Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 47
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Metal-organic and covalent organic frameworks as single-site catalysts

  • Rogge, S. M. J.
  • Bavykina, Anastasiya
  • Hajek, J.
  • Olivos-Suarez, A. I.
  • Sepulveda-Escribano, A.
  • Vimont, A.
  • Clet, G.
  • Bazin, P.
  • Kapteijn, Freek
  • Daturi, M.
  • Ramos-Fernandez, Enrique V.
  • Van Speybroeck, Veronique
  • Gascon, Jorge
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Heterogeneous single-site catalysts consist of isolated, well-defined, active sites that are spatially separated in a given solid and, ideally, structurally identical. In this review, the potential of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) as platforms for the development of heterogeneous single-site catalysts is reviewed thoroughly. In the first part of this article, synthetic strategies and progress in the implementation of such sites in these two classes of materials are discussed. Because these solids are excellent playgrounds to allow a better understanding of catalytic functions, we highlight the most important recent advances in the modelling and spectroscopic characterization of single-site catalysts based on these materials. Finally, we discuss the potential of MOFs as materials in which several single-site catalytic functions can be combined within one framework along with their potential as powerful enzyme-mimicking materials. The review is wrapped up with our personal vision on future research directions., S. M. J. Rogge, J. Hajek, and V. Van Speybroeck acknowledge the Fund for Scientific Research - Flanders (FWO), the Research Board of Ghent University (BOF) and BELSPO in the frame of IAP/7/05 for financial support. V. Van Speybroeck acknowledges funding from the European Union's Horizon 2020 research and innovation programme (consolidator ERC grant agreement no. 647755 - DYNPOR (2015-2020)). This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 641887 (project acronym: DEFNET). W. Dewitte and C. Caratelli are acknowledged for technical support with the figures. J. Gascon acknowledges funding from the European Union's 2020 research and innovation programme (ERC grant agreement no. 335746 - CrystEng-MOF-MMM) and from the Dutch Organization for Scientific Research (NWO, VIDI grant agreement 723.012.107 - MetMOFCat).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The effect of the surface patterning by ion beam irradiation on the Ag directional outflow in Ag/AlN nano-multilayers

  • Druzhinin, A.V.
  • Cancellieri, C.
  • Hauert, R.
  • Khrapova, N.N.
  • Mazilkin, A.A.
  • Straumal, B.B.
  • Janczak-Rusch, J.
  • Klyatskina, Elizaveta
[EN] Surface templating of nano-multilayers is a promising step for the advanced industrial application of these nanomaterials. In the present work, the effect of focused ion beam modification of Ag/AlN nano-multilayer near-surface region on the Ag surface outflow is revealed. Surface patterning by ion beam irradiation leads to the formation of a higher amount of Ag crystals in relation to the intact surface region. Heat treatment initiates grooving of Ag grain boundaries, resulting in the formation of channels in the nano-multilayer volume. These channels act as pathways for mass transport of Ag to the film surface. Ion bombardment creates regions of high concentration of non-equilibrium defects, which locally increase the driving force for grooving and channeling, thereby promoting creation of more pathways for Ag surface migration. The obtained experimental results indicate that surface modification by focused ion beam can be used for production of nano-multilayers with designed templates of surface outflow., Dr. Aleksandr V. Druzhinin acknowledges Russian Science Foundation (RSF) under project N. 22-72-00006 (https://rscf.ru/en/p roject/22-72-00006/) for financial support of this research (investigation of initial microstructure, in situ secondary electron imaging in AES machine, TEM cross-section analysis). Prof. Jolanta Janczak-Rusch and Dr. Claudia Cancellieri acknowledge the EU FP7 program (FP7-PEOPLE2013-IRSES-612552-EXMONAN project) for financial support (NML deposition, irradiation of NML surface by HeFIB) and Swiss National Science Foundation for support in equipment procurement (R Equip 206021_133823; Zeiss OrionPlus HeFIB). The authors acknowledge Dr. Mirco Chiodi for the deposition of the nano-multilayers, Dr. Ivan Shorubalko for assisting with HeFIB irradiation experiments and Dr. Lars P. H. Jeurgens for fruitful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Precise dose verification in proton therapy via F-18 activation measured with positron emission tomography imaging

  • Balcerzyk, Marcin
  • de la Rosa, Ruben Fernandez
  • Pozo, Miguel Angel
  • Smith, Rhodri Lyn
  • Sanchez-Merino, Gaspar
  • Freire-López-Fando, Marta
  • González Martínez, Antonio Javier
[EN] Objective. To verify the delivered dose in proton therapy in vivo using positron emission tomography (PET) with millimetric precision. Approach. Proton and ion therapy have gained significant importance in cancer radiotherapy due to their favorable dose distribution and tissue-sparing properties. In conventional gamma radiation therapy some methods of in vivo dose verification are possible with current medical devices. In proton and ion therapy, dose verification is limited, with PET being mainly used for particle range assessments rather than full dose mapping. Prompt gamma techniques are well suited for range verification but are not suitable for full three-dimensional (3D), voxel-wise dose mapping. This study presents initial results for in vivo dose verification using F-18 PET imaging during proton therapy. Although the activity concentration of F-18 generated by typical clinical doses (several Gy) is low, PET imaging performed approximately one-hour post-irradiation yields sufficient image quality to derive dose-volume histograms (DVHs), enabling spatial dose verification. We simulated proton treatment in a brain phantom using the Gate and RayStation platforms to assess the production of several positron emitting isotopes. We focused on the production of fluorine-18 (F-18), given its low positron energy and low energy threshold for production, which enables accurate replication of the dose distribution. To evaluate the detectability of the anticipated low activity concentrations (on the order of a fraction of a Bq ml-1) following a 3 Gy proton irradiation, we tested three PET systems: two preclinical scanners based on LYSO detectors and one clinical scanner based on BGO crystals. Finally, we analyzed the DVHs for the simulated and measured dose and activity distributions and compared them with the planned distribution. Main Results. F-18 PET imaging in proton therapy correlates with the delivered dose to within 5% and matches the planned dose fall-off edge within 1 mm, enabling accurate and precise in vivo dose verification. Significance. F-18 enables more accurate proton-therapy dose verification than other positron emitters studied (C-11, N-13, and O-15), showing the closest spatial correspondence to the planned dose and activity levels post-therapy that remain detectable on modern BGO-based PET systems., The publication was funded in part by Fundación Vital Fundazioa. This work was supported by the Agencia Valenciana de Innovacion under Grant No. INNVA1/2024/72. M. Freire was supported by the Program APOSTD for Researchers in Postdoctoral Phase of the Generalitat Valenciana (CIAPOS/d2023/141).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Shaping zones of quiet in a large enclosure generated by an active noise control system

  • Wrona, Stanislaw
  • Pawelczyk, Marek
  • de Diego Antón, María|||0000-0001-9948-3396
[EN] Performance of an Active Noise Control (ANC) system strongly depends on sensors and actuators spatial arrangement. It determines both achieved Noise Reduction (NR) levels and spatial distribution of obtained zones of quiet, making it an essential problem. However, if the acoustic field in the enclosure can be appropriately modelled, then optimization algorithms can be employed to find efficient configuration of the ANC system, enhancing its performance according to a formulated cost function and constraints. This paper proposes a complete method for enhancing NR levels and shaping zones of quiet generated with an ANC system by optimization of sensors and actuators arrangement. A Memetic Algorithm (MA) is utilized. The MA itself and its proposed operators are described. The optimization problem formulation is derived and discussed. As a control algorithm, Distributed Multiple Error Filtered-x Least Mean Square (DMEFxLMS) is used. Extensive simulation results are presented for an exemplary real enclosure. The model of the acoustic environment has been obtained by real-world experiments, resulting in identification of 36864 acoustic responses in total. Practically feasible cost function and constraints are evaluated. Advantages and limits of the method are pointed out and discussed., The research reported in this paper has been supported by the National Science Centre, Poland, decision no. DEC-2017/25/B/ST7/02236, and by EU together with Spanish Government under Grant TEC2015-67387-C4-1-R b(MINECO/FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automatic Algorithm Design for Hybrid Flowshop Scheduling Problems

  • Alfaro-Fernandez, Pedro
  • Ruiz García, Rubén
  • Pagnozzi, Federico
  • Stützle, Thomas
[EN] Industrial production scheduling problems are challenges that researchers have been trying to solve for decades. Many practical scheduling problems such as the hybrid flowshop are ATP-hard. As a result, researchers resort to metaheuristics to obtain effective and efficient solutions. The traditional design process of metaheuristics is mainly manual, often metaphor-based, biased by previous experience and prone to producing overly tailored methods that only work well on the tested problems and objectives. In this paper, we use an Automatic Algorithm Design (AAD) methodology to eliminate these limitations. AAD is capable of composing algorithms from components with minimal human intervention. We test the proposed MD for three different optimization objectives in the hybrid flowshop. Comprehensive computational and statistical testing demonstrates that automatically designed algorithms outperform specifically tailored state-of-the-art methods for the tested objectives in most cases., Pedro Alfaro-Fernandez and Ruben Ruiz are partially supported by the Spanish Ministry of Science, Innovation, and Universities, under the project "OPTEP-Port Terminal Operations Optimization" (No. RTI2018-094940-B-I00) financed with FEDER funds and under grants BES-2013-064858 and EEBB-I-15-10089. This work was supported by the COMEX project (P7/36) within the Interuniversity Attraction Poles Programme of the Belgian Science Policy Office. Thomas Stiitzle acknowledges support from the Belgian F.R.S.-FNRS, of which he is a Research Director.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Antiferromagnetic Ising model in a triangular vortex lattice of quantum fluids of light

