Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Stability of 3D-porous Ni/Cu cathodes under real alkaline electrolyzer operating conditions and its effect on catalytic activity

  • Valero Vidal, Carlos
  • Igual Muñoz, Anna Neus
  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
Despite the development and synthesis of new electrode materials for hydrogen generation in alkaline water electrolyzers has been a research topic widely exploited in the last years, stability tests on the obtained cathodes have been restricted to long-term potentiostatic/galvanostatic experiments which do not fulfil the real operating conditions that take place in those devices. In this work, two different Service Life Tests have been designed and implemented, aiming at including particular conditions (i.e. inverse polarity and short-circuit) in the durability and catalytic activity of cathode characterization. For this purpose, Ni/Cu bilayered porous electrodes were prepared using different Ni electrodeposition times (15, 30 and 45 min) following a double template electrochemical method. It has been confirmed that the electrode with the lowest Ni content can be considered as a promising electrocatalyst for hydrogen production under industrial conditions because of its optimal activity and stability after the two sets of testing conditions. In particular, electrochemical studies demonstrated that an inversion in polarity can positively affect the electrode performance, as a consequence of the synergetic interaction between CuO/Cu(OH)(2) and beta-Ni(OH)(2) species formed at potentials below the oxygen evolution domain., The authors gratefully acknowledge financial support given by the Generalitat Valenciana (PROMETEO/2010/023) and Spanish Government (Ministerio de Ciencia e Innovation) for the postgraduate grants AP2007-01243 (Carlos Valero-Vidal) and AP2007-03737 (Isaac Herraiz-Cardona).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessment of the roughness factor effect and the intrinsic catalytic activity for hydrogen evolution reaction on Ni-based electrodeposits

  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
The hydrogen evolution reaction (HER) was studied in 30 wt.% KOH solution at temperatures ranging between 30 and 80 °C on three type of electrodes: (i) rough pure Ni electrodeposits, obtained by applying a large current density; (ii) smooth NiCo electrodeposits; (iii) smooth commercial Ni electrodes. By using steady-state polarization curves and electrochemical impedance spectroscopy (EIS) the surface roughness factor and the intrinsic activities of the catalytic layers were determined. These techniques also permitted us to determine the mechanism and kinetics of the HER on the investigated catalysts. Different AC models were tested and the appropriate one was selected. The overall experimental data indicated that the rough/porous Ni electrode yields the highest electrocatalytic activity in the HER. Nevertheless, when the effect of the surface roughness was taken into consideration, it was demonstrated that alloying Ni with Co results in an increased electrocatalytic activity in the HER when comparing to pure Ni. This is due to an improved intrinsic activity of the material, which was explained on the basis of the synergism among the catalytic properties of Ni (low hydrogen overpotential) and of Co (high hydrogen adsorption)., Isaac Herraiz-Cardona is grateful to the Ministerio de Ciencia e Innovacion (Spain) for a postgraduate grant (Ref. AP2007-03737). This work was supported by Generalitat Valenciana (Project PROMETEO/2010/023)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Double-template fabrication of three-dimensional porous nickel electrodes for hydrogen evolution reaction

  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Vázquez-Gómez, Lourdes
[EN] Three-dimensional (3D) porous nickel structures were fabricated via a double-template electrochemical deposition process. The construction of the foam structures was achieved by means of a hydrogen bubble dynamic template, prepared from Cu electrodeposition at high current densities. Subsequently, a Ni layer was electrodeposited on the Cu 3D template. During the nickel coating, the typical finger-like microstructure of the Cu foam becomes denser and changes to a cauliflower microstructure. The hydrogen evolution reaction (HER) on these macroporous Ni electrodes was evaluated in 30 wt.% KOH solution by means of polarization curves and electrochemical impedance spectroscopy (EIS). Results demonstrate greater apparent activity of the developed electrodes towards HER in comparison with commercial smooth Ni electrode. The 3D porous Ni electrocatalyst obtained from Cu templates synthesized at the lowest current density and the highest electrodeposition time yielded the best electrochemical activity for HER. © 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved., Isaac Herraiz-Cardona is grateful to the Ministerio de Educacion (Spain) for a postgraduate grant (Ref. AP2007-03737). This work was supported by Generalitat Valenciana (PROMETEO/2010/023) and Universidad Politecnica de Valencia (PAID-06-10-2227).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The HER in alkaline media on Pt-modified three-dimensional Ni cathodes

