Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

LES of a pressurized sooting aero-engine model burner using a computationally efficient discrete sectional method coupled to tabulated

  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Olmeda-Ramiro, Iván
  • Kalbhor, A.
  • Mira Martínez, Daniel
  • Van-Oijen, Jeroen
[EN] This work is focused on the modeling and analysis of soot formation and oxidation in the pressurized ethylene-based model burner investigated at DLR. This burner features a dual swirler configuration for the primary air supply and includes secondary dilution jets inside the combustion chamber, showing reacting flow characteristics representative of the RQL combustor technology. Large-eddy simulations (LES) of the DLR burner are conduced here to assess a coupling approach between flamelet generated manifold (FGM) chemistry and discrete sectional method (DSM) based soot model with clustering method. First, a validation of the numerical results is conducted for the gas velocity and temperature fields, and good agreement is obtained for both mean and fluctuating quantities. The Soot Volume Fraction (SVF) computed from LES shows a satisfactory agreement with the experimental data in both SVF distribution and magnitude. The analysis also includes a numerical investigation of the soot production and the Particle Size Distributions (PSD). Finally, the configuration without secondary air is evaluated and an accurate prediction of the SVF field is also obtained. In this case, the absence of dilution air strongly influences the central region of the combustion chamber, and soot distribution and PSD are mainly affected by transport and dilution, not oxidation. It is finally concluded the proposed modeling framework is capable of predicting the soot field and particle size distributions inside the combustor for both operating conditions., The research leading to these results has received funding from the European Union's Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C21 and TED2021-131618B-C22 projects from the Ministerio de Ciencia e Innovacion, Spain. We acknowledge PRACE for awarding us access through the SootAero project to HAWK at GCS@HLRS, Germany. The authors thankfully acknowledge the computer resources at LaPalma and MareNos-trum, and the technical support provided by Instituto de Astrofisica de Canarias (IM-2021-2-0027) and Barcelona Supercomputing Center (IM-2021-3-0016) . I. Olmeda acknowledges the Ayuda de Formacion de Profesorado Universitario (FPU 18/03065) from the Subprograma de Estatal de Formacion del Ministerio de Ciencia, Innovacion y Universidades of Spain. DM acknowledges the grant Ayudas para contratos Ramon y Cajal (RYC) 2021: RYC2021-034654-I from Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

A novel inlet boundary condition for VOF-DNS simulations of the primary breakup of prefilming airblast atomizers

  • Payri, Raul|||0000-0001-7428-5510
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • Moreno-Montagud, Carlos
[EN] Prefilming airblast atomizers are becoming widely used in state-of-the-art aero engines. The planar configuration experimentally studied by the Karlsruhe Institute of Technology (KIT) has been computationally replicated by different research groups through both Large Eddy Simulation (LES) and Direct Numerical Simulation (DNS). The present investigation reports the use of a novel inlet boundary condition for the DNS study of prefilming airblast atomization that allows accounting not only for the inflow turbulence but also for the temporal evolution of the liquid film thickness at the DNS inlet. The methodology implies the resolution of subsequent singlephase LES, two-phase flow LES and two-phase flow DNS. The former simulations are solved by using the interFoam solver from the OpenFoam toolbox, whereas the latter is computed with the PARIS open-source code. Results for a widely known operating condition show a different degree of atomization when the liquid film thickness evolution is accounted for than the one obtained through the use of a constant liquid film thickness at the domain inlet., Research leading to these results has received funding from the Clean Sky 2 Joint Undertaking under European Union¿s Horizon 2020 research and innovation programme through the ESTiMatE project, grant agreement 821418. We acknowledge PRACE for awarding us access to computational resources on JOLIOT CURIE-AMD at GENCI@CEA, France (proposal 2019204944). Support given to Carlos Moreno by Universitat Politècnica de València through the ¿FPI-Subprograma 2¿ grant within the ¿Programa de Apoyo para la Investigación y Desarrollo (PAID-01-19)¿ is acknowledged. We must thank Marco Crialesi and Wojciech Aniszewski for their technical advice on custom modifications on PARIS, and Johan Sundin for his implementation of the contact angle model. We also thank Achille Schmitter, Hugo Martínez and Lucas González for help processing the 1-phase LES, 2-phase LES and DNS, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Combustion modeling in a pressurized gas turbine burner using Large-Eddy Simulations

  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Olmeda-Ramiro, Iván
  • Both, A.
  • Mira, D.
The research leading to these results has received funding from the European Union's Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418. The authors thankfully acknowledge the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (IM-2020-3-0022, IM-2021-1-0016).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A computational methodology to account for the liquid film thickness evolution in Direct Numerical Simulation of prefilming airblast atomization

