Skip to main content

MATERIALES BIOESTABLES Y BIOREABSORBIBLES A LARGO PLAZO COMO SOPORTES MACROPOROSOS PARA LA REGENERACION DEL CARTILAGO ARTICULAR

MAT2010-21611-C03-01

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Gelatin microparticles aggregates as three-dimensional scaffolding system in cartilage engineering

  • García Cruz, Dunia Mercedes
  • Sardinha, V.
  • Escobar Ivirico, Jorge Luis
  • Mano, J.F.
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
A three-dimensional (3D) scaffolding system for chondrocytes culture has been produced by agglomeration of cells and gelatin microparticles with a mild centrifuging process. The diameter of the microparticles, around 10 mu, was selected to be in the order of magnitude of the chondrocytes. No gel was used to stabilize the construct that maintained consistency just because of cell and extracellular matrix (ECM) adhesion to the substrate. In one series of samples the microparticles were charged with transforming growth factor, TGF-beta 1. The kinetics of growth factor delivery was assessed. The initial delivery was approximately 48 % of the total amount delivered up to day 14. Chondrocytes that had been previously expanded in monolayer culture, and thus dedifferentiated, adopted in this 3D environment a round morphology, both with presence or absence of growth factor delivery, with production of ECM that intermingles with gelatin particles. The pellet was stable from the first day of culture. Cell viability was assessed by MTS assay, showing higher absorption values in the cell/unloaded gelatin microparticle pellets than in cell pellets up to day 7. Nevertheless the absorption drops in the following culture times. On the contrary the cell viability of cell/TGF-beta 1 loaded gelatin microparticle pellets was constant during the 21 days of culture. The formation of actin stress fibres in the cytoskeleton and type I collagen expression was significantly reduced in both cell/gelatin microparticle pellets (with and without TGF-beta 1) with respect to cell pellet controls. Total type II collagen and sulphated glycosaminoglycans quantification show an enhancement of the production of ECM when TGF-beta 1 is delivered, as expected because this growth factor stimulate the chondrocyte proliferation and improve the functionality of the tissue., JLGR acknowledge the support of the Spanish Ministry of Education through project No. MAT2010-21611-C03-01 (including the FEDER financial support). The support of the Instituto de Salud Carlos III (ISCIII) through the CIBER initiative of the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN) is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of neutralization and cross-linking on the thermal degradation of chitosan electrospun membranes

  • Correia, D. M.
  • Gamiz Gonzalez, Mª Amparo
  • Botelho, G.
  • Lanceros-Mendez, S.
  • Sencadas, V.
  • Vidaurre, Ana|||0000-0003-3394-1176
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Thermal degradation of as-electrospun chitosan membranes and samples subsequently treated with ethanol and cross-linked with glutaraldehyde has been studied by thermogravimetry (TG) coupled with an infrared spectrometer. The influence of the electrospinning process and cross-linking in the electrospun chitosan thermal stability was evaluated. Up to three degradation steps were observed in the TG data, corresponding to water dehydration reaction at temperatures below 100 C, loss of side groups formed between the amine groups of chitosan and trifluoroacetic acid between 150 and 270 C and chitosan thermal degradation that starts around 250 C and goes up to 400 C. The Kissinger model was employed to evaluate the activation energies of the electrospun membranes during isothermal experiments and revealed that thermal degradation activation energy increases for the samples processed by electrospinning and subsequent neutralization and cross-linking treatments with respect to the neat chitosan powder., This work was supported by FEDER through the COMPETE Program and by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Project PEST-C/FIS/UI607/2011 and PEST-C/QUI/UIO686/2011. The authors also thank funding from "Matepro-Optimizing Materials and Processes", ref. "NORTE-07-0124-FEDER-000037", co-funded by the "Programa Operacional Regional do Norte" (ON.2 - O Novo Norte), under the "Quadro de Referencia Estrategico Nacional" (QREN), through the "Fundo Europeu de Desenvolvimento Regional" (FEDER). The authors also thank support from the COST Action MP1003 - "European Scientific Network for Artificial Muscles", MP1206 "Electrospun Nano-fibres for bio inspired composite materials and innovative industrial applications" and MP1301 "New Generation Biomimetic and Customized Implants for Bone Engineering". DMC and VS thank the FCT for the SFRH/BD/82411/2011 and SFRH/BPD/63148/2009 grants, respectively. JLGR and MAGG acknowledge the support of the Spanish Ministry of Science and Innovation through project no. MAT2010-21611-C03-01 and MAGG the BES-2011-044740 grant. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparative study of PCL-HAp and PCL-bioglass composite scaffolds for bone tissue engineering

  • Ródenas Rochina, Joaquín|||0000-0001-5764-207X
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Lebourg, Myriam Annette Madeleine
The aim of this work is to compare the effect of hydroxyapatite (HAp) or bioglass (BG) nanoparticles in a polycaprolactone composite scaffold aimed to bone regeneration. To allow a comparison of the influence of both types of fillers, scaffolds made of PCL or composites containing up to 20 % by weight HAp or BG were obtained. Scaffolds showed acceptable mechanical properties for its use and high interconnected porosity apt for cellular colonization. To study the effect of the different materials on pre-osteoblast cells differentiation, samples with 5 % mineral reinforcement, were cultured for up to 28 days in osteogenic medium. Cells proliferated in all scaffolds. Nevertheless, differentiation levels for the selected markers were higher in pure PCL scaffolds than in the composites; inclusion of bioactive particles showed no positive effects on cell differentiation. In osteogenic culture conditions, the presence of bioactive particles is thus not necessary in order to observe good differentiation., JLGR acknowledges the support of the Spanish Ministry of Science and Education through project No. MAT2010-21611-C03-01 (including the FEDER financial support), and from Generalitat Valenciana, ACOMP/2012/075 Project.. Lebourg acknowledges the support of UPV through Project PAID-O6-10 and thanks CIBER-BBN for funding her post-doc research. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. J. Rodenas acknowledges the funding of his PhD by the Generalitat Valenciana through VALi+d Grant. The authors also wish to thank the microscopy service of Universidad Politecnica de Valencia as well as the confocal microscopy service of the Research Centre Principe Felipe for useful help and advice.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chitosan microparticles gel for In vitro 3D culture of human chondrocytes

