Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 62
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Automatic detection of moistures in different construction materials from thermographic images

  • Garrido González, Iván
  • Lagüela López, Susana
  • Sfarra, Stefano
  • Madruga, F. J.
  • Arias Sánchez, Pedro
Moisture is a pathology that damages all type of construction materials, from materials of building envelopes to materials of bridges. Its presence can negatively affect the users’ conditions of indoor comfort. Furthermore, heating and cooling energy demand can be increased by the presence of moist materials. Infrared thermography (IRT) is a common technique in the scientific field to detect moisture areas, because of its non-destructive, non-contact nature. In addition, IRT allows an earlier moisture detection compared to the analysis using visible images. In order to optimize thermographic inspections, this paper presents one of the first methodologies for the automatic detection of moisture areas affecting the surface of construction materials. The methodology is based on the application of visible image processing techniques adapted to thermographic images through the consideration of an image conversion format, a thermal criterion and a thermal and a geometric filter. The precision, recall and F-score parameters obtained are around 83.5%, 73.5% and 72.5%, respectively, considering the false positives/negatives through a series of 12 tests made in different construction materials and ambient conditions, comparing the preliminary results with existing methodologies., Ministerio de Economía y Competitividad | Ref. FPU16/03950, Ministerio de Economía y Competitividad | Ref. TEC2016-76021-C2-2-R, Universidad de Salamanca. Cátedra Iberdrola VIII Centenario
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A microwave polarimeter demonstrator for astronomy with near-infra-red up-conversion for optical correlation and detection

  • Casas-Reinares, F. J.
  • Ortiz, David
  • Aja, Beatriz
  • Fuente, Luisa de la
  • Artal, Eduardo
  • Ruiz, Rubén
  • Mirapeix, Jesús M.
This paper presents a 10 to 20 GHz bandwidth microwave polarimeter demonstrator, based on the implementation of a near-infra-red frequency up-conversion stage that allows both the optical correlation, when operating as a synthesized-image interferometer, and signal detection, when operating as a direct-image instrument. The proposed idea is oriented towards the implementation of ultra-sensitive instruments presenting several dozens or even thousands of microwave receivers operating in the lowest bands of the cosmic microwave background. In this work, an electro-optical back-end module replaces the usual microwave detection stage with Mach–Zehnder modulators for the frequency up-conversion, and an optical stage for the signals correlation and detection at near-infra-red wavelengths (1550 nm). As interferometer, the instrument is able to correlate the signals of large-format instruments, while operating as a direct imaging instrument also presents advantages in terms of the possibility of implementing the optical back end by means of photonic integrated circuits to achieve reductions in cost, weight, size, and power consumption. A linearly polarized input wave, with a variable polar angle, is used as a signal source for laboratory tests. The receiver demonstrator has proved its capabilities of being used as a new microwave-photonic polarimeter for the study of the lowest bands of cosmic microwave background., The authors would like to thank Spanish Ministry for Economy and Competitiveness (currently Ministry of Science, innovation and Universities) for the financial support provided under the projects with references ESP2015-70646-C2-1-R, AYA2015-72768-EXP, ESP2017-83921-C2-1-R, TEC2013-47264-C2-1-R,TEC2016-76021-C2-2-R and CIBERBBN all co-financed with EU FEDER funds., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

In-field torsion measurements on solar trackers using fiber optic sensors

  • Leandro González, Daniel
  • Bravo Acha, Mikel
  • Júdez Colorado, Aitor
  • Mariñelarena Ollacarizqueta, Jon
  • Falcone Lanas, Francisco
  • Loayssa Lara, Alayn
  • López-Amo Sáinz, Manuel
  • Jiménez, S.
  • Achaerandio, Álvaro
In-field torsion measurements on solar trackers using fiber Bragg gratings are presented. 45 FBG sensors have been deployed in an operational solar energy plant to study the mechanical response of the structure to wind., This work was supported by the Gobierno de Navarra project WINDSOLAR (0011-1365-2017-000122), the Spanish AEI project TEC2016-76021-C2, FEDER Funds, ISC talent grant, and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Ultra-long (290 km) remote interrogation sensor network based on a random distributed feedback fiber laser

  • Miguel Soto, Verónica de
  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
In this work, an interferometric sensor has been interrogated 290 km away from the monitoring station, reaching the longest distance in fiber optic sensing up to date. This has been attained by employing a double-pumped random distributed feedback fiber laser as the light source for a fiber optic low-coherence interferometry scheme. Additionally, the capability of the system to achieve coherence multiplexing for ultra-long range measurements (up to 270 km) has been proved, without presenting crosstalk between the sensors. The use of coherence multiplexing together with a random distributed feedback fiber laser addresses two of the main limitations of long-range sensing setups: their limited multiplexing capability and the need to reach the maximum monitoring distance., Spanish Comision Interministerial de Ciencia y Tecnología within project TEC2016-76021- C2-1-R as well as the FEDER funds, and by the Institute of Smart Cities by means of a postdoctoral fellowship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

Contribution to the advancement of Brillouin optical time-domain analysis sensors

  • Iribas Pardo, Haritz
Distributed fiber optic sensors (DFOS) are becoming an increasingly used technology to monitor the integrity of structures. This is due to the fact that this technology can be embedded within the structure and provide distributed information of several relevant parameters for the structure, such as stress, temperature or strain. In DFOS the fiber itself is the transducer, and the measurement of a given parameter is provided continuously along the fiber at a particular spatial resolution, without blind spots. This is the main advantage of DFOS compared to other sensing technologies, the fact that DFOS provide information of a given parameter over thousands or hundreds of thousands of positions along the optical fiber. Conversely, other sensing technologies only give information over the specific points where they are installed, that is to say, they are point sensors. This characteristic of distributed fiber sensors makes them enormously interesting when many points of a structure need to be monitored. In this case, a single distributed fiber sensor can replace many point sensors, which considerably reduces the cost per sensing point when monitoring large structures. In addition, due to the properties of the optical fiber, these sensors have a better performance compared to other kind of sensors. Among other important features, DFOS present a low signal loss, electromagnetic interference immunity, remote sensing and multiplexing capabilities, light weight, and are chemically passive, which make them a very attractive technology for field measurements. Therefore, DFOS have the added advantage of being electrically, magnetically, and chemically passive, so that can be placed in harsh environments, such as nuclear plants or areas with gas concentration, where, due to the possibility of a short circuit, electronic sensors cannot be placed. Al these characteristics make this technology unique. Among the different types of DFOS, those based on stimulated Brillouin scattering, and more specifically, those that build upon the Brillouin optical time-domain analysis (BOTDA) technique, are one of the most promising. The main characteristic that makes BOTDA sensors as promising, is the ability to perform distributed strain and temperature measurements over long distances at high spatial resolution. For the functioning of the sensor, the general interaction that takes place in the BOTDA technique involves two optical waves: a continuous wave probe and a counter-propagating pump pulse. The performance of the sensor response is limited, among others, by the maximum optical power of both waves that can be injected into the fiber. In this way, the main research line in BOTDA sensors is focused on the study of the physical limitations of the technique as well as the development of solutions to these constraints. Another important line relies on the simplification of the sensor setup so as to reduce the complexity and the cost of the sensor. This thesis dissertation contributes to the development of BOTDA sensors by means of different contributions in these two research lines. Several theoretical and experimental studies have been conducted to accurately determine the main limits to the sensor performance in terms of the maximum optical power of the pump and probe waves that can be used. One of the most important limitation in BOTDA sensors is the onset of non-local effects, which limits the maximum pump and probe waves power that can be injected in the fiber, and hence, the signal-to-noise ratio (SNR) at the receiver is worsen. The so-called non-local effects generate measurement errors, because the Brillouin spectra measured at distant locations depend on the interaction at previous positions in the fiber. In this research line, we have examined the effects caused by the limited extinction ratio (ER) of the pump pulse, finding that, among other impairments, it leads to the onset of a new non-local effect originated in the depletion of the pedestal of the pump wave. In addition, it has been found that the pedestal deformation caused by the transient response of erbium-doped fiber amplifiers, which are typically deployed to amplify the pump pulse, also constrains the performance of the sensor. Another contribution is the study of the techniques presented in the literature to mitigate the impairments caused by second-order non-local effects, which cause a frequency-dependent spectral deformation of the pulse. The findings of this study show that these techniques are only applicable when the Brillouin frequency shift (BFS) of the fiber is uniform, which is hard to find in real applications. Lastly, another subject of study is the limitations of the pump and probe optical power in coded-pump wave BOTDA configurations. We have observed that, in addition to some known limitations, there are two important restrictions that have to be taken into account: the onset of non-local effects and the non-linear amplification of the probe wave, both generated by the successive gain induced by the multiple pulses of the coded-pump wave. As a consequence of the findings of these studies, BOTDA configurations intended to solve these limitations have also been proposed during the thesis work. A technique to mitigate the constraints induced by the limited ER of the pump pulse has been presented. This method is based on adding a dithering to the optical source used to generate the two waves involved in the BOTDA sensor, so that the optical wavelength of both signals is modulated. In this way, the Brillouin interaction between the pedestal and the probe wavefronts become uncorrelated, and hence, the influence of the pedestal is greatly reduced. Another contribution is a technique focused on completely overcome the onset of second-order non-local effects. This method is based on continuously tracking the BFS distribution of the fiber, which combined with the probe-dithering method, has allowed, to the best of our knowledge, to inject the highest demonstrated probe wave power in a BOTDA sensor to date. In addition, in order to improve the SNR of the sensor, a novel BOTDA sensor has been proposed. This analyzer combines mono-color cyclic coding and probe-dithering techniques, so that the impairments caused by a coded pump wave are reduced, and hence, it is possible to increase the optical power and consequently enhance the sensing distance range. Finally, a novel simplified BOTDA sensor has been presented, which relies on passive optical filtering of the spectral components generated in a single optical source. In this way, the sensor setup is simplified reducing the number of optical devices, and therefore, the cost of the sensor is also reduced. This BOTDA configuration has been shown to have a performance comparable to more complex setups., Nafarroako Unibertsitate Publikoari, ikertzaileak prestatzeko dirulaguntza, atzerriko egonaldia zein bestelako laguntza moten bidez; Espainiako Ekonomia eta Lehiakortasun Ministerioari, TEC2013-47264-C2-2-R eta TEC2016-76021-C2-1-R proiektuen bidez; Europako Eskualde Garapenerako Funtsari (FEDER funds)., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Interferometric vs wavelength selective optical fiber sensors for cryogenic temperature measurements

