Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Supramolecular interaction of a molecular catalyst with a polymeric carbon nitride photoanode enhances photoelectrochemical activity and stability at neutral pH

  • Mondal, Sanjit
  • Salati, Martina|||0000-0001-5681-7245
  • Nicaso, Marco
  • Albero, Josep|||0000-0002-4841-7206
  • Segado Centellas, Mireia|||0000-0002-1290-6403
  • Volokh, Michael|||0000-0001-8510-9336
  • Bo, Carles|||0000-0001-9581-2922
  • García, Hermenegildo|||0000-0002-9664-493X
  • Gil-Sepulcre, Marcos|||0000-0002-2839-8108
  • Llobet Dalmases, Antoni|||0000-0002-6176-5272
  • Shalom, Menny|||0000-0002-4506-4177
Polymeric carbon nitride (CN) emerged as an alternative, metal-free photoanode material for water-splitting photoelectrochemical cells (PECs). However, the performance of CN photoanodes is limited due to the slow charge separation and water oxidation kinetics due to poor interaction with water oxidation catalysts (WOCs). Moreover, operation under benign, neutral pH conditions is rarely reported. Here, we design a porous CN photoanode connected to a highly active molecular Ru-based WOC, which also acts as an additional photo-absorber. We show that the strong interaction between the π-system of the heptazine units within the CN with the CH groups of the WOC's equatorial ligand enables a strong connection between them and an efficient electronic communication path. The optimized photoanode exhibits a photocurrent density of 180 ± 10 μA cm -2 at 1.23 V vs. the reversible hydrogen electrode (RHE) with 89% faradaic efficiency for oxygen evolution with turnover numbers (TONs) in the range of 3300 and a turnover frequency (TOF) of 0.4 s -1, low onset potential, extended incident photon to current conversion, and good stability up to 5 h. This study may lead to the integration of molecular catalysts and polymeric organic absorbers using supramolecular interactions. Supramolecular interaction of a Ru oligomeric catalyst with polymeric carbon nitride forms CN-Ru hybrid system, achieving high photoelectrochemical water-splitting activity, enhanced stability, and.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of morphology and composition of spherical layered double hydroxide particles and derived mixed oxides on photocatalytic CO 2 reduction

  • Molina-Muriel, Manuel
  • Eledath-Changarath, Mahesh
  • Dhingra, Archit
  • Sánchez-Royo, J. F.
  • Ribera, Antonio
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Considering the flexibility in the synthesis that allows the formation of materials with more than two metals, the present study reports the preparation of trimetallic layered double hydroxides (LDHs) having Al as structural tripositive cation, Ti as photocatalytically active d 0 transition metal and either Ni or Co as dipositive cation. In addition, these LDHs were used as precursors of the corresponding trimetallic mixed oxides (MO). LDH and MO materials in combination with Ru(bpy) 3 Cl 2 as photosensitizer and triethanolamine as sacrificial electron donor were used as catalysts for CO 2 reduction under solar light irradiation. A different product selectivity, either CH 4 for Ni-LDH or CO and H 2 for Co -MO, was observed with production rates for CH 4 or CO that are among the highest reported for these systems. The role of the inorganic materials in the photocatalytic process was supported by transient absorption spectroscopy that revealed the quenching of the Ru(bpy) 3 Cl 2 triplet excited state by Ni-LDH or Co -MO. An important finding was that the trimetallic Co -Ti -Al oxide with cobaltite structure is able to perform CO 2 reduction in spite that the reduction potential of its conduction band is not sufficient to perform the process, evidence by photoluminescence revealing the existence of an upper electronic state responsible for the reduction. These results show the interest in screening multimetallic materials in photocatalysis due to their improved performance and diverse properties., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-0126071-OB-CO21 and PID2021- 125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021-038, CIPROM- 2022-60 and Advanced Materials Program MFA-2022-023 and MFA- 2022-057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. M. M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Self-optimizing metal-free porous reactors with dynamic active sites unlock record oxygen reduction activity

  • Zhang, Lei
  • Xu, Qiaoling
  • Chen, Mengshan
  • Zhang, Yongcai
  • Zhou, Yingtang
  • Hu, Guangzhi
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Efficient metal-free catalysts are crucial for advancing aluminum-air batteries (AABs), yet their development has been hindered by poor electronic structure optimization and sluggish mass transport. In this study, we developed a hierarchically porous N/S co-doped carbon nanoreactor via an etching-doping pyrolysis strategy, achieving an ultrahigh surface area of 2630 m2 g-1 and a well-organized pore network. The resulting catalyst demonstrated outstanding oxygen reduction reaction (ORR) activity, with half-wave potentials of 0.952 V (vs. RHE; RHE stands for reversible hydrogen electrode) in alkaline and 0.754 V (vs. RHE) in acidic media. When assembled into AABs, it delivered a peak power density of 265 mW cm-2 and an energy density of 4152 Wh kg-1, along with excellent cycling stability. Finite element simulations showed that the hierarchical porosity promoted oxygen diffusion and enhanced reaction kinetics. Furthermore, in situ characterization and theoretical calculations revealed that S-C-N configurations dynamically transformed into Opre-S-C-N groups under working conditions, which modulated the electronic structure of adjacent carbon sites, facilitated *O-to-*OH conversion, and reduced energy barriers. This study provided a dynamic site-regulation strategy for improving ORR kinetics in metal-free catalysts and offered a new pathway for designing high-performance energy materials operating under realistic conditions., This work was financially supported by the Outstanding Youth Scientific Research Project for Colleges and Universities of Anhui Province of China (2022AH020054), the Open Research Fund Program of Anhui Province Key Laboratory of Specialty Polymers (Anhui University of Science & Technology, AHKLSP23-06), and the Xinjiang Key Laboratory of Novel Functional Materials Chemistry Open Science Project (XJLNFMC-202406). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union Next Generation EU PRTR-C17.I1) is also gratefully acknowledged. The authors would like to thank the Analytical and Testing Center (Anhui University of Science & Technology) for the XRD, XPS, and TEM analysis. The authors thank Mr Fu from SCI-GO (https://www.sci-go.com) for performing the BET analysis. The authors extend their gratitude to Ms Hao (from Scientific Compass https://www.shiyanjia.com) for providing invaluable assistance with the SEM analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

2D/2D MOF/MXene Schottky Junction: Prolonged Carrier Lifetime and Enhanced Hydrogen Evolution Efficiency

  • Cabrero-Antonino, Maria
  • Uscategui-Linares, Andrés Felipe|||0000-0003-2448-9966
  • Ramírez-Grau, Rubén
  • García-Aznar, Pablo|||0000-0003-0586-0037
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Zhang, Jianjun
  • Yu, Jiaguo
  • Xu, Feiyan
[EN] Harnessing sunlight for photocatalytic overall water splitting offers a sustainable approach to renewable hydrogen (H2) production, addressing global energy and environmental challenges. However, the development of efficient and durable photocatalysts remains a significant obstacle. This study introduces the design and performance of a 2D/2D Schottky heterojunction composed of Cu2[CuTCPP] MOF of nanometric size and exfoliated Ti3C2 MXene for visible-light-driven overall water splitting. By leveraging the extensive interfacial contact between the two components, an interfacial electric field is generated, promoting efficient charge migration and prolonging carrier lifetimes, as confirmed through systematic density functional theory simulations, in situ irradiation X-ray photoelectron spectroscopy, femtosecond transient absorption spectroscopy, and X-ray absorption spectroscopy. Ti3C2 MXene, acting as a cocatalyst for photohole transport and accumulation, reduces oxidative degradation and slows catalyst deactivation. The synergistically enhanced light absorption properties of the Cu2[CuTCPP]/Ti3C2 heterojunction result in an impressive H2 evolution rate exceeding 5000 mu mol gcat(-)1, underscoring its potential for next-generation photocatalytic systems in renewable energy applications., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) and European Commission (ERC Adv. Grant 101141466 DISCOVERY) is gratefully acknowledged. R. R.-G. and J. A. thank the Spanish Ministry of Science and Innovation for a postgraduate scholarship and a Ramon y Cajal research associate contract, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Nanometric Cu-ZnO Particles Supported on N-Doped Graphitic Carbon as Catalysts for the Selective CO2 Hydrogenation to Methanol