  • Garcia-Giralt, N.
  • García Cruz, Dunia Mercedes
  • Nogues, X.
  • Escobar Ivirico, Jorge Luis
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Chondrocytes are frequently cultured embedded in gels that provide them with a three-dimensional environment. Nevertheless cells in these constructs cannot remodel their neighbourhood when producing their own extracellular matrix. In this work we explore 3D environments that the cells can easily remodel. For this, human mature chondrocytes were cultured in the three-dimensional environment created by chitosan microparticles whose diameter is in the order of magnitude of the cell size. Chondrocytes and microparticles suspensions were mixed and the agglomerates were cultured in static tubes in chondrogenic medium. The poor adhesion between cells and chitosan surface maintained the mobility of the ensemble. In these conditions chondrocytes are viable during the 28 days of culture. The cells produce glycosaminoglycans, S100 and collagen type II up to 14 days of culture although production of type I collagen is also noticeable., J.L. Gomez Ribelles acknowledges the support of the Spanish Ministerio de Ciencia e Innovacion through MAT2010-21611-C03-00 project (including the FEDER financial support). CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. N Garcia-Giralt acknowledges the support by grants from the Generalitat de Catalunya (DIUE 2009 SGR 818, 2009 SGR 971) and the Red Tematica de Investigacion Cooperativa en Envejecimiento y Fragilidad (RETICEF) and FEDER funds. Grand MAT2007-66759-C03-02 of Plan Nacional del MINISTERIO DE EDUCACION Y CIENCIA are also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of ferrite nanoparticle type and content on the crystallization kinetics and electroactive phase nucleation of poly(vinilidene fluoride)

  • Sencadas, Vitor Joao Gomes Da Silva
  • Pitaes, Alexandre
  • Benelmekki, Maria
  • Lanceros Mendez, Senen
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] This work reports on the nucleation of the beta-phase of poly(vinylidene fluoride) (PVDF) by incorporating CoFe2O4 and NiFe2O4 nanoparticles, leading in this way to the preparation of magnetoelectric composites. The fraction of filler nanoparticles needed to produce the same beta- to alpha-phase ratio in crystallized PVDF is 1 order of magnitude lower in the cobalt ferrite nanoparticles. The interaction between nanoparticles and PVDF chains induce the all-trans conformation in PVDF segments, and this structure then propagates in crystal growth. The nucleation kinetics is enhanced by the presence of nanoparticles, as corroborated by the increasing number of spherulites with increasing nanoparticle content and by the variations of the Avrami's exponent. Further, the decrease of the crystalline fraction of PVDF with increasing nanoparticle content indicates that an important fraction of polymer chains are confined in interphases with the filler particle., This work is funded by FEDER funds through the “Programa Operacional Factores de Competitividade COMPETE” and by national funds by FCT- Fundac-~ao para a Ci^encia e a Tecnologia, project references NANO/NMed-SD/0156/2007 and PTDC/CTM/69316/2006. V.S. thanks the FCT for the SFRH/BPD/63148/2009 grant. P.M. thanks the FCT for the SFRH/BD/45265/2008 grant. J.L.G.-R. acknowledges the support of the Spanish Ministry of Education through Project No. MAT2010-21611-C03-01 (including the FEDER financial support), Project EUI2008-00126, and funding in the Centro de Investigacion Principe Felipe in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III (Ministry of Science and Innovation).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Determination of the parameters affecting electrospun chitosan fiber size distribution and morphology

  • Sencadas, Vitor Joao Gomes Da Silva
  • Correia, Daniela Maria
  • Areias Cepa, Anabela
  • Botelho, G.
  • Fonseca, A.M.
  • Neves, I.C.
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Lanceros Mendez, Senen
The production of chitosan nanofiber mats by electrospinning presents serious difficulties due to the lack of suitable solvents and the strong influence of processing parameters on the fiber properties. Two are the main problems to be solved: to control the properties of the solution in order to obtain large area uniform fiber mats by having a stable flow rate and to avoid sparks during the process, damaging the fiber mats. In this work chitosan electrospun mats have been prepared form solutions of trifluoroacetic acid/dichloromethanemixtures, allowing solving the aforementionedproblems.Mats withuniformfibers of submicron diameters without beads were obtained. Further, the influence of the different solution and process parameters on the mean fiber diameter and on the width of the distribution of the fiber sizes has been assessed. Solvent composition, needle diameter, applied voltage and traveling distance were the parameters considered in this study., This work is funded by FEDER funds through the “Programa Operacional Factores de Competitividade – COMPETE” and by national funds by FCT – Fundac ̧ ão para a Ciência e a Tecnologia, project references NANO/NMed-SD/0156/2007. VS thanks the FCT for the SFRH/BPD/63148/2009 grants. JLGR acknowledge the sup- port of the Spanish Ministry of Science and Innovation through project No. MAT2010-21611-C03-01 (including the FEDER finan- cial support) and Programa Nacional de Internacionalización de la I+D project EUI2008-00126. Funding for research in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Insti- tuto de Salud Carlos III (Ministry of Science and Innovation) is also acknowledged. Thanks are due to the National NMR Network that was purchased within the framework of the National Program for Scientific Re-equipment, contract REDE/1517/RMN/2005 with funds from POCI 2010 (FEDER) and FCT. Also thank to the UPV Microscopy Service for the use of their lab.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Time evolution of in vivo articular cartilage repair induced by bone marrow stimulation and scaffold implantation in rabbits

  • Sancho-Tello Valls, Maria
  • Forriol, Francisco
  • Gastaldi, Pablo
  • Ruiz Sauri, Amparo
  • Martín de Llano, Jose Javier
  • Novella-Maestre, E.
  • Antolinos Turpín, Carmen María
  • Carda, Carmen
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Purpose: Tissue engineering techniques were used to study cartilage repair over a 12-month period in a rabbit model. Methods: A full-depth chondral defect along with subchondral bone injury were originated in the knee joint, where a biostable porous scaffold was implanted, synthesized of poly(ethyl acrylate-co-hydroxyethyl acrylate) copolymer. Morphological evolution of cartilage repair was studied 1 and 2 weeks, and 1, 3, and 12 months after implantation by histological techniques. The 3-month group was chosen to compare cartilage repair to an additional group where scaffolds were preseeded with allogeneic chondrocytes before implantation, and also to controls, who underwent the same surgery procedure, with no scaffold implantation. Results: Neotissue growth was first observed in the deepest scaffold pores 1 week after implantation, which spread thereafter; 3 months later scaffold pores were filled mostly with cartilaginous tissue in superficial and middle zones, and with bone tissue adjacent to subchondral bone. Simultaneously, native chondrocytes at the edges of the defect started to proliferate 1 week after implantation; within a month those edges had grown centripetally and seemed to embed the scaffold, and after 3 months, hyaline-like cartilage was observed on the condylar surface. Preseeded scaffolds slightly improved tissue growth, although the quality of repair tissue was similar to non-preseeded scaffolds. Controls showed that fibrous cartilage was mainly filling the repair area 3 months after surgery. In the 12-month group, articular cartilage resembled the untreated surface. Conclusions: Scaffolds guided cartilaginous tissue growth in vivo, suggesting their importance in stress transmission to the cells for cartilage repair., This study was supported by the Spanish Ministry of Science and Innovation through MAT2010-21611-C03-00 project (including the FEDER financial support), by Conselleria de Educacion (Generalitat Valenciana, Spain) PROMETEO/2011/084 grant, and by CIBER-BBN en Bioingenieria, Biomateriales y Nanomedicina. The work of JLGR was partially supported by funds from the Generalitat Valenciana, ACOMP/2012/075 project. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the - Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Silica phase formed by sol-gel reaction in the nano- and micro-pores of a polymer hydrogel

