0000-0002-7904-1686
  • Van Den Berg-Sesma, Helena Carmen
  • Oliver Villanueva, José Vicente|||0000-0003-2842-7834
  • Lorenzo-Sáez, Edgar|||0000-0003-3766-1198
  • García-Folgado, Miguel
  • Benhalima, Yacine
  • Marqués-Duarte, Inês
  • Acaçio, Vanda
  • Rego, Francisco C.
  • López-Senespleda, Eduardo
  • Menéndez-Miguélez, María
  • Ruiz-Peinado, Ricardo
  • Petillon, Thomas
  • Jalabert, Stephanie
  • Carbó-Valverde, Ester
  • Gimeno-García, Eugenia
  • Aleix-Amurrio, Rebeca
[EN] While the Mediterranean basin is foreseen to be highly affected by climate change (CC) and severe forest fires are expected to be more frequent, international efforts to fight against CC do not consider forest fires¿ greenhouse gas (GHG) emissions risk and the possibility of its mitigation. This is partly due to a lack of a methodology for GHG risk spatial assessment and consideration of the high value of carbon stocks in forest ecosystems and their intrinsic risk. To revert this, an innovative GHG emission risk model has been developed and implemented in a pilot forest area. This model considers geospatial variables to build up emission vulnerability based on potential fire severity and resistance of a landscape, value at risk and the hazard of a fire occurrence. The results classify low, moderate and high emission risks in the analysed areas. This identification of hotspots allows the prioritisation of fire prevention measures in a region to maximise the reduction of GHG emissions in the case of a fire event. This constitutes the first step in a holistic and consistent CC mitigation that not only considers anthropic GHG sources but also possible GHG emissions by forest fires that can be actively prevented, managed and reduced., This research was financed by the REMAS project (co-financed by the Interreg Sudoe Programme through the European Regional Development Fund (ERDF), grant number "SOE3/P4/E0954".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Potential Analysis of Mediterranean Forestry for Offsetting GHG Emissions at Regional Level: Evidence from Valencia, Spain

  • Lorenzo-Sáez, Edgar|||0000-0003-3766-1198
  • Oliver Villanueva, José Vicente|||0000-0003-2842-7834
  • LERMA ARCE, VICTORIA|||0000-0002-0433-7204
  • Yagüe-Hurtado, Celia|||0000-0002-7904-1686
  • Lemus Zúñiga, Lenin Guillermo|||0000-0002-6361-6019
[EN] Forest management is an untapped tool, yet to realize its full potential to fight against climate change. The capability of forests to act as carbon sinks makes them a key resource to reduce CO2 concentration in the atmosphere. However, carbon which has been fixed can be suddenly emitted again as a consequence of disturbances such as pests or wildfires. Mediterranean plant phenology, climatic conditions, and the accumulation of fuel biomass due to abandonment of traditional forest uses generate a scenario prone to large wildfires and consequently large greenhouse gases (GHG) emissions. The abandonment could be offset by considering the economic value of forest ecosystem services, principally carbon fixation. Nevertheless, currently existing forest carbon markets consider only anthropogenic fixation based on a business as usual scenario without disturbances that cannot be applied to Mediterranean forest reality. Thus, a methodology to monetize carbon fixed has been developed and applied. A range between 55.5 and 250 million euro produced by the monetization of 16.5 million potential carbon credits has been obtained based on anthropogenic avoided emissions produced over a 10 year-period. Thereby, the potential for offsetting emissions of the pilot region was between 1.2% and 5.6% of total diffuse GHG emissions. Consequently, sustainable forest management represents an important opportunity to combat climate change, taking advantage of the margin of improvement that the Mediterranean forests currently have to avoid GHG emissions through forest fire prevention silviculture., This research was funded by EIT Climate KIC in the frame of the ValVolCar project and by Interreg SUDOE REMAS project (SOE3/P4/E0954), project co-financed by the Interreg Sudoe Program through the European Regional Development Fund (ERDF).
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Soil Management Effects on Grapevine Water Uptake Depth in a Mediterranean Vineyard

  • Ruiz, Itxaso
  • Schwendenmann, Luitgard
  • Barbeta, Adrià
  • Lehmann, Marco M.
  • Parmo, Roberto
  • Aizpurua, Ana
In Mediterranean vineyards, soils are often managed with tillage or herbicides to limit weed growth and competition for resources. However, with rising concerns about water scarcity and climate change, cover crops are being reconsidered as sustainable alternatives to conserve soil moisture and support adaptation through better soil structure and biodiversity. Although they are often reported to decrease yields, this is not always the case, and the magnitude and timing of their competition for resources with vines are still not well understood. To address this gap, we examined vine and cover crop water uptake depth during veraison in August in a vineyard from Rioja Alavesa, Spain. We compared tillage (control treatment) with spontaneous cover crop. Using the isotopic composition of plant and soil water (δ18O and δ2H) and Bayesian mixing models, we found that the cover crop relied on water from the upper soil (100% from 0 to 30 cm), while vines under cover crop accessed water from shallow (~48% from 0 to 30 cm) and deeper soil layers (~52% from 30 to 100 cm). Despite cover crops and vines competing for water in the upper soil, the vine's ability to access water from both shallow and deeper soil horizons helped maintain its water status during veraison. Vines under tillage relied predominantly on water in the deeper soil (~73% from 30 to 100 cm). These results indicate that soil management strongly influences vine water uptake patterns. In our vineyard, the spontaneous summer cover crop did not compromise vine water availability during veraison., We would like to thank winegrowers Eva and Luis, from Maisulan Vineyard, for their valuable collaboration and commitment to sustainable management. The authors acknowledge the INTERREG Sudoe MONTCLIMA, VITISAD, and VITISAD 2 Projects for providing the field trial on which this study is based. This work was carried out within the framework of the IsWINE Project (no. 101152621), funded by the Marie Skłodowska-Curie Actions (HORIZON-MSCA-2023-PF-01) under the Horizon Europe programme. We also acknowledge Matthias Saurer and Manuela Oettli at WSL Birmensdorf for technical assistance with isotope measurements, and Neiker for providing laboratory facilities and technical support. M.M.L. was supported by the Swiss National Science Foundation (#213367, #229377). Open access publishing facilitated by The University of Auckland, as part of the Wiley - The University of Auckland agreement via the Council of Australasian University Librarians., info:eu-repo/semantics/publishedVersion
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

IoT Cloud-Based Power Quality Extended Functionality for Grid-Interactive Appliance Controllers

