Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Boosting photoelectrochemical water oxidation of hematite in acidic electrolytes by surface state modification

  • Tang, Peng-Yi
  • Han, Li-Juan
  • Simone Hegner, Franziska
  • Paciok, Paul
  • Biset-Peiró, Martí
  • Du, Hong-Chu
  • Wei, Xian-Kui
  • Jin, Lei
  • Xie, Haibing
  • Shi, Qin
  • Andreu, Teresa
  • Lira-Cantú, Mónica
  • Heggen, Marc
  • Dunin-Borkowski, Rafal E.
  • López, Núria
  • Galán-Mascarós, José Ramón
  • Morante, Joan Ramón
  • Arbiol, Jordi
State-of-the-art water-oxidation catalysts (WOCs) in acidic electrolytes usually contain expensive noble metals such as ruthenium and iridium. However, they too expensive to be implemented broadly in semiconductor photoanodes for photoelectrochemical (PEC) water splitting devices. Here, an Earth-abundant CoFe Prussian blue analogue (CoFe-PBA) is incorporated with core–shell Fe2O3/Fe2TiO5 type II heterojunction nanowires as composite photoanodes for PEC water splitting. Those deliver a high photocurrent of 1.25 mA cm−2 at 1.23 V versus reversible reference electrode in acidic electrolytes (pH = 1). The enhancement arises from the synergic behavior between the successive decoration of the hematite surface with nanolayers of Fe2TiO5 and then, CoFe-PBA. The underlying physical mechanism of performance enhancement through formation of the Fe2O3/Fe2TiO5/ CoFe-PBA heterostructure reveals that the surface states’ electronic levels of hematite are modified such that an interfacial charge transfer becomes kinetically favorable. These findings open new pathways for the future design of cheap and efficient hematite-based photoanodes in acidic electrolytes., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO, Grants CTQ2015-71287-R, CTQ2015-71287-R, and CTQ2015-68770-R) and the coordinated Project ValPEC (ENE2017-85087-C3), the BIST Ignite Project inWOC2 and the Generalitat de Catalunya (2017 SGR 90, 2017 SGR 327, 2017 SGR 329, 2017 SGR 1246, and 2017 SGR 1406). ICN2 acknowledges the support from the Severo Ochoa Program (MINECO, Grant SEV-2017-0706). ICN2, ICIQ, and IREC are funded by the CERCA Programme/Generalitat de Catalunya. P.Y.T. acknowledges the scholarship support of DAAD short term grant. H.C.D. acknowledges support from the Deutsche Forschungsgemeinschaft (SFB 917). F.S.H. thanks the “LaCaixa”-Severo Ochoa International Programme (Programa internacional de Becas “LaCaixa”- Severo Ochoa) for a Ph.D. fellowship. P.P. and M.H. thank for the support by the Federal Ministry for Economic Affairs and Energy (BMWi) (Fundingregistration number: 03ET6080E). M.L. thanks the COST Action StableNextSol project MP1307, supported by COST (European Cooperation in Science and Technology). H.X. acknowledges the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295 for the postdoctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Combined high catalytic activity and efficient polar tubular nanostructure in urchin‐like metallic NiCo2Se4 for high‐performance lithium–sulfur batteries

  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Zhang, Ting
  • Du, Ruifeng
  • Li, Junshan
  • Yang, Xuhui
  • Arbiol, Jordi
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
Urchin‐shaped NiCo2Se4 (u‐NCSe) nanostructures as efficient sulfur hosts are synthesized to overcome the limitations of lithium–sulfur batteries (LSBs). u‐NCSe provides a beneficial hollow structure to relieve volumetric expansion, a superior electrical conductivity to improve electron transfer, a high polarity to promote absorption of lithium polysulfides (LiPS), and outstanding electrocatalytic activity to accelerate LiPS conversion kinetics. Owing to these excellent qualities as cathode for LSBs, S@u‐NCSe delivers outstanding initial capacities up to 1403 mAh g−1 at 0.1 C and retains 626 mAh g−1 at 5 C with exceptional rate performance. More significantly, a very low capacity decay rate of only 0.016% per cycle is obtained after 2000 cycles at 3 C. Even at high sulfur loading (3.2 mg cm−2), a reversible capacity of 557 mAh g−1 is delivered after 600 cycles at 1 C. Density functional theory calculations further confirm the strong interaction between NCSe and LiPS, and cytotoxicity measurements prove the biocompatibility of NCSe. This work not only demonstrates that transition metal selenides can be promising