Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

The role of the food banks in saving freshwater resources through reducing food waste: the case of the Food Bank of Navarra, Spain

  • González Peñalver, José Miguel
  • Martínez Aldaya, Maite
In the year 2011, the FAO estimated that food loss and waste reached one third of the total food produced worldwide. Since then, numerous studies have been published characterizing this problem and reflecting on its repercussions, not only social, but also environmental. Food wastage triggers unnecessary greenhouse gas emissions, deforestation or loss of biodiversity. This study aims to quantify the water-related benefits associated with food loss and waste reduction by studying the Food Bank of Navarra (FBN). For this purpose, the water footprint assessment manual has been followed. First, the water footprint of the activities of the FBN has been analysed for the year 2018 (scenario with the FBN). A comparative analysis has been carried out between the scenario with the FBN and a theoretical scenario without the action of the FBN. This has allowed us to highlight the benefits associated with the activity of this entity. The FBN not only avoided the waste of 2.7 thousand tons of food suitable for consumption in 2018, but also avoided the unnecessary use of more than 3.2 million m3 of freshwater. As a result of the present investigation, it can be stated that promoting food banks, which avoid food waste, would be an effective way to contribute to the protection and conservation of water resources., The project leading to these results has received funding from ‘la Caixa’ and Caja Navarra Foundation, under agreement LCF/PR/PR13/51080004. The project was awarded with a Research Initiation Grant of the Public University of Navarra, for its collaboration with the Institute for Innovation and Sustainable Development in Food Chain (ISFOOD).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Effect of high-energy ball-milling on the magnetostructural properties of a Ni45Co5Mn35Sn15 alloy

  • López García, José Luis
  • Sánchez-Alarcos Gómez, Vicente
  • Recarte Callado, Vicente
  • Rodríguez Velamazán, José Alberto
  • Unzueta, Iraultza
  • García, José Ángel
  • Plazaola, Fernando
  • La Roca, Paulo Matías
  • Pérez de Landazábal Berganzo, José Ignacio
The effect of high-energy ball-milling on the magnetostructural properties of a Ni45Co5Mn35Sn15 alloy in austenitic phase at room temperature has been analyzed by neutron and high-resolution X-ray diffraction. The ball milling promotes a mechanically-induced martensitic transformation as well as the appearance of amorphous-like non-transforming regions, following a double stage; for short milling times (below 30 min), a strong size reduction and martensite induction occur. On the opposite, for longer times, the increase of strains predominates and consequently a larger amount of non-transforming regions appears. The effect of the microstructural defects brought by milling (as dislocations) on both the enthalpy change at the martensitic transformation and the high field magnetization of the austenite has been quantitatively estimated and correlated to the internal strains. Contrary to what occurs in ternary Ni-Mn-Sn alloys, the mechanically-induced defects do not change the ferromagnetic coupling between Mn atoms, but just cause a net reduction on the magnetic moments., This work has been carried out with the financial support of the Spanish Ministerio de Economía y Competitividad (Projects number MAT2015-65165-C2-R) Agencia Estatal de Investigación (AEI), Ministerio de Ciencia, Innovación y Universidades (Projects number RTI2018-094683-B-C54 (MCIU/AEI/FEDER, UE)), Navarra Government (Project number PC017-018 AMELEC) and Basque Government Grant No. IT-1005-16. PLR has received funding from la Caixa and Caja Navarra Foundations, under agreement LCF/PR/PR13/51080004 .
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Medida de torsión en seguidores solares con sensores de fibra óptica, Torsion measurements on solar trackers using fiber optic sensors