  • Miguel Soto, Verónica de
  • Leandro González, Daniel
  • López Aldaba, Aitor
  • Beato López, Juan Jesús
  • Pérez de Landazábal Berganzo, José Ignacio
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this work, a preliminary study of the behavior of two different interferometric fiber optic sensors and two different wavelength selective fiber optic sensors is performed. A photonic cristal fiber Fabry-Pérot interferometer, a Sagnac interferometer, a commercial fiber Bragg grating (FBG) and a π-phase shifted fiber Bragg grating interrogated in a random distributed feedback fiber laser are analyzed. A comparison of their sensitivities and resolutions is carried out to analyze their performance as sensors for cryogenic temperatures, taking into account their advantages and drawbacks., Financial support from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R and the FEDER funds are acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Medida de torsión en seguidores solares con sensores de fibra óptica, Torsion measurements on solar trackers using fiber optic sensors

  • Leandro González, Daniel
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
  • Loayssa Lara, Alayn
  • Júdez Colorado, Aitor
  • Mariñelarena Ollacarizqueta, Jon
  • Falcone Lanas, Francisco
  • Jiménez Romero, Sergio
  • Moriana García, Iñaki
En este trabajo se ha monitorizado la torsión sufrida por una estructura de seguidores solares empleando sensores de fibra óptica. Estas medidas de campo se han obtenido con una red de sensores formada por 45 redes de difracción de Bragg en una huerta solar activa. Estos resultados, correlados con la velocidad y dirección del viento permitirían aumentar la eficiencia de los seguidores y ayudar a entender y prevenir efectos negativos relacionados con inestabilidades aeroelásticas., In this work, the torsion experienced by set of solar trackers is monitored using fiber optic sensors. The in-field measurements were obtained using a sensor network comprising 45 fiber Bragg gratings in an active solar plant. These results, correlated with wind speed and direction could increase efficiency and lead to understand and prevent harmful effects related to aeroelastic instability events., Este trabajo ha sido financiado por el proyecto WINDSOLAR (0011-1365-2017-000122) del Gobierno de Navarra, los proyectos TEC2016-76021-C2 y PID2019-107270RB-C22, los fondos FEDER, la European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143 y las fundaciones 'Caja Navarra' y 'la Caixa' con el proyecto LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Microstructured optical fiber sensor for soil moisture measurements

  • López Aldaba, Aitor
  • López Torres, Diego
  • Campo-Bescós, Miguel
  • López Rodríguez, José Javier
  • Yerro Lizarazu, David
  • Elosúa Aguado, César
  • Arregui San Martín, Francisco Javier
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
Trabajo presentado a la 26th International Conference on Optical Fiber Sensors. Suiza, 2019, A discrete sensor based on a Sn0₂-FP (Fabry-Pérot) cavity is presented and characterized in real soil conditions. Results are compared, for the first time to our knowledge, with a commercial capacitive sensor and gravimetric measurements., The Spanish Government projects TEC 2016-76021-C2-1-R, TEC2016-78047-R, TEC2016-79367-C2-2-R, Innocampus and the Cost Action MP 1401, as well as to the AEI/FEDER Funds are acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Spectral shadowing suppression technique in phase-OTDR sensing based on weak fiber Bragg grating array

  • Miguel Soto, Verónica de
  • Jason, Johan
  • Kurtoglu, Deniz
  • López-Amo Sáinz, Manuel
  • Wuilpart, Marc
A postprocessing procedure is presented to suppress spectral shadowing in phase-OTDR sensing systems based on a weak fiber Bragg grating array. A complete theoretical analysis of the interfering signals has been carried out to identify a compensation method. The proposed approach has been applied to simulated and experimental phase-OTDR in the context of vibration measurements. Fast Fourier transform has been employed to analyze the obtained results, which has verified the validity of the proposed method to suppress spectral shadowing., This work was performed with support from BEWARE Fellowships/Academia project 1510633 financed by the Walloon region in Belgium. Also with the support of the Spanish Government project TEC 2016-76021-C2-1-R as well of the AEI/FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Optical fiber lasers assisted by microdrilled optical fiber tapers

  • Pérez Herrera, Rosa Ana
  • Pallarés Aldeiturriaga, D.
  • Júdez Colorado, Aitor
  • Rodríguez Cobo, Luis
  • López-Amo Sáinz, Manuel
  • López Higuera, José Miguel
In this Letter, we present an analysis of the backscattering generated in a microdrilled tapered fiber within a short-linear-cavity fiber laser. We propose and experimentally demonstrate a fiber cavity laser based on a tapered optical fiber segment that generates artificially controlled backscattering. The 50-mu m-waist taper was fabricated from a standard single-mode fiber, and the taper was subsequently microdrilled using a femtosecond laser micromachining system. The laser generation properties conferred by the microdrilled optical fiber taper were experimentally investigated. A single-wavelength laser emission at 1562 nm with an output power of 10 dBm and an optical signal-to-noise ratio greater than 45 dB is demonstrated., Ministerio de Economía y Competitividad (MINECO) (TEC 2016-76021-C2-R); European Regional Development Fund (ERDF).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

WDM and TDM interrogation by sequentially pulsing direct modulated DFBs

  • Pérez González, Asier
  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Pérez Herrera, Rosa Ana
  • López-Amo Sáinz, Manuel
A new versatile and cost-effective interrogation system by pulsing direct modulated (DM) DFB laser diodes is proposed. 1 pm wavelength resolution and 600 m sensor spacing is demonstrated by sequentially pulsing a DM DFB., This work was supported by the Spanish AEI project TEC2016-76021-C2-01, FEDER Funds, and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143 and the institute of Smart Cities (UPNA) talent grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Quasi-distributed vibration sensing using OFDR and weak reflectors

  • Zhu, Mengshi
  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
  • Murayama, Hideaki
The authors proposed a quasi-distributed vibration sensing technique using in-line weak reflectors and optical frequency domain reflectometry (OFDR). As a result, they achieved an 8 kHz measurable vibration frequency with a 15-20 cm spatial resolution employing a low repetition rate (similar to 8 Hz). Moreover, a measurable frequency of 30 kHz was achieved for a 1.5 m spatial resolution. The ability of the system to determine the frequency and amplitude of several sections vibrating simultaneously is evaluated for different configurations. Because of the simple arrangement, high detectable frequency, and high sensitivity, this approach is expected to be especially well suited for mechanical vibration sensing applications, particularly in medium-sized structures., Ministerio de Economía, Industria y Competitividad, Gobierno de España (TEC2016-76021-C2-1).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Structural health monitoring of solar trackers using distributed fiber optic sensors

  • Mariñelarena Ollacarizqueta, Jon
  • Mompó Roselló, Juan José
  • Zurita Gabasa, Jesús
  • Urricelqui Polvorinos, Javier
  • Júdez Colorado, Aitor
  • López-Amo Sáinz, Manuel
  • Jiménez Romero, Sergio
  • Achaerandio, Álvaro
  • Loayssa Lara, Alayn
We demonstrate the application of a novel type of distributed fiber optic sensors (DFOSs) to dynamically monitor the effects of wind on solar tracker structures used in photovoltaic power stations. This DFOS is based on the stimulated Brillouin scattering nonlinear optical effect in optical fiber, which can be used to measure the distribution of strain and temperature along a given structure. However, contrary to existing solutions, the sensor provides dynamic real-time measurements with hundreds or even thousands of full simultaneous measurements for all positions in the fiber each second. Moreover, high-precision and high spatial resolution are obtained. This so-called dynamic Brillouin optical time-domain analysis (D-BOTDA) sensor provides real-time monitoring of the bending and torsion of the structure of solar trackers in response to wind load. This helps the solar tracker manufacturer asses and improve the mechanical designs so as to introduce corrective measures and develop cost-effective components that properly withstand the effects of wind at any given location. We experimentally demonstrate the application of a D-BOTDA sensing system to measure distributed bending and, for the first time to our knowledge, also distributed torsion along the stressed beam of the solar tracker. For this purpose, we have developed a procedure to instrument the torsion beam with two optical sensing fibers that are fixed helically wound along the beam in opposite directions, so that any common-mode thermal or bending effects are removed. We initially performed tests in a laboratory facility in which sections of the torsion beam could be subjected to controlled moments. Static and dynamic loads were applied and the measured deformations were compared to those obtained with fiber Bragg gratings, which just provide point measurements of strain. In both cases, full agreement was demonstrated. Finally, the system was installed in an operational solar park., The authors wish to acknowledge the financial support of the Spanish Agencia Estatal de Investigación through projects TEC2016-76021-C2-1-R and RTC-2017-6239-3, FEDER funds, Gobierno de Navarra project 0011-1365-2017-000122, the Universidad Pública de Navarra, the Smart Cities Institute and Uptech-Sensing S.L.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Effects of pump pulse extinction ratio in Brillouin optical time-domain analysis sensors

