Skip to main content

DISEÑO DE ANTENAS MULTIHAZ DE ALTA GANANCIA PARA LOS SISTEMAS DE COMUNICACIONES DE NUEVA GENERACION

TEC2016-78028-C3-3-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An Augmented Regularized Combined Source Integral Equation for Nonconforming Meshes

  • Vico Bondía, Felipe|||0000-0003-1292-3657
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Greengard, Leslie
[EN] We present a new version of the regularized combined source integral equation (CSIE-AR) for the solution of electromagnetic scattering problems in the presence of perfectly conducting bodies. The integral equation is of the second kind and has no spurious resonances. It is well conditioned at all frequencies for simply connected geometries. Reconstruction of the magnetic field, however, is subject to catastrophic cancelation due to the need for computing a scalar potential from magnetic currents. Here, we show that by solving an auxiliary (scalar) integral equation, we can avoid this form of low-frequency breakdown. The auxiliary scalar equation is used to solve a Neumann-type boundary value problem using data corresponding to the normal component of the magnetic field. This scalar equation is also of the second kind, nonresonant, and well conditioned at all frequencies. A principal advantage of our approach, by contrast with the hypersingular electric field integral equation, the combined field integral equation, or CSIE formulations, is that the standard loop-star and related basis function constructions are not needed, and preconditioners are not required. This permits an easy coupling to fast algorithms such as the fast multipole method. Furthermore, the formalism is compatible with nonconformal mesh discretization and works well with singular (sharp) boundaries., This work was supported in part by the Spanish Ministry of Science and Innovation under Project TEC2016-78028-C3-3-P and in part by the Office of the Assistant Secretary of Defense for Research and Engineering and AFOSR through the NSSEFF Program under Award FA9550-10-1-0180.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Numerical Study of the Coupling of Sub-Terahertz Radiation to n-Channel Strained-Silicon MODFETs

  • Calvo-Gallego, Jaime
  • Delgado-Notario, Juan A.
  • Velázquez-Pérez, Jesús E.
  • Fobelets, Kristel
  • El Moussaouy, Abdelaziz
  • Meziani, Yahya M.
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This paper reports on a study of the response of a T-gate strained-Si MODFETs (modulation-doped field-effect transistor) under continuous-wave sub-THz excitation. The sub-THz response was measured using a two-tones solid-state source at 0.15 and 0.30 THz. The device response in the photovoltaic mode was non-resonant, in agreement with the Dyakonov and Shur model for plasma waves detectors. The maximum of the photoresponse was clearly higher under THz illumination at 0.15 THz than at 0.3 THz. A numerical study was conducted using three-dimensional (3D) electromagnetic simulations to delve into the coupling of THz radiation to the channel of the transistor. 3D simulations solving the Maxwell equations using a time-domain solver were performed. Simulations considering the full transistor structure, but without taking into account the bonding wires used to contact the transistor pads in experiments, showed an irrelevant role of the gate length in the coupling of the radiation to the device channel. Simulations, in contradiction with measurements, pointed to a better response at 0.3 THz than under 0.15 THz excitation in terms of the normalized electric field inside the channel. When including four 0.25 mm long bonding wires connected to the contact pads on the transistor, the normalized internal electric field induced along the transistor channel by the 0.15 THz beam was increased in 25 dB, revealing, therefore, the important role played by the bonding wires at this frequency. As a result, the more intense response of the transistor at 0.15 THz than at 0.3 THz experimentally found, must be attributed to the bonding wires., This research was funded by the Ministerio de Ciencia, Investigacion y Universidades of Spain (Spanish Ministry of Science, Innovation, and Universities) and FEDER (ERDF: European Regional Development Fund) under the Research Grants numbers RTI2018-097180-B-100, PID2019-107885GB-C3-2 and TEC2016-78028-C3-3-P and FEDER/Junta de Castilla y Leon Research Grant numbers SA256P18 and SA121P20. Also by Conselleria d'Educacio, lnvestigacio, Cultura i Esport, Generalitat Valenciana (Spain) through the grant AIC0/2019/018. The APC was funded by Universidad de Salamanca.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evanescent-Mode Ridge-Waveguide Radiating Filters for Space Applications