candidates as sulfur host materials, but also provides a strategy for the rational design and the development of LSBs with long‐life and high‐rate electrochemical performance., This work corresponds to an extension of activities initially performed around the objectives defined by the Helis project which received funding from the European Union's Horizon 2020 program under the Grant Agreement No. 666221. The authors acknowledge funding from Generalitat de Catalunya2017 SGR 1246 and 2017 SGR 327, the Spanish MINECO projects ENE2016‐77798‐C4‐3‐R and ENE2017‐85087‐C3, and the Zhou Shan Science and Technology Project (2018C21010). C. Zhang and T. Zhang thank the China Scholarship Council (CSC) for scholarship support. IREC acknowledges funding from European Regional Development Funds (ERDF‐FEDER Programa Competitivitat de Catalunya 2007–2013). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV‐2017‐0706) and was funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Degradation and regeneration mechanisms of NiO protective layers deposited by ALD on photoanodes

  • Ros, Carles
  • Andreu, Teresa
  • David, Jeremy
  • Arbiol, Jordi
  • Morante, Joan Ramón
The use of high pH electrolytes requires protective layers to avoid corrosion in photoanodes based on semiconductors like silicon. NiO is one of the materials that comply with the requirements for transparency, conductivity, chemical stability and catalysis on the surface in contact with the electrolyte. Here, NiO layers have been deposited by atomic layer deposition (ALD) at low temperatures, and their stability is analyzed over 1000 hours. Due to the layer structure characteristics, the best overall performance was achieved at 100 °C deposition temperature. By electrochemical measurements progressive time dependent degradation under anodic working conditions is observed, attributed to the formation of higher nickel oxidation states at the electrode/electrolyte interface as a main degradation mechanism, resulting in an OER overpotential increase. Another minor degradation mechanism affects the optical surface quality and gives rise to a loss of photon absorption efficiency on the scale of hundreds of hours. A regeneration process based on in situ periodic cyclic voltammetry, bringing the electrodes to cathodic conditions every 3, 12 or 48 hours, has been shown to partially reverse the main degradation mechanism achieving 85% stability over 1000 hours in a study with over 10 mA cm−2 photocurrent densities., Authors from the IREC acknowledge Generalitat de Catalunya for financial support through the CERCA Programme, M2E (2014SGR1638). The IREC also acknowledges additional support through the European Regional Development Funds (ERDF, FEDER) and MINECO coordinated projects MAT2014-59961-C2, ENE2016-80788-C5-5-R and ENE2017-85087-C3. C. R. acknowledges the MINECO for his FPI grant (BES-2015-071618). The ICN2 was supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. J. D. received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 665919 (P-SPHERE) co-funded by the Severo Ochoa Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hierarchical porous Ni3S4 with enriched high‐valence Ni sites as a robust electrocatalyst for efficient oxygen evolution reaction

  • Wan, Kai
  • Luo, Jiangshui
  • Zhou, Chen
  • Zhang, Ting
  • Arbiol, Jordi
  • Lu, Xihong
  • Mao, Bing-Wei
  • Zhang, Xuan
  • Fransaer, Jan
Electrochemical water splitting is a common way to produce hydrogen gas, but the sluggish kinetics of the oxygen evolution reaction (OER) significantly limits the overall energy conversion efficiency of water splitting. In this work, a highly active and stable, meso–macro hierarchical porous Ni3S4 architecture, enriched in Ni3+ is designed as an advanced electrocatalyst for OER. The obtained Ni3S4 architectures exhibit a relatively low overpotential of 257 mV at 10 mA cm−2 and 300 mV at 50 mA cm−2. Additionally, this Ni3S4 catalyst has excellent long‐term stability (no degradation after 300 h at 50 mA cm−2). The outstanding OER performance is due to the high concentration of Ni3+ and the meso–macro hierarchical porous structure. The presence of Ni3+ enhances the chemisorption of OH−, which facilitates electron transfer to the surface during OER. The hierarchical porosity increases the number of exposed active sites, and facilitates