  • Iribas Pardo, Haritz
  • Mariñelarena Ollacarizqueta, Jon
  • Feng, Cheng
  • Urricelqui Polvorinos, Javier
  • Schneider, Thomas
  • Loayssa Lara, Alayn
We report on two previously unknown non-local effects that have been found to impair Brillouin optical time-domain analysis (BOTDA) sensors that deploy limited extinction ratio (ER) pump pulses. The first one originates in the increased depletion of the pedestal of the pump pulses by the amplified probe wave, which in turn entails a reduced amplification of the probe and a measurement distortion. The second effect is due to the interplay between the transient response of the erbium-doped fiber amplifiers (EDFA) that are normally deployed to amplify the pump and the pedestal of the pump pulses. The EDFA amplification modifies the pedestal that follows the pulses in such a way that it also leads to a distortion of the measured gain spectra after normalization. Both effects are shown to lead to non-local effects in the measurements that have similar characteristics to those induced by pump pulse depletion. In fact, the total depletion factor for calculations of the Brillouin frequency shift (BFS) error in BOTDA sensors is shown to be the addition of the depletion factors linked to the pump pulse as well as the pedestal. A theoretical model is developed to analyze both effects by numerical simulation. Furthermore, the effects are investigated experimentally in long-range BOTDA sensors. The pedestal depletion effect is shown to severely constrain the probe power as well as the minimum ER of the pulses that can be deployed in BOTDA sensors. For instance, it is shown that, in a long-range dual-probe BOTDA, an ER higher that 32-dB, which is above that provided by standard electro-optic modulators (EOM), is necessary to be able to deploy a probe power of -3 dBm, which is the theoretical limit for that type of sensors. Even more severe can be the limitation due to the depletion effect induced by the EDFA transient response. It is found that the impairments brought by this effect are independent of the probe power, hence setting an ultimate limit for the BOTDA sensor performance. Experimentally, a long-range BOTDA deploying a 26-dB ER EOM and a conventional EDFA is shown to exhibit a BFS error higher than 1 MHz even for very small probe power., Spanish Ministerio de Economía y Competitividad (TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R); FEDER funds; Universidad Pública de Navarra; German Research Foundation (DFG SCHN 716/13-1).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Real time measuring system of multiple chemical parameters using microstructured optical fibers based sensors

  • López Aldaba, Aitor
  • López Torres, Diego
  • Elosúa Aguado, César
  • Arregui San Martín, Francisco Javier
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this paper, a multiplexing system for simultaneous interrogation of optical fiber sensors which measure different parameters is presented and validated. The whole system has been tested with 6 different sensing heads with different purposes: one temperature sensing head, two relative humidity sensors and three VOCs leak sensors; all of them based on microstructured optical fibers. The interrogation system uses the FFT technique to isolate each sensor's interference, enabling their simultaneous interrogation. The system interrogates all the sensors at frequencies up to 1 KHz, showing a good performance of each measurement without crosstalk between sensors. The developed system is independent of the sensors' purpose or of the multiplexing topology., This work was supported in part by the Spanish Comisión Interministerial de Ciencia y Tecnología within projects under Grant TEC2016-76021-C2-1-R, Grant TEC2016-78047-R, and Grant TEC2016-79367-C2-2-R, in part by the Cost Action MP1401, and in part by the FEDER funds from the European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Multiplexing optical fiber Fabry-Perot interferometers based on air-microcavities

  • Pérez Herrera, Rosa Ana
  • Novais, Susana
  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Silva, Susana
  • Frazão, Orlando
  • López-Amo Sáinz, Manuel
In this work we demonstrate the multiplexing capability of new optical fiber Fabry-Perot interferometers based on airmicrocavities using a commercial FBG interrogator. Three optimized air-microcavity interferometer sensors have been multiplexed in a single network and have been monitored using the commercial FBGs interrogator in combination with FFT calculations. Results show a sensitivity of 2.18 π rad/mε and a crosstalk-free operation., This work was supported by the Spanish AEI TEC2016-76021-C2, FEDER Funds; and also by the ERDF – European Regional Development Fund through the Operational Programme for Competitiveness and Internationalization - COMPETE 2020 Programme and by National Funds through the Portuguese funding agency, FCT - Fundação para a Ciência e a Tecnologia within project ENDOR - Endoscope based on New Optical Fibre Technology for Raman Spectroscopy (POCI-01-0145-FEDER-029724). M. Bravo received funding from Marie Sklodowska-Curie grant agreement No 838143.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Detrimental effects in Brillouin distributed sensors caused by EDFA transient

  • Feng, Cheng
  • Iribas Pardo, Haritz
  • Mariñelarena Ollacarizqueta, Jon
  • Schneider, Thomas
  • Loayssa Lara, Alayn
We investigate the deleterious effect and the error in Brillouin optical time-domain analyzers induced by the combination of a low extinction ratio pulse generation with the transient behavior of erbium-doped fiber amplifiers., The authors wish to acknowledge the financial support of the German Research Foundation (DFG SCHN 716/13-1), Spanish Ministerio de Economía y Competitividad (TEC2016-76021-C2-1-R, TEC2013-47264-C2-2-R) and FEDER.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Traffic monitoring based on FBG sensor arrays in asphalt structures

  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Bravo Acha, A.
  • Bravo Navas, M.
  • Mitxelena, J. R.
  • Martínez Mazo, J. J.
  • Camarero, E.
  • López-Amo Sáinz, Manuel
We evaluate the capabilities of optical fiber sensors to measure traffic flow, speed, weight estimation and pavement degradation. The proper operation of the system has been proved 3.5 years after the installation in a metropolitan road., This work was supported by the Spanish AEI project TEC2016-76021-C2, FEDER Funds, and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143 and the institute of Smart Cities (UPNA) talent grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Distributed humidity sensor for moisture-front monitoring in soils

  • Leandro González, Daniel
  • Delgado Zabala, Oihane
  • López Rodríguez, José Javier
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
In this contribution, high spatial resolution distributed humidity sensing was demonstrated for moisture-front monitoring in soils by using polyimide coated optical fiber., This work was supported by the Spanish AEI project TEC2016-76021-C2, FEDER Funds, and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

All-PM fiber loop mirror interferometer analysis and simultaneous measurement of temperature and mechanical vibration

  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
In this work, a new all-polarization maintaining (PM) fiber loop mirror interferometer is proposed and validated as temperature and mechanical vibration sensor. The scheme employs the arms of a PM coupler as communication fibers, fused with a relative angle of 45° to the sensing fiber. The length of the arms is equal so their contribution in canceled, obtaining a total transfer function exclusively defined by the sensing fiber. The capabilities of the system as sensor are tested, achieving mechanical vibration and temperature sensing without crosstalk between measurands. In this manner, vibration frequencies up to 1.5 kHz have been monitored using a commercial interrogator with a scan rate of 1 Hz and a technique based on the fast Fourier transform. Additionally, the immunity of the setup to external perturbations in the communication fibers is studied and compared to the conventional approach., This work was supported in part by the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R and in part by the Institute of Smart Cities by means of a postdoctoral fellowship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Virtual FBGs using saturable absorbers for sensing with fiber lasers

  • Rodríguez Cobo, Luis
  • Pérez Herrera, Rosa Ana
  • Quintela, M. A.
  • Ruiz Lombera, Rubén
  • López-Amo Sáinz, Manuel
  • López Higuera, José Miguel
The spectral narrowing of Fiber Bragg Gratings (FBGs) introduced by unpumped Er-doped fiber (EDF) was analyzed for fiber lasers (FL). Owing to spatial hole burning (SHB), the spectral response of a virtual FBG can be employed for narrowing the band pass filter employed to determine the lasing wavelength of laser cavities. A common FL was mounted to analyze the spectral stability of the method, and a FL sensor for strain and temperature measurements was experimentally characterized to determine the stability of the narrowing effect achieved by the unpumped EDF, which acts as a virtual FBG. The results exhibited remarkably good narrowing effects of the spectral response of uniform FBGs., This research was funded by MINECO (Spain) project TEC 2016-76021-C2-R and FEDER funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Tunable SESAM-based mode-locked soliton fiber laser in linear cavity by axial-strain applied to a FBG

  • Aporta, I.
  • Leandro González, Daniel
  • Quintela, M. A.
  • Pérez Herrera, Rosa Ana
  • López-Amo Sáinz, Manuel
  • López Higuera, José Miguel
A self-started stable tunable mode-locked (ML) soliton fiber laser in a linear cavity structure composed by commercial passive elements is presented in this paper. It is based on the combination of an Erbium doped fiber (EDF) as the active medium, and a saturated fiber Bragg grating (FBG) as a partial mirror of the cavity. The other side of the cavity consists of a semiconductor saturable absorber mirror (SESAM) acting also as the mode-locking device. The central wavelength of the FBG is selected by the application of axial strain giving rise to a tunable soliton over 8.6 nm on the C band with a variable spacing of 0.01 nm. The laser delivers 18.9 ps long pulses with a 0.14 nm bandwidth, an 8.2 MHz repetition rate, a pulse energy of 89 pJ and a peak power of 4.71 W., This work was supported in part by the Spanish Comisión Interministerial de Ciencia y Tecnología under Project TEC2016-76021-C2—R and in part by the Feder funds and the Spanish Ministry of Education and Culture, under Scholarship FPU14/02196.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Relative humidity multi-point optical sensors system based on Fast Fourier multiplexing technique

  • López Aldaba, Aitor
  • López Torres, Diego
  • Elosúa Aguado, César
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • Arregui San Martín, Francisco Javier
  • López-Amo Sáinz, Manuel
In this paper, a new multipoint optical fiber system for relative humidity measurements based on Sn02-FP (Fabry-Pérot) sensing heads and an optical interrogator as single active device is presented and characterized. The interrogation of the sensing heads is carried out by monitoring the Fast Fourier Transform phase variations of the FP (Fabry-Pérot) interference frequencies. This method allows to multiplex several sensors with different wavelength spacing interference pattern. The sensors operate within a wide humidity range (20%-90% relative humidity) with low crosstalk between them. Five sensing heads have been measured using two different channels of the optical interrogator. The availability of four channels in the interrogator allows to multiplex a higher number of sensors, reducing proportionally the cost of each sensing point., The authors thank the Spanish Government projects TEC 2013-47264-C2-2-R, TEC2016-76021-C2-1-R, TEC2013- 43679-R Innocampus and the INTERREG SUDOE Project SOE3/P2/P714 as well as to the FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Multiparameter sensor based on a multiinterferometric serial configuration for temperature and strain measurements

