Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

High-fidelity simulations of the mixing and combustion of a technically premixed hydrogen flame

  • Mira Martínez, Daniel
  • Both, Ambrus|||0000-0002-5267-204X
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Gomez Gonzalez, Samuel
  • Forck, Jonathan
  • Tanneberger, Tom
  • Stathopoulos, Panagiotis
  • Paschereit, Christian Oliver
Numerical simulations are used here to obtain further understanding on the flashback mechanism of a technically premixed hydrogen flame operated in lean conditions. Recent work from the authors (Mira et al., 2020) showed that the hydrogen momentum strongly influences the flame dynamics and plays a fundamental role on the stability limits of the combustor. The axial injection influences the vortex breakdown position and therefore, the propensity of the burner to produce flashback. This work is an extension of our previous work where we include a detailed description of the mixing process and the influence of equivalence ratio fluctuations and heat loss on the flame dynamics., The research activities conducted here have been financed by the CoEC project from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 952181., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

LES study of the impact of fuel composition on a swirl spray flame approaching blow-off

  • Both, Ambrus|||0000-0002-5267-204X
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
The present paper focuses on the large eddy simulation (LES) of the n-heptane and n-dodecane flames of the Cambridge swirl flames data repository (Sidey et al., 2017). The applied tabulated chemistry spray combustion model reproduces well the key phenomena controlling flame dynamics. The distinct volatility of the fuels is identified as the source of main difference between the n-heptane and n-dodecane flames., We acknowledge the funding from the CoEC project through the European Union’s Horizon 2020 research and innovation programme under grant agreement No 952181. The authors thankfully acknowledge the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (FI-2019-1-0045, IM-2019-3-0019, IM-2020- 1-0011, IM-2020-2-0025.), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Semi implicit solver for high fidelity LES/DNS solutions of reacting flows

  • Surapaneni, Anurag
  • Mira Martínez, Daniel
A semi-implicit/point-implicit stiff solver (ODEPIM) for integrating chemistry in context of high fidelity LES/DNS simulations is presented. A detailed overview of the algorithm and its numerical formulation is discussed. The solver is then compared against a state-of-the-art multi-order implicit solver CVODE in terms of accuracy and costs. It was found that for typical LES/DNS timestep sizes ODEPIM was about one order faster than CVODE, which would make it a compelling alternative to pure implicit methods. ODEPIM, as mentioned in the literature depends on a fixed sub-timestep size to do the integration steps, this limits the speedup that can be achieved by the solver. A modification to the ODEPIM algorithm to determine the sub-timestep size dynamically is proposed enabling greater speedup. Solutions of a triple flame problem obtained using static and dynamic ODEPIM solvers are compared against the reference solutions obtained with CVODE. The dynamic ODEPIM solver was found to use the maximum permissible sub-timestep size, which on average was 8 to 4 times higher that the fixed sub-timestep size of the static ODEPIM solver. The size of the sub-timestep size directly correlates to the cpu cost, hence the dynamic ODEPIM solver is significantly faster than the static solver, this improvement however, comes at negligible loss in accuracy., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Influence of axial air injection on the flame stability of a technically premixed hydrogen flame

  • Mira Martínez, Daniel
  • Both, Ambrus|||0000-0002-5267-204X
  • Surapaneni, Anurag
This work is a numerical investigation on the stability of a hydrogen flame in a swirl-stabilized burner configuration using large-eddy simulation with tabulated chemistry. Experimental results from this combustor showed that the axial injection influences the vortex breakdown (VB) position and therefore, the propensity of the burner to produce flashback. It is found that depending on the combination of primary swirl flow and amount of axial air injection, the flow can exhibit self-excited oscillations, and more importantly, it can control the flashback safety. Numerical simulations are used here to investigate different combinations of axial air injection and evaluate its impact on flame stability and flashback resistance. It is found that the axial air injection influences the flame stabilization and the position of the central recirculation zone. The penetration of the flame in the mixing tube introduces a strong expansion and acceleration of the flow, which results in a reduction of the spreading angle and eventually a flashback event., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the CoEC project, grant agreement No. 952181., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Optimization of the progress variable definition using a genetic algorithm for the combustion of complex fuels

