Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 93
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mechanical and Thermal Properties of Polyvinyl Chloride Plasticized with Natural Fatty Acid Esters

  • Fenollar, Octavio|||0000-0003-4323-7414
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Balart, Rafael|||0000-0001-5670-7126
From an industrial point of view, the use of new nontoxic and biodegradable plasticizers coming from natural resources is an interesting alternative to traditional plasticizers based on phthalates. In this study, two types of epoxidized fatty acids esters (EFAE) with different molecular weights have been used in order to produce flexible PVC with low toxicity. Different amounts of EFAE 201 and 401 have been considered in this study. Mechanical and thermal properties have been determined and morphology of fracture surface has been studied by scanning electron microscopy., This work was supported by the "Ministerio de Ciencia e Innovacion" [Grant number IPT-310000-2010-37] and the "Universitat Politecnica de Valencia" [Grant number PAID 06-10 Ref: 003-300].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A new well-balanced non-oscillatory central scheme for the shallow water equations on rectangular meshes

  • Capilla Romá, Maria Teresa|||0000-0002-8764-5754
  • Balaguer-Beser, Ángel|||0000-0003-0039-2641
This paper is concerned with the development of high-order well-balanced central schemes to solve the shallow water equations in two spatial dimensions. A Runge Kutta scheme is applied for time discretization. A Gaussian quadrature rule is used to evaluate time integrals and a three-degree polynomial which calculates point-values or flux values. A new procedure has been defined to evaluate the flux integrals and to approach the 2D source term integrals in order to verify the exact C-property, using the water surface elevation instead of the water depth as a variable. Numerical experiments have confirmed the high-resolution properties of our numerical scheme in 2D test problems., This work was partially funded by the "Programa de Apoyo a la Investigacion y Desarrollo" (PAID-06-10) and (PAID-05-12) of the Universidad Politecnica de Valencia. Angel Balaguer-Beser thanks the support of the Spanish Ministry of Education and Science in the framework of the Projects CGL2009-14220-C02-01 and CGL2010-19591. The authors express their gratitude to the anonymous reviewers for their helpful comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of ultrasound preinsonification of solutions on the structuring of dried microdrop trails

  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Makov, Yu. N.
The effect of ultrasound preinsonification of a solution on the kinetics and end result of the drying (evaporation) of a microdrop of this solution on a substrate was examined. The results of experiments with salt solution (NaCl) of albumin drops and of an alkaline (NaOH) solution drops are presented. It is shown that the morphology of the dried microdrop residual trail of a preinsonified solution differs noticeably compared to the microdrop trail of a solution that has not been insonified. The main reasons for the revealed effects are analyzed. © 2011 Pleiades Publishing, Ltd., The work was supported in part by the Russian Foundation for Basic Research and also by the Spanish Government, under the Project FIS2008-06024-C03-03 and Programa de Apoyo a la Investigacion y Desarrollo of the Universitat Politecnica de Valencia PAID-06-10-002-295.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

What types of firms acquire knowledge intensive services and from which suppliers?

  • García Quevedo, José Andrés
  • Montolio, Daniel
  • Mas Verdú, Francisco|||0000-0002-0902-9462
[EN] Knowledge intensive services and, in particular, R&D services contribute significantly to innovation in firms. The objective of this paper is to find out which characteristics of firms explain the acquisition of R&D services and to analyse whether there are ifferences depending on the typology of the supplier (universities, technology centres and consulting firms). Three main conclusions emerge from the econometric estimations carried out with information from a survey of innovative firms in the region of Valencia in Spain. First, the results show that firm size and age matter in the decision to buy R&D services. Second, our results are consistent with the relevance that the literature gives to human capital in absorbing external knowledge. Third, innovation policy has a significant influence on the decision to acquire R&D services, particularly from universities and technology centre, The authors thank the Alto Consejo Consultivo en I+D de la Generalitat Valenciana and IMPIVA for facilitating access to the survey and, particularly, Manuel López Estornell and Emilio Cubel for preparing the questionnaire and the sample. José García-Quevedo gratefully acknowledges support from grants ECO2010-16934 and 20099SGR102. Francisco MasVerdú gratefully acknowledges support from grants ECO2008-04708/ECON, ECO2010-16934, PAID 06-10/2392 and GV/2011/049. Daniel Montolio acknowledges support from grant 2009SGR102.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chemical and electrochemical study of fabrics coated with reduced graphene oxide

  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
  • Fernández Sáez, Javier
  • Del Río García, Ana Isabel
Polyester fabrics coated with reduced graphene oxide (RGO) have been obtained and later characterized by means of chemical and electrochemical techniques. X-ray photoelectron spectroscopy showed a decrease of the oxygen content as well as an increase of the sp2 fraction after chemical reduction of graphene oxide (GO). The electrical conductivity was measured by electrochemical impedance spectroscopy (EIS) and showed a decrease of 5 orders of magnitude in the resistance (¿) when GO was reduced to RGO. The phase angle also changed from 90° for PES-GO (capacitative behavior) to 0° for RGO coated fabrics (resistive behavior). In general an increase in the number of RGO layers produced an increase of the conductivity of the fabrics. EIS measurements in metal/sample/electrolyte configuration showed better electrocatalytic properties and faster diffusion rate for RGO specimens. Scanning electrochemical microscopy was employed to test the electroactivity of the different fabrics obtained. The sample coated with GO was not conductive since negative feedback was obtained. When GO was reduced to RGO the sample behaved like a conducting material since positive feedback was obtained. Approach curves indicated that the redox mediator had influence on the electrochemical response. The Fe(CN)63¿/4¿ redox mediator produced a higher electrochemical response than Ru(NH3)63+/2+ one., Authors thank to the Spanish Ministerio de Ciencia e Innovacion (contract CTM2011-23583) and Universitat Politecnica de Valencia (Vicerrectorado de Investigacion PAID-06-10 contract 003-233) for the financial support. J. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for the FPI fellowship. A.I. del Rio is grateful to the Spanish Ministerio de Ciencia y Tecnologia for the FPI fellowship. J.C. Galvan is gratefully acknowledged for help with EIS measurements and data analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

An Integrated Framework for Multiprocessor, Multimoded Real-Time Applications

  • Sáez Barona, Sergio|||0000-0001-8970-6808
  • Real Sáez, Jorge Vicente|||0000-0001-7636-6672
  • Crespo, Alfons|||0000-0002-6606-7406
In this paper we propose an approach for building real-time systems under a combination of requirements: specification and handling of operating modes and mode changes; implementation on top of a multiprocessor platform; integration of both aspects within a common framework; and connection with schedulability analysis procedures. The proposed approach uses finite state machines to describe operating modes and transitions, and a framework of real-time utilities that implements the required behaviour in Ada 2012. Automatic code generation plays an important role: the system is derived from the functional and timing specification, and implemented according to the abstractions provided by the framework. Response time analysis enables assessing the schedulability of the different operating modes and the transitions between modes., This work was partially supported by the Vicerrectorado de Investigación of the UPV (PAID-06-10-2397), Ministerio de Ciencia e Innovación (TIN2011-28567-C03- 03) and European Union (FP7-ICT-287702)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

BvCOLD1: A novel aquaporin from sugar beet (Beta vulgaris L.) involved in boron homeostasis and abiotic stress

  • Porcel, R.|||0000-0001-8068-741X
  • Serrano Salom, Ramón
  • Mulet, José Miguel|||0000-0002-9087-3838
  • Bustamante-González, Antonio Javier
  • Ros, Roc
[EN] In this report we have identified BvCOLD1, a novel aquaporin from sugar beet (Beta vulgaris) which is only conserved in the Chenopodioideae family. BvCOLD1 is expressed in all plant organs investigated and located in the endoplasmic reticulum. Transport experiments in yeast indicated that BvCOLD1 is able to transport glycerol and boron, the most limiting oligoelement for sugar beet cultivation. Overexpression of BvCOLD1 in Arabidopsis thaliana plants conferred tolerance to cold, to different abiotic stresses and the ability to grow under boron limiting conditions, therefore this novel aquaporin may be an important target to design new crops with enhanced boron homeostasis and abiotic stress tolerance., Ministerio de Economia y Competitividad, Grant/Award Number: BIO2016-77776-P; Secretaria de Estado de Investigacion, Desarrollo e Innovacion, Grant/Award Number: AGL2013-47886-R; Direccion General Investigacion Cientifica; MINECO, Grant/Award Numbers: BIO2014-61826 and BIO2016-77776-P; Universitat Politecnica de Valencia, Grant/Award Number: PAID-06-10-1496
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Pseudocomposition: a technique to design predictor-corrector methods for systems of nonlinear equations

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Vassileva, María P.
A new technique for designing iterative methods for solving nonlinear systems is presented. This procedure, called pseudocomposition, uses a known method as a predictor and the Gaussian quadrature as a corrector. The order of convergence of the resulting scheme depends, among other factors, on the order of the last two steps of the predictor. We also introduce a new iterative algorithm of order six, and apply the mentioned technique to generate a new method of order ten. Finally, some numerical test are shown. 2012 Elsevier Inc. All rights reserved., This research was supported by Ministerio de Ciencia y Tecnologia MTM2011-28636-C02-02 and by Vicerrectorado de Investigacion, Universitat Politecnica de Valencia PAID-06-2010-2285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Molecular characterization of the cucumber (Cucumis sativus L.) accessions held at the COMAV s genebank

  • Valcarcel Germes, José Vicente|||0000-0002-7843-703X
  • Pérez De Castro, Ana María|||0000-0002-4949-3323
  • Peiró Barber, Rosa Mª|||0000-0002-3009-2343
  • Díez Niclós, Mª José Teresa De Jesús
[EN] The cucumber (Cucumis sativus L.) is an important crop worldwide. In the present study, the molecular genetic diversity of 131 Spanish accessions was analyzed using 23 simple sequence repeat (SSRs). Eighteen of these SSRs were polymorphic; the mean number of alleles, mean observed heterozygosity and mean polymorphic information content were 3.2, 0.065 and 0.229, respectively. Seven SSRs showed a polymorphic information content (PIC) ranging from 0.31 to 0.44, therefore they were reasonably informative. Around 60% of the alleles showed a frequency higher than 0.05, and only one allele in the SSR31399 showed a frequency lower than 0.01. In addition, three accession-specific alleles were found. A high proportion of variation among accessions was obtained. In no case all plants of any accession showed the same genotype and only 18 of 131 Spanish accessions had at least two plants with the same genotype. A cluster analysis did not show any relation with morphological types or geographical area. Therefore, these results demonstrated that molecular diversity of the cucumber did not reflect its phenotypic variability. Finally, this study provided information for the rationalization of the cucumber collection of the COMAV. Morphological traits, origin and molecular data were taken into account to select 47 accessions, six belonging to `French¿ type, 15 to `Long¿ type, and 24 to `Short¿ type. Phenotypic and molecular variability contained in the complete collection was conserved in the selected accessions, Partially funded by the Generalitat Valenciana (project GV/2012/080).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Complex dynamics of derivative-free methods for nonlinear equations

  • Chicharro, Francisco I.|||0000-0001-9116-2870
  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Gutiérrez, José M.
The dynamical behavior of two iterative derivative-free schemes, Steffensen and M4 methods, is studied in case of quadratic and cubic polynomials. The parameter plane is analyzed for both procedures on quadratic polynomials. Different dynamical planes are showed when the mentioned methods are applied on particular cubic polynomials with real or complex coefficients. The property of immersion of the basins of attraction in all cases is analyzed. 2013 Elsevier Inc. All rights reserved., This research was supported by Ministerio de Ciencia y Tecnologia MTM2011-28636-C02-02 and by Vicerrectorado de Investigacion, Universitat Politecnica de Valencia PAID-06-2010-2285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Involvement of the exomer complex in the polarized transport of Ena1 required for Saccharomyces cerevisiae survival against toxic cations

  • Anton, C.
  • Zanolari, B.
  • Arcones, I.
  • Wang, C.
  • Spang, A.
  • Roncero, C.
  • Mulet, José Miguel|||0000-0002-9087-3838
[EN] Exomer is an adaptor complex required for the direct transport of a selected number of cargoes from the trans-Golgi network (TGN) to the plasma membrane in Saccharomyces cerevisiae However, exomer mutants are highly sensitive to increased concentrations of alkali metal cations, a situation that remains unexplained by the lack of transport of any known cargoes. Here we identify several HAL genes that act as multicopy suppressors of this sensitivity and are connected to the reduced function of the sodium ATPase Ena1. Furthermore, we find that Ena1 is dependent on exomer function. Even though Ena1 can reach the plasma membrane independently of exomer, polarized delivery of Ena1 to the bud requires functional exomer. Moreover, exomer is required for full induction of Ena1 expression after cationic stress by facilitating the plasma membrane recruitment of the molecular machinery involved in Rim101 processing and activation of the RIM101 pathway in response to stress. Both the defective localization and the reduced levels of Ena1 contribute to the sensitivity of exomer mutants to alkali metal cations. Our work thus expands the spectrum of exomer-dependent proteins and provides a link to a more general role of exomer in TGN organization., We acknowledge Emma Keck for English language revision. We also thank members of the Translucent group, J. Arino, J. Ramos, and L. Yenush, for many useful discussions throughout this work and especially L. Yenush for her generous gift of strains and reagents. The help of O. Vincent was essential for developing the work involving RIM101. We also thank R. Valle for her technical assistance at the CR Laboratory. M. Trautwein is acknowledged for data acquisition and discussions during the early stages of the project. C.A. is supported by a USAL predoctoral fellowship. Work at the Spang laboratory was supported by the University of Basel and the Swiss National Science Foundation (31003A-141207 and 310030B-163480). C.R. was supported by grant SA073U14 from the Regional Government of Castilla y Leon and by grant BFU2013-48582-C2-1-P from the CICYT/FEDER Spanish program. J.M.M. acknowledges the financial support from Universitat Politecnica de Valencia project PAID-06-10-1496.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Framework for Improving Planning-Scheduling Collaboration in Industrial Production Environment

  • Gómez-Gasquet, Pedro|||0000-0002-9184-6735
  • Lario Esteban, Francisco Cruz
  • Franco Pereyra, Rubén Darío
  • Anaya Fons, Víctor Alonso
[EN] The work presented in this paper highlights how a real scheduling problem can be considered as a process avoiding the traditional operation research-based approach. Understanding the scheduling problem as a dynamic, uncertain and continuous process, in order to reduce the gap between reality and academic models, new conceptual elements emerge. The framework includes methodologies, concepts, architecture, and algorithms, which are based on the idea of a multiagent system in which planning-scheduling relationship is the core proposal. From the framework a software platform has been developed and tested in real industry., This work has been carried out as part of the project “DPI2008-06788-C02-01 (PERMACASI)” funded by Ministerio de Ciencia e Innovación of the Spanish Government and as part of the project “PAID-06-10-2396 (NegoSol-MAS)” funded by Vicerrectorado de Investigación of Universidat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Double-template fabrication of three-dimensional porous nickel electrodes for hydrogen evolution reaction

  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Vázquez-Gómez, Lourdes
[EN] Three-dimensional (3D) porous nickel structures were fabricated via a double-template electrochemical deposition process. The construction of the foam structures was achieved by means of a hydrogen bubble dynamic template, prepared from Cu electrodeposition at high current densities. Subsequently, a Ni layer was electrodeposited on the Cu 3D template. During the nickel coating, the typical finger-like microstructure of the Cu foam becomes denser and changes to a cauliflower microstructure. The hydrogen evolution reaction (HER) on these macroporous Ni electrodes was evaluated in 30 wt.% KOH solution by means of polarization curves and electrochemical impedance spectroscopy (EIS). Results demonstrate greater apparent activity of the developed electrodes towards HER in comparison with commercial smooth Ni electrode. The 3D porous Ni electrocatalyst obtained from Cu templates synthesized at the lowest current density and the highest electrodeposition time yielded the best electrochemical activity for HER. © 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved., Isaac Herraiz-Cardona is grateful to the Ministerio de Educacion (Spain) for a postgraduate grant (Ref. AP2007-03737). This work was supported by Generalitat Valenciana (PROMETEO/2010/023) and Universidad Politecnica de Valencia (PAID-06-10-2227).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of the hydraulic cleaning efficiency as a function of the operating conditions in the ultrafiltration of BSA solutions