  • Peng, Lu
  • Jurca, Bogdan
  • Parvulescu, Vasile I.
  • Dhakshinamoorthy, Amarajothi
  • García-Baldoví, Alberto
  • Tian, Liang|||0000-0002-3801-653X
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Garcia-Baldovi, Hermenegildo
[EN] The quest for efficient catalysts based on abundant elements that can promote the selective CO2 hydrogenation to green methanol still continues. Most of the reported catalysts are based on Cu/ZnO supported in inorganic oxides, with not much progress with respect to the benchmark Cu/ZnO/Al2O3 catalyst. The use of carbon supports for Cu/ZnO particles is much less explored in spite of the favorable strong metal support interaction that these doped carbons can establish. This manuscript reports the preparation of a series of Cu-ZnO@(N)C samples consisting of Cu/ZnO particles embedded within a N-doped graphitic carbon with a wide range of Cu/Zn atomic ratio. The preparation procedure relies on the transformation of chitosan, a biomass waste, into N-doped graphitic carbon by pyrolysis, which establishes a strong interaction with Cu nanoparticles (NPs) formed simultaneously by Cu2+ salt reduction during the graphitization. Zn2+ ions are subsequently added to the Cu-graphene material by impregnation. All the Cu/ZnO@(N)C samples promote methanol formation in the CO2 hydrogenation at temperatures from 200 to 300 degrees C, with the temperature increasing CO2 conversion and decreasing methanol selectivity. The best performing Cu-ZnO@(N)C sample achieves at 300 degrees C a CO2 conversion of 23% and a methanol selectivity of 21% that is among the highest reported, particularly for a carbon-based support. DFT calculations indicate the role of pyridinic N doping atoms stabilizing the Cu/ZnO NPs and supporting the formate pathway as the most likely reaction mechanism., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGeneration EU PRTR-C17.I1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

MXenes as Heterogeneous Thermal Catalysts: Regioselective Anti-Markovnikov Hydroamination of Terminal Alkynes with 10 2 h-1 Turnover Frequencies

  • Ramírez-Grau, Rubén
  • García-Aznar, Pablo|||0000-0003-0586-0037
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Pavel, Octavian
  • Tirsoaga, Alina
  • Cojocaru, Bogdan
  • Popescu, Dana Georgeta
  • Parvulescu, Vasile I.
[EN] Due to their conductive properties and optoelectronic tunability, MXenes have revolutionized the area of electrocatalysis and active materials in supercapacitors. In comparison, there are only a few reports on MXenes as thermal catalysts for general organic reactions. Herein, the unprecedented catalytic activity of Ti3C2 MXene for the hydroamination of alkynes is reported, overcoming the limitations of poor activity, lack of selectivity, and stability, which are generally encountered in the solid catalysts known so far. In the case of Ti3C2, hydroamination exhibits almost complete selectivity for the anti-Markovnikov regioisomer, for both aliphatic amines and less-reactive aromatic amines. Ti3C2 also efficiently catalyzes intramolecular hydroamination, leading to the formation of indol heterocycles. The catalytic hydroamination of C-C multiple bonds is a reaction with complete atom efficiency that may form C-N bonds from convenient reagents. The maximum number of hydroamination sites on the Ti3C2 nanosheets is quantified by thermoprogrammed NH3 desorption. The measured TOF values are on the order of 102 h-1, with the highest TOF value being 350 h-1 for 1-hexyne hydroamination by n -butylamine. Therefore, Ti3C2 is among the few heterogeneous hydroamination catalysts studied, with its activity per site being comparable to the best hydroamination catalysts reported so far. Density functional theory calculations on the models indicate the cooperation of neighboring Ti atoms in the mechanism. Considering the compositional and structural versatility of MXenes, the present findings open the door for further application of MXenes in other general organic reactions., Financial support was provided by UEFISCD, Ministry of Innovation and Science (Severo Ochoa CEX2021-001230-S and PDI2021-0126071-OB-CO2, both funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021-38 and Advanced Materials Programme Graphica MFA/2022/023 with funding from the European Union NextGenerationEU PRTR-C17.I1) are gratefully acknowledged. This study forms part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. We thank CTI-CSIC and ASIC-UPV for their computational facilities. R.R.-G. and P. G.-A. are recipients of postgraduate scholarships awarded by the Spanish Ministry of Science and Innovation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced Green Hydrogen Generation via Photocatalytic Water Splitting Using V-Doped Ti-Squarate MOFs

  • Ferrando-Ferrero, Javier
  • Vos-Gracia, Miriam
  • Santoriello, Giuseppe
  • Voccia, Maria
  • Farnesi Camellone, Matteo
  • Caporaso, Lucia
  • Horcajada, Patricia
  • Carrasco, Sergio
  • Marta
  • Fernandes-de Almeida, Vitor
  • Garcia-Baldovi, Hermenegildo
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] Herein, defect engineering strategies were applied to enhance the photocatalytic activity of squarate-based MOFs (IEF-11) for green hydrogen generation via water splitting. The textural properties of pristine IEF-11(Ti) were significantly improved using microwave (MW)-assisted synthesis, leading to a four-fold increase in surface area (350 m2 g-1) due to the formation of mesopores associated with defect aggregation, primarily arising from linker vacancies (24%). Vanadium doping (0-100%) progressively reduced the optical band gap (2.44-1.87 eV), shifting absorption toward the visible region. The IEF-11 series was evaluated as photocatalysts for the hydrogen evolution reaction under simulated sunlight irradiation, revealing a volcano-type trend correlating activity with V content. Doped with 11% V, the MW-synthesized IEF-11(Ti0.89V0.11)_MW solid exhibited the highest activity (1053 vs. 536 mu mol g-1 h-1 H2 for IEF-11(Ti)), attributed to optimized band alignment, enhanced charge separation, and structural robustness. It also showed activity in photocatalytic overall water splitting (83 mu mol g-1 h-1 H2, 30% higher than the undoped IEF-11(Ti)). Theoretical calculations further confirmed band gap narrowing and the generation of new electronic states upon V-doping, facilitating charge transfer and reducing electron-hole recombination. These findings highlight the relevance of inducing artificial porosity and V-doping of IEF-11(Ti) to prepare efficient MOF-based photocatalysts. Importantly, this work not only reports the first V-squarate frameworks but also represents one of the first systematic studies addressing the effect of metal doping in MOFs for photocatalytic water splitting, achieving competitive efficiencies operating in the absence of cocatalysts., M.V.-G., H.G., S.N., P.H., and S.C. acknowledge HYLIOS project (CPP2022-010052), J.F.-F., S.C., and P.H. acknowledge NAPOLION project (PID2022-139956OB-I00) and HYDRAGON project (PCI2025-163274) and S.N. thanks the support received from Grant PID2024-155324OB-I00, all funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. J.F.-F. acknowledges the PhD grant from the Community of Madrid (PIPF-2023/ECO-29763). M.G.-F. thanks the PhD financial support of PRE2022-101327. V.F. thanks support from Generalitat Valenciana for a Santiago Grisolia (CIGRIS/2021/096) scholarship. H.G.B. thanks the support of grant number RYC2022-037287-I funded by MCIN/AEI/1013039/501100011033. G.S. and L.C. gratefully acknowledge the italian MUR for funding via the PRIN 2022 project "MATISSE" (2022K5SX27). We also thank CINECA for providing computational resources through the ISCRA C projects "SCORPION" and "COSACCO". H.G. thanks financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PDI2021-0126071-OB-CO21) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). We acknowledge the European Synchrotron Radiation Facility (ESRF) for provision of synchrotron radiation facilities and Momentum Transfer for facilitating the diffraction measurements. Jakub Drnec is thanked for assistance and support in using beamline ID31. The measurement setup was developed with funding from the European Union's Horizon 2020 research and innovation program under the STREAMLINE project (grant agreement ID 870313). Measurements performed as part of the MatScatNet project were supported by OSCARS through the European Commission's Horizon Europe Research and Innovation programme under grant agreement No. 101129751.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Supramolecular interaction of a molecular catalyst with a polymeric carbon nitride photoanode enhances photoelectrochemical activity and stability at neutral pH

