Skip to main content

SENSORES FOTONICOS ULTRASENSIBLES BASADOS EN NANORECUBRIMIENTOS

TEC2016-78047-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

An analysis matrix for the assessment of smart city technologies: main results of its application

  • Branchi, Pablo Emilio
  • Fernández Valdivielso, Carlos
  • Matías Maestro, Ignacio
The paper presents the main results of a previously developed methodology to better evaluate new technologies in Smart Cities, using a tool to evaluate different systems and technologies regarding their usefulness, considering each application and how technologies can impact the physical space and natural environment. Technologies have also been evaluated according to how they are used by citizens, who must be the main concern of all urban development. Through a survey conducted among the Smart City Spanish network (RECI) we found that the ICT’s that change our cities everyday must be reviewed, developing an innovative methodology in order to find an analysis matrix to assess and score all the technologies that affect a Smart City strategy. The paper provides the results of this methodology regarding the three main aspects to be considered in urban developments: mobility, energy efficiency, and quality of life after obtaining the final score for every analyzed technology. This methodology fulfills an identified need to study how new technologies could affect urban scenarios before being applied, developing an analysis system to be used by urban planners and policy-makers to decide how best to use them, and this paper tries to show, in a simple way, how they can appreciate the variances between different solutions., The authors would like to acknowledge Spanish Ministry of Economy and Competitiveness for the financial support through TEC2016-78047-R and Government of Navarra (Spain) Research Grants.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Lossy mode resonance sensors based on lateral light incidence in nanocoated planar waveguides

  • Fuentes Lorenzo, Omar
  • Del Villar, Ignacio
  • Corres Sanz, Jesús María
  • Matías Maestro, Ignacio
The deposition of an indium oxide (In2O3) thin film on conventional planar waveguides (a coverslip and a glass slide) allows generating lossy mode resonances (LMR) by lateral incidence of light on the waveguide and by registering the optical spectrum in a spectrometer. This novel sensing system becomes an alternative to optical fibre, the substrate where LMR-based sensors have been developed so far, since it is easier to handle and more robust. An additional advantage is that cost effective waveguides, such as slides or coverslips, can be used in a platform that resembles surface plasmon resonance-based sensors in the Kretschmann configuration but without the need for a coupling prism and with the advantage of being able to generate TE and TM LMR resonances with metallic oxide or polymer thin films. The results are corroborated with simulations, which provide in-depth understanding of the phenomena involved in the sensing system. As a proof-of-concept for the optical platform, two refractometers were developed, one with low sensitivity and for a wide range of refractive indices, and the other with higher sensitivity but for a narrower refractive index range. The sensors presented here open up the path for the development of LMR-based chemical sensors, environmental sensors, biosensors, or even the generation of other optical phenomena with the deposition of multilayer structures, gratings or nanostructures, which is much easier in a planar waveguide than in an optical fibre., The authors would like to acknowledge the partial support to the Spanish Ministry of Economy and Competitiveness TEC2016-78047-R and TEC2016-79367-C2-2-R research funds, the pre-doctoral research grant and the Government of Navarre 2018/PC021-022 OPTISENS research funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Increasing the sensitivity of an optic level sensor with a wavelength and phase sensitive single-mode multimode single-mode (SMS) fiber structure

  • Fuentes Lorenzo, Omar
  • Del Villar, Ignacio
  • Vento Álvarez, José Raúl
  • Socorro Leránoz, Abián Bentor
  • Gallego Martínez, Elieser Ernesto
  • Corres Sanz, Jesús María
  • Matías Maestro, Ignacio
The sensitivity of a liquid level sensor based on a single-mode-multimode-single-mode fiber structure has been increased by hydrofluoric acid etching. The etching process was analyzed and monitored both theoretical and experimentally, which permitted to observe that a sinusoidal spectrum can be obtained for low diameters. As an example, a 2.77 fold sensitivity increase was attained by etching from diameter 125 to 50 μm. Moreover, the sinusoidal shape of the optical spectrum permitted to monitor liquid level changes both in wavelength and phase. The cross sensitivity of the sensor to refractive index and temperature was also studied., This work was supported by the Spanish Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) (TEC2016-78047-R) and by Pinar del Río University.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Oinez Basoa: using school-managed afforested land for soil education in Navarre, Spain, Oinez Basoa: uso de un bosque escolar para la educación en suelos en Navarra, España