  • Corbatón Báguena, María José
  • Alvarez Blanco, Silvia
  • Vincent Vela, Maria Cinta|||0000-0001-8493-0165
This work was supported by the Spanish Ministry of Science and Innovation through the project CTM2010-20186 and by the Polytechnic University of Valencia under its program PAID.06-10
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparative study of PCL-HAp and PCL-bioglass composite scaffolds for bone tissue engineering

  • Ródenas Rochina, Joaquín|||0000-0001-5764-207X
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Lebourg, Myriam Annette Madeleine
The aim of this work is to compare the effect of hydroxyapatite (HAp) or bioglass (BG) nanoparticles in a polycaprolactone composite scaffold aimed to bone regeneration. To allow a comparison of the influence of both types of fillers, scaffolds made of PCL or composites containing up to 20 % by weight HAp or BG were obtained. Scaffolds showed acceptable mechanical properties for its use and high interconnected porosity apt for cellular colonization. To study the effect of the different materials on pre-osteoblast cells differentiation, samples with 5 % mineral reinforcement, were cultured for up to 28 days in osteogenic medium. Cells proliferated in all scaffolds. Nevertheless, differentiation levels for the selected markers were higher in pure PCL scaffolds than in the composites; inclusion of bioactive particles showed no positive effects on cell differentiation. In osteogenic culture conditions, the presence of bioactive particles is thus not necessary in order to observe good differentiation., JLGR acknowledges the support of the Spanish Ministry of Science and Education through project No. MAT2010-21611-C03-01 (including the FEDER financial support), and from Generalitat Valenciana, ACOMP/2012/075 Project.. Lebourg acknowledges the support of UPV through Project PAID-O6-10 and thanks CIBER-BBN for funding her post-doc research. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. J. Rodenas acknowledges the funding of his PhD by the Generalitat Valenciana through VALi+d Grant. The authors also wish to thank the microscopy service of Universidad Politecnica de Valencia as well as the confocal microscopy service of the Research Centre Principe Felipe for useful help and advice.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Performance Improvement of a Sequencing Batch Reactor for Treating Tannery Wastewaters

  • Balaguer-Arnandis, E.
  • Galiana Aleixandre, María Vicenta
  • Cuartas Uribe, Beatriz Elena|||0000-0003-2835-900X
  • Bes-Piá, M.A.|||0000-0001-8005-7450
  • Mendoza Roca, José Antonio
[EN] Tannery wastewater has a high environmental impact due to its low biodegradability. Sequencing batch reactors (SBRs) are an established method for treating highly polluted wastewater. To minimize the hydraulic retention time (HRT) of the SBRs, various HRT values were tested and the best value was chosen according to the removal efficiency of the soluble chemical oxygen demand (COD). A series of experiments was then carried out with two cationic polyelectrolytes added to the system in two different modes to improve the effluent quality. Both modes were evaluated in terms of the soluble COD, suspended solid concentration, and turbidity of the final effluent. The results showed that reducing the HRT to two days did not diminish the COD removal efficiencies., This work was supported by the Universitat Politecnica de Valencia (Project Ref.: PAID-06-10-2269).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the influence of the inlet boundary conditions in a LES simulation of internal flow in a diesel injector

  • Payri, Raul|||0000-0001-7428-5510
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Bracho Leon, Gabriela|||0000-0002-9198-7044
  • Marti Aldaravi, Pedro
In this paper the study of the behavior of the fuel flow through the injector nozzle using CFD tools is presented. Large Eddy Simulation will be used to model the internal flow turbulence in a Diesel fuel injector with velocities over 500 m/s. More specifically, the influence of boundary conditions applied to the model will be studied. The article analyzes the influence of the inlet boundary condition upon activation and maintenance of turbulent flow during the calculation. Carefully assessing which inlet boundary condition is more trustworthy in reality, for this the outlet velocity, pressure, turbulence and level of stabilization will be studied., This work has been funded by UNIVERSIDAD POLITECNICA DE VALENCIA from Spain, in the framework of the project "ESTUDIO DE LA INFLUENCIA DEL LEVANTAMIENTO DE AGUJA EN EL PROCESO DE INYECCION DIESEL'', Reference No. PAID-06-10-2362.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis and characterization of electrochemically Platinum-Polyaniline modified carbon textile electrode

  • Fernández Sáez, Javier
  • Del Río García, Ana Isabel
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
[EN] The present work deals with the use of a carbon fiber fabric for electrochemical purposes. To carry out such investigation, suitable working electrodes of C, Pt/C and Pt/PANI/C were manufactured. Two types of electrodes were made from: Yarns pulled out from the woven textile (CYEs) and strips, 1 cm x 2 cm area, cut from the fabric (CSEs). Cyclic voltammetry (CV) was employed to carry out the electrosynthesis processes. Cyclic and linear voltammetry, electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SECM) were used to study the electrocatalytic properties of carbon modified electrodes (CMEs). X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) were used to know the chemical composition and to describe the morphology of the Pt/PANI/C and Pt/C modified surfaces. Sulphuric and amaranth solutions were chosen for the electrochemical experiments considering the possible applications of CMEs in the field of electrochemical treatment of industrial wastewater polluted with azo dyes., The authors would like to acknowledge to the Spanish Ministry of Science and Innovation (MICINN) for the financial support (CTM2010-18842-C02-02 and CTM 2011-23583), to the Universitat Politecnica de Valencia (Vicerrectorado de Investigacion PAID-06-10 contract 003-233) for the financial support and to the company Carbongen S.A., Cocentaina, Spain, that kindly donated the activated carbon fabric.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The coat protein of Alfalfa mosaic virus interacts and interferes with the transcriptional activity of the bHLH transcription factor ILR3 promoting salicylic acid-dependent defence signalling response

  • APARICIO HERRERO, FREDERIC|||0000-0002-1586-9978
  • Pallás Benet, Vicente|||0000-0003-4954-989X
[EN] During virus infection, specific viral component-host factor interaction elicits the transcriptional reprogramming of diverse cellular pathways. Alfalfa mosaic virus (AMV) can establish a compatible interaction in tobacco and Arabidopsis hosts. We show that the coat protein (CP) of AMV interacts directly with transcription factor (TF) ILR3 of both species. ILR3 is a basic helix-loop-helix (bHLH) family member of TFs, previously proposed to participate in diverse metabolic pathways. ILR3 has been shown to regulate NEET in Arabidopsis, a critical protein in plant development, senescence, iron metabolism and reactive oxygen species (ROS) homeostasis. We show that the AMV CP-ILR3 interaction causes a fraction of this TF to relocate from the nucleus to the nucleolus. ROS, pathogenesis-related protein 1 (PR1) mRNAs, salicylic acid (SA) and jasmonic acid (JA) contents are increased in healthy Arabidopsis loss-of-function ILR3 mutant (ilr3.2) plants, which implicates ILR3 in the regulation of plant defence responses. In AMV-infected wild-type (wt) plants, NEET expression is reduced slightly, but is induced significantly in ilr3.2 mutant plants. Furthermore, the accumulation of SA and JA is induced in Arabidopsis wt-infected plants. AMV infection in ilr3.2 plants increases JA by over 10-fold, and SA is reduced significantly, indicating an antagonist crosstalk effect. The accumulation levels of viral RNAs are decreased significantly in ilr3.2 mutants, but the virus can still systemically invade the plant. The AMV CP-ILR3 interaction may down-regulate a host factor, NEET, leading to the activation of plant hormone responses to obtain a hormonal equilibrium state, where infection remains at a level that does not affect plant viability., F.A. was the recipient of a contract Ramon y Cajal (RYC-2010-06169) program of the Ministerio de Educacion, Cultura y Deporte of Spain. We thank L. Corachan for excellent technical assistance. This work was supported by Grants BIO2014-54862-R from the Spanish grant agency Direccion General de Investigacion Cientifica y Tecnica (DGICT) the Prometeo Program GV2015/010 from the Generalitat Valenciana and PAID-06-10-1496 from the Universitat Politecnica de Valencia (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the electrical properties of novel hybrid organic-inorganic conducting textiles of polypyrrole-phosphotungstate-polyester using electrochemical impedance spectroscopy

  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Cases, Francisco|||0000-0001-8105-4489
  • Del Río García, Ana Isabel
  • Galván, J. C.
The electrical properties of novel hybrid organic-inorganic conducting fabrics of polyester (PES) coated with polypyrrole-PW12O 403- (PPy-POM) have been tested for dry samples and specimens immersed in different pH solutions (1, 7, and 13). Electrical properties changes were measured by means of electrochemical impedance spectroscopy (EIS). This study showed that organic-inorganic PES-PPy-POM conducting textiles act as electronic conductors with semiconducting nature. The electrical conductivity was measured for different temperatures and a value of 44.4 meV was obtained for the activation energy by means of Arrhenius model. Samples immersed in solution increased their conductivity in more acid solutions due to polypyrrole protonation. As acidity increased protonation and oxidation state of polypyrrole chains increased, and a greater diffusion of counter-ions was observed since the hybrid conducting textiles presented a more swollen and porous structure. Counter-ion exchange was higher in more acid solutions since more charge was needed to compensate the positive charge of more oxidized polypyrrole chains. A catalytic effect might be expected for the H+ reduction for this new organic-inorganic electrode material in acid media. © 2011 Elsevier B.V. All rights reserved., Authors thank to the Spanish Ministerio de Ciencia y Tecnologia and European Union Funds (FEDER) (CTM2010-18842-C02-02) and Universitat Politecnica de Valencia (Programa de Apoyo a la Investigacion y Desarrollo de la UPV (PAID-06-10)) for the financial support. J. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for the FPI fellowship. A.I. del Rio is grateful to the Spanish Ministerio de Ciencia y Tecnologia for the FPI fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A well-balanced high-resolution shape-preserving central scheme to solve one-dimensional sediment transport equations

  • Capilla Romá, Maria Teresa|||0000-0002-8764-5754
  • Balaguer-Beser, Ángel|||0000-0003-0039-2641
[EN] We present a well-balanced high-resolution non-oscillatory central finite volume scheme for solving the shallow water equations with a non-flat bottom topology. Time integration is obtained following a Runge¿Kutta procedure, coupled with its natural continuous extension. We use a central scheme with a point value reconstruction algorithm based on average or flux values, which satisfies the monotonicity preserving property. We apply a special treatment for the source term spatial integration, which preserves the time and space accuracy and it results in a well-balanced scheme. Several one-dimensional test cases are used to verify the behaviour and non-oscillatory properties of our scheme., Angel Balaguer thanks the support of the Spanish Ministry of Education and Science in the framework of the Project CGL2009-14220-C02-01. This work was partially funded by the "Programa de Apoyo a la Investigacion y Desarrollo" (PAID-06-10) of the Polytechnic University of Valencia. We express our gratitude to the anonymous reviewers for their helpful comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Derivative-free high-order methods applied to preliminary orbit determination

  • Chicharro, Francisco I.|||0000-0001-9116-2870
  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
From position and velocity coordinates for several given instants, it is possible to determine the orbital elements of the preliminary orbit, taking only into account mutual gravitational attraction forces between the Earth and the satellite. Nevertheless, it should be refined with later observations from ground stations, whose geographic coordinates are previously known. Different methods developed for this purpose need to find a solution of a nonlinear function. In some classical methods it is usual to employ fixed point or secant methods. The second iterative scheme is often used when it is not possible to obtain the derivative of the nonlinear function. Nowadays, there exist efficient numerical methods that are able to highly improve the results obtained by the classical schemes. We will focus our attention on the method of iteration of the true anomaly, in which the secant method is replaced by more efficient methods, such as the second-order Steffensen's method, as well as other high-order derivative-free methods. (C) 2011 Elsevier Ltd. All rights reserved., This research was supported by Ministerio de Ciencia y Tecnologia MTM2011-28636-C02-02 and by Vicerrectorado de Investigacion, Universitat Politecnica de Valencia PAID-06-2010-2285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Is it possible to measure social entrepreneurship in firms?, ¿Es posible medir el emprendimiento social en las empresas?

  • Peris-Ortiz, Marta|||0000-0002-7912-7033
  • Rueda Armengot, Carlos|||0000-0001-5820-4282
  • Palacios Marqués, Daniel|||0000-0002-6415-2025
[EN] This study defines and proposes a measurement scale for social entrepreneurship (SE) in its broadest sense. The broad definition of SE covers for-profit firms that use social aims as a core component of their strategy. By pursuing social aims, these firms can boost the value of their products or services for consumers or exploit new business areas. Under this broad definition of SE, profit-seeking and the pursuit of social aims converge, thereby revealing a form of SE that has received little attention in either theoretical or empirical research. To fill this research gap, the present study proposes a measurement scale to measure broad SE in firms. The process used to build the scale draws upon research by Churchill (1979) and DeVellis (1991) and combines the Delphi technique, a pre-test questionnaire and structural equation modelling. The main aim of this research is to develop a scale capable of measuring broad SE in firms. The theoretical basis for the scale is supported by an empirical study in the hotel sector. The scale provides a valid, reliable instrument for measuring broad SE in firms. The scale meets all sociometric properties required of measurement scales in the social sciences, namely dimensionality, reliability and validity, [ES] Este trabajo define el emprendimiento social (SE) en su dimensión más amplia y propone una escala de medición para el mismo. En lo que se refiere a la dimensión más amplia del SE, esta forma de emprendimiento se refiere a empresas for-profit que incluyen objetivos de carácter social como una parte central de su estrategia, ya que estos objetivos incrementan el valor de sus productos o servicios para los consumidores, o abren nuevas áreas de negocio. De este modo se produce una convergencia entre la búsqueda del beneficio y el cumplimiento de objetivos sociales, poniendo de manifiesto un forma de SE que no ha sido suficientemente definida en la teoría ni investigada en el nivel empírico. De ahí la propuesta de una escala de medición, que constituye el núcleo central de este artículo. En la construcción de la escala, se ha seguido un proceso basado en Churchill (1979) y DeVellis (1991), complementado con la técnica Delphi, un cuestionario pre-test y los modelos de ecuaciones estructurales. El objetivo principal es el desarrollo de una escala que mide el emprendimiento social en la empresa. Dicha metodología se apoya en un estudio empírico realizado en el sector de la hostelería. A través del estudio se obtuvo un instrumento válido y fiable para medir el emprendimiento social en las empresas, que satisface todas las propiedades sociométricas exigibles en las escalas de medición en las ciencias sociales: dimensionalidad, fiabilidad y validez., The authors gratefully acknowledge financial support from the Universitat Politecnica de Valencia through the project Paid-06-12 (Sp 20120792).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Co-modification of Ni-based type Raney electrodeposits for hydrogen evolution reaction in alkaline media

  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • González Buch, Cristina
  • Valero Vidal, Carlos
[EN] In this work, high performance Ni and Ni-Co porous electrodes are prepared using the Raney strategy by galvanic co-deposition for hydrogen evolution reaction (HER) in alkaline solution (KOH 30 wt.%). The incorporation of Co into the Raney Ni matrix causes a surface morphology modification, from cracked to "cauliflower-like", which dominates the superficial structure of the Co-richest obtained material. The evaluation of these electrodes as H-2-evolving cathodes is done through pseudo-steady-state polarization curves and electrochemical impedance spectroscopy (EIS). Ni Raney electrode (without Co) manifests the highest apparent catalytic activity per unit of geometric surface area, which is attributed to the higher surface roughness factor, determined by EIS. HER on the investigated electrocatalysts proceeds via the Volmer-Heyrovsky mechanism, with Heyrovsky as the rate-determining step (rds). From the kinetic parameters it is derived that Co presence, in a composition range of 5-22 at.%, increases the intrinsic catalytic activity of the developed cathodes per unit of true surface area, as a consequence of the synergism between the properties of Ni and of Co. Nevertheless, this improvement does not compensate the lower surface roughness factor, originated by the surface morphology modification as the Co content increases, reporting lower apparent catalytic activities. (C) 2013 Elsevier B.V. All rights reserved., Isaac Herraiz-Cardona is grateful to Fundacion Iberdrola for the economical support by means of the Project: "Desarrollo y caracterizacion de materiales electrodicos porosos estables para la produccion de hidrogeno a partir de la electrolisis alcalina del agua" - II Convocatoria de Ayudas a la Investigacion en Energia y Medio Ambiente. The authors would like to thank the financial support from Generalitat Valenciana (PROMETEO/2010/023) and Universidad Politecnica de Valencia (PAID-06-10-2227).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of cavitation phenomenon using different fuels in a transparent nozzle by hydraulic characterization and visualization