  • Plazas Bonilla, Clara Eugenia
  • Perilla, Jairo E.
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Hybrid composites consisting in a hydrogel matrix with silica micro- and nano-particle reinforcement were produced and characterized. The strategy proposed here to obtain them consisted in a two-step synthesis being the polymer network formation the first step. Porous poly(hydroxyethyl acrylate) hydrogel network was produced by radical polymerization of the monomer diluted in different amounts of ethanol. Polymeric microstructure drives the absorption of a silica precursor solution and the further distribution of the inorganic phase that is formed in situ. A fraction of the resulting silica phase occupies the pores and the other part is in the form of nanoparticles dispersed in the polymer phase. Composites with silica content up to ~ 60% by weight were obtained. Silica phase is continuous and samples maintain their integrity after eliminating the organic phase by pyrolysis. Dependence of hybrid microstructure in compliance, water sorption capacity, bioactivity and the effect of silica content in polymer segmental mobility were assessed., CEPB acknowledges the economic support of COOPEN agreement in the progress of the present work. JLGR acknowledges the support of the Spanish Ministry of Education through project No. MAT2010-21611-C03-01 (including the FEDER financial support) and from Generalitat Valenciana, ACOMP/2012/075 project. The support of the Instituto de Salud Carlos III (ISCIII) through the CIBER Initiative of the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN) is also acknowledged. Authors want to thank the technical support of the Universitat Politecnica de Valencia's Microscopy Service.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced proliferation of pre-osteoblastic cells by dynamic piezoelectric stimulation

  • Ribeiro, C.
  • Moreira, S.
  • Correia, V.
  • Sencadas, V.
  • Rocha, J. G.
  • Gama, F. M.
  • Lanceros-Mendez, S.
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] This work reports on the influence of the polarization of electroactive poly(vinylidene fluoride), PVDF, on the biological response of cells cultivated under static and dynamic conditions. Non-poled and "poled +" beta-PVDF with and without a titanium layer were thus prepared. A thin titanium layer was deposited on PVDF films in order to obtain a more homogeneous surface charge. The MC3T3-E1 osteoblast cell culture exhibited different responses in the presence of PVDF films. The positively charged beta-PVDF films promote higher osteoblast adhesion and proliferation, which is higher under dynamic conditions on poled samples, showing that the surface charge under mechanical stimulation improves the osteoblast growth. Therefore, electroactive membranes and scaffolds can provide the necessary electrical stimuli for the growth and proliferation of specific cells., JLGR acknowledge the support of the Spanish Ministry of Education through project No. MAT2010-21611-C03-01 (including the FEDER financial support) and project EUI2008-00126.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Poly(epsilon-caprolactone) electrospun scaffolds filled with nanoparticles. Production and optimization according to Taguchi&apos, s methodology

  • SILVA, C.S.R.
  • Luz, G.M.
  • Gamboa Martínez, Tatiana Carolina
  • Mano, Joao F
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
Polycaprolactone scaffolds were produced by electrospinning. Polymeric solutions in a mix of dichloromethane and dimethylformamide were electrospun to form fibers in the sub-micron range. Physical properties of the polycaprolactone solutions were characterized with respect to density, viscosity, conductivity and surface tension. Processing was optimized following Taguchi's methodology to select the set of processing parameters that resulted in producing fibers with the smallest diameters, minimum number of defects and with the narrowest distribution of fiber diameter. Morphology of electrospun fibers was qualitatively and quantitatively analyzed for the different sets of processing parameters. The optimum conditions found to electrospun polycaprolactone were used to process polycaprolactone solutions containing nano-particles of hydroxyapatite or bioactive glass. Bioactivity of nano-composite electrospun membranes in simulated body fluid was analyzed and biological response was tested by assessing proliferation and viability of MT3C3-E1 preosteoblasts cultured on polycaprolactone and its nanocomposite membranes., This work was supported by the Spanish Ministry of Science and Innovation through the MCINN-MAT2010-21611-C03-01 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An in vitro experimental model to predict the mechanical behaviour of macroporous scaffolds implanted in articular cartilage

  • Vikingsson, Line Karina Alva
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
A model is proposed to assess mechanical behaviour of tissue engineering scaffolds and predict their performance in vivo during tissue regeneration. To simulate the growth of tissue inside the pores of the scaffold, the scaffold is swollen with a Poly (Vinyl alcohol) solution and subjected to repeated freezing and thawing cycles. In this way the Poly (Vinyl alcohol) becomes a gel whose stiffness increases with the number of freezing and thawing cycles. Mechanical properties of the construct immersed in water are shown to be determined, in large extent, by the water mobility constraints imposed by the gel filling the pores. This is similar to the way that water mobility determines mechanical properties of highly hydrated tissues, such as articular cartilage. As a consequence, the apparent elastic modulus of the scaffold in compression tests is much higher than those of the empty scaffold or the gel. Thus this experimental model allows assessing fatigue behaviour of the scaffolds under long-term dynamic loading in a realistic way, without recourse to animal experimentation., The UPV group acknowledges the support of the Spanish MICINN through project MAT2010-21611-C03-01. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The authors thank the microscopy service of Universitat Politecnica de Valencia for useful help and advice and Ricardo Perez Feito for technical assistance in the experimental set up.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Glass transition and dynamics in BSA-water mixtures over wide ranges of composition studied by thermal and dielectric techniques

  • Panagopoulou, A.
  • Kyritsis, A.
  • Shinyashiki, N.
  • Pissis, P.
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Protein-water dynamics in mixtures of water and a globular protein, bovine serum albumin (BSA), was studied over wide ranges of composition, in the form of solutions or hydrated solid pellets, by differential scanning calorimetry (DSC), thermally stimulated depolarization current technique (TSDC) and dielectric relaxation spectroscopy (DRS). Additionally, water equilibrium sorption isotherm (ESI) measurements were performed at room temperature. The crystallization and melting events were studied by DSC and the amount of uncrystallized water was calculated by the enthalpy of melting during heating. The glass transition of the system was detected by DSC for water contents higher than the critical water content corresponding to the formation of the first sorption layer of water molecules directly bound to primary hydration sites, namely 0.073 (grams of water per grams of dry protein), estimated by ESI. A strong plasticization of the Tg was observed by DSC for hydration levels lower than those necessary for crystallization of water during cooling, i.e. lower than about 0.3 (grams of water per grams of hydrated protein) followed by a stabilization of Tg at about - 80 °C for higher water contents. The ¿ relaxation associated with the glass transition was also observed in dielectric measurements. In TSDC a microphase separation could be detected resulting in double Tg for some hydration levels. A dielectric relaxation of small polar groups of the protein plasticized by water, overlapped by relaxations of uncrystallized water molecules, and a separate relaxation of water in the crystallized water phase (bulk ice crystals) were also recorded. © 2011 Elsevier B.V. All Rights Reserved., JLGR acknowledges the support of the Spanish Ministry of Science and Innovation through project MAT2010-21611-C03-01 (including the FEDER financial support) and funding for research in the field of Regenerative Medicine through the collaboration agreement between the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III (Ministry of Science and Innovation).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fibronectin adsorption and cell response on electroactive poly (vinylidene fluoride) films