mass transport. A water‐splitting electrolyzer using the prepared Ni3S4 as the anode catalyst and Pt/C as the cathode catalyst achieves a low cell voltage of 1.51 V at 10 mA cm−2. Therefore, this work provides a new strategy for the rational design of highly active OER electrocatalysts with high valence Ni3+ and hierarchical porous architectures., K.W. is grateful to the Oversea Study Program of Guangzhou Elite Project. The Open Project Program of Provincial Key Laboratory of Clean Energy Materials, Longyan University (QJNY‐201705) is also acknowledged. X.Z. is grateful to the China Scholarship Council. J.L. acknowledges the Research Foundation – Flanders (FWO) for a Research Project (G0B3218N) and a Research Grant (1529816N). Funding from the National Natural Science Foundation of China (No. 21776120), and “Minjiang Scholar” Program and key project (No. JZ160480) of Department of Education, Fujian Province, China is also acknowledged. ICN2 members acknowledge funding from Generalitat de Catalunya2017 SGR 327 and the Spanish MINECO project VALPEC (ENE2017‐85087‐C3). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant No. SEV‐2013‐0295) and was funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work was performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. T.Z. received funding from the CSC‐UAB Ph.D. scholarship program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multilayered hematite nanowires with thin‐film silicon photovoltaics in an all‐earth‐abundant hybrid tandem device for solar water splitting

  • Urbain, Félix
  • Tang, Peng-Yi
  • Smirnov, Vladimir
  • Welter, Katharina
  • Andreu, Teresa
  • Finger, Friedhelm
  • Arbiol, Jordi
  • Morante, Joan Ramón
The concept of hybrid tandem device structures that combine metal oxides with thin‐film semiconducting photoabsorbers holds great promise for large‐scale, robust, and cost‐effective bias‐free photoelectrochemical water splitting (PEC‐WS). This work highlights important steps toward the efficient coupling of high‐performance hematite photoanodes with multijunction thin‐film silicon photocathodes providing high bias‐free photocurrent density. The hybrid PEC‐WS device is optimized by testing three types of multijunction silicon photocathodes with the hematite photoanode: amorphous silicon (a‐Si:H) tandem: a‐Si:H/a‐Si:H and triple junction with microcrystalline silicon (μc‐Si:H): a‐Si:H/a‐Si:H/μc‐Si:H and a‐Si:H/μc‐Si:H/μc‐Si:H. The results provide evidence that the multijunction structures offer high flexibility for hybrid tandem devices with regard to tunable photovoltages and spectral matching. Furthermore, both photoanode and photocathode are tested under various electrolyte and light concentration conditions, respectively, with respect to their photoelectrochemical performance and stability. A 27 % enhancement in the solar‐to‐hydrogen conversion efficiency is observed upon concentrating light from 100 to 300 mW cm−2. Ultimately, bias‐free water splitting is demonstrated, with a photocurrent density of 4.6 mA cm−2 (under concentrated illumination) paired with excellent operation stability for more than 24 h of the all‐earth‐abundant and low‐cost hematite/silicon tandem PEC‐WS device., The authors acknowledge funding from Generalitat de Catalunya through the CERCA program, 2017 SGR 1246, 2017 SGR 327 and the Spanish MINECO projects MAT2014‐59961, ENE2016‐80788‐C5‐5‐R and ENE2017‐85087, together with the support from REPSOL, S. A. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV‐2017‐0706). IREC also acknowledges additional support from the European Regional Development Funds (ERDF, FEDER), (S)TEM part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program and the rest in the Nanoscience program of the University of Barcelona. The authors thank S. Moll (IEK‐5), M. Biset‐Peiró (IREC), and H. Xie (IREC) for their contribution to this work. F.U. acknowledges financial support from MINECO through Juan de la Cierva fellowship (FJCI‐2016–29147).V.S., K.W., and F.F. (authors from IEK‐5) thank the Deutsche Forschungsgemeinschaft (DFG) (Priority Program SPP 1613)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Role of boron and phosphorus in enhanced electrocatalytic oxygen evolution by nickel borides and nickel phosphides

  • Masa, Justus
  • Andronescu, Corina
  • Antoni, Hendrik
