Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Methodology for comparative assessment of battery technologies: experimental design, modeling, performance indicators and validation with four technologies

  • Irujo Izcue, Elisa
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
An increasing number of applications with diverse requirements incorporate various battery technologies. Selecting the most suitable battery technology becomes a tedious task as several aspects need to be taken into account. Two of the key aspects are the battery characteristics under temperature variations and their degradation. While numerous contributions using tailored assessment methods to evaluate both aspects for a particular application exist in the literature, a general methodology for analysis is necessary to enable a quantitative comparison between different technologies. We propose in this paper a novel methodology, based on performance indicators, to quantify the potential and limitations of a battery technology for diverse applications sharing a similar operational profile. A quantification of phenomena such as the influence of high and low temperatures on the battery, or the effect of cycling and state of charge on battery aging is obtained. In pursuit of these indicators, an experimental procedure and the fitting of aging model parameters that allow their calculation are proposed. As an additional outcome of this work, a general aging model that allows comprehensive analysis of aging behavior is developed and the trade-off between experimental time and accuracy is analyzed to find an optimal experimental time between 2 and 4 months, depending on the studied battery technology. Finally, the proposed methodology is applied to four battery technologies in order to show its potential in a real case-study., This work was supported by grants PID2022-139914OB-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by ERDF/EU (European Union), TED2021-132457B-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by the NextGenerationEU/PRTR (European Union), HYBPLANT (0011-1411-2022-000039) funded by the Government of Navarre (Spain), and Lion2H2 (PJUPNA2023-11380) funded by the Public University of Navarre (Spain). Elisa Irujo was supported by a predoctoral contract from the Public University of Navarre (Spain).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

In-depth characterization and equivalent-circuit representation of lithium-ion batteries for on-line diagnosis: cell-level proposal and battery-level validation

  • Soto Cabria, Adrián
  • Berrueta Irigoyen, Alberto
  • Ruiz de Galarreta Gómez, Olatz
  • Bruch, Maximilian
  • Kevlishvili, Nina
  • Lux, Stephan
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Lithium-ion batteries are key components for electric mobility and renewable energy systems. Their effective use in such applications requires precise tools for real-time diagnosis and refined energy management techniques. While battery characterization and modeling are closely related, they are often tackled in isolation due to the challenge of developing models that encapsulate complex physicochemical processes. In response, this paper presents a new approach for an on-line, non-invasive characterization technique of the battery impedance based on power steps, which are a typical process in regular battery operation. The proposed impedance representation is linked to the underlying physicochemical phenomena that drive the operation of a battery, which offers a real-time diagnosis tool to infer insights into underlying phenomena such as lithium anode depletion and phase transitions within both electrodes. This characterization proves instrumental in identifying the key parameters for an equivalent-circuit model. The proposed methodology is proven to be resilient and accurate, given the comprehensive dataset of 1600 experiments used to fit the impedance parameters. Finally, we scale up the cell-level model to represent a commercial 38.4 kWh battery pack. The results prove the robustness of the model, providing a normalized root mean squared error lower than 0.5% across all steady-state and dynamic validations. In essence, this paper proposes a methodology that combines real-time access to underlying battery dynamics with accurate performance simulation., This work was supported by grants PID2022-139914OB-I00 funded by MICIU/AEI/10.13039/501100011033 (Spain) and by ERDF/EU (European Union), TED2021-132457B-I00 funded by MICIU/AEI/ 10.13039/501100011033 (Spain) and by the NextGenerationEU/PRTR (European Union). Parts of this work have been also funded by the "EnStadt: Pfaff" project (grant no. 03SBE112D) and by the EMILAS project (grant no. 03ETE024E) of the German Federal Ministry for Economic Affairs and Climate Action (BMWK). Olatz Ruiz de Galarreta was supported by a predoctoral contract from the Public University of Navarre (Spain).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

In depth battery aging analysis: a key to sustainable energy storage in microgrids

  • Nováková, Katerina
  • Berrueta Irigoyen, Alberto
  • Droese, Dominik
  • Knap, Vaclav
  • Kowal, Julia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The increasing use of renewable energy makes balancing generation and demand in power systems more challenging. This has led to a growing focus on battery technologies and energy storage solutions. These systems are essential for the effective integration of renewable energy into sustainable power networks. However, most experimental studies of lithium-ion batteries are limited to deep charge and discharge cycles, which do not fully represent how batteries operate in stationary applications. In these applications, batteries experience not only the main charge and discharge processes but also additional stress from current fluctuations due to the variable nature of renewable energy. These smaller cycles, known as micro-cycles, have a depth of discharge of less than 2% and occur alongside the primary charge and discharge processes. This paper presents the results of an experimental study focused on battery aging, considering micro-cycles that emulate real-world conditions for batteries in microgrid storage systems. It demonstrates that the degradation in storage systems occurs differently when compared to deep charge and discharge cycles. It provides a detailed analysis of the degradation processes occurring in microgrid batteries using EIS diagnostics and post-mortem analysis and demonstrates the applicability of the findings for renewable energy systems., This work was supported in part by the Grant Agency of Czech Technical University in Prague under Grant SGS24/136/OHK3/3T/13; in part by the project ‘‘The Energy Conversion and Storage’’ through the Programme Johannes Amos Comenius, call Excellent Research under Project CZ.02.01.01/00/22_008/0004617; in part by the MCIN/AEI/10.13039/501100011033/FEDER under Project PID2022-139914OB-I00; in part by the MCIN/AEI/10.13039/501100011033 under Project UE,TED2021-132457B-I00; and in part by European Union Next Generation EU/PRTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Determining the optimal size of energy storage systems for wind farm ramp-rate control