  • Mondal, Sanjit
  • Salati, Martina
  • Nicaso, Marco
  • Segado-Centellas, Mireia
  • Michael Volokh
  • Bo, Carles
  • Gil-Sepulcre, Marcos
  • Llobet, Antoni
  • Menny, Shalom
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Polymeric carbon nitride (CN) emerged as an alternative, metal-free photoanode material for water-splitting photoelectrochemical cells (PECs). However, the performance of CN photoanodes is limited due to the slow charge separation and water oxidation kinetics due to poor interaction with water oxidation catalysts (WOCs). Moreover, operation under benign, neutral pH conditions is rarely reported. Here, we design a porous CN photoanode connected to a highly active molecular Ru-based WOC, which also acts as an additional photo-absorber. We show that the strong interaction between the pi-system of the heptazine units within the CN with the CH groups of the WOC's equatorial ligand enables a strong connection between them and an efficient electronic communication path. The optimized photoanode exhibits a photocurrent density of 180 +/- 10 mu A cm(-2) at 1.23 V vs. the reversible hydrogen electrode (RHE) with 89% faradaic efficiency for oxygen evolution with turnover numbers (TONs) in the range of 3300 and a turnover frequency (TOF) of 0.4 s(-1), low onset potential, extended incident photon to current conversion, and good stability up to 5 h. This study may lead to the integration of molecular catalysts and polymeric organic absorbers using supramolecular interactions., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 849068). This work was also partially supported by the Israel Science Foundation (ISF), Grant No. 601/21. MS and MN acknowledge the Ministerio de Ciencia e Innovacion (MICINN) for the grants PRE2020-093789 and PRE2020-093521, respectively. CB gratefully acknowledges MCINN/AEI/10.13039/501100011033 for projects PID2020-112806RB-I00 and CEX2019-000925-S, the ICIQ Foundation and the CERCA program of the Generalitat de Catalunya for funding. HG thanks MICINN (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union Next Generation EU PRTR-C17.I1). JA thanks the MICINN for a Ramon y Cajal research associate contract (RYC2021-031006-I funded by MCIN/AEI/10.13039/501100011033 and by "European Union Next Generation EU/PRTR), and acknowledges the financial support (PID2022-141099OA-I00 funded by MCINN/AEI/10.13039/501100011033 and by "European Union Next Generation EU/PRTR). AL acknowledges MICINN through the project PID2022-140143OB-I00, Generalitat de Catalunya for the project 2017 SGR 1631 and Severo Ochoa (CEX2019-000925-S).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Solving the Conundrum of the Influence of Irradiation Power on Photothermal CO&lt, sub&gt, 2&lt, /sub&gt, Hydrogenation

  • Szalad, Horatiu
  • Peng, Yong
  • Gosch, Jonas Werner
  • Baldi, Andrea
  • Askes, Sven H. C.
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Solar photocatalysis appears as a viable approach for the production of value-added chemicals from CO2. However, up to now, there is no information on the influence of the light intensity on the product distribution of CO2 hydrogenation and the modeling of the actual local temperature at the catalytic sites for typical nanoparticulate photocatalysts. Herein, it is shown that for a photothermal catalyst containing a high density of homogeneously distributed Ru nanoparticles, the collective heating prevails, resulting in a homogeneous temperature distribution in the material that should be relatively close to that of the support and that can be measured macroscopically. Moreover, light intensity has a clear influence on product distribution due to the differences in the local temperature, and therefore, attention should be paid to stable operating conditions, temperature, and CO2 conversion that can result in remarkable differences in product selectivity for the same catalyst as a function of light intensity., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB- CO21 funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union Next GenerationEU PRTR-C17.I1), and European Comission (Flow Photo Chem; Grant Agreement 86253) are gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation by a Ramon y Cajal research associate contract (RYC2021-031006-I funded by MCIN/AEI/10.13039/501100011033 and by "European Union Next Generation EU/PRTR), and the financial support (PID2022-141099OA-I00 funded by MCIN/AEI/10.13039/501100011033 and by "European Union Next Generation EU/PRTR). S.H.C. Askes gratefully acknowledges the Dutch Research Council (NWO) for the NWO-XS grant (OCENW.XS21.4.167). A.B. gratefully acknowledges the Dutch Research Council (NWO) for the Vidi 680-47-550 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Probing Defects in Covalent Organic Frameworks

  • Daliran, Saba
  • Reza Oveisi, Ali
  • Dhakshinamoorthy, Amarajothi
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Defects in covalent organic frameworks (COFs) play a pivotal role in determining their properties and performance, significantly influencing interactions with adsorbates, guest molecules, and substrates as well as affecting charge carrier dynamics and light absorption characteristics. The present review focuses on the diverse array of techniques employed for characterizing and quantifying defects in COFs, addressing a critical need in the field of materials science. As will be discussed in this review, there are basically two types of defects referring either to missing organic moieties leaving free binding groups in the material or structural imperfections resulting in lower crystallinity, grain boundary defects, and incomplete stacking. The review summarizes an in-depth analysis of state-of-the-art characterization techniques, elucidating their specific strengths and limitations for each defect type. Key techniques examined in this review include powder X-ray diffraction (PXRD), infrared spectroscopy (IR), thermogravimetric analysis (TGA), nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), scanning transmission electron microscopy (STEM), scanning tunneling microscope (STM), high resolution transmission electron microcoe (HRTEM), gas adsorption, acid-base titration, advanced electron microscopy methods, and computational calculations. We critically assess the capability of each technique to provide qualitative and quantitative information about COF defects, offering insights into their complementary nature and potential for synergistic use. The last section summarizes the main concepts of the review and provides perspectives for future development to overcome the existing challenges., A.R.O. extend his acknowledgment to the University of Zabol (grant number: IR-UOZ-GR-9381) and Iran National Science Foundation (INSF) for providing funding under grant number 4025637. S.D. also thanks the support from the Lorestan University (LU). A.D. is beneficiary of a grant Mariia Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Novel Ti12-Based Metal-Organic Framework for Photocatalytic Hydrogen Evolution