  • Sinev, Ilya
  • Seisel, Sabine
  • Elumeeva, Karina
  • Barwe, Stefan
  • Martí-Sànchez, Sara
  • Arbiol, Jordi
  • Roldán Cuenya, Beatriz
  • Muhler, Martin
  • Schuhmann, Wolfgang
The modification of nickel with boron or phosphorus leads to significant enhancement of its electrocatalytic activity for the oxygen evolution reaction (OER). However, the precise role of the guest elements, B and P, in enhancing the OER of the host element (Ni) remains unclear. Herein, we present insight into the role of B and P in enhancing electrocatalysis of oxygen evolution by nickel borides and nickel phosphides. The apparent activation energy, Ea*, of electrocatalytic oxygen evolution on Ni2P was 78.4 kJ/mol, on Ni2B 65.4 kJ/mol, and on Ni nanoparticles 94.0 kJ/mol, thus revealing that both B and P affect the intrinsic activity of nickel. XPS data revealed shifts of −0.30 and 0.40 eV in the binding energy of the Ni 2p3/2 peak of Ni2B and Ni2P, respectively, with respect to that of pure Ni at 852.60 eV, thus indicating that B and P induce opposite electronic effects on the surface electronic structure of Ni. The origin of enhanced activity for oxygen evolution cannot, therefore, be attributed to such electronic modification or ligand effect. Severe changes induced on the nickel lattice, specifically, the Ni‐Ni atomic order and interatomic distances (strain effect), by the presence of the guest atoms seem to be the dominant factors responsible for enhanced activity of oxygen evolution in nickel borides and nickel phosphides., The authors acknowledge support by the BMBF in the framework of the project “NEMEZU” (03SF0497B). SMS acknowledges funding from “Programa Internacional de Becas ”la Caixa“‐Severo Ochoa”. J.A. and S.M.S. acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project VALPEC (ENE2017‐85087‐C3). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV‐2013‐0295) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailor-made metal-nitrogen-carbon bifunctional electrocatalysts for rechargeable Zn-air batteries via controllable MOF units

  • Zhang, Xuan
  • Luo, Jiangshui
  • Lin, Heng-Fu
  • Tang, Peng-Yi
  • Morante, Joan Ramón
  • Arbiol, Jordi
  • Wan, Kai
  • Mao, Bing-Wei
  • Liu, Li-Min
  • Fransaer, Jan
The majority of chemical syntheses involve the use of catalysts, which play a crucial role in the yield and conversion rates of chemical reactions. In view of the increasing demand for chemical commodities and specialties linked to the growth of the world's population and the living standards, highly efficient and low-cost catalysts are urgently required. The metal-nitrogen-carbon (M-N-C) catalysts family is one of the most promising candidates. In this work, a series of benzene-1,3,5-tricarboxylate linker based metal organic frameworks (MOFs) were used as self-sacrificial templates and tunable platform for designable preparation of M-N-C catalysts. Changing the pillars between the 2D layers and the nature of the metal ions in the pristine MOFs significantly influenced the structure, chemical composition and catalytic activity of the resulting M-N-C catalysts for the oxygen reduction reaction (ORR). Furthermore, the influence of the MOF units on the catalyst performance, the role of the metals in the M-N-C catalysts and the primary catalytically active sites for ORR were explored by a combination of density functional theory (DFT), in-depth structural and chemical/elemental characterizations, and electrochemical studies. Among the prepared catalysts, Co-BTC-bipy-700 exhibited the highest electrocatalytic activity for oxygen reduction reaction (ORR), which showed a larger limiting current density and similar half-wave potentials with less catalyst degradation and much higher methanol tolerance than the commercial Pt/C catalyst. Meanwhile, as a bifunctional electrocatalyst, Co-BTC-bipy-700 catalyst was also employed for oxygen evolution reaction (OER) and demonstrated a lower overpotential (lowered by 140 mV at a current density of 10 mA cm−2) and better durability than IrO2. Furthermore, in terms of device performance, the Zn-air battery enabled by Co-BTC-bipy-700 catalyst reached a maximum specific energy as high as 1009.8 Wh kg−1, which is 76.5% of the theoretical value (1320 Wh kg−1), and demonstrated higher discharge potential and lower charge potential than that based