  • Sánchez-Escuderos, Daniel
  • Tosso, Giovanni
  • Angeletti, P.
  • GUGLIELMI, MARCO
  • Ruiz-Garnica, Jesús|||0000-0002-2361-2806
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This paper describes a new family of all-metallic radiators based on below-cutoff apertures fed by evanescentmode ridge waveguide filters. The pass band of the filters and the polarization of the apertures are configured to radiate orthogonal signals at different center frequencies. The simultaneous operation of these radiators in an array configuration results in interleaved apertures producing overlapped fields. This strategy reduces the volume and weight of the antenna system, which is a specially appealing characteristic in satellite antennas. Each isolated evanescent-mode filter ends in a small-size aperture and is designed following a novel synthesis procedure. Next, the radiating elements are combined, and the resulting array is analyzed as a multiplexer from the input ports to the freespace region thus accounting for all mutual couplings between different apertures. To validate the theoretical formulations, a prototype has also been manufactured. The results obtained show very good agreement between simulation and measurements in terms of reflection coefficient, side-lobe level and realized gain, thereby fully validating the new family of radiating arrays., This work was supported by the Spanish Ministry of Economics and Competitiveness under Project TEC2016-79700-C2-1-R, Project TEC2016-78028-C3-3-P, Project TEC2013-47037-C5-1-R, and Project TEC2016-75934-C4-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the Front and Back Illumination on Sub-Terahertz Detection Using n-Channel Strained-Silicon MODFETs

  • Delgado-Notario, Juan A.
  • Calvo-Gallego, Jaime
  • Velázquez-Pérez, Jesús E.
  • Fobelets, Kristel
  • Meziani, Yahya M.
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] Plasma waves in semiconductor gated 2-D systems can be used to efficiently detect Terahertz (THz) electromagnetic radiation. This work reports on the response of a strained-Si Modulation-doped Field-Effect Transistor (MODFET) under front and back sub-THz illumination. The response of the MODFET has been characterized using a two-tones solid-state continuous wave source at 0.15 and 0.30 THz. The DC drain-to-source voltage of 500-nm gate length transistors transducing the sub-THz radiation (photovoltaic mode) exhibited a non-resonant response in agreement with literature results. Two configurations of the illumination were investigated: (i) front side illumination in which the transistor was shined on its top side, and (ii) back illumination side where the device received the sub-THz radiation on its bottom side, i.e., on the Si substrate. Under excitation at 0.15 THz clear evidence of the coupling of terahertz radiation by the bonding wires was found, this coupling leads to a stronger response under front illumination than under back illumination. When the radiation is shifted to 0.3 THz, as a result of a lesser efficient coupling of the EM radiation through the bonding wires, the response under front illumination was considerably weakened while it was strengthened under back illumination. Electromagnetic simulations explained this behavior as the magnitude of the induced electric field in the channel of the MODFET was considerably stronger under back illumination., This research was funded by the Ministerio de Ciencia, Investigacion y Universidades of Spain andFEDER (ERDF: European Regional Development Fund) under the Research Grants numbers RTI2018-097180-B-100 and TEC2016-78028-C3-3-P and FEDER/Junta de Castilla y Leon Research Grant number SA256P18. Also by Conselleria d'Educacio, lnvestigacio, Cultura i Esport, Generalitat Valenciana (Spain) through the grant AIC0/2019/018. The APC received no external funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dual-polarized planar lens antenna designed with a quad-ridged frequency selective surface

  • Moy-Li, Hon Ching
  • Sánchez-Escuderos, Daniel
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This letter presents a microwave planar lens illuminated by a radially corrugated horn antenna. The lens is formed by a set of 5x5 multilevel unit cells working as a frequency selective surface. Each layer of the unit cells is formed by a square metallic ring with two sets of orthogonal stubs. The length of each set of stubs controls the transmission phase shift for each polarization, so that the lens can be configured independently for two orthogonal polarizations. The lens presented in this letter makes use of this operation to compensate the phase profile of the radiation pattern generated by the feeder. A prototype, with the lens located at 0.59 lambda from the feeder, has been fabricated. Measured results show a maximum gain above 14.44 dBi within the operating frequency band (12.55-13.10 GHz), and a crosspolar level below -32 dB within the HPBW., Spanish Ministry of Economics and Competitiveness, Grant/Award Number: TEC2016-78028-C3-3-P and TEC2016-79700-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis and Design of a Metamaterial Lens Antenna Using the Theory of Characteristic Modes