  • Ribeiro, Clarisse
  • Panadero Pérez, Juan Alberto
  • Sencadas, Vitor Joao Gomes Da Silva
  • Lanceros Mendez, Senen
  • Tamaño Machiavello, María Noel
  • Salmerón Sánchez, Manuel
  • Moratal, David|||0000-0002-2825-3646
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Due to the large potential of electroactive materials in novel tissue engineering strategies, the aim of this work is to determine if the crystalline phase and/or the surface electrical charge of electroactive poly(vinylidene fluoride), PVDF, have influence on the biological response in monolayer cell culture. Non-polar α-PVDF and electroactive β-PVDF were prepared. The β-PVDF films were poled by corona discharge to show negative or positive electrical surface charge density. It has been concluded that hydrophilicity of the PVDF substrates depends significantly on crystalline phase and polarity. Furthermore, by means of atomic force microscopy and an enzyme-linked immunosorbent assay test, it has been shown that positive or negative poling strongly influences the behavior of β-PVDF supports with respect to fibronectin (FN) adsorption, varying the exhibition of adhesion ligands of adsorbed FN. Culture of MC3T3-E1 pre-osteoeblasts proved that cell proliferation depends on surface polarity as well. These results open the viability of cell culture stimulation by mechanical deformation of a piezoelectric substrate that results in varying electrical charge densities on the substrate surface., This work is funded by FEDER funds through the 'Programa Operacional Factores de Competitividade-COMPETE' and by national funds by FCT-Fundacao para a Ciencia e a Tecnologia, project reference NANO/NMed-SD/0156/2007. CR thanks the INL for a PhD grant. VS and JAP thank the FCT for the SFRH/BPD/63148/2009 and SFRH/BD/64586/2009/grants, respectively. JLGR acknowledges the support of the Spanish Ministry of Education through project no MAT2010-21611-C03-01 (including the FEDER financial support), project EUI2008-00126 and funding in the Centro de Investigacion Principe Felipe in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana) and the Instituto de Salud Carlos III (Ministry of Science and Innovation). The authors thank Armando Ferreira for the help with the contact angle measurements and CENTI, Portugal, for allowing the use of the set-up.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Silica coating of the pore walls of a microporous polycaprolactone membrane to be used in bone tissue engineering

  • Demirdogen, Bermali
  • Plazas Bonilla, Clara Eugenia
  • Trujillo, Sara
  • Perilla, J.E.
  • Elcin, A.E.
  • Elcin, Yasar Murat
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Polycaprolactone/silica microporous hybrid membranes were produced in two steps: A microporous polycaprolactone membrane with an interconnected porosity of 80% was obtained via a freeze extraction procedure, then silica was formed by a sol-gel reaction inside the micropores using tetraethyl orthosilicate, TEOS, as silica precursor. It is shown that silica forms a thin coating layer homogeneously distributed over the pore walls when sol-gel reaction is catalyzed by hydrochloric acid, while it forms submicron spherical particles when using basic catalyzer. Some physical properties and the viability and osteoblastic differentiation of bone marrow rat mesenchymal stem cells cultured on pure and hybrid membranes were studied., Contract grant sponsors: COOPEN Project. Turkish Academy of Sciences, TUBA; VI National R&D&I Plan 2008-2011; Iniciativa Ingenio 2010; Consolider Program; CIBER Actions; Instituto de Salud Carlos III; European Regional Development Fund
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Polycaprolactone membranes reinforced by toughened sol-gel produced silica networks

  • Trujillo, Sara
  • Plazas Bonilla, Clara Eugenia
  • Santos, Marta Sofía
  • Matos, Joana M.
  • Gamboa Martínez, Tatiana Carolina
  • Perilla, Jairo Ernesto
  • Mano, Joao F.
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
The aim of this work is to develop polycaprolactone based porous materials with improved mechanical performance to be used in bone repair. The hybrid membranes consist in a polymeric porous material in which the pore walls are coated by a silica thin layer. Silica coating increases membrane stiffness with respect to pure polymer but in addition filling the pores of the polymer with a silica phase improves bioactivity due to the delivery of silica ions in the neighborhood of the material in vivo. Nevertheless silica network, even that produced by sol-gel, might be too stiff and brittle what is not desirable for its performance as a coating. In this work we produced a toughened silica coating adding chitosan and 3-glycidoxypropyltrimethoxysilane (GPTMS) to the precursor solution looking for having polymer chains linked by covalent bonding to the silica network. Hybrid polymer-silica coating was produced by in situ sol-gel reaction using Tetraethyl orthosilicate (TEOS), GPTMS and chitosan. Chemical reaction between amine groups of chitosan chains and epoxy groups of GPTMS allowed covalent bonding of polymer chains to the silica network. Physical properties of the hybrid membranes were characterized and cell attachment of MC3T3-E1 pre-osteoblastic cells on the surface of these supports was assessed., CEPB acknowledges the economic support of COOPEN agreement in the progress of the present work. JFM acknowledges the support from Fundacao para a Ciencia e Tecnologia through project PTDC/FIS/115048/2009. JLGR acknowledges the support of the Spanish Ministry of Education through project No. MAT2010-21611-C03-01. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. Authors want to thank the technical support of the Universitat Politecnica de Valencia's Microscopy Service.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Different hyaluronic acid morphology modulates primary articular chondrocyte behaviour in hyaluronic acid coated polycaprolactone scaffolds