  • Virto Quecedo, Íñigo
  • Imbert Rodríguez, Bosco
  • Peralta de Andrés, Francisco Javier
  • De Soto García, Isabel Sonsoles
  • González Tejedor, Iñaki
  • Antón Sobejano, Rodrigo
  • López Goñi, Irene
  • Martínez, Maite
  • Arias, Isabel
  • Enrique Martín, Alberto
El estudio del suelo en la educación secundaria es un tema de debate ya que, a pesar de la creciente preocupación por el suelo en las ciencias ambientales, sigue siendo poco considerado en los planes de estudio y programas oficiales de educación preuniversitaria. En este trabajo presentamos los resultados de un estudio de caso realizado con una clase de 4º grado de educación secundaria obligatoria, donde se utilizó una secuencia didáctica que incluye datos reales obtenidos en una cronosecuencia de reforestación. La repoblación forestal formó parte de las actividades realizadas por la red de escuelas a las que pertenecía la escuela, con el objetivo de mitigar las emisiones de gases de efecto invernadero resultantes de su actividad anual de recaudación de fondos. En un primer paso, se determinaron una serie de indicadores edáficos y de la vegetación en el suelo reforestado, utilizando un enfoque de espacio por tiempo con un suelo cultivado cercano (correspondiente a la situación original del suelo reforestado) y un bosque maduro (similar a la situación objetivo de la reforestación). Se observó que los índices de biodiversidad de plantas, carbono de la biomasa microbiana y C orgánico total, y los de descomposición de la materia orgánica en el suelo reforestado se encontraron en una situación intermedia entre el suelo cultivado y el bosque maduro. En particular, se verificó un secuestro efectivo de C atmosférico a partir de una diferencia de 12,41 ± 1,06 Mg de C orgánico por hectárea en el suelo reforestado en comparación con el control cultivado. Los datos emitidos a partir de este análisis se utilizaron para preparar una actividad de aprendizaje cooperativo de tipo puzzle, que se integró en la secuencia didáctica diseñada para introducir los conceptos de sucesiones ecológicas y el ciclo del carbono. Esta propuesta se centró especialmente en el papel del suelo como omponente del ecosistema y dentro del ciclo del C. El éxito de la implementación de esta secuencia se probó utilizando test de conocimientos previos y finales. Los resultados de estas pruebas mostraron una mejora general (42,8 puntos en la prueba final frente a 23,3 en la prueba inicial) en relación con los conceptos evaluados. Sin embargo, se observaron diferencias en relación a la progresión realizada por los estudiantes, que fue mejor en las preguntas relacionadas con los ecosistemas que en las directamente relacionadas con el suelo como consecuencia del peor conocimiento previo sobre el suelo. A partir de estos resultados, llegamos a la conclusión de que el desarrollo de herramientas educativas que permitan a los estudiantes de secundaria abordar casos reales en las que el suelo se considera un componente clave del ecosistema, puede ser eficaz para avanzar hacia un aprendizaje significativo sobre los suelos y las propiedades del suelo, que parecen no suficientemente entendidos por los alumnos de educación secundaria., The study of soils in secondary education is a topic of debate because it remains little considered in official curricula and programs at pre-university education, despite the increasing concern about soil in environmental studies. In this work, we present the results of a case-study conducted with a class of the 4th grade of compulsory secondary education (10th school year), where a didactic sequence was used that included actual data obtained in an afforestation chronosequence. The afforestation was part of the activities conducted by the network of schools to which the school belonged, with the aim of mitigating greenhouse gas emissions resulting from their annual fund-raising event. In a first step, a series of indicators related to soil and vegetation were determined in the afforested soil using a space-for-time approach with a nearby cultivated soil (corresponding to the original situation of the afforested soil) and a mature forest (similar to the target situation of the afforested land). Plant biodiversity, soil microbial biomass C and total organic C, and organic matter decomposition indicators were determined and observed to be in an intermediate situation in the afforested land between the cultivated soil and the mature forest, seven years after afforestation. In particular, an effective atmospheric C sequestration was verified from a difference of 12.41 ± 1.06 Mg of organic C per hectare in the afforested soil compared to the cultivated control. Data issued from this analysis were used to prepare a collaborative jigsaw activity that was integrated into the didactic sequence designed to introduce the concepts of ecosystem successions and the carbon cycle. This project had a special focus on the role of soil both as a component of the ecosystem and within the carbon cycle. The success of the implementation of this sequence was tested using an initial and final test. The results of these tests showed a general improvement (42.8 points in the final test vs 23.3 in the initial test) in relation to the concepts tested. However, differences were observed in relation to the progression done by the students, which was better for ecosystems than for soil, likely as a consequence of the poor previous knowledge. From those results, we conclude that the development of educational tools that allow secondary school students to address real cases in which the soil is considered as a key component of the ecosystem can be effective in moving towards meaningful learning about soils and soil properties, since these seem still poorly understood by secondary school students., This work was supported by the Program for Research conducted in Public-funded Schools from the Gobierno de Navarra / Nafarroako Gobernua (Department of Education, Call 2018).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A comprehensive review of optical fiber refractometers: toward a standard comparative criterion

  • Urrutia Azcona, Aitor
  • Del Villar, Ignacio
  • Zubiate Orzanco, Pablo
  • Ruiz Zamarreño, Carlos
Thanks to the peculiarities of optical fiber and its ability to be combined with nanotechnology, precise and accurate measurements of the changes in optical properties (i.e., refractive index) of the medium surrounding the fiber are becoming possible with a high degree of performance. Thus, optical fiber sensors (OFSs) are increasingly finding applications in biochemistry and biomedicine. Here, all types of optical fiber refractometers are covered, and they are classified into three main groups: interferometers, grating-based structures, and resonance-based structures (the resonance is induced by coating the optical fiber sensor with a thin film). The performance of these different structures is compared by means of the most common parameters: sensitivity, full width at half minimum or maximum, figure of merit, and quality factor. The aim here is to provide a reliable and easy-to-use tool to compare the performance of the most recent developments on fiber optic refractometers., This work was supported by the Government of Navarra (projects with references 72/2015 and PC021-022) and by the Spanish Agencia Estatal de Investigacion (AEI) and European Regional Development Fund (FEDER)(TEC2016-78047-R)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Sensitivity enhancement experimental demonstration using a low cutoff wavelength SMS modified structure coated with a pH sensitive film

  • Rodríguez Rodríguez, Wenceslao Eduardo
  • Del Villar, Ignacio
  • Ruiz Zamarreño, Carlos
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
  • Rodríguez Rodríguez, Adolfo Josué
  • Domínguez Cruz, René
The multimode interference (MMI) effect in a single mode-multimode-single mode (SMS) can be used fordevelopment of wavelength shift detection based sensors. In this work, the focus is centered on obtainingwavelength shifts with low cutoff single mode fibers, which allows exploring the wavelength range from600 to 1000 nm, where optical sources and detectors are less expensive than at longer wavelengths. Inaddition, the application of a reduction in the fiber diameter of the SMS structure by means of HF etching,combined with the deposition of a thin-film, enables to enhance the sensitivity of the devices at thesame time the objective mentioned before is achieved. In this sense, the effect of the deposition of a pHsensitive thin-film on SMS structures with different diameters allowed attaining a maximum sensitivityof 15 nm per pH unit in the range from pH 4 to pH 6, which improves by a factor of 3 the sensitivity ofSMS sensors without etching operating at longer wavelengths., This work was supported by the Spanish Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) (TEC2016-79367-C2-2-R, TEC2016-78047-R), Government of Navarra PI044 NANOSEN, Government of Navarra PC023-024 BIPOTSENS research grants and the Direction of Internationalization and Academic Collaboration of the Autonomous University of Tamaulipas.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Route towards a label-free optical waveguide sensing platform based on lossy mode resonances