  • Payri, Raul|||0000-0001-7428-5510
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • Moreno-Montagud, C.
[EN] Prefilming airblast atomization is becoming widely used in current aero engines. Fundamental studies on the actual annular configuration of airblast atomizers are difficult to realize. For this reason, researchers have also focused on planar configurations. In this regard, the Karlsruhe Institute of Technology (KIT) developed a test rig to conduct experimental activities, conforming a large database with results for different working fluids and operating conditions. Such data allow two-phase flow modelers to validate their calculations concerning primary atomization on these devices. The present investigation proposes a Direct Numerical Simulation (DNS) study on the KIT planar configuration through the Volume of Fluid (VOF) method within the PARIS Simulator code. The novelty compared to DNS works reported in the literature resides in the use of a boundary condition that allows accounting not only for the gas inflow turbulence but also for the spatio-temporal evolution of the liquid film thickness at the DNS inlet and its related effect on turbulence. The proposed methodology requires computing precursor single-phase and two-phase flow Large-Eddy Simulations on the prefilmer flow, with the assumption that the flow between computational domains is one-way coupled. Results are compared to DNS that only account for a constant (both timewise and spanwise) liquid film thickness at the domain inlet, validating the full methodology workflow. The proposed methodology is shown to improve the qualitative description of the atomization mechanism, as the different stages of breakup (liquid accumulation behind the prefilmer edge, bag formation, bag breakup, ligament formation and ligament breakup) coexist spanwise for a given temporal snapshot. This implies a more continuous atomization than the one predicted by the constant film thickness case, which showed the same breakup stage to be present along the prefilmer span for a given instant and led to a more discretized set of atomization events. The proposed workflow allows quantifying the influence of the liquid film flow evolution above the prefilmer surface on primary breakup frequency and relevant atomization features., Research leading to these results has received funding from the Clean Sky 2 Joint Undertaking European Union's Horizon 2020 research and innovation programme through the ESTiMatE project, grant agreement 821418. The authors acknowledge PRACE for awarding access to computational resources on JOLIOT CURIE-AMD at GENCI@ CEA, France (proposal 2019204944). Computer resources at Marenostrum Supercomputer and the technical support provided by Barcelona Supercomputing Center (RES IM-2020-3-0018 and IM-2021-1-0010) in the frame of the Spanish Supercomputing Network is also thankfully acknowledged. Additionally, the support given to Mr. Carlos Moreno by Universitat Politecnica de Valencia, Spain through the "FPI Subprograma 2"grant within the "Programa de Apoyo para la Investigacion y Desarrollo (PAID-01-19)"is acknowledged. The authors must also thank Marco Crialesi and Wojciech Aniszewski for their technical advice on custom modifications on PARIS, and Johan Sundin for his implementation of the contact angle model. Help from Achille Schmitter, Hugo Martinez and Lucas Gonzalez processing the single-phase LES, two-phase LES, and DNS, respectively, is also appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Assessment of Detailed Combustion and Soot Models for High-Fidelity Aero-Engine Simulations

