Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Looking through the mirror: Optical microcavity-mirror image photonic interaction

  • Shi, Lei
  • Xifre Perez, Elisabet
  • Garcia de Abajo, Javier
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
[EN] Although science fiction literature and art portray extraordinary stories of people interacting with their images behind a mirror, we know that they are not real and belong to the realm of fantasy. However, it is well known that charges or magnets near a good electrical conductor experience real attractive or repulsive forces, respectively, originating in the interaction with their images. Here, we show strong interaction between an optical microcavity and its image under external illumination. Specifically, we use silicon nanospheres whose high refractive index makes well-defined optical resonances feasible. The strong interaction produces attractive and repulsive forces depending on incident wavelength, cavity-metal separation and resonance mode symmetry. These intense repulsive photonic forces warrant a new kind of optical levitation that allows us to accurately manipulate small particles, with important consequences for microscopy, optical sensing and control of light by light at the nanoscale. (C) 2012 Optical Society of America, L. Shi thanks the financial support from the MICINN (Estancias de profesores e investigadores extranjeros en centros espanoles) fellowship program. The authors acknowledge financial support from the following projects FIS2009-07812, Consolider 2007-0046 Nanolight, MAT2010-14885, the EU (NMP4-SL-2008-213669-ENSEMBLE), and the PROMETEO/2010/043.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sound transmission through perforated plates with subwavelength hole arrays: a rigid-solid model

  • Estrada, Héctor
  • García de Abajo, F. Javier
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Belmar Ibáñez, Francisco|||0000-0003-4412-0007
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
We present, a model to calculate sound transmission through plates perforated with periodically distributed subwavelength holes. Measurements performed using aluminium-perforated plates immersed in water are compared to predictions obtained with the calculation model. The calculated results agree well with experimental ones. It is also showed, both experimentally and numerically, that the number of the transmission peaks, related to the Fabry-Perot resonances, depends on the plate thickness. Finally the existence of a transmission dip, when the water wavelength is equal to the array period, is a manifestation of the Wood anomaly. (C) 2010 Elsevier B.V. All rights reserved., This work has been supported by the Spanish MICINN (MAT2007-66050 and NanoLight.es) and the EU (NMP4-SL-2008-213669-ENSEMBLE). H. E. acknowledges the support of CSIC-JAEpredoc scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Engineering surface waves in flat phononic plates

  • Estrada, Héctor
  • García de Abajo, F. Javier
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Belmar Ibáñez, Francisco|||0000-0003-4412-0007
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • MESEGUER RICO, FRANCISCO JAVIER|||0000-0002-5541-9912
Surface acoustic-wave phenomena span a wide range of length scales going from the devastation of earthquakes down to image reconstruction of buried nanostructures. In solid-fluid systems, the so-called Scholte-Stoneley waves (SSWs) dominate the scene at the interface with their evanescent fields decaying away into both media. Understanding and manipulating these waves in patterned surfaces would enable new applications of sound to be devised for imaging and acoustic signal processing, although this task has so far remained elusive. Here, we report SSW modes displaying directional gaps and band folding in fluid-loaded solid phononic plates. The plates are inhomogeneously patterned with in-plane periodic modulations of the elastic constants, but present flat surfaces free of corrugations. We experimentally demonstrate control of SSWs, which opens a promising route toward acoustic fluid sensing, microscopy, and signal processing., This work has been supported in part by the Spanish MICINN (MAT2010-16879, MAT2010-14885, Consolider CSD2007-00046, and NanoLight.es), the EU (NMP4-SL-2008-213669-ENSEMBLE), Generalitat Valenciana (PROM-ETEO 2010/043), and Universidad Politecnica de Valencia (PAID-06-10-1839). H.E. acknowledges financial support through JAE from CSIC. We thank B. Bonello for fruitful discussions. We gratefully acknowledge help from J. A. Garcia-Manrique, J. V. Giner, and I. Rodriguez in PP fabrication.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of lattice symmetry on ultrasound transmission through plates with subwavelength aperture arrays