  • Payri, Raul|||0000-0001-7428-5510
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Venegas Pereira, Óscar Hernando
In this paper the behavior of the internal flow under cavitating conditions and the influence of using different fuels is studied. For this purpose, a transparent nozzle (quartz plate) with a cylindrical orifice and four different fuels are used. The nozzle is installed in a pressurized rig with fuel in order to measure the mass flow and observe the flow inside the orifice using a special visualization technique with all fuels. Since the refractive index of the vapor bubbles of the fuel is different to the refractive index of the fuel in liquid state, the cavitation inside the nozzle can be appreciated. Pressure conditions at which the first bubbles inside the orifice appear are compared with the pressure conditions for mass flow collapse, showing that the beginning of the cavitation occurs before the mass flow collapse and that it depends both on the upstream and downstream pressure conditions and on the fluid viscosity used. Additionally it is observed that the mass flow collapse takes place once the cavitation is fully developed through the whole orifice and the presence of bubbles in the spray before the mass flow collapse indicating that the cavitation appears before the mentioned collapse., This work has been funded by Universidad Politecnica de Valencia from Spain, in the framework of the project "Estudio de la influencia del levantamiento de aguja en el proceso de inyeccion diesel", Reference No. PAID-06-10-2362. The authors would like to Jose Enrique del Rey (From CMT-Motores Termicos. Universidad Politecnica de Valencia.) for his collaboration in the experimental measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Expressions for generalized inverses of square matrices

  • Benítez López, Julio|||0000-0002-3222-3036
  • Liu, X.
We find expressions for many types of generalized inverses of an arbitrary square complex matrix by using two representations given in [Benítez J. A new decomposition for square matrices. Electron. J. Linear Algebra. 2010;20:207 225] and in [Hartwig RE, Spindelböck K.Matrices for which A∗ and A commute. Linear Multilinear Algebra. 1984;14:241 256]., The authors wish to thank Prof. Oskar Maria Baksalary for the comments that improved the manuscript. They are also grateful to three anonymous referees for remarking that some proofs can be simplified. The first author is supported by work funded by Vicerrectorado de Investigacion U.P.V. PAID 06-2010-2285. The second author is supported by the NSFC Grant (11061005, 61165015) and the Ministry of Education Science and Technology Key Project under Grant 210164 and Grants (HCIC201103) of Guangxi Key Laborarory of Hybrid Computational and IC Design Analysis Open Fund and Key issues for Department of Education of Guangxi (201202ZD031).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparative Study of the Rheological Behavior of Multiwalled Carbon Nanotubes and Nanofiber Composites Prepared by the Dilution of a Masterbatch of Polypropylene

  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Pascual, J.
  • Peris, F.
In this investigation, the characteristics and the rheological properties of two different nanocomposite systems were investigated. These systems consisted of a dispersion of carbon nanotubes (CNTs) and carbon nanofibers (CNFs) in a polypropylene (PP) matrix. The mixing process was carried out by melt compounding with a twin-screw corotating extruder with different reinforcement amounts (0.2-20 wt %) from concentrated masterbatches (20 wt %) of PP/CNT and PP/CNF. The results show a remarkable increase in the viscosity for both blends as the reinforcement amount was increased. It was important to evaluate the rheological behavior to understand the effect of the nanocarbon particles on the internal structures and their processing properties of the obtained composites. CNFs were a more viable reinforcement from a processability point of view because the obtained viscosities of the PP/CNF blends were more manageable. © 2012 Wiley Periodicals, Inc., Contract grant sponsor: Universitat Politecnica de Valencia; contract grant number: PAID-06-10-003-300.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Increasing the convergence order of an iterative method for nonlinear systems

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Martínez Molada, Eulalia|||0000-0003-2869-4334
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Hueso Pagoaga, José Luís
In this work we introduce a technique for solving nonlinear systems that improves the order of convergence of any given iterative method which uses the Newton iteration as a predictor. The main idea is to compose a given iterative method of order p with a modification of the Newton method that introduces just one evaluation of the function, obtaining a new method of order p+2. By applying this procedure to known methods of order three and four, we obtain new methods of order five and six, respectively. The efficiency index and the computational effort of the new methods are checked. We also perform different numerical tests that confirm the theoretical results and allow us to compare these methods with the ones from which have been derived and with the classical Newton method. © 2012 Elsevier Ltd. All rights reserved., This research was supported by Ministerio de Ciencia e Innovacion MTM2011-28636-C02-02 and by Vicerrectorado de Investigacion, Universitat Politecnica de ValenciaPAID-06-2010-2285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ultrasonic evaluation of the hydration degree of the orange peel

  • Jimenez, Noe|||0000-0002-6539-670X
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Redondo, Javier|||0000-0002-5507-7799
  • Roig, Bernardino|||0000-0002-9599-572X
The elastic parameters of fruit and vegetables are normally monitored in quality control processes as there is a good correlation to the degrees of firmness, turgidity and humidity. These parameters have been traditionally measured by means of penetration tests, which are destructive. This has resulted in the increased attention recently given to ultrasonic techniques applied to the quality evaluation of horticultural commodities. Nevertheless, since most of the fruit and vegetables display a viscoelastic behavior, the penetration test should be considered to be quasi-static, especially when compared with the speeds associated with the ultrasonic tests. Both methods should provide different values for the elastic parameters. The aim of this work is to study this discrepancy in the values of the elastic parameters and interpret the elastodynamic behavior of the vegetable tissue under an ultrasound test. Thus, the paper presents an ultrasonic nondestructive method to evaluate the elastic parameters of the sweet orange peel at 40. kHz. The complete dehydration process of two sets of oranges (Navelina and Ortanique) was monitored for 2. months. A linear elastic solid model with viscous losses was numerically solved using a simulation scheme based on a 3D-Spherical FDTD method (Finite-Difference Time-Domain) in order to interpret the results, which proved that the elastic parameters obtained by penetration and ultrasonic tests differ. The method provides an empirical relation between the hydration state and the elastic parameters of the orange peel. Therefore, the proposed ultrasonic test reported in this work is capable of determining the hydration state of the orange simply by measuring the propagation speed of the Rayleigh waves on the orange peel, and hence, can be used as a fruit quality index during postharvest processes. © 2012 Elsevier B.V., This study was supported by the Programa de Apoyo a la Investigacion y Desarrollo (PAID-05-09-002-618), (PAID-06-10-002-295) of Universidad Politecnica de Valencia. The authors would like to thank K. Y. Foo, from the University of Birmingham and P. Malischewsky from the University Friedrich-Schiller at Jena, for the fruitful discussions regarding surface acoustic waves.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Variations in SME Characteristics and the Use of Service Intermediaries for R&amp, D

  • Castrogiovanni, Gary J.
  • Domenech, Josep|||0000-0002-7302-5810
  • Mas Verdú, Francisco|||0000-0002-0902-9462
[EN] Large companies increasingly look externally for opportunities to enhance innovation, which has resulted in closer study of innovation systems. We examined the role of service intermediaries (universities, technology centers, and consultants) within these systems using a sample of predominately small- and medium-sized enterprises located in Valencia, Spain. As with studies of large companies, absorptive capacity (e.g., research and development expenditures) was positively related to the likelihood that a firm would engage in service collaborations. However, the rate of collaboration was higher relative to studies dominated by larger companies. Also, there were differences in the pattern of firm characteristics associated with the use of specific services. For example, the level of SME export activity related positively to the use of technology centers, but negatively to university collaborations, The authors thank the Alto Consejo Consultivo en I + D of the Generalitat Valenciana and IMPIVA for facilitating the access to the survey on which this paper is based and, especially, Manuel López Estornell and Emilio Cubel for preparing the questionnaire and the sample. This work has been partially supported by the Universitat Politecnica de Valencia under grants PAID-06-10/2424 and PAID 06-10/2392, and Generalitat Valenciana under grants GV/2011/002 and GV/2011/049
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Polyaniline coated conducting fabrics. Chemical and electrochemical characterization

  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
  • Esteves, M.F.
  • Fernández Sáez, Javier
Polyaniline coated conducting fabrics have been obtained by chemical oxidation of aniline by potassium peroxydisulfate on polyester fabrics. Two different acids have been employed to carry out the synthesis (HCl and H 2SO 4), obtaining the best results of conductivity with the latter one. The conducting fabrics have been characterized chemically by means of Fourier transform infrared spectroscopy with attenuated total reflection (FTIR-ATR), energy dispersive X-Ray (EDX) and X-ray photoelectron spectroscopy (XPS). The morphology of the coatings has been observed by means of scanning electron microscopy (SEM). The conducting properties of the fabrics have been measured by means of electrochemical impedance spectroscopy (EIS). The electrochemical characterization has been carried out by means of cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM). The conducting fabrics have also shown electrochromic properties, changing its color from green yellowish at -1 V to dark green at +2 V. The durability of the coating has been evaluated by means of washing and rubbing fastness tests. © 2011 Elsevier Ltd. All rights reserved., Authors thank to the Spanish Ministerio de Ciencia e Innovacion and European Union Funds (FEDER) (contract CTM2010-18842-C02-02) and Universitat Politecnica de Valencia (Primeros Proyectos de Investigacion (PAID-06-10)) for the financial support. J. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for the FPI fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the chemical composition and the mechanical behaviour of 20th century commercial artists&apos, oil paints containing manganese-based pigments

  • Fuster-López, Laura|||0000-0001-7072-7190
  • Yusa Marco, Dolores Julia|||0000-0001-8207-3972
  • Izzo, F.C.
  • Piovesan, M.
  • Sperni, L.
  • Zendri, Elisabetta
[EN] The present study deals with 20th century manufactured artists' oil paints containing raw and burnt umber pigments, this is, natural earth pigments resulting from the combination of iron and manganese oxides. Manganese, in particular, is known to be a primary drier and to have a siccative effect on oil paint films. This research aims to show the diversity of formulations behind apparently same commercial names as well as to understand how the content of manganese, the presence of modern lipidic media and the hydrolysis mechanisms can promote significant differences in the expected mechanical properties of oil paint films, thus conditioning their long-term performance. Several manufactured artists' oil paint films containing manganese were selected. Dried films from raw and burnt umber oil paints by Winsor & (UK), Grumbacher (R) (USA), Gamblin (R) (USA) and Speedball (R) (USA) were studied and information about their chemical composition and mechanical behaviour is here presented. In addition-to the identification and the study of the inorganic and organic components present in each formulation through LM, SEM-EDX, FTIR-ATR, XRD, GC-MS analysis, tensile tests were run and stress strain curves were obtained. Together with evident hue differences, the obtained results showed significant differences in the chemical composition and the mechanical behaviour of the oil paint films. (C) 2015 Elsevier B.V. All rights reserved., The authors are deeply indebted to Dr. M.F. Mecklenburg (Museum Conservation Institute-Smithsonian Institution, USA) for providing the samples tested in this study and for the equipment donated. Gamblin Artists Colors and Kremer Pigmente GmbH & Co. KG are equally acknowledged for assisting with technical information regarding the materials tested. The authors also want to thank M. Planes and Dr. Moya (Microscopy Service, UPV) as well as Dra. Mestre (XRD Service at S.C.S.I.E, Universidad de Valencia-UV) for their technical assistance. This research was also possible thanks to the financial support from Ca' Foscari University of Venice (IRIDE departmental fund) and UPV Programa de Incentivo a la Investigacion (PAID-UPV-06-10-2429).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Comparison of Prediction Algorithms for Prefetching in the Current Web

  • Domenech, Josep|||0000-0002-7302-5810
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Gil Salinas, José Antonio
  • Pont Sanjuan, Ana
[EN] This paper reviews a representative subset of the prediction algorithms used for Web prefetching classifying them according to the information gathered. Then, the DDG algorithm is described. The main novelty of this algorithm lies in the fact that, unlike previous algorithms, it creates a prediction model according to the structure of the current web. To this end, the algorithm distinguishes between container objects and embedded objects. Its performance is compared against important existing algorithms, and results show that, for the same amount of extra requests to the server, DDG always outperforms those algorithms by reducing the perceived latency up to 70% more without increasing the complexity order., This work has been partially supported by the Spanish Ministry of Science and Innovation under Grant TIN2009-08201, the Generalitat Valenciana under Grant GV/2011/002 and the Universitat Politecnica de Valencia under Grant PAID-06-10/2424.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Quasi-LDU factorization of nonsingular totally nonpositive matrices

  • Cantó Colomina, Rafael|||0000-0002-1341-2800
  • Ricarte Benedito, Beatriz|||0000-0001-8094-1908
  • Urbano Salvador, Ana María|||0000-0001-8590-1243
Let A = (a(ij)) is an element of R-nxn be a nonsingular totally nonpositive matrix. In this paper we describe some properties of these matrices when a(11) = 0 and obtain a characterization in terms of the quasi-LDU factorization of A, where L is a block lower triangular matrix, D is a diagonal matrix and U is a unit upper triangular matrix. (c) 2012 Elsevier Inc. All rights reserved., The authors are very grateful to the referees for their helpful suggestions. This research was supported by the Spanish DGI Grant MTM2010-18228 and the Programa de Apoyo a la Investigacion y Desarrollo (PAID-06-10) of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Role of the yeast multidrug transporter Qdr2 in cation homeostasis and the oxidative stress response

  • Rios Garcia, Gabino
  • Cabedo López, Marc
  • Rull Costa, Baltasaar
  • Yenush, Lynne|||0000-0001-8589-7002
  • Serrano Salom, Ramón
  • Mulet, José Miguel|||0000-0002-9087-3838
[EN] We have identified QDR2 in a screening for genes able to confer tolerance to sodium and/or lithium stress upon overexpression. Qdr2 is a multidrug transporter of the major facilitator superfamily, originally described for its ability to transport the antimalarial drug quinidine and the herbicide barban. In order to identify its physiological substrate, we have screened for phenotypes dependent on QDR2 and found that Qdr2 is able to transport monovalent and divalent cations with poor selectivity, as shown by growth tests and the determination of internal cation content. Moreover, strains overexpressing or lacking QDR2 also exhibit phenotypes when reactive oxygen species producing agents, such as hydrogen peroxide or menadione, were added to the growth medium. We have also found that the presence of copper and hydrogen peroxide repress the expression of QDR2. In addition, the copper uptake of a qdr2 mutant strain is similar to a wild type, but the extrusion is clearly impaired. Based on our results, we propose that free divalent copper is the main physiological substrate of Qdr2. As copper is a substrate for several redox reactions that occur within the cytoplasm, this function in copper homeostasis explains its role in the oxidative stress response, We are indebted to Prof. A. Maquieira for technical assistance in copper measurements. This work was supported by grants PAID-06-10-1496 of the Universitat Politecnica de Valencia (Valencia, Spain), PROMETEO/2010/038 of the 'Conselleria de Educacion' (Valencia, Spain), by grant BFU2011-30197-C03-03 and by grant BFU2011-22526 from the Ministerio de Ciencia e Innovacion (Madrid, Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simulación numérica de una cerámica piezoeléctrica