  • Lebourg, Myriam Madeleine
  • Sousa, Tiago
  • Mano, Joao
  • Ródenas Rochina, Joaquín|||0000-0001-5764-207X
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Scaffolds for cartilage tissue engineering should promote both adequate biomechanical environment and chondrogenic stimulation. Hyaluronic acid (HA) has been used in cartilage engineering for its chondrogenic and chondroprotective properties, nevertheless its mechanical properties are limited. Influence of HA microstructure in chondrocyte response has not been addressed yet. In this work, polycaprolactone (PCL) scaffolds were modified using HA following two coating strategies: coating in one step (PCL-HA1s) yields a gel-like phase within the scaffold, whereas a two-step reaction (PCL-HA2s) yields a thin HA layer coating internal surfaces of PCL structure. Chondrocytes were seeded in the scaffolds and cultured in dedifferentiating conditions up to 3 weeks and analyzed using a total DNA assay and sulfated glycosaminoglycan (sGAG) determination assay; cell morphology and extracellular matrix secretion were assessed by electron microscopy as well as immunofluorescent imaging (collagen I, collagen II, aggrecan, CD44). Cells proliferate in all samples and no cytotoxicity is observed. PCL-HA1s shows higher sGAG production per cell than PCL and PCL-HA2s at all times. Presence of hyaluronic acid promotes qualitative expression of CD44 surface markers and aggrecan (more visible in PCL-HA1s than PCL-HA2s), whereas in dedifferentiating conditions, expression of CD44 and aggrecan can hardly be detected in pure PCL scaffolds. Collagen type II seems more prominent in PCL-HA2s; although PCL-HA2s shows markers for COL II, aggrecan and CD44, quantitative ECM production is not improved with respect to PCL. It is thus likely that CD44 activation is not sufficient for explaining the better response in PCL-HA1s., Contract grant sponsors: CIBER-BBN; VI National R&D&i Plan 2008-2011; Iniciativa Ingenio 2010; Consolider Program; Instituto de Salud Carlos III; European Regional Development Fund; Valencian Generality; Conselleria de Sanidad (Generalitat Valenciana)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fatigue prediction in fibrin poly-epsilon-caprolactone macroporous scaffolds

  • Panadero, Juan Alberto
  • Vikingsson, Line Karina Alva
  • Sencadas, Vitor Joao Gomes Da Silva
  • Lanceros-Mendez, Senentxu
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Tissue engineering applications rely on scaffolds that during its service life, either for in-vivo or in vitro applications, are under loading. The variation of the mechanical condition of the scaffold is strongly relevant for cell culture and has scarcely been addressed. The fatigue life cycle of poly-epsilon-caprolactone, PCL, scaffolds with and without fibrin as filler of the pore structure were characterized both dry and immersed in liquid water. It is observed that the there is a strong increase from 100 to 500 in the number of loading cycles before collapse in the samples tested in immersed conditions due to the more uniform stress distributions within the samples, the fibrin loading playing a minor role in the mechanical performance of the scaffolds., This work is funded by FEDER funds through the "Programa Operacional Factores de Competitividade - COMPETE" and by national funds arranged by FCT-Fundacao para a Ciencia e Tecnologia, project references NANO/NMed-SD/0156/2007, PTDC/CTM-NAN/112574/2009 and PEST-C/FIS/UI607/2011. The authors also thank funding from "Matepro-Optimizing Materials and Processes", ref. "NORTE-07-0124-FEDER-000037", co-funded by the "Programa Operacional Regional do Norte" (ON.2 - O Novo Norte), under the "Quadro de Referencia Estrategico Nacional" (QREN), through the "Fundo Europeu de Desenvolvimento Regional" (FEDER). JAP and VS thank the FCT for the SFRWBD/64586/2009/ and SFRWBPD/63148/2009 grants, respectively. JLGR acknowledge the support of the Spanish Ministry of Science and Innovation through project No. MAT2010-21611-C03-01 (including the FEDER financial support). CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, GIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tailoring the morphology and crystallinity of poly(L-lactide acid) electrospun membranes

  • Ribeiro, Clarisse
  • Sencadas, Vitor Joao Gomes Da Silva
  • Miguel Costa, Carlos
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Lanceros-Mendez, Senentxu
[EN] Biodegradable poly(L-lactic acid) (PLLA) microfibers were prepared by electrospinning by varying the applied potential, solution flow rate and collector conditions. PLLA fibers with smoothly oriented and random morphologies were obtained and characterized by scanning electron microscopy. The optimum fiber orientation was obtained at 1000 rpm using a 20.3 cm diameter collecting drum, while for higher and lower drum rotation speeds, the rapid random motion of the jets resulted in a random fiber distribution. The deformation of the jet with rapid solidification during electrospinning often results in a metastable phase. PLLA electrospun fibers are amorphous but contain numerous crystal nuclei that rapidly grow when the sample is heated to 70-140 °C. In this way, the degree of crystallinity of the fibers can be tailored between 0 and 50% by annealing. Infrared transmission spectra revealed that the processing conditions do not affect the PLLA samples at the molecular level and that the crystallinity of the samples is related to the presence of ¿-crystals. © 2011 National Institute for Materials Science., SEM observations were conducted by the authors with the kind help of Jose Carlos Rodriguez from the Microscopy Service of Universidad Politecnica de Valencia, whose advice is greatly appreciated. We thank Centro for Nano and Microtechnologies (CeNTI), Famalicao, Portugal, for technical support and the Portuguese Foundation for Science and Technology (FCT) Grants PTDC/CTM/73030/2006, PTDC/CTM/69316/2006 and NANO/NMed-SD/0156/2007. VS thanks FCT for the SFRH/BPD/63148/2009 grant and CR thanks IINL for a PhD grant. JLGR acknowledges the support by the Spanish Ministry of Education through project No. MAT2010-21611-C03-01 (including FEDER financial support), by Centro de Investigacion Principe Felipe in the field of Regenerative Medicine through the collaboration agreement with Conselleria de Sanidad (Generalitat Valenciana) and Instituto de Salud Carlos III (Ministry of Science and Innovation).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cell-free cartilage engineering approach using hyaluronic acid-polycaprolactone scaffolds: A study invivo

  • Lebourg, Myriam Madeleine
  • Martínez Díaz, S.
  • Garcia Giralt, Natalia
  • Torres Claramunt, R.
  • Vila Canet, G
  • Monllau, J.C.
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Polycaprolactone scaffolds modified with cross-linked hyaluronic acid were prepared in order to establish whether a more hydrophilic and biomimetic microenvironment benefits the progenitor cells arriving from bone marrow in a cell- free tissue-engineering approach. The polycaprolactone and polycaprolactone/hyaluronic acid scaffolds were characterized in terms of morphology and water absorption capacity. The polycaprolactone and polycaprolactone/hyaluronic acid samples were implanted in a chondral defect in rabbits; bleeding of the subchondral bone was provoked to generate a spontaneous healing response. Repair at 1, 4, 12, and 24 weeks was assessed macroscopically using the International Cartilage Repair Society score and the Oswestry Arthroscopy Score and microscopically using immunohistological staining for collagen type I and type II, and for Ki-67. The presence of hyaluronic acid improves scaffold performance, which supports a good repair response without biomaterial pre-seeding., JLGR, JAGT and JCM acknowledge the support of the Spanish Ministry of Science through projects No. MAT2010-21611-C03-01 and -02. The support of Grant 2005SGR 00762 and 2005SGR 00848 (Catalan Department of Universities, Research and the Information Society) and the Red Tematica de Investigacion Cooperativa en Envejecimiento y Fragilidad (RETICEF) is also acknowledged. Myriam Lebourg acknowledges funding from UPV through the PAID-10 project funds and from CIBER-BBN. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the physicochemical properties of pure chitosan-coated poly(lactic acid) scaffolds on the chondrogenic differentiation of mesenchymal stem cells from osteoarthritic patients