  • Alyatkin, Sergey
  • Kartashov, Yaroslav V.
  • Sitnik, Kirill A.
  • Gnusov, Ivan
  • Töpfer, Julian D.
  • Sigurosson, Helgi
  • Lagoudakis, Pavlos G.
  • Milián Enrique, Carles|||0000-0001-8492-366X
[EN] Vortices are topologically distinctive objects appearing as phase twists in coherent fields of optical beams and Bose-Einstein condensates. Structured networks and artificial lattices of coupled vortices could offer a powerful platform to study and simulate interaction mechanisms between constituents of condensed matter systems, such as antiferromagnetic interactions, by replacement of spin angular momentum with orbital angular momentum. Here, we realize such a platform using a macroscopic quantum fluid of light based on exciton-polariton condensates. We imprint all-optical hexagonal lattice that results into a triangular vortex lattice, with each cell having a vortex of charge l = +/- 1. We reveal that pairs of coupled condensates spontaneously arrange their orbital angular momentum antiparallel, implying a form of artificial orbital "antiferromagnetism." We discover that correlation exists between the emergent vortex patterns in triangular condensate lattices and the low-energy solutions of the corresponding antiferromagnetic Ising system. Our study offers a path toward spontaneously ordered vortex arrays with nearly arbitrary configurations and controlled couplings., This work was supported by Russian Science Foundation (RSF) grant no. 21- 72- 00088. H.S. acknowledges Icelandic Research Fund (Rannis) grant no. 239552- 051. C.M. acknowledges support from the Spanish government via grant PID2021- 124618NB- C21 by MCIN/AEI/10.13039/501100011033 and "ERDF: a way of making Europe" of the European Union and the Generalitat Valenciana PROMETEO/2021/082. Y.V.K. acknowledges funding by the research project FFUU- 2024- 0003 of the Institute of Spectroscopy of the Russian Academy of Sciences.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Estimación de un Control Lateral Difuso de Vehículos, Vehicle Lateral Fuzzy Control Estimation

  • Onieva, Enrique
  • Milanés, Vicente
  • Pérez, Joshué
  • de Pedro, Teresa
[ES] La conducción autónoma es uno de los temas más interesantes dentro del área de los Sistemas Inteligentes de Transporte (ITS) y dentro de ella, el control automático del volante es uno de los retos más importantes al que se enfrentan investigadores de esta área. En este trabajo se presenta un ajuste basado en algoritmos genéticos de controladores difusos capaces de manejar automáticamente el volante de un vehículo convencional, reproduciendo actitudes de un conductor humano en diferentes situaciones. Para ello se ha monitorizado el estado del coche mientras es conducido por un humano y por medio de algoritmos genéticos se ha obtenido un controlador difuso apropiado para el manejo del volante del vehículo. Todo ello teniendo en cuenta dos requisitos básicos: el controlador debe ser capaz de manejar el vehículo a través de una ruta prefijada y ejecutar acciones de control suaves, para lograr así, una conducción confortable para los ocupantes del vehículo., [EN] Autonomous driving is one of the most interesting topics inside the area of the Intelligent Transportation Systems (ITS); the automatic control of the steering wheel is one of the most important challenges which researches face in this area. This work presents an adjustment based on genetic algorithms of fuzzy controllers capable of handling automatically the steering wheel of a conventional vehicle, reproducing attitudes of a human driver in different situations. To do that, the state of the car has been monitored while it is led by a human being and by means of genetic algorithms there has been obtained a fuzzy controller suitable for the managing of the steering wheel of the vehicle. All bearing two basic requirements in mind: the controller must be capable of handling the vehicle across a predefined route and of executing soft control actions to provide a comfortable conduction for the vehicle’s occupants., Este trabajo ha sido realizado gracias a los proyectos: TRANSITO (Coordinación Local entre Vehículos e Infraestructuras), TRA 2008-06602-C03-01; ENVITE (Comunicación entre Vehículos e Infraestructuras de Transporte por Carretera incluyendo GNSS en Zonas Criticas), MFOM T7/2006; y MARTA (Movilidad y Automoción con Redes de Transporte Avanzadas), (CDTI, CENIT 2007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modelling pre-modern flow distances of inland waterways – a GIS study in southern Germany, Modelado de distancias de flujos fluviales premodernos - un estudio SIG en la Alemania meridional

  • Werther, Lukas
  • Menn, Tanja
  • Schmidt, Johannes
  • Müller, Hartmut
[EN] Rivers form major traffic arteries in pre-modern Central Europe and accurate regional to supra-regional network models of inland navigation are crucial for economic history. However, navigation distances have hitherto been based on modern flow distances, which could be a significant source of error due to modern changes in flow distance and channel pattern. Here, we use a systematic comparison of vectorized old maps, which enlighten the fluvial landscape before most of the large-scale river engineering took place, and modern opensource geodata to deduce change ratios of flow distance and channel patterns. The river courses have been vectorised, edited and divided into comparable grid units. Based on the thalweg, meandering and braided/anabranching river sections have been identified and various ratios have been calculated in order to detect changes in length and channel patterns. Our large-scale analytical approach and Geographic Information System (GIS) workflow are transferable to other rivers in order to deduce change ratios on a European scale. The 19th century flow distance is suitable to model pre-modern navigation distances. As a case study, we have used our approach to reconstruct changes of flow pattern, flow distance and subsequent changes in navigation distance and transportation time for the rivers Altmühl, Danube, Main, Regnitz, Rednitz, Franconian and Swabian Rezat (Southern Germany). The change ratio is rather heterogeneous with length and travel time changes of the main channel up to 24% and an extensive transformation of channel morphology in many river sections. Based on published travel time data, we have modelled the effect of our change ratios. Shipping between the commercial hubs Ulm and Regensburg, to give an example, was up to 5 days longer based on pre-modern distances. This is highly significant and underlines the necessity for river-specific correction values to model supra-regional networks of pre-modern inland waterways and navigation with higher precision., [ES] Los ríos forman las principales arterias de tráfico en la Europa central premoderna y los modelos precisos de redes regionales a suprarregionales de navegación fluvial son cruciales en la historia económica. Sin embargo, las distancias de navegación se han basado hasta ahora en distancias de flujo modernas, lo que podría ser una fuente significativa de error debido a los cambios modernos en la distancia de flujo y en el patrón del canal. Aquí, utilizamos una comparación sistemática de mapas antiguos vectorizados, que iluminan el paisaje fluvial antes de que se llevara a cabo la mayor parte de la ingeniería fluvial a gran escala, y geodatos modernos de código abierto que permiten deducir las relaciones de cambio de la distancia del flujo y los patrones de los canales. Los cursos de los ríos se han vectorizado, editado y dividido en unidades de cuadrícula comparables. A partir de la línea de vaguada, se han identificado secciones de río serpenteantes y trenzadas/ramificadas y se han calculado varias proporciones con tal de detectar cambios en la longitud y en los patrones de los canales. Nuestro enfoque analítico a gran escala y el flujo de trabajo con el Sistema de Información Geográfica (SIG) son transferibles a otros ríos para deducir proporciones de cambio a escala europea. La distancia de flujo del siglo XIX es adecuada para modelar distancias de navegación premodernas. Como caso de estudio, hemos utilizado nuestro enfoque para reconstruir los cambios en el patrón de flujo, la distancia del flujo y los cambios posteriores en la distancia de navegación y el tiempo de transporte en los ríos Altmühl, Danubio, Main, Regnitz, Rednitz, Franconian y Swabian Rezat (sur de Alemania). La proporción de cambio es bastante heterogénea con cambios de longitud y tiempo de viaje del canal principal de hasta un 24% y una transformación extensa de la morfología del canal en muchas secciones de los ríos. Basándonos en los datos publicados de tiempos de viaje, hemos modelado el efecto de nuestros proporciones de cambio. La navegación entre los centros comerciales de Ulm y Regensburg, por ejemplo, fue hasta 5 días más duradera a partir de las distancias premodernas. Esto es muy significativo y subraya la necesidad de determinar valores de corrección específicos de los ríos que permitan modelar con mayor precisión las redes suprarregionales de vías navegables fluviales premodernas y la navegación., This work was supported by the German Research Foundation (DFG) in the scope of the DFG priority program 1630 (ET 20/7-2). Furthermore, we would like to thank the Bavarian State Library for access to specific Web Map Services.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

AF driver detection in pulmonary vein area by electropcardiographic imaging: Relation with a favorable outcome of pulmonary vein isolation

  • Fambuena-Santos, Carlos
  • Andreu M. Climent|||0000-0002-7260-8811
  • Guillem Sánchez, María Salud|||0000-0001-5660-3693
  • Hernández-Romero, Ismael
  • Molero-Alabau, Rubén
  • Atienza, Felipe
[EN] Pulmonary vein isolation (PVI) is the most successful treatment for atrial fibrillation (AF) nowadays. However, not all AF patients benefit from PVI. In this study, we evaluate the use of ECGI to identify reentries and relate rotor density in the pulmonary vein (PV) area as an indicator of PVI outcome. Rotor maps were computed in a set of 29 AF patients using a new rotor detection algorithm. The relationship between the distribution of reentrant activity and the clinical outcome after PVI was studied. The number of rotors and proportion of PSs in different atrial regions were computed and compared retrospectively in two groups of patients: patients that remained in sinus rhythm 6 months after PVI and patients with arrhythmia recurrence. The total number of rotors obtained was higher in patients returning to arrhythmia after the ablation (4.31 ± 2.77 vs. 3.58 ± 2.67%, p = 0.018). However, a significantly higher concentration of PSs in the pulmonary veins was found in patients that remained in sinus rhythm (10.20 ± 12.40% vs. 5.19 ± 9.13%, p = 0.011) 6 months after PVI. The results obtained show a direct relationship between the expected AF mechanism and the electrophysiological parameters provided by ECGI, suggesting that this technology offers relevant information to predict the clinical outcome after PVI in AF patients., This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 860974, PersonalizeAF, Ministerio de Ciencia e Innovacion (supported by FEDER Fondo Europeo de Desarrollo Regional PI17/01106, PEJ2018-003617, and RYC2018-024346-I), EIT Health (SAVE-COR Activity code 220385, EIT Health is supported by EIT, a body of the European Union), Generalitat Valenciana Conselleria d'Educacio, Investigacio, Cultura i Esport (ACIF/2020/265) and Spanish Agencia Estatal de Investigacion (AEI), part of the Ministerio de Ciencia e Innovacion, reference PID2020-119364RB-I00. *This publication reflects only the author's view and that the Agency is not responsible for any use that may be made of the information it contains.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Control de Velocidad basado en Lógica Borrosa para Entornos Urbanos Congestionados, Speed Control based on Fuzzy Logic for Traffic Jams