  • Santillán-Haro, Daniel Antonio
  • Sánchez-Escuderos, Daniel
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] A new single-layer metamaterial lens antenna aimed to operate at 10 GHz is proposed in this paper. The lens antenna consists of twelve capacitively coupled unit cells distributed along a ring and illuminated by an open-ended circular waveguide with a metallic resonant ring. The theory of characteristic modes is used to analyze the metamaterial lens, in order to provide an insight into the radiation characteristics of the antenna. The proposed antenna has been optimized, obtaining a large bandwidth and a maximum directivity of 12.88 dBi at 10 GHz., This work has been supported by the Spanish Ministry of Economy and Competitiveness (Ministerio de Economia y Competitividad) under the projects TEC2016-79700-C2-1-R and TEC2016-78028-C3-3-P and college scholarship grant of the National University of Chimborazo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design of a Dual-Band Frequency Reconfigurable Patch Antenna Based on Characteristic Modes

  • Mahlaoui, Zakaria
  • Latif, Adnane
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] A frequency reconfigurable patch antenna design based on the characteristic mode analysis is presented. The antenna presents a reconfigurable lower band and a steady band at higher frequencies. A slot is etched on the ground plane of the antenna, where two varactor diodes are placed on each side of the slot in order to tune the lower band. The first resonant frequency shifts down by varying the reverse voltage of the varactor, whereas the second operating frequency keeps stable. The proposed antenna is designed to cover WLAN bands, offering a first band operating at 2GHz and a second band ranging from 5.3GHz to 5.8GHz. A prototype has been fabricated and measurements are provided, which validate the proposed analysis, method, and design procedure., This work has been supported by the Spanish Ministry of Science, Innovation and Universities (Ministerio Ciencia, Innovacion y Universidades) under the project TEC2016-78028-C3-3-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Planar Lens Antenna for High Data Rate Applications

  • Santillan-Haro, Daniel
  • Sánchez-Escuderos, Daniel
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] A low-profile lens antenna formed by 2 metallic rings with strips short-circuiting both rings is presented. The theory of characteristic modes is used to facilitate the design, optimization, and analysis of the structure. Simulations and measurements are presented for the optimized single-layer metallic lens antenna. Measured results show a large operating bandwidth (14.7% relative -14 dB impedance bandwidth) with a maximum directivity above 13.70 dBi and a return loss better than 14 dB, This work has been supported by the Spanish Ministry of Science, Innovation and Universities (Ministerio Ciencia, Innovacion y Universidades) under the projects TEC2016-79700-C2-1-Rand TEC2016-78028-C3-3-P and college scholarship graduate of the National University of Chimborazo
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Responsivity enhancement of a strained silicon field-effect transistor detector at 0.3 THz using the terajet effect

  • Minin, Igor Vladilenovich
  • Minin, Oleg Vladilenovich
  • Salvador-Sánchez, Juan
  • Delgado-Notario, Juan Antonio
  • Calvo-Gallego, Jaime
  • Fobelets, Kristel
  • Velázquez-Pérez, Jesús Enrique
  • Meziani, Yahya Moubarak
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] We report on the enhancement of responsivity by more than one order of magnitude of a silicon-based sub-terahertz detector when a mesoscopic dielectric particle was used to localize incident radiation to a sub-wavelength volume and focus it directly onto the detector. A strained-silicon modulation field-effect transistor was used as a direct detector on an incident terahertz beam at 0.3 THz. A systematic study in which Teflon cubes were placed in front of the detector to focus the terahertz beam was performed. In this study, cubes with different sizes were investigated, and an enhancement of the responsivity up to 11 dB was observed for a cube with an edge length of 3.45 mm (or 3.45 lambda). Electromagnetic simulation results were in good agreement with the experimental ones and demonstrated that the size of the mesoscopic particle plays an important role in focalizing the electric field within an area below the diffraction limit. This approach provides an efficient, uncostly, and easy to implement method to substantially improve the responsivity and noise equivalent power of sub-terahertz detectors., Tomsk Polytechnic University Development Program; Ministerio de Ciencia, Innovacion y Universidades (PID2019-107885GB-C32, RTI2018-097180-B-100, TEC2016-78028-C3-3-P); Junta de Castilla y Leon (SA121P20, SA256P18); Conselleria d'Educacio, Investigacio, Cultura i Esport (AIC0/2019/018); European Regional Development Fund; Fundacja na rzeczNauki Polskiej (CENTERA-IRA MAB/2018/9)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cross polarization in microwave antennas: Case study of a circular waveguide, Polarización cruzada en antenas de microondas: Caso de estudio de una guía de onda circular