  • Estrada, Héctor
  • Candelas, Pilar
  • Uris, Antonio
  • Belmar, Francisco
  • García de Abajo, Francisco Javier
  • Meseguer, Francisco
3 pages, 2 figures, 1 table., We study the transmission of sound waves through aluminum plates perforated with square and triangular hole arrays. We demonstrate both theoretically and experimentally that lattice symmetry affects the position of the Wood anomalies and the width of the transmission peaks. The angle and frequency dependence of sound transmission through perforated plates are thoroughly discussed. Finally, we observe unexpected anisotropic behavior in the long-wavelength Lamb-mode bands of perforated plates., This work has been supported by the Spanish MICINN (Grant Nos. MAT2006-03097 and MAT2007-66050 and NanoLight.es)and the EU (Grant No. NMP4-SL-2008-213669-ENSEMBLE). H.E. acknowledges a CSIC-JAE scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Power transfer between neighboring planar waveguides

  • Bendaña, X. M.
  • García de Abajo, Francisco Javier
The ability to control light over very small distances is a problem of fundamental importance for a vast range of applications in communications, nanophotonics, and quantum information technologies. For this purpose, several methods have been proposed and demonstrated to confine and guide light, for example in dielectric and surface plasmon polariton (SPP) waveguides. Here, we study the interaction between different kinds of planar waveguides, which produces dramatic changes in the dispersion relation of the waveguide pair and even leads to mode suppression at small separations. This interaction also produces a transfer of power between the waveguides, which depends on the gap and propagation distances, thus providing a mechanism for optical signal transfer. We analytically study the properties of this interaction and the power transfer in different structures of interest including plasmonic and particle-array waveguides, for which we propose an experimental realization of these ideas. © 2012 Optical Society of America., We acknowledge support from the European Union (NMP4-2006-016881-SPANS, FP7- ICT-2009-4-248855-Nanophotonics4Energy, FP7-ICT-2009-4-248909-LIMA and NMP4-SL- 2008-213669-ENSEMBLE) and the Spanish MICINN (MAT2010-14885 and Consolider NanoLight.es). X.M.B. acknowledges a JAE scholarship from CSIC., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

LiF - rare earth fluoride systems - potential novel polaritonic materials: Material preparation and phase diagram studies

  • Klimm, D.
  • Santos, Ivanildo A. dos
  • Godoy Nakamura, G. H. de
  • Acosta, M. F.
  • Merino, R. I.
Trabajo presentado a la "3rd International Conference on Metamaterials, Photonic Crystals and Plasmonics" celebrada del 19 al 22 de Abril del 2012 en Paris., Most systems consisting of LiF and REF3 (RE: rare earth) possess a eutectic between LiF and an intermediate compound RELiF4. This eutectic shows upon crystallization ordering that could be useful for its application as metamaterial. Aspects of material preparation, phase diagram studies, and the growth of self-organized eutectic structures are reported., The authors acknowledge financial support from the European Community (ENSEMBLE NMP4-13SL-2008-213669), CNPq (477595/2008-1; 290111/2010-2) and DAAD/CAPES (po-50752632)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Excitation of confined modes on particle arrays