  • Both, Ambrus|||0000-0002-5267-204X
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
In this work counterflow diffusion flamelets of n-heptane and air are used at stable and unsteady extinguishing conditions for building a thermo-chemical database for Computational Fluid Dynamics (CFD) calculations. The injectivity of the progress variable definition is achieved through an optimization process using a genetic algorithm in combination with an adequate objective function., The research activities conducted here have been financed by the CoEC project from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 952181. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 713673. Ambrus Both has received financial support from "la Caixa" Fundation (ID 100010434). The fellowship grant code is LCF/BQ/IN17/11620032. We also acknowledge Red Española de Supercom- putación (RES) for awarding us access to the MareNostrum IV machine based in Barcelona, Spain (Ref. IM-2020-2-0025), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Numerical assessment of the effect of hydrogen enrichment of a technically premixed swirl-stabilized natural gas flame

  • Pachano Prieto, Leonardo
  • Surapaneni, Anurag
  • Both, Ambrus|||0000-0002-5267-204X
  • Ax, Holger
  • Petry, Niklas
  • Boxx, Isaac
  • Mira Martínez, Daniel
Publicat en accés obert amb el permís explícit de l'editorial., High-fidelity large eddy simulations (LES) are conducted for lean natural gas flames with different levels of hydrogen enrichment in a technically premixed swirl-stabilized combustor (PRECCINSTA) operated at atmospheric pressure. The modelling approach relies on tabulation of premixed flamelets and presumed-shape probability density functions (PDF) to account for subgrid turbulence-chemistry interactions. Results are presented for non-reacting and reacting conditions with 0, 40 and 50% hydrogen content in the natural gas. The influence of hydrogen-enrichment is investigated here by combining LES with Raman measurements. The assessment of LES shows good predictions of the flame stabilization mechanism, flow field and flame dynamics as compared to experiments. The natural gas flame develops a self-excited flow oscillation characterized as a precessing vortex core, which is well reproduced by the LES. The lean operation of the burner with natural gas shows a stable M-shape flame that transitions to a V-shape fully attached flame as the main fuel is blended with hydrogen. Raman measurements are compared with LES data to examine the flame structure and burning characteristics. It is concluded that hydrogen addition makes the flame more compact, induces higher reactivity of the fuel-air mixture and leads to a stable V-shape flame fully attached to the burner’s nozzle-cone., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 682383), the Center of Excellence in Combustion project (grant agreement No 952181), and the AHEAD PID2020-118387RB-C33 and ORION TRA2017-89139-C2-2-R projects from the Ministerio de Ciencia e Innovación. Leonardo Pachano acknowledges the Margarita Salas grant from Ministerio de Universidades (Spain) funded by the European Union-Next Generation EU. The authors thankfully acknowledge the computer resources from the RES (IM-2022-2-0003)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Assessment of tabulated chemistry models for the les of a model aero-engine combustor

  • Both, Ambrus|||0000-0002-5267-204X
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
Tabulated chemistry methods present a compromise between computational cost and the ability to capture complex combustion physics in high-fidelity numerical simulations. The application of such models entails a number of modeling decisions, that may affect the simulation results significantly, especially in partially premixed combustion, where the assumption of the existence of underlying premixed or non-premixed flamelet structures is arguable. In this work, different classical tabulation strategies are assessed in terms of their ability to predict the lift-off induced by localized extinction in a model aero-engine combustion chamber: the Cambridge swirl spray flame. The lift-off dynamics of the stable n-heptane spray flame are compared using: i) premixed flamelets, ii) stable and unstable counterflow diffusion flamelets, iii) stable and unsteady extinguishing counterflow diffusion flamelets, iv) unsteady extinguishing and reigniting counterflow diffusion flamelets at a given strain rate. The extinction and reignition events associated to the lift-off are validated against OH-PLIF measurements, and the temporal evolution of the lift-off and reattachment is analyzed., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the CoEC project, grant agreement No. 952181 and the Clean Sky 2 Joint Undertaking ESTiMatE project under grant agreement No 821418., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Influence of axial air injection on the flame stability of a technically premixed hydrogen flame