  • Santillán-Haro, Daniel Antonio
  • Sánchez-Escuderos, Daniel
  • Navarro-Méndez, Diana Verónica
  • Carrera-Suárez, Luis Fernando
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[ES] Durante la ultima d ¿ ecada, el tema de la polarizaci ¿ on de la antena atrae gran inter ¿ es. ¿ La mejora de la polarizacion cruzada genera una distribuci ¿ on de un campo altamente ¿ simetrico en la apertura de una antena, sin embargo, es dif ¿ ¿¿cil hacer fuentes circulares de baja polarizacion cruzada que operen en un ancho de banda amplio. En este art ¿ ¿¿culo se presenta un caso de estudio para mejorar la polarizacion cruzada de una apertura ¿ circular. Como la gu¿¿a de onda circular tiene una polarizacion cruzada pobre, se han ¿ considerado tres soluciones posibles para mejorar la polarizacion cruzada, que ha sido ¿ presentada en trabajos anteriores. La primera solucion se basa en un disco met ¿ alico ¿ que, despues de un proceso de optimizaci ¿ on, se obtiene un di ¿ ametro externo optimizado ¿ de 90.42 mm. La segunda solucion se basa en un anillo met ¿ alico alrededor de la gu ¿ ¿¿a de onda circular, la dimension optimizada del anillo de di ¿ ametro externo es de 90.42 ¿ mm con un grosor de 1.63 mm. La tercera solucion se basa en dos anillos alrededor de ¿ la gu¿¿a de onda circular, cuyas dimensiones optimizadas son un diametro exterior de ¿ 122.48 mm y un diametro interno de 90.42 mm. El conocimiento obtenido es valioso ¿ para explicar la mejora del nivel de adaptacion de una antena de parche con un anillo ¿ de alrededor a 5.8 GHz, [EN] During the last decade, the subject of antenna polarization attracts great interest. The improve of the cross polarization generates a distribution of a highly symmetric field in the aperture of the antenna, however, it is difficult to make low cross polarization circular sources to operate over a wide bandwidth. In this paper, a study case is presented to improve the cross polarization of a circular aperture. As the circular waveguide has a poor cross polarization, three possible solutions have been considered to improve the cross polarization in previous works. The first solution is based on a metallic disk, which after an optimization process obtains an external diameter of 90.42mm. The second solution is based on a metallic ring around the circular waveguide, the optimized dimension of the external diameter ring is 90.42mm with a thickness of 1.63mm. The third solution is based on two rings around the circular waveguide, which optimized dimensions of the rings are an outer diameter of 122.48mm, and an inner diameter of 90.42mm. This knowledge is valuable to explain the improvement of matching level of a patch antenna with a ring around 5.8 GHz., This work has been supported by the Spanish Ministry of Science, Innovation and Universities (Ministerio de Ciencia, Innovacion y Universidades) under ´ the projects TEC2016-79700-C2-1-R, TEC2016- 78028-C3-3-P and college scholarship graduate of the National University of Chimborazo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design Guidelines for the Excitation of Characteristic Modes in Slotted Planar Structures

  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
  • Sonkki, Marko
  • Mohamed Mohamed-Hicho, Nora
This paper provides some design guidelines for the excitation of broadband slotted planar antennas, addressing key issues such as coupling, symmetries and multiple feeding. The theory of characteristic modes (CMs) is used to identify the collection of current modes that exists on these structures, dealing to a valuable understanding of the radiating mechanisms and allowing a more controlled design process. Modal analysis of a circular aperture cut on a finite square ground plane is presented in order to demonstrate that an optimum choice of the feeding mechanism can be made according to the current distribution of the desired modes. Based on the information yielded by this modal analysis, a capacitive-coupled dual-feed circular aperture antenna is presented. This antenna takes advantage of the symmetries of the characteristic currents by making use of multiple feeding, in order to excite only some particular modes. Usage of commonly-fed and differentially-fed configurations enables an increased control of the excitation of modes in the structure. CM analysis of the antenna including the feeding structures is presented, showing the influence of the feeding lines in the performance of this type of antennas. A prototype of the antenna has been fabricated and measured. Simulated and measured results are presented, being in good agreement., This work was supported by the Spanish Ministry of Economy and Competitiveness under Project TEC2016-78028-C3-3-P and Project GV/2015/065.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Integral Equation Methods for Electrostatics, Acoustics, and Electromagnetics in Smoothly Varying, Anisotropic Media