  • Chen, Bingbing
  • Mansouri, Asma
  • Dovgaliuk, Iurii
  • Boullay, Philipe
  • Xiao, Beibei
  • Fan, Dong
  • Arabindani, Lokuge
  • Patriarche, Gilles
  • Cornu, Ieuan
  • Florian, Pierre
  • Maurin, Guillaume
  • Rueda-Navarro, Celia Maria|||0000-0002-9569-7722
  • Melillo, Arianna
  • Ramirez-Hernandez, Juan Jose
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Garcia-Baldovi, Hermenegildo
[EN] A new microporous titanium-based metal-organic framework (Ti-MOF), labeled as MIP-209(Ti) (MIP: Materials from Institute of Porous Materials of Paris), features nitro terephthalate ligands and Ti12O15 oxo-clusters, as revealed by continuous rotation electron diffraction (cRED). MIP-209(Ti) can be obtained using two different terephthalate (1, 4-BDC2¿) derivatives such as NO2-BDC and 2Cl-BDC in an eco-friendly solvent, suggesting the isostructural versatility of Ti12-MOFs. Alternatively, its Ti-oxo-cluster can be tuned, similarly to MIP-177(Ti)-LT bearing the same Ti12O15 sub-unit. Typically, low percentage Cr3+ doping (¿5 at%) in MIP-209(Ti) favorably enhances the water stability. MIP-209(Ti-Cr)-NO2 shows a significant hydrogen production rate, with good reusability and stability under simulated solar light irradiation. Compared to the benchmark Ti-MOF IEF-11, the hydrogen production of MIP-209(Ti-Cr)-NO2 with 5 at% Cr doping has a fourfold enhancement in photocatalytic hydrogen evolution from water splitting reaction (HER) during 5 h in presence of methanol (5 812 µmol/gcat against 1 391 µmol/gcat), as well as, without any noble metal co-catalyst, a sixfold enhancement in overall water splitting reaction (OWS) (681 and 325 µmol/gcat of H2 and O2, respectively, against 94 and 53 µmol/gcat of H2 and O2, respectively). This work represents a leap forward in the synthesis of Ti-MOFs and their practical photocatalytic applications., The authors acknowledge the European Union under the Grant Agreement 101084131 (MOF2H2 project) for the financial support, and the CNRS-CEA "METSA" French network (FR CNRS 3507) on the platform IRMA (CRISMAT-Caen) for the support in cRED data collection and analysis. The CRISTAL beamline staff members from Soleil synchrotron are acknowledged for the high-energy PXRD data. A.M. is thankful for the financial support by the Spanish Government and Generalitat Valenciana (CIAPOS/2022/071). H.G. is thankful for the financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MICIU/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). S.N. is thankful for the support of grant PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. The computational work was performed using HPC resources from GENCI-CINES (Grant A0160907613).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Metal-free carbon dot-microporous graphitic carbon heterojunctions as photocatalysts for CO&lt, sub&gt, 2&lt, /sub&gt, reduction

  • Garcia-Mulero, Ana
  • Primo, Ana
  • Cabrero-Antonino, Maria
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] A series of photocatalysts containing various loadings of carbon dots (CD) on microporous graphitic carbons (mpC) was prepared by pyrolysis at 900 degrees C under inert atmosphere of alpha-cyclodextrin containing preformed CDs. CDs were obtained by microwave hydrothermal conversion of citric acid and urea, and they were purified by centrifugation and partition between aqueous and organic solvents. The CD/mpC composites exhibit the expected morphology for mpC in TEM with particles of about 20 nm and microporous channels of 0.6 nm. XRD and Raman spectra of CD/mpC were also coincident with those of pristine mpC, but XPS and elemental analysis detected the presence of pyridinic N from the CDs. The optimal CD/mpC sample exhibits higher photocatalytic activity for the simultaneous H-2 evolution and CO2 reduction to CH4 than the independent components or than a mechanical CD and mpC mixture reaching a productivity rate of 29 and 5 mu mol g(catalyst)(-1) h(-1) for H-2 and CH4, respectively. CD/mpC photocatalysts were stable for four consecutive runs., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials program Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Natural Sunlight-Driven Photocatalytic Overall Water Splitting with 5.5% Quantum Yield Promoted by Porphyrin-Sensitized Zn Poly(heptazine imide)

  • Szalad, Horatiu
  • García-Muelas, Rodrigo
  • Galushchinski, Alexey
  • Savateev, Oleksandr
  • Antonietti, Markus
  • Uscategui-Linares, Andrés Felipe|||0000-0003-2448-9966
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Meso-tetrakis(4-carboxyphenyl)porphyrin (H4TCPP) has been loaded on a partially exchanged Zn2+ poly(heptazine imide) (PHI), changing the light harvesting properties of the system, without altering the PHI structure. At the optimal loading (20 wt %), the photosensitized (Zn/K)-PHI is able to produce 1.06 mmolH2/g and 0.46 mmolO2/g after 12 h of reaction irradiation of Milli-Q water under visible light by a 100 mW/cm2 white LED. The apparent quantum yield for the overall water splitting reaction was 5.5% at 400 nm and 2% at 700 nm. Outdoor water splitting irradiation with natural sunlight shows the feasibility of the process. The photocatalytic performance of TCPP20%@(Zn/K)-PHI is considerably higher than that of analyzed reference samples such as graphitic carbon nitride, poly(triazine imide), and potassium PHI with H4TCPP photosensitization. These relative photocatalytic activities point out the relevance of the PHI structure and the presence of Zn2+. It is proposed that Zn2+ simultaneously binds PHI and H4TCPP. Transient absorption spectroscopy supports the occurrence of photoinduced electron transfer in which electrons are located at the H4TCPP and holes at the PHI moiety. Transient photocurrent measurements show a higher charge separation efficiency on TCPP20%@-(Zn/K)-PHI compared to (Zn/K)-PHI, and measurement of the frontier orbitals indicates an adequate energy alignment of the HOMO/LUMO levels of TCPP4- with respect to (Zn/K)-PHI. The results show the possibility of developing efficient noble metal-free photocatalytic systems based on PHI dye sensitization., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials program Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) is acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR) and for the financial support (PID2022-141099OA-I00 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR). R.G.M. gratefully acknowledges the generous high-performance computing time provided by CETA-CIEMAT in their Turgalium cluster. H.S. thanks the European ITN Solar2Chem for a postgraduate fellowship. The authors gratefully acknowledge The Max Planck Society for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Catalytic applications of bimetallic molybdenum nitrides in biomass conversion: Recent advances, challenges and opportunities

