Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Automatic detection of moistures in different construction materials from thermographic images

  • Garrido González, Iván
  • Lagüela López, Susana
  • Sfarra, Stefano
  • Madruga, F. J.
  • Arias Sánchez, Pedro
Moisture is a pathology that damages all type of construction materials, from materials of building envelopes to materials of bridges. Its presence can negatively affect the users’ conditions of indoor comfort. Furthermore, heating and cooling energy demand can be increased by the presence of moist materials. Infrared thermography (IRT) is a common technique in the scientific field to detect moisture areas, because of its non-destructive, non-contact nature. In addition, IRT allows an earlier moisture detection compared to the analysis using visible images. In order to optimize thermographic inspections, this paper presents one of the first methodologies for the automatic detection of moisture areas affecting the surface of construction materials. The methodology is based on the application of visible image processing techniques adapted to thermographic images through the consideration of an image conversion format, a thermal criterion and a thermal and a geometric filter. The precision, recall and F-score parameters obtained are around 83.5%, 73.5% and 72.5%, respectively, considering the false positives/negatives through a series of 12 tests made in different construction materials and ambient conditions, comparing the preliminary results with existing methodologies., Ministerio de Economía y Competitividad | Ref. FPU16/03950, Ministerio de Economía y Competitividad | Ref. TEC2016-76021-C2-2-R, Universidad de Salamanca. Cátedra Iberdrola VIII Centenario
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A microwave polarimeter demonstrator for astronomy with near-infra-red up-conversion for optical correlation and detection

  • Casas-Reinares, F. J.
  • Ortiz, David
  • Aja, Beatriz
  • Fuente, Luisa de la
  • Artal, Eduardo
  • Ruiz, Rubén
  • Mirapeix, Jesús M.
This paper presents a 10 to 20 GHz bandwidth microwave polarimeter demonstrator, based on the implementation of a near-infra-red frequency up-conversion stage that allows both the optical correlation, when operating as a synthesized-image interferometer, and signal detection, when operating as a direct-image instrument. The proposed idea is oriented towards the implementation of ultra-sensitive instruments presenting several dozens or even thousands of microwave receivers operating in the lowest bands of the cosmic microwave background. In this work, an electro-optical back-end module replaces the usual microwave detection stage with Mach–Zehnder modulators for the frequency up-conversion, and an optical stage for the signals correlation and detection at near-infra-red wavelengths (1550 nm). As interferometer, the instrument is able to correlate the signals of large-format instruments, while operating as a direct imaging instrument also presents advantages in terms of the possibility of implementing the optical back end by means of photonic integrated circuits to achieve reductions in cost, weight, size, and power consumption. A linearly polarized input wave, with a variable polar angle, is used as a signal source for laboratory tests. The receiver demonstrator has proved its capabilities of being used as a new microwave-photonic polarimeter for the study of the lowest bands of cosmic microwave background., The authors would like to thank Spanish Ministry for Economy and Competitiveness (currently Ministry of Science, innovation and Universities) for the financial support provided under the projects with references ESP2015-70646-C2-1-R, AYA2015-72768-EXP, ESP2017-83921-C2-1-R, TEC2013-47264-C2-1-R,TEC2016-76021-C2-2-R and CIBERBBN all co-financed with EU FEDER funds., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

In-field torsion measurements on solar trackers using fiber optic sensors

  • Leandro González, Daniel
  • Bravo Acha, Mikel
  • Júdez Colorado, Aitor
  • Mariñelarena Ollacarizqueta, Jon
  • Falcone Lanas, Francisco
  • Loayssa Lara, Alayn
  • López-Amo Sáinz, Manuel
  • Jiménez, S.
  • Achaerandio, Álvaro
In-field torsion measurements on solar trackers using fiber Bragg gratings are presented. 45 FBG sensors have been deployed in an operational solar energy plant to study the mechanical response of the structure to wind., This work was supported by the Gobierno de Navarra project WINDSOLAR (0011-1365-2017-000122), the Spanish AEI project TEC2016-76021-C2, FEDER Funds, ISC talent grant, and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Medida de torsión en seguidores solares con sensores de fibra óptica, Torsion measurements on solar trackers using fiber optic sensors