  • Olmeda Ramiro, Iván
[ES] En los últimos años, el interés por el desarrollo de motores de aviación limpios y eficientes se ha incrementado debido al impacto perjudicial sobre la salud y el medio ambiente ocasionado por los sistemas de combustión convencionales. En este contexto, la comunidad científica ha ido centrando cada vez más sus esfuerzos en el estudio de la combustión turbulenta y la generación de emisiones contaminantes como las partículas de hollín. Con los recientes avances en lo que respecta a potencia de cálculo, las simulaciones de alta fidelidad emergen como una valiosa alternativa para reproducir y analizar estos fenómenos. En concreto, las simulaciones basadas en el modelado de la turbulencia LES son consideradas como una de las herramientas numéricas más prometedoras a la hora de profundizar en la comprensión sobre los complejos procesos dinámicos que caracterizan el flujo reactivo turbulento y predecir emisiones de hollín en aplicaciones aeronáuticas. En el presente trabajo, se estudia y analiza la combustión turbulenta y producción de hollín en aplicaciones de turbina de gas mediante LES de alta fidelidad. El modelado de la combustión se aborda a través de un método flexible de química tabulada basado en el concepto flamelet, el cual es capaz de representar fenómenos químicos complejos con un coste computacional asequible. Además, se emplea una aproximación Euleriana-Lagrangiana para la descripción de la fase gaseosa y las gotas, de forma que se represente correctamente el flujo reactivo multifásico. Para la predicción de hollín en simulaciones computacionalmente eficientes, se emplea un novedoso enfoque de modelado basada en el método seccional y acoplada al modelo de combustión de química tabulada. Esta estrategia de modelado numérica es utilizada en este trabajo para analizar el proceso de combustión y evaluar sus capacidades para predecir hollín y las características de la llama en quemadores de turbina de gas representativos. En primer lugar, se estudia la combustión de flujo bifásico en una llama atmosférica sin torbellinador con inyección líquida de combustible. Este quemador presenta una estructura doble del frente reactivo y las simulaciones numéricas son capaces de capturar adecuadamente los fenómenos de extinción local que tienen lugar en la zona interna de la llama debido a la interacción de las gotas y la turbulencia con el frente reactivo. Posteriormente, se investiga la combustión y producción de hollín en un quemador presurizado con torbellinador que incluye aire secundario de dilución en el interior de la cámara de combustión. La validación del flujo reactivo y hollín se lleva a cabo tanto en la configuración del quemador con aire secundario como sin el mismo, mostrando unas excelentes capacidades predictivas en ambos casos. La presente estrategia de modelado reproduce de forma precisa el complejo patrón de flujo, la estructura de la llama y la dinámica de generación de hollín, además de que es capaz de proporcionar diferentes distribuciones de tamaño de partícula dependiendo de las variaciones en los procesos de formación y oxidación del hollín. En resumen, los diferentes casos prácticos estudiados permiten consolidar y validar la metodología computacional seguida en la presente tesis. La estrategia de modelado basada en química tabulada propuesta demuestra ser lo suficientemente válida y adecuada para reproducir los complejos fenómenos de la combustión y la formación de hollín, en vista de la consistencia del análisis, las precisas predicciones y la concordancia satisfactoria con las medidas experimentales., [CA] En els últims anys, l'interés pel desenvolupament de motors d'aviació nets i eficients s'ha incrementat a causa de l'impacte perjudicial sobre la salut i el medi ambient ocasionat pels sistemes de combustió convencionals. En aquest context, la comunitat científica ha anat centrant cada vegada més els seus esforços en l'estudi de la combustió turbulenta i la generació d'emissions contaminants com les partícules de sutge. Amb els recents avanços pel que fa a potència de càlcul, les simulacions d'alta fidelitat emergeixen com una valuosa alternativa per a reproduir i analitzar aquests fenòmens. En concret, les simulacions basades en el modelatge de la turbulència LES són considerades com una de les eines numèriques més prometedores a l'hora d'aprofundir en la comprensió sobre els complexos processos dinàmics que caracteritzen el flux reactiu turbulent i predir emissions de sutge en aplicacions aeronàutiques. En el present treball, s'estudia i analitza la combustió turbulenta i la producció de sutge en aplicacions de turbina de gas mitjançant LES d'alta fidelitat. El modelatge de la combustió s'aborda a través d'un mètode flexible de química tabulada basat en el concepte flamelet, el qual és capaç de representar fenòmens químics complexos amb un cost computacional assequible. A més, s'empra una aproximació Euleriana-Lagrangiana per a la descripció de la fase gasosa i les gotes, de manera que es represente correctament el flux reactiu multifàsic. Per a la predicció de sutge en simulacions computacionalment eficients, s'empra un nou plantejament de modelatge basat en el mètode seccional i acoblat al model de combustió de química tabulada. Aquesta estratègia de modelatge numèrica és utilitzada en aquest treball per a analitzar el procés de combustió en cremadors de turbina de gas representatius, i avaluar les seues capacitats per a predir sutge i les característiques de la flama. En primer lloc, s'estudia