  • González-Salido, Nuria
  • Ferri, Marcelino
  • Jiménez, Noé
  • Camarena, Francisco
  • Picó, Rubén
  • Redondo, Javier|||0000-0002-5507-7799
  • Roig, Bernardino|||0000-0002-9599-572X
[EN] In this paper, a mathematical model describing the dynamic behavior of a commercial piezoelectric ceramic, vibrating in thickness, is presented. This model solves, by finite differences, the piezoelectric equations which relate he mechanical and electrical phenomena produced in this kind of material. The behavior in time domain of some physical variables, as the electric field and particle velocity, is simulated too. In addition, we have implemented a GUI in Matlab that allows simple and affordable simulations for all users. The implemented interface provides two kind of study: Broadband and single frequency excitation. The output parameters, obtained after time domain simulation, are piezoelectric constants of the ceramic and the electric response in frequency domain, i.e. admittance and impedance curves. The results allow predicting vibration modes, electrical response and understanding the effect of piezoelectricity on the mechanical response., [ES] En este trabajo se presenta un modelo matemático que describe el comportamiento dinámico de una cerámica piezoeléctrica comercial vibrando en modo espesor. Dicho modelo resuelve, mediante diferencias finitas, las ecuaciones piezoeléctricas que relacionan los fenómenos mecánicos y eléctricos que se producen en este tipo de materiales, y simula el comportamiento de algunas variables físicas puntuales -como campo eléctrico o velocidad de partícula- en el dominio de tiempo. Asimismo, se ha implementado un entorno gráfico en Matlab que permite realizar las simulaciones de forma sencilla y asequible a todos los usuarios. Esta interfaz contempla dos tipos de estudio: excitación de la cerámica en banda ancha y excitación a una sola frecuencia. Como valores de salida el programa facilita, una vez finalizada la simulación de las variables dependientes del tiempo, los distintos parámetros piezoeléctricos de la cerámica y su respuesta eléctrica en el dominio de la frecuencia (curvas de admitancia e impedancia). Los resultados obtenidos permiten, además de predecir los modos propios de vibración y la respuesta eléctrica, comprender el efecto de piezoelectricidad en la respuesta mecánica de un medio material., Este trabajo ha sido financiado por la Universitat Politècnica de València bajo los proyectos PAID 06-10-002-295 y PAID 05-11-002-340
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the catalytic activity of 3D macroporous Ni and NiMo cathodes for hydrogen production by alkaline water electrolysis

  • González Buch, Cristina
  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
Platinum is the electrode material with the highest catalytic activity for the hydrogen evolution reaction (HER). However, its high cost and scarcity are the two major barriers for its usage in the industrial alkaline water electrolysis, which requires searching for other cheaper and more available materials with good catalytic activity. Ni based materials have attracted more and more attention due to their good activity for the HER and sufficient corrosion resistance in alkaline solutions at considerable low cost. According to the Brewer intermetallic bonding theory, molybdenum alloyed with nickel (hypo hyper-d-electronic transition metal) could improve the intrinsic catalytic activity for the HER. In this work, Ni and NiMo metallic coatings were galvanostatically electrodeposited on a stainless steel AISI 304 substrate by means of the double template electrochemical process. The evaluation of these electrodes as H2-evolving cathodes was done in 30 % wt. KOH by pseudo-steady-state polarization curves and electrochemical impedance spectroscopy (EIS) at different temperatures. From Tafel curves results, it is shown that the NiMo electrodes have higher catalytic activity than Ni. On the other hand, from EIS results, it is possible to conclude that the NiMo electrodes showed higher intrinsic catalytic activity for HER than the pure Ni electrode as a consequence of alloying hypo hyper-d-electronic transition metals., The authors acknowledge the support of Generalitat Valenciana (PROMETEO/2010/023) and Universidad Politecnica de Valencia (PAID-06-10-2227). We wish to thank the Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Phenolic Profile of Cane Sugar DerivativesExhibiting Antioxidant and Antibacterial Properties

  • Barrera Puigdollers, Cristina|||0000-0003-4408-3541
  • Betoret Valls, Noelia|||0000-0002-3326-8797
  • Seguí Gil, Lucía|||0000-0002-2711-9445
[EN] Health beneficial effects of sugarcane have been attributed to antioxidant components present in the plant material, phenolic compounds having been identified mainly in the raw juice, culms and leaves. However, the presence of specific natural phenolic constituents in non-refined cane sugars and their potential impact on the diet as an alternative to refined sugar have not been completely evaluated. Phenolic constituents of six commercially available sugarcane derivatives (granulated jaggery, muscovado sugar, light and regular jaggery blocks, cane honey and brown sugar) were identified and quantified, in addition to their physicochemical, antioxidant and antimicrobial properties against cariogenic bacteria. Physicochemical and antioxidant properties of raw sugars were highly related to degree of refining of each product. Specific hydroxycinnamic acids (chlorogenic, caffeic, coumaric, ferulic) and flavones (apigenin, tricin, luteolin) were identified and quantified in sugarcane products. Tricin and apigenin were the most abundant phenolics in raw sugars, both considered important bioactive constituents of foods which postulate as nutraceuticals, antiproliferative and chemopreventive agents. Some derivatives and their extracts also exhibited antibacterial properties against Streptococcus mutans and Streptococcus sobrinus. Bioactive compounds identified in raw sugars make sugarcane natural sweeteners a healthier alternative to white sugar, to be used at home and industry. Granulated jaggeries postulate as the best substitutive due to their nutritional benefits and physicochemical attributes., This work was supported by the Universitat Politecnica de Valencia (UPV/PAID2010-2420) and Generalitat Valenciana (GV/2013/047). The authors would like to acknowledge both institutions for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of Pt nanoparticles on electrochemically reduced graphene oxide by potentiostatic and alternate current methods

  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
  • Fernández Sáez, Javier
  • Del Río García, Ana Isabel
Reduced graphene oxide (RGO) has been synthesized on Pt wires by means of a potentiodynamic method between +0.6 V and -1.4'V for 20 scans. Cyclic voltammetry characterization of the coatings showed the typical capacitative behavior of graphene. Pt nanoparticles were synthesized on Pt-RGO electrodes by means of potentiostatic methods and a comparison between different synthesis potentials (-0.16, 0, +0.2 and +0.4 V) for the same synthesis charge (mC.cm(-2)) was established. The electrodes obtained were characterized in 0.5 M H2SO4 solution to observe the characteristic oxidation and reduction processes of the Pt surface. A 0.5 M H2SO4/0.5 M CH3OH solution was used to measure the catalytic properties of the deposits against methanol oxidation. The most appropriate potential to perform the synthesis was 0 V followed by -0.16 V and +0.2 V. The morphology of the coatings varied depending on the potential applied as observed by scanning electron microscopy. Alternate current methods were also used to synthesize Pt nanoparticles and compare the results with the traditional potentiostatic method. Different frequencies were used: 0.1, 1, 10, 100, 1000 and 10000 Hz. Alternate current synthesis is more efficient than traditional potentiostatic methods, obtaining more electroactive coatings with less effective synthesis time. (C) 2014 Elsevier Inc. All rights reserved., Authors wish to thank to the Spanish Ministerio de Ciencia e Innovacion (contract CTM2011-23583) and Universitat Politecnica de Valencia (Vicerrectorado de Investigacion PAID-06-10 contract 003-233) for the financial support. J. Molina is grateful to the Conselleria d'Educacio, Formacio i Ocupacio (Generalitat Valenciana) for the Programa VALi+D Postdoctoral Fellowship. A.I. del Rio is grateful to the Spanish Ministerio de Ciencia y Tecnologia for the FPI fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simultaneous detection of Clavibacter michiganensis subsp michiganensis, Pepino mosaic virus and Mexican papita viroid by non-radioactive molecular hybridization using a unique polyprobe

  • Zamora-Macorra, E
  • Ochoa-Martinez, DL
  • Valdovinos-Ponce, G
  • Rojas-Martinez, R
  • Ramirez-Rojas, S
  • Sánchez-Navarro, Jesús-Ángel|||0000-0002-3320-2827
  • Pallás Benet, Vicente|||0000-0003-4954-989X
  • APARICIO HERRERO, FREDERIC|||0000-0002-1586-9978
Clavibacter michiganensis subsp. michiganensis, Pepino mosaic virus, and Mexican papita viroid are three economically important pathogens that infect tomato crops. In this work, a polyprobe (poly-3) was developed and evaluated for the simultaneous detection of these pathogens in tomato plants by non-isotopic molecular hybridization. The endpoint detection limit of the poly-3 with C. michiganensis subsp. michiganensis cell cultures was 10(6) CFU/ml. No differences were found in terms of the sensitivity and specificity when the individual riboprobes were compared to the poly-3 for the detection of the three pathogens. The analysis of 80 tomato field samples by the poly-3 and RT-PCR techniques rendered the same number of positive samples for each pathogen. As far as we know this is the first time that three pathogens with very different life cycle styles (bacteria, virus and viroid) are simultaneously detected in a single assay. The possibility of using this poly-3 technology for the routine diagnosis of field tomato samples is discussed., E.J M-Z. was recipient of a Pre-doctoral fellowship from the Consejo Nacional de Ciencia y Tecnologia of Mexico. F.A. was recipient of a contract Ramon y Cajal (RYC-2010-06169) Program of the Ministerio de Educacion y Ciencia of Spain. We thank L. Corachan for her excellent technical assistance. This work was supported by Grants BIO2014-54862-R from the Spanish Granting Agency DGICYT, the Prometeo Program GV2011/003 from the Generalitat Valenciana and PAID-06-10-1496 from the Universitat Politecnica de Valencia (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Flow regime effects over non-cavitating diesel injection nozzles

  • Payri, Raul|||0000-0001-7428-5510
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Gimeno, Jaime|||0000-0003-3317-9994
  • García Martínez, Antonio|||0000-0001-5783-4936
[EN] The research conducted and explained in this paper aims to explore and understand the influence of flow regime (laminar, transition or turbulent) inside diesel injector nozzles. For this purpose, an experimental study based on mass flow rate and momentum flux measurements on three convergent nozzles has been carried out. The combination of both types of measurement has been helpful to obtain information about the nature of the flow and its consequences on important variables, such as injection effective velocity and effective area of nozzle outlet orifices. As a main result of the investigation, and depending of the flow regime, a differentiated behaviour has been observed which was clearly reflected in the non-dimensional flow parameters defined and used through the study. © Author 2011., This work was supported by Project ‘Estudio de la influencia del levantamiento de aguja en el proceso de inyeccio´n die´sel’ from Universidad Polite´cnica de Valencia, Spain [grant number PAID-06-10-2362].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ultrasonic transmission through multiple-sublattice subwavelength holes arrays

  • Estrada Beltrán, Héctor Andrés
  • Gómez Lozano, Vicente|||0000-0002-4564-8287
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Belmar Ibáñez, Francisco|||0000-0003-4412-0007
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
The ultrasonic transmission through plates perforated with 2 x 2 or 3 x 3 square array of subwavelength holes per unit cell are studied by numerical simulations. Calculations are obtained by means of a theoretical model under the rigid-solid assumption. It is demonstrated that when the inter-hole distance within the unit cell is reduced, new transmission dips appear resulting from Wood anomalies that have influence on the second and the third order Fabry-Perot peak. When the inter-hole distance within the unit cell is reduced, the transmission spectrum of the multiple-sublattice holes arrays tends to the transmission spectrum of a plate perforated with only one hole in the unit cell. (C) 2011 Elsevier B.V. All rights reserved., This work has been supported by the Spanish MICINN (MAT2010-16879), Generalitat Valenciana (PROMETEO 2010/043) and Universidad Politecnica de Valencia (PAID-06-10-1839). H.E. acknowledges the support of CSIC-JAEpredoc scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of azo dyes on Pt and Pt/polyaniline/dispersed Pt electrodes

  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
  • Fernández Sáez, Javier
  • Del Río García, Ana Isabel
The electrochemical characterization of two organic dyes (amaranth and procion orange MX-2R) has been performed on Pt electrodes and Pt electrodes coated with polyaniline and dispersed Pt. Electrodes with different Pt loads have been synthesized and characterized obtaining that a load of 300 ¿g cm -2 was the optimum one. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) was employed to observe the distribution and morphology of the Pt nanoparticles. The electroactivity of the electrodes has also been characterized by means of scanning electrochemical microscopy (SECM). The chemical characterization of Pt dispersed Pani coated Pt electrodes (Pt-Pani-Pt) was performed by means of X-ray photoelectron spectroscopy (XPS). The electrochemical characterization of the dyes has been performed by means of cyclic voltammetry. Voltammograms have shown that the presence of the dyes diminishes characteristic Pt oxidation and reduction peaks. However, redox processes due to the dyes, appeared in the voltammograms. The different species responsible of these redox processes were generated in the vicinity of the electrode and were not adsorbed on the electrode surface since after stirring, the different redox processes disappeared. Characterization with different scan rates showed that redox processes of both dyes were controlled by diffusion. © 2012 Elsevier B.V., Authors thank to the Spanish Ministerio de Ciencia e Innovacion and European Union Funds (FEDER) (contracts CTM2010-18842-C02-02 and CTM2011-23583) and Universitat Politecnica de Valencia (Vicerrectorado de Investigacion PAID-06-10 contract 003-233) for the financial support. J. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for the FPI fellowship. A.I. del Rio is grateful to the Spanish Ministerio de Ciencia y Tecnologia for the FPI fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Patellins 3 and 6, two members of the Plant Patellin family, interact with the movement protein of Alfalfa mosaic virus and interfere with viral movement

  • Peiró Morell, Ana
  • Izquierdo García, Ana Cristina
  • Sánchez-Navarro, Jesús-Ángel|||0000-0002-3320-2827
  • Pallás Benet, Vicente|||0000-0003-4954-989X
  • Mulet, José Miguel|||0000-0002-9087-3838
  • APARICIO HERRERO, FREDERIC|||0000-0002-1586-9978
[EN] Movement proteins (MPs) encoded by plant viruses interact with host proteins to facilitate or interfere with intra- and/or intercellular viral movement. Using yeast two-hybrid and bimolecular fluorescence complementation assays, we herein present invivo evidence for the interaction between Alfalfa mosaic virus (AMV) MP and Arabidopsis Patellin 3 (atPATL3) and Patellin 6 (atPATL6), two proteins containing a Sec14 domain. Proteins with Sec14 domains are implicated in membrane trafficking, cytoskeleton dynamics, lipid metabolism and lipid-mediated regulatory functions. Interestingly, the overexpression of atPATL3 and/or atPATL6 interfered with the plasmodesmata targeting of AMV MP and correlated with reduced infection foci size. Consistently, the viral RNA levels increased in the single and double Arabidopsis knockout mutants for atPATL3 and atPATL6. Our results indicate that, in general, MP-PATL interactions interfere with the correct subcellular targeting of MP, thus rendering the intracellular transport of viral MP-containing complexes less efficient and diminishing cell-to-cell movement., AP was a recipient of a Pre-Doctoral Fellowship from the program JAE Pre-Doc of Consejo superior de Investigaciones Cientificas. ACI-G was a recipient of a Pre-Doctoral Fellowship associated with the project BFU2008-00604. FA was a recipient of a contract Ramon y Cajal (RYC-2010-06169) Program of the Ministerio de Educacion y Ciencia of Spain. We thank L. Corachan for excellent technical assistance. This work was supported by grants BIO2011-25018 from the Direccion General de Investigacion Cientifica y Tecnica, the Prometeo Program GV2011/003 from the Generalitat Valenciana and PAID-06-10-1496 from the Universitat Politecnica de Valencia (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Acoustic radiation efficiency of a periodically corrugated rigid piston

  • Estrada, Héctor
  • Meseguer Rico, Francisco Javier
  • Uris Martínez, Antonio|||0000-0002-2005-2305
The radiation of sound by a periodically corrugated rigid piston is explored using theoretical and numerical approaches and compared with the radiation of flat rigid piston. The depth and the period of the corrugation are considered to be comparable with the wavelength in the surrounding fluid. Radiation enhancement is predicted due to cavity resonances and coherent diffraction. In addition, broad regions of low radiation efficiency are observed. Both effects could have an impact in acoustic transducers technology, either to increase the piston radiated power or to create a source of evanescent acoustic waves. The possibilities offered by this strategy in the nonlinear acoustic regime are also briefly discussed. (C) 2012 American Institute of Physics., This work has been supported by the Spanish MICINN (MAT2010-16879, Consolider CSD2007-00046 and Universitat Politecnica de Valencia (PAID-06-10-1839). We gratefully acknowledge the valuable help of Javier Garcia de Abajo in the development of the modal model.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical synthesis of polyaniline on conducting fabrics of polyester covered with polypyrrole/PW12O403-. Chemical and electrochemical characterization