  • Leandro González, Daniel
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
  • Loayssa Lara, Alayn
  • Júdez Colorado, Aitor
  • Mariñelarena Ollacarizqueta, Jon
  • Falcone Lanas, Francisco
  • Jiménez Romero, Sergio
  • Moriana García, Iñaki
En este trabajo se ha monitorizado la torsión sufrida por una estructura de seguidores solares empleando sensores de fibra óptica. Estas medidas de campo se han obtenido con una red de sensores formada por 45 redes de difracción de Bragg en una huerta solar activa. Estos resultados, correlados con la velocidad y dirección del viento permitirían aumentar la eficiencia de los seguidores y ayudar a entender y prevenir efectos negativos relacionados con inestabilidades aeroelásticas., In this work, the torsion experienced by set of solar trackers is monitored using fiber optic sensors. The in-field measurements were obtained using a sensor network comprising 45 fiber Bragg gratings in an active solar plant. These results, correlated with wind speed and direction could increase efficiency and lead to understand and prevent harmful effects related to aeroelastic instability events., Este trabajo ha sido financiado por el proyecto WINDSOLAR (0011-1365-2017-000122) del Gobierno de Navarra, los proyectos TEC2016-76021-C2 y PID2019-107270RB-C22, los fondos FEDER, la European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143 y las fundaciones 'Caja Navarra' y 'la Caixa' con el proyecto LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

WDM and TDM interrogation by sequentially pulsing direct modulated DFBs

  • Pérez González, Asier
  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Pérez Herrera, Rosa Ana
  • López-Amo Sáinz, Manuel
A new versatile and cost-effective interrogation system by pulsing direct modulated (DM) DFB laser diodes is proposed. 1 pm wavelength resolution and 600 m sensor spacing is demonstrated by sequentially pulsing a DM DFB., This work was supported by the Spanish AEI project TEC2016-76021-C2-01, FEDER Funds, and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143 and the institute of Smart Cities (UPNA) talent grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Effects of pump pulse extinction ratio in Brillouin optical time-domain analysis sensors

  • Iribas Pardo, Haritz
  • Mariñelarena Ollacarizqueta, Jon
  • Feng, Cheng
  • Urricelqui Polvorinos, Javier
  • Schneider, Thomas
  • Loayssa Lara, Alayn
We report on two previously unknown non-local effects that have been found to impair Brillouin optical time-domain analysis (BOTDA) sensors that deploy limited extinction ratio (ER) pump pulses. The first one originates in the increased depletion of the pedestal of the pump pulses by the amplified probe wave, which in turn entails a reduced amplification of the probe and a measurement distortion. The second effect is due to the interplay between the transient response of the erbium-doped fiber amplifiers (EDFA) that are normally deployed to amplify the pump and the pedestal of the pump pulses. The EDFA amplification modifies the pedestal that follows the pulses in such a way that it also leads to a distortion of the measured gain spectra after normalization. Both effects are shown to lead to non-local effects in the measurements that have similar characteristics to those induced by pump pulse depletion. In fact, the total depletion factor for calculations of the Brillouin frequency shift (BFS) error in BOTDA sensors is shown to be the addition of the depletion factors linked to the pump pulse as well as the pedestal. A theoretical model is developed to analyze both effects by numerical simulation. Furthermore, the effects are investigated experimentally in long-range BOTDA sensors. The pedestal depletion effect is shown to severely constrain the probe power as well as the minimum ER of the pulses that can be deployed in BOTDA sensors. For instance, it is shown that, in a long-range dual-probe BOTDA, an ER higher that 32-dB, which is above that provided by standard electro-optic modulators (EOM), is necessary to be able to deploy a probe power of -3 dBm, which is the theoretical limit for that type of sensors. Even more severe can be the limitation due to the depletion effect induced by the EDFA transient response. It is found that the impairments brought by this effect are independent of the probe power, hence setting an ultimate limit for the BOTDA sensor performance. Experimentally, a long-range BOTDA deploying a 26-dB ER EOM and a conventional EDFA is shown to exhibit a BFS error higher than 1 MHz even for very small probe power., Spanish Ministerio de Economía y Competitividad (TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R); FEDER funds; Universidad Pública de Navarra; German Research Foundation (DFG SCHN 716/13-1).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Detrimental effects in Brillouin distributed sensors caused by EDFA transient

  • Feng, Cheng
  • Iribas Pardo, Haritz
  • Mariñelarena Ollacarizqueta, Jon
  • Schneider, Thomas
  • Loayssa Lara, Alayn
We investigate the deleterious effect and the error in Brillouin optical time-domain analyzers induced by the combination of a low extinction ratio pulse generation with the transient behavior of erbium-doped fiber amplifiers., The authors wish to acknowledge the financial support of the German Research Foundation (DFG SCHN 716/13-1), Spanish Ministerio de Economía y Competitividad (TEC2016-76021-C2-1-R, TEC2013-47264-C2-2-R) and FEDER.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Traffic monitoring based on FBG sensor arrays in asphalt structures