  • Pérez Herrera, Rosa Ana
  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Novais, Susana
  • Pradas Martínez, Javier
  • López-Amo Sáinz, Manuel
In this work, a multi-parameter point sensor based on the combination of Fabry-Perot (FP) and the anti-resonant (AR) reflecting guidance in cascade configuration is proposed and experimentally demonstrated. This structure, based on FP interference and AR reflecting guidance, was fabricated with two different air micro-cavities. The attained experimental results showed different strain and temperature sensitivities for the antiresonance contribution. However, when analyzing the FP interference, only strain sensitivity was observed, demonstrating that this air micro-cavity was also insensitive to temperature variations., This work was supported by the Spanish AEI projects TEC2016-76021-C2 and PID2019-107270RB-C22, FEDER Funds, the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 838143, Projects for young researches UPNA 2019, “Caja Navarra” and “la Caixa” foundations under agreement LCF/PR/PR13/51080004 and the grant BGP18/00180 of the “Beatriz Galindo” programme from the Spanish Ministry of Science, Innovation and Universities.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Watt-level green random laser at 532  nm by SHG of Yb-doped fiber laser

  • Rota Rodrigo, Sergio
  • Gouhier, B.
  • Dixneuf, C.
  • Antoni Micollier, L.
  • Guiraud, G.
  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
  • Traynor, N.
  • Santarelli, Giorgio
We have developed a Watt-level random laser at 532 nm. The laser is based on a 1064 nm random distributed ytterbium-gain assisted fiber laser seed with a 0.35 nm line-width and 900 mW polarized output power. A study for the optimal length of the random distributed mirror was carried out. An ytterbium-doped fiber master oscillator power amplifier architecture is used to amplify the random seeder laser without additional spectral broadening up to 20 W. By using a periodically poled lithium niobate(PPLN) crystal in a single pass configuration we generate in excess of 1 W random laser at 532 nm by second harmonic generation with an efficiency of 9%. The green random laser exhibits an instability <1%, optical signal to noise ratio >70 dB, 0.1 nm linewidth and excellent beam quality., Agence Nationale de la Recherche (ANR) (ANR14 LAB05 0002 01); Conseil Régional d’Aquitaine (2014–IR60309-00003281); Horizon 2020 Framework Programme (H2020) (Marie Sklodowska-Curie—748839); Lasers and Photonics in Aquitane (LAPHIA); Spanish Government (TEC 2016-76021-C2-1-R); AEI/FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Micro-drilled optical fiber for enhanced laser strain sensors

  • Pérez Herrera, Rosa Ana
  • Bravo Acha, Mikel
  • Roldán Varona, Pablo
  • Leandro González, Daniel
  • Rodríguez Cobo, Luis
  • López Higuera, José Miguel
  • López-Amo Sáinz, Manuel
In this work, we present an experimental measurement of temperature and strain sensitivities of a micro-drilled optical fiber (MDOF). The MDOF consisted of a quasi-randomly distributed reflector along a single mode fiber (SMF). A fiber cavity laser based on MDOF was experimentally studied, attaining a single-wavelength laser emission centered at 1568.6nm. The output power level obtained from this single-laser oscillation when pumped at 140mW was around - 9.6dBm, and an optical signal to noise ratio (OSNR) of around 45dB was measured. Although temperature sensitivities of fiber Bragg gratings used as sensors are similar to our MDOF, strain sensitivity is enhanced around one order of magnitude when the MDOF was used., This work was supported by the Spanish AEI TEC2016-76021-C2, FEDER Funds, and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Compact optical fiber lasers and optical fiber sensors assisted by femtosecond laser inscription of plane-by-plane FBGs

  • Roldán Varona, Pablo
  • Pallarés Aldeiturriaga, D.
  • Rodríguez Cobo, Luis
  • Pérez Herrera, Rosa Ana
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
  • López Higuera, José Miguel
Development of a high temperature sensor based on optical fiber l aser generated from a cavity of reduced dimensions (43 mm) in Er-doped fiber. The mirror FBGs have been inscribed with femtosecond laser using the slit beam technique (Pl-b-Pl)., This work has been supported by the project TEC2016-76021-C2-2-R (AEI/FEDER) of the Spanish government and FEDER funds, and by the grant FPU2018/02797 from the Spanish government.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

High sensitivity fiber-optic liquid level sensor using biconical tapered fibers

  • Júdez Colorado, Aitor
  • Leandro González, Daniel
  • Pérez Herrera, Rosa Ana
  • Galarza Galarza, Marko
  • López-Amo Sáinz, Manuel
Trabajo presentado a la 26th International Conference on Optical Fiber Sensors. Suiza, 2018, A liquid level sensor is presented using a biconical tapered standard single-mode fiber, being its main characteristic an outstanding sensitivity for a low cost transducer. Temperature compensation is enabled with the same interrogation equipment., This work was supported in part by the Spanish Comision Interministerial de Ciencia y Tecnología within project TEC2016-76021-C2-1-R, by the FEDER funds of EU, by the Agencia Estatal de Investigación within the project UNPN15-EE-3167 and by the Institute of Smart Cities by means of a postdoctoral fellowship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Random fiber lasers: application to fiber optic sensors networks

  • López-Amo Sáinz, Manuel
  • Leandro González, Daniel
  • Miguel Soto, Verónica de
  • Bravo Acha, Mikel
  • Fernández Vallejo, Montserrat
  • Pérez Herrera, Rosa Ana
Recently, random mirrors have been proposed as a method to create fiber laser cavities. This kind of cavity is based on cooperative Rayleigh scattering, which is generated along a fiber due to the material inhomogeneities presented in that fiber. In this work, basics of Random fiber lasers and different demonstrated lasing sensors systems for interrogating arrays of optical fiber sensors are shown. These systems use different kinds of amplification and cavities schemes and can interrogate optical fiber sensors located up to 225 km away., The authors would like to thank the financial support from Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2016-76021-C2-1-R and TEC2013-47264-C2-2-R, Campus Iberus and FEDER funds from the European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Title enhancement of the sensitivity of a volatile organic compounds MOF-sensor by means of its structure

  • López Torres, Diego
  • López Aldaba, Aitor
  • Elosúa Aguado, César
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
  • Arregui San Martín, Francisco Javier
Trabajo presentado en la Eurosensors 2017 Conference. París, 3–6 de septiembre de 2017., In this paper, we experimentally compare several core structures of Microstructured Optical Fibers (MOFs) for low-finesse Fabry-Pérot (FP) sensors. These sensors are designed for Volatile Organic Compounds (VOCs) measurements. We deposit Indium Tin Oxide (ITO) thin films by sputtering on the MOFs and different optical phase responses of the FP were measured for saturated atmospheres of ethanol. The sensitivity of the developed sensors is demonstrated to depend on the geometry and the dimensions of the MOF-cores. The sensors show recovery times under 100 s and the baselines are fully recovered after exposure to VOC., This work was supported by the research grant TEC2016-79367-C2-2-R and TEC 2016-76021-C2-1-R (AEI/FEDER, UE) as well as Public University of Navarre program PhD grants.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Study of optical fiber sensors for cryogenic temperature measurements

  • Miguel Soto, Verónica de
  • Leandro González, Daniel
  • López Aldaba, Aitor
  • Beato López, Juan Jesús
  • Pérez de Landazábal Berganzo, José Ignacio
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this work, the performance of five different fiber optic sensors at cryogenic temperatures has been analyzed. A photonic crystal fiber Fabry-Pérot interferometer, two Sagnac interferometers, a commercial fiber Bragg grating (FBG), and a -phase shifted fiber Bragg grating interrogated in In this work, the performance of five different fiber optic sensors at cryogenic temperatures has been analyzed. A photonic crystal fiber Fabry-Pérot interferometer, two Sagnac interferometers, a commercial fiber Bragg grating (FBG), and a π-phase shifted fiber Bragg grating interrogated in a random distributed feedback fiber laser have been studied. Their sensitivities and resolutions as sensors for cryogenic temperatures have been compared regarding their advantages and disadvantages. Additionally, the results have been compared with the given by a commercial optical backscatter reflectometer that allowed for distributed temperature measurements of a single mode fiber., Financial support from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R, Innocampus, Cost action MP1401 and the FEDER funds is acknowledged. Also the support of the Institute of Smart Cities by means of a postdoctoral fellowship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Sistema de interrogación multi-sensor basado en multiplexación en longitud de onda y tiempo, Multi-sensor interrogation system based on wavelength and time multiplexing

  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Pérez González, Asier
  • López-Amo Sáinz, Manuel
En este trabajo se propone un sistema de interrogación versátil y económico basada en la generación de pulsos empleando la modulación directa de diodos láser DFB. Se ha demostrado una resolución en longitud de onda de 1 pm para una separación de sensores de 600m. La validación del interrogador se ha llevado a cabo monitorizando una red de sensores de 26 km de longitud que incluye redes de difracción de Bragg, reflectores y un interferómetro Fabry-Pérot., This work proposes a versatile and cost-effective interrogation system based on pulses generation using direct modulated DFB laser diodes. A wavelength resolution of 1 pm is demonstrated for a 600 m sensor-spacing. A 26 km-long sensor network including fiber Bragg gratings, wideband reflectors and a Fabry-Pérot interferometer is used to validate the interrogator., Este trabajo ha sido financiado por los proyectos TEC2016-76021-C2 y PID2019-107270RB-C22, los fondos FEDER, la European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143, el contrato Beatriz Galindo BEAGAL18/00116 y las fundaciones 'Caja Navarra' y 'la Caixa' con el proyecto LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Linearly-configured BOCDA system with large modulation amplitude using dual-probe wave