la combustió de flux bifàsic en una flama atmosfèrica sense remolinador amb injecció líquida de combustible. Aquest cremador presenta una estructura doble del front reactiu i les simulacions numèriques són capaces de capturar adequadament els fenòmens d'extinció local que tenen lloc en la zona interna de la flama a causa de la interacció de les gotes i la turbulència amb el front reactiu. Posteriorment, s'investiga la combustió i producció de sutge en un cremador pressuritzat amb remolinador que inclou aire secundari de dilució a l'interior de la cambra de combustió. La validació del flux reactiu i sutge es duu a terme tant en la configuració del cremador amb aire secundari com sense aquest, mostrant unes estupendes capacitats predictives en tots dos casos. La present estratègia de modelatge reprodueix de manera precisa el complex patró de flux, l'estructura de la flama i la dinàmica de generació de sutge, a més de que és capaç de proporcionar diferents distribucions de grandària de partícula depenent de les variacions en els processos de formació i oxidació del sutge. En resum, els diferents casos pràctics estudiats permeten consolidar i validar la metodologia computacional seguida en la present tesi. L'estratègia de modelatge basada en química tabulada proposada demostra ser prou vàlida i adequada per a reproduir els complexos fenòmens de la combustió i la formació de sutge, en vista de la consistència de l'anàlisi, les precises prediccions i la concordança satisfactòria amb les mesures experimentals., [EN] In recent years, interest in the development of efficient and clean aviation powerplants has increased due to the detrimental impact on health and the environment caused by conventional combustion systems. In this context, the research community has increasingly focused its efforts on the study of turbulent combustion and the generation of pollutant emissions such as soot particulates. With recent advances in computational power, high-fidelity simulations emerge as a valuable alternative to reproduce and analyze these phenomena. Specifically, Large Eddy Simulations (LES) are considered as one of the most promising numerical tools to provide further insight into the complex dynamic processes that characterize reactive turbulent flows and predict soot emissions in aeronautical applications. In the present work, turbulent combustion and soot production is studied and analyzed in gas turbine engine applications by means of high-fidelity LES. Combustion modelling is addressed by a flexible tabulated chemistry method based on the flamelet concept, which is able to represent complex chemical phenomena with an affordable computational cost. In addition, an Eulerian- Lagrangian description is employed for the gas phase and droplets in order to correctly represent the multiphase flow in spray flames. A recently developed approach based on the sectional method and coupled to the tabulated chemistry framework is considered for soot prediction in computationally efficient simulations. This numerical modelling framework is used in this work to analyze the combustion process and evaluate its capabilities to predict soot and flame characteristics in representative gas turbine burners. First, an atmospheric non-swirled spray flame is studied in terms of two-phase flow combustion. This burner shows a double reaction front structure and local extinction occurs in the inner layer due to both droplet-flame and turbulence-flame interactions, which is properly characterized by LES. Subsequently, combustion and soot production is investigated in a pressurized swirled model combustor which includes secondary dilution jets inside the combustion chamber. The assessment of the reacting flow field and soot is addressed for burner configurations with and without secondary air, showing excellent predictive capabilities in both cases. The present modelling approach accurately reproduce the complex swirled flow field, flame structure and soot dynamics and is able to provide different particle size distributions depending on the variations of the soot formation and oxidation processes. In summary, the different practical cases studied allow to consolidate and validate the computational methodology followed in the present thesis. The proposed tabulated modelling strategy is sufficiently valid and suitable for reproducing complex combustion and soot formation phenomena, in view of the consistency of the analysis, the accurate predictions and the satisfactory agreement with the experimental measurements., El desarrollo de la presente tesis ha sido posible gracias a una ayuda para la Formación de Profesorado Universitario (FPU 18/03065) perteneciente al Subprograma Estatal de Formación del Ministerio de Ciencia, Innovación y Universidades de España. Además, el trabajo desarrollado está enmarcado en el proyecto ESTiMatE (Emissions SooT ModEl), que ha sido financiado por el consorcio Clean Sky 2 bajo el programa de investigación e innovación Horizonte 2020 de la Unión Europea (acuerdo No. 821418). Las actividades de simulación numérica han sido posibles gracias a la Red Española de Supercomputación y al Centro de Supercomputación de Barcelona por los recursos computacionales proporcionados en MareNostrum, además del grupo PRACE por conceder el acceso a HAWK (GCS, HLRS, Alemania) a través del proyecto SootAero.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Development of the conditional moment closure with a multi-code approach in the frame of Large Eddy Simulations