  • Magalhaes, Joana
  • Lebourg, Myriam Madeleine
  • Deplaine, Harmony
  • Blanco, Francisco J.
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Due to the attractive properties of poly(L-lactic acid) (PLLA) and chitosan (CHT) for tissue engineering applications, this study is aimed at analyzing the chondrogenic potential of human bone marrow-derived mesenchymal stem cells (BM-MSCs) derived from osteoarthritic (OA) patients, in pure or CHT-coated PLLA, using different coating methodologies. Although PLLA scaffolds coated in one-step (PLLA-CHT1) yielded CHT smooth pellicles filling the PLLA macropores, a two-step strategy resulted in a CHT fiber-like thin coating covering PLLA pore walls (PLLA-CHT2). Both strategies led to the incorporation of similar content of CHT and a two-fold increase in the scaffold's water uptake capacity, providing elastic moduli values comparable to the ones found for human articular cartilage. After confirming OA-derived BM-MSCs, metabolic activity in the scaffolds, the chondrogenic potential was tested at 30 and 60 days, in a chondrogenic differentiation medium. PLLA scaffolds improved the chondrogenic differentiation of BM-MSCs, regarding cell pellet conventional culture and presented a typical cartilage zonal distribution, although was not able to revert a terminal differentiation. In PLLA-CHT1, on a short term, a rather heterogeneous tissue was formed, with confined areas of either slower cell infiltration or a faster maturation, with enhanced chondrogenic phenotype. In PLLA-CHT2, a similar tissue to PLLA was obtained, albeit on the long term, these scaffolds helped to maintain a hyaline-like phenotype and prevented the advance of the hypertrophic process. These results demonstrate the importance of the scaffolds microenvironment on the cellular events of chondrogenesis., The authors are thankful to the microscopy service of UPV for useful help and service; the Department of Orthopedic Surgery-CHUAC for providing human samples; T.H. Gomez and M.J. Sanchez for cell isolation and SCH of INIBIC for histological processing. The Biomedical Research Networking Center in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN) is a national initiative of ISCIII. This study was supported by Program ACI-PRO-MOCIONA (ACI2010-1095), MAT2010-21611-CO3-01, Iniciativa Ingenio 2010, and Consolider Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tailoring porous structure of ferroelectric poly(vinylidene fluoride-trifluoroethylene) by controlling solvent/polymer ratio and solvent evaporation rate

  • California, António
  • Cardoso, Vanessa F.
  • Costa, Carlos M.
  • Sencadas, Vitor
  • Botelho, Gabriela
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Lanceros-Mendez, Senentxu
Ferroelectric macroporous poly(vinylidene fluoride-trifluoroethylene) membranes have been produced by isothermal crystallization from the solution at different temperatures starting from different diluted solutions of the co-polymer in dimethylformamide. In this way pore architecture, consisting in interconnected spherical pores can be obtained. The mechanism and kinetics of solvent evaporation was investigated and related to the evolution of the polymer microstructure. The mechanism underlying the pattern formation has been discussed on the light of the Flory-Huggins (FH) lattice theory, grain boundary effects and the Cahn-Hilliard equation for mass conservation systems. It was also observed that the temperature or initial concentration of the crystallization process does not affect the phase, ferroelectric transition temperature or the melting temperature of the polymer., The authors thank the Portuguese Foundation for Science and Technology (FCT) Grants PTDC/CTM-NAN/112574/2009, PTDC/CTM/73030/2006, PTDC/CTM/69316/2006 and NANO/NMed-SD/0156/2007. V.F., C.M.C. and V.S. thank the FCT for the SFRH/BD/44289/2008, SFRH/BD/68499/2010, SFRH/BPD/63148/2009 grants, respectively. JLGR acknowledge the funding from the Programa de Apoyo a la Investigacion y Desarrollo (PAID-00-09) of the Universidad Politecnica de Valencia for a short stay in Universidade do Minho, Braga, the support of the Spanish Ministry of Science through project No. MAT2010-21611-C03-01 (including the FEDER financial support) and funding for research in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Institute de Salud Carlos III (Ministry of Science and Innovation). The authors wish also thank the CeNTI - Centre for Nanotechnology and Smart Materials, Rua Fernando Mesquita, 2782, 4760-034 Vila Nova de Famalicao, Portugal for allowing the use of some experimental equipment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physical-chemical properties of cross-linked chitosan electrospun fiber mats

  • Sencadas, Vitor Joao Gomes Da Silva
  • Correia, Daniela
  • Ribeiro, Clarisse
  • Moreira, S.
  • Botelho, G.
  • Lanceros Mendez, Senen
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Chitosan fiber mats were successfully processed by electrospinning. The as-spun fiber mats were neutralized with ethanol and cross-linked with glutaraldehyde. A decrease of the fiber average diameter from 243 +/- 43 nm down to 215.53 nm was observed for the neutralized and cross-linking chitosan membrane. It was found that the processing conditions do not alter the initial deacetylation degree of the polymer. Polymer crystallinity index showed a decrease from 61% for the Protasan material down to 17% for the cross-linking fiber mats. A swelling index up to 1000% was observed for the cross-linked samples. Preliminary MC-3T3-E1 cell culture results showed good cell adhesion and proliferation in the cross-linked chitosan fiber mats., This work is funded by FEDER funds through the "Programa Operacional Factores de Competitividade - COMPETE" and by national funds by FCT - Fundacao para a Ciencia e a Tecnologia, project references NANO/NMed-SD/0156/2007. V.S. and SM thanks the FCT grants SFRH/BPD/63148/2009 and SFRH/BPD/64726/2009, respectively. The authors also thank the support of the COST Action MP1003, 2010 'European Scientific Network for Artificial Muscles' (ESNAM). JLGR acknowledge the support of the Spanish Ministry of Science and Innovation through project No. MAT2010-21611-C03-01 (including the FEDER financial support) and Programa Nacional de Internacionalizacion de la I+D project EUI2008-00126. The authors also thank the National NMR Network (National Program for Scientific Re-equipment, REDE/1517/RMN/2005, funds from POCI 2010 (FEDER) and FCT) and Microscopy Service of the UPV for the use of their lab.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of electrospinning parameters on Poly(hydroxybutyrate) electrospun membranes fiber size and distribution