  • Bendaña, X. M.
  • Lozano, Gabriel
  • Pirrucio, G.
  • Gómez-Rivas, J.
  • García de Abajo, Francisco Javier
We describe both theoretically and experimentally the existence and excitation of confined modes in planar arrays of gold nanodisks. Ordered 2D lattices of monodispersive nanoparticles are manufactured, embedded in a silica matrix, and exposed to evanescent prism-coupling illumination, leading to dark features in the reflectivity, which signal the presence of confined modes guided along the arrays. We find remarkable agreement between theory and experiment in the frequency-momentum dispersion of the resonances. Direct excitation of these modes reveals long propagation distances and deep extinction features. This combined experimental and theoretical characterization of guidedmodes shows a good understanding of the optical response of metallic particles arrays, which can be beneficial in future designs of optical-signal and distant-sensing applications. © 2013 Optical Society of America., This work has been supported in part by the European Union (NMP4-2006-016881-SPANS, NMP4-SL-2008-213669-ENSEMBLE,FP7-ICT-2009-4-248909-LIMA, and FP7-ICT-2009-4-248855-N4E), the Spanish MEC (MAT2010-14885 and Consolider Nano-Light.es), and the research program of the Foundation for Fundamental Research on Matter (FOM), which is financially supported by the Netherlands Organization for Fundamental Research (NWO) and is part of an industrial partnership program between Philips and FOM. It is also supported in part by NanoNextNL, a micro and nanotechnology consortium of the Government of the Netherlands and 130 partners. X.M.B. acknowledges a Spanish CSIC-JAE grant., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modelling X-ray scattering factors from fluids of some fluorinated molecules and related compounds

  • Forte, Giuseppe
  • Oliva, José M.
  • Balaban. Alexandru T.
  • Klein, Douglas J.
  • March, Norman H.
There is current interest, both for basic science and technological applications, in fluorocarbons such as CF 4 and the related molecules. Here we first report a Hartree-Fock calculation of the ground-state electron density in the octahedral molecule SF 6 using the experimentally determined bond length. From this density, the number of electrons lying inside a sphere of radius r, denoted by Q(r), centred on the S nucleus has been extracted. The X-ray scattering factor f(k) is then modelled using Q(r) and compared with f(k) for the isoelectronic united atom ytterbium. The molecule CF 4, together with its isoelectronic partners PF 3, CrF 2 and AsF, is again compared with regard to f(k) with the united atom Mo. Finally, interest in modelling PbF is pointed out, in relation to the quantum-chemical theory already available. © 2012 Copyright Taylor and Francis Group, LLC., JMO acknowledges support from European Union projects FP7-ICT-2009-4-248909-LIMA, FP7-ICT-2009-4-248855-N4E, NMP4–SL–2008–213669–ENSEMBLE and Dirección General de Universidades e Investigación de la Comunidad de Madrid under Grant No. S2009/ESP/1691 and Program MODELICO-CM. DJK thanks the Welch Foundation for financial support (BD-0894). A.T. Balaban thanks the Welch Foundation for financial support (BD-0046)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New polaritonic materials in the THz range made of directionally solidified halide eutectics

  • Merino, R. I.
  • Acosta, M. F.
  • Orera, V. M.
Directionally Solidified Eutectics: Selected Papers from DSEC IV., Directionally solidified alkali halide binary eutectics have been recently proposed as THz polaritonic metamaterials based on their ordered microstructure and the suitable phonon–polariton resonances in the THz range of the spectrum. In the present work we focus on the search of new available eutectic systems both binary and ternary eutectics with well-ordered fibrous or lamellar microstructures and interparticle distances from 1 to several tens of microns. Simple effective homogenization models have been used to calculate effective permittivity and transmittance in the THz range of eutectic slices. This lets us identify the electromagnetic spectral ranges where hyperbolic dispersion is expected together with a significant transmittance value. The hyperbolic dispersion range shifts with microstructure size, that is, with growth parameters, showing that the materials response can be finely tuned by the manufacture conditions. Applications with these materials cover the electromagnetic range from 5 to 20 THz., Authors would like to acknowledge the financial support by EU under the project NMP4-SL-2008-213669-ENSEMBLE. MFA acknowledges Ministerio de Educación, Cultura y Deporte (Spain) for the FPU scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Directional solidification of the eutectic LiF–LiYF4 using Bridgman and micro-pulling down techniques: Microstructural study and some properties