  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
  • Fernández Sáez, Javier
  • Del Río García, Ana Isabel
Polyaniline (Pani) has been electrochemically polymerized on conducting fabrics of polyester covered with polypyrrole/PW 12O 40 3-, obtaining a double conducting polymer layer. Electrochemical synthesis was performed by potentiostatic synthesis at 1 V. The chemical characterization of the material before and after Pani polymerization was performed by means of X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray (EDX) and Fourier transform infrared spectroscopy (FTIR). The morphology of the coatings was observed employing scanning electron microscopy (SEM). The electrochemical characterization was performed by cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM). It has been demonstrated that scan rate is an important parameter that influences the response obtained when characterizing conducting fabrics by CV. High scan rates do not allow the observation of redox peaks. However if lower scan rates are employed its apparition has been reported. The electrochemical deposit of polyaniline enhances the electroactivity of the material as it has been demonstrated by CV. SECM measurements showed local response with positive feedback (electroactive material) for the samples in open circuit conditions. XPS analysis also showed a higher doping level (N +/N), consistent with higher material electroactivity. © 2011 Elsevier B.V., Authors thank to the Spanish Ministerio de Ciencia y Tecnologia and European Union Funds (FEDER) (contract CTM2007-66570-C02-02 and CTM2010-18842-C02-02) and Universidad Politecnica de Valencia (Primeros Proyectos de Investigacion (PAID-06-10)) for the financial support. j. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for the FPI fellowship. A.I. del Rio is grateful to the Spanish Ministerio de Ciencia y Tecnologia for the FPI fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Upper-bound modelization of an ironed three-layered polymer-coated steel strip

  • Sellés, M.A.|||0000-0002-0784-5757
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Pérez Bernabeu, Elena|||0000-0002-9221-7623
  • Reig-Pérez, Miguel Jorge|||0000-0003-0226-1194
  • Schmid, S.R.
[EN] Global beverage can and food container consumption is very high, with billions of cans produced annually worldwide. There are several steps in can manufacturing, but ironing is the most crucial. In a previous work (Sellés et al., J Mater Process Technol 202:7-14, 2008), a series of ironing experiments were reported using a new material and an ironing simulator. This material was a three-layered polymer-coated steel, and it was seen that under some process conditions, it survived the ironing process with no damage in any of the three layers. The critical die angle was determined as well as specimen quality surface tests. In this paper, an associated theoretical ironing model is described, using the upper-bound theorem and considering the cases of successful ironing or shaving. It is possible to give insight into how to design a material that irons well. For example, the optimal layer thicknesses are also found., The authors wish to thank Mittal Steel for financial support and for providing all required materials. Authors also thank the support of Universitat Politècnica de València [grant number PAID-06-10-003-305].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modelling of big game populations when hunting is age and sex selective

  • Cantó Colomina, Rafael|||0000-0002-1341-2800
  • Ricarte Benedito, Beatriz|||0000-0001-8094-1908
  • Urbano Salvador, Ana María|||0000-0001-8590-1243
The main objective of this work is to model the dynamics of cynegetic populations by means of a linear control system. We want to estimate the annual corrective measures, which may be improvements or hunting, that must be implemented to achieve and maintain a study population around the carrying capacity of a certain area. Moreover, the model must be able to distinguish between different age-sex classes and lead the population to a desired distribution of individuals among these stage groups., Supported by the Spanish DGI grant MTM2010-18228 and by the UPV under its research program PAID-06-10.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modified carbon fabric electrodes: preparation and electrochemical behavior toward amaranth electrolysis

  • Fernández Sáez, Javier
  • Del Río García, Ana Isabel
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
The electrochemical behavior of non-modified, Pt-modified, and Pt/polyaniline-modified carbon fiber textile electrodes was studied through a series of electrolyses, under potentiostatic conditions, on an amaranth/sulfuric solution in the presence or absence of chloride ion. The morphology of the dispersed Pt, PANI, and PANI/Pt coatings was analyzed by scanning electron microscopy. Scanning electrochemical microscopy confirmed that the textile surface was effectively modified by the electrocatalytic material. Color removal reached values above 90 % in both electroreduction and electrooxidation processes. The amaranth electroreductions carried out with the non-modified electrode showed better charge efficiency than those with the Pt-modified textile electrode. The electrooxidations with Pt-modified textile electrodes showed a significant reduction in electrolysis time. Ultraviolet-visible and Fourier transform infrared with attenuated total reflection spectra enabled the electrochemical behavior of the non-modified and Pt/PANI-modified electrodes to be distinguished., The authors wish to acknowledge to the Spanish Ministerio de Ciencia e Innovacion (contract CTM2011-23583) and Universitat Politecnica de Valencia (Vicerrectorado de Investigacion PAID-06-10 contract 003-233) for the financial support; and as well as Carbongen S. A. (Cocentaina, Spain), who kindly donated the activated carbon fabric. J. Molina is grateful to the Conselleria d'Educacio, Formacio i Ocupacio (Generalitat Valenciana) for the Programa VALi+D Postdoctoral Fellowship. A.I. del Rio is grateful to the Spanish Ministerio de Ciencia y Tecnologia for the FPI fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Different hyaluronic acid morphology modulates primary articular chondrocyte behaviour in hyaluronic acid coated polycaprolactone scaffolds

  • Lebourg, Myriam Madeleine
  • Sousa, Tiago
  • Mano, Joao
  • Ródenas Rochina, Joaquín|||0000-0001-5764-207X
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Scaffolds for cartilage tissue engineering should promote both adequate biomechanical environment and chondrogenic stimulation. Hyaluronic acid (HA) has been used in cartilage engineering for its chondrogenic and chondroprotective properties, nevertheless its mechanical properties are limited. Influence of HA microstructure in chondrocyte response has not been addressed yet. In this work, polycaprolactone (PCL) scaffolds were modified using HA following two coating strategies: coating in one step (PCL-HA1s) yields a gel-like phase within the scaffold, whereas a two-step reaction (PCL-HA2s) yields a thin HA layer coating internal surfaces of PCL structure. Chondrocytes were seeded in the scaffolds and cultured in dedifferentiating conditions up to 3 weeks and analyzed using a total DNA assay and sulfated glycosaminoglycan (sGAG) determination assay; cell morphology and extracellular matrix secretion were assessed by electron microscopy as well as immunofluorescent imaging (collagen I, collagen II, aggrecan, CD44). Cells proliferate in all samples and no cytotoxicity is observed. PCL-HA1s shows higher sGAG production per cell than PCL and PCL-HA2s at all times. Presence of hyaluronic acid promotes qualitative expression of CD44 surface markers and aggrecan (more visible in PCL-HA1s than PCL-HA2s), whereas in dedifferentiating conditions, expression of CD44 and aggrecan can hardly be detected in pure PCL scaffolds. Collagen type II seems more prominent in PCL-HA2s; although PCL-HA2s shows markers for COL II, aggrecan and CD44, quantitative ECM production is not improved with respect to PCL. It is thus likely that CD44 activation is not sufficient for explaining the better response in PCL-HA1s., Contract grant sponsors: CIBER-BBN; VI National R&D&i Plan 2008-2011; Iniciativa Ingenio 2010; Consolider Program; Instituto de Salud Carlos III; European Regional Development Fund; Valencian Generality; Conselleria de Sanidad (Generalitat Valenciana)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cell-free cartilage engineering approach using hyaluronic acid-polycaprolactone scaffolds: A study invivo

  • Lebourg, Myriam Madeleine
  • Martínez Díaz, S.
  • Garcia Giralt, Natalia
  • Torres Claramunt, R.
  • Vila Canet, G
  • Monllau, J.C.
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Polycaprolactone scaffolds modified with cross-linked hyaluronic acid were prepared in order to establish whether a more hydrophilic and biomimetic microenvironment benefits the progenitor cells arriving from bone marrow in a cell- free tissue-engineering approach. The polycaprolactone and polycaprolactone/hyaluronic acid scaffolds were characterized in terms of morphology and water absorption capacity. The polycaprolactone and polycaprolactone/hyaluronic acid samples were implanted in a chondral defect in rabbits; bleeding of the subchondral bone was provoked to generate a spontaneous healing response. Repair at 1, 4, 12, and 24 weeks was assessed macroscopically using the International Cartilage Repair Society score and the Oswestry Arthroscopy Score and microscopically using immunohistological staining for collagen type I and type II, and for Ki-67. The presence of hyaluronic acid improves scaffold performance, which supports a good repair response without biomaterial pre-seeding., JLGR, JAGT and JCM acknowledge the support of the Spanish Ministry of Science through projects No. MAT2010-21611-C03-01 and -02. The support of Grant 2005SGR 00762 and 2005SGR 00848 (Catalan Department of Universities, Research and the Information Society) and the Red Tematica de Investigacion Cooperativa en Envejecimiento y Fragilidad (RETICEF) is also acknowledged. Myriam Lebourg acknowledges funding from UPV through the PAID-10 project funds and from CIBER-BBN. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The use of waterborne paints in contemporary murals: comparing the stability of vinyl, acrylic and styrene-acrylic formulations to outdoor weathering conditions

  • MELCHIORRE DI CRESCENZO, MARTA
  • Zendri, Elisabetta
  • Sánchez Pons, Mercedes|||0000-0003-4653-7885
  • Fuster-López, Laura|||0000-0001-7072-7190
  • Yusa Marco, Dolores Julia|||0000-0001-8207-3972
This paper reports on the photochemical degradation of waterborne paints, products which have been widely used in the production of outdoor contemporary murals. For this purpose, 15 artist-grade formulations, including three binders (poly(n-butyl acrylate-co-methyl methacrylate), poly(vinyl acetateco-vinyl versatate), poly(n-butyl methacrylate-co-styrene-co-2-ethylexyl acrylate)) and five pigments (titanium white, artificial ultramarine blue, mars yellow, quinacridone red, phthalocyanine green) were selected and brushed on cement lime mortar supports, simulating the stratified structure typically used by artists. Samples were exposed to UVA-340 lamps (295 < l < 370 nm) for 800 h, and changes in paint layer properties were monitored using Fourier transform infrared spectroscopy, colorimetric measurements, light and scanning electron microscopy. Thanks to this multi-analytical approach it was possible to study the relationship between chemical degradation experienced by polymer binders, changes in paint surface morphology and discoloration. The results confirmed photo-oxidative reactions undergone by the binding media, with acrylic and styrene-acrylic samples being more stable than the vinyl ones. The influence of pigments and extenders on the stability of polymers was also evaluated and it was observed that, regardless of binder typology, samples containing artificial ultramarine blue underwent the most evident degradation., Financial support from MIUR (Italian Ministry of Education and Research), Valencian Regional Government "I+D Generalitat Valenciana" (GV/2007/212, GV/2011/082), Research and Development Support Program of the Universitat Politecnica de Valencia (PAID-06-06-4720, PAID-00-07-2607, PAID-08-07-4466, PAID-06-10-2429) are gratefully acknowledged. The authors want to acknowledge M.T. Domenech-Carbo for providing analytical equipment (FTIR), M.L. Martinez-Bazan for providing colorimetric equipment, M. Planes Insausti and J.L. Moya-Lopez (Electron Microscopy Service-UPV) for technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Adding multiprocessor and mode change support to the Ada real-time framework

  • Sáez Barona, Sergio|||0000-0001-8970-6808
  • Real Sáez, Jorge Vicente|||0000-0001-7636-6672
  • Crespo, Alfons|||0000-0002-6606-7406
[EN] Based on a previous proposal of an Ada 2005 framework of real-time utilities, this paper deals with the extension of that framework to include support for multiprocessor platforms and multiple operating modes and mode changes. The design of the proposed framework is also intended to be amenable to automatic code generation., This work is partly funded by the Vicerrectorado de Investigacion of Universitat Politècnica de València under grant PAID-06-10-2397 and the Europan Commission’s OVERSEE project (FP7-ICT-2009-4, Project ID 248333).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of risk impact of consumers&apos, behaviour in terms of exposure to Listeria monocytogenes in lettuce

  • Doménech Antich, Eva Mª|||0000-0003-3560-6355
  • Conchado Peiró, Andrea|||0000-0001-5222-5218
  • Escriche Roberto, Mª Isabel|||0000-0003-0180-0360
The influence that consumers have on the exposure assessment due to the presence of Listeria monocytogenes in lettuce was studied. Four stages of the food chain were considered: transport home, storage, handling and washing. A survey provided information about family behaviour classified as: one adult living alone (n = 77), one adult with children (n = 21), two adults (n = 75), two adults with children (n = 139) and seniors (n = 157). Multiple correspondence analyses revealed only slight differences between one adult living alone (with or without children) and the other groups. The simulation results highlighted that in all groups, 'transportation' and 'storage at home' did not increase contamination. In the 'handling' stage, Listeria was able to increase an average of 1 log CFU g 1, and in 'washing', consumers were able to reduce it to the values at retail. Finally, sensitivity analysis demonstrated that washing and surface contamination were the practices that had most influence on the risk., This study was supported by the Universidad Politecnica de Valencia, Spain (PAID 06-10), which the authors gratefully acknowledge.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical treatment of solutions containing a recalcitrant dye: A way of using dimensionally adaptable catalytic fabrics

  • Del Río García, Ana Isabel
  • García, Carolina
  • Fernández Sáez, Javier
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
The objective of this work is to study the decolorization/degradation of reactive dye Remazol Black (RMZB) in sulfuric media. The electrochemical behavior was evaluated by cyclic voltammetry (CV) using platinum (Pt) and glassy carbon (GC) as working electrodes. Different electrolyses were performed potentioscally using Pt, activated carbon textile (ACT) and activated carbon textile electrocatalytically improved with dispersed Pt (Pt-ACT) with and without NaCl. The decolorization was studied by UV-visible spectroscopy. High performance liquid chromatography (HPLC) also permitted us to confirm the dye degradation. Specific applied charge (Q/Ah L-1) was evaluated and the efficiencies of the dye degradation were discussed in terms of electrical energy per order (E-EO/kWh m(-3) order(-1)). Field emission scanning electron microscopy (FESEM) was used to observe the morphological differences of a Pt-ACT electrode before and after the electrolyses, confirming that the corverage of dispersed Pt remains on the surface., The authors thank the Spanish Ministerio de Ciencia e Innovacion (contract CTM2011-23583) and Universitat Politecnica de Valencia (Vicerrectorado de Investigacion PAID-06-10 contract 003-233) for the financial support. A.I. del Rio is grateful to the Spanish Ministerio de Ciencia y Tecnologia for her FPI fellowship. J. Molina is grateful to the Conselleria d'Educacio, Formacio i Ocupacio (Generalitat Valenciana) for the Program VALi+D Postdoctoral Fellowship. C. Garcia is grateful to the Conselleria d'Educacio, Formacio i Ocupacio (Generalitat Valenciana) for her Geronimo Forteza fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Nuevos aceros TWIP/TRIP en los automóviles del futuro, New steels TWIP/TRIP in future automobiles

  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Sellés, M.A.|||0000-0002-0784-5757
  • Pla-Ferrando, R|||0000-0001-6688-9904
  • Peydro, M. A.|||0000-0002-8503-1505
[ES] El presente trabajo tiene por objeto introducir al lector en un grupo de materiales que prometen tener relevancia en la evolución de las estructuras de automóviles, y que probablemente cambien la forma de diseñar elementos resistentes. Se describen las propiedades más relevantes, Se justifican los beneficios medioambientales de su implantación. Finalmente se llega a las conclusiones que justifican su idoneidad para múltiples aplicaciones donde se requiera aumento de seguridad con disminución de peso., [EN] This paper aims to introduce the reader to a group of materials that promise to be relevant in the evolution of automotive structures, and probably change the way design elements resistant. It describes the most relevant properties. It justifies the environmental benefits of its implementation. Finally, conclusions are justifying their suitability for multiple applications requiring enhanced security with reduced weight., Este trabajo forma parte de un proyecto subvencionado por la Universitat Politècnica de València (PAID-06-10-003-305).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical characterization of reduced graphene oxide-coated polyester fabrics

