Skip to main content

FACTOR HUMANO E INCERTIDUMBRE SOBRE LA SECUENCIACION Y EL EQUILIBRADO EN LINEAS DE MODELOS MIXTOS

TIN2014-57497-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Mixed integer linear programming models for minimizing ergonomic risk dispersion in an assembly line at the Nissan Barcelona factory

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Alfaro Pozo, Rocío|||0000-0001-8214-1875
We present a variant of the approach to the assembly line balancing problems, with the aim of reducing the ergonomic risk for operators of mixed-model assembly lines (MILP-3). Specifically, the MILP-3 model is focused on minimizing the average range between ergonomic risk values of workstations. Using a case study from Nissan’s plant in Barcelona, not only are the differences between levels of ergonomic risk of stations reduced, but we attempt to reduce the average maximum ergonomic risk of the assembly line. The new model is compared with two others, MILP-1 and MILP-2, which minimize the average maximum ergonomic risk and the average absolute deviation of the risks, respectively.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Maximizing comfort in Assembly Lines with temporal, spatial and ergonomic attributes

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Alfaro Pozo, Rocío|||0000-0001-8214-1875
  • Batalla García, Cristina
We aim at maximizing the comfort of operators in mixed-model assembly lines. To achieve this goal, we evaluate two assembly line balancing models: the first that minimizes the maximum ergonomic risk and the second one that minimizes the average absolute deviations of ergonomic risk. Through a case study we compare the results of the two models by two different resolution procedures: the Mixed Integer Linear Programming (MILP) and Greedy Randomized Adaptive Search Procedures (GRASP). Although linear programming offers best solution, the results given by GRASPs are competitive., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Modelos y métricas para la versión robusta del Car Sequencing Problem con Flotas de vehículos especiales

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
Partiendo del Car Sequencing Problem (CSP), introducimos el concepto de demanda parcial incierta, incorporando Flotas de vehículos especiales en un plan de demanda. Tras establecer las hipótesis de trabajo con Flotas, proponemos un modelo de programación lineal entera mixta (r-CSP) para satisfacer el máximo número de restricciones del CSP. Posteriormente, definimos multi-secuencia de producción y algunas métricas para evaluar su robustez. El r-CSP considera diversos escenarios de demanda y funciones para medir el requerimiento excesivo de opciones en programas de producción. Dichas funciones son válidas como objetivo en problemas de optimización y como métricas de robustez de multi-secuencias de producción.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A generalisation of Sylvester's problem to higher dimensions

  • Ball, Simeon Michael|||0000-0003-4845-2084
  • Monserrat, Joaquim
In this article we consider $S$ to be a set of points in $d$-space with the property that any $d$ points of $S$ span a hyperplane and not all the points of $S$ are contained in a hyperplane. The aim of this article is to introduce the function $e_d(n)$, which denotes the minimal number of hyperplanes meeting $S$ in precisely $d$ points, minimising over all such sets of points $S$ with $|S|=n$.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A case study at the Nissan Barcelona factory to minimize the ergonomic risk and its standard deviation in a mixed-model assembly line

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Alfaro Pozo, Rocío|||0000-0001-8214-1875
This work examines a balancing problem wherein the objective is to minimize both the ergonomic risk dispersion between the set of workstations of a mixed-model assembly line and the risk level of the workstation with the greatest ergonomic factor. A greedy randomized adaptive search procedure (GRASP) procedure is proposed to achieve these two objectives simultaneously. This new procedure is compared against two mixed integer linear programs: the MILP-1 model that minimizes the maximum ergonomic risk of the assembly line and the MILP-2 model that minimizes the average deviation from ergonomic risks of the set of workstations on the line. The results from the case study based on the automotive sector indicate that the proposed GRASP procedure is a very competitive and promising tool for further research., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

An expert system to minimize operational costs in mixed-model sequencing problems with activity factor