  • Acosta, M. F.
  • Ganschow, Steffen
  • Klimm, D.
  • Serrano-Zabaleta, S.
  • Larrea, Ángel
  • Merino, R. I.
Directionally Solidified Eutectics: Selected Papers from DSEC IV., The eutectic LiF–LiYF4 has been solidified by Bridgman and micro-pulling down (mPD) at pulling rates from 4 to 300 mm/h. The microstructure changes from a coupled, interpenetrated-like one to macrofaceted colonies composed of an approximately triangular arrangement of LiF fibers inside the LiYF4 matrix as the pulling rate increases. The cross-over pulling rate is around 3 times larger for the mPD method, corresponding to its larger solidification gradient. The crystallographic growth direction of the matrix phase was found using EBSD. Effective medium estimations of the THz permittivity of the composite predict around the interphase phonon-polariton resonance (wavelength around 17.5 μm) a small permittivity hyperbolic behavior specific of the ordered composite that is tolerant to different relative orientations. Water etching of polished cross-sections constitutes a very simple procedure to generate surface micro-holes of predefined size in the LiYF4 matrix., Authors would like to acknowledge the financial support by EU under the project NMP4-SL-2008-213669-ENSEMBLE. MFA acknowledges Ministerio de Educación, Cultura y Deporte (Spain) for the FPU scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Growth of self organized eutectic fibers from LiF-rare earth fluoride systems

  • Klimm, D.
  • Acosta, M. F.
  • Santos, Ivanildo A. dos
  • Ranieri, Izilda M.
  • Ganschow, Steffen
  • Merino, R. I.
Trabajo presentado al 2012 MRS Fall Meeting & Exhibit, celebrado del 25 al 30 de noviembre en Boston (US).-- arXiv:1301.6088, Eutectic fibers consisting of an ordered arrangement of LiF fibrils inside a LiREF4 matrix (RE = Y, Gd) can be grown with the micro-pulling-down method at sufficiently large pulling rate exceeding 120 mm/h. The distance between individual fibrils could be scaled down to 1 µm at 300 mm/h pulling. LiF-LiYF4 has stronger tendency to form facetted eutectic colonies than LiF-LiGdF4, explained by the larger entropy of melting of the former., This work received financial support from the European Union (7th Framework Programme, “ENSEMBLE”, NMP4-SL-2008-213669), from CNPq (477595/2008-1; 290111/2010-2) and from DAAD-CAPES (po-50752632). MFA acknowledges Ministerio de Educación, Cultura y Deporte (Spain) for the FPU scholarship., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Superplastic deformation of directionally solidified nanofibrillar Al2O3-Y3Al5O12-ZrO2 eutectics

  • Pastor, José Y.
  • Martín, Antonio
  • Molina-Aldareguia, Jon
  • Llorca-Martínez, F. Javier
  • Oliete, Patricia B.
  • Larrea, Ángel
  • Peña, J. I.
  • Orera, V. M.
  • Arenal, Raúl
Nanofibrillar Al2O3-Y3Al5O12-Zr O2 eutectic rods were manufactured by directional solidification from the melt at high growth rates in an inert atmosphere using the laser-heated floating zone method. Under conditions of cooperative growth, the ternary eutectic presented a homogeneous microstructure, formed by bundles of single-crystal c-oriented Al2O3 and Y3Al5O12 (YAG) whiskers of ≈100nm in width with smaller Y2O3-doped ZrO2 (YSZ) whiskers between them. Owing to the anisotropic fibrillar microstructure, Al2O3-YAG-YSZ ternary eutectics present high strength and toughness at ambient temperature while they exhibit superplastic behavior at 1600K and above. Careful examination of the deformed samples by transmission electron microscopy did not show any evidence of dislocation activity and superplastic deformation was attributed to mass-transport by diffusion within the nanometric domains. This combination of high strength and toughness at ambient temperature together with the ability to support large deformations without failure above 1600K is unique and shows a large potential to develop new structural materials for very high temperature structural applications. © 2013 Elsevier Ltd., The financial support from the Spanish Government under grant MAT 2009-13979, by the European Community under project ENSEMBLE NMP4-SL-2008-213669 and by the Comunidad de Madrid through the program ESTRUMAT-CM (S2009/MAT-1585) is gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Microestructura y propiedades mecánicas de fibras cerámicas eutécticas Al2O3/Er3Al5O12/ZrO2 procesadas por fusión zonal por laser