  • Garrido Zafra, Joaquín
  • Gil de Castro, Aurora
  • Savariego Fernández, Rafael
  • Liñán, Matías
  • García Torres, Félix
  • Moreno-Muñoz, A.
Due to the myriad of loads that are collected into commercial grid-interactive efficient buildings (GEBs) focused on the industry 4.0 paradigm, it is important to ensure their proper electrical operation. The power quality (PQ) here requires a granular monitoring approach, reaching a point where each device connected to the microgrid can diagnose whether its power supply is optimal. Otherwise, it can participate cooperatively in decision-making to avoid anomalies or faults in the microgrid. In this work, we present cloud-based extended functionality to make smart appliances responsive to the grid, either autonomously or managed under the open automated demand response standard. Further to acting as a switch, the main strength lies in its PQ monitoring via the FIWARE Internet of Things (IoT) platform with data-driven analytics capabilities. It identifies and even predicts a broad spectrum of electrical disturbances, far exceeding the capabilities of previous solutions such as the grid-friendly appliance controller, so it is possible to customize a battery of alarms at will (e.g., according to IEEE 1547 standard). Moreover, although it can act autonomously, its main mission will be to act in a coordinated manner, either cooperatively or under the supervision of the GEB Energy Management System. Finally, different case studies are presented to show their capabilities. With the integration of these distributed submetering systems, under standards IoT wireless communication protocols, a further step will be taken in the advent of the digital utility paradigm.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Aplicaciones de la teledetección para la evaluación del secuestro de carbono en matorrales post-incendio en el caso de estudio del incendio de Chequilla (Guadalajara) de 2012

  • Vinué-Visús, David
  • Lerma Arce, Victoria
  • Ruiz-Peinado, Ricardo
  • Van den Berg, Helena
  • Oliver-Villanueva, Jose Vicente
  • Liz Graña, J.L.
17 Pág. 8º Congreso Forestal Español Centro de Investigación Forestal (CIFOR), Se ha evaluado la biomasa y el carbono secuestrado en un área cubierta por un monte bajo de Quercus pyrenaica Willd. asociado principalmente a Cistus laurifolius L. recuperado tras el incendio forestal de Chequilla (Guadalajara, España) de 2012. Se han utilizado imágenes Sentinel-2 junto con inventarios que incluyen parcelas de biomasa total en peso seco de entre 5 y 14 Mg*ha-1. Se han utilizado métodos no lineales y no paramétricos de regresión por procesos gaussianos para relacionar los valores de reflectividad de las imágenes Sentinel-2 con la biomasa total de los arbustos. Con un inventario de 33 parcelas para 136 ha se puede evaluar la biomasa total con un RMSE de 1,58 Mg*ha-1 y un sesgo de 0,05 consiguiendo un error entre el 11,2 y el 28,8% para la biomasa estudiada, lo que supone una buena evaluación asociada a una baja intensidad y coste de inventario forestal. Los resultados indican una metodología apta para la gestión forestal, siendo asequible en términos de tiempo, coste, esfuerzos y capacidad de cálculo que puede ser replicada para analizar el balance de carbono en zonas sin gestión tras un incendio., Esta investigación ha sido financiada por el proyecto Interreg SUDOE REMAS - SOE3/P4/E0954 "Gestión del riesgo de emisiones de gases de efecto invernadero en los incendios forestales" (2019- 2022), cofinanciado por el Programa Interreg Sudoe a través del Fondo Europeo de Desarrollo Regional (FEDER), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One catastrophic flood every millennium: synchronicity of extreme floods and global warm periods in the multi-archive record of the Roman theatre of Guadix (Granada, SE Spain)

  • Díez Herrero, Andrés
  • Mateos Ruiz, Rosa María
  • Vázquez Tarrío, Daniel
  • López Marcos, Antonio
  • Brao González, F.J.
[EN] Past global changes are typically registered in both natural (e.g., geologic-geomorphological, atmospheric-climatic, hydrologic-glacial and biological) and cultural records (e.g., archaeological, historical and documentary sources). Nevertheless, there are few sites in the world where sedimentary and archaeological evidence combine to provide information about two or more past millennial climate changes. In this regard, the Roman city of Guadix (Granada, SE Spain) represents a singular location, whose Roman theatre (1st century CE), recently discovered in 2007, contains palaeo-flood evidences that can be related to the two latest global warm periods: the Roman and Medieval epochs. In this research, detailed geological analyses are carried out. These analyses consisted in careful descriptions of vertical stratigraphic sections (lithology, structures…) and lateral correlation panels; as well as fluvial facies models to interpret the sedimentary environments for each sequence. This sedimentological information was combined with the study of archaeological remains, radiocarbon dating and optically stimulated luminescence, and three major flood events have been identified: two of them dating back to the beginning of the 1st century CE (period of the Pax Romana Empire); and the other occurring at the end of the 12th century (Islamic Almohad period). Such extreme hydrological events were synchronous with two warm periods: the Roman Climatic Optimum and the Medieval Warm Period. This seems to suggest that the meteorological fluctuations associated to climate changes during warming periods (such as the current one associated with present-day climate change) very likely produce such extraordinary or extreme events, which can mobilise large amounts of solid load (sands, silts and clays) and trigger sudden changes in the configuration of the river system (channel avulsions, meander cut-offs and captures among tributaries) and alluvial fans (at tributary mouths). We believe that the documented observations provide an analogy for the current warming period. In this regard, flood risk management in the current city of Guadix, whose hazard and risk maps were drawn up according to the criteria of the European Flood Directive, should take into account: (i) the millennial recurrent character of catastrophic floods in Guadix, well above the 500-year return period officially considered; (ii) the importance of the mobilisation of solid load in flood hazard and risk, which can obstruct drains and reduce the capacity of channels and bridges; (iii) the geomorphological dynamics, capable of modifying the position of the channels and thus the delimitation of hazard and risk zones; (iv) the role of non-permanent tributaries of the Guadix River during storms and heavy rain, related to quasi-stationary convective cells. Only in this way, will flood hazard and risk maps be useful in territorial and urban planning, civil protection during emergencies and the reduction of damage from future catastrophic floods. The present study highlights how geoarchaeological and palaeo-environmental records can be a highly valuable source of data for the improvement of flood hazard assessments in the 21st Century., This work has been developed in the framework of the RISKCOAST Project: “Development of tools to prevent and manage geological risks on the coast linked to climate change” (Ref: SOE3/P4/E0868), funded by the Interreg SUDOE programme. This paleohydrological research is also part of the 2022-2023 grant signed between the Spanish Directorate General for Water (DGA-MITERD) and the Spanish National Research Council (CSIC-MCIN), which includes action 20223TE003 (IGME-CSIC Tarquín Project), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Crisis exercise in the framework of coastal geohazards: Experience in the Balearic islands (Spain)

