Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mixed Fe-Mo carbide prepared by a sonochemical synthesis as highly efficient nitrate reduction electrocatalyst

  • Hu, Jiajun
  • Osella, Silvio
  • Arizono dos Reis, Eduardo
  • Brunca da Silva, Anelisse
  • Ribeiro, Caue
  • Helena Mascaro, Lucia
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Ammonia, a versatile compound that can be used as a fertilizer, chemical or fuel, has since long been produced through the energy-intensive Haber-Bosch process. Recently, the electrochemical nitrate reduction reaction (NO3RR) using electricity generated from renewable sources has attracted widespread attention. However, the complex reaction pathway of NO3RR leads to the formation of many undesirable by-products. Herein we successfully prepared a mixed (FeMo)2C catalyst with good electrocatalytic NO3RR, having a NH3 yield of 14.66¿mg¿h-1 cm-2 and an FE of 94.35% at low potential -0.3¿V vs RHE. DFT calculations show that the presence of Fe in Mo2C lattice changes the reaction mechanism, decreasing the potential barrier to be overcome from 1.36 to 0.89¿eV. In addition, mixed Fe-Mo carbide facilitates the adsorption of intermediates and promotes NH3 desorption, facilitating NO3¿ reduction to NH3. In addition, (FeMo)2C was used as cathode for Zn-NO3 battery to generate electricity, producing ammonia at the same time, with a power density of 3.8 mWcm-2 and an NH3 FE of 88%. This work describes a new synthesis method for mixed metal carbides and provides a promising strategy for NH3 production., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). J.H. thanks the Chinese Scholarship Council for a postgraduate scholarship to perform his PhD at Valencia. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021 031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR), and Generalitat Valenciana financial support (CIGE 2022-093) financed by European Union-Next Generation EU, through the Conselleria de Innovacion, ¿ Universidades, Ciencia y Sociedad Digital. S.O. thanks the National Science Centre, Poland (grant no. UMO/2020/39/I/ST4/01446) and the Excellence Initiative Research University (IDUB) Program, Action I.3.3 Establishment of the Institute for Advanced Studies (IAS) for funding (grant no. UW/IDUB/2020/25). The computation was carried out with the support of the Interdisciplinary Center for Mathematical and Computational Modeling at the University of Warsaw (ICM UW) under grants no. G83-28 and GB80-24.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Green, HF-Free Synthesis of MXene Quantum Dots and their Photocatalytic Activity for Hydrogen Evolution

  • Ramírez-Grau, Rubén
  • Melillo, Arianna
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Osella, Silvio
  • Asiri, Abdullah M.
[EN] A general methodology to prepare MXene quantum dots (MxQDs) with yields over 20% by liquid-phase laser ablation of the MAX phase is reported. Mechanical and thermal shock by 532 nm laser pulses (7 ns fwhp, 50 mJ x pulse(-1), 1 Hz pulse frequency) produces MAX etching and exfoliation to form MXene QDs, avoiding the use of HF. The process can be followed by absorption and emission spectroscopy and by dynamic laser scattering and it appears to be general, being applied to Ti3AlC2, Ti2AlC, Nb2AlC, and V2AlC MAX phases. Density functional theory calculations indicate that, depending on the surface terminal groups, the diminution of the MXene size to the nanometric scale makes it possible to control the band gap of the MXene. The photocatalytic activity of these MXene QDs for hydrogen evolution has been observed, reaching an H-2 production for the most efficient Ti3C2 QDs as high as 2.02 mmol x g(-1) x h(-1)., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-001230S and PDI2021-126971-CO2-OB-1 both funded by the MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021-038) is gratefully acknowledged. R.R.G. and A.M. also thank, respectively, the Spanish Ministry of Science and Innovation and the Generalitat Valenciana for postgraduate scholarships. S.O. thanks the "Excellence Initiative - Research University" (IDUB) Program, Action I.3.3 - "Establishment of the Institute for Advanced Studies (IAS)" for funding (grant no. UW/IDUB/2020/25) and the Polish National Agency for Academic Exchange under the Bekker program (grant no. PPN/BEK/2020/1/00053/U/00001). This research was carried out with the support of the Interdisciplinary Center for Mathematical and Computational Modeling at the University of Warsaw (ICM UW) under grant nos. G83-28 and GB80-24.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Unraveling the Influence of Shell Thickness in Organic Functionalized Cu2O Nanoparticles on C2+ Products Distribution in Electrocatalytic CO2 Reduction

  • Hu, Jiajun
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Cu-based electrocatalysts exhibit enormous potential for electrochemical CO2 conversion to added-value products. However, high selectivity, specially toward C2+ products, remains a critical challenge for its implementation in commercial applications. Herein, the study reports the preparation of a series of electrocatalysts based on octadecyl amine (ODA) coated Cu2O nanoparticles (NPs). HRTEM images show ODA coatings with thickness from 1.2 to 4 nm. DFT calculations predict that at low surface coverage, ODA tends to lay on the Cu2O surface, leaving hydrophilic regions. Oppositely, at high surface coverage, the ODA molecules are densely packed, being detrimental for both mass and charge transfer. These changes in ODA molecular arrangement explain differences in product selectivity. In situ Raman spectroscopy has revealed that the optimum ODA thickness contributes to the stabilization of key intermediates in the formation of C2+ products, especially ethanol. Electrochemical impedance spectroscopy and pulse voltammetry measurements confirm that the thicker ODA shells increase charge transfer resistance, while the lowest ODA content promotes faster intermediate desorption rates. At the optimum thickness, the intermediates desorption rates are the slowest, in agreement with the maximum concentration of intermediates observed by in situ Raman spectroscopy, thereby resulting in a Faradaic efficiency to ethanol and ethylene over 73%., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). Participation in the EU project ECO2Fuel is gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramony Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR), and Generalitat Valenciana (CIGE 2022-093) financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital. J.H. thanks the Chinese Scholarship Council for doctoral fellowship. S.O. acknowledges the National Science Centre, Poland (grant no. UMO/2020/39/I/ST4/01446) and the "Excellence Initiative - Research University" (IDUB) Program, Action I.3.3 - "Establishment of the Institute for Advanced Studies (IAS)" for funding (grant no. UW/IDUB/2020/25). The computation was carried out with the support of the Interdisciplinary Center for Mathematical and Computational Modeling at the University of Warsaw (ICM UW) under grants no. G83-28 and GB80-24.