  • Leandro González, Daniel
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
  • Loayssa Lara, Alayn
  • Júdez Colorado, Aitor
  • Mariñelarena Ollacarizqueta, Jon
  • Falcone Lanas, Francisco
  • Jiménez Romero, Sergio
  • Moriana García, Iñaki
En este trabajo se ha monitorizado la torsión sufrida por una estructura de seguidores solares empleando sensores de fibra óptica. Estas medidas de campo se han obtenido con una red de sensores formada por 45 redes de difracción de Bragg en una huerta solar activa. Estos resultados, correlados con la velocidad y dirección del viento permitirían aumentar la eficiencia de los seguidores y ayudar a entender y prevenir efectos negativos relacionados con inestabilidades aeroelásticas., In this work, the torsion experienced by set of solar trackers is monitored using fiber optic sensors. The in-field measurements were obtained using a sensor network comprising 45 fiber Bragg gratings in an active solar plant. These results, correlated with wind speed and direction could increase efficiency and lead to understand and prevent harmful effects related to aeroelastic instability events., Este trabajo ha sido financiado por el proyecto WINDSOLAR (0011-1365-2017-000122) del Gobierno de Navarra, los proyectos TEC2016-76021-C2 y PID2019-107270RB-C22, los fondos FEDER, la European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143 y las fundaciones 'Caja Navarra' y 'la Caixa' con el proyecto LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

The impact of the territorial gradient and the irrigation water price on agricultural production along the first phase of the Navarra Canal in Spain

  • Martínez Aldaya, Maite
  • Gutiérrez-Martín, Carlos
  • Espinosa-Tasón, Jaime
  • Ederra, Idoia
  • Sánchez García, Mercedes
Water is an issue in Spain, where it is generally scarce, and its availability is highly variable in different areas and times, particularly in agriculture, the main water consumer. Water pricing is one of the policy instruments used to control irrigation water use. However, specific contextual studies to provide greater details, understand farmers’ behaviour, and clarify the consequences and effectiveness of water pricing are generally unavailable. Here, we developed and applied a simulation model based on two Positive Mathematical Programming (PMP) methods, which makes the model more robust, to better understand and quantify the impact of the north–south territorial gradient on farmers’ decisions concerning agricultural water pricing in the first phase of the Navarra Canal irrigation area in northern Spain. This model couples water use with rainfed and irrigated areas, farmer revenue, and labour. The results show spatial north–south variability in the 50 km of the first phase of the Navarra Canal. In northern and middle regions, when water prices are increased, rainfed crops are chosen to substitute irrigated crops due to abundant rainfall and a lack of the appropriate climate and soil to grow other crops. Meanwhile, southern regions depend mainly on irrigation and are more sensitive to water price increases. These very productive southern regions also show larger gross margins and paid labour values. In every canal region, with an increase of 0.1 EUR/m3 in the water price, economic losses can reach up to 400 EUR/ha. Meanwhile, an increase in water prices over 0 EUR/m3 leads to decreased water use per hectare., The project leading to these results received funding from “la Caixa” and Caja Navarra Foundation, under agreement LCF/PR/PR13/51080004, from Programa Operativo FEDER Andalucía 2014–2020 (Ref 1263831-R) and the Spanish Ministry of Science and Innovation (TED2021-131066B-I00).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Monitoring structural transformations in metamagnetic shape memory alloys by non-contact GMI technology

  • Beato López, Juan Jesús
  • La Roca, Paulo Matías
  • Algueta-Miguel, Jose M.
  • Garayo Urabayen, Eneko
  • Sánchez-Alarcos Gómez, Vicente
  • Recarte Callado, Vicente
  • Gómez Polo, Cristina
  • Pérez de Landazábal Berganzo, José Ignacio
Different applications based on metamagnetic shape memory alloy (MSMA) require monitoring the evolution of the martensitic transformation (MT) to optimize the actuation mechanism. To avoid interaction with the active material, a non-contact technique would be ideal. Nevertheless, non-contact detection involves complex methods like diffraction, optical analysis, or electromagnetic technology. The present work demonstrates that the MT can be monitored without interaction with the active material using a low-cost technology based on the Giant Magnetoimpedance (GMI) effect. The GMI sensor is based on a (CoFe)SiB soft magnetic wire submitted to an alternating current and whose second harmonic voltage variation allows to detect changes in the strength of the stray magnetic fields linked to the metamagnetic phase transition. The sensor has been tested using the MT of a NiMnInCo MSMA. A specific application for environmental temperature control using the non-contact GMI sensor is proposed., P. La Roca has received funding from “la Caixa” and "Caja Navarra" Foundations, under agreement LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Martensitic transformation controlled by electromagnetic field: from experimental evidence to wireless actuator applications