  • Fiameni, Stefania
  • Musiani, Marco
  • Vázquez-Gómez, Lourdes
  • Verlato, Enrico
  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
[EN] Electrodeposited porous Ni layers and commercial Ni foams were submitted to spontaneous deposition of Pt, achieved by immersing the Ni substrates in H2PtCl6 solutions, at open circuit, to produce Pt-modified 3D Ni electrodes. When using Ni foams, the immersion was prolonged until the whole amount of H2PtCl6 in the solution had reacted. Such an approach, which granted an easy control of the Pt loading, could not be used for Ni trodeposits, since they underwent significant corrosion. The true Pt surface area was determined by measuring, for each electrode, the hydrogen desorption charge according to methods described in the literature. The ratios between Pt surface area and Pt loading were higher for Ni foam electrodes than for porous Ni electrodeposits. Both kinds of Pt-modified Ni electrodes were used as cathodes for hydrogen evolution in 1 M KOH. Cathodes with Pt loading below 0.5 mg cm(-2) (referred to geometric surface area) evolved hydrogen at -100 mA cm(-2) with a -75 mV overpotential. The better activity of foam electrodes as compared to electrodeposits, especially at low Pt loading, was mainly due to their higher Pt surface area per unit Pt mass. Copyright (C) 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved., The authors from IENI-CNR acknowledge the financial support of the Italian Ministry for Economic Development (MSE) - MSE-CNR Agreement on National Electrical System. I. Herraiz-Cardona is grateful to the Ministerio de Educacion of Spain for a post-graduate grant (Ref. AP2007-03737). The authors are indebted to Dr. Arianna Gambirasi, ICIS CNR, Padova, Italy for recording SEM images and to FILA INDUSTRIA CHIMICA SPA, San Martino di Lupari, Padova, Italy, owner of the Fei-ESem FEI Quanta 200 FEG instrument, for allowing its use for the research work described in this article.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical characterization of a NiCo/Zn cathode for hydrogen generation

  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Vázquez-Gómez, Lourdes
[EN] Hydrogen is considered to be the most promising candidate as a future energy carrier. One of the most used technologies for the electrolytic hydrogen production is alkaline water electrolysis. However, due to the high energy requirements, the cost of hydrogen produced in such a way is high. In continuous search to improve this process using advanced electrocatalytic materials for the hydrogen evolution reaction (HER), high area NiCo/Zn electrodes were prepared on AISI 304 stainless steel substrates by electrodeposition. After preparing, the alloys were leached of to remove part of the zinc and generate a porous layer (type Raney electrodes). The presence of a thin Ni layer between the substrate and the Raney coating favour the adherence of the latter. The porous NiCo/Zn electrode was characterized by SEM, EDX, confocal laser microscopy, and electrochemical impedance spectroscopy. HER on this electrode was evaluated in 30 wt.% KOH solution by means of polarization curves, hydrogen discharge curves, and galvanostatic tests. Results show that the developed electrode presents a most efficient behaviour for HER when comparing with the smooth Ni cathode. The high electrode activity was mainly attributed to the high surface area of the developed electrode. © 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved., Isaac Herraiz-Cardona is grateful to the Ministerio de Ciencia e Innovacion (Spain) for a postgraduate grant (Ref. AP2007-03737). This work was supported by Generalitat Valenciana (Project PROMETEO/2010/023).