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Alfaro Pozo, Rocío|||0000-0001-8214-1875
One of the major issues in industrial environments is currently maximizing productivity while reducing manufacturing cost. This can be seen clearly reflected in mixed-model assembly lines based systems, where obtaining efficient manufacturing sequences is a key to be competitive in a dynamic and globalized market. However, this continuous cost reduction and productivity growth should not penalize the welfare of employees. This work is intended to address this lack of compatibility between the economic and social objectives through the study of the mixed-model sequencing problem from both the business and labor perspective. This is done by considering the possibility of reducing or increasing processing times of operations by varying the work pace of line's operators within the permissible legal boundaries. Thus, depending on this flexible activation time of operators, the amount of completed work and idle time will be one or the other and, consequently, the productivity of the line will also improve or get worse. In this regard, we propose new approach to the sequencing problem without incurring cost increases and providing a safe working environment, in accordance with applicable law. This new approach leads to obtain efficient manufacturing sequences, in terms of both productivity and labor conditions. Specifically, the objective of the new problem is minimizing the unproductive costs of the line by incorporating the possibility of increasing production through the variation of the work pace of line's operators. Increasing the work pace of operators, the amount of non-completed work or the preventable idle time can be reduced and therefore, their associated costs too. In addition, and without losing sight of the effort involved in working with a work pace above the normal, we propose several economic criteria to compensate the activation of workers where necessary, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Modelos y métricas para la versión robusta del Car Sequencing Problem con flotas de vehículos especiales

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
Partiendo del Car Sequencing Problem (CSP), introducimos el concepto de demanda parcial incierta, incorporando Flotas de vehículos especiales en un plan de demanda. Tras establecer las hipótesis de trabajo con Flotas, proponemos un modelo de programación lineal entera mixta (r-CSP) para satisfacer el máximo número de restricciones del CSP. Posteriormente, definimos multi-secuencia de producción y algunas métricas para evaluar su robustez. El r-CSP considera diversos escenarios de demanda y funciones para medir el requerimiento excesivo de opciones en programas de producción. Dichas funciones son válidas como objetivo en problemas de optimización y como métricas de robustez de multi-secuencias de producción.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Consideration of human resources in the Mixed-model Sequencing Problem with Work Overload Minimization: Legal provisions and productivity improvement

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Alfaro Pozo, Rocío|||0000-0001-8214-1875
  • Batalla García, Cristina
Beginning with a variation of the sequencing problem in a mixed-products line (MMSP-W: Mixed-Model Sequencing Problem with Workload Minimization), we propose two new models that incorporate a set of working conditions in regard with human resources of workstations on the line. These conditions come from collective agreements and therefore must be respected by both company and labor unions. The first model takes into account the saturation limit of the workstations, and the second model also includes the activation of the operators throughout the working day. Two computational experiments were carried out using a case study of the Nissan motor plant in Barcelona with two main objectives: (1) to study the repercussions of the saturation limit on the decrease in productivity on the line and (2) to evaluate the recovery of productivity on the line via both activation of operators, while maintaining the same quality in working conditions achieved by limiting the saturation, and auxiliary processors. By results we state that saturation limitation leads an important increase of work overload, which means average economic losses of 28,731.8 Euros/day. However, the productivity reduction may be counteracted by the work pace factor increase, at certain moments of workday, and/or by the incorporation of auxiliary processors into the line.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Models for assembly line balancing by temporal, spatial and ergonomic risk attributes

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Batalla García, Cristina
  • Alfaro Pozo, Rocío|||0000-0001-8214-1875
Assembly lines with mixed products present ergonomic risks that can affect productivity of workers and lines. Because of that, the line balancing must consider the risk of injury in regard with the set of tasks necessary to process a product unit, in addition to other managerial and technological attributes such as the workload or the space. Therefore, in this paper we propose a new approach to solve the assembly line balancing problem considering temporal, spatial and ergonomic attributes at once. We formulate several mathematical models and we analyze the behavior of one of these models through case study linked to Nissan. Furthermore, we study the effect of the demand plan variations and ergonomic risk on the line balancing result, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Free and regular mixed-model sequences by a linear program-assisted hybrid algorithm GRASP-LP

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Alfaro Pozo, Rocío|||0000-0001-8214-1875
A linear program-assisted hybrid algorithm (GRASP-LP) is presented to solve a mixed-model sequencing problem in an assembly line. The issue of the problem is to obtain manufacturing sequences of product models with the minimum work overload, allowing the free interruption of operations at workstations and preserving the production mix. The implemented GRASP-LP is compared with other procedures through a case study linked with the Nissan’ Engine Plant from Barcelona., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

GRASP for sequencing mixed models in an assembly line with work overload, useless time and production regularity

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Benefits of robust multiobjective optimization for flexible automotive assembly line balancing