  • Garayo Urabayen, Eneko
  • La Roca, Paulo Matías
  • Gómez Polo, Cristina
  • Sánchez-Alarcos Gómez, Vicente
  • Recarte Callado, Vicente
  • Pérez de Landazábal Berganzo, José Ignacio
Mechanical actuators based on shape memory alloys (SMA) are becoming a key component in the development of novel soft robotic applications and surgically implantable devices. Their working principle relies in the temperature induced martensitic transformation (MT), which is responsible of the actuation mechanism. In this work, we found experimental evidence to show that the martensitic transformation can be controlled by electromagnetic field (EF) by a wireless process in ferromagnetic shape memory alloys. It is shown that the martensitic transformation can be driven by an external EF (frequency 45 kHz) while the specific absorption rate (SAR), which was determined through real-time dynamic magnetization measurements, allows the instantaneous monitoring of the transformation evolution. On the basis of the obtained results, we propose a strategy to achieve a battery-free wireless SMA actuator that can be remotely controlled. This concept can be applicable to other SMA material that exhibit a similar magneto-structural phase transition, This work has been carried out with the financial support of the Spanish ‘‘Agencia Estatal de Investigación (AEI), Ministerio de Ciencia, Innovación y Universidades” (Projects number RTI2018-094683-B-C54 (MCIU/AEI/FEDER, EU)), Navarra Government (Project number PC017-018 AMELEC). P. La Roca has received funding from ‘‘la Caixa” and ‘‘Caja Navarra” Foundations, under agreement LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Multiparameter sensor based on a multiinterferometric serial configuration for temperature and strain measurements

  • Pérez Herrera, Rosa Ana
  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Novais, Susana
  • Pradas Martínez, Javier
  • López-Amo Sáinz, Manuel
In this work, a multi-parameter point sensor based on the combination of Fabry-Perot (FP) and the anti-resonant (AR) reflecting guidance in cascade configuration is proposed and experimentally demonstrated. This structure, based on FP interference and AR reflecting guidance, was fabricated with two different air micro-cavities. The attained experimental results showed different strain and temperature sensitivities for the antiresonance contribution. However, when analyzing the FP interference, only strain sensitivity was observed, demonstrating that this air micro-cavity was also insensitive to temperature variations., This work was supported by the Spanish AEI projects TEC2016-76021-C2 and PID2019-107270RB-C22, FEDER Funds, the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 838143, Projects for young researches UPNA 2019, “Caja Navarra” and “la Caixa” foundations under agreement LCF/PR/PR13/51080004 and the grant BGP18/00180 of the “Beatriz Galindo” programme from the Spanish Ministry of Science, Innovation and Universities.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Sistema de interrogación multi-sensor basado en multiplexación en longitud de onda y tiempo, Multi-sensor interrogation system based on wavelength and time multiplexing

  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Pérez González, Asier
  • López-Amo Sáinz, Manuel
En este trabajo se propone un sistema de interrogación versátil y económico basada en la generación de pulsos empleando la modulación directa de diodos láser DFB. Se ha demostrado una resolución en longitud de onda de 1 pm para una separación de sensores de 600m. La validación del interrogador se ha llevado a cabo monitorizando una red de sensores de 26 km de longitud que incluye redes de difracción de Bragg, reflectores y un interferómetro Fabry-Pérot., This work proposes a versatile and cost-effective interrogation system based on pulses generation using direct modulated DFB laser diodes. A wavelength resolution of 1 pm is demonstrated for a 600 m sensor-spacing. A 26 km-long sensor network including fiber Bragg gratings, wideband reflectors and a Fabry-Pérot interferometer is used to validate the interrogator., Este trabajo ha sido financiado por los proyectos TEC2016-76021-C2 y PID2019-107270RB-C22, los fondos FEDER, la European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143, el contrato Beatriz Galindo BEAGAL18/00116 y las fundaciones 'Caja Navarra' y 'la Caixa' con el proyecto LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Environment and density-dependency explain the fine-scale aggregation of tree recruits before and after thinning in a mixed forest of Southern Europe