  • Milanés, V.
  • Onieva, E.
  • Pérez, J.
  • de Pedro, T.
  • González, C.
[ES] Los sistemas de control de crucero adaptativo permiten, adecuando la velocidad, realizar el seguimiento del vehículo precedente en autopistas mientras este vehículo no se detenga. Sin embargo, en áreas urbanas donde la congestión del tráfico obliga a continuas detenciones, este sistema pierde funcionalidad ya que, una vez detenido el vehículo, el conductor debe reactivar el sistema. En este artículo, se presenta un sistema de control de velocidad mediante lógica borrosa para situaciones continuadas de parada y arranque, en las que la velocidad del vehículo es inferior a diez kilómetros por hora. El sistema se ha implantado y probado en un vehículo comercial con excelentes resultados., [EN] The adaptive cruise control systems are capable of adapting the speed to the precedent car in highways as long as the car do not stop. However, in urban areas where the traffic flow can cause stop and go manoeuvres continuously, this system is not very useful due to the necessity of re-start it once the car is stopped. In this paper, an speed control based on fuzzy logic for continuous stop and go manoeuvres is presented where the speed car is up to ten kilometres per hour. The system has been tested with two Citroën C3 vehicles, one of them full automated, in the Instituto de Automática Industrial facilities with great results., Este trabajo ha sido realizado gracias a los proyectos: TRANSITO (Coordinación Local entre Vehículos e Infraestructuras), TRA 2008-06602-C03-01; ENVITE (Comunicación entre Vehículos e Infraestructuras de Transporte por Carretera incluyendo GNSS en Zonas Críticas), MFOM T7/2006; y MARTA (Movilidad y Automoción con Redes de Transportes Avanzadas), (CDTI, CENIT 2007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Coupling time-lapse ground penetrating radar surveys and infiltration experiments to characterize two types of non-uniform flow

  • Di Prima, Simone
  • Giannini, Vittoria
  • Roder, Ludmila Ribeiro
  • Giadrossich, Filippo
  • Lassabatere, Laurent
  • Stewart, Ryan D.
  • Najm, Majdi R.Abou
  • Longo, Vittorio
  • Campus, Sergio
  • Winiarski, Thierry
  • Angulo-Jaramillo, Rafael
  • Capello, Giorgio
  • Biddoccu, Marcella
  • Roggero, Pier Paolo
  • Campo García, Antonio Dámaso Del|||0000-0002-5279-4215
[EN] Understanding linkages between heterogeneous soil structures and non-uniform flow is fundamental for interpreting infiltration processes and improving hydrological simulations. Here, we utilized ground-penetrating radar (GPR) as a non-invasive technique to investigate those linkages and to complement current traditional methods that are labor-intensive, invasive, and non-repeatable. We combined time-lapse GPR surveys with different types of infiltration experiments to create three-dimensional (3D) diagrams of the wetting dynam-ics. We carried out the GPR surveys and validated them with in situ observations, independent measurements and field excavations at two experimental sites. Those sites were selected to represent different mechanisms that generate non-uniform flow: (1) preferential water infiltration initiated by tree trunk and root systems; and (2) lateral subsurface flow due to soil layering. Results revealed links between different types of soil hetero-geneity and non-uniform flow. The first experimental site provided evidence of root-induced preferential flow paths along coarse roots, emphasizing the important role of coarse roots in facilitating preferential water movement through the subsurface. The second experimental site showed that water infiltrated through the restrictive layer mainly following the plant root system. The presented approach offers a non-invasive, repeatable and accurate way to detect non-uniform flow., This work was supported through i) the European Regional Development Fund, European-Union and the Italian Ministry of Education, University and Research, Italy through the "Programma Operativo Nazionale (PON) Ricerca e Innovazione 2014-2020" (Linea 1 - Mobilita dei ricercatori, AIM1853149, CUP: J54I18000120001), ii) GASPAM Gestione Agronomica Sostenibile dei Pascoli Arborati Mediterranei. Regione Sardegna, L. 7/2007, 2019-21, iii) the INFILTRON Project (ANR-17-CE04-0010, Agence Nationale de la Recherche (ANR), France, Package for assessing infiltration & filtration functions of urban soils in stormwater management; https://infiltron.org/), iv) the Short Term Mobility (STM) Program 2019 of CNR, Italy (Research Programme: "Innovative techniques for hydraulic characterization of soil"), and v) the "fondo di Ateneo per la ricerca 2020" of the University of Sassari, Italy.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hyper-Reduced Model Based on the Proper Orthogonal Decomposition and the LU Factorization Applied to the Neutron Diffusion Eigenvalue Problem

  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Carreño, Amanda|||0000-0003-2302-1157
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Jabaloyas, E.
[EN] An efficient method for solving large eigenvalue problems efficiently can be developed using hyper-reduced order models, such as those arising from the LU Proper Orthogonal Decomposition (LUPOD). The LUPOD employs dominant orthogonal modes along with a flexible number of collocation points to establish a reduced scalar product, thereby enhancing computational efficiency to construct the reduced order model. This strategy produces accurate results when a similar number of collocation points and orthogonal modes are used. For problems where the number of available modes is small due to the high computational cost of its computation or because sufficient model accuracy can be achieved with less data, LUPOD may not yield enough precise results. This work proposes an extension of the LUPOD method to increase the number of collocation points in the reduced scalar product and consequently, the accuracy of the LUPOD. The performance of this method is illustrated with a diffusion-reaction problem with analytical solution. Then, this method is applied to solve the neutron diffusion eigenvalue problem. Numerical results for these methodologies are tested for obtaining the k-effective and the steady-state neutron flux distribution of three-dimensional nuclear reactor benchmark problems. They show that using 20 snapshots and 40% of the mesh points of the problem as collocation points speeds up the simulations by about 100 times with respect to the resolution of the full order eigenvalue problem while maintaining accurate results that differ by less than 100 pcm in the eigenvalue and less than 1.2% in the neutron flux determination., This work was supported by the Vicerrectorado de Investigacion, Universitat Politecnica de Valencia (UPV), (Grant No. PAID-06-24), Agencia Estatal de Investigacion (Grant No. PID2023-152604OB-I00), and Conselleria de Conselleria d'Educacio, Cultura, Universitats i Ocupacio, Generalitat Valenciana (Grant No. CIGE/2024/72).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Short-Term Bienenstock-Cooper-Munro Learning in Optoelectrically-Driven Flexible Halide Perovskite Single Crystal Memristors

  • Matchenya, Ivan
  • Khanas, Anton
  • Podgornyi, Roman
  • Shirkin, Daniil
  • Ekgardt, Alexey
  • Sizykh, Nikita
  • Anoshkin, Sergey
  • Krasnikov, Dmitry V.
  • Yulin, Alexei
  • Zhukov, Alexey
  • Nasibulin, Albert G.
  • Scheblykin, Ivan
  • Zenkevich, Andrei
  • Bisquert, Juan|||0000-0003-4987-4887
[EN] The transition to smart, wearable, and flexible optoelectronic devices that communicate with each other and perform neuromorphic computing at the edge, is a major goal in next-generation optoelectronics. These devices are expected to carry out their regular tasks while being supported by energy-efficient, in-memory computations. In this study, a lateral flexible device based on cesium lead tribromide perovskite single crystals integrated with single-walled carbon nanotube thin-film electrodes is presented. It is demonstrated that the device follows the Bienenstock-Cooper-Munro theory of synaptic modification under hybrid optoelectronic stimuli. This biorealistic response paves the way for the development of hybrid organic¿inorganic artificial visual systems., This work was supported by the Russian Science Foundation (project No. 23-72-00031(https://rscf.ru/prjcard_int?23-72-00031)). The authors gratefully acknowledged the Shared Research Facilities Center of Moscow Institute of Physics and Technology (SRF MIPT) for the access to the probe station and SEM. A.G.N. acknowledged the Russian Science Foundation (project No 22-13-00436) for the synthesis of carbon nanotubes. The authors thankfully acknowledged the ITMO-MIPT-Skoltech Clover Program. The authors acknowledged S. Baryshev and A. Averchenko for technical support. SEM images of ten samples (Figure S18, Supporting Information) were measured in the Advanced Imaging Core Facility (AICF) of the Skolkovo Institute of Science and Technology (Skoltech).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Achieving Control in Micro-/Nanomotor Mobility

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of volcanic ash and a C-S-H nano-additive on the manufacture of cementitious systems

  • Villarreal-Centurión, Lady Elizabeth
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Gimenez-Carbo, Ester|||0000-0002-2856-4081
[EN] Volcanic ash (VA) has been used as pozzolan with lime or cement since the Roman Empire. The 2021 volcanic eruption in Spain provided an opportunity to investigate the reactivity of freshly deposited ash. The present research work proposes studying the VA produced at the Cumbre Vieja volcano (La Palma Island, Canaries, Spain), denominated VAP. These natural waste materials exhibit pozzolanic properties, which make them suitable for use as a partial cement substitute. VA typically exhibits moderate to slow reactivity in early curing stages. VAP's pozzolanic behaviour was studied using the Frattini test, pH and electrical conductivity in lime/ VAP suspensions, and mechanical tests in mortars (15 %, 25 % and 35 % wt% Portland cement replacements with VAP). The use of nanoparticles (nanoC-S-H) as an accelerator of the mechanical properties in the mortars with VAP was analysed at short curing ages. The compressive strength values of the mortars with VAP and the nano-additive (2 % vs. the binder) showed that nanoC-S-H effectively enhanced mortars' early-age mechanical properties (measured by ultrasonic and compressive tests). At a low water/binder ratio, the strength values of the VAP-containing mortars were similar to those of the mortars containing 100 % Portland cement as a binder. All the tests support using ash from the recent eruption as a viable option for producing cement-based systems. Notably, the use of a C-S-H-based nano-additive significantly improved early-age mechanical performance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A photodetector based on the non-centrosymmetric 2D pseudo-binary chalcogenide MnIn2Se4