  • Parra Laita, Íñigo de la
  • Marcos Álvarez, Javier
  • Pascual Miqueleiz, Julio María
  • García Solano, Miguel
  • Marroyo Palomo, Luis
Short-term power fluctuations from grid-connected wind farms pose challenges to grid reliability and stability, particularly in terms of ramp-rate compliance. To address these issues, new regulations require integrating energy storage systems with renewable generators. This paper presents a method for determining the optimal power and energy capacity of storage systems specifically designed to ensure wind farm compliance with ramp-rate constraints. The proposed approach is validated using three strategies originally developed for photovoltaic applications, demonstrating their effectiveness when adapted to wind energy. Validation is based on high-resolution real-world data recorded at 1-second intervals and averaged over 5 s, covering one year at a wind farm in northern Spain with five 3 MW wind turbines. Additionally, the annual cycling degradation of the storage system is analyzed. The effectiveness of the ramp-rate control strategies is further validated through experimental testing on a real system comprising two lithium-ion batteries: a 1 MW/0.39 MWh power battery with a fast response and a 0.7 MW/0.7 MWh energy battery with a slower response but greater autonomy. These batteries are connected to a 3 MW wind turbine, where a commercially available power converter is adapted for use as a battery charger., This work has been supported by the Spanish State Research Agency (AEI) and ERDF-EU under grants PID2019-110816RB-C21 , TED2021-132457B-I00 and PID2022-142179OB-I00 .
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

On the characterization of lithium-ion batteries under overtemperature and overcharge conditions: identification of abuse areas and experimental validation

  • Lalinde Sainz, Iñaki
  • Berrueta Irigoyen, Alberto
  • Arza, Joseba
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Although lithium-ion batteries have gained considerable popularity in renewable energy and electric vehicle applications, their safety still remains a concern under certain voltage, temperature, or state of charge conditions. This can lead to degradation and potential thermal runaway. In order to improve the safety assessment of LIBs based on their operating conditions, it is therefore essential to analyze not only their safe operating area but also their abuse region. This study focuses on the characterization of the abuse region of lithium-ion batteries by proposing a new methodology in which four areas of abuse are identified and experimentally validated using a commercial 3.6 Ah pouch cell. The cell is subjected to overtemperature and overcharge conditions, exploring various states of charge (0 to 200%) and ambient temperatures (25 to 100 °C). The influence of temperature and state of charge on the battery's behavior is thoroughly analyzed to fully characterize the abuse region. Results reveal the limiting temperatures and states of charge that define the boundaries of the abuse areas. By extending the characterization of LIBs behavior beyond the safe operation area with the determination of four areas of abuse, this article contributes to a better understanding of the phenomena and abuse mechanisms produced by overtemperature and overcharge events with an eye to improving battery safety., This work is part of the projects PID2019-111262RB-I00, funded by MCIN/AEI/10.13039/501100011033/, TED2021-132457B-I00, funded by MCIN/AEI/10.13039/501100011033/ and by the European Union “NextGenerationEU/PRTR”, STARDUST, funded by European Union’s Horizon 2020 research and innovation program, HYBPLANT, Spain (0011-1411-2022-000039), funded by Government of Navarre, Spain, and a Ph.D. scholarship (PRE2020-095314), funded by Spanish Ministry of Science and Innovation. Open access funding provided by Universidad Pública de Navarra, Spain.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A novel aging modeling approach for second-life lithium-ion batteries

  • Pérez Ibarrola, Ane
  • San Martín Biurrun, Idoia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The electric mobility industry is booming. In order to reduce the environmental impact of this boom, there is the potential to reuse the batteries from electric vehicles. However, the technical and economic feasibility of the second-life of lithium-ion batteries remains in question. This is due to the intricate non-linear mechanisms that occur during battery degradation, leading to capacity and power loss. Ongoing research aims to create models that can predict the state of battery degradation. However, most studies have focused on the battery's first life, operating within a limited state of health range and requiring constant monitoring of the battery's exposure conditions. While these models provide satisfactory results for the battery's performance in vehicles, they cannot be directly applied to second-life scenarios. In response to this issue, this article proposes a degradation modeling method for second-life batteries based on identifying and linearizing different degradation trends within the battery. This approach allows the application of the model without prior knowledge of the battery's history. It has been validated for a state of health range of 95% to 20%, through both conventional charge-discharge tests and a real-world scenario involving a smart charging station for urban buses. The results obtained with the developed model are overall satisfactory, achieving a MAPE below 3% for capacity and 1.4% for internal resistance in the real-world scenario., This work was supported by grants PID2022-139914OB-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by ERDF/EU (European Union), TED2021-132457B-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by the NextGenerationEU/PRTR (European Union), HYBPLANT (0011-1411-2022-000039) and PRIDEBAT (PC24-PRIDEBAT-014-002) funded by the Departamento de Universidad, Innovación y Transformación Digital (Department of University, Innovation and Digital Transformation) of the Goverment of Navarre (Spain), and Lion2H2 (PJUPNA2023-11380) funded by the Public University of Navarre (Spain).