  • Rodríguez Pérez, Javier
  • Peralta de Andrés, Francisco Javier
  • Imbert Rodríguez, Bosco
Thinning in forest management primarily reduces the density of trees and alters the patchiness and spatial complexity of environmental factors and individual interactions between plant recruits. At fine spatial scales, little is known about the relative weight of ecological processes affecting tree regeneration before and after thinning events. Here we studied the density and aggregation of tree recruits in fully-mapped plots located in mixed forests in Northern Iberian Peninsula (Southern Europe) for over four years, which comprises one year before and three years after a thinning event. We applied spatial point-pattern analyses to examine (a) the aggregation of recruits, and their association with trees and (b) the relative effect of both environmental (i.e., the patchiness of the local environment) and density-dependent factors (i.e., the aggregation of trees and/or recruits) to predict the density, aggregation, and survival of recruits. We found, in thinning plots, that recruits were less dense, their aggregation pattern was more heterogeneous, were distributed randomly in respect of trees and their survival was almost unaffected by the tree proximity. By contrast, recruits in control plots were denser, were only aggregated at distances lower than 1.0 m, were closer to trees, and such closer distance to trees affected negatively in their survival. Independently of the treatment, the aggregation of recruits was chiefly determined by the density-dependent factors at less than 1.0 m and environmental factors at distances beyond that proximity. Overall, our results suggest that thinning affected the aggregation of recruits at two spatial scales: (a) by favoring the tree-recruit and recruit-recruit facilitation at less than 1.0 m and (b) by modifying spatial heterogeneity of the environment at distances beyond that proximity., This research was funded by the Spanish Ministry of Economy and Competitiveness (AGL2006-08288 and AGL2009-11287). Javier Rodríguez-Pérez was funded from the ‘'la Caixa’ and 'Caja Navarra' Foundation, under agreement LCF/PR/PR13/51080004 in the framework of UPNA’s 'Captación de Talento' program.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Microdrilled tapers to enhance optical fiber lasers for sensing

  • Pérez Herrera, Rosa Ana
  • Bravo Acha, Mikel
  • Roldán Varona, Pablo
  • Leandro González, Daniel
  • Rodríguez Cobo, Luis
  • López Higuera, José Miguel
  • López-Amo Sáinz, Manuel
In this work, an experimental analysis of the performance of different types of quasi-randomly distributed reflectors inscribed into a single-mode fiber as a sensing mirror is presented. These artificially-controlled backscattering fiber reflectors are used in short linear cavity fiber lasers. In particular, laser emission and sensor application features are analyzed when employing optical tapered fibers, micro-drilled optical fibers and 50 μm-waist or 100 μm-waist micro-drilled tapered fibers (MDTF). Single-wavelength laser with an output power level of about 8.2 dBm and an optical signal-to-noise ratio of 45 dB were measured when employing a 50 μm-waist micro-drilled tapered optical fiber. The achieved temperature sensitivities were similar to those of FBGs; however, the strain sensitivity improved more than one order of magnitude in comparison with FBG sensors, attaining slope sensitivities as good as 18.1 pm/με when using a 50 μm-waist MDTF as distributed reflector., This work is part of the project PID2019-107270RB, funded by MCIN/ AEI/10.13039/501100011033 and FEDER 'A way to make Europe', the Ministerio de Educación, Cultura y Deporte of Spain (PhD grant FPU2018/02797), the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 838143, the Beatriz Galindo BEAGAL18/00116 fellowship, the 'Fundación Caja Navarra' and 'Fundación la Caixa' with the proyect LCF/PR/PR13/51080004 and Projects for young researchers UPNA 2019.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Room temperature huge magnetocaloric properties in low hysteresis ordered Cu-doped Ni-Mn-In-Co alloys