  • Gasc-Barbier, Muriel
  • Mateos Ruiz, Rosa María
  • Iasio, Christian
  • Chanal, Anne
  • Villatte, Arnaud
  • Bernardie, Séverine
  • Reyes-Carmona, Cristina
  • Sarro Trigueros, Roberto
  • Martínez Corbella, Mónica
  • Luque Espinar, Juan Antonio
  • López-Vinielles, Juan
  • Monserrat, Oriol
[EN] Within an international cooperation network (France, Spain and Portugal) involving researchers, first responders and civil protection authorities, a crisis exercise was held simultaneously in Mallorca and Ibiza (Balearic Islands, Spain). The objectives were to test crisis management procedures defined by operational actors, integrating new developed scientific tools related to landslides and rockfalls, as well as the internal relationship with the new created Technical Advisory Committee. The initiative included a training module for all stakeholders before the exercise explaining the scientific tools used for supporting the decision-making process during the exercise, as well as a field trip in the Tramuntana range in Mallorca to gain first-hand knowledge of the geological hazards threatening the region, mainly rockfalls. More than 70 people were involved in the training exercise, including researchers, civil protection, civil guard, municipalities, representants of the autonomous regions, local and regional crisis management managers from different French and Spanish entities, etc. At the end of the exercise, a joint analysis was made of the strengths and weaknesses found during the development of the exercise and propositions of improvements were made. Local and regional authorities concluded that, thanks to the exercise, they are better prepared to deal with georisks induced by extreme weather, mainly landslides and rockfalls. The scientific community understood the type of operational products they should develop for decision support during disaster risk crises. This experience emphasizes the need to create stronger links between the scientific community and civil protection stakeholders., This work was supported by the European Regional Development Fund (ERDF) through the project “RISKCOAST” (SOE3/P4/E0868) of the Interreg SUDOE Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Seasonal rockfall risk analysis in a touristic island: Application to the Tramuntana Range (Mallorca, Spain)

  • Santos, Pedro Pinto
  • Reyes-Carmona, Cristina
  • Pereira, Susana da Silva
  • Sarro Trigueros, Roberto
  • Martínez Corbella, Mónica
  • Coll Ramis, Miquel Àngel
  • Zêzere, José Luís
  • Mateos Ruiz, Rosa María
[EN] Rockfalls are an ever-present possibility in the mountainous context of the Tramuntana Region (Mallorca, Spain). Recent events have shown the high potential for direct and indirect impact on the safety of people and economic activities, lasting for weeks or even months. In the present study, we start from a probabilistic assessment of the rockfall hazard (spatial propensity and temporal recurrence), based on a detailed historical record of occurrences and rockfall modelling, which is subsequently superimposed on three exposure scenarios and on a social vulnerability assessment. Exposure considers the floating population at three seasons of the year, given the area's high tourist aptitude. Vulnerability considers on the one hand the intrinsic characteristics of individuals and, on the other, the characteristics of the surrounding territory that act to facilitate emergency operations, mitigate the immediate impact and enhance rapid recovery. Due to the characteristics of the island and the spatial distribution of tourism, the results show that the highest density of rockfall trajectories potentially affect areas of high exposure, whose access by emergency services is complex. Not being, in general, the areas of highest individual criticality, those areas have in most situations low support capability installed or nearby. The results constitute a useful tool for emergency and risk management planning in multiple sectors linked to risk governance. Despite the high geographic detail of the analysis, these studies do not replace exposure and vulnerability analysis at the building level, for which the contribution of georeferenced Census data is fundamental., This work was supported by the European Regional Development Fund (ERDF) through the project "RISKCOAST” (SOE3/P4/E0868) of the Interreg SUDOE Programme, and by Associate Laboratory TERRA funding (LA/P/0092/2020). The work of Cristina Reyes-Carmona was partially funded by the Dragon 5-project ID 59339 (Ref: 4000138450/22/I-NB)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Potential socio-economic impacts of ground movements in the coastal municipalities of Spain: Insights from the supra-regional implementation of the European Ground Motion Service

  • López-Vinielles, Juan
  • Ezquerro Martín, Pablo
  • Béjar Pizarro, Marta
  • Sarro Trigueros, Roberto
  • Cuevas-González, María
  • Barra, Anna
  • Mateos Ruiz, Rosa María
[EN] This study assesses the vulnerability of the Spanish coastline—a major global tourism destination—to ground movements, providing for the first time initial estimates of the potential socio-economic impact of this phenomenon in this highly strategic territory. Using Interferometric Synthetic Aperture Radar (InSAR) data from the European Ground Motion Service (EGMS), an InSAR-based service developed under the Copernicus initiative, we evaluated the coastline's exposure to natural and human-induced ground movements, and their potential impacts on the road network, buildings, and population. Utilizing a suite of post-processing tools including ADAfinder, we identified a series of Active Deformation Areas (ADAs) and classified them based on their prevailing movement (vertical or horizontal) and displacement rate. As a result, a dataset consisting of 9010 ADAs spread across Spain's 805 coastal municipalities was generated, with 1916 ADAs affecting roadways and 2596 affecting buildings. Most ADAs exhibited predominant vertical movement, primarily associated with land subsidence, although ADAs exhibiting horizontal movement, mainly linked to landslides, were also significant. The majority of ADAs showed moderate to low displacement rates (<25 mm/yr). We calculated a potential economic impact (in 2021€ values) of €19,428.4 million, with €1716.4 million attributed to the road network and €17,712.0 million to buildings. Additionally, we identified a total of 134,236 people potentially vulnerable to these processes. Results highlight both a higher exposure of Spain's Mediterranean coast compared to the Atlantic coast and a higher exposure of the Canary archipelago compared to the Balearic Islands—with the most vulnerable regions being Andalusia and Region of Murcia. This research underscores the potential of the EGMS for conducting both preliminary population exposure analyses and preventive risk assessments to mitigate road and building damage., This work has been funded by the “Plan de Recuperación, Transformación y Resiliencia - Financiado por la Unión Europea – NextGenerationEU” programme in the framework of the “Estudio integral de los Riesgos Geológicos ligados al Cambio Climático en España (Ref. 38980)” contract and the “C17.i7.CSIC – CLI 2021-00-000: Cambio climático e impacto en las reservas de agua, los riesgos geológicos y el patrimonio natural” project. In addition, it has been partially funded by: the “RISKCOAST” project (Ref. SOE3/P4/E0868), funded by the IV INTERREG SUDOE program; the “EGMS RASTOOL: European ground motion risk assessment tool” project (Grant Agreement No. 101048474), funded by the Directorate-General for European Civil Protection and Humanitarian Aid Operations; and the Spanish Grant SARAI (PID2020-116540RB-C21), funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Soil Management Effects on Grapevine Water Uptake Depth in a Mediterranean Vineyard