  • Serra, Marco
  • Antonatos, Nikolas
  • Lajaunie, Luc
  • Weng, Mouyi
  • Bastonero, Lorenzo
  • Sarkar, Kalyan Jyoti
  • Gusmao, Rui
  • Luxa, Jan
  • Bartoszewicz, Rafal
  • Ziembicki, Jakub
  • Plutnarová, Iva
  • Marzari, Nicola
  • Kudrawiec, Robert
  • Sofer, Zdenek
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Due to their attractive band gap properties and van der Waals structure, 2D binary chalcogenide materials have been widely investigated in the last decade, finding applications in several fields such as catalysis, spintronics, and optoelectronics. Ternary 2D chalcogenide materials are a subject of growing interest in materials science due to their superior chemical tunability which endows tailored properties to the devices prepared thereof. In the family of AIIBIII2XVI4, ordered ZnIn2S4-like based photocatalytic systems have been studied meticulously. In contrast, reports on disordered phases appear to a minor extent. Herein, a photoelectrochemical (PEC) detector based on the pseudo-binary MnIn2Se4 system is presented. A combination of optical measurements and DFT calculations confirmed that the nature of the bandgap in MnIn2Se4 is indirect. Its performance outclasses that of parent compounds, reaching responsivity values of 8.41 mA W-1. The role of the non-centrosymmetric crystal structure is briefly discussed as a possible cause of improved charge separation of the photogenerated charge carriers., Z. S. was supported by the ERC-CZ program (project LL2101) from the Ministry of Education Youth and Sports (MEYS). We acknowledge funding from the European Union through the 2D-PRINTABLE project (GA-101135196). This work was supported by the project "The Energy Conversion and Storage" funded as project no. CZ.02.01.01/00/22_008/0004617 by Programme Johannes Amos Commenius, call Excellent Research. N. A. acknowledges funding from the National Science Centre (NCN) Poland SONATA 19 Grant no. 2023/51/D/ST11/02588 and at Wroclaw University of Science and Technology, and this work was supported by the National Science Centre (NCN) Poland OPUS 23 no. 2022/45/B/ST7/02750. Calculations have been carried out using resources provided by Wroclaw Centre for Networking and Supercomputing. L. L. acknowledges funding from the Spanish Ministerio de Economia y Competitividad, the Ministerio de Ciencia e Innovacion MCIN/AEI/10.13039/501100011033/FEDER UE, and the European Union "NextGenerationEU"/PRTR (PID2022-140370NB-I00, RYC2021-033764-I, CPP2021-008986). The (S)TEM measurements were performed at the National Facility ELECMI ICTS ("Division de Microscopia Electronica", Universidad de Cadiz, DME-UCA). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR). L. B. and N. M. gratefully acknowledge support from the Deutsche Forschungsgemeinschaft (DFG) under Germany's Excellence Strategy (EXC 2077, no. 390741603, University Allowance, University of Bremen) and Lucio Colombi Ciacchi, the host of the "U Bremen ExcellenceChair Program". N. M. acknowledges support by the NCCR MARVEL, a National Centre of Competence in Research, funded by the Swiss National Science Foundation (grant number 205602). K. J. S. was supported by the Johannes Amos Comenius Programme, European Structural and Investment Funds, project CHEMFELLS VI (no. CZ.02.01.01/00/22_010/0008122).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Root hydrotropism is controlled via a cortex-specific growth mechanism

  • Dietrich, Daniela
  • Pang, Lei
  • Kobayashi, Akie
  • Fozard, John A.
  • Boudolf, Veronique
  • Bhosale, Rahul
  • Nguyen, Tuan
  • Hiratsuka, Sotaro
  • Fujii, Nobuharu
  • Miyazawa, Yutaka
  • Bae, Tae-Woong
  • Wells, Darren M.
  • Owen, Markus R.
  • Band, Leah R.
  • Dyson, Rosemary J.
  • Rodríguez Egea, Pedro Luís|||0000-0002-5886-9425
[EN] Plants can acclimate by using tropisms to link the direction of growth to environmental conditions. Hydrotropism allows roots to forage for water, a process known to depend on abscisic acid (ABA) but whose molecular and cellular basis remains unclear. Here we show that hydrotropism still occurs in roots after laser ablation removed the meristem and root cap. Additionally, targeted expression studies reveal that hydrotropism depends on the ABA signalling kinase SnRK2.2 and the hydrotropism-specific MIZ1, both acting specifically in elongation zone cortical cells. Conversely, hydrotropism, but not gravitropism, is inhibited by preventing differential cell-length increases in the cortex, but not in other cell types. We conclude that root tropic responses to gravity and water are driven by distinct tissue-based mechanisms. In addition, unlike its role in root gravitropism, the elongation zone performs a dual function during a hydrotropic response, both sensing a water potential gradient and subsequently undergoing differential growth., The authors thank C. Howells, K. Swarup and M. Whitworth for technical assistance, J.-K. Zhu for providing snrk2.2 snrk2.3 seeds, W. Grunewald for pDONR-L1-GAL4-VP16-R2 and S. Tsukinoki for generating WER: MIZ1-GFP(HSPter) and PIN2: MIZ1-GFP(HSPter) transgenic plants and acknowledge the following funding agencies for financial support: D.D., J.F., R.A., T.N., D.W., S.T.,C.S., S.M., M.R.O., L.R.B., R.D., O.J., J.K., J.R., T.B. and M.J.B. thank the Biological and Biotechnology Science Research Council (BBSRC) for responsive mode and CISB awards to the Centre for Plant Integrative Biology; D.W., C. S., S. M., M.R.O., J.K., T.P. and M.J.B. thank the European Research Council (ERC) for FUTUREROOTS project funding; L.R.B. thanks the Leverhulme Trust for an Early Career Fellowship; V.B., R.B. and L.D.V. are supported by grants of the Research Foundation Flanders (G. 002911N). R.B. and M. J.B. thank the Royal Society for Newton and Wolfson Research Fellowship awards; R.A., T.I.B. and M. J.B. thank the FP7 Marie Curie Fellowship Scheme; R.D. thanks the Engineering and Physical Sciences Research Council, J.D. and M. J.B. thank the GII scheme; and V.B., R.B., L.D.V. and M. J.B. thank the Interuniversity Attraction Poles Programme (IUAP P7/29 "MARS"), initiated by the Belgian Science Policy Office. R.B.P. was funded by grants from the Knut and AliceWallenberg Foundation. This work was also supported by a Grant-in-Aid for Scientific Research on Innovative Areas (No. 22120004) from the Ministry of Education, Culture, Sports, Science and Technology (MEXT) of Japan to H.T., a Grant-in-Aid for Young Scientists (B) (No. 26870057) from the Japan Society for the Promotion of Science (JSPS) to A. K., a Grant-in-Aid for Scientific Research on Innovative Areas (No. 22120002) from the Ministry of Education, Culture, Sports, Science and Technology (MEXT), Japan to A.N., a Grant-in-Aid for Scientific Research on Innovative Areas (No. 22120010) from the Ministry of Education, Culture, Sports, Science and Technology (MEXT), Japan to Y.H. and the Funding Program for Next-Generation World-Leading Researchers (GS002) to Y.M.L.P. was financially supported by a scholarship from the Japanese government. T.-W.B. was financially supported by the Funding Program for Next-Generation World-Leading Researchers (GS002) and the Grant-in-Aid for Scientific Research on Innovative Areas (No. 22120004)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sistema de Posicionamiento para Vehículos Autónomos, Positioning System for Autonomous Vehicles

  • Milanés, V.
  • Naranjo, J. E.
  • González, C.
  • Alonso, J.
  • García, R.
  • de Pedro, T.
[ES] Uno de los objetivos más importantes de los Sistemas Inteligentes de Transporte (ITS) es evitar la pérdida de precisión en el posicionamiento y guiado del vehículo, debido a la disminución en la calidad de la señal del Sistema de Posicionamiento Global (GPS). En este artículo, se presenta un sistema de posicionamiento formado por la combinación de un GPS con una unidad de medida inercial ayudada por los sensores embarcados en el coche para realizar el guiado. En función de la precisión proporcionada por el GPS, el sistema discrimina entre tres posibles comportamientos: 1) Si la precisión es centimétrica, el GPS se encarga en solitario del guiado. 2) Si no se recibe la señal GPS, el control lo toma la unidad inercial. 3) Si la precisión de la señal del GPS no es centimétrica, la posición del vehículo se calcula mediante una combinación de ambas medidas. El sistema se ha instalado en un Citroën C3 Pluriel. Los resultados muestran un correcto comportamiento del vehículo en diferentes situaciones y prueban la necesidad de integrar la información sensorial para realizar un control de navegación óptimo., [EN] Loss of accuracy in automated vehicle position control systems due to Global Positioning System (GPS) signal quality is currently one of the most studied research topics in the field of Intelligent Transportation Systems (ITS). This paper presents an integrated positioning system that combines a GPS with onboard sensors and an Inertial Measurement Unit (IMU) to perform autonomous vehicle guidance. Depending on GPS precision, the system discriminates which positioning is most appropriate from three different possibilities: 1) real-time kinematic differential global positioning system (RTK-DGPS) is working at the highest positioning accuracy (1 cm). In this instance, GPS data are used as the main sensory supply; 2) total DGPS signal loss. Now, the IMU control system takes control; 3) centimeter accuracy is lost. In this instance, GPS and IMU measurements are integrated to determine the true positioning. This system has been installed in a Citroën C3 Pluriel car, where all the actuators were automated to achieve human-like driving. Experimental results show the car's behavior in diverse situations and prove that the test-bed vehicle can maintain automatic navigation even when GPS positioning is unavailable. The results also show the need to combine sensory information to obtain optimum navigation control in any circumstance., Este trabajo ha sido realizado gracias al apoyo de los proyectos CyberCars-2 (UE STREP FP6-028062), ENVITE (Ministerio de Fomento, T7 / 06) y MARTA (CDTI, CENIT 2007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optical and morphological properties of DCM thin films co-doped of Znq2 by PVD: Theoretical and experimental investigations