  • Pérez Sánchez, Eduardo Javier|||0000-0002-5056-415X
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Houzeaux, Guillaume|||0000-0002-2592-1426
The Conditional Moment Closure (CMC), devised for turbulent combustion modelling, was implemented in the multiphysics code Alya, based on the Finite Element Method (FEM), in the frame of Large Eddy Simulations (LES) for unstructured meshes. A multi-code approach has been developed to run separately the transport equations for non-reacting variables (CFD) and the conditioned quantities (CMC) in two different meshes. The fundamental aspects of the algorithm are discussed while a new strategy for the interpolation between CFD and CMC meshes is described. The Cambridge swirling burner is analysed and simulations results are compared to measurements., The research leading to these results has received funding from the Clean Sky 2 Joint Undertaking under the European Union’s Horizon 2020 research and innovation programme under the ESTiMatE project, grant agreement No 821418., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

LES of a pressurized sooting aero-engine model burner using a computationally efficient discrete sectional method coupled to tabulated chemistry

  • García Oliver, José María
  • Pastor, José Manuel
  • Olmeda, I.
  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • van Oijen, Jeroen
This work is focused on the modeling and analysis of soot formation and oxidation in the pressurized ethylene-based model burner investigated at DLR. This burner features a dual swirler configuration for the primary air supply and includes secondary dilution jets inside the combustion chamber, showing reacting flow characteristics representative of the RQL combustor technology. Large-eddy simulations (LES) of the DLR burner are conduced here to assess a coupling approach between flamelet generated manifold (FGM) chemistry and discrete sectional method (DSM) based soot model with clustering method. First, a validation of the numerical results is conducted for the gas velocity and temperature fields, and good agreement is obtained for both mean and fluctuating quantities. The Soot Volume Fraction (SVF) computed from LES shows a satisfactory agreement with the experimental data in both SVF distribution and magnitude. The analysis also includes a numerical investigation of the soot production and the Particle Size Distributions (PSD). Finally, the configuration without secondary air is evaluated and an accurate prediction of the SVF field is also obtained. In this case, the absence of dilution air strongly influences the central region of the combustion chamber, and soot distribution and PSD are mainly affected by transport and dilution, not oxidation. It is finally concluded the proposed modeling framework is capable of predicting the soot field and particle size distributions inside the combustor for both operating conditions., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020- 118387RB-C33 and SAFLOW TED2021-131618B-C21 and TED2021-131618B-C22 projects from the Ministerio de Ciencia e Innovación, Spain . We acknowledge PRACE for awarding us access through the SootAero project to HAWK at GCS@HLRS, Germany. The authors thankfully acknowledge the computer resources at LaPalma and MareNostrum, and the technical support provided by Instituto de Astrofísica de Canarias (IM-2021-2-0027) and Barcelona Supercomputing Center (IM-2021-3-0016). I. Olmeda acknowledges the Ayuda de Formación de Profesorado Universitario (FPU 18/03065) from the Subprograma de Estatal de Formación del Ministerio de Ciencia, Innovación Universidades of Spain. DM acknowledges the grant Ayudas para contratos Ramón Cajal (RYC) 2021: RYC2021-034654-I from Ministerio de Ciencia e Innovación., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Evaporation of volatile droplets subjected to flame-like conditions

  • Both, Ambrus|||0000-0002-5267-204X
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
This work assesses Lagrangian droplet evaporation models frequently used in spray combustion simulations, with the purpose of identifying the influence of modeling decisions on the single droplet behavior. Besides more simplistic models, the evaluated strategies include a simple method to incorporate Stefan flow effects in the heat transfer (Bird’s correction), a method to consider the interaction of Stefan flow with the heat and mass transfer films (Abramzon–Sirignano model), and a method to incorporate non-equilibrium thermodynamics (Langmuir–Knudsen model). The importance of each phenomena is quantified analytically and numerically under various conditions. Evaporation models ignoring Stefan flow are found to be invalid under the studied conditions. The Langmuir–Knudsen model is also deemed inadequate for high temperature evaporation, while Bird’s correction and the Abramzon–Sirignano model are identified as the most relevant for numerical studies of spray combustion systems. Latter is the most elaborate model studied here, as it considers Reynolds number effects beyond the empirical correlation of Ranz and Marshall derived for low-transfer rates. Thus, the Abramzon–Sirignano model is identified as the state of the art alternative in the scope of this study. }, We acknowledge the funding received through the ESTiMatE project from the Clean Sky 2 Joint Undertaking under the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 821418 and through the Spanish Ministry of Economy and Competitiveness in the frame of the AHEAD project (PID2020-118387RB-C33)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A computationally efficient approach for soot modeling with discrete sectional method and FGM chemistry

  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • van Oijen, Jeroen
A novel approach for the prediction of soot formation in combustion simulations within the framework of discrete sectional method (DSM) based univariate soot model and Flamelet Generated Manifold (FGM) chemistry, referred to as FGM-CDSM, is proposed in this study. The FGM-CDSM considers the clustering of soot sections derived from the original soot particle size distribution function (PSDF) to minimize the computational cost. Unlike conventional DSM, in FGM-CDSM, governing equations for soot mass fractions are solved for the clusters, by using a pre-computed lookup table with tabulated soot source terms from the flamelet manifold, while the original soot PSDF is re-constructed in a post-processing stage. The flamelets employed for the manifold are computed with detailed chemistry and the complete sectional soot model. A comparative assessment of FGM-CDSM is conducted in laminar diffusion flames for its accuracy and computational performance against the detailed kinetics-based classical sectional model. Numerical results reveal that the FGM-CDSM can favorably reproduce the global soot quantities and capture their dynamic response predicted by detailed kinetics with a good qualitative agreement. Furthermore, compared to detailed kinetics, FGM-CDSM is shown to substantially reduce the computational cost of the complete reacting flow simulation with soot particle transport. Primarily, the use of FGM reduces the overall calculation by about two orders of magnitude compared to detailed kinetics, which is advanced further with the clustering of sections at a low memory footprint. Therefore, the present work demonstrates the promising capabilities of FGM-CDSM in the context of computationally efficient soot calculations and provides an excellent framework for extending its application to the simulations of turbulent sooting flames., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement no. 821418. The authors gratefully acknowledge the Red Española de Supercomputación (RES) for computational resources.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Assessment of tabulated chemistry models for the les of a model aero-engine combustor