  • Ruiz Zamarreño, Carlos
  • Zubiate Orzanco, Pablo
  • Ozcariz Celaya, Aritz
  • Elosúa Aguado, César
  • Socorro Leránoz, Abián Bentor
  • Urrutia Azcona, Aitor
  • López Torres, Diego
  • Acha Morrás, Nerea de
  • Ascorbe Muruzabal, Joaquín
  • Vitoria Pascual, Ignacio
  • Imas González, José Javier
  • Corres Sanz, Jesús María
  • Díaz Lucas, Silvia
  • Hernáez Sáenz de Zaitigui, Miguel
  • Goicoechea Fernández, Javier
  • Arregui San Martín, Francisco Javier
  • Matías Maestro, Ignacio
  • Del Villar, Ignacio
According to recent market studies of the North American company Allied Market Research, the field of photonic sensors is an emerging strategic field for the following years and it is expected to garner $18 billion by 2021. The integration of micro and nanofabrication technologies in the field of sensors has allowed the development of new technological concepts such as lab-on-a-chip which have achieved extraordinary advances in terms of detection and applicability, for example in the field of biosensors. This continuous development has allowed that equipment consisting of many complex devices that occupied a whole room a few years ago, at present it is possible to handle them in the palm of the hand; that formerly long duration processes are carried out in a matter of milliseconds and that a technology previously dedicated solely to military or scientific uses is available to the vast majority of consumers. The adequate combination of micro and nanostructured coatings with optical fiber sensors has permitted us to develop novel sensing technologies, such as the first experimental demonstration of lossy mode resonances (LMRs) for sensing applications, with more than one hundred citations and related publications in high rank journals and top conferences. In fact, fiber optic LMR-based devices have been proven as devices with one of the highest sensitivity for refractometric applications. Refractive index sensitivity is an indirect and simple indicator of how sensitive the device is to chemical and biological species, topic where this proposal is focused. Consequently, the utilization of these devices for chemical and biosensing applications is a clear opportunity that could open novel and interesting research lines and applications as well as simplify current analytical methodologies. As a result, on the basis of our previous experience with LMR based sensors to attain very high sensitivities, the objective of this paper is presenting the route for the development of label-free optical waveguide sensing platform based on LMRs that enable to explore the limits of this technology for bio-chemosensing applications., This work was supported in part by the Spanish Ministry of Education and Science-FEDER TEC2016- 78047-R, Government of Navarra 0011-1365-2017- 000117 and Public University of Navarra PJUPNA26 research grants as well as the ATTRACT call financed by the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 777222.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A comprehensive review: materials for the fabrication of optical fiber refractometers based on lossy mode resonance

  • Ozcariz Celaya, Aritz
  • Ruiz Zamarreño, Carlos
  • Arregui San Martín, Francisco Javier
Lossy mode resonance based sensors have been extensively studied in recent years. The versatility of the lossy mode resonance phenomenon has led to the development of sensors based on different configurations that make use of a wide range of materials. The coating material is one of the key elements in the performance of a refractometer. This review paper intends to provide a global view of the wide range of coating materials available for the development of lossy mode resonance based refractometers., This research was funded by the Spanish Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) (TEC2016-78047-R), the Public University of Navarra (PJUPNA26), and the Spanish Ministry of Universities (FPU15/05663).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Micro and nanostructured materials for the development of optical fibre sensors

  • Elosúa Aguado, César
  • Arregui San Martín, Francisco Javier
  • Del Villar, Ignacio
  • Ruiz Zamarreño, Carlos
  • Corres Sanz, Jesús María
  • Bariáin Aisa, Cándido
  • Goicoechea Fernández, Javier
  • Hernáez Sáenz de Zaitigui, Miguel
  • Rivero Fuente, Pedro J.
  • Socorro Leránoz, Abián Bentor
  • Urrutia Azcona, Aitor
  • Sánchez Zábal, Pedro
  • Zubiate Orzanco, Pablo
  • López Torres, Diego
  • Acha Morrás, Nerea de
  • Ascorbe Muruzabal, Joaquín
  • Ozcariz Celaya, Aritz
  • Matías Maestro, Ignacio
The measurement of chemical and biomedical parameters can take advantage of the features exclusively offered by optical fibre: passive nature, electromagnetic immunity and chemical stability are some of the most relevant ones. The small dimensions of the fibre generally require that the sensing material be loaded into a supporting matrix whose morphology is adjusted at a nanometric scale. Thanks to the advances in nanotechnology new deposition methods have been developed: they allow reagents from different chemical nature to be embedded into films with a thickness always below a few microns that also show a relevant aspect ratio to ensure a high transduction interface. This review reveals some of the main techniques that are currently been employed to develop this kind of sensors, describing in detail both the resulting supporting matrices as well as the sensing materials used. The main objective is to offer a general view of the state of the art to expose the main challenges and chances that this technology is facing currently., This work was supported by the Spanish State Research Agency (AEI) and European Regional Development Fund (ERDF-FEDER), TEC2016-79367-C2-2-R and TEC2016-78047-R projects.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Fabrication of long period gratings by periodically removing the coating of cladding-etched single mode optical fiber towards optical fiber sensor development

  • Ascorbe Muruzabal, Joaquín
  • Corres Sanz, Jesús María
  • Del Villar, Ignacio
  • Matías Maestro, Ignacio
Here, we present a novel method to fabricate long period gratings using standard single mode optical fibers (SMF). These optical devices were fabricated in a three-step process, which consisted of etching the SMF, then coating it with a thin-film and, the final step, which involved removing sections of the coating periodically by laser ablation. Tin dioxide was chosen as the material for this study and it was sputtered using a pulsed DC sputtering system. Theoretical simulations were performed in order to select the appropriate parameters for the experiments. The responses of two different devices to different external refractive indices was studied, and the maximum sensitivity obtained was 6430 nm/RIU for external refractive indices ranging from 1.37 to 1.39., This work was supported by the Spanish Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) (TEC2016-78047-R and TEC2016-79367-C2-2-R), and by the Government of Navarre through the project with reference 2017/PI044.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Real time measuring system of multiple chemical parameters using microstructured optical fibers based sensors