  • Mesa, M. Cristina
  • Oliete, Patricia B.
  • Larrea, Ángel
  • Orera, V. M.
  • Pastor, José Y.
  • Martín, Antonio
  • Llorca-Martínez, F. Javier
Trabajo presentado al XI Congreso Nacional de Materiales celebrado en Zaragoza del 23 al 25 de junio de 2010., Se han estudiado las fibras eutécticas Al2O3-Er3Al5O12-ZrO2 procesadas por fusión zonal por láser a distintas velocidades. Con el aumento de la velocidad de procesado se ha observado un afinamiento de la microestructura así como un cambio en la morfología de la misma. Se ha determinado mediante piezoespectroscopía que la fase alúmina se encuentra a compresión como consecuencia de las tensiones residuales que aparecen en la solidificación tras el fundido. El módulo de la componente hidrostática de dichas tensiones residuales se reduce conforme lo hace el tamaño de las fases. Se ha estudiado la dureza, la tenacidad de fractura y la resistencia a la flexión. Las dos primeras magnitudes han resultado independientes del tamaño de las fases, mientras que la resistencia a la flexión aumenta conforme disminuye el tamaño de las mismas. Finalmente, también se ha estudiado la dependencia de la resistencia a la flexión con la temperatura, observándose un comportamiento superplástico a 1700K para la fibra procesada a mayor velocidad., Los autores agradecen la financiación del Ministerio de Educación y Ciencia y a la fundación FEDER de la Comunidad Europea a través del proyecto MAT2009-13979-C03-03 MAT2009 y de la Comunidad Europea a través del proyecto NMP4-SL-2008-213669. Los autores quieren agradecer también al Servicio de Microscopia Electrónica (Servicios de Apoyo a la Investigación), Universidad de Zaragoza. M. C. Mesa agradece al Gobierno de Aragón por la beca concedida., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Micropillar Templates for Dielectric Filled Metal Arrays and Flexible Metamaterials

  • Acosta, M. F.
  • Rodrigo, Sergio G.
  • Martín-Moreno, Luis
  • Pecharromán, Carlos
  • Merino, R. I.
Arrays of holey metal films with dielectric or polaritonic micropillars filling or towering over the holes are prepared using templates from directionally solidified eutectics. The structures can be flexible and show localized enhanced optical transmittance and absorption induced transparency (AIT) in the near-infrared or THz ranges. This is the first time that AIT is experimentally demonstrated at THz frequencies., Funds received from the EU through Grant No. NPM4-SL-2008-213669 (ENSEMBLE) and from the Spanish MINECO under Contract Nos. EMITEME-MAT2013-4105-R and MAT2014-53432-C5-1-R are acknowledged. M.F.A. thanks the Spanish MEC for the FPU scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solidification of NaCl–LiF–CaF2 ternary composites

  • Acosta, M. F.
  • Merino, R. I.
  • Ganschow, Steffen
  • Klimm, D.
The purpose of this work is to refine the microstructure of eutectic halides, candidates to polaritonic metamaterials, through the directional solidification of ternary compositions. NaCl–LiF–CaF2 ternary composites have been solidified using Bridgman and micro-pulling-down techniques at pulling rates from 3 to 300 mm/h for the first time. The interparticle spacing is 12% smaller for this composition than for the binary fibrous NaCl–LiF eutectic. Conditions for solidification and growth in order to generate ternary aligned microstructures are discussed. The very small amount of melt remaining in the mixtures until 580∘C is probably the consequence of solid solubility of LiCl in NaCl and the formation of the reciprocal salt pairs, as in NaCl–LiF. However, it does not prevent the solidification of homogenous ternary microstructures., Authors would like to acknowledge the financial support by EU under the Project NMP4-SL-2008-213669-ENSEMBLE and MAT2013-41045R. MFA acknowledges Ministerio de Educación, Cultura y Deporte (Spain) for the FPU scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Plasmon spectroscopy and imaging of individual gold nanodecahedra: A combined optical microscopy, cathodoluminescence, and electron energy-loss spectroscopy study