  • Chica Serrano, Manuel|||0000-0002-4717-1056
  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • de Armas, Jesica
“This is a pre-print of an article published inJ. Flex Serv Manuf. The final authenticated version is available online at: https://doi.org/10.1007/s10696-018-9309-y ” Chica, M., Bautista, J. & de Armas, J. Flex Serv Manuf J (2018). https://doi.org/10.1007/s10696-018-9309-y, Changing conditions and variations in the demand are frequent in real industrial environments. Decision makers have to take into account this uncertainty and manage it properly. One clear example is the automotive industry where manufacturers have to assume an uncertain and heterogeneous demand. For instance, automotive manufacturers must adapt their decisions when balancing the assembly line by considering different flexible solutions. Our proposal is using robust multiobjective optimization and simulation techniques to provide managers with a set of robust and equally-preferred solutions for assembly line balancing. We study a Nissan case where the demand of each product family is uncertain. The problem is addressed by considering a robust multiobjective model for assembly line balancing based on a high number of production plans. After the selection of six different assembly line configurations, we study the implications of robustness metrics based on workstations’ overload. We show that the adverse managerial effects of not having flexible line configuration when demand changes are alleviated. For the real Nissan automotive case, our analysis and conclusions show the managerial and industrial benefits of using robust assembly lines. We also encourage decision makers to use robust multiobjective optimization methods for selecting the most flexible decisions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Free and regular mixed-model sequences by a linear program-assisted hybrid algorithm GRASP-LP

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Alfaro Pozo, Rocío|||0000-0001-8214-1875
A linear program-assisted hybrid algorithm (GRASP-LP) is presented to solve a mixed-model sequencing problem in an assembly line. The issue of the problem is to obtain manufacturing sequences of product models with the minimum work overload, allowing the free interruption of operations at workstations and preserving the production mix. The implemented GRASP-LP is compared with other procedures through a case study linked with the Nissan’ Engine Plant from Barcelona., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Mixed integer linear programming models for Flow Shop Scheduling with a demand plan of job types

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Alfaro Pozo, Rocío|||0000-0001-8214-1875
This is a post-peer-review, pre-copyedit version of an article published in Central european journal of operations research. The final authenticated version is available online at: http://www.doi.org/10.1007/s10100-018-0553-8, This paper presents two mixed integer linear programming (MILP) models that extend two basic Flow Shop Scheduling problems: Fm/prmu/Cmax and Fm/block/Cmax. This extension incorporates the concept of an overall demand plan for types of jobs or products. After using an example to illustrate the new problems under study, we evaluated the new models and analyzed their behaviors when applied to instances found in the literature and industrial instances of a case study from Nissan’s plant in Barcelona. CPLEX solver was used as a solution tool and obtained acceptable results, allowing us to conclude that MILP can be used as a method for solving Flow Shop Scheduling problems with an overall demand plan., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A hybrid dynamic programming for solving a mixed-model sequencing problem with production mix restriction and free interruptions

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Cano Pérez, Alberto
  • Alfaro Pozo, Rocío|||0000-0001-8214-1875
In this article, we propose a hybrid procedure based on bounded dynamic programming assisted by linear programming to solve the mixed-model sequencing problem with workload minimization with serial workstations, free interruption of the operations and with production mix restrictions. We performed a computational experiment with 23 instances related to a case study of the Nissan powertrain plant located in Barcelona. The results of our proposal are compared with those obtained by mixed integer linear programming., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Improving “just-in-time, just-in-sequence” delivery in first-tier suppliers

  • Bautista Valhondo, Joaquín|||0000-0002-2214-4991
  • Fortuny Santos, Jordi|||0000-0001-8106-3385
This paper presents an action-research project aiming at improving the performance of “just-in-time, just-in-sequence” auto parts manufacturing and delivery in three tier-1 suppliers of the Nissan plant in Barcelona. This research was conducted at the Barcelona School of Engineering (ETSEIB) and promoted by the Nissan factory in Barcelona. In this paper, first, the concept of synchronous manufacturing is explored. After several improvement ideas are spotted within the Nissan plant, the paper focuses on the suppliers. An intervention approach is proposed. Suppliers are categorized and selected suppliers are analyzed (by means of three case studies, each one corresponding to a different type of supplier). This research contributes to understanding how synchronous manufacturing and delivery can be extended to suppliers and the existing drawbacks. The critical variables in synchronous manufacturing , delivery and the relations between them are identified in a conceptual model termed the M-S Model. Implications for suppliers are derived, allowing us to improve the performance of the whole synchronous manufacturing system. A piece of software is developed to help companies schedule a smooth flow of components, making synchronous manufacturing easier. Results may help decision makers develop a supply management system, including policies, procedures and the necessary resource deployment.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Free and regular mixed-model sequences by a linear program-assisted hybrid algorithm GRASP-LP