  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
  • Fernández Sáez, Javier
  • Inés Vilches, Juan Carlos
  • Del Río García, Ana Isabel
Reduced graphene oxide (RGO) coated fabrics were obtained by chemical reduction of GO on polyester (PES) fabrics. Conducting fabrics that have different applications were obtained by applying several layers of RGO. Electrochemical techniques not traditionally used for the characterization of these materials were used to test their electrical and electrochemical properties. Electrochemical impedance spectroscopy was used to measure the electrical properties. The resistance of the original PES was more than 10(11) Omega cm(2), but when coated with three RGO layers, the resistance decreased to 23.15 Omega cm(2). Phase angles changed from 90 degrees for PES and PES-GO (capacitative behavior) to 0 degrees for all the RGO coated samples (resistive behavior). Electro-activity was measured by cyclic voltammetry (CV) and scanning electrochemical microscopy. An increase in electro-activity was observed when the inactive GO was reduced to RGO. With CV an increase of electro-activity was observed with an increasing number of RGO layers. The contact between the different RGO sheets is responsible for the electric conduction in the fabrics. The techniques used showed that with only one RGO coating, the contact between the RGO sheets is not good and more coatings were needed to assure good electrical and electrochemical properties. (C) 2013 Elsevier Ltd. All rights reserved., The authors wish to thank the Spanish Ministerio de Ciencia e Innovacion (contracts CTM2010-18842-C02-02 and CTM2011-23583) and Universitat Politecnica de Valencia (Vicerrectorado de Investigacion PAID-06-10 contract 003-233) for their financial support. J. Molina is grateful to the Conselleria d'Educacio, Formacio i Ocupacio (Generalitat Valenciana) for the Programa VALi+D post-doctoral fellowship. A.I. del Rio is grateful to the Spanish Ministerio de Ciencia y TecnologRia for the FPI fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Potential-pH Diagrams of Iron in Concentrated Aqueous LiBr Solutions at 25°C

  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Nachiondo Farinós, Teresa Del Montecarmelo|||0000-0002-0114-9603
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Vicent-Blesa, A.
[EN] Potential-pH diagrams of iron are developed in aqueous LiBr solutions with concentrations of 400 g/L, 700 g/L, 850 g/L, and 992 g/L LiBr at 25 degrees C, which are common concentrations in different parts of absorption machines. Comparison of the potential-pH diagrams of iron in the absence and the presence of concentrated aqueous LiBr solutions shows that the corrosion area at acid, neutral, and weak alkaline pH extends to lower potentials and higher pH values with the increase of LiBr concentration, as a result of formation of the aqueous species FeBr2(aq) and FeBr3(aq) and destabilization of the solid species Fe, Fe(OH)(2)(s), Fe3O4, and Fe2O3., The authors acknowledge the "Programa de Apoyo a la Investigacion y Desarrollo (PAID-06-10) de la UPV" for the support of this work, Antonio Juncos for his assistance in plotting the diagrams, and Dr. M. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of polypyrrole/phosphotungstate membranes by electrochemical impedance spectroscopy

  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Cases, Francisco|||0000-0001-8105-4489
  • Galvan, J. C.
The aim of this study was to design and prepare multifunctional PPy/PW12O403- membranes useful for the development of smart textile fabrics and wastewaters treatments based on the application of electrochemical techniques. These PPy/PW12O403- membranes have been characterized by means of electrochemical impedance spectroscopy by using electrochemical cells with different configurations based on the use of two-, three-, or four-electrode experiments. The activation energy of the films in the temperature range 35-70 degrees C was 170 meV. It has been demonstrated that after measuring the PPy films in different NaCl solutions, both the rate of ionic exchange and the diffusion processes through the membrane are faster for more concentrated solutions. Ionic exchange and diffusion were very prevented with a large cation as tetramethylammonium. The impedance spectra obtained with metal/polymer/electrolyte configuration show that the electrical conduction developed through coatings in strong acid solution is controlled by finite-length diffusion processes with reflective boundary conditions. At pH 13, the electrical response proceeds through the oxide layer (Fe and Cr oxides) and the steel/electrolyte interface. In this case, the polymeric coating is very porous due to the counter-ion disintegration. The decomposition of the counter-ion was corroborated by means of energy dispersive X-ray and Fourier transform infrared spectroscopy. (C) 2013 Elsevier B.V. All rights reserved., Authors thank to the Spanish Ministerio de Ciencia e Innovacion (contract CTM2011-23583) and Universitat Politecnica de Valencia (Primeros Proyectos de Investigacion (PAID-06-10)) for the financial support. J. Molina is grateful to the Conselleria d'Educacio, Formacio i Ocupacio (Generalitat Valenciana) for the Programa VALi+D Postdoctoral Fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Nonlinear focal shift beyond the geometrical focus in moderately focused acoustic beams

  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Jimenez, Noe|||0000-0002-6539-670X
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Adrián Martínez, Silvia
The phenomenon of the displacement of the position along the axis of the pressure, intensity, and radiation force maxima of focused acoustic beams under increasing driving voltages (nonlinear focal shift) is studied for the case of a moderately focused beam. The theoretical and experimental results show the existence of this shift along the axis when the initial pressure in the transducer increases until the acoustic field reaches the fully developed nonlinear regime of propagation. Experimental data show that at high amplitudes and for moderate focusing, the position of the on-axis pressure maximum and radiation force maximum can surpass the geometrical focal length. On the contrary, the on-axis pressure minimum approaches the transducer under increasing driving voltages, increasing the distance between the positive and negative peak pressure in the beam. These results are in agreement with numerical KZK model predictions and the existed data of other authors and can be explained according to the effect of self-refraction characteristic of the nonlinear regime of propagation., We wish to thank Dr. Yuri N. Makov for his advice and remarks for the improvement of this article. This work was supported by Universitat Politecnica de Valencia, under Project Nos. PAID-06-10-002-295 and PAID-05-11-002-340.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modelization of three-layered polymer coated steel-strip ironing process using a neural network

  • Sellés, M.A.|||0000-0002-0784-5757
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Segui Llinares, Vicente Jesús|||0000-0002-4043-2866
  • Reig-Pérez, Miguel Jorge|||0000-0003-0226-1194
  • Pla-Ferrando, R|||0000-0001-6688-9904
  • Schmid, Steven
[EN] An alternative to the traditional can manufacturing process is to use plastic laminated rolled steels as base stocks. This material consist of pre-heated steel coils that are sandwiched between one or two sheets of polymer. The heated sheets are then immediately quenched, which yields a strong bond between the layers. Such polymer-coated steels were investigated by Jaworski [1,2] and Sellés [3], and found to be suitable for ironing with carefully controlled conditions. A novel multi-layer polymer coated steel has been developed for container applications. This material presents an interesting extension to previous research on polymer laminated steel in ironing, and offers several advantages over the previous material (Sellés [3]). This document shows a modelization for the ironing process (the most crucial step in can manufacturing) done by using a neural network, This work was supported by the “Universitat Politècnica de València” [grant number PAID-06-10-003-305]
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Application of Nanofiltration and Reverse Osmosis Membranes for Tannery Wastewater Reuse

  • Fernandez-Medrano, Vilma
  • Cuartas Uribe, Beatriz Elena|||0000-0003-2835-900X
  • Bes-Piá, M.A.|||0000-0001-8005-7450
  • Mendoza Roca, José Antonio
[EN] Tanneries produce large amounts of wastewater with high concentrations of suspended solids, organic matter, and salts. Treatment and reuse of these effluents are of great importance to preserve water resources and save costs. Although suspended solids and high percentages of organic matter can be eliminated by physico-chemical and biological processes, refractory chemical oxygen demand (COD) and salts will remain in the wastewater after these processes. In particular, chloride and sulphate ion concentrations may hinder the treated wastewater from being reused or even discharged according to legal standards. In this work, two nanofiltration membranes and two reverse osmosis membranes are tested to assess these technologies as regeneration processes for biologically treated tannery wastewater. Permeate flux and rejection of organic matter and ions were measured at different operating conditions (transmembrane pressure and cross-flow velocities) at both total recycle and concentration modes. Results showed that the difference between permeate fluxes of nanofiltration (NF) membranes and reverse osmosis (RO) membranes was very high. Thus, at 20 bar and 1.77 m s¿1, the permeate flux of the two tested NF membranes in the total recycle mode experiments were 106 and 67 L m¿2 h¿1, while the obtained permeate fluxes for the RO membranes were 25 and 18 L m¿2 h¿1. Concerning rejections, RO membranes rejected almost 100% of the salts, whereas NF membranes reduced their rejection when faced with increasing concentration factors (salt rejection between 50¿60% at the highest concentration factor). In addition, the fouling of RO membranes was lower than that of NF membranes, recovering more than 90% of initial permeability by only water rinsing. In contrast, chemical cleaning was necessary to increase the permeability recovery of the NF membranes above 90%. The considerably lower rejections and the higher membrane fouling of the NF membranes lead us to conclude that reverse osmosis could be the most feasible technique for water reuse in the tannery industry, though the permeate fluxes are lower than those achieved with NF membranes., This research was funded by Universitat Politecnica de Valencia (project ref: PAID-06-10-2269).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Propagación no lineal de haces de ultrasonidos a través del cráneo para la apertura de la barrera hematoencefálica

  • Jimenez, Noe|||0000-0002-6539-670X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Redondo, Javier|||0000-0002-5507-7799
  • Roig, Bernardino|||0000-0002-9599-572X
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Marquet, Fabrice
  • Konofagou, Elisa E.
[EN] Focused ultrasound (FUS) techniques for BloodBrain Barrier opening are emerging for localized and safe brain drug delivery. The aim of this work is to study how the nonlinear effects of the acoustic wave through the transcranial propagation affect to the focused beam properties. In order to do that, a nonlinear acoustics computational method based on FDTD (fi nite differences in time domain) has been developed in a cylindrical axisymmetric coordinate system. The boundary conditions are derived from a CT (X-ray computed tomography) mapping over a Rhesus monkey (Macaca mulatta). The results show that the nonlinear transcranial propagation induces amplitude dependent variations that can change the treatment area (focal position and beamwidth) and effective gain., [ES] El empleo de haces de ultrasonidos focalizados para provocar la apertura de la barrera hematoencefálica es una técnica emergente y prometedora para la dosificación localizada y segura de fármacos en el sistema nervioso central. El objetivo de este trabajo es cuantifi car como afectan los efectos no lineales a las propiedades del haz ultrasónico durante la propagación transcraneal. Para ello se emplea un método computacional basado en diferencias finitas en dominio temporal (FDTD) desarrollado bajo un sistema de coordenadas cilíndrico axisimétrico. Las condiciones de contorno han sido derivadas de un mapeado 3D adquirido mediante tomografía axial computarizada sobre un cráneo de mono Rhesus (Macaca mulatta). Los resultados muestran como la propagación no lineal a través del cráneo provoca variaciones en el área bajo tratamiento (posición de la focal y ancho de haz) así como en la ganancia efectiva en función de la presión de entrada., Este trabajo ha sido desarrollado gracias al proyecto FIS2008-06024-C03-03 del Ministerio de Educación y Ciencia y al Programa de Apoyo a la Investigación y Desarrollo de la Universidad Politécnica de Valencia PAID06-10-002-295, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hydrolytic degradation of PLLA/PCL microporous membranes prepared by freeze extraction

  • Gaona, Luis Andrés
  • Perilla, Jairo Ernesto
  • Lebourg, Myriam Madeleine
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Poly(L-lactic acid) Poly(e-caprolactone) blends (PLLA/PCL) porous membranes were prepared by freeze extraction (a modification of freeze drying) with ratios 100/0, 80/20, 60/40, 40/60, 20/80, 0/100 in weight. Degradation of the membranes in phosphate buffer solution (PBS) up to 65 weeks was studied using weight loss measurements, high performance liquid chromatography (HPLC), differential scanning calorimetry (DSC), mechanical indentation, gel permeation chromatography (GPC), and scanning electron microscopy (SEM). Degradation rate as observed by weight loss and reduction of molecular weight and mechanical properties depended on the composition of the blends. In most blends the degradation was more prominent in the PLLA phase and was accompanied by consequent recrystallization that formed a crystalline phase with increased resistance to hydrolysis. Occurrence of such crystalline phases and degradation of intercrystalline domain led to formation of nearly monodisperse molecular weight populations. Membranes with only 20% PCL presented favorable behavior compared to pure PLLA membranes as reflected in a lower degradation rate and a limited loss of the mechanical properties. At the same time, degradation rate of 80/20 membranes was enhanced with respect to pure PCL, and membranes were stiffer than PCL membranes at all degradation times. This composition could thus be useful for use in tissue engineering for bone or cartilage applications., Luis Andres Gaona wishes to thank "Programa de Doctorados Nacionales 2009" of COLCIENCIAS (Departamento Administrativo de Ciencia, Tecnologia e Innovacion Colombia) and COOPEN Project (Colombia, Costa Rica, Panama and European Network) for supporting his PhD studies. Myriam Lebourg acknowledges UPV for funding through project PAID 06-10, and CIBER-BBN for funding her postdoc research. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. Jose Luis Gomez Ribelles acknowledges the support of the Spanish Ministry of Science and Innovation through MAT2010-21611-C03-01 (including the FEDER financial support) and funding in the Centro de Investigacion Principe Felipe in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III (Ministry of Science and Innovation). The authors wish also to thank the Microscopy Service and Instituto de Tecnologia Quimica of Universidad Politecnica de Valencia for useful help and advices.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced adhesion of polypyrrole/PW12O403- hybrid coatings on polyester fabrics

  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
  • Oliveira, F. R.
  • Souto, A. P.
  • Esteves, M. F.
[EN] Polyester fabrics have been treated with plasma to increase polypyrrole/PW12O403-(hybrid material) adhesion to its surface. With the plasma treatment, the roughness of the fibers increases as it has been observed by means of atomic force microscopy (AFM). Polar functional groups are also created on the surface of polyester fabrics as Xray photoelectron spectroscopy (XPS) measurements have shown. These polar groups contribute to the adhesion of polypyrrole to the fibers. Coatings obtained on plasma treated fabrics were more resistant to washing and rubbing fastness tests. The use of an inorganic counter ion (PW12O40 3-) that contains an element with a high atomic number (W) helps to locate zones where the coating is missed; this is achieved by means of micrographs obtained by backscattered electrons (BSE). The electrical resistance of the fabrics was also measured by electrochemical impedance spectroscopy (EIS), obtaining also better results with the plasma treated fabrics., Authors thank to the Spanish Ministerio de Ciencia e Innovacion (contracts CTM2010-18842-C02-02 and CTM2011-23583) and Universitat Politecnica de Valencia (Primeros Proyectos de Investigacion (PAID-06-10)) for the financial support. J. Molina is grateful to the Conselleria d'Educacio (Generalitat Valenciana) for the FPI fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A new reconstruction procedure in central schemes for hyperbolic conservation laws

  • Balaguer-Beser, Ángel|||0000-0003-0039-2641
This paper presents a new point value reconstruction algorithm based on average values or flux values for central Runge-Kutta schemes in the resolution of hyperbolic conservation laws. This reconstruction employs a fourth-order accurate approximation of point values of the solution at the two extrema and at the mid-point of each cell. These point values are modified in order to enforce monotonicity and shape preserving properties. This correction has been applied essentially in the cells close to the maxima and minima of the solution and in these cases, it has been proven that the reconstruction is fourth-order accurate. In the cells with a maximum or minimum of the solution, a correction has also been applied to such point values with the aim of ensuring that the resulting numerical solution has a non-oscillatory behavior. Several standard one- and two-dimensional test cases are used to verify high-order accuracy, non-oscillatory behavior and high-resolution properties for smooth and discontinuous solutions, and also in their componentwise extension to the Euler gas dynamics equations. © 2011 John Wiley & Sons, Ltd., I express my gratitude to the anonymous reviewers for their helpful comments. I thank Txomin Hermosilla for his suggestions. I thank the R & D & I Linguistic Assistance Office, Universidad Politecnica de Valencia (Spain), for translating this paper. This work is supported by Spanish Ministry of Education and Science under grant number CGL2009-14220-C02-01. This work was partially funded by the PAID-06-10 of the Polytechnic University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Energy Efficiency Improvement of Alkaline Water Electrolysis by using 3D Ni Cathodes Fabricated via a Double-Template Electrochemical Process