  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Bravo Acha, A.
  • Bravo Navas, M.
  • Mitxelena, J. R.
  • Martínez Mazo, J. J.
  • Camarero, E.
  • López-Amo Sáinz, Manuel
We evaluate the capabilities of optical fiber sensors to measure traffic flow, speed, weight estimation and pavement degradation. The proper operation of the system has been proved 3.5 years after the installation in a metropolitan road., This work was supported by the Spanish AEI project TEC2016-76021-C2, FEDER Funds, and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143 and the institute of Smart Cities (UPNA) talent grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Distributed humidity sensor for moisture-front monitoring in soils

  • Leandro González, Daniel
  • Delgado Zabala, Oihane
  • López Rodríguez, José Javier
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
In this contribution, high spatial resolution distributed humidity sensing was demonstrated for moisture-front monitoring in soils by using polyimide coated optical fiber., This work was supported by the Spanish AEI project TEC2016-76021-C2, FEDER Funds, and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Multiparameter sensor based on a multiinterferometric serial configuration for temperature and strain measurements

  • Pérez Herrera, Rosa Ana
  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Novais, Susana
  • Pradas Martínez, Javier
  • López-Amo Sáinz, Manuel
In this work, a multi-parameter point sensor based on the combination of Fabry-Perot (FP) and the anti-resonant (AR) reflecting guidance in cascade configuration is proposed and experimentally demonstrated. This structure, based on FP interference and AR reflecting guidance, was fabricated with two different air micro-cavities. The attained experimental results showed different strain and temperature sensitivities for the antiresonance contribution. However, when analyzing the FP interference, only strain sensitivity was observed, demonstrating that this air micro-cavity was also insensitive to temperature variations., This work was supported by the Spanish AEI projects TEC2016-76021-C2 and PID2019-107270RB-C22, FEDER Funds, the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 838143, Projects for young researches UPNA 2019, “Caja Navarra” and “la Caixa” foundations under agreement LCF/PR/PR13/51080004 and the grant BGP18/00180 of the “Beatriz Galindo” programme from the Spanish Ministry of Science, Innovation and Universities.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Compact optical fiber lasers and optical fiber sensors assisted by femtosecond laser inscription of plane-by-plane FBGs

  • Roldán Varona, Pablo
  • Pallarés Aldeiturriaga, D.
  • Rodríguez Cobo, Luis
  • Pérez Herrera, Rosa Ana
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
  • López Higuera, José Miguel
Development of a high temperature sensor based on optical fiber l aser generated from a cavity of reduced dimensions (43 mm) in Er-doped fiber. The mirror FBGs have been inscribed with femtosecond laser using the slit beam technique (Pl-b-Pl)., This work has been supported by the project TEC2016-76021-C2-2-R (AEI/FEDER) of the Spanish government and FEDER funds, and by the grant FPU2018/02797 from the Spanish government.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Sistema de interrogación multi-sensor basado en multiplexación en longitud de onda y tiempo, Multi-sensor interrogation system based on wavelength and time multiplexing

  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Pérez González, Asier
  • López-Amo Sáinz, Manuel
En este trabajo se propone un sistema de interrogación versátil y económico basada en la generación de pulsos empleando la modulación directa de diodos láser DFB. Se ha demostrado una resolución en longitud de onda de 1 pm para una separación de sensores de 600m. La validación del interrogador se ha llevado a cabo monitorizando una red de sensores de 26 km de longitud que incluye redes de difracción de Bragg, reflectores y un interferómetro Fabry-Pérot., This work proposes a versatile and cost-effective interrogation system based on pulses generation using direct modulated DFB laser diodes. A wavelength resolution of 1 pm is demonstrated for a 600 m sensor-spacing. A 26 km-long sensor network including fiber Bragg gratings, wideband reflectors and a Fabry-Pérot interferometer is used to validate the interrogator., Este trabajo ha sido financiado por los proyectos TEC2016-76021-C2 y PID2019-107270RB-C22, los fondos FEDER, la European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143, el contrato Beatriz Galindo BEAGAL18/00116 y las fundaciones 'Caja Navarra' y 'la Caixa' con el proyecto LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Quasi-distributed vibration sensing based on weak reflectors and STFT demodulation