  • Yang, Huiru
  • Zhou, Linyuan
  • Hu, Changwei
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The current energy crisis, along with massive atmospheric CO2 emissions caused by fossil fuel combustion, motivates researchers to search for renewable alternative energy sources with minimal climate impact. Biomass emerges as a promising low-carbon feedstock for biofuel and chemical production, though its efficient conversion requires advanced catalytic systems with high efficiency and stability. Molybdenum nitride-based catalysts, particularly bimetallic variants, have shown exceptional promise in this regard. This study performed a PRISMA systematic review of recent advances in molybdenum nitrides catalysts for biomass conversion, covering the synthetic strategies for tailoring structural and electronic properties through phase control, morphology engineering, metal atom embedding and heteroatom doping etc. The structure-activity relationships in the selective cleavage of C-C/C-O bond with diverse active sites and emerging applications of molybdenum nitrides as catalytic supports are also proposed. This review critically analyzes the unique performance of molybdenum nitrides in biomass conversion for producing bio-fuel and chemicals. Key research frontiers such as active site characterization, catalyst reconstruction mechanisms, regeneration protocols, in situ spectroscopy, and machine learning-assisted design etc. are also proposed to promote the future design and development of multi-metallic molybdenum nitride. The systematic insights provided aim to guide future development of multi-metallic molybdenum nitride catalysts for sustainable biorefining., This work was financially supported by the National Natural Science Foundation of China (No. 21536007) , the 111 Project (B17030) , the Agricultural Science and Technology Innovation Project of Chinese Academy of Agricultural Sciences (CAAS-ASTIP-2021-BIOMA-JCKJ2025001, CAAS-ASTIP-ZDRW202510) . Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Interfacial electron flow in a Fe2P@NPC(core)/NiCo LDH(shell) heterostructure enables site-specific electronic-state modulation for bifunctional oxygen electrocatalysis

  • Xu, Qiaoling
  • Zhang, Lei
  • Liu, Changlang
  • Zhao, Xue
  • Zhang, Yongcai
  • Zhou, Yingtang
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Efficient bifunctional electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are vital for next-generation rechargeable Zn-air batteries (ZABs). Yet, achieving robust interfacial coupling and precise electronic state matching between ORR and OER sites remains challenging. Here, we devised a proof-ofconcept strategy based on a multiple-bridged interface that induced directed electron flow between ORR-active Fe2P@N/P-doped carbon (NPC) and OER-active NiCo-layered double hydroxides (LDH). This configuration bridged Fe2P to the NPC substrate via Fe-N bonds and formed a semi-coherent interface with LDH, resulting in a bifunctional catalyst with an exceptionally low Delta E of 0.581 V. When integrated into ZABs, the catalyst delivered a peak power density of 220 mW/cm2, a specific capacity of 792 mAh/gZn, and decent cycling stability. In-situ measurements and theoretical analyses revealed charge transfer from LDH through Fe2P to NPC across the interface, enabling site-specific electronic-state modulation. This generated an electron-deficient LDH favorable for OER while optimizing the electronic state of Fe2P for enhanced ORR activity. This facilitated rapid *O to *OOH conversion at LDH sites during OER and promoted *OH desorption at Fe2P sites during ORR. Therefore, our work shows that adequate interfacial charge transfer enables site-specific electronic state control for synergistic oxygen electrocatalysis., This work was financially supported by the Outstanding Youth Scientific Research Project for Colleges and Universities of Anhui Province of China (2022AH020054), the Open Research Fund Program of Anhui Province Key Laboratory of Specialty Polymers (Anhui University of Science & Technology, AHKLSP23-06), and the Xinjiang Key Laboratory of Novel Functional Materials Chemistry Open Science Project (XJLNFMC-202406). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union Next Generation EU PRTR-C17.I1) is also gratefully acknowledged. The authors would like to thank the Analytical and Testing Center (Anhui University of Science & Technology) for the XRD, XPS, and TEM analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Biopolymer-derived structured graphitic carbons as metal-free heterogeneous ozonation catalysts in water

  • López-Francés, Antón|||0000-0002-1639-592X
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Peng, Lu
  • Bernat-Quesada, Francisco
  • Ferrer, Belén
  • Navalón, Sergio
[EN] The development of metal-free heterogeneous catalysts for advanced oxidation processes is an important area of research, advancing in sustainability, with potential practical applications in water treatment. In this work, we report the development of defective structured graphitic carbons synthesized from biomass including alginate or chitosan polysaccharides and used as metal-free ozonation catalysts in water. These solids were characterized by several techniques, including powder X-ray diffraction, several spectroscopies (i.e. X-ray photoelectron, Raman or Fourier Transform infrared), elemental combustion analyses, thermogravimetric measurements, and electron microscopic techniques. The catalytic performance of graphitic carbon was examined in the ozonation reaction and the graphitic carbon derived from alginate (G) was found to be the most active catalyst by showing complete degradation in less than 4 h under the operational conditions as oxalic acid (50 mg L -1 ), catalyst (100 mg L -1 ), 20 degrees C, O 3 dosage (140 mg h -1 ) at pH 3. Importantly, this solid retains its activity mostly upon reuse for more than 20 h, an observation that compares favorably with previous reports using graphene-based materials. In addition, activity of partially deactivated catalyst can be recovered by a pyrolysis process associated to the reconstitution of graphitic active sites of the catalyst. Experimental evidence by electron spin resonance together with specific (photo)catalytic experiments is provided to support the role of 1 O 2 as key intermediate during the oxalic acid degradation in water in the presence of G. This study exemplifies the activity of active graphitic-based solids from biomass precursors as ozonation heterogeneous catalysts in water in the absence of any metal., S.N. thanks the support received from Grant PID2021-123856OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU) . H.G. thanks the financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MICIU/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17. I1) . Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Metal organic framework composites for reduction of CO2

  • Liu, Kuan-Guan
  • Bigdeli, Fahime
  • Panjeh, Akram
  • Larimi, Afsanehsadat
  • Morsali, Ali
  • Dhakshinamoorthy, Amarajothi
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Global warming due to greenhouse gases is a major current environmental threat. In today's world those applicable technologies which convert CO2 into valuable and environmentally friendly fuels and chemicals are of great importance. Thanks to functional sites or guests embedded in the structure, metal organic frameworks (MOFs) show a superb potential for such a conversion that is even further enhanced in MOF composites. The present review discusses the use of MOF composites, with an emphasis on their constituent components, as catalysts for CO2 reduction, converting it into various value-added and environmentally friendly chemicals such as saturated and unsaturated hydrocarbons, carboxylic acids and carboxylates, and carbon monoxide. The present review covers four major approaches for CO2 reduction, including electroreduction, photoreduction, photoelectroreduction, and hydrogenation. All reports on the design and development of appropriate MOF composites to be used in the above-mentioned CO2 reductions have been considered. Finally, the future outlook on the use of MOF composites in CO2 reduction is provided, giving some ideas for further design highly efficient MOF composites capable of converting CO2 to value-added products., The authors gratefully acknowledge from Tarbiat Modares University and the support received from the Niroo Research Institute (NRI) under the contract number 99/50420/152. This work was supported by the National Natural Science Foundation of China (Grant No. 92161106), the Natural Science Foundation of Ningxia (Grant No. 2022AAC05017), and the Foundation of State Key Laboratory of Physical Chemistry of Solid Surfaces (Grant No. 202013). Financial support by the Spanish Ministry of Science and Innovation (PDI-2021-0126071-OB-CO21) and Generalitat Valenciana (Prometeo 2021-038) is gratefully acknowledged. This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (Graphica MFA/2022/023. The Institute is a Center of Excellence Severo Ochoa (CEX-2021-001230-S) . A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bio-Inspired Hierarchical Nanoreactor With Hetero-Coordinated Fe-P-Co Bridges for Whole-Pathway-Regulated Electrocatalytic Oxygen Reduction