  • Correia, Daniela M.
  • Ribeiro, Clarisse
  • Ferreira, Jose C. C.
  • Botelho, Gabriela
  • Lanceros Mendez, Senen
  • Sencadas, Vitor
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Poly(hydroxybutyrate) (PHB) obtained from sugar cane waste was dissolved in a blend of chloroform and dimethylformamide (DMF) and electrospun at 40 degrees C. By adding DMF to the solution, the electrospinning process for the PHB polymer becomes more stable, allowing complete polymer crystallization during the jet travelling between the tip and the grounded collector. The influence of processing parameters on fiber size and distribution was systematically studied. It was observed that an increase of tip inner diameter promotes a decrease of the fiber average size and a broader distribution. Conversely, an increase of the electric field and flow rate produces an increase of fiber diameter until a maximum of similar to 2.0 mu m but for electric fields higher than 1.5 kV cm(-1), a decrease of the fiber diameter was observed. Polymer crystalline phase seems to be independent of the processing conditions and a crystallinity degree of 53% was found. Moreover, thermal degradation of the as-spun membrane occurs in single step degradation with activation energy of 91 kJ mol(-1). Furthermore, MC-3T3-E1 cell adhesion was not inhibited by the fiber mats preparation, indicating their potential use for biomedical applications., Contract grant sponsor: FEDER; contract grant sponsor: Programa Operacional Factores de Competitividade-COMPETE; contract grant sponsor: FCT-Fundacao para a Ciencia e a Tecnologia; contract grant numbers: NANO/NMed-SD/0156/2007, PTDC/CTM/73030/2006, and PTDC/CTM/69316/2006; contract grant sponsor: COST Action MP1003, 2010 'European Scientific Network for Artificial Muscles'; contract grant sponsor: FCT; contract grant numbers: SFRH/BPD/63148/2009 and SFRH/BD/82411/2011; contract grant sponsor: IINL; contract grant sponsor: Spanish Ministry of Science and Innovation (including the FEDER financial support); contract grant number: MAT2010-21611-C03-01; contract grant sponsors: VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, and Instituto de Salud Carlos III (with assistance from the European Regional Development Fund).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessment of Parameters Influencing fiber characteristics of chitosan nanofiber membrane to optimize fiber mat productioi

  • Areias, A.C.
  • Gómez-Tejedor, José Antonio
  • Sencadas, V.
  • Alio, J.
  • Lanceros-Mendez, S.
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Electrospun chitosan nanofiber mats have been obtained using chitosan solutions in a mixture of trifluoroacetic acid and dichloromethane. The relationship between processing parameters (solvent composition, polymer concentration in the solution, feeding rate, applied voltage, traveling distance between the needle, and the collector) and fiber morphology was studied. Taguchi's methodology was followed to determine which parameters have the strongest influence on mean fiber diameter and fiber homogeneity. Chitosan nanofibers obtained with this procedure were water soluble due to the protonation of amine side groups but were successfully neutralized by immersion in calcium carbonate solutions. It was established that fiber diameter is mainly determined by the solution concentration and the distance from the needle to the collector while other parameters have less influence. The set of parameters that produce the thinnest fibers were a concentration of 8 wt%, a TFA/DCM ratio of 80:20 (v/v%), a voltage of 30 kV, a flow rate of 6.0 mL/h, a gap distance of 10 cm, using a needle diameter of 0.5, allowing to produce randomly oriented mats with a mean fiber thickness of 66 nm. © 2012 Society of Plastics Engineers., Contract grant sponsor: Portuguese Foundation for Science and Technology (FCT); contract grant number: NANO/NMed-SD/0156/2007; Contract grant sponsor: FCT; contract grant number: SFRH/BPD/63148/2009; Contract grant sponsor: Spanish Ministry of Science and Innovation; contract grant number: MAT2010-21611-C03-01; Contract grant sponsor: Programa Nacional de Internacionalizacion de la I+D; contract grant number: EUI2008-00126; Contract grant sponsors: Regenerative Medicine collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III (Ministry of Science and Innovation); Contract grant sponsors: Spanish Ministry of Science and Innovation, Centro para el Desarrollo Tecnologico Industrial (CDTI), CENIT: "Customized Eye Care'' and CeyeC; contract grant number: CEN-20091021; Contract grant sponsor: The translation of this paper was funded by the Universitat Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of crystallinity and fiber orientation on hydrophobicity and biological response of poly(L-lactide) electrospun mats

  • Areias, A.C.
  • Ribeiro, Clarisse
  • Sencadas, Victor
  • Garcia Giralt, Natalia
  • Diez Perez, A.
  • Lanceros Mendez, Senen
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Poly(L-lactide) electrospun mats have been produced with random and aligned fiber orientation and degrees of crystallinity from 0 up to nearly 50%. These two factors, fiber alignment and degree of crystallinity, strongly affect the hydrophobicity of the samples, this being larger for the aligned fiber mats and for the fibers with a higher degree of crystallinity. Whereas, the first effect can be associated with a decrease in the degree of porosity, the second should be related to an increase in fiber stiffness as the observed fiber roughness variations do not show strong differences between the samples. Proliferation of human chondrocytes cultured in a monolayer on these substrates is similar in both aligned and non-aligned amorphous mats. Crystallization of the aligned mats, on the other hand, nearly suppresses proliferation and the cells produce higher amounts of aggrecan, characteristic of the extracellular matrix of hyaline cartilage., This work is funded by FEDER funds through the "Programa Operacional Factores de Competitividade - COMPETE'' and by national funds by FCT (Fundacao para a Ciencia e a Tecnologia, project references PTDC/CTM/69316/2006, PTDC/CTM-NAN/112574/2009, and NANO/NMed-SD/0156/2007). V.S. thanks the FCT for the SFRH/BPD/63148/2009 grant. C. R. thanks the IINL for the financial support via a PhD grant. NG thanks Red Tematica de Investigacion Cooperativa en Envejecimiento y Fragilidad (RETICEF), which is an initiative of the ISCIII and the Catalan Government (2009SGR00848). JLGR acknowledges the support of the Spanish Ministry of Education through project No. MAT2010-21611-C03-01 (including the FEDER financial support). The authors thank the support from the COST Action MP1003, 2010, 'European Scientific Network for Artificial Muscles' (ESNAM).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hydrolytic degradation of PLLA/PCL microporous membranes prepared by freeze extraction