  • Ruiz, Itxaso
  • Schwendenmann, Luitgard
  • Barbeta, Adrià
  • Lehmann, Marco M.
  • Parmo, Roberto
  • Aizpurua, Ana
In Mediterranean vineyards, soils are often managed with tillage or herbicides to limit weed growth and competition for resources. However, with rising concerns about water scarcity and climate change, cover crops are being reconsidered as sustainable alternatives to conserve soil moisture and support adaptation through better soil structure and biodiversity. Although they are often reported to decrease yields, this is not always the case, and the magnitude and timing of their competition for resources with vines are still not well understood. To address this gap, we examined vine and cover crop water uptake depth during veraison in August in a vineyard from Rioja Alavesa, Spain. We compared tillage (control treatment) with spontaneous cover crop. Using the isotopic composition of plant and soil water (δ18O and δ2H) and Bayesian mixing models, we found that the cover crop relied on water from the upper soil (100% from 0 to 30 cm), while vines under cover crop accessed water from shallow (~48% from 0 to 30 cm) and deeper soil layers (~52% from 30 to 100 cm). Despite cover crops and vines competing for water in the upper soil, the vine's ability to access water from both shallow and deeper soil horizons helped maintain its water status during veraison. Vines under tillage relied predominantly on water in the deeper soil (~73% from 30 to 100 cm). These results indicate that soil management strongly influences vine water uptake patterns. In our vineyard, the spontaneous summer cover crop did not compromise vine water availability during veraison., We would like to thank winegrowers Eva and Luis, from Maisulan Vineyard, for their valuable collaboration and commitment to sustainable management. The authors acknowledge the INTERREG Sudoe MONTCLIMA, VITISAD, and VITISAD 2 Projects for providing the field trial on which this study is based. This work was carried out within the framework of the IsWINE Project (no. 101152621), funded by the Marie Skłodowska-Curie Actions (HORIZON-MSCA-2023-PF-01) under the Horizon Europe programme. We also acknowledge Matthias Saurer and Manuela Oettli at WSL Birmensdorf for technical assistance with isotope measurements, and Neiker for providing laboratory facilities and technical support. M.M.L. was supported by the Swiss National Science Foundation (#213367, #229377). Open access publishing facilitated by The University of Auckland, as part of the Wiley - The University of Auckland agreement via the Council of Australasian University Librarians., info:eu-repo/semantics/publishedVersion
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Domestic clustered networks and internationalization of agrifood SMEs

  • Serrano, Raul|||0000-0003-2911-8937
  • Dejo Orícain, Natalia|||0000-0002-7424-6252
  • Ferrer Lorenzo, Juan Ramón|||0000-0003-1902-1613
  • Pinilla, Vicente
  • Abella Garcés, Silvia
  • Maza Rubio, María Teresa|||0000-0002-2266-4655
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Sustainability determinants in the Iberian wine industry

  • García Cortijo, Maria Carmen
  • Ferrer Lorenzo, Juan Ramón|||0000-0003-1902-1613
  • Castillo Valero, Juan Sebastián
  • Gonçalves, Tania
  • Marta Costa, Ana
  • Pinilla, Vicente
  • Rebelo, Joao
  • Serrano, Raul
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Relative intensity noise transfer reduction in raman-assisted BOTDA systems

  • Angulo Vinuesa, Xabier
  • Bacquet, D.
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Szriftgiser, P.
  • González Herráez, Miguel|||0000-0003-2555-2971
Raman-assistance (RA) has been identified as a promising technique to extend the measurement range of Brillouin optical time-domain analysis (BOTDA)-based distributed sensors. Unfortunately, Raman amplification introduces a great amount of relative intensity noise (RIN) to the detected low-frequency probe wave. This RIN transfer problem has been widely identified as a major limitation in RA-BOTDA. In vector BOTDA (VBOTDA), the detected signal is transferred to a high-frequency carrier where the Raman RIN transfer turns out to be much less harmful. In addition, a VBOTDA can also provide information about the phase-shift induced by the local stimulated Brillouin scattering gain curve, paving the way for dynamic measurements. In this letter, we demonstrate, for the first time to our knowledge, the RA in a VBOTDA obtaining gain and phase measurements. Our results show a significant reduction of the RIN transfer effect in RA-VBOTDA compared with standard RA-BOTDA, making this type of scheme particularly interesting for long-range and dynamic distributed sensing., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Modulation instability-induced fading in phase-sensitive optical time-domain reflectometry

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Salgado, P.
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
Phase-sensitive optical time-domain reflectometry (φOTDR) is a simple and effective tool allowing the distributed monitoring of vibrations along single-mode fibers. We show in this Letter that modulation instability (MI) can induce a position-dependent signal fading in long-range φOTDR over conventional optical fibers. This fading leads to a complete masking of the interference signal recorded at certain positions and therefore to a sensitivity loss at these positions. We illustrate this effect both theoretically and experimentally. While this effect is detrimental in the context of distributed vibration analysis using φOTDR, we also believe that the technique provides a clear and insightful way to evidence the Fermi-Pasta-Ulam recurrence associated with the MI process., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Fiber laser sensor system based on a random mirror and a compound ring resonator for displacement measurements

  • Rota Rodrigo, Sergio
  • González Herráez, Miguel|||0000-0003-2555-2971
  • López Amo, M.
24th International Conference on Optical Fibre Sensors (OFS 24), Curitiba, Brazil, Sept. 28-Oct. 2, 2015., In this work, we present a random laser sensor system for increasing simultaneously the sensitivity and interrogation stability of a fiber-optic displacement sensor. The system is based on a random distributed fiber laser modulated by a double-coupler ring resonator within which is placed the sensor. This allows to increase the sensitivity of the sensor and also its interrogation stability. The experimental results show a dynamic range increment (and consequently its sensitivity) of 10dB. Moreover, by using this laser-based interrogation system, the instability is reduced to 0.04 dB. In addition, wavelength filtering elements are not required, simplifying the system., Ministerio de Economía y Competitividad, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Modulation instability-induced visibility fading in phase-sensitive OTDR