  • López Aldaba, Aitor
  • López Torres, Diego
  • Elosúa Aguado, César
  • Arregui San Martín, Francisco Javier
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this paper, a multiplexing system for simultaneous interrogation of optical fiber sensors which measure different parameters is presented and validated. The whole system has been tested with 6 different sensing heads with different purposes: one temperature sensing head, two relative humidity sensors and three VOCs leak sensors; all of them based on microstructured optical fibers. The interrogation system uses the FFT technique to isolate each sensor's interference, enabling their simultaneous interrogation. The system interrogates all the sensors at frequencies up to 1 KHz, showing a good performance of each measurement without crosstalk between sensors. The developed system is independent of the sensors' purpose or of the multiplexing topology., This work was supported in part by the Spanish Comisión Interministerial de Ciencia y Tecnología within projects under Grant TEC2016-76021-C2-1-R, Grant TEC2016-78047-R, and Grant TEC2016-79367-C2-2-R, in part by the Cost Action MP1401, and in part by the FEDER funds from the European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Low cutoff wavelength etched SMS structures towards verification of the quality of automotive antifreeze

  • Rodríguez Rodríguez, Wenceslao Eduardo
  • Rodríguez Rodríguez, Adolfo Josué
  • Ruiz Zamarreño, Carlos
  • Del Villar, Ignacio
  • Zúñiga Alanís, Manuel
Optical fiber single mode-multimode-single mode (SMS) structures can be used as wavelength detection-based sensors. In this work, we focus on the performance at short wavelengths, where optical sources and detectors are less expensive. Here, a self-image band with a high transmission power is monitored in this short-wavelength range. In addition, the diameter and the length of the SMS structure have been optimized in order to improve the sensitivity of the device. In this sense, a maximum refractive index sensitivity of 305 nm/RIU was achieved by an etched SMS with a diameter of 34μ m. Furthermore, the obtained devices were used for testing the quality of automotive coolant and antifreeze liquid., This work was supported in part by the Programa de Fortalecimiento de la Calidad Educativa (PFCE) and the Programa para el Desarrollo Profesional Docente (PRODEP), in part by the Direction of Strategic Programs and Projects of the Autonomus University of Tamaulipas (UAT) and the direction of the Academic Multidisciplinary Reynosa-Rodhe Unit, in part by the Spanish Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) under Grant TEC2016-78047-R, in part by the Government of Navarra under Grant PC095-096 OPTISENS and Grant PC081-082 BIOPTSENS AVANZA, and in part by the Public University of Navarra under Grant PJUPNA26.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Sensitivity enhancement in low cutoff wavelength long-period fiber gratings by cladding diameter reduction

  • Del Villar, Ignacio
  • Partridge, Matthew
  • Rodríguez Rodríguez, Wenceslao Eduardo
  • Fuentes Lorenzo, Omar
  • Socorro Leránoz, Abián Bentor
  • Díaz Lucas, Silvia
  • Corres Sanz, Jesús María
  • James, Stephen
  • Tatam, Ralph
The diameter of long-period fiber gratings (LPFGs) fabricated in optical fibers with a low cutoff wavelength was be reduced by hydrofluoric acid etching, enhancing the sensitivity to refractive index by more than a factor of 3, to 2611 nm/refractive index unit in the range from 1.333 to 1.4278. The grating period selected for the LPFGs allowed access to the dispersion turning point at wavelengths close to the visible range of the optical spectrum, where optical equipment is less expensive. As an example of an application, a pH sensor based on the deposition of a polymeric coating was analyzed in two situations: with an LPFG without diameter reduction and with an LPFG with diameter reduction. Again, a sensitivity increase of a factor of near 3 was obtained, demonstrating the ability of this method to enhance the sensitivity of thin-film-coated LPFG chemical sensors., This work was supported by the Spanish Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) (TEC2016-79367-C2-2-R, TEC2016-78047-R), by the Government of Navarre through the project with reference 2017/PI044 and with funding from the Engineering and Physical Sciences Research Council (EPSRC) UK, EP/L010437/1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Generation of lossy mode resonances with different nanocoatings deposited on coverslips

  • Fuentes Lorenzo, Omar
  • Goicoechea Fernández, Javier
  • Corres Sanz, Jesús María
  • Del Villar, Ignacio
  • Ozcariz Celaya, Aritz
  • Matías Maestro, Ignacio
The generation of lossy mode resonances (LMRs) with a setup based on lateral incidence of light in coverslips is a simple platform that can be used for sensing. Here the versatility of this platform is proved by studying the deposition of different coating materials. The devices were characterized with both SEM and AFM microscopy, as well as ellipsometry, which allowed obtaining the main parameters of the coatings (thickness, refractive index and extinction coefficient) and relating them with the different sensitivities to refractive index attained with each material. In this way it was possible to confirm and complete the basic rules observed with lossy mode resonance based optical fiber sensors towards the design of simpler and more compact applications in domains such as chemical sensors or biosensors., Agencia Estatal de Investigación; European Regional Development Fund (TEC2016-78047-R).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Gas detection using LMR-based optical fiber sensors

  • Dreyer, Uilian José
  • Ozcariz Celaya, Aritz
  • Ascorbe Muruzabal, Joaquín
  • Zubiate Orzanco, Pablo
  • Vitoria Pascual, Ignacio
  • Martelli, Cicero
  • Cardozo da Silva, Jean Carlos
  • Ruiz Zamarreño, Carlos
This work presents a first approach to the utilization of Lossy Mode Resonance (LMR) based optical fiber sensors for gas detection. The optical sensor is based on a SnO2 thin-film fabricated onto the core of cladding removed multimode fibers (MMF). The time response of the device to four different gases (NH3, NO, CO2 and O2) was monitored obtaining the best sensitivity for NO whereas the response to NH3 revealed the best repeatability., The authors acknowledge the financial support of Fundação Araucária, Secretaria de Estado da Ciência, Tecnologia e Ensino Superior do Paraná (SETI), CNPq, CAPES, FINEP, ANEEL and Spanish Ministry of Economy and Competitiveness Research Grant TEC2016-78047-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Femtomolar detection by nanocoated fiber label-free biosensors