  • Bautista Valhondo, Joaquín
  • Alfaro Pozo, Rocío
A linear program-assisted hybrid algorithm (GRASP-LP) is presented to solve a mixed-model sequencing problem in an assembly line. The issue of the problem is to obtain manufacturing sequences of product models with the minimum work overload, allowing the free interruption of operations at workstations and preserving the production mix. The implemented GRASP-LP is compared with other procedures through a case study linked with the Nissan’ Engine Plant from Barcelona., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A generalisation of Sylvester's problem to higher dimensions

  • Ball, Simeon Michael
  • Monserrat, Joaquim
In this article we consider $S$ to be a set of points in $d$-space with the property that any $d$ points of $S$ span a hyperplane and not all the points of $S$ are contained in a hyperplane. The aim of this article is to introduce the function $e_d(n)$, which denotes the minimal number of hyperplanes meeting $S$ in precisely $d$ points, minimising over all such sets of points $S$ with $|S|=n$., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Mixed integer linear programming models for Flow Shop Scheduling with a demand plan of job types

  • Bautista Valhondo, Joaquín
  • Alfaro Pozo, Rocío
This is a post-peer-review, pre-copyedit version of an article published in Central european journal of operations research. The final authenticated version is available online at: http://www.doi.org/10.1007/s10100-018-0553-8, This paper presents two mixed integer linear programming (MILP) models that extend two basic Flow Shop Scheduling problems: Fm/prmu/Cmax and Fm/block/Cmax. This extension incorporates the concept of an overall demand plan for types of jobs or products. After using an example to illustrate the new problems under study, we evaluated the new models and analyzed their behaviors when applied to instances found in the literature and industrial instances of a case study from Nissan’s plant in Barcelona. CPLEX solver was used as a solution tool and obtained acceptable results, allowing us to conclude that MILP can be used as a method for solving Flow Shop Scheduling problems with an overall demand plan., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Improving “just-in-time, just-in-sequence” delivery in first-tier suppliers

  • Bautista Valhondo, Joaquín
  • Fortuny Santos, Jordi
This paper presents an action-research project aiming at improving the performance of “just-in-time, just-in-sequence” auto parts manufacturing and delivery in three tier-1 suppliers of the Nissan plant in Barcelona. This research was conducted at the Barcelona School of Engineering (ETSEIB) and promoted by the Nissan factory in Barcelona. In this paper, first, the concept of synchronous manufacturing is explored. After several improvement ideas are spotted within the Nissan plant, the paper focuses on the suppliers. An intervention approach is proposed. Suppliers are categorized and selected suppliers are analyzed (by means of three case studies, each one corresponding to a different type of supplier). This research contributes to understanding how synchronous manufacturing and delivery can be extended to suppliers and the existing drawbacks. The critical variables in synchronous manufacturing , delivery and the relations between them are identified in a conceptual model termed the M-S Model. Implications for suppliers are derived, allowing us to improve the performance of the whole synchronous manufacturing system. A piece of software is developed to help companies schedule a smooth flow of components, making synchronous manufacturing easier. Results may help decision makers develop a supply management system, including policies, procedures and the necessary resource deployment., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Maximizing comfort in Assembly Lines with temporal, spatial and ergonomic attributes

  • Bautista Valhondo, Joaquín
  • Alfaro Pozo, Rocío
  • Batalla García, Cristina
We aim at maximizing the comfort of operators in mixed-model assembly lines. To achieve this goal, we evaluate two assembly line balancing models: the first that minimizes the maximum ergonomic risk and the second one that minimizes the average absolute deviations of ergonomic risk. Through a case study we compare the results of the two models by two different resolution procedures: the Mixed Integer Linear Programming (MILP) and Greedy Randomized Adaptive Search Procedures (GRASP). Although linear programming offers best solution, the results given by GRASPs are competitive., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Free and regular mixed-model sequences by a linear program-assisted hybrid algorithm GRASP-LP

  • Bautista Valhondo, Joaquín
  • Alfaro Pozo, Rocío
A linear program-assisted hybrid algorithm (GRASP-LP) is presented to solve a mixed-model sequencing problem in an assembly line. The issue of the problem is to obtain manufacturing sequences of product models with the minimum work overload, allowing the free interruption of operations at workstations and preserving the production mix. The implemented GRASP-LP is compared with other procedures through a case study linked with the Nissan’ Engine Plant from Barcelona., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Modelos y métricas para la versión robusta del Car Sequencing Problem con flotas de vehículos especiales