  • Laouid, Amina
  • Belghiti, Amine Alaoui
  • Wisniewski, Krzysztof
  • Strzelecki, Janusz
  • Karakas, Asli
  • Gozutok, Aysun
  • El Kouari, Youssef
  • Tlemçani, Mouhaydine
  • Plociennik, Przemyslaw
  • Hajjaji, Abdelowahed
  • Zawadzka, Anna
  • Bouich, Amal|||0000-0001-6745-8831
[EN] In this article, new experimental results of the morphological and optical properties of thin films of 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran co-doped by 8-hydroxyquinoline zinc (Znq(2)) for different concentrations were presented. The physical vapor deposition in a high vacuum was used to create the thin films on glass substrates with a thickness of 100 nm. The morphological properties of the samples were identified using the Atomic Force Microscopy (AFM) apparatus in tapping mode. TEM images show amorphous structures. The phase composition of the samples was assessed using FTIR methods. The Tauc plot approach was used to examine the measured transmittance spectra in order to estimate the energy gap. Analysis of the results showed that the co-doping of DCM thin film by Znq(2) influenced the structural and optical properties of the samples. To evaluate the experimental results found, theoretical calculations based on the maximum one -photon absorption (OPA) wavelengths of DCM and Znq(2) have been first measured through the UV-Vis spectral technique. Then, the experimental conclusions on values for DCM and Znq(2) have been compared with their corresponding simulation data procured from the time-dependent self -consistent -field (TD-SCF) computation utilizing the density functional theory (DFT) at B3LYP/6-311G(d,p) level. Besides, we have explored the first and second frontier molecular orbitals (MOs) for title compounds and their energy gaps via the DFT procedure. The calculations of maximum OPA wavelengths and the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) contributions on both molecules have also been crosschecked with the results of already published data in the literature., This research has been financed from the funds of the Polish National Science Centre (grant no. 2017/25/B/ST7/02124) . The films used in this paper were obtained using the Interdisciplinary Centre for Modern Technologies facilities, NCU, Torun, Poland. The research was carried out as part of the IDUB project-emerging research fields: "Material Science and Technology". The author Amal Bouich acknowledges MCIN for funding support through Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033) and NextGenerationEU.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A comprehensive review of optical fiber refractometers: toward a standard comparative criterion

  • Urrutia Azcona, Aitor
  • Del Villar, Ignacio
  • Zubiate Orzanco, Pablo
  • Ruiz Zamarreño, Carlos
Thanks to the peculiarities of optical fiber and its ability to be combined with nanotechnology, precise and accurate measurements of the changes in optical properties (i.e., refractive index) of the medium surrounding the fiber are becoming possible with a high degree of performance. Thus, optical fiber sensors (OFSs) are increasingly finding applications in biochemistry and biomedicine. Here, all types of optical fiber refractometers are covered, and they are classified into three main groups: interferometers, grating-based structures, and resonance-based structures (the resonance is induced by coating the optical fiber sensor with a thin film). The performance of these different structures is compared by means of the most common parameters: sensitivity, full width at half minimum or maximum, figure of merit, and quality factor. The aim here is to provide a reliable and easy-to-use tool to compare the performance of the most recent developments on fiber optic refractometers., This work was supported by the Government of Navarra (projects with references 72/2015 and PC021-022) and by the Spanish Agencia Estatal de Investigacion (AEI) and European Regional Development Fund (FEDER)(TEC2016-78047-R)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Femtomolar detection by nanocoated fiber label-free biosensors

  • Chiavaioli, Francesco
  • Zubiate Orzanco, Pablo
  • Del Villar, Ignacio
  • Ruiz Zamarreño, Carlos
  • Giannetti, Ambra
  • Tombelli, Sara
  • Trono, Cosimo
  • Arregui San Martín, Francisco Javier
  • Matías Maestro, Ignacio
  • Baldini, Francesco
The advent of optical fibre-based biosensors combined with that of nanotechnologies has provided an oppor-tunity for developing in situ, portable, lightweight, versatile and high-performance optical sensing platforms. We report on the generation of lossy mode resonances by the deposition of nm-thick metal oxide films on optical fibres, which makes it possible to measure precisely and accurately the changes in optical properties of the fibre-surrounding medium with very high sensitivity compared to other technology platforms, such as long period gratings or surface plasmon resonances, the gold standard in label-free and real-time biomolecular interaction analysis. This property, combined with the application of specialty structures such as D-shaped fibres, permits enhancing the light-matter interaction. SEM and TEM imaging together with X-EDS tool have been utilised to characterise the two films used, i.e. indium tin oxide and tin dioxide. More-over, the experimental transmission spectra obtained after the deposition of the nanocoatings have been numerically cor-roborated by means of wave propagation methods. With the use of a conventional wavelength interrogation system and ad-hoc developed microfluidics, the shift of the lossy mode resonance can be reliably recorded in response to very low analyte concentrations. Repeated experiments confirm a big leap in performance thanks to the capability to detect femtomolar concentrations in human serum, improving the detection limit by three orders of magnitude when compared with other fibre-based configurations. The biosensor has been regenerated several times by injecting sodium dodecyl sul-phate, which proves the capability of sensor to be reused., This work was supported by the European Community for theproject Hemospec (FP7-611682), by the National ResearchCouncil of Italy (CNR) for the Short Term Mobility program2017, by the Government of Navarra (project no. 72/2015)and by the Spanish Agencia Estatal de Investigación (AEI) andEuropean Regional Development Fund (FEDER) (TEC2016-78047-R, TEC2016-79367-C2-2-R).
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Tesis doctoral (DoctoralThesis)

Estudios Experimentales sobre el metabolismo de la producción de hidrógeno en consorcios de Algas-bacterias, Experimental Study and Modeling the Metabolism of Hydrogen Production in Algae-Bacteria Consortia

  • Fakhimi, Neda
El hidrógeno molecular (H2) se considera una fuente de energía limpia y de alto contenido energético. La producción fotobiológica de H2 por algas verdes puede ser un método limpio y renovable para la generación de este gas. Chlamydomonas reinhardtii (Chlamydomonas) es una microalga verde unicelular capaz de llevar a cabo la foto-producción de H2. En este trabajo se estudia el efecto que la intensidad lumínica y diferentes fuentes de carbono y nitrógeno tienen en la producción de H2 en co-cultivos de Chlamydomonas con diferentes bacterias. El objetivo general es obtener un mejor conocimiento sobre cómo las interacciones alga-bacteria pueden mejorar la producción de H2. Primero, se estudiaron co-cultivos de Chlamydomonas con diferentes bacterias (Pseudomonas spp., Escherichia coli y Rhizobium etli) en medios ricos, con acetato como fuente de carbono y a tres intensidades de luz diferentes (12, 50 y 100 PPFD). El aumento de 0.87 a 18.2 ml de H2/L de cultivo fue la mayor mejora en la producción de H2 que se obtuvo cuando Chlamydomonas se cocultivó con Pseudomonas putida 12264 bajo 100 PPFD. Se obtuvieron mejoras en la producción de H2 en co-cultivos respecto a los monocultivos del alga. Estas mejoras estaban claramente relacionadas con la menor capacidad de los co-cultivos para consumir el ácido acético de los medios. Cuanto más tiempo permaneció el ácido acético en el medio, mayor fue la producción de H2. En el segundo estudio se observó que en co-cultivos incubados con azúcares como única fuente de carbono, la foto-producción de H2 por parte del alga es posible cuando las bacterias producían ácido acético. También observamos que el cocultivo de Chlamydomonas con Escherichia coli condujo a una producción sinérgica de H2 que produjo un 60% más de H2 en cocultivos en comparación con la suma de la producción en monocultivos de alga y bacteria. La acumulación de ácido acético es uno de los principales inconvenientes de la producción fermentativa de H2 llevada a cabo por bacterias. Sin embargo, este inconveniente puede convertirse en una ventaja cuando las bacterias productoras de H2 se cultivan conjuntamente con Chlamydomonas. En un tercer estudio, tres cepas de bacterias (Stenotrophomonas sp., Microbacterium sp. y Bacillus sp.) fueron aisladas e identificadas de una comunidad de bacterias silvestres. Se observó que Microbacterium es un socio bacteriano mutualista para Chlamydomonas en término de crecimiento. En medios de cultivo suplementados con azúcares y fuentes de nitrógeno inorgánico, Microbacterium no pudo crecer de forma aislada, sin embargo, sí lo pudo hacer cuando se co-cultivó con Chlamydomonas. Posiblemente el alga permite el crecimiento de Microbacterium al proporcionar nutrientes esenciales, probablemente fuentes de nitrógeno orgánico. Por otro lado, la producción de ácido acético por parte de Microbacterium, a partir de la fermentación de azúcares, favorece el crecimiento de Chlamydomonas y la fotoproducción de H2. Bajo esta cooperación, se produjo una cantidad considerable de H2, 313 ml/L de cultivo en cocultivos de Chlamydomonas-Microbacterium en medios ricos en azúcar. Finalmente, se logró un nivel aceptable de coordinación entre los resultados del modelado y los datos empíricos en términos de crecimiento, producción de H2 y absorción de ácido acético, tanto en co-cultivos de Chlamydomonas-Pseudomonas putida como en los monocultivos control. Este modelo de red metabólica basado en restricciones puede ser prometedor para predecir el comportamiento de organismos en sistemas de mono y co-cultivo., Hydrogen gas (H2) is considered a clean energy carrier with a very high energy content per mass. Photobiological production of H2 by green algae can potentially be a clean and renewable method for H2 generation. Chlamydomonas reinhardtii (Chlamydomonas) is a model unicelular green microalga capable of H2 photoproduction. In this work we studied the effect of light intensity and different carbon and nitrogen sources on H2 production in Chlamydomonas-bacteria co-cultures to gain a better knowledge on how alga-bacteria interactions can improve H2 production. First, we studied co-cultivation of Chlamydomonas with different bacteria, including Pseudomonas spp., Escherichia coli and Rhizobium etli cultured in acetate-containing nutrientreplete media at three different light intensities (12, 50 and 100 PPFD). Increasing from 0.87 to 18.2 ml H2/L culture, was the highest enhancement in H2 production which was obtained when Chlamydomonas was co-cultivated with Pseudomonas putida 12264 under 100 PPFD. Enhancement of H2 production in co-cultures was clearly related to the lower capacity of these co-cultures to consume the acetic acid from the media. The longer the acetic acid remained in the media, the longer the cultures were able to sustain hypoxia and support H2 production. Then, we found out that algal H2 photoproduction is possible in Chlamydomonas-bacteria co-cultures grow on sugars as the only carbon source when acetic acid is produced by the bacteria. These results suggested that acetic acid assimilation is linked to H2 production beside its ability to promote oxygen consumption. We also observed that co-culturing Chlamydomonas with Escherichia coli led to synergetic H2 production that 60% more H2 was produced in co-cultures compared with the sum of production in alga and bacterium monocultures. The accumulation of acetic acid is one of the main drawbacks of the dark fermentative H2 production. However, this drawback could be switched into an advantage when H2 producing bacteria are co-cultivated with Chlamydomonas. In the following, three bacteria strains including Stenotrophomonas sp., Microbacterium sp. and Bacillus sp. were isolated and identified from an unknown bacteria community. Microbacterium was found to be a mutualistic bacterial partner for Chlamydomonas in term of growth. In culture media supplemented with sugars and inorganic nitrogen source, Microbacterium alone was not able to grow, however it grew when co-cultivated with Chlamydomonas. It seemed that this alga allowed Microbacterium growth by providing essential key nutrients, probably organic nitrogen sources. On the other hand, Microbacterium was able to produce acetic acid through fermentation of sugars which favors Chlamydomonas growth and H2 production. Following this cooperative relationship, a considerable amount of H2, 313 ml/L culture was produced in Chlamydomonas- Microbacterium co-cultures in sugar-rich media. Finally, an acceptable level of coordination between the results of modeling and the empirical data in terms of growth, H2 production and acetic acid uptake in Chlamydomonas-Pseudomonas putida co-cultures and pure control cultures was achieved. Therefore, constraint-based metabolic network model can be a promising potential to predict and especially compare the behavior of organisms in mono- and co-culture systems.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Algae-Bacteria Consortia as a Strategy to Enhance H2 Production