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Salgado, P.
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
Phase-sensitive optical time domain reflectometry (ΦOTDR) is a simple and effective tool that allows the distributed monitoring of vibrations along single-mode fibers. In this letter we study the effects of modulation instability (MI) in long-range ΦOTDR over conventional optical fibers. We demonstrate both theoretically and experimentally that MI can induce a position-dependent signal fading which leads to a nearly complete visibility loss in the interference signal recorded at certain positions and therefore to a sensitivity loss at these positions. While this effect is detrimental in the context of distributed vibration analysis using ΦOTDR, we also believe that the technique provides a clear and insightful way to evidence the Fermi-Pasta-Ulam (FPU) recurrence associated to the MI process., Ministerio de Economía y Competitividad, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Rating the limitations and effectiveness of BOTDA range extension techniques

  • Angulo Vinuesa, Xabier
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • López Gil, Alexia Inés
  • Ania Castañón, Juan Diego
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Brillouin Optical Time Domain Analysis (BOTDA) is becoming a consolidated technique in applications requiring highresolution monitoring over extremely long distances. Extension of the measuring range has therefore become one of the main areas of research around BOTDA technology. To increase the sensing range, it is necessary to increase the Signal to Noise Ratio (SNR) of the retrieved signal. This has been achieved so far by applying techniques like pre-amplification before detection, pulse coding or Raman amplification. Here, we analyze these techniques in terms of their performance limits and provide guidelines that determine which is the best configuration to overcome current range limitations., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Unexpected non-local effects in dual-probe-sideband BOTDA

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Angulo Vinuesa, Xabier
  • López Gil, Alexia Inés
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Until now, non-local effects in dual-probe-sideband Brillouin Optical Time Domain Analysis (BOTDA) systems have been considered negligible if the probe power is below the Stimulated Brillouin Scattering (SBS) threshold. In this paper, we show the appearance of non-local effects even below the SBS threshold. The pump pulse experiences a frequencydependent spectral deformation that affects the readout process differently in the gain and loss configurations. The main conclusion of our study is that the measurements in gain configuration are more robust to this non-local effect than the loss configuration. These results are of particular interest for manufacturers of long-range BOTDA systems., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Simple BOTDA temperature sensor based on distributed Brillouin Phase-Shift measurements within a Sagnac interferometer

  • López Gil, Alexia Inés
  • Angulo Vinuesa, Xabier
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
In this work we demonstrate an extremely simple BOTDA scheme capable of delivering distributed Brillouin Phase Shift measurements along an optical fiber. It is based on exploiting the non-reciprocity of the Stimulated Brillouin Scattering effect. This non-reciprocity is easily characterized by means of a suitably tuned Sagnac Interferometer. The technique is advantageous as, in comparison with previous methods, no complex modulation, no sharp filtering and no highbandwidth detection is needed. Theoretical and experimental proofs of the concept are given., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Simple Method for the Elimination of Polarization Noise in BOTDA Using Balanced Detection and Orthogonal Probe Sidebands

  • López Gil, Alexia Inés
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Polarization noise arises in Brillouin optical timedomain analysis due to the strong polarization sensitivity of stimulated Brillouin scattering. To avoid this noise, it turns out to be indispensable to perform some kind of polarization scrambling, either in the pump pulse, the probe signal or both. This is usually achieved using polarization scrambling/switching systems, which, being mechanical, tend to be not as robust as it would be desirable. In this paper, we propose a completely passive system,with no moving parts, to eliminate polarization noise in a BOTDA. It is based on the use of passive depolarization of the pump pulse together with balanced detection among orthogonally polarized Stokes and anti-Stokes bands of the probe signal. The setup requires no alignment readjustment over time and provides a performance similar to a conventional BOTDA using scrambler., Ministerio de Economía y Competitividad, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Signal-to-Noise Ratio Improvement in BOTDA Using Balanced Detection

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • López Gil, Alexia Inés
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Brillouin optical time domain analysis (BOTDA) relies typically on the interaction among two counter-propagating waves: 1) a pulsed pump wave and 2) a modulated probe wave. The modulated probe wave has typically two sidebands, located at ±νB with respect to the pump frequency. Conventional systems detect the time-resolved gain/loss by detecting only the upper/lower wavelength sideband. In this letter, we show that BOTDA can strongly benefit from the use of balanced detection among the two sidebands. In particular, the detected signal can be doubled while the noise only grows by a factor of (2)1/2, leading to a (2)1/2 signal-to noise ratio (SNR) increase. Moreover, any common-mode noise in the probe signal path (e.g., master laser noise, modulator drifts, and so forth) is eliminated, rendering the system more robust. We validate the principle by experimental results that highlight the benefits of the technique in terms of the SNR., Comunidad de Madrid, Ministerio de Ciencia e Innovación, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Simple method for the elimination of polarization noise in BOTDA using balanced detection of orthogonally polarized Stokes and anti-Stokes probe sidebands

  • López Gil, Alexia Inés
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
23rd International Conference on Optical Fiber Sensors (OFS23), Santander (Cantabria), Spain, 2-6 June, 2014., Given the strong polarization sensitivity of Stimulated Brillouin Scattering (SBS), in Brillouin Optical Time Domain Analysis (BOTDA) it turns out to be indispensable to perform some kind of polarization scrambling, either in the pump pulse, or the probe signal (or both). This is usually accomplished using polarization scrambling/switching systems, which, being mechanical, tend to be not as robust as it would be desirable. In this paper we propose a completely passive system, with no moving parts, to perform the polarization scrambling in a BOTDA. It is based on the use of balanced detection among the orthogonally polarized Stokes and anti-Stokes bands of the probe signal. The setup requires no alignment and provides a performance similar to a conventional BOTDA sensor, European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Reaching the ultimate performance limit given by non-local effects in BOTDA sensors

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Yang, Z.
  • Soto Hernández, Marcelo Alfonso
  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
24th International Conference on Optical Fibre Sensors, 96343Y, Curitiba, Brazil, September 28, 2015., Non-local effects have been traditionally identified as one of the most limiting factors of the performance of Brillouin optical time-domain analyzers. These phenomena, directly linked with the energy gained/lost by the pump pulse, limit the probe power and ultimately the SNR of the system. Several solutions have been proposed, although none offers the possibility to increase the probe power until its limit, the onset of amplified spontaneous Brillouin scattering. In this work, we propose a technique that avoids non-local effects and permits to set the probe power at its maximum, reaching a 100 km sensing distance with 2 meter resolution., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Simultaneous gain and phase profile determination on an interferometric BOTDA