  • Mariñelarena Ollacarizqueta, Jon
  • Kim, Yong Hyun
  • Loayssa Lara, Alayn
  • Song, Kwang Yong
We present and experimentally demonstrated a linearly-configured Brillouin optical correlation domain analysis (LC-BOCDA) system that allows large modulation amplitude (Δf) based on a dual probe wave and the control of correlation-order. The adoption of dual probe and the control of correlation-order can suppress the effects of two main origins of the noise - the Brillouin loss of the pump and the beat noise between the pump and probe waves. We experimentally confirm that Δf and the number of resolving points, N, can be increase to 1.8 times without significant noise., The authors wish to acknowledge the support from the Spanish Ministerio de Economía y Competitividad through the project TEC2016-76021-C2-1-R, FEDER funds and Universidad Publica de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

Development of new punctual optical fiber transducer for sensing

  • López Aldaba, Aitor
The international research community has been nurturing photonic technologies over the years, aiming to develop cost effective solutions for a number of applications. Optical fibers offer an efficient solution for sensing and communication fields. Fiber optic sensors present appealing characteristics that make them very attractive when compared with conventional electric sensors such as immunity to electromagnetic interferences, as well as unfavorable environments, small size, ability for multiplexing and remote sensing. Another important aspect when using optical fibers is the ability to simultaneously use them as sensors and communication channels. The primary motivation for this PhD work was the study and development of new structures based in photonic crystal fibers. The main idea was to take advantage of the know-how of our group in fiber-optic communications and photonic sensing, as well as the recent advances in the sensing area to develop new structures based on the platform of photonic crystal fibers., The work presented in this thesis was accomplished due to different financial supports, as well as co-work relationships inside of the university and outside during research times developed abroad. Due to the financial support obtained, thanks should be pay to: Spanish Government project TEC 2013-47264-C2-2-R; Innocampus and the INTERREG SUDOE Project “ECOAL-MGT-Ecological Management of Coal Waste Piles, SOE3/P2/P714”; As well as FEDER founds; Spanish Government project TEC 2016-76021-C2-1-R; Cost action MP1401;, Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Hybrid Raman‑erbium random fiber laser with a half open cavity assisted by artificially controlled backscattering fiber refectors

  • Pérez Herrera, Rosa Ana
  • Roldán Varona, Pablo
  • Galarza Galarza, Marko
  • Sañudo-Lasagabaster Ibáñez, Silvia
  • Rodríguez Cobo, Luis
  • López Higuera, José Miguel
  • López-Amo Sáinz, Manuel
A hybrid Raman-erbium random fber laser with a half-open cavity assisted by chirped artifcially controlled backscattering fber refectors is presented. A combination of a 2.4 km-long dispersion compensating fber with two highly erbium-doped fber pieces of 5 m length were used as gain media. A single random laser emission line centered at 1553.8 nm with an optical signal to noise ratio of 47 dB were obtained when pumped at 37.5 dBm. A full width at half maximum of 1 nm and a 100% confdence level output power instability as low as 0.08 dB were measured. The utilization of the new laser cavity as a temperature and strain sensor is also experimentally studied., This work was supported by the Ministerio de Economía y Competitividad of Spain (TEC2016-76021-C2), the Ministerio de Ciencia, Innovación y Universidades and Agencia Estatal de Investigación (PID2019-107270RB) and the FEDER funds, the Ministerio de Educación, Cultura y Deporte of Spain (PhD grant FPU2018/02797), and Projects for young researchers UPNA 2019 (PJUPNA1928).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Vertically coupled InP/InGaAsP microring lasers using a single epitaxial growth and singleside lithography

  • García López, Óscar
  • Thourhout, Dries Van
  • Verstuyft, Steven
  • López-Amo Sáinz, Manuel
  • Baets, Roel
  • Galarza Galarza, Marko
The experimental demonstration of vertical microring lasers requiring only one single epitaxial growth and two single-side lithographic steps is presented, in what is the simplest fabrication scheme for such devices published to date. The fabricated lasers show series resistance of around 20 Ω at forward bias, threshold currents at room temperature between 35 and 58 mA, and single-mode emission with a side-lobe suppression ratio higher than 30 dB. The measured optic output power level is of tens of microwatts. The approach allows the improvement of the optical features maintaining the simplicity of the manufacturing procedure., This work was supported by the Spanish Agencia Estatal de Investigación within project TEC2016-76021-C2-1-R, and FEDER funds of EU.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Comparison between capacitive and microstructured optical fiber soil moisture sensors

  • López Aldaba, Aitor
  • López Torres, Diego
  • Campo-Bescós, Miguel
  • López Rodríguez, José Javier
  • Yerro Lizarazu, David
  • Elosúa Aguado, César
  • Arregui San Martín, Francisco Javier
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
Soil moisture content has always been an important parameter to control because it is a deterministic factor for site-specific irrigation, seeding, transplanting, and compaction detection. In this work, a discrete sensor that is based on a SnO2–FP (Fabry-Pérot) cavity is presented and characterized in real soil conditions. As far as authors know, it is the first time that a microstructured optical fiber is used for real soil moisture measurements. Its performance is compared with a commercial capacitive soil moisture sensor in two different soil scenarios for two weeks. The optical sensor shows a great agreement with capacitive sensor’s response and gravimetric measurements, as well as a fast and reversible response; moreover, the interrogation technique allows for several sensors to be potentially multiplexed, which offers the possibility of local measurements instead of volumetric: it constitutes a great tool for real soil moisture monitoring., This work was supported by the Spanish Government projects TEC2016-76021-C2-1-R, TEC2016-78047-R, TEC2016-79367-C2-2-R, Innocampus and the Cost Action MP 1401, as well as to the AEI/FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Optical power-based interrogation of plasmonic tilted fiber Bragg grating biosensors

  • González Vila, Á.
  • López Aldaba, Aitor
  • Kinet, D.
  • Mégret, P.
  • López-Amo Sáinz, Manuel
  • Caucheteur, C.
Two interrogation techniques for plasmonic tilted fiber Bragg grating sensors are reported and experimentally tested. Typical interrogation methods are usually based on tracking the wavelength shift of the most sensitive cladding mode, but for biosensing applications, spectrometer-based methods can be replaced by more efficient solutions. The proposed techniques thus rely on the measurement of the induced changes in optical power. The first one consists of a properly polarized tunable laser source set to emit at the wavelength of the sensor most sensitive mode and an optical power meter to measure the transmitted response. For the second method, a uniform fiber Bragg grating is photo-inscribed beyond the sensor in such a way that its central wavelength matches the sensor most sensitive mode, acting as an optical filter. Using a LED source, light reflected backwards by this grating is partially attenuated when passing through the sensor due to plasmon wave excitation and the power changes are quantified once again with an optical power meter. A performance analysis of the techniques is carried out and they both result competitive interrogation solutions. The work thus focuses on the development of cost-effective alternatives for monitoring this kind of biosensors in practical situations., Á. González-Vila is supported by the F.R.S.-FNRS through a FRIA grant. C. Caucheteur is supported by the F.R.S.- FNRS. The authors would also like to thank the financial support from the ERC (European Research Council) Starting Independent Grant PROSPER (grant agreement No. 280161 – http://www.umons.ac.be/erc-prosper), from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2016-76021-C2-1-R and TEC2013-47264-C2-2- R and from SUDOE ECOAL-MGT and FEDER funds from the European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Quasi-distributed vibration sensing based on weak reflectors and STFT demodulation

  • Leandro González, Daniel
  • Zhu, Mengshi
  • López-Amo Sáinz, Manuel
  • Murayama, Hideaki
In this work, a new system is proposed for quasi-distributed vibration sensing based on the Doppler effect. The setup employs an optical frequency domain reflectometer (OFDR) and an array of weak reflectors. The short-time Fourier transform (STFT) is employed to obtain the spectrogram, then the demodulation process detects the frequency variation and compensates the accumulated response. In this manner, events occurring in the fiber segment between neighboring reflectors can be measured. The theoretical development of the approach is presented and demonstrated, evidencing the velocimeter operation of the technique. The setup has been proved in several tests under different perturbation conditions, evaluating the limitations and capabilities. This solution presents many advantages such as the ability to measure arbitrary perturbations, the linear response, high spatial-resolution, simplicity, high configurability or the low repetition rate required to detect kilohertz-frequency vibrations., This work was supported by a Fundación La Caixa postdoc and Talent Grant, the project AEI TEC-2016-76021-C2-1 and the FEDER funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Wavelength converter using a highly Er-doped optical fiber ring laser

  • Pérez Herrera, Rosa Ana
  • López-Amo Sáinz, Manuel
  • Rodríguez, Luis
  • Ventura Rípodas, Daniel
  • López Higuera, José Miguel
This work presents an all-fiber wavelength converter based on a highly Er-doped fiber laser, which has been experimentally demonstrated. Frequencies from several kilohertz up to tens of gigahertz have been investigated. Making use of the gain competition in the amplifying medium, the wavelength conversion can be carried out over not only one lasing wavelength, but over several. These analyses have also been carried out for more than one all-fiber ring structure, demonstrating the viability of this wavelength converter. To the best of our knowledge, this is the first time an Er-doped fiber wavelength converter has been validated., This work was supported by the Spanish Comisión Interministerial de Ciencia y Tecnología (CICYT TEC2013-47264-C2 and TEC2016-76021-C2) and FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Enhancement of the dynamic range in slope-assisted coherent brillouin optical time-domain analysis sensors