  • Mira Martínez, Daniel
  • Both, Ambrus
  • Surapaneni, Anurag
This work is a numerical investigation on the stability of a hydrogen flame in a swirl-stabilized burner configuration using large-eddy simulation with tabulated chemistry. Experimental results from this combustor showed that the axial injection influences the vortex breakdown (VB) position and therefore, the propensity of the burner to produce flashback. It is found that depending on the combination of primary swirl flow and amount of axial air injection, the flow can exhibit self-excited oscillations, and more importantly, it can control the flashback safety. Numerical simulations are used here to investigate different combinations of axial air injection and evaluate its impact on flame stability and flashback resistance. It is found that the axial air injection influences the flame stabilization and the position of the central recirculation zone. The penetration of the flame in the mixing tube introduces a strong expansion and acceleration of the flow, which results in a reduction of the spreading angle and eventually a flashback event., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the CoEC project, grant agreement No. 952181., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

LES study of the impact of fuel composition on a swirl spray flame approaching blow-off

  • Both, Ambrus
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol
The present paper focuses on the large eddy simulation (LES) of the n-heptane and n-dodecane flames of the Cambridge swirl flames data repository (Sidey et al., 2017). The applied tabulated chemistry spray combustion model reproduces well the key phenomena controlling flame dynamics. The distinct volatility of the fuels is identified as the source of main difference between the n-heptane and n-dodecane flames., We acknowledge the funding from the CoEC project through the European Union’s Horizon 2020 research and innovation programme under grant agreement No 952181. The authors thankfully acknowledge the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (FI-2019-1-0045, IM-2019-3-0019, IM-2020- 1-0011, IM-2020-2-0025.), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Optimization of the progress variable definition using a genetic algorithm for the combustion of complex fuels

  • Both, Ambrus
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol
In this work counterflow diffusion flamelets of n-heptane and air are used at stable and unsteady extinguishing conditions for building a thermo-chemical database for Computational Fluid Dynamics (CFD) calculations. The injectivity of the progress variable definition is achieved through an optimization process using a genetic algorithm in combination with an adequate objective function., The research activities conducted here have been financed by the CoEC project from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 952181. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 713673. Ambrus Both has received financial support from "la Caixa" Fundation (ID 100010434). The fellowship grant code is LCF/BQ/IN17/11620032. We also acknowledge Red Española de Supercom- putación (RES) for awarding us access to the MareNostrum IV machine based in Barcelona, Spain (Ref. IM-2020-2-0025), Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Semi implicit solver for high fidelity LES/DNS solutions of reacting flows

  • Surapaneni, Anurag
  • Mira Martínez, Daniel
A semi-implicit/point-implicit stiff solver (ODEPIM) for integrating chemistry in context of high fidelity LES/DNS simulations is presented. A detailed overview of the algorithm and its numerical formulation is discussed. The solver is then compared against a state-of-the-art multi-order implicit solver CVODE in terms of accuracy and costs. It was found that for typical LES/DNS timestep sizes ODEPIM was about one order faster than CVODE, which would make it a compelling alternative to pure implicit methods. ODEPIM, as mentioned in the literature depends on a fixed sub-timestep size to do the integration steps, this limits the speedup that can be achieved by the solver. A modification to the ODEPIM algorithm to determine the sub-timestep size dynamically is proposed enabling greater speedup. Solutions of a triple flame problem obtained using static and dynamic ODEPIM solvers are compared against the reference solutions obtained with CVODE. The dynamic ODEPIM solver was found to use the maximum permissible sub-timestep size, which on average was 8 to 4 times higher that the fixed sub-timestep size of the static ODEPIM solver. The size of the sub-timestep size directly correlates to the cpu cost, hence the dynamic ODEPIM solver is significantly faster than the static solver, this improvement however, comes at negligible loss in accuracy., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

High-fidelity simulations of the mixing and combustion of a technically premixed hydrogen flame