  • Chiavaioli, Francesco
  • Zubiate Orzanco, Pablo
  • Del Villar, Ignacio
  • Ruiz Zamarreño, Carlos
  • Giannetti, Ambra
  • Tombelli, Sara
  • Trono, Cosimo
  • Arregui San Martín, Francisco Javier
  • Matías Maestro, Ignacio
  • Baldini, Francesco
The advent of optical fibre-based biosensors combined with that of nanotechnologies has provided an oppor-tunity for developing in situ, portable, lightweight, versatile and high-performance optical sensing platforms. We report on the generation of lossy mode resonances by the deposition of nm-thick metal oxide films on optical fibres, which makes it possible to measure precisely and accurately the changes in optical properties of the fibre-surrounding medium with very high sensitivity compared to other technology platforms, such as long period gratings or surface plasmon resonances, the gold standard in label-free and real-time biomolecular interaction analysis. This property, combined with the application of specialty structures such as D-shaped fibres, permits enhancing the light-matter interaction. SEM and TEM imaging together with X-EDS tool have been utilised to characterise the two films used, i.e. indium tin oxide and tin dioxide. More-over, the experimental transmission spectra obtained after the deposition of the nanocoatings have been numerically cor-roborated by means of wave propagation methods. With the use of a conventional wavelength interrogation system and ad-hoc developed microfluidics, the shift of the lossy mode resonance can be reliably recorded in response to very low analyte concentrations. Repeated experiments confirm a big leap in performance thanks to the capability to detect femtomolar concentrations in human serum, improving the detection limit by three orders of magnitude when compared with other fibre-based configurations. The biosensor has been regenerated several times by injecting sodium dodecyl sul-phate, which proves the capability of sensor to be reused., This work was supported by the European Community for theproject Hemospec (FP7-611682), by the National ResearchCouncil of Italy (CNR) for the Short Term Mobility program2017, by the Government of Navarra (project no. 72/2015)and by the Spanish Agencia Estatal de Investigación (AEI) andEuropean Regional Development Fund (FEDER) (TEC2016-78047-R, TEC2016-79367-C2-2-R).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Optical system based on multiplexed FBGs to monitor hand movements

  • Socorro Leránoz, Abián Bentor
  • Díaz Lucas, Silvia
  • Castillo, Silvia
  • Dreyer, Uilian José
  • Martelli, Cicero
  • Cardozo da Silva, Jean Carlos
  • Uzqueda Esteban, Itziar
  • Gómez Fernández, Marisol
  • Ruiz Zamarreño, Carlos
This contribution reports the development and characterization of an optical system based on parallel Fiber Bragg Gratings (FBGs) to monitor the movements of the wrist and fingers of a hand. The system consisted of a reflective configuration made of FBGs detecting the movements of the fingers and one more located on the wrist as a reference. All FBGs were multiplexed in order to collect the basic movements of the hand. Fibers were embedded in polydimethylsiloxane for protection and to give flexibility to the optical detection setup. Measurements of strain, angle and torsion were performed during the experiments, obtaining sensitivities up to 1.29 pm/ \mu \varepsilon in strain and 64.23 pm/° in angle. Also, a study on the influence of a single sensor on the performance of the whole system was analyzed for a complete study of this proof of concept. The obtained results present a simple system that can be used to monitor the positions of the hand or for the rehabilitation of patients suffering from neuromotor or post-stroke diseases., This work was supported in part by the National Research Agency through the Project from Spanish under Grant TEC2016-78047-R, in part by the Government of Navarra Project from Spanish under Grant SENSMOV: 0011-1365-2017-000135, in part by the Brazilian Projects of Fundação Araucária, in part by the Secretaria de Estado da Ciência, Tecnologia e Ensino Superior do Paraná (SETI), in part by Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq), in part by Financiadora de Estudos e Projetos (FINEP), and in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES), Brazil, under Grant 001.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Multimode – coreless – multimode fiber-based sensors: theoretical and experimental study

  • San Fabián García, Noé
  • Socorro Leránoz, Abián Bentor
  • Del Villar, Ignacio
  • Díaz Lucas, Silvia
  • Matías Maestro, Ignacio
This paper presents a complete study on the spectral behavior of a multimode-coreless-multimode fiber-optic structure, as well as its application as a refractometer and a liquid level sensor. The combination of two standard multimode fibers fused to a coreless fiber segment allows generating narrow interferometric bands in the optical spectrum, whose sensitivity can be improved by an adequate selection of the dimensions of the device (the coreless segment length and the diameter of the sensing area). A second way to improve the performance of the device is to deposit a thin film of SnO2, which allows increasing the sensitivity up to 314 nm/RIU. This widens the number of applications where this structure can be used. As an example, a liquid level sensor with 0.73 nm/mm sensitivity is presented., This work was supported by the Spanish Ministry of Economy and Competitiveness (TEC2016-78047-R).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Long period fiber grating for biosensing: an improved design methodology to enhance add-layer sensitivity

  • Bandyopadhyay, Sankhyabrata
  • Del Villar, Ignacio
  • Basumallick, Nandini
  • Biswas, Palas
  • Dey, Tanoy Kumar
  • Bandyopadhyay, Somnath
We present our theoretical study on the design of LPFG sensor where its add-layer sensitivity is enhanced. addlayer sensitivity quantifies the sensitivity of the sensor to the changes taking place within few tens of nanometers around the receptor molecules. Two different methodologies: the use of dual overlay layer and tailoring of the intermodal separation between two cladding modes, have been used to enhance the add-layer sensitivity. Using coupled mode analysis we compute several examples to carry out a detailed comparative analysis between the results obtained, focusing on the cladding mode near mode transition., This work was supported by Council of Scientific Research (CSIR), India during the 12th Five Year Plan. Project Nos. ESC-0102 and ESC-0110. The author I. D. Villar thankfully acknowledge the support of the Spanish Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) (TEC2016-78047-R) and the Government of Navarre through the project with reference 2017/PI044.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