  • Fakhimi, Neda
  • González Ballester, David
  • Fernández, Emilio
  • Galván Cejudo, Aurora
  • Dubini, A
Biological hydrogen production by microalgae is a potential sustainable, renewable and clean source of energy. However, many barriers limiting photohydrogen production in these microorganisms remain unsolved. In order to explore this potential and make biohydrogen industrially affordable, the unicellular microalga Chlamydomonas reinhardtii is used as a model system to solve barriers and identify new approaches that can improve hydrogen production. Recently, Chlamydomonas–bacteria consortia have opened a new window to improve biohydrogen production. In this study, we review the different consortia that have been successfully employed and analyze the factors that could be behind the improved H2 production.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Stenotrophomonas goyi sp. nov., a novel bacterium associated with the alga Chlamydomonas reinhardtii

  • Torres, María Jesús
  • Fakhimi, Neda
  • Dubini, A
  • González Ballester, David
Background: A culture of the green algae Chlamydomonas reinhardtii was accidentally contaminated with three different bacteria in our laboratory facilities. This contaminated alga culture showed increased algal biohydrogen production. These three bacteria were independently isolated. Methods: The chromosomic DNA of one of the isolated bacteria was extracted and sequenced using PacBio technology. Tentative genome annotation (RAST server) and phylogenetic trees analysis (TYGS server) were conducted. Diverse growth tests were assayed for the bacterium and for the alga-bacterium consortium. Results: Phylogenetic analysis indicates that the bacterium is a novel member of the Stenotrophomonas genus that has been termed in this work as S. goyi sp. nov. A fully sequenced genome (4,487,389 base pairs) and its tentative annotation (4,147 genes) are provided. The genome information suggests that S. goyi sp. nov. is unable to use sulfate and nitrate as sulfur and nitrogen sources, respectively. Growth tests have confirmed the dependence on the sulfur-containing amino acids methionine and cysteine. S. goyi sp. nov. and Chlamydomonas reinhardtii can establish a mutualistic relationship when cocultured together. Conclusions: S. goyi sp. nov. could be of interest for the design of biotechnological approaches based on the use of artificial microalgae-bacteria multispecies consortia that take advantage of the complementary metabolic capacities of their different microorganisms.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Acetic acid is key for synergetic hydrogen production in Chlamydomonas-bacteria co-cultures

  • Fakhimi, Neda
  • Dubini, A
  • Tavakoli, Omid
  • González Ballester, David
Embargado hasta 01/01/2100, This study is a proof of concept for the synergetic biohydrogen production in alga-bacteria co-cultures. Algal hydrogen photoproduction was obtained in sugar-containing media only when the green alga Chlamydomonas reinhardtii was co-cultured with Pseudomonas putida (40.8 ml H2·L−1), Escherichia coli (35.1 ml H2·L−1) and Rhizobium etli (16.1 ml H2·L−1). Hydrogen photo-production in these co-cultures was not only linked to the induction of hypoxia, but to the ability of the bacteria to produce acetic acid from sugars. Synergetic hydrogen production was achieved by integrating the photobiological and fermentative production in Chlamydomonas and Escherichia coli co-cultures supplemented with glucose, which resulted in 60% more H2 production than the sum of the respective monocultures. This cooperation relied on the ability of the alga to consume the excreted bacterial acetic acid, which benefited both bacterial and algal hydrogen production. This knowledge may open new possibilities for the biohydrogen production from industrial wastes.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Acetic acid uptake rate controls H2 production in Chlamydomonas-bacteria co-cultures

  • Fakhimi, Neda
  • Tavakoli, Omid
  • Marashi, Sayed-Amir
  • Moghimi, Hamid
  • Mehrnia, Mohammad Reza
  • Dubini, A
  • Gonzalez-Ballester, David
Photobiological hydrogen production by green microalgae is considered as a promising alternative for renewable biofuel production. We have evaluated hydrogen production in the model microalga Chlamydomonas reinhardtii in co-cultures with different bacteria, including Pseudomonas spp., Escherichia coli and Rhizobium etli cultured in acetate-containing nutrient-replete media at three different light intensities (12, 50 and 100 PPFD). Co-culturing Pseudomonas spp. with Chlamydomonas can significantly improve algal hydrogen production, especially at moderate to high light intensities (50–100 PPFD). Enhancement of hydrogen production in co-cultures was clearly related to the lower capacity of these co-cultures to consume the acetic acid from the media. The longer the acetic acid remained in the media, the longer the cultures were able to sustain hypoxia and support hydrogen production.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Ferredoxin5 Deletion Affects Metabolism of Algae during the Different Phases of Sulfur Deprivation

  • Subramanian, Venkataramanan
  • Wecker, Matt S.A.
  • Gerritsen, Alida
  • Boehm, Marko
  • Xiong, Wei
  • Wachter, Benton
  • Dubini, A
  • González Ballester, David
  • Antonio, Regina V.
  • Ghirardi, Maria L.
Ferredoxin5 (FDX5), a minor ferredoxin protein in the alga Chlamydomonas (Chlamydomonas reinhardtii), helps maintain thylakoid membrane integrity in the dark. Sulfur (S) deprivation has been used to achieve prolonged hydrogen production in green algae. Here, we propose that FDX5 is involved in algal responses to S-deprivation as well as to the dark. Specifically, we tested the role of FDX5 in both the initial aerobic and subsequent anaerobic phases of S-deprivation. Under S-deprived conditions, absence of FDX5 causes a distinct delay in achieving anoxia by affecting photosynthetic O2 evolution, accompanied by reduced acetate uptake, lower starch accumulation, and delayed/lower fermentative metabolite production, including photohydrogen. We attribute these differences to transcriptional and/or posttranslational regulation of acetyl-CoA synthetase and ADP-Glc pyrophosphorylase, and increased stability of the PSII D1 protein. Interestingly, increased levels of FDX2 and FDX1 were observed in the mutant under oxic, S-replete conditions, strengthening our previously proposed hypothesis that other ferredoxins compensate in response to a lack of FDX5. Taken together, the results of our omics and pull-down experiments confirmed biochemical and physiological results, suggesting that FDX5 may have other effects on Chlamydomonas metabolism through its interaction with multiple redox partners.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Capítulo o parte de un libro (BookPart)

Photosynthesis | Algal Hydrogen Production

  • Fakhimi, N
  • Dubini, A
Embargado hasta 01/01/2100, Hydrogen (H2) is an attractive renewable source of energy since it is the only gas that is carbon neutral. Indeed, when oxidized, H2 generates water and does not release CO2 in the atmosphere. Thus, it is the only source of energy that is 100% clean, nonpolluting and also it has better energy properties compared with other biofuels. There are many ways to produce H2 but most of the processes like biomass gasification/pyrolysis, electrolysis/thermochemical treatment of water or producing H2 from fossil fuels, are either energy intensive or produce pollutants like CO/CO2 (Khetkorn et al., 2017). Instead, biological hydrogen production is a promising approach to produce H2 since microbes produce H2 at ambient temperatures and atmospheric pressures, which does not require excessive energy (Das and Veziroǧlu, 2001). Green algae produce H2 by requiring sunlight, water and CO2, which makes this approach a very simple and ecologic way of H2 production (Ghirardi et al., 2000). Thus, in theory, photobiological H2 evolution is a promising sustainable technology that may satisfy some of the world´s energy requirement in the future (Chandrasekhar et al., 2015). Researchers are therefore very interested in understanding how hydrogen metabolism functions in algae and how H2 production can be optimized.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Microalgae for bioremediation: advances, challenges, and public perception on genetic engineering

  • Calatrava, Victoria
  • González Ballester, David
  • Dubini, A
The increase in the global population and industrial activities has led to an extensive use of water, the release of wastewater, and overall contamination of the environment. To address these issues, efficient treatment methods have been developed to decrease wastewater nutrient content and contaminants. Microalgae are a promising tool as a sustainable alternative to traditional wastewater treatment. Furthermore, the biomass obtained from the wastewater treatment can be used in different applications, having a positive economic impact. This review describes the potential of microalgae as a biological wastewater remediation tool, including the use of genetically engineered strains. Their current industrial utilization and their untapped commercial potential in terms of bioremediation are also examined. Finally, this work discusses how microalgal biotechnology is perceived by the public and governments, analyses the potential risks of microalgae to the environment, and examines standard procedures that can be implemented for the safe biocontainment of large-scale microalgae cultures.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessing forest availability for wood supply in Europe