  • Xu, Qiaoling
  • Zhang, Lei
  • Li, Xiayu
  • Xu, Weihang
  • Ren, Linyi
  • Xu, Mai
  • Zhou, Yingtang
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Efficient oxygen reduction reaction (ORR) requires coordination of oxygen adsorption, transport, and catalysis at active sites. Yet most studies address only one step, overlooking whole-pathway O2 regulation and thus limiting performance. Here, we report a bioinspired Co-doped Fe2P on N-doped carbon featuring a hierarchical eucalyptus-like nanoarchitecture, engineered to regulate oxygen throughout the electrochemical cycle, where Fe-P-Co hetero-coordinated bridges anchored to the carbon substrate through Fe & horbar;N bonds induce strong electronic coupling and polarization. The hierarchical structure generated local electric fields that enriched OH- and O2, while multilevel porosity accelerated oxygen transport. This enabled coordinated optimization of oxygen adsorption, transfer, and active-site electronic configuration. This nanohybrid achieved a half-wave potential of 0.938 V vs. RHE, sustained discharge in Al-air batteries for 373 h, and delivered an energy density of 3487 Wh/kg. Theoretical simulations revealed that Co-doping shortened Fe & horbar;P bonds and tuned the Fe electronic environment, lowering the d-band center and weakening Fe 3d-O 2p interactions, which reduced the *OH desorption barrier and accelerated ORR kinetics. In situ Raman spectroscopy revealed that Fe-P-Co bridges served as active centers facilitating *OH release during ORR. These findings indicate that integrating hierarchical architecture, hetero-coordinated Fe-P-Co bridges, and electronic-state modulation enables whole-pathway O2 management for efficient oxygen electrocatalysis., This work was financially supported by the Outstanding Youth Scientific Research Project for Colleges and Universities of Anhui Province of China (2022AH020054), the Scientific Research Foundation of Anhui University of Science and Technology (2025yjrc0135), the Open Research Fund Program of Anhui Province Key Laboratory of Specialty Polymers (Anhui University of Science & Technology, AHKLSP23-06), Zhejiang Province key research and development project (2023C01191) and the Xinjiang Key Laboratory of Novel Functional Materials Chemistry Open Science Project (XJLNFMC-202406). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union Next Generation EU PRTR-C17.I1) is also gratefully acknowledged. The authors would like to thank the Analytical and Testing Center (Anhui University of Science & Technology) for the XRD, XPS, and TEM analysis. The authors thank Mr. Fu from SCI-GO (www.sci-go.com) for performing the BET analysis. The authors extend their gratitude to Ms. Hao (from Scientific Compass www.shiyanjia.com) for providing invaluable assistance with the SEM analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Visible Light-Driven Synthesis of a Bioinspired Porphyrin-Based Polymer-Coated MOF for Efficient and Selective Photocatalytic Oxidation of Vanillyl Alcohol to Vanillin

  • Oveisi, Ali Reza
  • Heydarani, Safiyeh
  • Daliran, Saba
  • Sanchooli, Esmael
  • Khajeh, Mostafa
  • Molinet-Chinaglia, Clément Dominique
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The development of metal-organic framework (MOF)-polymer composites presents a promising avenue for designing advanced functional materials, yet preserving MOF porosity and stability after modification remains challenging. Here, the study synthesizes a MOF from cost-effective precursors under mild conditions and functionalizes it in situ covalent porphyrinic polymer layer via visible-light irradiation, eliminating the need for additional reagents. The resulting composite, CPhP@UiO-66(Ce)-NH2, is extensively characterized using FT-IR, XRD, SEM/EDX, HRTEM, BET, XPS, UV-vis DRS, EPR, transient absorption spectroscopy, and solid-state 13C NMR spectroscopy. Under low-energy LED light, the composite efficiently generates reactive oxygen species (ROS), enabling the additive-free aerobic oxidation of vanillyl alcohol (a lignin model monomer) to vanillin with high selectivity and conversion, outperforming both the parent MOF and reported systems. This work introduces a novel, biomimetic strategy for constructing macrocycle-inspired MOF-polymer hybrids, demonstrated for the first time in selective photocatalytic aerobic oxidation. The findings advance the design of MOF-based materials for sustainable catalysis and green chemistry applications., Financial support was provided by UEFISCD, Ministry of Innovation and Science (Severo Ochoa CEX2021-001230-S and PDI2021-0126071-OB-CO2, both funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021-38 and Advanced Materials Programme Graphica MFA/2022/023 with funding from the European Union NextGenerationEU PRTR-C17.I1) are gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation by the financial support (PID2022-141099OA-I00 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR). The authors gratefully acknowledge financial support from Lorestan University (Khorramabad, Iran). This research was additionally supported by the University of Zabol (grants UOZ-GR-9381, UOZ-GR-8175, and UOZ-GR-4188) and the Iran National Science Foundation (INSF project No. 4037983).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

LDH-derived CoTiAl mixed oxide as catalyst for photo-assisted CO2 hydrogenation

  • Molina-Muriel, Manuel
  • Peng, Yong
  • Szalad, Horatiu
  • ANTONIO RIBERA
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] A layered double hydroxide (LDH) has been used as precursor for the synthesis of a multimetallic mixed oxide with photocatalytic activity. Thus, a trimetallic CoTiAl LDH has been synthesized as spherical aggregates of nanosheets. Analysis at short synthesis times indicates that CoTiAl-LDH particles grow perpendicular to initially formed oligomeric Ti-lactate nuclei. Calcination of CoTiAl-LDH at 400 degrees C affords the corresponding CoTiAl mixed oxide (MO) with low crystallinity having a cobaltite structure, while also maintaining the morphology. This CoTiAl-MO exhibits at 200 degrees C photocatalytic activity for CO2 hydrogenation to CO, accompanied with lesser amounts of CH4, with remarkable apparent quantum yields at 365 nm of 7.0 and 4.6 for CO and CH4, respectively and very low apparent activation energy for 10 kJ/mol. The present results show a promising direction to exploit the potential that the preparation of multimetallic LDH offers for the synthesis of mixed oxides with optimal compositions for an even more enhanced photocatalytic activity., Financial support by the Spanish Ministry of Science, Innovation and Universities (CEX-2021-001230-S, PID2021-0126071-OB-CO21 and PID2021-125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021-038, CIPROM-2022-60 and Advanced Materials Program MFA- 2022-023 and MFA-2022-057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. M. M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship. H. S. thanks the EU -funded Solar2Chem ITN project for a contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fe and Sn Single-Site-Based Electrodes for High-Current CO2. Reduction in Acid Media and Stable Zn-CO2 Batteries