on the Pt/C catalyst. Importantly, the presented strategy for tailor-made M-N-C catalysts by controlling the synthesis of the pristine MOFs could offer a guide map for the future design of M-N-C catalysts family not only for electrochemical reactions but also beyond electrochemistry., X. Zhang is grateful to China Scholarship Council (China). J. Luo acknowledges the Research Foundation – Flanders (FWO, Belgium) for a Research Project (G0B3218N), Research Grant (1529816N) and a travel grant (V410316N) for a Visiting Professorship at the Technical University of Denmark. Heng-Fu Lin acknowledges the National Natural Science Foundation of China (11747154) and Tianhe-2JK computing time allocation at the Beijing Computational Science Research Center (CSRC, China). ICN2 and IREC acknowledge, respectively, funding from Generalitat de Catalunya 2017 SGR 327 and 1246 (Spain); the Spanish MINECO coordinated project VALPEC (ENE2017-85087-C3), Spain. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2013-0295, SEV-2017-0706), Spain. Likewise, ICN2 and IREC are funded by the CERCA Programme / Generalitat de Catalunya, Spain. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. JRM is belonging to University of Barcelona. Funding from the National Natural Science Foundation of China (No. 21776120, China), "Minjiang Scholar" Program and key project (No. JZ160480, China) of Department of Education, Fujian Province, China, and Open Project (No. 201607, China) of State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Upscaling high activity oxygen evolution catalysts based on CoFe2O4 nanoparticles supported on nickel foam for power-to-gas electrochemical conversion with energy efficiencies above 80%

  • Urbain, Félix
  • Du, Ruifeng
  • Tang, Peng-Yi
  • Smirnov, Vladimir
  • Andreu, Teresa
  • Finger, Friedhelm
  • Divins, Núria J.
  • Llorca, Jordi
  • Arbiol, Jordi
  • Cabot, Andreu
  • Morante, Joan Ramón
We investigate cobalt ferrite nanoparticles (NPs) supported on large-scale electrodes as oxygen evolution reaction (OER) catalysts. Colloidal CoFe2O4 NPs were loaded on low-cost and high surface area nickel foam (NF) scaffolds. The coating process was optimized for large electrode areas, ensuring a proper distribution of the NPs on the NF that allowed overcoming the electrical conductivity limitations of oxide NPs. We were able to produce CoFe2O4-coated NFs having 10 cm2 geometric surface areas with overpotentials below 300 mV for the OER at a current density of 50 mA/cm2. Such impressively low overpotentials suggested using CoFe2O4 NP-based electrodes within a water electrolysis device. In this prototype device, stable operating currents up to 500 mA at remarkably low cell-voltages of 1.62 and 1.53 V, at ambient and 50 °C electrolyte temperatures, respectively, were reached during operation periods of up to 50 h. The high electrochemical energy efficiencies reached at 50 mA/cm2, 75% and 81% respectively, rendered these devices particularly appealing to be combined with low-cost photovoltaic systems for bias-free hydrogen production. Therefore, CoFe2O4 NP-based electrolysers were coupled to low-cost thin-film silicon solar cells with 13% efficiency to complete a system that afforded solar-to-fuel efficiencies above 10%., Authors acknowledge funding from Generalitat de Catalunya through the CERCA program, 2017 SGR 1246, 2017 SGR 327 and the Spanish MINECO projects MAT2014-59961, ENE2016-80788-C5-5-R, ENE2016-77798-C4-3-R and ENE2017-85087, together with the support from Repsol S. A. Likewise, the authors thank Enagás S.A. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). IREC also acknowledges additional support from the European Regional Development Funds (ERDF, FEDER), (S)TEM part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program and the rest in the Nanoscience program of the University of Barcelona. The authors thank S. Moll (IEK-5), M. Biset-Peiró (IREC), and H. Xie (IREC) for their contribution to this work. F.U. acknowledges financial support from MINECO through Juan de la Cierva fellowship (FJCI-2016-29147).V.S. and F.F. (authors from IEK-5) thank the Deutsche Forschungsgemeinschaft (DFG) (Priority Program SPP 1613). J. Llorca is a Serra Húnter Fellow and is grateful to ICREA Academia program and funding from Generalitat de Catalunya 2017 SGR 128., Peer reviewed