  • Bautista Valhondo, Joaquín
Partiendo del Car Sequencing Problem (CSP), introducimos el concepto de demanda parcial incierta, incorporando Flotas de vehículos especiales en un plan de demanda. Tras establecer las hipótesis de trabajo con Flotas, proponemos un modelo de programación lineal entera mixta (r-CSP) para satisfacer el máximo número de restricciones del CSP. Posteriormente, definimos multi-secuencia de producción y algunas métricas para evaluar su robustez. El r-CSP considera diversos escenarios de demanda y funciones para medir el requerimiento excesivo de opciones en programas de producción. Dichas funciones son válidas como objetivo en problemas de optimización y como métricas de robustez de multi-secuencias de producción., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Consideration of human resources in the Mixed-model Sequencing Problem with Work Overload Minimization: Legal provisions and productivity improvement

  • Bautista Valhondo, Joaquín
  • Alfaro Pozo, Rocío
  • Batalla García, Cristina
Beginning with a variation of the sequencing problem in a mixed-products line (MMSP-W: Mixed-Model Sequencing Problem with Workload Minimization), we propose two new models that incorporate a set of working conditions in regard with human resources of workstations on the line. These conditions come from collective agreements and therefore must be respected by both company and labor unions. The first model takes into account the saturation limit of the workstations, and the second model also includes the activation of the operators throughout the working day. Two computational experiments were carried out using a case study of the Nissan motor plant in Barcelona with two main objectives: (1) to study the repercussions of the saturation limit on the decrease in productivity on the line and (2) to evaluate the recovery of productivity on the line via both activation of operators, while maintaining the same quality in working conditions achieved by limiting the saturation, and auxiliary processors. By results we state that saturation limitation leads an important increase of work overload, which means average economic losses of 28,731.8 Euros/day. However, the productivity reduction may be counteracted by the work pace factor increase, at certain moments of workday, and/or by the incorporation of auxiliary processors into the line., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A case study at the Nissan Barcelona factory to minimize the ergonomic risk and its standard deviation in a mixed-model assembly line

  • Bautista Valhondo, Joaquín
  • Alfaro Pozo, Rocío
This work examines a balancing problem wherein the objective is to minimize both the ergonomic risk dispersion between the set of workstations of a mixed-model assembly line and the risk level of the workstation with the greatest ergonomic factor. A greedy randomized adaptive search procedure (GRASP) procedure is proposed to achieve these two objectives simultaneously. This new procedure is compared against two mixed integer linear programs: the MILP-1 model that minimizes the maximum ergonomic risk of the assembly line and the MILP-2 model that minimizes the average deviation from ergonomic risks of the set of workstations on the line. The results from the case study based on the automotive sector indicate that the proposed GRASP procedure is a very competitive and promising tool for further research., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Models for assembly line balancing by temporal, spatial and ergonomic risk attributes

  • Bautista Valhondo, Joaquín
  • Batalla García, Cristina
  • Alfaro Pozo, Rocío
Assembly lines with mixed products present ergonomic risks that can affect productivity of workers and lines. Because of that, the line balancing must consider the risk of injury in regard with the set of tasks necessary to process a product unit, in addition to other managerial and technological attributes such as the workload or the space. Therefore, in this paper we propose a new approach to solve the assembly line balancing problem considering temporal, spatial and ergonomic attributes at once. We formulate several mathematical models and we analyze the behavior of one of these models through case study linked to Nissan. Furthermore, we study the effect of the demand plan variations and ergonomic risk on the line balancing result, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

An expert system to minimize operational costs in mixed-model sequencing problems with activity factor