  • Imbert-Gérard, Lise-Marie
  • Greengard, Leslie
  • Vico Bondía, Felipe|||0000-0003-1292-3657
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] We present a collection of well-conditioned integral equation methods for the solution of electrostatic, acoustic, or electromagnetic scattering problems involving anisotropic, inhomogeneous media. In the electromagnetic case, our approach involves a minor modification of a classical formulation. In the electrostatic or acoustic setting, we introduce a new vector partial differential equation, from which the desired solution is easily obtained. It is the vector equation for which we derive a well-conditioned integral equation. In addition to providing a unified framework for these solvers, we illustrate their performance using iterative solution methods coupled with the FFT-based technique of [F. Vico, L. Greengard, M. Ferrando, J. Comput. Phys., 323 (2016), pp. 191-203] to discretize and apply the relevant integral operators., The work of the authors was partially supported by the Spanish Ministry of Science and Innovation under project TEC2016-78028-C3-3-P and the U.S. Department of Energy under grant DE-FG02-86ER53223.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Low-Profile Radially Corrugated Horn Antenna

  • Moy-Li, Hon Ching
  • Sánchez-Escuderos, Daniel
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This letter proposes a low-profile horn antenna with radial corrugations. The depth and width of the corrugations are suitably chosen to excite the mode HE11 in the corrugated section. This mode spreads uniformly across the whole aperture, thereby maximizing the radiating area and the aperture efficiency. The good polarization purity of mode HE11 provides a good cross-polar level and a low sidelobe level. The structure is fed by a circular waveguide with two matching elements on the feeding plane that minimize the return loss level. A prototype has been fabricated and measured to operate in the Ku band. The prototype, with a height of just 6.9 mm, i.e., 0.3 lambda0, provides a maximum gain above 12.2 dBi and an aperture efficiency better than 72% within the operating frequency band., This work was supported by the Spanish Ministry of Economics and competitiveness under projects TEC2016-79700-C2-1-R and TEC2016-78028-C3-3-P. (Corresponding author: Daniel Sanchez-Escuderos.)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improvement of a Terahertz Detector Performance Using the Terajet Effect in a Mesoscale Dielectric Cube: Proof of Concept

  • Minin, Igor V.
  • Minin, Oleg V.
  • Delgado-Notario, Juan A.
  • Calvo-Gallego, Jaime
  • Velázquez-Pérez, Jesús E.
  • Meziani, Yahya Moubarak
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] Herein, a simple terahertz (THz) receiver that uses subwavelength focusing of the THz beam on the detector area is proposed. As a proof of concept, a THz detection system with an original optical coupling scheme is implemented, where the signal to be detected is coupled to a THz detector through a mesoscale dielectric particle lens. Coherent detection is successfully demonstrated with an enhancement of the detector sensitivity of about 4.3 dB, compared with that of a direct detection system with the slight decreasing (approximate to 1.67 times) of noise equivalent power value. The results show that the proposed method can reduce the size and increase the sensitivity of various THz systems, including imaging, sensing, and ranging, which would enable significant progress in different fields such as physics, medicine, biology, astronomy, security, etc., This work was partially conducted within the framework of the Tomsk Polytechnic University Competitiveness Enhancement Program. This research was supported by the Agencia Estatal de Investigacion (grants TEC2015-65477-R, TEC2016-78028-C3-3-P, and RTI2018-097180-B-100), the Consejeria de Educacion, Junta de Castilla y Leon (SA256P18), including funding by ERDF/FEDER, the Conselleria d'Educacio, lnvestigacio, Cultura i Esport, and Generalitat Valenciana through the grant AIC0/2019/018. J.A.D.N. acknowledges the Japan Society for the Promotion of Science (JSPS) for supporting the author as International Research Fellow.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Designing Slot Antennas in Finite Platforms using Characteristic Modes

  • Mohamed Mohamed-Hicho, Nora
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] In this paper, the application of the Theory of Characteristic Modes for the design of narrow-in-width open slot antennas embedded in finite platforms is investigated. Purely magnetic and electric characteristic modes (CM) of a slot etched in both an infinite and a finite ground plane are analyzed, with the aim to provide a physical understanding of the slot behavior and its interaction with the metallic ground plane. Instead of traditional CM analysis, an alternative approach is proposed, which consists in dividing the design procedure into the separate and complementary analysis of purely magnetic and electric CM. Based on this analysis, some guidelines for the design of open slot antennas are provided, and a simple and compact narrow-in-width wideband open slot antenna is designed. Simulations and measurements are presented for the optimized slot antenna, showing an impedance bandwidth of 47.48% with a very stable radiation pattern., This work was supported by the Spanish Ministry of Economy and Competitiveness under Project TEC2016-78028-C3-3.