  • Angulo Vinuesa, Xabier
  • López Gil, Alexia Inés
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Cruz, J.L.
  • Andrés, M.V.
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
24th International Conference on Optical Fibre Sensors, 96343Y, Curitiba, Brazil, September 28, 2015., Up to now, complex (phase and intensity) measurements in Brillouin Optical Time-Domain Analysis (BOTDA) systems required complex phase modulation methods and high-bandwidth (multi-GHz) detection. In this work, we propose a novel technique that is able to retrieve simultaneously both gain/loss and phase characteristics of the Brillouin interaction by just introducing a Sagnac Interferometer (SI) 011 a standard BOTDA sensing scheme. The technique is described analytically and demonstrated experimentally. With this technique, a reliability increase is produced since redundant measurements can be performed., European Commission, Ministerio de Economía y Competitividad, Universidad de Alcalá, Comunidad de Madrid, Generalitat Valenciana
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Raman-assisted Vector Brillouin Optical Time Domain Analysis

  • Angulo Vinuesa, Xabier
  • Bacquet, D.
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Szriftgiser, P.
  • González Herráez, Miguel|||0000-0003-2555-2971
Raman-assistance (RA) has become a promising technique to enhance the sensing range of standard Brillouin Optical Time Domain Analysis (BOTDA) fiber sensors due to its ability to amplify in a distributed way all the interacting signals within the fiber. Unfortunately, Raman amplification introduces a great amount of Relative Intensity Noise (RIN) to the detected low-frequency probe wave. This RIN transfer problem has been widely identified as a major limitation in RABOTDA. In Vector Brillouin Optical Time Domain Analysis (VBOTDA) the detected signal is transferred to a highfrequency carrier where the Raman RIN transfer turns out to be much less harmful. In this work we demonstrate, for the first time to our knowledge, Raman-assistance in a VBOTDA. Our results show significant reduction of the RIN transfer effect in RA-VBOTDA compared to standard RA-BOTDA, making this type of scheme particularly interesting for long range distributed sensing., European Commission, Ministerio de Economía y Competividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Compound lasing fiber optic ring resonators for sensing

  • Rota Rodrigo, Sergio
  • González Herráez, Miguel|||0000-0003-2555-2971
  • López Amo, M.
In this work, we present a new method for increasing simultaneously the sensitivity and interrogation stability of fiberoptic intensity sensors. The configuration is based on a double-coupler ring resonator. On one side, the attenuation sensitivity of the sensor is enhanced by placing it inside a ring resonator. On the other side, the stability of the interrogation method is rendered close to perfect by creating an external lasing ring resonator with matched spectral response. The resulting lasers allow the stable interrogation of the sensors with an impressive sensitivity enhancement. In our experiments, the dynamic range of the intensity sensor (and consequently its sensitivity) is increased 15 dB by using this laser-based interrogation system. Simultaneously, the instability of the system is reduced to ±0.05 dB. In comparison with systems based on external interrogation, our method is <100 times more stable and also simpler, as no wavelength tunable elements are required., Ministerio de Ciencia e Innovación, Ministerio de Economía y Competitividad, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Exploiting nonreciprocity in BOTDA systems

  • López Gil, Alexia Inés
  • Angulo Vinuesa, Xabier
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
In this Letter, we present and demonstrate a novel technique for distributed measurements in Brillouin optical time-domain analysis based on the use of the nonlinear phase-shift induced by stimulated Brillouin scattering. Employing a Sagnac interferometer (SI), the position-resolved Brillouin phase-shift spectrum (BPS) along the fiber can be obtained, benefiting from the sensitivity to nonreciprocal phase-shifts of the SI scheme. This proposal simplifies the existing methods to retrieve the BPS distribution along an optical fiber since phase modulation, filtering, and high-bandwidth detectors are not required. The fundamentals of the technique are described theoretically and validated through numerical simulations and experimental measurements., European Commission, Ministerio de Economía y Competitivdad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Distributed phase birefringence measurements based on polarization correlation in phase-sensitive optical time-domain reflectometers

  • Soto Hernández, Marcelo Alfonso
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Thévenaz, Luc
In this paper a technique to measure the distributed birefringence profile along optical fibers is proposed and experimentally validated. The method is based on the spectral correlation between two sets of orthogonally-polarized measurements acquired using a phase-sensitive optical time-domain reflectometer (φOTDR). The correlation between the two measured spectra gives a resonance (correlation) peak at a frequency detuning that is proportional to the local refractive index difference between the two orthogonal polarization axes of the fiber. In this way the method enables local phase birefringence measurements at any position along optical fibers, so that any longitudinal fluctuation can be precisely evaluated with metric spatial resolution. The method has been experimentally validated by measuring fibers with low and high birefringence, such as standard single-mode fibers as well as conventional polarizationmaintaining fibers. The technique has potential applications in the characterization of optical fibers for telecommunications as well as in distributed optical fiber sensing., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Limits of BOTDA Range Extension Techniques

  • Angulo Vinuesa, Xabier
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • López Gil, Alexia Inés
  • Ania Castañón, Juan Diego
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Brillouin-based temperature and strain sensors have attracted great attention of both the academic and industrial sectors in the past few decades due to their ability to perform distributed measurements. Particularly, Brillouin Optical Time Domain Analysis (BOTDA) systems have been applied in many different scenarios, proving particularly useful in those requiring especially wide coverage ranging extremely long distances, such as in civil structure monitoring, energy transportation or environmental applications. The extension of the measuring range in these sensors has therefore become one of the main areas of research and development around BOTDA. To do so, it is necessary to increase the Signal to Noise Ratio (SNR) of the retrieved signal. So far, several techniques have been applied in order to achieve this goal, such as pre-amplification before detection, pulse coding or Raman amplification. Here, we analyze these techniques in terms of their performance limits and provide guidelines that can assist in finding out which is the best configuration to break current range limitations. Our analysis is based on physical arguments as well as current literature results., European Commission, Ministerio de Economía y Competitividad, Universidad de Alcalá, Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Strong Cancellation of RIN Transfer in a Raman-Assisted BOTDA Using Balanced Detection