SnO2-MOF-Fabry-Perot optical sensor for relative humidity measurements

  • López Aldaba, Aitor
  • López Torres, Diego
  • Elosúa Aguado, César
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • Arregui San Martín, Francisco Javier
  • López-Amo Sáinz, Manuel
In this paper, a new optical fiber sensor for relative humidity measurements is presented and characterized. The sensor is based on a SnO2 sputtering deposition on a microstructured optical fiber (MOF) low-finesse Fabry-Pérot (FP) sensing head. The feasibility of the device as a breathing sensor is also experimentally demonstrated. The interrogation of the sensing head is carried out by monitoring the Fast Fourier Transform phase variations of the FP interference frequency. This method substitutes the necessity of tracking the optical spectrum peaks or valleys, which can be a handicap when noise or multiple contributions are present: therefore, it is low-sensitive to noise and to artifacts signal amplitude. The sensor shows a linear behavior in a wide relative humidity range (20%–90% relative humidity) in which the sensitivity is 0.14 rad/%; the maximum observed instability is 0.007 rad, whereas the highest hysteresis is 5% RH. The cross correlation with temperature is also considered and a method to lower its influence is proposed. For human breathing measurement, the registered rising and recovery times are 370 ms and 380 ms respectively., The authors are grateful to A. Ortigosa, D. Erro, Dr. M. Bravo and Dr. R.A. Perez-Herrera. We also thank the Spanish Government projects TEC2013-47264-C2-2-R, TEC 2016-76021-C2-1-R, TEC2016-78047-R, TEC2016-79367-C2-2-R, Innocampus and the Cost Action MP 1401, as well as to the AEI/FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Generation of lossy mode resonances in planar waveguides toward development of humidity sensors

  • Fuentes Lorenzo, Omar
  • Corres Sanz, Jesús María
  • Matías Maestro, Ignacio
  • Del Villar, Ignacio
Lossy mode resonances (LMRs) are typically obtained with optical fibre. The Kretschmann configuration is an alternative but LMRs are generated with angles approaching grazing incidence. In this work, a new setup is explored, based on the lateral incidence of light on conventional planar waveguides such as glass slides or coverslips. Indium tin oxide was deposited onto both types of waveguides generating LMRs. The results of the simulations carried out agree well with the experimental results. As an example of the potential of this new and simple optical configuration, a humidity sensor with a sensitivity of 0.212 nm/% relative humidity (RH) in the range from 65% to 90% of RH was developed, which expedites the development of other types of sensors already explored with LMR-based optical fibre sensors., This work was supported in part by the Spanish Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) under Project TEC2016-78047-R and Project TEC2016-79367-C2-2-R and in part by Pinar del Rio University.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Bloch waves at the surface of a single-layer coating D-shaped photonic crystal fiber

  • González-Valencia, Esteban
  • Del Villar, Ignacio
  • Torres, Pedro
Bloch surface wave (BSW) platforms are particularly interesting for light confinement and surface sensitivity, as an alternative to the metal-based surface plasmon polaritons (SPP). However, most of the reported BSW platforms require depositing a large number of alternating dielectric layers to realize the excitation of the surface waves. In this Letter, we demonstrate an experimentally feasible D-shaped photonic crystal fiber (PCF) platform consisting of only a single dielectric layer on its flat surface, which can sustain Bloch waves at the boundary between the dielectric layer and the PCF cladding. The presence of the dielectric layer modifies the local effective refractive index, enabling a direct manipulation of the BSWs. In addition, the D-shaped structure provides direct contact with the external medium for sensing applications with an ultrahigh sensing figure of merit (2451 RIU-1) and has the potential to be used over a wide range of analyte refractive indices., Universidad Nacional de Colombia (Hermes code 46509); Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (TEC2016-78047-R).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Comparison between capacitive and microstructured optical fiber soil moisture sensors

  • López Aldaba, Aitor
  • López Torres, Diego
  • Campo-Bescós, Miguel
  • López Rodríguez, José Javier
  • Yerro Lizarazu, David
  • Elosúa Aguado, César
  • Arregui San Martín, Francisco Javier
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
Soil moisture content has always been an important parameter to control because it is a deterministic factor for site-specific irrigation, seeding, transplanting, and compaction detection. In this work, a discrete sensor that is based on a SnO2–FP (Fabry-Pérot) cavity is presented and characterized in real soil conditions. As far as authors know, it is the first time that a microstructured optical fiber is used for real soil moisture measurements. Its performance is compared with a commercial capacitive soil moisture sensor in two different soil scenarios for two weeks. The optical sensor shows a great agreement with capacitive sensor’s response and gravimetric measurements, as well as a fast and reversible response; moreover, the interrogation technique allows for several sensors to be potentially multiplexed, which offers the possibility of local measurements instead of volumetric: it constitutes a great tool for real soil moisture monitoring., This work was supported by the Spanish Government projects TEC2016-76021-C2-1-R, TEC2016-78047-R, TEC2016-79367-C2-2-R, Innocampus and the Cost Action MP 1401, as well as to the AEI/FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Optical fiber sensors based on gold nanorods embedded in polymeric thin films