  • Leandro González, Daniel
  • Zhu, Mengshi
  • López-Amo Sáinz, Manuel
  • Murayama, Hideaki
In this work, a new system is proposed for quasi-distributed vibration sensing based on the Doppler effect. The setup employs an optical frequency domain reflectometer (OFDR) and an array of weak reflectors. The short-time Fourier transform (STFT) is employed to obtain the spectrogram, then the demodulation process detects the frequency variation and compensates the accumulated response. In this manner, events occurring in the fiber segment between neighboring reflectors can be measured. The theoretical development of the approach is presented and demonstrated, evidencing the velocimeter operation of the technique. The setup has been proved in several tests under different perturbation conditions, evaluating the limitations and capabilities. This solution presents many advantages such as the ability to measure arbitrary perturbations, the linear response, high spatial-resolution, simplicity, high configurability or the low repetition rate required to detect kilohertz-frequency vibrations., This work was supported by a Fundación La Caixa postdoc and Talent Grant, the project AEI TEC-2016-76021-C2-1 and the FEDER funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Latest research on long-range Brillouin distributed sensing

  • Loayssa Lara, Alayn
  • Urricelqui Polvorinos, Javier
  • Iribas Pardo, Haritz
  • Mariñelarena Ollacarizqueta, Jon
  • Mompó Roselló, Juan José
We review the latest developments in long-range Brillouin optical time-domain analysis sensors. The factors that impair the performance of these sensors, particularly in terms of their distance range, are discussed together with the latest methods to overcome them. We focus on our recent contributions based on the application of the probe dithering method, which is based on introducing a wavelength modulation to the probe wave. This technique is shown to effectively compensate nonlocal effects originated in the depletion of the pump pulse as well as of its pedestal. In addition, it can provide amplification to the pump wave with a slight modification of the setup. Furthermore, this method can be combined with pump pulse coding and a new technique for coding linearization that we have devised to further extend the sensing length into the hundreds of kilometers range., The authors wish to acknowledge the financial support of the Spanish Agencia Estatal de Investigacin through projects TEC2016- 76021-C2-1-R and RTC-2017-6239-3, FEDER funds, Gobierno de Navarra project 0011-1365- 2017-000122 and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Non-local effects in Brillouin optical time-domain analysis sensors

  • Iribas Pardo, Haritz
  • Urricelqui Polvorinos, Javier
  • Mompó Roselló, Juan José
  • Mariñelarena Ollacarizqueta, Jon
  • Loayssa Lara, Alayn
Brillouin optical time-domain analysis (BOTDA) sensors have great potential to provide distributed measurements of temperature and strain over large structures with high spatial resolution and measurement precision. However, their performance ultimately depends on the amount of probe and pump pulse power that can be injected into the sensing fiber, which determines the signal-to-noise ratio of the detected measurement signal. The probe wave power is constrained by the generation of noise induced by spontaneous Brillouin scattering and at lower power by the so-called non-local effects. In this work, we focus on the latter. We review the physical origins of non-local effects and analyze the performance impairments that they bring. In addition, we discuss the different methods that have been proposed to counteract these effects comparing their relative merits and ultimate performance. Particularly, we focus on a technique that we have devised to compensate non-local effects which is based on introducing an optical frequency modulation or dithering to the probe wave. This method is shown to provide a comprehensive solution to most of the impairments associated with non-local effects and also to enable some side benefits, such as amplification of the pump pulses to compensate the attenuation of the fiber., The authors wish to acknowledge the financial support of the Spanish Ministerio de Economía y Competitividad through the projects TEC2013-47264-C2-2-R and TEC2016- 76021-C2-1-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Enhancement of signal-to-noise ratio in Brillouin optical time domain analyzers by dual-probe detection

  • Iribas Pardo, Haritz
  • Loayssa Lara, Alayn
  • Sauser, Florian
  • Llera, Miguel
  • Le Floch, Sébastien
We demonstrate a simple technique to enhance the signal-to-noise ratio (SNR) in Brillouin optical time-domain analysis sensors by the addition of gain and loss processes. The technique is based on the shift of the pump pulse optical frequency in a double-sideband probe system, so that the gain and loss processes take place at different frequencies. In this manner, the loss and the gain do not cancel each other out, and it makes possible to take advantage of both informations at the same time, obtaining an improvement of 3 dB on the SNR. Furthermore, the technique does not need an optical filtering, so that larger improvement on SNR and a simplification of the setup are obtained. The method is experimentally demonstrated in a 101 km fiber spool, obtaining a measurement uncertainty of 2.6 MHz (2σ) at the worst-contrast position for 2 m spatial resolution. This leads, to the best of our knowledge, to the highest figure-of-merit in a BOTDA without using coding or raman amplification., The authors wish to acknowledge the financial support of the Spanish Ministerio de Economía y Competitividad through the projects TEC2013-47264- C2-2-R and TEC2016-76021-C2-1-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Cyclic coding for Brillouin optical time-domain analyzers using probe dithering