  • Mariñelarena Ollacarizqueta, Jon
  • Urricelqui Polvorinos, Javier
  • Loayssa Lara, Alayn
We present two techniques that provide an extension of the dynamic range of coherent Brillouin optical time-domain analysis (BOTDA) sensors for dynamic measurements. This type of BOTDA sensors rely on self-heterodyne detection of a phase-modulated probe wave and the dynamic range for fast measurements is limited to the linear region of the RF phase-shift spectrum measured. The first method for range extension that we introduce is based on launching pump pulses containing multiple frequency components. This makes the Brillouin spectra generated by each component to overlap, providing a wider linear region of the detected RF phase-shift spectrum and allowing to measure larger Brillouin frequency shift variations. The second method relies on shortening the length of the pump pulses, which leads to the broadening of the detected RF spectra. The theoretical fundamentals of both range enhancing techniques are presented. Moreover, we experimentally demonstrate that they provide a threefold to fourfold enhancement in the dynamic range. Finally, the factors limiting their performance are determined: for the multi-frequency pump pulse technique, it is the worsening of Kerr non-linear effects due to the simultaneous propagation of multiple spectral components in the fiber, and, for the pulse-shortening method, it is the signal-to-noise ratio penalty linked to the reduction of the magnitude of the Brillouin interaction., This work was supported in part by the Universidad Pública de Navarra, in part by the Feder funds, and in part by the Spanish Ministerio de Economía y Competitividad through Project TEC2013-47264-C2-2-R and Project TEC2016-76021-C2-1-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Ultra-long (275 km) random distributed feedback fiber laser for remote sensor monitoring

  • Miguel Soto, Verónica de
  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
Trabajo presentado a la 26th International Conference on Optical Fiber Sensors. Suiza, 2018, An interferometric sensor located 275 km away from the monitoring station has been interrogated by a double-pumped random distributed feedback fiber laser, reaching the longest distance in fiber optic remote sensing reported up to date., This work was supported in part by the Spanish Comision Interministerial de Ciencia y Tecnología within project TEC2016-76021-C2-1-R and by the Institute of Smart Cities by means of a postdoctoral fellowship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Liquid level sensor based on dynamic Fabry–Perot interferometers in processed capillary fiber

  • Roldán Varona, Pablo
  • Pérez Herrera, Rosa Ana
  • Rodríguez Cobo, Luis
  • Reyes González, Luis
  • López-Amo Sáinz, Manuel
In this work, a novel optical fiber sensor capable of measuring both the liquid level and its refractive index is designed, manufactured and demonstrated through simulations and experimentally. For this, a silica capillary hollow-core fiber is used. The fiber, with a sensing length of 1.55 mm, has been processed with a femtosecond laser, so that it incorporates four holes in its structure. In this way, the liquid enters the air core, and it is possible to perform the sensing through the Fabry–Perot cavities that the liquid generates. The detection mode is in reflection. With a resolution of 4 μm (liquid level), it is in the state of the art of this type of sensor. The system is designed so that in the future it will be capable of measuring the level of immiscible liquids, that is, liquids that form stratified layers. It can be useful to determine the presence of impurities in tanks., This work was supported by the Ministerio de Economía y Competitividad of Spain (TEC2016-76021-C2-1-R and TEC2016-76021-C2-2-R), the FEDER/Ministerio de Ciencia, Innovación y Universidades and Agencia Estatal de Investigación (PID2019-107270RB-C21 and PID2019-107270RB-C22), the Ministerio de Educación, Cultura y Deporte of Spain (PhD grant FPU2018/02797), and Projects for young researches UPNA 2019.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Latest research on long-range Brillouin distributed sensing

  • Loayssa Lara, Alayn
  • Urricelqui Polvorinos, Javier
  • Iribas Pardo, Haritz
  • Mariñelarena Ollacarizqueta, Jon
  • Mompó Roselló, Juan José
We review the latest developments in long-range Brillouin optical time-domain analysis sensors. The factors that impair the performance of these sensors, particularly in terms of their distance range, are discussed together with the latest methods to overcome them. We focus on our recent contributions based on the application of the probe dithering method, which is based on introducing a wavelength modulation to the probe wave. This technique is shown to effectively compensate nonlocal effects originated in the depletion of the pump pulse as well as of its pedestal. In addition, it can provide amplification to the pump wave with a slight modification of the setup. Furthermore, this method can be combined with pump pulse coding and a new technique for coding linearization that we have devised to further extend the sensing length into the hundreds of kilometers range., The authors wish to acknowledge the financial support of the Spanish Agencia Estatal de Investigacin through projects TEC2016- 76021-C2-1-R and RTC-2017-6239-3, FEDER funds, Gobierno de Navarra project 0011-1365- 2017-000122 and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Sensitivity optimization of a microstructured optical fiber ammonia gas sensor by means of tuning the thickness of a metal oxide nano-coating

  • López Torres, Diego
  • López Aldaba, Aitor
  • Elosúa Aguado, César
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this paper, the influence of the thickness of metallic-oxide coatings, ITO, and SnO2 on the sensitivity of a microstructured optical fiber Fabry–Pérot (FP) has been studied with the aim of developing ammonia gas fiber optic sensors. Also, the distribution of the optical power that can be coupled to the metallic-oxide sensing films is investigated in order to understand how the sensor’s sensitivity can be improved; the thickness of the coatings plays a relevant role on the sensitivity and response time. Films with thicknesses between 200 and 850 nm were experimentally examined resulting in an optimal thickness of 625 nm for a SnO2 film. The behavior of the sensors toward different concentrations of ammonia gas from 10 to 130 ppm was analyzed by measuring the phase shifts of the reflected signal using the fast Fourier transform of its optical spectrum. The registered response/recovery times of this sensor are below 90 s., This work was supported in part by the Ministerio de Economía y Ciencia (MINECO) of Spain within projects under Grant TEC2016-79367-C2-2-R and Grant TEC2016-76021-C2-1-R, in part by the FEDER funds from the European Union, and in part by the University Public of Navarre Program Ph.D grants
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Non-local effects in Brillouin optical time-domain analysis sensors

  • Iribas Pardo, Haritz
  • Urricelqui Polvorinos, Javier
  • Mompó Roselló, Juan José
  • Mariñelarena Ollacarizqueta, Jon
  • Loayssa Lara, Alayn
Brillouin optical time-domain analysis (BOTDA) sensors have great potential to provide distributed measurements of temperature and strain over large structures with high spatial resolution and measurement precision. However, their performance ultimately depends on the amount of probe and pump pulse power that can be injected into the sensing fiber, which determines the signal-to-noise ratio of the detected measurement signal. The probe wave power is constrained by the generation of noise induced by spontaneous Brillouin scattering and at lower power by the so-called non-local effects. In this work, we focus on the latter. We review the physical origins of non-local effects and analyze the performance impairments that they bring. In addition, we discuss the different methods that have been proposed to counteract these effects comparing their relative merits and ultimate performance. Particularly, we focus on a technique that we have devised to compensate non-local effects which is based on introducing an optical frequency modulation or dithering to the probe wave. This method is shown to provide a comprehensive solution to most of the impairments associated with non-local effects and also to enable some side benefits, such as amplification of the pump pulses to compensate the attenuation of the fiber., The authors wish to acknowledge the financial support of the Spanish Ministerio de Economía y Competitividad through the projects TEC2013-47264-C2-2-R and TEC2016- 76021-C2-1-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Enhancement of signal-to-noise ratio in Brillouin optical time domain analyzers by dual-probe detection

  • Iribas Pardo, Haritz
  • Loayssa Lara, Alayn
  • Sauser, Florian
  • Llera, Miguel
  • Le Floch, Sébastien
We demonstrate a simple technique to enhance the signal-to-noise ratio (SNR) in Brillouin optical time-domain analysis sensors by the addition of gain and loss processes. The technique is based on the shift of the pump pulse optical frequency in a double-sideband probe system, so that the gain and loss processes take place at different frequencies. In this manner, the loss and the gain do not cancel each other out, and it makes possible to take advantage of both informations at the same time, obtaining an improvement of 3 dB on the SNR. Furthermore, the technique does not need an optical filtering, so that larger improvement on SNR and a simplification of the setup are obtained. The method is experimentally demonstrated in a 101 km fiber spool, obtaining a measurement uncertainty of 2.6 MHz (2σ) at the worst-contrast position for 2 m spatial resolution. This leads, to the best of our knowledge, to the highest figure-of-merit in a BOTDA without using coding or raman amplification., The authors wish to acknowledge the financial support of the Spanish Ministerio de Economía y Competitividad through the projects TEC2013-47264- C2-2-R and TEC2016-76021-C2-1-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Cyclic coding for Brillouin optical time-domain analyzers using probe dithering

  • Iribas Pardo, Haritz
  • Loayssa Lara, Alayn
  • Sauser, Florian
  • Llera, Miguel
  • Le Floch, Sébastien
We study the performance limits of mono-color cyclic coding applied to Brillouin optical time-domain analysis (BOTDA) sensors that use probe wave dithering. BOTDA analyzers with dithering of the probe use a dual-probe-sideband setup in which an optical frequency modulation of the probe waves along the fiber is introduced. This avoids non-local effects while keeping the Brillouin threshold at its highest level, thus preventing the spontaneous Brillouin scattering from generating noise in the deployed sensing fiber. In these conditions, it is possible to introduce an unprecedented high probe power into the sensing fiber, which leads to an enhancement of the signal-to-noise ratio (SNR) and consequently to a performance improvement of the analyzer. The addition of cyclic coding in these set-ups can further increase the SNR and accordingly enhance the performance. However, this unprecedented probe power levels that can be employed result in the appearance of detrimental effects in the measurement that had not previously been observed in other BOTDA set-ups. In this work, we analyze the distortion in the decoding process and the errors in the measurement that this distortion causes, due to three factors: the power difference of the successive pulses of a code sequence, the appearance of first-order non-local effects and the non-linear amplification of the probe wave that results when using mono-color cyclic coding of the pump pulses. We apply the results of this study to demonstrate the performance enhancement that can be achieved in a long-range dithered dual-probe BOTDA. A 164-km fiber-loop is measured with 1-m spatial resolution, obtaining 3-MHz Brillouin frequency shift measurement precision at the worst contrast location. To the best of our knowledge, this is the longest sensing distance achieved with a BOTDA sensor using mono-color cyclic coding., H. Iribas and A. Loayssa wish to acknowledge the financial support of the Spanish Ministerio de Economía y Competitividad through the projects TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Polyaniline deposition on tilted fiber Bragg grating for pH sensing