  • Both, Ambrus|||0000-0002-5267-204X
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
Tabulated chemistry methods present a compromise between computational cost and the ability to capture complex combustion physics in high-fidelity numerical simulations. The application of such models entails a number of modeling decisions, that may affect the simulation results significantly, especially in partially premixed combustion, where the assumption of the existence of underlying premixed or non-premixed flamelet structures is arguable. In this work, different classical tabulation strategies are assessed in terms of their ability to predict the lift-off induced by localized extinction in a model aero-engine combustion chamber: the Cambridge swirl spray flame. The lift-off dynamics of the stable n-heptane spray flame are compared using: i) premixed flamelets, ii) stable and unstable counterflow diffusion flamelets, iii) stable and unsteady extinguishing counterflow diffusion flamelets, iv) unsteady extinguishing and reigniting counterflow diffusion flamelets at a given strain rate. The extinction and reignition events associated to the lift-off are validated against OH-PLIF measurements, and the temporal evolution of the lift-off and reattachment is analyzed., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the CoEC project, grant agreement No. 952181 and the Clean Sky 2 Joint Undertaking ESTiMatE project under grant agreement No 821418., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

LES investigation of soot formation in a turbulent non-premixed jet flame with sectional method and FGM chemistry

  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • Both, Ambrus|||0000-0002-5267-204X
  • van Oijen, Jeroen
This study proposes a detailed soot modeling framework for large-eddy simulation (LES) to accurately predict soot formation and particle size distributions (PSD) in turbulent reacting flows. The framework incorporates Flamelet Generated Manifold (FGM) chemistry and a soot model based on the discrete sectional method (DSM) to predict both qualitative and quantitative sooting behavior while keeping the computational cost affordable. Two elementary modeling strategies are considered in the LES formalism for describing soot formation rates. These strategies rely on an a-priori tabulation of soot formation rates and their run-time computation. The LES formalism is applied to the simulations of a well-characterized, non-premixed, turbulent jet flame. A comparative analysis of strategies employed for filtered soot source term treatment is conducted to investigate their impact on the prediction of soot quantities and the evolution of soot PSDs. The LES results for the gas phase and soot phase are compared against the available experimental data. A good prediction of soot evolution is achieved with the two methodologies. The tabulation of soot formation rates leads to a significant reduction in computational cost compared to the model based on their explicit runtime computation. The LES results reveal that the modeling of filtered soot source terms has a significant impact on the quantitative prediction of soot formation. The possible reasons for the observed differences in the soot prediction are discussed. The run-time computation-based model provides a more consistent treatment of the non-linear interactions between the gas and soot phases in soot source terms compared to the tabulated soot chemistry approach. On the other hand, the tabulated soot chemistry model is an interesting and efficient modeling approach for predicting soot formation in turbulent conditions. Overall, both approaches have their strengths and limitations, and the choice of approach may depend on the specific needs of the application., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C21 projects from the Ministerio de Ciencia e Innovación. DM acknowledges the grant from the Ministerio de Ciencia e Innovación, Ayudas para contratos Ramón y Cajal (RYC) 2021: RYC2021-034654-I. The authors gratefully acknowledge the Partnership for Advanced Computing in Europe (PRACE) grant Soot Aero for computational resources and technical support in the numerical simulations., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Development of the conditional moment closure with a multi-code approach in the frame of Large Eddy Simulations

  • Pérez Sánchez, Eduardo Javier
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol
  • Houzeaux, Guillaume
The Conditional Moment Closure (CMC), devised for turbulent combustion modelling, was implemented in the multiphysics code Alya, based on the Finite Element Method (FEM), in the frame of Large Eddy Simulations (LES) for unstructured meshes. A multi-code approach has been developed to run separately the transport equations for non-reacting variables (CFD) and the conditioned quantities (CMC) in two different meshes. The fundamental aspects of the algorithm are discussed while a new strategy for the interpolation between CFD and CMC meshes is described. The Cambridge swirling burner is analysed and simulations results are compared to measurements., The research leading to these results has received funding from the Clean Sky 2 Joint Undertaking under the European Union’s Horizon 2020 research and innovation programme under the ESTiMatE project, grant agreement No 821418., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