  • Urrutia Azcona, Aitor
  • Goicoechea Fernández, Javier
  • Rivero Fuente, Pedro J.
  • Pildain Lería, Ander
  • Arregui San Martín, Francisco Javier
In this work, we present a study about the generation and analysis of optical resonances caused by gold nanorods (GNRs) embedded in films. GNRs were embedded in polymeric thin films using the Layerby-Layer nanoassembly (LbL) deposition technique. Polymer/GNRs thin films of different thicknesses were deposited on the surface of cladding removed optical fibers for sensing. The spectral responses of the optical fiber sensors were monitored during the build-up of the thin films. The generation of two Localized Surface Plasmon Resonances (LSPRs) associated to the GNRs was observed in thinner coatings. These devices with around 12 polymer/GNRs bilayers were characterized as refractometers, providing an intensity-based sensitivity up to 75.69 dB/RIU. For thicker polymer/GNRs overlays, both LSPRs bands were also generated and, additionally, it was observed a new Lossy Mode Resonance (LMR) band due to modes coupled to the sensitive coating. The dependence of these three resonance bands with the surrounding refractive index was studied. Finally, these sensors were tested in a climatic chamber in the 20-90% relative humidity (RH) range and the LMR showed a good sensitivity to RH changes while the LSPR bands remained very stable in comparison. Results showed an excellent sensitivity of 11.2 nm/%RH for the LMR, confirming the potential of this type of optical fiber sensor based on the combination of LSPRs and LMRs bands., This work was supported in part by the Spanish Ministry of Economy and Competitiveness - CICYT-FEDER TEC2013-43679R, TEC2016-79367-C2-2-R, TEC2016-78047-R and TRA2013-48603-C4-1-R Research Grants, and a UPNA post-doctoral research grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Optimized strain long-period fiber grating (LPFG) sensors operating at the dispersion turning point

  • Del Villar, Ignacio
  • Fuentes Lorenzo, Omar
  • Chiavaioli, Francesco
  • Corres Sanz, Jesús María
  • Matías Maestro, Ignacio
Two phenomena for enhancing the sensitivity of longperiod fiber gratings are combined toward an increase of the sensitivity to strain of this type of devices: the dispersion turning point (DTP) and the cladding diameter reduction by an etching process. The results prove that sensitivities up to 20 pm/με can be attained, which is a ten-fold improvement compared to the previous works. The sensitivity in the grating region, which is subjected to etching, does not depend on the order of the cladding mode responsible for the attenuation bands generated in the transmission spectrum, but on the proximity to the DTP for each mode order. On the other hand, the sensitivity to strain of the global structure, including the region without etching, can be increased for lower order modes in a perceptible way if the length of the etched region is smaller compared to the fiber region under stress. The experimental results are supported with simulations based on coupled-mode theory and on FIMMWAVE, which allows understanding the phenomena involved during the sensing process., This work was supported in part by the Spanish Ministry of Economy and Competitiveness (TEC2016-78047-R – AEI/FEDER, UE), in part by the Government of Navarra PI044 NANOSEN, and in part by the Pinar del Río University.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Fiber-based early diagnosis of venous thromboembolic disease by label-free D-dimer detection

  • Zubiate Orzanco, Pablo
  • Urrutia Azcona, Aitor
  • Ruiz Zamarreño, Carlos
  • Egea Urra, Josune
  • Fernández Irigoyen, Joaquín
  • Giannetti, Ambra
  • Baldini, Francesco
  • Díaz Lucas, Silvia
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
  • Santamaría Martínez, Enrique
  • Chiavaioli, Francesco
  • Del Villar, Ignacio
D-dimer is a useful diagnostic biomarker for deep vein thrombosis or pulmonary embolism, collectively referred to as venous thromboembolism (VTE). The ability to detect in real-time the amount of D-dimer with a fast and reliable method is a key step to anticipate the appearance of these diseases. Here, the results of a highly specific and sensitive biosensor for the detection of D-dimer based on lossy mode resonance in fiber optics are presented. The unique features of specialty fibers in light management integrated with microfluidics allow detecting D-dimer in human serum with a detection limit of 100 ng/mL, a value 5-fold below the clinical cutoff value. Comparison of the results achieved with mass-spectrometry-based proteomics, which allows for the identification of beta- and gamma-chains of fibrinogen, demonstrates the ability of our platform to specifically (>90%) recognize D-dimer. Therefore, this technology potentially represents a paradigm shift in the development of a simple, high-specificity and label-free biosensing platform, which can be applied to speed up diagnostic healthcare processes of venous thromboembolism toward an early diagnostic and personalized treatment system., This work is funded by grants from the Spanish Agencia Estatal de Investigación (AEI) and European Regional Development Fund (FEDER) (TEC2016-78047-R) and the Department of Economic Development from Government of Navarra (REF. PC023-24-25 , PC081-082 , and PI031). The Proteomics Unit of Navarrabiomed is a member of Proteored, PRB3-ISCIII, and is supported by grant PT17/0019/009, of the PE I+D+I 2013–2016 funded by ISCIII and FEDER. This work is partly funded by the European Commission, Directorate-General Communications Networks, Content and Technology (DG CONNECT) under the ERA-NET Cofund scheme - Horizon 2020 'Horizon 2020 – the Framework Programme for Research and Innovation ( 2014–2020 )' for the project OPTIMO and by National Research Council of Italy (CNR) within the Short Term Mobility program (STM 2017 ).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Self-referenced optical fiber sensor for hydrogen peroxide detection based on LSPR of metallic nanoparticles in layer-by-layer films

  • Goicoechea Fernández, Javier
  • Rivero Fuente, Pedro J.
  • Sada Oreja, Samuel
  • Arregui San Martín, Francisco Javier
Intensity-based optical fiber sensors are one of the most studied sensor approaches thanks to their simplicity and low cost. Nevertheless, their main issue is their lack of robustness since any light source fluctuation, or unexpected optical setup variation is directly transferred to the output signal, which, significantly reduces their reliability. In this work, a simple and robust hydrogen peroxide (H2O2) optical fiber sensor is proposed based on the Localized Surface Plasmon Resonance (LSPR) sensitivity of silver and gold metallic nanoparticles. The precise and robust detection of H2O2 concentrations in the ppm range is very interesting for the scientific community, as it is a pathological precursor in a wide variety of damage mechanisms where its presence can be used to diagnose important diseases such as Parkinson's disease, diabetes, asthma, or even Alzheimer's disease). In this work, the sensing principle is based the oxidation of the silver nanoparticles due the action of the hydrogen peroxide, and consequently the reduction of the efficiency of the plasmonic coupling. At the same time, gold nanoparticles show a high chemical stability, and therefore provide a stable LSPR absorption band. This provides a stable real-time reference that can be extracted from the spectral response of the optical fiber sensor, giving a reliable reading of the hydrogen peroxide concentration., This work has been supported by the Spanish Economy and Competitiveness TEC2016-78047-R grant and the PhD research grants of the Public University of Navarre.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Wavelength and phase detection based SMS fiber sensors optimized with etching and nanodeposition