  • La Roca, Paulo Matías
  • López García, Javier
  • Sánchez-Alarcos Gómez, Vicente
  • Recarte Callado, Vicente
  • Rodríguez Velamazán, José Alberto
  • Pérez de Landazábal Berganzo, José Ignacio
The reduction of the thermal hysteresis in first order magnetostructural transition is a determining factor to decrease energy losses and to improve the efficiency of magnetocaloric cooling based systems. In this work, a Cu doped NiMnInCo metamagnetic shape memory alloy (MMSMA) exhibiting a narrow thermal hysteresis (around 5 K) at room temperature has been designed. In this alloy, the induced L21 ordering process affects the phase stability in an unusual way compared to that observed in NiMnInCo and other NiMn based alloys. This ordering produces an increase in the Curie temperature of the austenite but hardly affects the mar tensitic transformation temperatures. As a consequence, the ordering increases the magnetization of the austenite without changing the transformation temperatures, doubles the sensitivity of the transformation to magnetic fields (the Claussius-Clapeyron slope goes from 2.1 to 3.9 K/T), improves the magnetocaloric effect, the reversibility and finally, enhances the refrigeration capacity. In addition, the magnetic hysteresis losses are among the lowest reported in the literature and the effective cooling capacity coefficient RCeff reaches 86 J/Kg for 2 T (15 % higher than those found in Ni-Mn based alloys) and 314 J/Kg for 6 T fields. Therefore, the ordered alloy possesses an excellent combination of low thermal hysteresis and high RCeff, not achieved previously in metamagnetic shape memory alloys near room temperature., This work has been carried out with the financial support of the Spanish “Agencia Estatal de Investigación (AEI), Ministerio de Ciencia, Innovación y Universidades” (Projects number RTI2018–094683-B-C54 (MCIU/AEI/FEDER, UE)), Navarra Government (Project number PC017–018 AMELEC). P. La Roca has received funding from “la Caixa” and "Caja Navarra" Foundations, under agreement LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A comparative analysis of the water and carbon footprints of hybrid, plant-based, and animal-based burgers

  • Domínguez-Lacueva, Paula
  • Beriain Apesteguía, María José
  • Martínez Aldaya, Maite
Food production represents a complex sustainability challenge, including climate change and freshwater scarcity. In order to promote the incorporation of sustainable prepared protein dishes into the agrifood market, this study aims to assess the environmental performance of three different burgers: a beef burger, a plant-based burger (soy, beans, and rice), and a hybrid burger (50-50 composition) by comparing the water use and the CO<inf>2</inf> emissions relative to their nutritional value. The environmental indicators used to perform the current study were the water footprint, the carbon footprint (CF), and their respective nutritional productivity indexes (considering fats, proteins, and carbohydrates). The water needed to produce the beef burger was 1.8 times greater than the quantity needed to produce the hybrid burger, and 21 times greater in the case of the plant-based one. In turn, regarding the CF, the beef burger emitted approximately 2 times more kgCO<inf>2</inf>e along the supply chain when compared with the hybrid burger, and 13 times more than the plant-based one. However, because the meat burger comes from cattle raised on grasslands, the greenhouse gas emissions are likely lower than those from other, less sustainable forms of beef production. The plant-based burger was, therefore, more sustainable in terms of water use and carbon emissions relative to the nutrition productivity index than the meat and hybrid options., The project leading to these results received funding from ‘la Caixa’ and the Caja Navarra Foundation under Agreement LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Alternative thermal cycling treatment to produce abnormal grain growth in feMnAlNi alloys: study of composition variations and effects on the relative phase stabilities