  • Alberdi, Iciar
  • Bender, Susann
  • Riedel, Thomas
  • Avitabile, V.
  • Boriaud, O.
  • Bosela, Michal
  • Camia, Andrea
  • Cañellas, Isabel
  • Castro Rego, Francisco
  • Fischer, Christoph
  • Freudenschuss, A.
  • Fridman, Jonas
  • Gasparini, P.
  • Gschwantner, Thomas
  • Guerrero, Silvia
  • Kjartansson, B T.
  • Kucera, Milos
  • Lanz, Adrian
  • Marin, Gheorghe
  • Mubareka, S.
  • Notarangelo, Monica
  • Nunes, Leónia
  • Pesty, B.
  • Pikula, T.
  • Redmond, John
  • Rizzo, M.
  • Sebeň, Vladimír
  • Snorrason, A.
  • Tomter, Stein Michael
  • Hernández Mateo, Laura
14 Pág., The quantification of forests available for wood supply (FAWS) is essential for decision-making with regard to the maintenance and enhancement of forest resources and their contribution to the global carbon cycle. The provision of harmonized forest statistics is necessary for the development of forest associated policies and to support decision-making. Based on the National Forest Inventory (NFI) data from 13 European countries, we quantify and compare the areas and aboveground dry biomass (AGB) of FAWS and forest not available for wood supply (FNAWS) according to national and reference definitions by determining the restrictions and associated thresholds considered at country level to classify forests as FAWS or FNAWS. FAWS represent between 75 and 95 % of forest area and AGB for most of the countries in this study. Economic restrictions are the main factor limiting the availability of forests for wood supply, accounting for 67 % of the total FNAWS area and 56 % of the total FNAWS AGB, followed by environmental restrictions. Profitability, slope and accessibility as economic restrictions, and protected areas as environmental restrictions are the factors most frequently considered to distinguish between FAWS and FNAWS. With respect to the area of FNAWS associated with each type of restriction, an overlap among the restrictions of 13.7 % was identified. For most countries, the differences in the FNAWS areas and AGB estimates between national and reference definitions ranged from 0 to 5 %. These results highlight the applicability and reliability of a FAWS reference definition for most of the European countries studied, thereby facilitating a consistent approach to assess forests available for supply for the purpose of international reporting., This research was supported by the Specific contract n. 18 “Use of National Forest Inventories data to estimate area and above ground biomass in European forests not available for wood supply” in the context of the Framework contract for the provision of forest data and services supporting the European Forest Data Centre 2012/ S 78-127532 of 21/04/2012 of the Joint Research Centre of the European Commission; the EG-013-72 agreement of the Ministry of Agriculture, Fisheries and Food (MAPA) and the INIA belonging to the Spanish Ministry of Science and Innovation (MICINN); and the project No.APVV-15-0265 granted by the Slovak Research and Development Agency., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Dynamics of Green Sahara Periods and Their Role in Hominin Evolution

  • Larrasoaña, J.C.
  • Roberts, A.P.
  • Rohling, E.J.
Astronomically forced insolation changes have driven monsoon dynamics and recurrent humid episodes in North Africa, resulting in green Sahara Periods (GSPs) with savannah expansion throughout most of the desert. Despite their potential for expanding the area of prime hominin habitats and favouring out-of-Africa dispersals, GSPs have not been incorporated into the narrative of hominin evolution due to poor knowledge of their timing, dynamics and landscape composition at evolutionary timescales. We present a compilation of continental and marine paleoenvironmental records from within and around North Africa, which enables identification of over 230 GSPs within the last 8 million years. By combining the main climatological determinants of woody cover in tropical Africa with paleoenvironmental and paleoclimatic data for representative (Holocene and Eemian) GSPs, we estimate precipitation regimes and habitat distributions during GSPs. Their chronology is consistent with the ages of Saharan archeological and fossil hominin sites. Each GSP took 2-3 kyr to develop, peaked over 4-8 kyr, biogeographically connected the African tropics to African and Eurasian mid latitudes, and ended within 2-3 kyr, which resulted in rapid habitat fragmentation. We argue that the well-dated succession of GSPs presented here may have played an important role in migration and evolution of hominins.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The Spanish GIRO guideline: a paradigm shift in the management of obesity in adults.

  • Lecube, Albert
  • Azriel, Sharona
  • Barreiro, Esther
  • Blay, Guadalupe
  • Carretero-Gómez, Juana
  • Ciudin, Andreea
  • Fernández, José Manuel
  • Flores, Lilliam
  • Hollanda, Ana de
  • Martínez, Eva
  • Miñambres, Inka
  • Moize, Violeta
  • Morales, Cristóbal
  • Ramírez, Violeta
  • Salvador, Javier
  • Soler, María José
  • Supervía, Marta
  • Valentí, Víctor
  • Vicente-Rodríguez, Germán
  • Vilarrasa, Nuria
  • Malagón, María M.
Introduction: Current obesogenic environments, along with intrinsic factors, contribute to the obesity pandemic, which impacts the quality of life and healthcare for individuals with obesity. In addition, discrimination and stigma related to obesity remain widespread in our society. In this scenario, the Spanish Society for the Study of Obesity (SEEDO), in collaboration with 38 recognized scientific societies and 12 patients’ organisation, have elaborated the Spanish guideline for obesity management in adults, referred to as the GIRO guideline. GIRO aims to drive a shift in obesity management and serve as a guide for healthcare professionals (HCPs) to address this chronic and multifactorial disease. Methods: A comprehensive systematic review was conducted and completed with experts’ contribution, with a particular focus on Spanish society. The quality of evidence was assessed using the Grading of Recommendations, Assessment, Development and Evaluation (GRADE) system. Experts selected the recommendations and determined their strength through consensus. Results: A total of 121 recommendations were proposed, including 32 adopted from the Canadian Adult Obesity Clinical Practice Guidelines and 89 specific recommendations created for the Spanish context, distributed across five areas of application: 1) Recognition of obesity as a chronic disease; 2) Obesity assessment; 3) Multidisciplinary approach to obesity treatment; 4) Recommendations for obesity management in special populations; and 5) Implementation of the GIRO guideline and future challenges. Conclusion: The GIRO recommendations are intended to serve as a useful and interactive tool for HCPs, policymakers and other stakeholders to ensure access to and quality of healthcare for individuals living with obesity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Advanced footwear technology in well-trained athletes: methodological insights from outdoor running

  • Muñiz-Pardos, Borja
  • Angeloudis, Konstantinos
  • Zelenkova, Irina
  • Guppy, Fergus M.
  • Marco-Contreras, Luis A.
  • Gomez-Bruton, Alejandro
  • Lozano-Berges, Gabriel
  • Pitsiladis, Yannis
  • Casajus, Jose A.
Background: Advanced footwear technology (AFT) is reported to elicit an approximate 4% average improvement in running economy (RE). However, a large inter-individual variability remains unexplained, and limited research examined the impact of AFT during outdoor running. The aim was to compare the physiological, biomechanical and perceptual responses of 36 well-trained athletes to running outdoors using three different AFT and a traditional racing shoe. Methods: Thirty-six well-trained athletes (19 males and 17 females) had their maximal aerobic capacity ( ˙ V O2max) and anaerobic threshold (AT) determined in laboratory conditions and were familiarised to the different shoe running conditions. Within 7 days, athletes ran 4 × 6 min running bouts, paced outdoors at 95% of their individual AT with 10 min recovery, in three different AFT conditions and a traditional flat. Oxygen uptake ( ˙ V O2), heart rate, rating of perceived exertion (RPE), lactate, shoe perception, and biomechanical responses were compared between the four running trials. Results: No differences were observed in the RE between shoe conditions, with a great inter-individual variability (range: 12% impairment to 14% improvement in RE). This variability was accompanied by a significant ˙ V O2 order effect across exercise bouts (bout 2 lower than one [-1.1 mL/kg/min, p = 0.002]; bout 3 lower than 2 [-0.8 mL/kg/min, p = 0.027]; no differences between bouts 3 and 4). This variability was likely due to methodological issues such as one squared-wave RE measurement per shoe condition or the lack of a mirrored experimental design, among others. There was no order effect in other physiological or biomechanical variables. No significant differences were found in lactate, heart rate or rate of perceived exertion between running trials. Biomechanical responses to the different shoe conditions were also highly variable. One of the advanced AFT shoes showed a greater strike angle (+2.07°; p = 0.001), with no other significant differences between shoes conditions. Conclusion: The large variability in the physiological response to AFT may be explained by methodological considerations. A minimum of two-bout RE measurements, the use of a mirrored order, a sufficient familiarisation with shoes and experimental designs, among other considerations, seem crucial to enhance the ecological validity and reduce data variability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Physical fitness cut‐points for early detection of obesity risk in preschool children

  • Herrada-Robles, Maria
  • Labayen, Idoia
  • Castro-Piñero, José
  • Martínez-Vizcaíno, Vicente
  • Rojo-Tirado, Miguel A.
  • Moliner-Urdiales, Diego
  • Sanchís-Moysi, Joaquín
  • Vidal-Conti, Josep
  • Vicente-Rodriguez, German
  • Tomkinson, Grant R.
  • Cadenas-Sanchez, Cristina
Objective: This study aimed to establish cut-points for cardiorespiratory fitness, muscular strength, and speed-agility and to evaluate their ability to detect general and central obesity risk in preschool children aged 3–5 years. Methods: Briefly, 3179 Spanish preschoolers (52.8% boys) were evaluated. Physical fitness was assessed with the PREFIT battery. Anthropometry included BMI and waist circumference. Obesity risk was defined using age- and sex-specific percentiles according to criteria established by the World Health Organization and the International Diabetes Foundation. Receiver operating characteristic curve analyses were used to identify fitness cut-points. Results: Age- and sex-specific cut-points were established. For cardiorespiratory fitness, cut-points ranged from 9.5 to 23.5 laps in boys and 6.5 to 21.5 in girls across the 3– to 5-year age range. Muscular strength cut-points ranged from z-scores of −1.5 to 2.2 in boys and −1.6 to 1.9 in girls. Speed-agility cut-points ranged from 18.8 to 14.9 s in boys and 19.9 to 15.3 s in girls. Predictive accuracy was moderate-to-high (AUC range: 0.61–0.74 for cardiorespiratory fitness, 0.59–0.80 for strength, 0.49–0.71 for speed-agility). Conclusions: This study provides fitness cut-points for detecting general and central obesity risk in preschoolers. Early integration of physical fitness assessments into health monitoring may facilitate early identification of obesity risk.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimizing Performance in Women Futsal: Impact of Neuromuscular Training on Speed, Change of Direction, and Repeated Sprint Ability