  • Myroshnychenko, Viktor
  • Nelayah, J.
  • Adamo, G.
  • Geuquet, N.
  • Rodríguez-Fernández, Jessica
  • Pastoriza-Santos, Isabel
  • MacDonald, K. F.
  • Henrard, Luc
  • Liz-Marzán, Luis Manuel
  • Zheludev, N.I.
  • Kociak, Mathieu
  • García de Abajo, Francisco Javier
9 pags, 6 figs, Imaging localized plasmon modes in noble-metal nanoparticles is of fundamental importance for applications such as ultrasensitive molecular detection. Here, we demonstrate the combined use of optical dark-field microscopy (DFM), cathodoluminescence (CL), and electron energy-loss spectroscopy (EELS) to study localized surface plasmons on individual gold nanodecahedra. By exciting surface plasmons with either external light or an electron beam, we experimentally resolve a prominent dipole-active plasmon band in the far-field radiation acquired via DFM and CL, whereas EELS reveals an additional plasmon mode associated with a weak dipole moment. We present measured spectra and intensity maps of plasmon modes in individual nanodecahedra in excellent agreement with boundary-element method simulations, including the effect of the substrate. A simple tight-binding model is formulated to successfully explain the rich plasmon structure in these particles encompasing bright and dark modes, which we predict to be fully observable in less lossy silver decahedra. Our work provides useful insight into the complex nature of plasmon resonances in nanoparticles with pentagonal symmetry. © 2012 American Chemical Society., We acknowledge support from the European Union (NMP4-2006-016881-SPANS, NMP4-SL-2008-213669-ENSEMBLE, FP7-ICT-2009-4-248909-LIMA, and FP7-ICT-2009-4-248855-N4E), the Spanish MICINN (MAT2010-14885, MAT2010-15374, and Consolider NanoLight.es), and Ibercivis. V.M. acknowledges the Spanish CSIC - JAE grant. G.A. and N.I.Z. acknowledge support of the EPSRC and the Royal Society (London). L.M.L.-M. acknowledges funding from the ERC (Advanced Grant PLASMAQUO, 267867).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microstructural stability at elevated temperatures of directionally solidified Al2O3/Er3Al5O12 eutectic ceramics

  • Mesa, M. Cristina
  • Oliete, Patricia B.
  • Larrea, Ángel
The thermal microstructural stability of Al2O3–Er3Al5O12 eutectic rods has been studied as a function of the solidification rate. The rods were directionally solidified by the Laser-Heated Floating Zone method, also known as Laser-Heated Pedestal growth technique. Their microstructures consisted of an interpenetrated network of both eutectic phases, whose size were controlled by the growth rate. The eutectics rods were heat-treated in air atmosphere at temperatures ranging from 1350 °C to 1650 °C up to 100 h. The coarsening kinetics was investigated from the evolution of the microstructure with the temperature and the time. The eutectics grown at 25 mm/h presented high thermal microstructural stability, with their microstructure remaining substantially unchanged even for the highest annealing temperature and the longest time. Eutectics grown at 350 mm/h experienced coarsening after 25 h at 1550 °C and those grown at 750 mm/h after 25 h at 1500 °C. Heterogeneous coarsening was found for heat treatments at 1650 °C., The authors acknowledge the financial support from the Ministerio de Ciencia e Innovación de España and from the FEDER funds of the EC under project MAT2009-13979-C03-03, and from the European Community under project ENSEMBLE NMP4-SL-2008–213669. Authors acknowledge the use of Servicio de Microscopia Electrónica (Servicios de Apoyo a la Investigación), Universidad de Zaragoza. The authors also thank Dr. J.Y. Pastor and Dr. A. Martín for their experimental support. M.C. Mesa thanks the Gobierno de Aragón for a grant., Peer reviewed