  • La Roca, Paulo Matías
  • Guerrero, L.M.
  • Baruj, A.
  • Vallejos, J. M.
  • Sade, M.
An alternative method to obtain abnormal grain growth in Fe–Mn–Al–Ni system is presented. A crucible is used to control the cooling speed of the samples from 1200 °C enabling the nucleation of the equilibrium fcc phase. This fcc structure leads to an abnormal grain growth after heating to 1200 °C, temperature at which the bcc phase is stable. In this way, crystals with a mean diameter of 18 mm are obtained after 4 thermal cycles which take approximately 2 h. Additionally, precise composition measurements using neutron activation allowed the detection of a decrease in Mn content after each thermal cycle. Using electrical resistivity measurements, the effect of the variation of Mn content on the relative phase stability between the bcc austenite and the fcc martensite has been observed and is discussed here., Financial support from ANPCyT (PICT-2017-4518), ANPCyT (PICT-2017-2198), CONICET (PIP 2015-112-201501-00521), CONICET (PIP 2017-2019 GI 0634), and Universidad Nacional de Cuyo (06/C516 and 06/C588) is acknowledged. PLR has received funding from 'la Caixa' and 'Caja Navarra' Foundations, under agreement LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Exploring genomic diversity and reproductive strategies in three expansion phases of the superdominant Brachypodium rupestre in high mountain grasslands

  • Durán Lázaro, María
  • Campos, Miguel
  • Ben-Menni, Samira
  • Sotomayor Alge, Alba
  • Catalán, Pilar
  • San Emeterio Garciandía, Leticia
  • Canals Tresserras, Rosa María
Tall-grass expansion in natural plant communities is a concern under current global change scenarios. Driven by factors such as community vulnerability and the competitive abilities of tall-grass species, this phenomenon is exemplified by Brachypodium rupestre (Host) Roem. and Schult, a perennial tall-grass native to Europe. B. rupestre spreads aggressively in the grasslands of the western Pyrenees due to a disrupted regime of lack of herbivory and recurrent burnings that has persisted over several decades. This study aims to investigate whether the contrasted managements of grazing, abandonment and burnings have promoted specific reproductive traits and impacted the population genomics of B. rupestre. Nine sites varying in cover of B. rupestre classified into three expansion phases associated to different management regimes were monitored: (i) scattered populations in multispecific grazed sites, (ii) stand populations expanding at sites of relaxed grazing or abandonment, and (iii) superdominant populations constituting dense degraded covers in recurrently burned sites. ddRADseq data showed high genomic diversity but relatively low genomic structure, likely due to substantial gene flow and the absence of wind barriers. The standardized index of association supported asexual reproduction in all populations, which is coupled with sexual reproduction. Contrasting management practices did not promote distinct genomic identities between expansion phases; rather, the genetic differentiation and divergence of populations responded to life history and spatial isolation, even within a small geographic area. The similar levels of genetic diversity and the significantly different number of clones between expansion phases suggest a complex pattern of genotypic and clonal variability, which may be influenced by environmental factors (historical disturbance regimes)., Open Access funding provided by Universidad Pública de Navarra. This study was financially supported by the Spanish Ministry of Science and Innovation through different projects (PID2020-116786RB-C31, PID2022-140074NB-I00, TED2021-131073B-I00 and PDC2022-133712-I00), and by the Spanish Aragon Government (Bioflora A01-23R). MD was supported by an UPNA's doctorate scholarship, LS by La Caixa and CAN Foundations (LCF/PR/PR13/51080004), MC by a predoctoral FPI fellowship of the Spanish Ministry of Science, AS by a predoctoral FPI fellowship of the Aragon Government and SB-M by a Spanish Ministry of Universities Margarita Salas postdoctoral contract.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Water footprint and virtual water trade of maize in the province of Buenos Aires, Argentina

  • Arrien, María Macarena
  • Martínez Aldaya, Maite
  • Rodríguez, Corina Iris
Agriculture is the largest fresh water consuming sector, and maize is the most produced and consumed crop worldwide. The water footprint (WF) methodology quantifies and evaluates the water volumes consumed and polluted by a given crop, as well as its impacts. In this work, we quantified for the first time the green WF (soil water from precipitation that is evapotranspired) and the green virtual water exports of maize from Buenos Aires province, Argentina, during 2016–2017, due to the relevance of this region in the world maize trade. Furthermore, at local level, we quantified the green, blue (evapotranspired irrigation), and grey (volume of water needed to assimilate a pollution load) WF of maize in a pilot basin. The green WF of maize in the province of Buenos Aires ranged between 170 and 730 m3 /ton, with the highest values in the south following a pattern of yields. The contribution of this province in terms of green virtual water to the international maize trade reached 2213 hm3 /year, allowing some water-scarce nations to ensure water and water-dependent food security and avoid further environmental impacts related to water. At the Napaleofú basin scale, the total WF of rainfed maize was 358 m3 /ton (89% green and 11% grey) and 388 m3 /ton (58% green, 25% blue, and 17% grey) for the irrigated crop, showing that there is not only a green WF behind the exported maize, but also a Nitrogen-related grey WF., This research has been carried out with the support of the National Agency for Scientific and Technological Promotion of Argentina (PICT 2017-0564). The participation of M.M. Arrien was possible through a grant from the Scientific Research Commission of the Province of Buenos Aires (CICPBA), Argentina. The project leading to these results has also received funding from 'la Caixa' and Caja Navarra Foundation, under agreement LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A food web approach reveals the vulnerability of biocontrol services by birds and bats to landscape modification at regional scale