  • Iribas Pardo, Haritz
  • Loayssa Lara, Alayn
  • Sauser, Florian
  • Llera, Miguel
  • Le Floch, Sébastien
We study the performance limits of mono-color cyclic coding applied to Brillouin optical time-domain analysis (BOTDA) sensors that use probe wave dithering. BOTDA analyzers with dithering of the probe use a dual-probe-sideband setup in which an optical frequency modulation of the probe waves along the fiber is introduced. This avoids non-local effects while keeping the Brillouin threshold at its highest level, thus preventing the spontaneous Brillouin scattering from generating noise in the deployed sensing fiber. In these conditions, it is possible to introduce an unprecedented high probe power into the sensing fiber, which leads to an enhancement of the signal-to-noise ratio (SNR) and consequently to a performance improvement of the analyzer. The addition of cyclic coding in these set-ups can further increase the SNR and accordingly enhance the performance. However, this unprecedented probe power levels that can be employed result in the appearance of detrimental effects in the measurement that had not previously been observed in other BOTDA set-ups. In this work, we analyze the distortion in the decoding process and the errors in the measurement that this distortion causes, due to three factors: the power difference of the successive pulses of a code sequence, the appearance of first-order non-local effects and the non-linear amplification of the probe wave that results when using mono-color cyclic coding of the pump pulses. We apply the results of this study to demonstrate the performance enhancement that can be achieved in a long-range dithered dual-probe BOTDA. A 164-km fiber-loop is measured with 1-m spatial resolution, obtaining 3-MHz Brillouin frequency shift measurement precision at the worst contrast location. To the best of our knowledge, this is the longest sensing distance achieved with a BOTDA sensor using mono-color cyclic coding., H. Iribas and A. Loayssa wish to acknowledge the financial support of the Spanish Ministerio de Economía y Competitividad through the projects TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Compensation of nonlocal effects induced by the extinction ratio of pump pulses in Brillouin optical time-domain analysis sensors

  • Mariñelarena Ollacarizqueta, Jon
  • Iribas Pardo, Haritz
  • Urricelqui Polvorinos, Javier
  • Loayssa Lara, Alayn
We demonstrate a technique to compensate the nonlocal effects that appear in Brillouin optical time-domain analysis sensors when pump pulses with limited extinction ratio are deployed. These recently discovered nonlocal effects are originated in the interaction between the probe wave and the pulse pedestal. Hence, their compensation method is based on deploying a modulation (dithering) of the optical frequency of the probe and pulse pedestal waves that provides a reduction of the effective interaction length between them. This is implemented by taking advantage of the chirp associated to the direct current modulation of a semiconductor laser used as common source for both waves. The net effect of this procedure is that the probe and pulse pedestal waves display efficient Brillouin interaction just at correlation peaks along the fiber where the frequency difference between both waves remains constant. Proof-of-concept experiments in a 25-km sensing link demonstrate the performance of the technique, where large errors of more than 10 MHz in the measurement of the Brillouin frequency shift are completely compensated by introducing a sinusoidal dithering to the laser source., Project TEC2016-76021-C2-1-R (AEI/FEDER,UE); Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Brillouin optical time-domain analyzer for extended sensing range using probe dithering and cyclic coding

  • Iribas Pardo, Haritz
  • Loayssa Lara, Alayn
  • Sauser, Florian
  • Llera, Miguel
  • Le Floch, Sébastien
We present an enhanced performance Brillouin optical time-domain analysis sensor that uses dual probes waves with optical frequency modulation and cyclic coding. The frequency modulation serves to increase the probe power that can be injected in the fiber before the onset of non-local effects and noise generated by spontaneous Brillouin scattering. This leads to higher detected signal-to-noise ratio (SNR), which is further increased by the coding gain. The enhanced SNR translates to extended range for the sensor, with experiments demonstrating 1-m spatial resolution over a 164 km fiber loop with a 3-MHz Brillouin frequency shift measurement precision at the worst contrast position. In addition, we introduce a study of the power limits that can be injected in the fiber with cyclic coding before the appearance of distortions in the decoded signal., The authors wish to acknowledge the financial support of the Spanish Ministerio de Economía y Competitividad through the projects TEC2013-47264- C2-2-R and TEC2016-76021-C2-1-R, FEDER funds and the UPNA.