  • Mira Martínez, Daniel
  • Both, Ambrus
  • Lehmkuhl Barba, Oriol
  • Gomez Gonzalez, Samuel
  • Forck, Jonathan
  • Tanneberger, Tom
  • Stathopoulos, Panagiotis
  • Paschereit, Christian Oliver
Numerical simulations are used here to obtain further understanding on the flashback mechanism of a technically premixed hydrogen flame operated in lean conditions. Recent work from the authors (Mira et al., 2020) showed that the hydrogen momentum strongly influences the flame dynamics and plays a fundamental role on the stability limits of the combustor. The axial injection influences the vortex breakdown position and therefore, the propensity of the burner to produce flashback. This work is an extension of our previous work where we include a detailed description of the mixing process and the influence of equivalence ratio fluctuations and heat loss on the flame dynamics., The research activities conducted here have been financed by the CoEC project from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 952181., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Assessment of tabulated chemistry models for the les of a model aero-engine combustor

  • Both, Ambrus
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol
Tabulated chemistry methods present a compromise between computational cost and the ability to capture complex combustion physics in high-fidelity numerical simulations. The application of such models entails a number of modeling decisions, that may affect the simulation results significantly, especially in partially premixed combustion, where the assumption of the existence of underlying premixed or non-premixed flamelet structures is arguable. In this work, different classical tabulation strategies are assessed in terms of their ability to predict the lift-off induced by localized extinction in a model aero-engine combustion chamber: the Cambridge swirl spray flame. The lift-off dynamics of the stable n-heptane spray flame are compared using: i) premixed flamelets, ii) stable and unstable counterflow diffusion flamelets, iii) stable and unsteady extinguishing counterflow diffusion flamelets, iv) unsteady extinguishing and reigniting counterflow diffusion flamelets at a given strain rate. The extinction and reignition events associated to the lift-off are validated against OH-PLIF measurements, and the temporal evolution of the lift-off and reattachment is analyzed., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the CoEC project, grant agreement No. 952181 and the Clean Sky 2 Joint Undertaking ESTiMatE project under grant agreement No 821418., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Numerical assessment of the effect of hydrogen enrichment of a technically premixed swirl-stabilized natural gas flame

  • Pachano Prieto, Leonardo
  • Surapaneni, Anurag
  • Both, Ambrus
  • Ax, Holger
  • Petry, Niklas
  • Boxx, Isaac
  • Mira Martínez, Daniel
Publicat en accés obert amb el permís explícit de l'editorial., High-fidelity large eddy simulations (LES) are conducted for lean natural gas flames with different levels of hydrogen enrichment in a technically premixed swirl-stabilized combustor (PRECCINSTA) operated at atmospheric pressure. The modelling approach relies on tabulation of premixed flamelets and presumed-shape probability density functions (PDF) to account for subgrid turbulence-chemistry interactions. Results are presented for non-reacting and reacting conditions with 0, 40 and 50% hydrogen content in the natural gas. The influence of hydrogen-enrichment is investigated here by combining LES with Raman measurements. The assessment of LES shows good predictions of the flame stabilization mechanism, flow field and flame dynamics as compared to experiments. The natural gas flame develops a self-excited flow oscillation characterized as a precessing vortex core, which is well reproduced by the LES. The lean operation of the burner with natural gas shows a stable M-shape flame that transitions to a V-shape fully attached flame as the main fuel is blended with hydrogen. Raman measurements are compared with LES data to examine the flame structure and burning characteristics. It is concluded that hydrogen addition makes the flame more compact, induces higher reactivity of the fuel-air mixture and leads to a stable V-shape flame fully attached to the burner’s nozzle-cone., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 682383), the Center of Excellence in Combustion project (grant agreement No 952181), and the AHEAD PID2020-118387RB-C33 and ORION TRA2017-89139-C2-2-R projects from the Ministerio de Ciencia e Innovación. Leonardo Pachano acknowledges the Margarita Salas grant from Ministerio de Universidades (Spain) funded by the European Union-Next Generation EU. The authors thankfully acknowledge the computer resources from the RES (IM-2022-2-0003)., Peer Reviewed, Postprint (published version)