  • Bautista Valhondo, Joaquín
  • Alfaro Pozo, Rocío
One of the major issues in industrial environments is currently maximizing productivity while reducing manufacturing cost. This can be seen clearly reflected in mixed-model assembly lines based systems, where obtaining efficient manufacturing sequences is a key to be competitive in a dynamic and globalized market. However, this continuous cost reduction and productivity growth should not penalize the welfare of employees. This work is intended to address this lack of compatibility between the economic and social objectives through the study of the mixed-model sequencing problem from both the business and labor perspective. This is done by considering the possibility of reducing or increasing processing times of operations by varying the work pace of line's operators within the permissible legal boundaries. Thus, depending on this flexible activation time of operators, the amount of completed work and idle time will be one or the other and, consequently, the productivity of the line will also improve or get worse. In this regard, we propose new approach to the sequencing problem without incurring cost increases and providing a safe working environment, in accordance with applicable law. This new approach leads to obtain efficient manufacturing sequences, in terms of both productivity and labor conditions. Specifically, the objective of the new problem is minimizing the unproductive costs of the line by incorporating the possibility of increasing production through the variation of the work pace of line's operators. Increasing the work pace of operators, the amount of non-completed work or the preventable idle time can be reduced and therefore, their associated costs too. In addition, and without losing sight of the effort involved in working with a work pace above the normal, we propose several economic criteria to compensate the activation of workers where necessary, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Modelos y métricas para la versión robusta del Car Sequencing Problem con Flotas de vehículos especiales

  • Bautista Valhondo, Joaquín
Partiendo del Car Sequencing Problem (CSP), introducimos el concepto de demanda parcial incierta, incorporando Flotas de vehículos especiales en un plan de demanda. Tras establecer las hipótesis de trabajo con Flotas, proponemos un modelo de programación lineal entera mixta (r-CSP) para satisfacer el máximo número de restricciones del CSP. Posteriormente, definimos multi-secuencia de producción y algunas métricas para evaluar su robustez. El r-CSP considera diversos escenarios de demanda y funciones para medir el requerimiento excesivo de opciones en programas de producción. Dichas funciones son válidas como objetivo en problemas de optimización y como métricas de robustez de multi-secuencias de producción., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Benefits of robust multiobjective optimization for flexible automotive assembly line balancing

  • Chica Serrano, Manuel
  • Bautista Valhondo, Joaquín
  • de Armas, Jesica
“This is a pre-print of an article published inJ. Flex Serv Manuf. The final authenticated version is available online at: https://doi.org/10.1007/s10696-018-9309-y ” Chica, M., Bautista, J. & de Armas, J. Flex Serv Manuf J (2018). https://doi.org/10.1007/s10696-018-9309-y, Changing conditions and variations in the demand are frequent in real industrial environments. Decision makers have to take into account this uncertainty and manage it properly. One clear example is the automotive industry where manufacturers have to assume an uncertain and heterogeneous demand. For instance, automotive manufacturers must adapt their decisions when balancing the assembly line by considering different flexible solutions. Our proposal is using robust multiobjective optimization and simulation techniques to provide managers with a set of robust and equally-preferred solutions for assembly line balancing. We study a Nissan case where the demand of each product family is uncertain. The problem is addressed by considering a robust multiobjective model for assembly line balancing based on a high number of production plans. After the selection of six different assembly line configurations, we study the implications of robustness metrics based on workstations’ overload. We show that the adverse managerial effects of not having flexible line configuration when demand changes are alleviated. For the real Nissan automotive case, our analysis and conclusions show the managerial and industrial benefits of using robust assembly lines. We also encourage decision makers to use robust multiobjective optimization methods for selecting the most flexible decisions., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Mixed integer linear programming models for minimizing ergonomic risk dispersion in an assembly line at the Nissan Barcelona factory

  • Bautista Valhondo, Joaquín
  • Alfaro Pozo, Rocío
We present a variant of the approach to the assembly line balancing problems, with the aim of reducing the ergonomic risk for operators of mixed-model assembly lines (MILP-3). Specifically, the MILP-3 model is focused on minimizing the average range between ergonomic risk values of workstations. Using a case study from Nissan’s plant in Barcelona, not only are the differences between levels of ergonomic risk of stations reduced, but we attempt to reduce the average maximum ergonomic risk of the assembly line. The new model is compared with two others, MILP-1 and MILP-2, which minimize the average maximum ergonomic risk and the average absolute deviation of the risks, respectively., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A hybrid dynamic programming for solving a mixed-model sequencing problem with production mix restriction and free interruptions

  • Bautista Valhondo, Joaquín
  • Cano Pérez, Alberto
  • Alfaro Pozo, Rocío
In this article, we propose a hybrid procedure based on bounded dynamic programming assisted by linear programming to solve the mixed-model sequencing problem with workload minimization with serial workstations, free interruption of the operations and with production mix restrictions. We performed a computational experiment with 23 instances related to a case study of the Nissan powertrain plant located in Barcelona. The results of our proposal are compared with those obtained by mixed integer linear programming., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

GRASP for sequencing mixed models in an assembly line with work overload, useless time and production regularity