  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • González Buch, Cristina
[EN] Alkaline water electrolysis is one of the easiest methods for hydrogen production, offering the advantage of simplicity. Moreover, it represents an environmentally friendly technology for production of high purity hydrogen. Nevertheless, the elevated production costs due to low conversion efficiency and electrical power expenses can be named as the main drawbacks of electrochemical hydrogen production. This work is focused on the development and characterization of 3D porous Ni cathodes for alkaline electrolyzers. The electrodes were synthesized by nickel electrodeposition on copper foams obtained from hydrogen bubbles dynamic templates (double-template electrochemical process). The developed electrodes were characterized by SEM, confocal laser scanning microscopy, and EDX. The electrocatalytic performance of the developed electrodes for hydrogen evolution reaction (HER) was evaluated in 30 wt.% KOH solution by using hydrogen discharge curves and galvanostatic tests. Results show that the use of the developed electrodes as cathodes in electrolysis systems makes possible an energy saving of ca. 25% in conditions at which industrial alkaline water electrolysis is carried out, in comparison with the smooth commercial Ni electrodes., I. Herraiz-Cardona is grateful to Fundación Iberdrola for the financial support. This work was supported by Generalitat Valenciana (Project PROMETEO/2010/023) and Universitat Politècnica de València (PAID-06-10-2227).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Explicit finite-difference time-domain scheme for the simulation of 1-3 piezoelectric effect in axisymmetrical configurations

  • Ferri García, Marcelino
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Redondo, Javier|||0000-0002-5507-7799
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Avis, Mark R.
[EN] Numerical simulations are useful in the processes of design, development and optimization of transducers for non-destructive testing. In this work, a three-dimensional velocity-stress finite-difference model is presented for the elastic wave propagation in the piezoelectric substrate of a transducer excited by applying an impulsive voltage signal to the transducer electrodes. The allocation of the stress, velocity and electric field components on a staggered grid leads to a stable scheme. The different time scales of both mechanical and electromagnetic waves have leaded previous FDTD models to choose between significant physical simplifications or complicated implicit equations. The model presented here is explicit in all its time domain equations, contains only first order derivatives and is centered in time and space. The results of simulations show remarkable accuracy and stability for the different transducers studied. © 2012 Elsevier B.V., The authors want to thank Miquel Ardid, Víctor Sánchez and Bernardino Roig for their cooperation and fruitful discussions. This study was supported by the Programa de Apoyo a la Investigación y Desarrollo PAID-06-10-002-295 of Universidad Politécnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Study of long term fouling on cross flow ultrafiltration

  • Cantó Polo, Rocío Águeda
  • Vincent Vela, Maria Cinta|||0000-0001-8493-0165
  • Cuartas Uribe, Beatriz Elena|||0000-0003-2835-900X
  • Alvarez Blanco, Silvia
  • Lora-García, Jaime|||0000-0003-1699-5404
Ultrafiltration (UF) is a membrane technique whereby water and microsolutes are separated from macromolecules. It has several applications in wastewater treatment and it is also widely used in chemical and food industries. The main disadvantage of UF is membrane fouling, which causes a decline in permeate flux with time. As permeate flux decline highly increases the operation costs, the time-dependence of permeate flux has been studied in many occasions. Most of these studies use protein aqueous solutions (bovine serum albumin, hemoglobin, cheese whey among others) as feed. However, as proteins are charged molecules, they interact with the membrane and their interactions are influenced by the pH of the solution, so the models applied to these kinds of feed solutions should include membrane-solute interaction. When using polythylene glycol (PEG) these interactions may not be considered and the models are simplified., The authors of this work wish to acknowledge the financial support of the Universitat Politècnica de València throught the project "Primeros proyectos de Investigación: Programa de Apoyo a la Investigación y Desarrollo PAID-06-10" and the Spanish Ministry of Science and Innovation throught the project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dynamics of the family of c-iterative methods

  • Campos, B.
  • Vindel, P.
  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
In this paper, the dynamics of the family of c-iterative methods for solving nonlinear equations are studied on quadratic polynomials. A singular parameter space is presented to show the complexity of the family. The analysis of the parameter space allows us to find elements of the family that have bad convergence properties and also other ones with very stable behaviour. These schemes correspond to values of c in different small regions of the parameter space., Supported by Ministerio de Ciencia y Tecnologia MTM2011-28636-C02-02. The first and fourth authors were also partially supported by P11B2011-30 (Universitat Jaume I), the second and third authors were also partially supported by Vicerrectorado de Investigacion, Universitat Politecnica de Valencia PAID-06-2010-2285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Deferred setting of scheduling attributes in Ada 2012

  • Sáez Barona, Sergio|||0000-0001-8970-6808
  • Crespo, Alfons|||0000-0002-6606-7406
[EN] Some scheduling techniques, specially in multiprocessor systems, require changing several task attributes atomically to avoid scheduling errors and artifacts. This work proposes to incorporate the deferred attribute setting mechanism to cope with this problem in the next Ada 2012., This work was partially supported by the Vicerectorado de Investigacion of the Universidad Polit ´ ecnica de Valencia under grant PAID-06-10-2397 and European Project OVERSEE (ICT-2009 248333)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Accurate chromatic dispersion characterization of photonic integrated circuits

  • Mas Gómez, Sara María
  • Matres Abril, Joaquín
  • Oton Nieto, Claudio José
  • Martí Sendra, Javier
An accurate technique to characterize chromatic dispersion and its slope versus wavelength is reported. The method is based on a heterodyne Mach-Zehnder interferometer, which is immune to thermal phase noise by using a counterpropagating reference beam. Chromatic dispersion profiles are obtained over a broad wavelength region even in short waveguides with considerable loss. Conventional strip silicon waveguides as well as slotted geometries are considered. Theoretical simulations are also presented for comparison, which show good agreement with the experimental results., Manuscript received March 23, 2012; revised May 5, 2012; accepted May 7, 2012. Date of current version May 22, 2012. This work was supported by the Spanish Ministry of Science and Innovation through contracts SINADEC (TEC2008-06333) and DEMOTEC (TEC2008-06360), from Generalitat Valenciana through PROMETEO-2010-087 RD Excellence Program (NANOMET) and Universitat Politecnica de Valencia through PAID-06-10 project 1914. Corresponding author: S. Mas (e-mail: smasg@ntc.upv.es).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A new technique to obtain derivative-free optimal iterative methods for solving nonlinear equations

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Martínez Molada, Eulalia|||0000-0003-2869-4334
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Hueso Pagoaga, José Luís
A new technique to obtain derivative-free methods with optimal order of convergence in the sense of the Kung-Traub conjecture for solving nonlinear smooth equations is described. The procedure uses Steffensen-like methods and Pade approximants. Some numerical examples are provided to show the good performance of the new methods. (c) 2012 Elsevier B.V. All rights reserved., This research was supported by Ministerio de Ciencia y Tecnologia MTM2011-28636-C02-02 and by Vicerrectorado de Investigacion, Universitat Politecnica de Valencia PAID-06-2010-2285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

A phonetic-based approach to query-by-example spoken term detection

  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
  • Gomez, J.A.|||0000-0002-4174-3762
  • García-Granada, Fernando|||0000-0003-2213-4213
  • Sanchís Arnal, Emilio|||0000-0002-6737-4723
  • Calvo Lance, Marcos
Query-by-Example Spoken Term Detection (QbE-STD) tasks are usually addressed by representing speech signals as a sequence of feature vectors by means of a parametrization step, and then using a pattern matching technique to find the candidate detections. In this paper, we propose a phoneme-based approach in which the acoustic frames are first converted into vectors representing the a posteriori probabilities for every phoneme. This strategy is specially useful when the language of the task is a priori known. Then, we show how this representation can be used for QbE-STD using both a Segmental Dynamic Time Warping algorithm and a graph-based method. The proposed approach has been evaluated with a QbE-STD task in Spanish, and the results show that it can be an adequate strategy for tackling this kind of problems, Work partially supported by the Spanish Ministerio de Economía y Competitividad under contract TIN2011-28169-C05-01 and FPU Grant AP2010-4193, and by the Vic. d’Investigació of the UPV (PAID-06-10)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Brauer&apos, s theorem and related results

  • Bru García, Rafael
  • Cantó Colomina, Rafael|||0000-0002-1341-2800
  • Urbano Salvador, Ana María|||0000-0001-8590-1243
  • Soto, Ricardo L.
Given a square matrix A, a Brauer's theorem [Brauer A., Limits for the characteristic roots of a matrix. IV. Applications to stochastic matrices, Duke Math. J., 1952, 19(1), 75-91] shows how to modify one single eigenvalue of A via a rank-one perturbation without changing any of the remaining eigenvalues. Older and newer results can be considered in the framework of the above theorem. In this paper, we present its application to stabilization of control systems, including the case when the system is noncontrollable. Other applications presented are related to the Jordan form of A and Wielandt's and Hotelling's deflations. An extension of the aforementioned Brauer's result, Rado's theorem, shows how to modify r eigenvalues of A at the same time via a rank-r perturbation without changing any of the remaining eigenvalues. The same results considered by blocks can be put into the block version framework of the above theorem. © 2012 Versita Warsaw and Springer-Verlag Wien., This work is supported by Fondecyt 1085125, Chile, the Spanish grant DGI MTM2010-18228 and the Programa de Apoyo a la Investigacion y Desarrollo (PAID-06-10) of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hollow fiber membrane ultrafiltration of a simulated secondary treatment wastewater. Process and fouling modeling

  • Soler Cabezas, José Luis|||0000-0002-4610-3369
  • Vincent Vela, Maria Cinta|||0000-0001-8493-0165
  • Mendoza Roca, José Antonio
  • Martínez Francisco, Francisco Juan
[EN] It is well known that there is a scarcity of drinking and irrigation water around the world nowadays. According to the United Nations, water scarcity affects 1.2 billion people (one-fifth of the world's population) and the water use has been growing at twice the rate of population increase in the last century. This fact makes the reuse of the wastewater from municipal wastewater treatment plants (MWTPs) an interesting option. Ultrafiltration after the secondary settling is becoming more frequently used for wastewater reclamation and it has some advantages compared with conventional processes such as compact design and high quality of the final effluent (including microbiological parameters). However, membrane fouling aspects have to be more deeply studied in view to a more prolonged membrane life. For it, modeling of the process is of crucial importance. Thus, the effect of the operating conditions in the ultrafiltration membrane fouling has been reported by several authors in the bibliography (Wang et alter [1]). In this work, a hollow fiber membrane module has been applied to the ultrafiltration of a simulated secondary effluent from a MWTP. The water quality and the membrane fouling were investigated. This work is focused on the effect of transmembrane pressure and the cross-flow velocity on membrane permeability. In addition, in order to model the ultrafiltration fouling process, permeate flux versus time data has been fitted to a Belfort model., The authors of this work wish to gratefully acknowledge the financial support of the Universitat Politècnica de València through the project "Primeros Proyectos de Investigación: Programa de Apoyo a la investigación y Desarrollo PAID-069-10"
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The role of the consumer in the reduction of Listeria monocytogenes in lettuces by washing at home

  • Doménech Antich, Eva Mª|||0000-0003-3560-6355
  • Botella Grau, Mª Salud|||0000-0002-4254-7587
  • Ferrús Pérez, Mª Antonia
  • Escriche Roberto, Mª Isabel|||0000-0003-0180-0360
[EN] Lettuce is highly appreciated for its nutritional properties; however microbial contamination through the food chain and its raw consumption may jeopardize these known benefits to the diet. The objective of this study was to determine the role of the consumer at the stage of washing at home, in relation to the probability of illness due to the presence of Listeria monocytogenes in lettuce. Survival curves of L. monocytogenes after washing (dipping with and without addition of bleach, and washing under a running tap) were studied. A mathematical model for each washing method was calculated by fitting experimental data. The obtained models were used to estimate the probability of illness after washing at home. Results show that although consumers can only deal with low loads of L. monocytogenes, their role is essential to reduce the normal contamination level of lettuces and ensure their safety., This study was supported by the Universidad Politecnica de Valencia, Spain (PAID 06-10), which the authors gratefully acknowledge.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of sugar replacement by non-centrifugal sugar on physicochemical, antioxidant and sensory properties of strawberry and kiwifruit functional jams

  • Cervera-Chiner, Lourdes|||0000-0002-6895-4957
  • Barrera Puigdollers, Cristina|||0000-0003-4408-3541
  • Betoret Valls, Noelia|||0000-0002-3326-8797
  • Seguí Gil, Lucía|||0000-0002-2711-9445
[EN] Raw cane sugars have been claimed to be rich in natural phenolic compounds which, in contrast to refined sugar, may increase the nutritional value of foods and contribute to the development of healthier foods and diets. The use of non-refined cane sugars in food formulation seems an interesting option since they provide natural antioxidants with sucrose still being the major sugar present, minimizing the loss of technological properties. However, substitution of refined sugar could imply an undesired impact on physicochemical and sensory properties, conditioning consumer's acceptance. Functional jams (strawberry and kiwifruit) with a larger fruit to sugar ratio than conventional ones, in which white sugar was replaced by granulated jaggery (0, 15, 30, 45, 60 y 75 % w/w) were obtained. Impact of sugar replacement was assessed by evaluating physicochemical properties (moisture, water activity, pH, total soluble sugars, sugar profile (glucose, fructose, sucrose), and optical, rheological, mechanical and antioxidant properties). Sensory properties and microbiological stability were also determined. Jaggery improved the antioxidant properties of jams (total phenolic content, total flavonoid content, antiradical activity by the DPPH and ABTS methods), proportionally to the amount of cane sugar incorporated and more significantly in the case of kiwifruit. Other physicochemical properties were not significantly affected by jaggery, except for color. However, these differences were not crucial in the acceptability tests, since acceptance of jams containing jaggery was generally good, very good when intermediate replacement percentages were used. Conclusions of the present work suggest that granulated jaggery can be used to formulate sugar-rich food products such as jams in order to increase their nutritional value, with little impact on physicochemical properties and good consumer acceptance., This work was supported by Universitat Politecnica de Valencia (PAID-06-10-2420) and Generalitat Valenciana (GV/2013/047), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of PPy/PW12O403- organic-inorganic hybrid material on polyester yarns and subsequent weaving to obtain conductive fabrics

  • Romero, Eduardo
  • Del Río García, Ana Isabel
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
In this paper, we study the morphological, chemical and electrochemical characteristics of conductive fabrics obtained by weaving conductive yarns of polyester chemically coated with PPy (polypyrrole)/PW12O403-. The weaving process allows us to obtain conductive fabrics with higher dimensions than those traditionally obtained by in-situ chemical oxidation methods. Untwisted yarns and satin fabrics produced the most satisfactory results. The yarns of PES - PPy/PW12O403- as well as the fabric obtained after weaving, were chemically characterized by means of Fourier transform infrared spectroscopy with attenuated total reflection and energy dispersive X-ray. Scanning electron microscopy was employed to observe the morphology of the coating as well as the formation of defects during the weaving process. Electrochemical impedance spectroscopy was employed to measure the conductivity of the fabrics and the conductive nature by means of the phase angle. The process was satisfactory since the coating of polypyrrole was not excessively damaged by the weaving process, This work was supported by the Spanish Ministerio de Ciencia y Tecnologia and European Union Funds (FEDER) (grant number CTM2010-18842-C02-02); and Universidad Politecnica de Valencia (grant number PAID-06-10).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An agent-based genetic algorithm for hybrid flowshops with sequence dependent setup times to minimise makespan

  • Gómez-Gasquet, Pedro|||0000-0002-9184-6735
  • Andrés Romano, Carlos|||0000-0003-4453-4891
  • Lario Esteban, Francisco Cruz
This paper deals with a variant of flowshop scheduling, namely, the hybrid or flexible flowshop with sequence dependent setup times. This type of flowshop is frequently used in the batch production industry and helps reduce the gap between research and operational use. This scheduling problem is NP-hard and solutions for large problems are based on non-exact methods. An improved genetic algorithm (GA) based on software agent design to minimise the makespan is presented. The paper proposes using an inherent characteristic of software agents to create a new perspective in GA design. To verify the developed metaheuristic, computational experiments are conducted on a well-known benchmark problem dataset. The experimental results show that the proposed metaheuristic outperforms some of the well-known methods and the state-of-art algorithms on the same benchmark problem dataset., The translation of this paper was funded by Universidad Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Food Safety Objectives for Listeria monocytogenes in Spanish Food Sampled in Cafeterias and Restaurants