LES investigation of soot formation in a turbulent non-premixed jet flame with sectional method and FGM chemistry

  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • Both, Ambrus
  • van Oijen, Jeroen
This study proposes a detailed soot modeling framework for large-eddy simulation (LES) to accurately predict soot formation and particle size distributions (PSD) in turbulent reacting flows. The framework incorporates Flamelet Generated Manifold (FGM) chemistry and a soot model based on the discrete sectional method (DSM) to predict both qualitative and quantitative sooting behavior while keeping the computational cost affordable. Two elementary modeling strategies are considered in the LES formalism for describing soot formation rates. These strategies rely on an a-priori tabulation of soot formation rates and their run-time computation. The LES formalism is applied to the simulations of a well-characterized, non-premixed, turbulent jet flame. A comparative analysis of strategies employed for filtered soot source term treatment is conducted to investigate their impact on the prediction of soot quantities and the evolution of soot PSDs. The LES results for the gas phase and soot phase are compared against the available experimental data. A good prediction of soot evolution is achieved with the two methodologies. The tabulation of soot formation rates leads to a significant reduction in computational cost compared to the model based on their explicit runtime computation. The LES results reveal that the modeling of filtered soot source terms has a significant impact on the quantitative prediction of soot formation. The possible reasons for the observed differences in the soot prediction are discussed. The run-time computation-based model provides a more consistent treatment of the non-linear interactions between the gas and soot phases in soot source terms compared to the tabulated soot chemistry approach. On the other hand, the tabulated soot chemistry model is an interesting and efficient modeling approach for predicting soot formation in turbulent conditions. Overall, both approaches have their strengths and limitations, and the choice of approach may depend on the specific needs of the application., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C21 projects from the Ministerio de Ciencia e Innovación. DM acknowledges the grant from the Ministerio de Ciencia e Innovación, Ayudas para contratos Ramón y Cajal (RYC) 2021: RYC2021-034654-I. The authors gratefully acknowledge the Partnership for Advanced Computing in Europe (PRACE) grant Soot Aero for computational resources and technical support in the numerical simulations., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Evaporation of volatile droplets subjected to flame-like conditions

  • Both, Ambrus
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol
This work assesses Lagrangian droplet evaporation models frequently used in spray combustion simulations, with the purpose of identifying the influence of modeling decisions on the single droplet behavior. Besides more simplistic models, the evaluated strategies include a simple method to incorporate Stefan flow effects in the heat transfer (Bird’s correction), a method to consider the interaction of Stefan flow with the heat and mass transfer films (Abramzon–Sirignano model), and a method to incorporate non-equilibrium thermodynamics (Langmuir–Knudsen model). The importance of each phenomena is quantified analytically and numerically under various conditions. Evaporation models ignoring Stefan flow are found to be invalid under the studied conditions. The Langmuir–Knudsen model is also deemed inadequate for high temperature evaporation, while Bird’s correction and the Abramzon–Sirignano model are identified as the most relevant for numerical studies of spray combustion systems. Latter is the most elaborate model studied here, as it considers Reynolds number effects beyond the empirical correlation of Ranz and Marshall derived for low-transfer rates. Thus, the Abramzon–Sirignano model is identified as the state of the art alternative in the scope of this study. }, We acknowledge the funding received through the ESTiMatE project from the Clean Sky 2 Joint Undertaking under the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 821418 and through the Spanish Ministry of Economy and Competitiveness in the frame of the AHEAD project (PID2020-118387RB-C33)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Assessment of tabulated chemistry models for the les of a model aero-engine combustor

  • Both, Ambrus
  • Mira Martínez, Daniel
  • Lehmkuhl Barba, Oriol
Tabulated chemistry methods present a compromise between computational cost and the ability to capture complex combustion physics in high-fidelity numerical simulations. The application of such models entails a number of modeling decisions, that may affect the simulation results significantly, especially in partially premixed combustion, where the assumption of the existence of underlying premixed or non-premixed flamelet structures is arguable. In this work, different classical tabulation strategies are assessed in terms of their ability to predict the lift-off induced by localized extinction in a model aero-engine combustion chamber: the Cambridge swirl spray flame. The lift-off dynamics of the stable n-heptane spray flame are compared using: i) premixed flamelets, ii) stable and unstable counterflow diffusion flamelets, iii) stable and unsteady extinguishing counterflow diffusion flamelets, iv) unsteady extinguishing and reigniting counterflow diffusion flamelets at a given strain rate. The extinction and reignition events associated to the lift-off are validated against OH-PLIF measurements, and the temporal evolution of the lift-off and reattachment is analyzed., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the CoEC project, grant agreement No. 952181 and the Clean Sky 2 Joint Undertaking ESTiMatE project under grant agreement No 821418., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