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • López Gil, Alexia Inés
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Raman assistance is one of the most interesting routes toward extending the range of Brillouin optical timedomain analysis (BOTDA) systems. Unfortunately, the use of Raman amplification normally entails an important relative intensity noise (RIN) transfer toward the probe wave, which severely limits this approach. In this letter, we show that the RIN transfer problem can be effectively avoided using a slightly modified scheme comprising a dual-sideband modulated probe and balanced detection. Our measurements clearly indicate a nearly complete cancellation of the RIN noise in the detected trace signal. The use of balanced detection in our Raman-assisted BOTDA setup implies a fivefold increase in figure of merit compared with the same setup using conventional detection., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Distributed vibration sensing over 125 km with enhanced SNR using ΦOTDR over a URFL cavity

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Ania Castañón, Juan Diego
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
We describe the use of a phase-sensitive optical time domain reflectometer (ΦOTDR) over an ultra-long Raman fiber laser cavity allowing fully distributed detection of vibrations over 125 km. Compared to a first-order Raman-assisted ΦOTDR, this scheme shows an enhanced signal-to-noise ratio (SNR). This is due to the fact that the relative intensity noise introduced by the Raman amplification is mostly transferred to a lower frequency range, where the balanced detection implemented in the setup provides better suppression of the common-mode noise. The sensor was able to measure vibrations of up to 380 Hz (limit set by the time of flight of light pulses) in a distance of 125 km with a resolution of 10 m and an average SNR of 8 dB with no postprocessing. This implies a >3 dB improvement in SNR over a first-order Raman-assisted setup with similar characteristics, Ministerio de Economía y Competitividad, Ministerio de Ciencia e Innovación, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Phase-sensitive optical time domain reflectometer assisted by first-order raman amplification for distributed vibration sensing over >100 km

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Filograno, M. L.
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
In this study, the authors present an experimental and theoretical description of the use of first order Raman amplification to improve the performance of a Phase-sensitive optical time domain reflectometer (φ OTDR) when used for vibration measurements over very long distances. A special emphasis is given to the noise which is carefully characterized and minimized along the setup. A semiconductor optical amplifier and an optical switch are used to greatly decrease the intra-band coherent noise of the setup and balanced detection is used to minimize the effects of RIN transferred from the Raman pumps. The sensor was able to detect vibrations of up to 250 Hz (close to the limits set by the time of flight of light pulses) with a resolution of 10 m in a range of 125 km. To achieve the above performance, no post-processing was required in the φOTDR signal. The evolution of the φOTDR signal along the fiber is also shown to have a good agreement with the theoretical model., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Long-range static and dynamic distributed sensing

  • González Herráez, Miguel|||0000-0003-2555-2971
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • López Gil, Alexia Inés
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Angulo Vinuesa, Xabier
  • Corredera Guillén, Pedro
In the past few decades, Brillouin-based distributed temperature and strain sensors have attracted the attention of both the academic and industrial sectors. In particular, B-OTDA systems have been lately a trendy study area due to their numerous and well proofed applications, such as in monitoring large civil structures, energy transportation or environmental applications. One of the main areas of research in B-OTDA sensors focuses on the extension of the measuring range. To do so, it becomes necessary to increase the signal to noise ratio (SNR) of the sensor, in particular considering the reduced signal contrast at the far end of the fiber. Several techniques have been applied in order to achieve this goal, such as Raman amplification and pulse coding. Here, we review some of these techniques (particularly Raman amplification) and their application for range extension of these sensors beyond the 100 km range. In addition, we discuss routes to perform dynamic measurements over such ultra-long spans, European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Fiber optic sensing system for temperature and gas monitoring in coal waste pile combustion environments

  • Viveiros, D.
  • Ribeiro, J.
  • Ferreira, J.
  • López-Aldaba, A.
  • Pinto, A.M.R.
  • Pérez Herrera, Rosa Ana
  • Díaz, S.
  • López Gil, Alexia Inés
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Esteban Martinez, Óscar|||0000-0002-2824-6593
  • Martín López, Sonia|||0000-0001-5203-6206
  • Auguste, J.-L.
  • Jamier, R.
  • Rougier, S.
  • Silva, S.O.
  • Frazão, O.
  • Santos, J.L.
  • Flores, D.
  • Roy, P.
  • González Herráez, Miguel|||0000-0003-2555-2971
  • López Amo, M.
  • Baptista, J.M.
It is presented an optical fiber sensing system projected to operate in the demanding conditions associated with coal waste piles in combustion. Distributed temperature measurement and spot gas sensing are requirements for such a system. A field prototype has been installed and is continuously gathering data, which will input a geological model of the coal waste piles in combustion aiming to understand their dynamics and evolution. Results are presented on distributed temperature and ammonia measurement, being noticed any significant methane emission in the short time period considered. Carbon dioxide is also a targeted gas for measurement, with validated results available soon. The assessment of this technology as an effective and reliable tool to address the problem of monitoring coal waste piles in combustion opens the possibility of its widespread application in view of the worldwide presence of coal related fires, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

High visibility phase-sensitive optical time domain reflectometer for distributed sensing of ultrasonic waves

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Filograno, M. L.
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
5th European Workshop on Optical Fibre Sensors, Krakow, Poland, (5th EWOFS'2013) 19-22 May, 2013., In structural health monitoring, the propagation of ultrasonic waves along a structure can reveal interesting data relevant to the integrity of the whole structure. The availability of a system for distributed sensing of ultrasonic waves could, in some cases (e.g. pipelines) provide extremely valuable information to civil engineers. Phase-sensitive optical time domain reflectometry (ΦOTDR) is a simple and effective tool allowing the distributed monitoring of vibrations along single-mode fibers. Up to now, ΦOTDRs have been used mostly for the measurement of sub-kHz vibrations. In this work, the authors present an experimental characterization of a high-visibility ΦOTDR and its performance when used for ultrasonic vibration measurements. The sensor was able to measure vibrations of up to 39.5 kHz with a resolution of 5 m over a range which could go up to 1.25 km. This is the first time to our knowledge that a ΦOTDR is demonstrated for distributed measurement of ultrasonic waves., Ministerio de Economía y Competitividad, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Early detection of pipeline integrity threats using a SmarT Fiber- OPtic surveillance system: The PIT-STOP project

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Piote, D.
  • Tejedor Noguerales, Javier
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Pastor Graells, Juan
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • De Smet, F.
  • Postvoll, W.
  • Ahlen, C.H.
  • González Herráez, Miguel|||0000-0003-2555-2971
24th International Conference on Optical Fibre Sensors, Curitiba, Brazil, September 28, 2015., The preliminary results of a surveillance system set up for real time monitoring activities along a pipeline and analyzing for possible threats are presented. The system consists of a phi-OTDR based sensor used to monitor vibrations along an optical fiber combined with a pattern recognition system that classifies the recorded signals. The acoustic traces generated by the activities of different machines at various locations along a pipeline were recorded in the field. The signals, corresponding to machinery activities, were clearly distinguished from background noise. A threat classification rate of 68.11% with 55.55% false alarms was obtained., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Coherent noise reduction in high visibility phase-sensitive optical time domain reflectometer for distributed sensing of ultrasonic waves