  • Doménech Antich, Eva Mª|||0000-0003-3560-6355
  • Escriche Roberto, Mª Isabel|||0000-0003-0180-0360
  • Amorós, J. A.
[EN] To gain more insight into the context of food safety management by public administrations, food safety objectives must be studied. The Valencian administration quantified the prevalence of Listeria monocytogenes in cafeterias and restaurants in this region of Spain between 2002 and 2010. The results obtained from this survey are presented here for 2,262 samples of fish, salad, egg, cold meat, and mayonnaise dishes. Microbiological criteria defined for L. monocytogenes were used to differentiate acceptable and unacceptable samples; more than 99.9% of the samples were acceptable. These findings indicate that established food safety objectives are achievable, consumer health at the time of consumption can be safeguarded, and food safety management systems such as hazard analysis critical control point plans or good manufacturing practices implemented in food establishments are effective. Monitoring of foods and food safety is an important task that must continue to reduce the current L. monocytogenes prevalence of 0.1% in restaurant or cafeteria dishes, which could adversely affect consumer health., The manuscript was supported by the project "Estudio de la influencia de los factores y agentes presentes en la cadena alimentaria sobre el valor del riesgo al que estan expuestos los consumidores debido a la presencia de Listeria monocytogenes en productos vegetales de IV gama" (PAID-06-10-2287) from the Universidad Politecnica de Valencia. This study was performed in collaboration with the General Director of Public Health of the Valencian Government Health Department. However, the views expressed here do not necessarily reflect the positions or policies of this Health Department. The authors are grateful to all inspectors from the Public Health Department of the Valencia Regional Government who participated in the monitoring program and thank the technicians of the Public Health Laboratory of Valencia Regional Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis and characterization of macroporous Ni, Co and NieCo electrocatalytic deposits for hydrogen evolution reaction in alkaline media

  • González Buch, Cristina
  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
In this work, macroporous Ni, Co and NieCo electrodes have been developed by codeposition at high current density on stainless steel (AISI 304) substrates. The obtained materials were characterized both morphologically and chemically by confocal laser scanning microscopy, and SEM coupled with EDX analysis. The activity for hydrogen evolution reaction (HER) on the obtained layers was assessed by using pseudo-steady-state polarization curves and electrochemical impedance spectroscopy (EIS) in alkaline solution (30 wt.% KOH). The electrochemical results show that HER on these electrodes takes place by the VolmereHeyrovsky mechanism. The synthesized coatings present higher catalytic activity for HER than commercial smooth Ni electrode. As the Co content increases in the electrodeposition bath the obtained structures show lower surface roughness factors. Ni eCo deposit with a Co content of 43 at.% manifests the highest intrinsic activity for HER as a consequence of the synergetic combination of Ni and Co., The authors acknowledge the support of Generalitat Valenciana (PROMETEO/2010/023) and Universidad Politecnica de Valencia (PAID-06-10-2227). I. Herraiz-Cardona is grateful to Fundacion Iberdrola for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of Ni-Mo, Ni-W and Ni-Co Macroporous Materials for Hydrogen Evolution Reaction

  • González Buch, Cristina
  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
[EN] The hydrogen evolution reaction (HER) is the cathodic process in many important electrochemical technologies. According to the Brewer intermetallyc bonding theory, molybdenum and tungsten were alloyed with nickel (hypo-hyper-d- electronic transition metal) in order to increase the intrinsic catalytic activity for HER. Cobalt was also combined with nickel to evaluate the effect of this metal in the intrinsic catalytic activity. In all the cases, electrodeposition at very high current densities provided macroporous materials of quasy-cylindrical pores due to the fact that the metallic deposition takes place simultaneously to the gas bubbling at high current densities. Morphology of the developed electrodes was characterized by confocal laser scanning microscopy, and HER on these electrodes was evaluated in 30 wt.% KOH solution by means of steady-state polarization curves and electrochemical impedance spectroscopy (EIS). Results show that the developed materials manifest higher apparent catalytic activity than that reported for a smooth commercial polycrystalline nickel electrode., This work was supported by Generalitat Valenciana (Project PROMETEO/2010/023) and Universitat Politècnica de València (PAID-06-10-2227). I. Herraiz-Cardona is grateful to Fundación Iberdrola for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Theoretical model of a multi-layered polymer coated steel-strip ironing process using a neural network

  • Sellés, M.A.|||0000-0002-0784-5757
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Pérez Bernabeu, Elena|||0000-0002-9221-7623
  • Reig-Pérez, Miguel Jorge|||0000-0003-0226-1194
  • Segui Llinares, Vicente Jesús|||0000-0002-4043-2866
  • Schmid, S. R.
An alternative to the traditional can manufacturing process is to use plastic laminated rolled steels as base stocks. This material consist of pre-heated steel coils that are sandwiched between one or two sheets of polymer. The heated sheets are then immediately quenched, which yields a strong bond between the layers. Such polymer-coated steels were investigated by Jaworski [1,2] and Sellés [3], and found to be suitable for ironing with carefully controlled conditions. A novel multi-layer polymer coated steel has been developed for container applications. This material presents an interesting extension to previous research on polymer laminated steel in ironing, and offers several advantages over the previous material (Sellés [3]). This document shows a modelization for the ironing process (the most crucial step in can manufacturing) done by using a neural network. © (2012) Trans Tech Publications., This work was supported by the “Universitat Politècnica de València” [grant number PAID-06-10-003-305]
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis and characterization of Au-modified macroporous Ni electrocatalysts for alkaline water electrolysis

  • González Buch, Cristina
  • Mestre, Sergio
  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
Au nanoparticles (Au-NPs) were successfully synthesized and incorporated into the surface of a macroporous Ni electrode fabricated via galvanostatic electrodeposition at high current densities in order to produce hydrogen by means of alkaline water electrolysis. The developed electrodes were morphologically characterized by means of confocal laser scanning and field emission scanning electron microscopes. The electrocatalytic behaviour towards the hydrogen evolution reaction was studied by Tafel polarization curves and electrochemical impedance spectroscopy. It was clear that enlarging the real surface area of an electrode its catalytic activity was greatly enhanced. This improvement was further increased when Au-NPs were added to the macroporous Ni surface. In this case, the improvement was not only caused by enlarging the surface area but also by an improvement in the intrinsic catalytic activity of the alloy, as it was shown by the exchange current densities values, calculated from the real surface area., The authors acknowledge the support of Generalitat Valenciana (PROMETEO/2010/023) and Universidad Politecnica de Valencia (PAID-06-10-2227).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Acoustic transmission through perforated plates with fractal subwavelength apertures

  • Gómez Lozano, Vicente|||0000-0002-4564-8287
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Belmar Ibáñez, Francisco|||0000-0003-4412-0007
The acoustic transmission response of plates perforated with fractal subwavelength holes array is studied. The Sierpinski Carpet pattern is used as fractal geometry. Ultrasound transmission spectra show that each iterative Sierpinski Carpet has the characteristic peaks and dips of the lattice constant of each array that formed the pattern. The angular dependency of the transmission coefficients shows a complex interplay between Fabry-Perot resonances, Wood anomaly minima and Lamb modes. (c) 2013 Elsevier Ltd. All rights reserved., This work has been supported by the Spanish MICINN (MAT2010-16879) and Universitat Politecnica de Valencia (PAID-06-10-1839).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Engineering surface waves in flat phononic plates

  • Estrada, Héctor
  • García de Abajo, F. Javier
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Belmar Ibáñez, Francisco|||0000-0003-4412-0007
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
Surface acoustic-wave phenomena span a wide range of length scales going from the devastation of earthquakes down to image reconstruction of buried nanostructures. In solid-fluid systems, the so-called Scholte-Stoneley waves (SSWs) dominate the scene at the interface with their evanescent fields decaying away into both media. Understanding and manipulating these waves in patterned surfaces would enable new applications of sound to be devised for imaging and acoustic signal processing, although this task has so far remained elusive. Here, we report SSW modes displaying directional gaps and band folding in fluid-loaded solid phononic plates. The plates are inhomogeneously patterned with in-plane periodic modulations of the elastic constants, but present flat surfaces free of corrugations. We experimentally demonstrate control of SSWs, which opens a promising route toward acoustic fluid sensing, microscopy, and signal processing., This work has been supported in part by the Spanish MICINN (MAT2010-16879, MAT2010-14885, Consolider CSD2007-00046, and NanoLight.es), the EU (NMP4-SL-2008-213669-ENSEMBLE), Generalitat Valenciana (PROM-ETEO 2010/043), and Universidad Politecnica de Valencia (PAID-06-10-1839). H.E. acknowledges financial support through JAE from CSIC. We thank B. Bonello for fruitful discussions. We gratefully acknowledge help from J. A. Garcia-Manrique, J. V. Giner, and I. Rodriguez in PP fabrication.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A taxonomy of web prediction algorithms

  • Domenech, Josep
  • De La Ossa Perez, Bernardo Antonio
  • Gil Salinas, José Antonio
  • Pont Sanjuan, Ana
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
Web prefetching techniques are an attractive solution to reduce the user-perceived latency. These techniques are driven by a prediction engine or algorithm that guesses following actions of web users. A large amount of prediction algorithms has been proposed since the first prefetching approach was published, although it is only over the last two or three years when they have begun to be successfully implemented in commercial products. These algorithms can be implemented in any element of the web architecture and can use a wide variety of information as input. This affects their structure, data system, computational resources and accuracy. The knowledge of the input information and the understanding of how it can be handled to make predictions can help to improve the design of current prediction engines, and consequently prefetching techniques. This paper analyzes fifty of the most relevant algorithms proposed along 15 years of prefetching research and proposes a taxonomy where the algorithms are classified according to the input data they use. For each group, the main advantages and shortcomings are highlighted. © 2012 Elsevier Ltd. All rights reserved., This work has been partially supported by Spanish Ministry of Science and Innovation under Grant TIN2009-08201, Generalitat Valenciana under Grant GV/2011/002 and Universitat Politecnica de Valencia under Grant PAID-06-10/2424.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sound transmission through plates perforated with two periodic subwavelength hole arrays

  • Estrada, Héctor
  • Meseguer Rico, Francisco Javier
  • Gómez Lozano, Vicente|||0000-0002-4564-8287
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Belmar Ibáñez, Francisco|||0000-0003-4412-0007
Theoretical results on sound transmission through plates perforated with compound periodic hole arrays are presented. Calculations are obtained by means of a model under the rigid-solid assumption, which is thoroughly derived. A complex interplay between resonant transmission peaks, resonance interference, and Wood anomaly minima is observed. At high frequencies the resonant peaks overcome the Wood anomaly dips, leading to a different behaviour when compared with simple hole arrays. © 2011 IOP Publishing Ltd., This work has been supported by the Spanish MICINN (MAT2010-16879), Generalitat Valenciana (PROMETEO 2010/043) and Universidad Politecnica de Valencia (PAID-06-10-1839). HE acknowledges the support of CSIC-JAEpredoc scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Morphological characterization of the cucumber (Cucumis sativus L.) collection of the COMAV&apos, s Genebank

  • Valcarcel Germes, José Vicente|||0000-0002-7843-703X
  • Peiró Barber, Rosa Mª|||0000-0002-3009-2343
  • Pérez De Castro, Ana María|||0000-0002-4949-3323
  • Díez Niclós, Mª José Teresa De Jesús
[EN] The cucumber (Cucumis sativus L.) is an important crop worldwide. In the present study the morphological characterization of 206 cucumber accessions, 195 from Spain and 11 outgroups from other countries, was carried out. One hundred and seventy-eight of them came from the COMAV's Genebank, 116 collected by the COMAV and the others 62 maintained at this institution as safety duplicates of the BGHZ collection. Seventeen more accessions supplied by BGHZ were included in the present research. Five plants per accession were characterized, with 17 qualitative and nine quantitative descriptors, eight of them referred to plant traits and 18 related to the fruit. Fruit descriptors were evaluated in at least 25 fruits per accession. The accessions were classified in five groups: 'White', 'Short', 'French', 'Long' and 'Very long', based on the morphology of their fruits and their similarity to commercial types. Principal Component Analysis showed that, with few exceptions, the accessions grouped to the previously established groups. Variability found among and within groups displayed the potential of these plant materials in breeding programs for different traits. The morphological characterization allowed the selection of the 67.2% of the collection, eliminating the most similar accessions., This work has been partially funded by the projects PAID-06-10-2408 (Universitat Politecnica de Valencia) and RFP2013-00011-00-00 (INIA, Ministerio de Ciencia e Innovacion). The authors acknowledge E. Solbes, J. Torres, E. Munoz and A. Rodriguez for their technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Programmable integrated front-end for SiPM/PMT PET detectors with continuous scintillating crystal

  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Monzó Ferrer, José María|||0000-0001-6554-3231
  • Aliaga, Ramón J.|||0000-0002-2513-7711
  • González Martínez, Antonio Javier
  • Colom Palero, Ricardo José|||0000-0003-0704-4906
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Ros García, Ana
  • Montoliu, C.
[EN] AMIC architecture has been introduced in previous works in order to provide a generic and expandable solution for implementing large number of outputs SiPM array/PMT detectors. The underlying idea in AMIC architecture is to calculate the moments of the detected light distribution in an analog fashion. These moments provide information about energy, x/y position, etc. of the light distribution of the detected event. Moreover this means that a small set of signals contains most of the information of the event, thus reducing the number of channels to be acquired. This paper introduces a new front-end device AMIC2GR which implements the AMIC architecture improving the features of the former integrated devices. Higher bandwidth and filtering coefficient precision along with a lower noise allow to apply some detector enhancements. Inhomogeneity among detector elements throughout the array can be reduced. Depth of interaction measurements can be obtained from the light distribution analysis. Also a common trigger signal can be obtained for the whole detector array. Finally AMIC2GR preamplifier stage close to SiPM output signals optimizes signal to noise ratio, which allows to reduce SiPM gain by using lower operating voltages thus reducing dark noise, This work was supported by Universitat Politecnica de Val ` encia ` through research program PAID06-10-2212.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Generating optimal derivative free iterative methods for nonlinear equations by using polynomial interpolation

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Martínez Molada, Eulalia|||0000-0003-2869-4334
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Hueso Pagoaga, José Luís
In this work we show a general procedure to obtain optimal derivative free iterative methods for nonlinear equations f (x) = 0, applying polynomial interpolation to a generic optimal derivative free iterative method of lower order. Let us consider an optimal method of order q = 2(n-1), v = phi(n)(x), that uses n functional evaluations. Performing a Newton step w = v - f(v)/f'(v) one obtains a method of order 2(n), that is not optimal because it introduces two new functional evaluations. Instead, we approximate the derivative by using a polynomial of degree n that interpolates n+1 already known functional values and keeps the order 2(n). We have applied this idea to Steffensen's method, obtaining a family of optimal derivative free iterative methods of arbitrary high order. We provide different numerical tests, that confirm the theoretical results and compare the new family with other well known family of similar characteristics. (C) 2012 Elsevier Ltd. All rights reserved., This research was supported by Ministerio de Ciencia e Innovacion MTM2011-28636-C02-02 and by Vicerrectorado de Investigacion. Universitat Politecnica de Valencia PAID-06-2010-2285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Computing survival functions of the sum of two independent Markov processes: an application to bladder carcinoma treatment

  • García Mora, María Belén|||0000-0002-4112-5411
  • Santamaria Navarro, Cristina|||0000-0002-8124-2831
  • Rubio Navarro, Gregorio
  • Pontones Moreno, José Luis
The study of the sum of two independent phase-type (PH)-distributed variables, each of them being asso- ciated with a Markovian process with one absorbing state, is considered in this paper. The distribution function of the variable sum is computed, obtaining a new PH-distributed function of higher order. As the order increases in the new function, the exponential function of a block upper triangular matrix is calculated in terms of its respective blocks to reduce the dimension of the problem. The obtained results are applied to bladder carcinoma data., This study has been funded by the Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia. Code 2406.