  • López Aldaba, Aitor
  • González Vila, Á.
  • Debliquy, M.
  • López-Amo Sáinz, Manuel
  • Caucheteur, C.
  • Lahem, D.
In this paper, we present the results of a new pH sensor based on a polyaniline (PAni) coating on the surface of a tilted fiber Bragg grating. The pH-sensitive PAni was deposited by in situ chemical oxidative polymerization. The performance of the fabricated pH sensor was tested and the obtained pH values were compared with the results obtained using a pH meter device. It was found that the sensor exhibits response to pH changes in the range of 2-12, achieving a sensitivity of 46 pm/pH with a maximum error due to the hysteresis effect of ±1.14 pH. The main advantages of this PAni-TFBG pH sensor are biochemical compatibility, temperature independence, long-term stability and remote real-time multipoint sensing features. This type of sensor could be used for biochemical applications, pipeline corrosion monitoring or remote-multipoint measurements., Á. González-Vila is supported by the F.R.S.-FNRS through a FRIA grant. C. Caucheteur is supported by the F.R.S.- FNRS. The authors would also like to thank the financial support from the ERC (European Research Council) Starting Independent Grant PROSPER (grant agreement No. 280161 – http://www.umons.ac.be/erc-prosper), from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2016-76021-C2-1-R and TEC2013-47264-C2-2- R and from SUDOE ECOAL-MGT and FEDER funds from the European Union. The authors also acknowledge the financial support of CAPTINDOOR WBGREEN programs (Walloon Region of Belgium).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Gamma radiation measurements using an optical fiber laser

  • Pérez Herrera, Rosa Ana
  • Stancalie, Andrei
  • Cabezudo Sánchez-Valverde, Pablo Miguel
  • Sporea, Dan
  • Negut, Daniel
  • López-Amo Sáinz, Manuel
Trabajo presentado a la 26th International Conference on Optical Fiber Sensors. Suiza, 2020, A fiber ring laser cavity configuration was used to analyze the effect of gamma-irradiation over the performance of different types of erbium doped fibers. Preliminary results validates this method to monitor gamma-radiation in real time., Financial support from the Spanish Comisión Interministerial de Ciencia y Tecnología within project TEC2016- 76021-C2-1-R and FEDER funds from the European Union are acknowledged. The reported investigations were performed in the frame of the COST Action MP 1401.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

Contributions to the development of Brillouin distributed sensors for structural health monitoring

  • Mariñelarena Ollacarizqueta, Jon
The main objectives of this thesis is to contribute to the enhancement of the performance of distributed optical ber sensors (DOFS) based on stimulated Brillouin scattering (SBS) by analyzing their limitations and proposing solutions to overcome their current constraints. The dissertation has been focused on improving different aspects of dynamic and static Brillouin optical time-domain analysis (BOTDA) and Brillouin optical coherent-domain analysis (BOCDA) sensors. Moreover, this research work has tried to contribute to reduce the existing gap between the investigation of DOFS and their industrial applications, demonstrating the capability of these sensors to provide efficient and valuable measurements in real application scenarios. In particular, the objectives of this dissertation are: -Enhance the signal-to-noise ratio (SNR) constraints faced by of BOTDA sensors by proposing alternative setups or post-processing solutions to achieve better performance. -Analyze and study the dynamic self-heterodyne detection BOTDA sensor recently presented by our research group to try to improve its performance by proposing solutions to their constraints and alternative setups. -Research on the limitations of a particular single-ended access BOCDA sensor setup with the aim of enhancing its performance. -Design, develop and implement novel measuring systems to deploy the investigated DOFS in real applications and demonstrate their capabilities., Tesis financiada por la Universidad Pública de Navarra a través del programa de ayudas para la formación de personal investigador y ayudas a la movilidad; Ministerio de Economía y Competitividad a través de los proyectos TEC2013-47264-C2-2-R y TEC2016-76021-C2-1-R; y Gobierno de Navarra-Departamento de Desarrollo Económico por los proyectos I-SEN 0011-1365-2016-00069 y WINSOLAR 0011-1365-2017-000122., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Compensation of nonlocal effects induced by the extinction ratio of pump pulses in Brillouin optical time-domain analysis sensors

  • Mariñelarena Ollacarizqueta, Jon
  • Iribas Pardo, Haritz
  • Urricelqui Polvorinos, Javier
  • Loayssa Lara, Alayn
We demonstrate a technique to compensate the nonlocal effects that appear in Brillouin optical time-domain analysis sensors when pump pulses with limited extinction ratio are deployed. These recently discovered nonlocal effects are originated in the interaction between the probe wave and the pulse pedestal. Hence, their compensation method is based on deploying a modulation (dithering) of the optical frequency of the probe and pulse pedestal waves that provides a reduction of the effective interaction length between them. This is implemented by taking advantage of the chirp associated to the direct current modulation of a semiconductor laser used as common source for both waves. The net effect of this procedure is that the probe and pulse pedestal waves display efficient Brillouin interaction just at correlation peaks along the fiber where the frequency difference between both waves remains constant. Proof-of-concept experiments in a 25-km sensing link demonstrate the performance of the technique, where large errors of more than 10 MHz in the measurement of the Brillouin frequency shift are completely compensated by introducing a sinusoidal dithering to the laser source., Project TEC2016-76021-C2-1-R (AEI/FEDER,UE); Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Simultaneous strain and temperature multipoint sensor based on microstructured optical fiber

  • López Aldaba, Aitor
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this paper, a new sensor system for simultaneous and independent multipoint strain and temperature measurements is presented. The interrogation of the sensing heads has been carried out by monitoring their FFT phase variations. In particular, two of each microstructured optical fiber (M0F) cavity interference frequencies were used for the measures. This method is independent of the signal amplitude and also avoids the necessity of tracking the wavelength evolution in the spectrum, which can be a handicap when there are multiple interference frequency components with different sensitivities. The sensing heads present birefringent and multimodal properties and therefore both characteristics lead to their own interference with different properties and sensitivities. The multiplexing capability of the sensing heads and the interrogator method has also been tested and validated. Sensors were operated within a range of temperature 30°C-80°C and a deformation of ̴450 με was applied. Crosstalk between measurements can be corrected through simple math operations leading to independent and crosstalk-free multipoint and multiparameter sensors., This work was supported in part by the Spanish Comisi´on Interministerial de Ciencia y Tecnolog´ıa within projects TEC2016-76021-C2-1-R and TEC2013-47264-C2-2-R, in part by Cost action MP1401, and in part by FEDER funds from the European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Gamma radiation-induced effects over an optical fiber laser: towards new sensing applications

  • Pérez Herrera, Rosa Ana
  • Stancalie, Andrei
  • Cabezudo Sánchez-Valverde, Pablo Miguel
  • Sporea, Dan
  • López-Amo Sáinz, Manuel
In the present work, the effect of gamma radiation on the performance of different types of erbium-doped fibers (EDFs) when they are used in a fiber ring cavity (FRC) configuration is studied. Several pieces of commercial EDF are gamma-ray irradiated with different doses to evaluate the output power variations over time. The influence of different doses, from 150 Gy to 1000 Gy, over the output power level measurement and their amplified spontaneous emission (ASE) are experimentally evaluated both in the C and L bands. By using an FRC configuration we can detect the presence of gamma radiation. We can also estimate the irradiation doses applied to EDFs by measuring the slope of the short-term emission power., This work was supported in part from the Spanish AEI within project TEC2016-76021-C2-1-R, Innocampus, Projects for young researchers UPNA 2019 and FEDER funds from the European Union are acknowledged. The reported investigations were performed in the frame of the COST Action MP 1401. The Romanian authors acknowledge the financial support of the Romanian Ministry of Education and Research, under Romanian National Nucleu Program LAPLAS VI—Contract n. 16N/2019., This work was supported in part from the Spanish AEI within project TEC2016-76021-C2-1-R, Innocampus, Projects for young researchers UPNA 2019 and FEDER funds from the European Union are acknowledged. The reported investigations were performed in the frame of the COST Action MP 1401. The Romanian authors acknowledge the financial support of the Romanian Ministry of Education and Research, under Romanian National Nucleu Program LAPLAS VI—Contract n. 16N/2019.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Brillouin optical time-domain analyzer for extended sensing range using probe dithering and cyclic coding

  • Iribas Pardo, Haritz
  • Loayssa Lara, Alayn
  • Sauser, Florian
  • Llera, Miguel
  • Le Floch, Sébastien
We present an enhanced performance Brillouin optical time-domain analysis sensor that uses dual probes waves with optical frequency modulation and cyclic coding. The frequency modulation serves to increase the probe power that can be injected in the fiber before the onset of non-local effects and noise generated by spontaneous Brillouin scattering. This leads to higher detected signal-to-noise ratio (SNR), which is further increased by the coding gain. The enhanced SNR translates to extended range for the sensor, with experiments demonstrating 1-m spatial resolution over a 164 km fiber loop with a 3-MHz Brillouin frequency shift measurement precision at the worst contrast position. In addition, we introduce a study of the power limits that can be injected in the fiber with cyclic coding before the appearance of distortions in the decoded signal., The authors wish to acknowledge the financial support of the Spanish Ministerio de Economía y Competitividad through the projects TEC2013-47264- C2-2-R and TEC2016-76021-C2-1-R, FEDER funds and the UPNA.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Second-order nonlocal effects mitigation in Brillouin optical time-domain analysis sensors by tracking the Brillouin frequency shift profile of the fiber