  • Albalad-Aiguabella, Rafael
  • Mainer-Pardos, Elena
  • Gadea-Uribarri, Héctor
  • Vicente-Rodríguez, Germán
  • Muniz-Pardos, Borja
Albalad-Aiguabella, R, Mainer-Pardos, E, Gadea-Uribarri, H, Vicente-Rodríguez, G, and Muniz-Pardos, B. Optimizing performance in women futsal: impact of neuromuscular training on speed, change of direction, and repeated sprint ability. J Strength Cond Res 40(4): e385–e396, 2026—This study aimed to examine the effects of 2 different weekly volumes of a neuromuscular training program (NMTP) on sprinting, change of direction (COD), and repeated sprint ability (RSA) in well-trained female futsal players. Thirty-eight players from 3 second division Spanish League teams were assessed pre- and postintervention using photoelectric cells for linear sprint times (5, 10, 15, and 25 m), COD tests (V-Cut, L-Run right and left, and modified 505), and RSA. Subjects completed a 12-week NMTP performed once per week (EG1; n = 14), twice per week (EG2; n = 12), or continued traditional resistance training as a control group (CG; n = 12). EG1 significantly improved 10 m (p = 0.04) and 15 m (p = 0.01) sprint times, V-Cut (p < 0.01), and L-Run right and left (p < 0.01). Two-factor repeated measures analysis of variance showed no significant differences in mean change between EG1 and EG2 for any sprint, COD, or RSA measure (all p > 0.05), indicating that increasing to 2 weekly NMTP sessions did not provide additional benefits. Control group showed reductions in sprint performance for 10 and 25 m, in 505 left, and in all RSA sprints. These findings indicate that 1 weekly NMTP session can improve sprint and COD performance in well-trained female futsal players, whereas increasing to 2 weekly sessions does not provide further benefits. In contrast, continuing traditional resistance training may reduce sprint and RSA performance, highlighting the importance of incorporating sport-specific neuromuscular training into in-season conditioning programs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Temporal Trends in Health-Related Components of Physical Fitness of European Children and Adolescents from 1965 to 2025: A Systematic Review of Data on 417,362 Participants from 20 Countries

  • Domingo-del-Val, Daniel
  • Lozano-Berges, Gabriel
  • Moradell, Ana
  • Gómez-Bruton, Alejandro
  • Matute-Llorente, Ángel
  • Casajús, José Antonio
Background Physical fitness is an important indicator of health during childhood and adolescence. Several components of physical fitness showed declining trends, with periods of acceleration or stabilisation depending on the component. Although Europe is the most studied continent, existing reviews have largely relied on single-test approaches or descriptive summaries, without simultaneously examining all health-related components, accounting for between-study variability analyses, or extending monitoring beyond 2014 to include the COVID-19 pandemic. This systematic review aims to analyse temporal trends of health-related components of physical fitness in European children and adolescents aged 6–16 years, examining differences by sex and age groups. Methods A systematic search was conducted in PubMed, Web of Science, SPORTDiscus and Scopus up to December 2025. Eligible studies were conducted in European countries and included children and adolescents aged 6–16 years, using repeated cross-sectional designs and reporting physical fitness components at two or more time points including sample sizes, means and standard deviations. Study quality was assessed with a modified Downs and Black checklist. Data were standardised into z scores based on sample-weighted means and standard deviations, considering the study, physical fitness component, sex and age. Linear mixed models were developed for each physical fitness component to estimate trends (linear, quadratic or cubic) and interactions by sex or age group. Results Thirty-eight studies were included, representing 417,362 children and adolescents, from 20 European countries between 1965 and 2023. Cardiorespiratory endurance increased until the 1980s, then declined with a deceleration between 2015 and 2023. Body composition decreased linearly up to 2022, more markedly among males. Upper-body strength declined from the 1970s to 2020s, stabilising between the 1980s and 2000s. Lower-body strength increased until the 1980s and declined until 2023. Flexibility declined continuously, with an accelerated decrease after the 2000s. Conclusions Health-related components of physical fitness showed persistent declines among European children and adolescents, with differences in the shape and magnitude of trends. These findings highlight the heterogeneity of the available evidence and the need for a standardised, valid and feasible European fitness test battery. Public initiatives should continue to promote adherence to physical activity guidelines, particularly muscle-strengthening recommendations.
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

A systematic mapping study on software quality control techniques for assessing privacy in information systems

  • Guamán Loachamín, Danny Santiago
  • Álamo Ramiro, José María del|||0000-0002-6513-0303
  • Caiza Ñacato, Julio César|||0000-0001-9910-582X
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

GDPR compliance assessment for cross-border personal data transfers in Android apps

  • Guamán Loachamín, Danny Santiago
  • Álamo Ramiro, José María del|||0000-0002-6513-0303
  • Caiza Ñacato, Julio César|||0000-0001-9910-582X
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

An exploratory experiment on privacy patterns: limitations and possibilities

  • Caiza, Julio C.
  • Álamo Ramiro, José María del|||0000-0002-6513-0303
  • Guamán, Danny S.
  • Jaramillo Álcazar, Ángel
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Privacy Assessment in Android Apps: A Systematic Mapping Study

  • Álamo Ramiro, José María del|||0000-0002-6513-0303
  • Guamán Loachamín, Danny Santiago|||0000-0003-2794-3079
  • Balmori Pérez Urria, Belén|||0000-0001-5345-7467
  • Díez Medialdea, Ana|||0000-0002-4055-8661
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

A systematic mapping study on automated analysis of privacy policies

  • Álamo Ramiro, José María del|||0000-0002-6513-0303
  • Guamán Loachamín, Danny Santiago|||0000-0003-2794-3079
  • García Gutiérrez, Boni
  • Díez Bermejo, Ana|||0000-0001-8524-7501
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Enhancing Web Applications Observability through Instrumented Automated Browsers

  • García Gutiérrez, Boni|||0000-0003-1808-8410
  • Ricca, Filippo
  • Álamo Ramiro, José María del|||0000-0002-6513-0303
  • Leotta, Maurizio
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Energy Valorization Strategies in Rural Renewable Energy Communities: A Path to Social Revitalization and Sustainable Development

  • Sanz Cuadrado, Cristina|||0000-0002-0080-8195
  • Narvarte Fernández, Luis|||0000-0002-6289-7605
  • Cristóbal López, Ana Belén|||0000-0002-4314-6160
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Resource-efficient demetallization of silicon solar cells by alkaline etching: Silver recovery and solution reutilization

  • López, Juan Manuel
  • Vázquez Adán, Alejandra
  • Díez Alcántara, Eduardo|||0000-0001-9796-396X
  • Dasilva Villanueva, Nerea|||0000-0002-0111-6510
  • Caballero Jiménez, Luis Jaime|||0009-0009-9916-4630
  • Fuertes Marrón, David|||0000-0002-9493-9902
  • Cañizo Nadal, Carlos del|||0000-0003-1287-6854
  • Rodríguez Rodríguez, Araceli|||0000-0003-3661-5798
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Assessment of bypass diodes and cell interconnections in 1 kW-Class thermophotovoltaic modules under highly non-uniform irradiance conditions

  • Izquierdo Pais, Ignacio|||0000-0003-3518-7381
  • García-Linares Fontes, Pablo|||0000-0003-2369-3017
  • Villa Morales, Juan|||0000-0003-1322-1518
  • Medrano Gómez, Álvaro Manuel|||0009-0001-0722-2592
  • Datas Medina, Alejandro|||0000-0001-5964-3818
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Laser textured black alumina for high infrared emissivity

  • Loubet, Nicolas Alexandre|||0009-0005-4197-6995
  • Medrano Gómez, Álvaro Manuel|||0009-0001-0722-2592
  • López Estrada, Esther|||0000-0003-4256-9329
  • Datas Medina, Alejandro|||0000-0001-5964-3818
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Triazine-Carbosilane Dendrimersomes Enhance Cellular Uptake and Phototoxic Activity of Rose Bengal in Basal Cell Skin Carcinoma Cells

  • Sztandera, Krzysztof
  • Gorzkiewicz, Michael
  • Batal, Mateusz
  • Arkhipova, Valeria
  • Knauer, Nadezhda
  • Sánchez-Nieves Fernández, Javier|||0000-0003-0410-2285
  • Mata de la Mata, Francisco Javier de la|||0000-0003-0418-3935
  • Gómez Ramírez, Rafael|||0000-0001-6448-2414
  • Apartsin, Evgeny
  • Klajnert-Maculewicz, Barbara
Background: The search for new formulations for photodynamic therapy is intended to improve the outcome of skin cancer treatment using significantly reduced doses of photosensitizer, thereby avoiding side effects. The incorporation of photosensitizers into nanoassemblies is a versatile way to increase the efficiency and specificity of drug delivery into target cells. Herein, we report the loading of rose bengal into vesicle-like constructs of amphiphilic triazine-carbosilane dendrons (dendrimersomes) as well as biophysical and in vitro characterization of this novel nanosystem. Methods: Using established protocol and analytical and spectroscopy techniques we were able to synthesized dendrons with strictly designed properties. Engaging biophysical methods (hydrodynamic diameter and zeta potential measurements, analysis of spectral properties, transmission electron microscopy) we confirmed assembling of our nanosystem. A set of in vitro techniques was used for determination ROS generation, (ABDA and H2DCFDA probes), cell viability (MTT assay) and cellular uptake (flow cytometry and confocal microscopy). Results: Encapsulation of rose bengal inside dendrimersomes enhances cellular uptake, intracellular ROS production and concequently, the phototoxicity of this photosensitizer. Conclusion: Triazine-carbosilane dendrimersomes show high capacity as drug carriers for anticancer photodynamic therapy, Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), Instituto Ramón y Cajal de Investigación Sanitaria, IRYCIS, Ministerio de Economía, Comercio y Empresa, Comunidad de Madrid, Junta de Comunidades de Castilla-La Mancha