  • Herrera, José M.
  • Silva, Bruno
  • Jiménez Navarro, Gerardo
  • Barreiro, Silvia
  • Melguizo Ruiz, Nereida
  • Moreira, Francisco
  • Vasconcelos, Sasha
  • Morgado, Rui
  • Rodríguez Pérez, Javier
Pest control services provided by naturally occurring species (the so-called biocontrol services) are widely recognized to provide key incentives for biodiversity conservation. This is particularly relevant for vertebrate-mediated biocontrol services as many vertebrate species are of conservation concern, with most of their decline associated to landscape modification for agricultural purposes. Yet, we still lack rigorous approaches evaluating landscape-level correlates of biocontrol potential by vertebrates over broad spatial extents to better inform land-use and management decisions. We performed a spatially-explicit interaction-based assessment of potential biocontrol services in Portugal, using 1853 pairwise trophic interactions between 78 flying vertebrate species (birds and bats) and 53 insect pests associated to two widespread and economically valuable crops in the Euro-Mediterranean region, olive groves (Olea europaea subsp. europaea) and vineyards (Vitis vinifera subsp. vinifera). The study area was framed using 1004 square cells, each 10 × 10 km in size. Potential biocontrol services were determined at all those 10 × 10 km grid-cells in which each crop was present as the proportion of the realized out of all potential pairwise interactions between vertebrates and pests. Landscape correlates of biocontrol potential were also explored. Our work suggests that both birds and bats can effectively provide biocontrol services in olive groves and vineyards as they prey many insect pest species associated to both crops. Moreover, it demonstrates that these potential services are impacted by landscape-scale features and that this impact is consistent when evaluated over broad spatial extents. Thus, biocontrol potential by vertebrates significantly increases with increasing amount of natural area, while decreases with increasing area devoted to target crops, particularly olive groves. Overall, our study highlights the suitability of our interaction-based approach to perform spatially-explicit assessments of potential biocontrol services by vertebrates at local spatial scales and suggest its utility for integrating biodiversity and ecosystem services in conservation planning over broad spatial extents., This work was supported by the projects ECOLIVES (PTDC/AAG-REC/6480/2014) and OLEAdapt (PTDC/ BIA-CBI/1365/2020) both funded by the Portuguese National Public Agency for Science, Technology and Innovation, and the project SHOWCASE (ref. 862480) funded by the Horizon 2020 Research and Innovation programme from the European Union. and the project NORTE 01-0246-FEDER-000063, funded by Norte Portugal Regional Operational Programme (NORTE2020),under the PORTUGAL 2020 Partnership Agreement, through the European Regional Development Fund (ERDF) JMH and FM were supported, respectively, by the contracts IF/00001/2015 and IF/01053/2015 funded by the FCT. JRP was supported by ‘la Caixa’ and ‘Caja Navarra’ Foundations, under agreement LCF/PR/PR13/51080004 in the framework of UPNA’s ‘Captación de Talento’ program. BS, GJ-N, SV and RM were supported, respectively, by the PhD studentships SFRH/BD/137803/2018, SFRH/BD/133017/2017, SFRH/BD/121388/2016 and SFRH/BD/99746/2014 funded by the FCT.