  • Mompó Roselló, Juan José
  • Iribas Pardo, Haritz
  • Urricelqui Polvorinos, Javier
  • Loayssa Lara, Alayn
We report on an additional limitation that has been found in Brillouin optical time-domain analysis (BOTDA) sensors due to the so-called second-order nonlocal effects (NLE). Second-order NLE appear in BOTDA setups that deploy a double probe waves to compensate the transfer of energy between the pump pulse and the probe wave, and are related to a spectral distortion of the pump pulse that leads to measurement errors and an effective limit on the maximum probe power that can be deployed in the sensor. We theoretically and experimentally demonstrate that the techniques that have been presented so far in the literature to compensate second-order NLE are only effective in the case that the Brillouin frequency shift (BFS) along the sensing fiber is uniform. However, this requirement for uniformity is not realistic in real world scenarios in which a variety of fibers with different BFS and subjected to different environmental conditions are typically deployed. Therefore, we demonstrate a new method to mitigate the effects of BFS variation in the BOTDA setups that compensate second-order NLE. This method is based on introducing an additional wavelength modulation to the probe wave so as to track the mean BFS changes along the sensing fiber link. With this method, we demonstrate a BOTDA setup that, without coding, distributed amplification, or any other form of performance enhancement, achieves a sensing length of 120 km with 3-m spatial resolution and 2-MHz measurement precision. Moreover, the setup demonstrates, to our knowledge, the largest probe power ever injected in a BOTDA sensing link., This work was supported by the Universidad Pública de Navarra, Feder funds and Spanish Ministerio de Economía y Competitividad through the project TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Simultaneous and quasi-independent strain and temperature sensor based on microstructured optical fiber

  • López Aldaba, Aitor
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this paper, a new sensor system for simultaneous and quasi-independent strain and temperature measurements is presented. The interrogation of the sensing head has been carried out by monitoring the FFT phase variations of two of the microstructured optical fiber (MOF) cavity interference frequencies. This method is independent of the signal amplitude and also avoids the need to track the wavelength evolution in the spectrum, which can be a handicap when there are multiple interference frequency components with different sensitivities. The sensor is operated within a range of temperature of 30°C-75°C, and 380µɛ of maximum strain were applied; being the sensitivities achieved of 127.5pm/°C and -19.1pm/µɛ respectively. Because the system uses an optical interrogator as unique active element, the system presents a cost-effective feature., Financial support from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2016-76021- C2-1-R, TEC2013-47264-C2-2-R and SUDOE ECOAL-MGT and FEDER funds from the European Union is acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Simultaneous temperature and vibration monitoring using an all-PM fiber loop mirror interferometer

  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
In this work, an all-polarization maintaining fiber loop mirror interferometer is presented and validated as vibration and temperature sensor without crosstalk between measurands. The system is entirely built using polarization-maintaining (PM) fiber and a PM optical coupler. As a consequence, no polarization controllers are needed in the cavity, significantly simplifying the operation of the system and improving the stability and accuracy of the measurements. The loop comprises three PM fiber sections appropriately fused with an angle offset between them. In this manner, the interference is maximized and the sensing contributions of the two PM fibers used as communications channels are suppressed. The third PM fiber is used as the sensor itself, simultaneously monitoring temperature and mechanical vibration up to 1.2 kHz by means of an interrogation technique based on fast Fourier transform., Financial support from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2013-47264- C2-2-R and TEC2016-76021-C2-1-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Single longitudinal mode lasers by using artificially controlled backscattering erbium doped fibers

  • Pérez Herrera, Rosa Ana
  • Roldán Varona, Pablo
  • Rodríguez Cobo, Luis
  • López Higuera, José Miguel
  • López-Amo Sáinz, Manuel
In this work, we propose and experimentally demonstrate a new distributed short linear cavity fiber laser. At one of the cavity ends, fabricated by a commercial femtosecond fiber laser chirped pulse amplfier, an artificially controlled backscattering erbium doped fiber section has been connected. This distributed reflector acts also as a saturable absorber, leading to the generation of tunable and switchable single longitudinal-mode laser emissions. The distributed reflector consists of 9 micro-drilled sections of about 1cm each one and randomly spread throughout 2 meters of highly doped erbium fiber. The total length of the fiber laser is 9.5 m and the laser shows a single mode behavior at all the emitted wavelengths. Using this new kind of reflecting saturable absorber, single and multiple single-mode emissions can be obtained. The achieved laser presents a pump threshold as low as 45 mW and shows up to 8 different single-mode emission lines with an optical signal to noise ratio of 45dB., This work was supported in part by the MINECO/AEI (Ministerio de Economía y Competitividad/Agencia Estatal de Investigación), Spain, under Grant TEC2016-76021-C2-1-R, Grant TEC2016-76021-C2-2-R, and Grant PID2019-107270RB; in part by the Ministerio de Educación, Cultura y Deporte of Spain under Grant FPU2018/02797, and in part by the Projects for Young Researches UPNA 2019 (Universidad Publica de Navarra) and FEDER Funds (European Regional Development Fund).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Distributed dynamic strain sensing via perfect periodic coherent codes and a polarization diversity receiver

  • Mompó Roselló, Juan José
  • Shiloh, Lihi
  • Arbel, Nadav
  • Levanon, Nadav
  • Loayssa Lara, Alayn
  • Eyal, Avishay
Rayleigh scattering-based dynamic strain sensing with high spatial resolution, fast update rate, and high sensitivity is highly desired for applications such as structural health monitoring and shape sensing. A key issue in dynamic strain sensing is the tradeoff between spatial resolution and the Signal-to-Noise Ratio (SNR). This tradeoff can be greatly relaxed with the use of coding. A sequence of optical pulses is injected into the fiber and the detected backscattered signal is cross correlated with the original signal. With the use of coding, SNR is indeed improved, but if the sequence is not well chosen, the resulting Peak to Sidelobe Ratio (PSR) can be rather low. An excellent choice of codes are biphase Legendre sequences which offer near Perfect Periodic Autocorrelation (PPA). Other common issues in Rayleigh scattering-based sensing techniques are signal fading and dynamic range. The former issue can occur due to destructive interference between lightwaves that are scattered from the same spatial resolution cell and, in coherent detection schemes, when the polarization states of the backscattered light and the reference light are mismatched. The latter issue is a concern in phase sensitive schemes which require signal jumps not to exceed 2π. In this paper, a biphase Legendre sequence with 6211 pulses is used in conjunction with polarization diversity scheme and a PM fiber. The setup provides two independent measurements of the sensing fiber complex profile and achieves highly sensitive, distributed dynamic strain sensing with very low probability of fading. In addition, the system can handle both very large perturbation signals and very small perturbation signals. The system operated at a scan rate of ∼107 kHz and achieved spatial resolution of ∼10 cm and sensitivity of ∼1.1mrad/√ Hz. The ratio between the powers of the maximum and minimum excitations that can be measured by the system is 136 dB., This work was supported in part by the Israeli Ministry of Science and Technology and in part by Universidad Pública de Navarra, Feder Funds, and Spanish Ministerio de Economía y Competitividad through the Project TEC2016-76021-1R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Comparison between different structures of suspended-core microstructured optical fibers for volatiles sensing

  • López Torres, Diego
  • López Aldaba, Aitor
  • Elosúa Aguado, César
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
  • Arregui San Martín, Francisco Javier
In this paper, different core structures of microstructured optical fibers (MOFs) for low-finesse Fabry-Perot (FP) sensors are experimentally compared to get the highest sensitivity. These devices are designed for volatile organic compounds (VOCs) measurements. Indium tin oxide (ITO) thin films were deposited by sputtering on the MOFs and different optical fast Fourier transform (FFT) phase responses from the FP were measured for saturated atmospheres of ethanol. It has been demonstrated that the sensitivities of the developed sensors depend strongly on the geometry and the dimensions of the MOF-cores. The sensors show recovery times shorter than 100 s and the baselines are fully recovered after every exposure to ethanol vapors., This research was funded by the financial support of MINECO (Spain) through TEC2016-79367-C2-2-R and TEC 2016-76021-C2-1-R as well as the FEDER funds and Public University of Navarre program PhD grants.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Spatial-frequency multiplexing of high-sensitivity liquid level sensors based on multimode interference micro-fibers

  • Galarza Galarza, Marko
  • Pérez Herrera, Rosa Ana
  • Leandro González, Daniel
  • Júdez Colorado, Aitor
  • López-Amo Sáinz, Manuel
This paper shows a new fiber optic sensor multiplexed system for liquid level sensing. Biconical fibertapers converging at a 40 mm-long micro-fiber are used as transducers. The tapers are designed to providethe propagation of the two main cylindrical modes in the micro-fiber avoiding higher order modes ormodes with other symmetries. The liquid level is calculated in real time from the measurement of thefrequency and phase components of the spectral interference pattern of the submerged micro-fiber.The system is fully characterized by theoretical simulations in terms of the sensitivity as a function ofthe most responsive parameter, which is the width of the micro-fiber. Phase sensibilities of 3.7 rad/mmare experimentally obtained and values as high as 11.4 rad/mm are theoretically predicted. The strongdependence of the spatial frequency with the width of the micro-fiber has been used to multiplex threesensors in series in this domain. The maximum detected crosstalk between sensors is 0.2 rad/mm., This work was supported by the Spanish Agencia Estatal de investigación within projects TEC2016-76021-C2-1-R, and UNPN15-EE-3167, by the FEDER funds of EU and by the Institute of Smart Cities by means of a postdoctoral fellowship.