LES of a pressurized sooting aero-engine model burner using a computationally efficient discrete sectional method coupled to tabulated chemistry

  • García Oliver, José María
  • Pastor, José Manuel
  • Olmeda, I.
  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • van Oijen, Jeroen
This work is focused on the modeling and analysis of soot formation and oxidation in the pressurized ethylene-based model burner investigated at DLR. This burner features a dual swirler configuration for the primary air supply and includes secondary dilution jets inside the combustion chamber, showing reacting flow characteristics representative of the RQL combustor technology. Large-eddy simulations (LES) of the DLR burner are conduced here to assess a coupling approach between flamelet generated manifold (FGM) chemistry and discrete sectional method (DSM) based soot model with clustering method. First, a validation of the numerical results is conducted for the gas velocity and temperature fields, and good agreement is obtained for both mean and fluctuating quantities. The Soot Volume Fraction (SVF) computed from LES shows a satisfactory agreement with the experimental data in both SVF distribution and magnitude. The analysis also includes a numerical investigation of the soot production and the Particle Size Distributions (PSD). Finally, the configuration without secondary air is evaluated and an accurate prediction of the SVF field is also obtained. In this case, the absence of dilution air strongly influences the central region of the combustion chamber, and soot distribution and PSD are mainly affected by transport and dilution, not oxidation. It is finally concluded the proposed modeling framework is capable of predicting the soot field and particle size distributions inside the combustor for both operating conditions., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020- 118387RB-C33 and SAFLOW TED2021-131618B-C21 and TED2021-131618B-C22 projects from the Ministerio de Ciencia e Innovación, Spain . We acknowledge PRACE for awarding us access through the SootAero project to HAWK at GCS@HLRS, Germany. The authors thankfully acknowledge the computer resources at LaPalma and MareNostrum, and the technical support provided by Instituto de Astrofísica de Canarias (IM-2021-2-0027) and Barcelona Supercomputing Center (IM-2021-3-0016). I. Olmeda acknowledges the Ayuda de Formación de Profesorado Universitario (FPU 18/03065) from the Subprograma de Estatal de Formación del Ministerio de Ciencia, Innovación Universidades of Spain. DM acknowledges the grant Ayudas para contratos Ramón Cajal (RYC) 2021: RYC2021-034654-I from Ministerio de Ciencia e Innovación., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A computationally efficient approach for soot modeling with discrete sectional method and FGM chemistry

  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • van Oijen, Jeroen
A novel approach for the prediction of soot formation in combustion simulations within the framework of discrete sectional method (DSM) based univariate soot model and Flamelet Generated Manifold (FGM) chemistry, referred to as FGM-CDSM, is proposed in this study. The FGM-CDSM considers the clustering of soot sections derived from the original soot particle size distribution function (PSDF) to minimize the computational cost. Unlike conventional DSM, in FGM-CDSM, governing equations for soot mass fractions are solved for the clusters, by using a pre-computed lookup table with tabulated soot source terms from the flamelet manifold, while the original soot PSDF is re-constructed in a post-processing stage. The flamelets employed for the manifold are computed with detailed chemistry and the complete sectional soot model. A comparative assessment of FGM-CDSM is conducted in laminar diffusion flames for its accuracy and computational performance against the detailed kinetics-based classical sectional model. Numerical results reveal that the FGM-CDSM can favorably reproduce the global soot quantities and capture their dynamic response predicted by detailed kinetics with a good qualitative agreement. Furthermore, compared to detailed kinetics, FGM-CDSM is shown to substantially reduce the computational cost of the complete reacting flow simulation with soot particle transport. Primarily, the use of FGM reduces the overall calculation by about two orders of magnitude compared to detailed kinetics, which is advanced further with the clustering of sections at a low memory footprint. Therefore, the present work demonstrates the promising capabilities of FGM-CDSM in the context of computationally efficient soot calculations and provides an excellent framework for extending its application to the simulations of turbulent sooting flames., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement no. 821418. The authors gratefully acknowledge the Red Española de Supercomputación (RES) for computational resources., Postprint (published version)