  • Cardona-Maya, Yamile
  • Del Villar, Ignacio
  • Socorro Leránoz, Abián Bentor
  • Corres Sanz, Jesús María
  • Matías Maestro, Ignacio
  • Botero-Cadavid, Juan F.
The development of an optical fiber refractometer by hydrogen fluoride etching and sputtering deposition of a thin-film of indium tin oxide on a single-mode-multimode-single-mode fiber structure has been analyzed with the aim of improving the sensitivity to the changes of the refractive index (RI) of the external medium. The device is sensitive to the RI changes of the surrounding medium, which can be monitored by tracking the spectral changes of an attenuation band or with a fast Fourier transform (FFT) analysis. By using an optical spectrum analyzer combined with a simple FFT measurement technique, the simultaneous real time monitoring is achieved. The results show that the sensitivity depends on the thin-film thickness. A maximum of 1442 nm/RIU (refractive index unit) in the 1.32–1.35RIUrange has been attained. In addition, a theoretical analysis has been performed, where simu lationsmatched with the experimental results. As a practical appli cation of the developed optical fiber structure, a °Brix (°Bx) sensor has been implemented with a sensitivity of 2.13 nm/°Bx and 0.25 rad/°Bx respectively for wavelength and phase shift detection., This work was supported in part by the Agencia Estatal de Investigacion, in part by Fondo Europeo de Desarrollo Regional (TEC2016-78047-R), in part by the Government of Navarre through its projects with references: 2016/PI008, 2016/PC025, and 2016/PC026, and in part by the Colombian Administrative Department of Science, Technology and Innovation—Colciencias, through the Program for national doctorates, calling 617 of 2013.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Optimization in nanocoated D-shaped optical fiber sensors

  • Del Villar, Ignacio
  • Zubiate Orzanco, Pablo
  • Ruiz Zamarreño, Carlos
  • Arregui San Martín, Francisco Javier
  • Matías Maestro, Ignacio
Nanocoated D-shaped optical fibers have been proven as effective sensors. Here, we show that the full width at half minimum (FWHM) of lossy mode resonance can be reduced by optimizing the nanocoating width, thickness and refractive index. As a counterpart, several resonances are observed in the optical spectrum for specific conditions. These resonances are caused by multiple modes guided in the nanocoating. By optimizing the width of the coating and the imaginary part of its refractive index, it is possible to isolate one of these resonances, which allows one to reduce the full width at half minimum of the device and, hence, to increase the figure of merit. Moreover, it is even possible to avoid the need of a polarizer by designing a device where the resonance bands for TE and TM polarization are centered at the same wavelength. This is interesting for the development of optical filters and sensors with a high figure of merit., Spanish Ministry of Education and Science-FEDER (TEC2013-43679-R, TEC2016-78047- R); Government of Navarra Health Department (64/2015, 72/2015); Government of Navarra 2016/PI008.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Trends in the design of wavelength-based optical fibre biosensors (2008–2018)

  • Socorro Leránoz, Abián Bentor
  • Santano Rivero, Desiree
  • Del Villar, Ignacio
  • Matías Maestro, Ignacio
During the last decades, both governments and companies have been committed to the continuous checking of biological parameters, which can prevent extra costs to administrations. A very efficient way to address this issue is by designing biosensors. This contribution reviews the advances made using optical fibre technology, which have lately agglutinated much of the scientific interest related to the development of biosensors. However, the wide number of publications describing the use of optical fibre for detecting biomarkers has probably blurred the main goal: obtaining portable, simple, easy-to-handle and cost-effective biosensors. With this purpose, this contribution presents some optical fibre structures which have been analysed in terms of several optical parameters of interest from a photonics point of view: sensitivity, quality factor, full width at half minimum, limit of detection and figure of merit. This has made it possible to classify the most advanced optical fibre sensing techniques and, hence, their suitability when developing biosensing applications., This work was supported by the Regional Government of Navarra, Spain (projects with references 72/2015 and PC021-022) and by the Agencia Estatal de Investigación (Spanish National Research Agency) through the project with reference TEC2016-78047-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Novel bloch wave excitation platform based on few-layer photonic crystal deposited on D-shaped optical fiber

  • González Valencia, Esteban
  • Del Villar, Ignacio
  • Torres, Pedro
With the goal of ultimate control over the light propagation, photonic crystals currently represent the primary building blocks for novel nanophotonic devices. Bloch surface waves (BSWs) in periodic dielectric multilayer structures with a surface defect is a well-known phenomenon, which implies new opportunities for controlling the light propagation and has many applications in the physical and biological science. However, most of the reported structures based on BSWs require depositing a large number of alternating layers or exploiting a large refractive index (RI) contrast between the materials constituting the multilayer structure, thereby increasing the complexity and costs of manufacturing. The combination of fiber–optic-based platforms with nanotechnology is opening the opportunity for the development of high-performance photonic devices that enhance the light-matter interaction in a strong way compared to other optical platforms. Here, we report a BSW-supporting platform that uses geometrically modified commercial optical fibers such as D-shaped optical fibers, where a few-layer structure is deposited on its flat surface using metal oxides with a moderate difference in RI. In this novel fiber optic platform, BSWs are excited through the evanescent field of the core-guided fundamental mode, which indicates that the structure proposed here can be used as a sensing probe, along with other intrinsic properties of fiber optic sensors, as lightness, multiplexing capacity and easiness of integration in an optical network. As a demonstration, fiber optic BSW excitation is shown to be suitable for measuring RI variations. The designed structure is easy to manufacture and could be adapted to a wide range of applications in the fields of telecommunications, environment, health, and material characterization., Fundación para la Promoción de la Investigación y la Tecnología-Banco de la República of Colombia (Contract 202103); Universidad Nacional de Colombia (Hermes code 46509); Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (TEC2016-78047-R and PID2019-106231RB-I00). E.G.V. acknowledges the support of COLCIENCIAS through the Doctoral Scholarship program.