  • Hu, Jiajun
  • Simonelli, Laura
  • Lopez-Salas, Nieves
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Albero-Sancho, Josep|||0000-0002-4841-7206
[EN] Electrocatalytic CO2 conversion is a promising method for reducing the dependence on fossil fuels and lowering CO2 emissions. However, challenges such as suppression of the competing hydrogen evolution reaction (HER) and long-term stability, especially in acidic media, among others, hinder its industrial application. Herein, Fe and Sn single sites supported on an N-doped carbon support (FSNC) was prepared by direct pyrolysis of selected precursors. XANES and EXAFS measurements confirmed the presence of Fe and Sn single atoms coordinated to N or O atoms in the N-doped carbon. An analogous material synthesized by deposition of Fe and Sn precursors on a previously fabricated N-doped carbon matrix (FS/NC), followed by thermal reduction, rendered Fe-O small clusters and Sn single atoms. FSNC was tested for CO2 reduction, obtaining a CO Faradaic efficiency (FE) of 92%, while the CO FE of FS/NC was 63%. We attributed the differences in selectivity to the interaction between the Fe and Sn single sites, while the Fe-O clusters are inactive for this reaction. Double-layer capacitance (CDL) and electrochemical impedance spectroscopy (EIS) measurements confirmed a larger electrochemically active surface area and lower charge-transfer resistance, respectively, in FSNC. In addition, FSNC demonstrated a high CO FE (90%) under acidic conditions (pH = 2.1), demonstrating that this electrocatalyst can effectively suppress the HER under acidic conditions. Moreover, 5 cm2 electrodes containing FSNC were fabricated, and their stability was tested for 20 h of continuous operation in an electrochemical flow cell at different current densities (50-350 mA/cm2), demonstrating improved stability at high current densities and under acidic conditions. Finally, FSCN-based cathodes were also tested in a Zn-CO2 battery, achieving a maximum power density of 2.54 mW/cm2 at 0.48 V with a current density of 5.2 mA/cm2 and demonstrating outstanding rechargeability and stability upon 50 continuous charge-discharge cycles for 50 h., Financial support was provided by the Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S, financed by MCIN/AEI/10.13039/501100011033, and PDI2021-0126071-OB-CO21 and PID2022-141099OA-I00, funded by MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR) and Generalitat Valenciana (Prometeo 2021-083, CIGE 2022-093, and Advanced Materials programme Graphica MFA/2022/023, financed by NextGenerationEU through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital). J.A. also thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I, funded by MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR). J.H. thanks the Chinese Scholarship Council for a postgraduate scholarship to perform his PhD at Valencia. S.G.-F. thanks the European Union's Horizon 2020 research and innovation program (Marie Sklodowska-Curie grant agreement No. 894270).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A photodetector based on the non-centrosymmetric 2D pseudo-binary chalcogenide MnIn2Se4

  • Serra, Marco
  • Antonatos, Nikolas
  • Lajaunie, Luc
  • Weng, Mouyi
  • Bastonero, Lorenzo
  • Sarkar, Kalyan Jyoti
  • Gusmao, Rui
  • Luxa, Jan
  • Bartoszewicz, Rafal
  • Ziembicki, Jakub
  • Plutnarová, Iva
  • Marzari, Nicola
  • Kudrawiec, Robert
  • Sofer, Zdenek
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Due to their attractive band gap properties and van der Waals structure, 2D binary chalcogenide materials have been widely investigated in the last decade, finding applications in several fields such as catalysis, spintronics, and optoelectronics. Ternary 2D chalcogenide materials are a subject of growing interest in materials science due to their superior chemical tunability which endows tailored properties to the devices prepared thereof. In the family of AIIBIII2XVI4, ordered ZnIn2S4-like based photocatalytic systems have been studied meticulously. In contrast, reports on disordered phases appear to a minor extent. Herein, a photoelectrochemical (PEC) detector based on the pseudo-binary MnIn2Se4 system is presented. A combination of optical measurements and DFT calculations confirmed that the nature of the bandgap in MnIn2Se4 is indirect. Its performance outclasses that of parent compounds, reaching responsivity values of 8.41 mA W-1. The role of the non-centrosymmetric crystal structure is briefly discussed as a possible cause of improved charge separation of the photogenerated charge carriers., Z. S. was supported by the ERC-CZ program (project LL2101) from the Ministry of Education Youth and Sports (MEYS). We acknowledge funding from the European Union through the 2D-PRINTABLE project (GA-101135196). This work was supported by the project "The Energy Conversion and Storage" funded as project no. CZ.02.01.01/00/22_008/0004617 by Programme Johannes Amos Commenius, call Excellent Research. N. A. acknowledges funding from the National Science Centre (NCN) Poland SONATA 19 Grant no. 2023/51/D/ST11/02588 and at Wroclaw University of Science and Technology, and this work was supported by the National Science Centre (NCN) Poland OPUS 23 no. 2022/45/B/ST7/02750. Calculations have been carried out using resources provided by Wroclaw Centre for Networking and Supercomputing. L. L. acknowledges funding from the Spanish Ministerio de Economia y Competitividad, the Ministerio de Ciencia e Innovacion MCIN/AEI/10.13039/501100011033/FEDER UE, and the European Union "NextGenerationEU"/PRTR (PID2022-140370NB-I00, RYC2021-033764-I, CPP2021-008986). The (S)TEM measurements were performed at the National Facility ELECMI ICTS ("Division de Microscopia Electronica", Universidad de Cadiz, DME-UCA). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR). L. B. and N. M. gratefully acknowledge support from the Deutsche Forschungsgemeinschaft (DFG) under Germany's Excellence Strategy (EXC 2077, no. 390741603, University Allowance, University of Bremen) and Lucio Colombi Ciacchi, the host of the "U Bremen ExcellenceChair Program". N. M. acknowledges support by the NCCR MARVEL, a National Centre of Competence in Research, funded by the Swiss National Science Foundation (grant number 205602). K. J. S. was supported by the Johannes Amos Comenius Programme, European Structural and Investment Funds, project CHEMFELLS VI (no. CZ.02.01.01/00/22_010/0008122).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Visible-Light-Driven Photocatalytic Hydrogen Production from Polystyrene Nanoplastics Using Pd/TiO2 Nanoparticles

  • Severino, Angela
  • Lavorato, Cristina
  • Argurio, Pietro
  • Molinari, Raffaele
  • Grirrane, Abdessamad|||0000-0001-5388-3554
  • Cabrero-Antonino, Maria
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The accumulation of microplastics and nanoplastics in aquatic environments has raised significant concerns in recent years, given the potential health risks to both aquatic ecosystems and humans; due to their nanometer size, they enter the food chain of aquatic species and consequently that of humans too. This study presents an efficient plasmonic photocatalyst for degrading polystyrene nanoplastics (PS NPs), while simultaneously generating green hydrogen in the process. Blank controls show that the presence of PS NPs is necessary for H2 evolution, since under identical conditions, it does not occur in their absence. A series of visible light-responsive plasmonic photocatalysts consisting of TiO2 nanoparticles (NPs) supporting Pd, Au, Pt, and Ag NPs were prepared via the impregnation method. Among the synthesized nanoparticle photocatalysts, the 3 wt % Pd/TiO2 NP photocatalyst exhibited superior hydrogen generation, producing 1329.76 mu molH2 gcat -1 after 2 h of irradiation, while also achieving a reduction in the average PS NP diameter. This study illustrates the potential of solar NP photocatalysis for environmental remediation and simultaneous hydrogen evolution., The Spanish authors gratefully acknowledge the Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023) with funding from European Union NextGenerationEU PRTR-C17.I1. The Italian authors gratefully acknowledge the financial support by the project "Tech4You-Technologies for Climate Change Adaptation and Quality of Life Improvement"-National Recovery and Resilience Plan (NRRP), Mission 4, Component 2, Investment 1.5, funded from the European Union-NextGeneration EU, Identity code: ECS 00000009, CUP B83C22003980006; CUP H23C22000370006. A.S. also thanks this project for funding her doctorate fellowship and her research period at the Institute of Chemical Technology in Valencia. C.L. thanks this project for funding her Research Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Unraveling the Influence of Shell Thickness in Organic Functionalized Cu2O Nanoparticles on C2+ Products Distribution in Electrocatalytic CO2 Reduction