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Filograno, M. L.
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
Phase-sensitive optical time domain reflectometry (\phi \hbox{OTDR}) is a simple and effective tool allowing the distributed monitoring of vibrations along single-mode fibers. Up to now, \phi {\rm OTDRs} have been used mostly for the measurement of sub-kHz vibrations, normally in the context of intrusion sensing. In this paper, the authors present an experimental and theoretical description of a high-visibility \phi {\rm OTDR} and its performance when used for ultrasonic vibration measurements. The use of a semiconductor optical amplifier in the setup allows to suppress coherent noise and also to improve the spectral response of the pump pulses. These two advantages greatly decrease the detected intra-band noise thus allowing frequency measurements in the limits set by the time of flight of the light pulses while maintaining the simplicity of the scheme, as no post-processing, extremely high coherence lasers or coherent detection methods are required. The sensor was able to measure vibrations of up to 39.5 kHz with a resolution of 5 m over a range which could go up to 1.25 km. This is the first time to our knowledge that a fully distributed measurement of ultrasonic waves was achieved. The statistical behavior of the system was also described theoretically and characterized experimentally, European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Distributed measurement of vibrations in a ramified fiber structure using phase sensitive optical time domain reflectometry and wavelength routing concepts

  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
We show the possibility of fully distributed measurement of vibrations in a complex fiber topology using phase-sensitive optical time-domain reflectometry (ΦOTDR) and wavelength routing, allowing monitoring of complex structures with ramifications., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Monitoring of coal waste piles with fiber optic sensing technology

  • Viveiros, D.
  • Ribeiro, J.
  • Pinto, A.M.R.
  • Pérez Herrera, Rosa Ana
  • Díaz, S.
  • López Gil, Alexia Inés
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Esteban Martinez, Óscar|||0000-0002-2824-6593
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Baierl, H.
  • Auguste, J.-L.
  • Jamier, R.
  • Rougier, S.
  • Santos, J.L.
  • Flores, D.
  • Roy, P.
  • González Herráez, Miguel|||0000-0003-2555-2971
  • López-Amo, M.
  • Baptista, J.M.
Coal has been for centuries a central energy source to fulfill industrial and domestic needs. Its large scale extraction produced huge amount of debris that were piled in the neighboring of the mines, quite often going into combustion triggered by events like forest fires or lightning. When in this state it can continue for years, releasing substantial emissions of toxic and greenhouse gases with recognized impact in the environment and, more serious in the short term, in the life quality of the populations located nearby. Continuous monitoring of combustion temperature and emission levels of certain gases opens the possibility to plan corrective actions to minimize their negative impact. Optical fiber technology is well-suited to this purpose and here it is described the main attributes of a fiber optic sensing system projected to gather data on distributed temperature and gas emission in these harsh environments., European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Comparison of the use of first and second-order Raman amplification to assist a phase-sensitive optical time domain reflectometer in distributed vibration sensing over 125 km

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Filograno, M. L.
  • Corredera Guillén, Pedro
  • Frazão, O.
  • González Herráez, Miguel|||0000-0003-2555-2971
We report on the use of second-order Raman amplification to assist a phase-sensitive optical time domain reflectometer ( φOTDR ) used for vibration measurements over very long distances. The sensor was able to measure vibrations of up to 380 Hz (limit set by the time of flight of light pulses) in a distance of 125 km with a resolution of 10 m and no postprocessing. Balanced detection is used to reduce the relative intensity noise. A comparison with a sensor using first-order Raman amplification under similar conditions is presented and a clear improvement of performance is demonstrated., Ministerio de Economía y Competitividad, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Contribución de congreso (ConferenceOutput)

Fiber Optic Sensing System for Monitoring of Coal Waste Piles in Combustion

  • Viveiros, D.
  • Ribeiro, J.
  • Carvalho, J.P.
  • Ferreira, J.
  • Pinto, A.M.R.
  • Pérez Herrera, Rosa Ana
  • Díaz, S.
  • López Gil, Alexia Inés
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Esteban Martinez, Óscar|||0000-0002-2824-6593
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Baierl, H.
  • Auguste, J.-L.
  • Rougier, S.
  • Santos, J.L.
  • Flores, D.
  • Roy, P.
  • González Herráez, Miguel|||0000-0003-2555-2971
  • López-Amo, M.
  • Baptista, J.M.
24th International Conference on Optical Fibre Sensors (OFS-24), Curitiba, Brazil, September 28, 2015 - October 2, 2015., The combustion of coal wastes resulting from mining is of particular environmental concern and therefore the importance of the proper management involving real-time assessment of their status and identification of probable evolution scenarios is recognized. Continuous monitoring of combustion temperature and emission levels of certain gases opens the possibility to plan corrective actions to minimize their negative impact in the surroundings. Optical fiber technology is well-suited to this purpose and in this work it is described the main attributes of a fiber optic sensing system projected to gather data on distributed temperature and gas emission in these harsh environments., European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Non-local effects in dual-probe-sideband Brillouin optical time domain analysis

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Angulo Vinuesa, Xabier
  • López Gil, Alexia Inés
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
According to recent models, non-local effects in dual-probesideband Brillouin Optical Time Domain Analysis (BOTDA) systems should be essentially negligible whenever the probe power is below the Stimulated Brillouin Scattering (SBS) threshold. This paper shows that actually there appear non-local effects in this type of systems before the SBS threshold. To explain these effects it is necessary to take into account a full spectral description of the SBS process. The pump pulse experiences a frequency-dependent spectral deformation that affects the readout process differently in the gain and loss configurations. This paper provides a simple analytical model of this phenomenon, which is validated against compelling experimental data, showing good agreement. The main conclusion of our study is that the measurements in gain configuration are more robust to this non-local effect than the loss configuration. Experimental and theoretical results show that, for a total probe wave power of ~1 mW (500 μW on each sideband), there is an up-shifting of ~1 MHz in the Brillouin Frequency Shift (BFS) retrieved from the Brillouin Loss Spectrum, whereas the BFS extracted from the measured Brillouin Gain Spectrum is up-shifted only ~0.6 MHz. These results are of particular interest for manufacturers of longrange BOTDA systems., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá