Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Study of long term fouling on cross flow ultrafiltration

  • Cantó Polo, Rocío Águeda
  • Vincent Vela, Maria Cinta|||0000-0001-8493-0165
  • Cuartas Uribe, Beatriz Elena|||0000-0003-2835-900X
  • Alvarez Blanco, Silvia
  • Lora-García, Jaime|||0000-0003-1699-5404
Ultrafiltration (UF) is a membrane technique whereby water and microsolutes are separated from macromolecules. It has several applications in wastewater treatment and it is also widely used in chemical and food industries. The main disadvantage of UF is membrane fouling, which causes a decline in permeate flux with time. As permeate flux decline highly increases the operation costs, the time-dependence of permeate flux has been studied in many occasions. Most of these studies use protein aqueous solutions (bovine serum albumin, hemoglobin, cheese whey among others) as feed. However, as proteins are charged molecules, they interact with the membrane and their interactions are influenced by the pH of the solution, so the models applied to these kinds of feed solutions should include membrane-solute interaction. When using polythylene glycol (PEG) these interactions may not be considered and the models are simplified., The authors of this work wish to acknowledge the financial support of the Universitat Politècnica de València throught the project "Primeros proyectos de Investigación: Programa de Apoyo a la Investigación y Desarrollo PAID-06-10" and the Spanish Ministry of Science and Innovation throught the project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Theoretical model of a multi-layered polymer coated steel-strip ironing process using a neural network

  • Sellés, M.A.|||0000-0002-0784-5757
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Pérez Bernabeu, Elena|||0000-0002-9221-7623
  • Reig-Pérez, Miguel Jorge|||0000-0003-0226-1194
  • Segui Llinares, Vicente Jesús|||0000-0002-4043-2866
  • Schmid, S. R.
An alternative to the traditional can manufacturing process is to use plastic laminated rolled steels as base stocks. This material consist of pre-heated steel coils that are sandwiched between one or two sheets of polymer. The heated sheets are then immediately quenched, which yields a strong bond between the layers. Such polymer-coated steels were investigated by Jaworski [1,2] and Sellés [3], and found to be suitable for ironing with carefully controlled conditions. A novel multi-layer polymer coated steel has been developed for container applications. This material presents an interesting extension to previous research on polymer laminated steel in ironing, and offers several advantages over the previous material (Sellés [3]). This document shows a modelization for the ironing process (the most crucial step in can manufacturing) done by using a neural network. © (2012) Trans Tech Publications., This work was supported by the “Universitat Politècnica de València” [grant number PAID-06-10-003-305]