  • Hu, Jiajun
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Cu-based electrocatalysts exhibit enormous potential for electrochemical CO2 conversion to added-value products. However, high selectivity, specially toward C2+ products, remains a critical challenge for its implementation in commercial applications. Herein, the study reports the preparation of a series of electrocatalysts based on octadecyl amine (ODA) coated Cu2O nanoparticles (NPs). HRTEM images show ODA coatings with thickness from 1.2 to 4 nm. DFT calculations predict that at low surface coverage, ODA tends to lay on the Cu2O surface, leaving hydrophilic regions. Oppositely, at high surface coverage, the ODA molecules are densely packed, being detrimental for both mass and charge transfer. These changes in ODA molecular arrangement explain differences in product selectivity. In situ Raman spectroscopy has revealed that the optimum ODA thickness contributes to the stabilization of key intermediates in the formation of C2+ products, especially ethanol. Electrochemical impedance spectroscopy and pulse voltammetry measurements confirm that the thicker ODA shells increase charge transfer resistance, while the lowest ODA content promotes faster intermediate desorption rates. At the optimum thickness, the intermediates desorption rates are the slowest, in agreement with the maximum concentration of intermediates observed by in situ Raman spectroscopy, thereby resulting in a Faradaic efficiency to ethanol and ethylene over 73%., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). Participation in the EU project ECO2Fuel is gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramony Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR), and Generalitat Valenciana (CIGE 2022-093) financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital. J.H. thanks the Chinese Scholarship Council for doctoral fellowship. S.O. acknowledges the National Science Centre, Poland (grant no. UMO/2020/39/I/ST4/01446) and the "Excellence Initiative - Research University" (IDUB) Program, Action I.3.3 - "Establishment of the Institute for Advanced Studies (IAS)" for funding (grant no. UW/IDUB/2020/25). The computation was carried out with the support of the Interdisciplinary Center for Mathematical and Computational Modeling at the University of Warsaw (ICM UW) under grants no. G83-28 and GB80-24.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced Fatty Acid Photodecarboxylation over Bimetallic Au-Pd Core-Shell Nanoparticles Deposited on TiO2

  • Yang, Huiru
  • Tian, Liang
  • Grirrane, Abdessamad
  • García-Baldoví, Alberto
  • Hu, Jiajun
  • Sastre, Germán
  • Hu, Changwei
  • García Gómez, Hermenegildo
Photodecarboxylation of biomass-derived fatty acids to alkanes offers significant potential to obtain hydrocarbons and economic benefits due to the mild conditions and high activity. Herein, the photodecarboxylation of hexanoic acid into alkanes using TiO-supported monometallic Au or Pd and bimetallic Au-Pd catalysts is reported. It was found that bimetallic Au-Pd catalysts, featuring a core-shell structure evidenced by EDX-mapping and element line profile, show better photocatalytic performance, achieving 94.7% conversion of hexanoic acid and nearly 100% selectivity to pentane under UV-vis irradiation in the absence of H than the monometallic Au analogue. This remarkable enhancement in activity compared to its TiO supported monometallic Au or Pd analogues can be attributed to the synergistic effect between Au and Pd within the nanostructured Au(core)-Pd(shell) alloy for achieving more efficient charge-separation efficiency upon visible light excitation. This photocatalyst exhibits a wide scope converting multiple fatty acids into hydrocarbons. Moreover, it can even photocatalyze the conversion of raw bio-oils into alkanes directly. No obvious activity loss was observed during the reusability tests, demonstrating the good stability of the present catalyst. Density functional theory (DFT) calculations indicate that oxidation of carboxylates on TiO leads to alkyl radicals that become bound to metal nanoparticles. The superior catalytic performance of Au(core)-Pd(shell)/TiO is derived from the weaker adsorption for H on the alloy and the lower hydrogen evolution reaction overpotential. Our research can result in an efficient bio-oil upgrading, resulting in the synthesis of biofuels from biomass under mild conditions., This work was financially supported by the National Natural Science Foundation of China (No. 21536007) and the 111 Project (B17030). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) is gratefully acknowledged. Huiru Yang also acknowledges the support from China Scholarship Council (CSC)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX-2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Defects and Disorder in Covalent Organic Frameworks for Advanced Applications

  • Daliran, Saba
  • Blanco, Matías
  • Dhakshinamoorthy, Amarajothi
  • Reza Oveisi, Ali
  • Alemán, José
  • García Gómez, Hermenegildo
Crystalline porous organic polymers (CPPs) or covalent organic frameworks (COFs), are composed by light elements linked by covalent bonds. Despite the remarkable progress attained, there are still bottlenecks limiting further development, some of them related to the presence of defects during their synthesis as well as in-depth understanding of structure of active centers and/or details of the reaction mechanism. Indeed, very often the proposed structures are far from reality because defects and disorders have not been considered. The present review provides an illustrative overview of “defects and disorder in COFs”. These defects include those not only generated during the synthesis and manipulation of COFs, but also lack of crystallinity, stacking disorder and network vacancies. The review starts giving general remarks on organic COFs and their synthetic methods, followed by different methods to play and manage defects, how to minimize them or how to take advantage of them to gain new properties and applications. Selected characterization techniques to quantify defective structures and active sites in COFs are also presented. Finally, the challenges and future opportunities in the field have been summarized in the last section., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). The University of Zabol is acknowledged for financial support (Grant numbers: IR-UOZ-GR-9381). A.D. is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). Authors also thank the Lorestan University for the grant support. Financial support was provided by the Spanish Government (PID2021-122299NB-I00, TED2021-130470B-I00, TED2021-129999B-C32), “Comunidad de Madrid”, European Structural Funds (S2018/NMT-4367), proyectos sinérgicos I+D (Y2020/NMT6469) and Comunidad Autónoma de Madrid (SI1/PJI/2019–00237)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX-2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydrogenation of amides to amines by heterogeneous catalysis: a review

  • Yang, Huiru
  • García Gómez, Hermenegildo
  • Hu, Changwei
Amines are pivotal building blocks for a range of applications, including pharmaceuticals, polymers, agrochemicals, and organic synthesis. The hydrogenation of amides using molecular hydrogen via heterogeneous catalysis is considered a promising method for producing amines with considerably high atom efficiency, environmental friendliness, and eonomic viability. Continued developments have occurred in this area, with milestones reached in the hydrogenation of various amides to amines via heterogeneous catalysis. At present, no systematic analysis of the influence of amide structures on their reactivity and the required type of catalyst has been reported. This review describes the most recent advances in catalytic amide hydrogenation, paying special attention to the influence of structural features (cyclic amides and aliphatic acyclic amides) on catalyst performance. Structural features endow amides with specific reactivities, reflected in considerable differences in the ease of hydrogenation and diverse product selectivity. In addition, insights into the conversion of polyamides, fatty acids, and triglycerides to amines are provided. This review provides new perspectives for designing and applying heterogeneous catalysts adapted to specific conditions and amide structures., This work was financially supported by the National Natural Science Foundation of China (No. 21536007) and the 111 Project (B17030). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) is gratefully acknowledged. Huiru Yang also acknowledges the support from the China Scholarship Council (CSC No. 202206240141)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX-2021-001230-S)., Peer reviewed