  • Gaona, Luis Andrés
  • Perilla, Jairo Ernesto
  • Lebourg, Myriam Madeleine
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Poly(L-lactic acid) Poly(e-caprolactone) blends (PLLA/PCL) porous membranes were prepared by freeze extraction (a modification of freeze drying) with ratios 100/0, 80/20, 60/40, 40/60, 20/80, 0/100 in weight. Degradation of the membranes in phosphate buffer solution (PBS) up to 65 weeks was studied using weight loss measurements, high performance liquid chromatography (HPLC), differential scanning calorimetry (DSC), mechanical indentation, gel permeation chromatography (GPC), and scanning electron microscopy (SEM). Degradation rate as observed by weight loss and reduction of molecular weight and mechanical properties depended on the composition of the blends. In most blends the degradation was more prominent in the PLLA phase and was accompanied by consequent recrystallization that formed a crystalline phase with increased resistance to hydrolysis. Occurrence of such crystalline phases and degradation of intercrystalline domain led to formation of nearly monodisperse molecular weight populations. Membranes with only 20% PCL presented favorable behavior compared to pure PLLA membranes as reflected in a lower degradation rate and a limited loss of the mechanical properties. At the same time, degradation rate of 80/20 membranes was enhanced with respect to pure PCL, and membranes were stiffer than PCL membranes at all degradation times. This composition could thus be useful for use in tissue engineering for bone or cartilage applications., Luis Andres Gaona wishes to thank "Programa de Doctorados Nacionales 2009" of COLCIENCIAS (Departamento Administrativo de Ciencia, Tecnologia e Innovacion Colombia) and COOPEN Project (Colombia, Costa Rica, Panama and European Network) for supporting his PhD studies. Myriam Lebourg acknowledges UPV for funding through project PAID 06-10, and CIBER-BBN for funding her postdoc research. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. Jose Luis Gomez Ribelles acknowledges the support of the Spanish Ministry of Science and Innovation through MAT2010-21611-C03-01 (including the FEDER financial support) and funding in the Centro de Investigacion Principe Felipe in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III (Ministry of Science and Innovation). The authors wish also to thank the Microscopy Service and Instituto de Tecnologia Quimica of Universidad Politecnica de Valencia for useful help and advices.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Relaxation dynamics of poly(vinylidene fluoride) studied by dynamical mechanical measurements and dielectric spectroscopy

  • Sencadas, V.
  • Lanceros-Mendez, S.
  • Andrio Balado, A.
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The aim of this study is to analyze the mobility of polymer chains in semicrystalline poly(vinylidene fluoride) (PVDF). PVDF crystallizes from the melt in the crystalline phase. The transformation from the phase to the electroactive phase can be induced by stretching at temperatures in the range between 80 and 140 ◦C. The spherulitic structure of the crystalline phase is deformed during stretching to form fibrils oriented in the direction of the strain. The amorphous phase confined among the crystalline lamellae is distorted as well and some degree of orientation of the polymer chains is expected. Dynamicmechanical and dielectric spectroscopy measurements were performed in PVDF films stretched to strain ratios up to 5 at temperatures between 80 and 140 ◦C. Dynamic-mechanical measurements were conducted between −60 ◦C and melting and in this temperature range the relaxation spectra show the main relaxation of the amorphous phase (called -relaxation) and at higher temperatures a relaxation related to crystallites motions (c-relaxation). Although the mean relaxation times of the -relaxation are nearly equal in PVDF before and after crystal phase transformation, a significant change of shape of the relaxation spectrum proves the effect of chain distortion due to crystal reorganization. In stretched PVDF the elastic modulus of the polymer in the direction of deformation is significantly higher than in the transversal one, as expected by chain and crystals fibril orientation. The recovery of the deformation when the sample is heated is related with the appearance of the c-relaxation. Dielectric spectroscopy spectrum shows the main relaxation of the amorphous phase and a secondary process (-relaxation) at lower temperatures. Stretching produces significant changes in the relaxation processes, mainly in the strength and shape of the main relaxation. The Havriliak-Negami function has been applied to analyze the dielectric response., This work is funded by FEDER funds through the "Programa Operacional Factores de Competitividade-COMPETE" and by national funds by FCT-Fundacao para a Ciencia e Tecnologia, project references NANO/NMed-SD/0156/2007, PTDC/CTM/69316/2006 and PTDC/CTM-NAN/112574/2009. V. S. thanks the FCT for the SFRH/BPD/63148/2009 grant. JLGR acknowledges the support of the Spanish Ministry of Science and Innovation through MAT2010-21611-C03-01 (including the FEDER financial support), and EUI2008-00126 projects and funding in the Centro de Investigacion Principe Felipe in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III (Ministry of Science and Innovation). The authors also acknowledge support from the COST Action MP1003, 2010 "European Scientific Network for Artificial Muscles".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

New porous polycaprolactone–silica composites for bone regeneration

  • Plazas Bonilla, Clara Eugenia
  • Trujillo, Sara
  • Demirdogen, Bermali
  • Perilla, Jairo Ernesto
  • Elcin, Yasar Murat
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Polycaprolactone porous membranes were obtained by freeze extraction of dioxane from polycaprolactone-dioxane solid solutions. Porosities as high as 90% with interconnected structures were obtained by this technique. A silica phase was synthesized inside the pores of the polymer membrane by sol-gel reaction using tetraethylorthosilicate (TEOS) as a silica precursor and catalyzed in acidic and basic conditions. Two different morphologies of the inorganic phase were obtained depending on the type of catalyst. In acid catalyzed sol-gel reaction, a homogeneous layer of silica was deposited on the pores, and discrete microspheres were synthesized on the pore walls when a basic catalyst was used. The morphology of the inorganic phase influenced the mechanical and thermal behavior, as well as the hydrophilic character of the composites. Bioactivity of the porous materials was tested in vitro by measuring the deposition of hydroxyapatite on the surfaces of the porous composite membranes. Polycaprolactone/silica composites revealed a superior bioactivity performance compared with that of the pure polymer; evidenced by the characteristic cauliflower structures on the material surface, increase in weight and Ca/P ratio of the hydroxyapatite layer. Also, the acid catalyzed composites presented better bioactivity than the base catalyzed composites, evidencing the importance in the morphology of the silica phase. (C) 2014 Elsevier B.V. All rights reserved., CEPB acknowledges the economic support of the COOPEN agreement in the progress of this work. JLGR acknowledges the support of the Spanish Ministry of Education through project No. MAT2010-21611-C03-01 (including the FEDER financial support). YME acknowledges the support of the Turkish Academy of Sciences, TUBA. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The authors want to thank for the technical support of the Universitat Politecnica de Valencia's Microscopy Service.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Composition-dependent physical properties of poly[(vinylidene fluoride)-co-trifluoroethylene] poly(ethylene oxide) blends

  • Costa, Carlos M.
  • Tamano Machiavello, M.N.
  • Lanceros Mendez, Senen
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Polymer blends based on poly(vinylidene fluoride-co-trifluoroethylene) copolymers, P(VDF-TrFE), and poly(ethylene oxide), PEO, with varying compositions have been prepared by solvent casting. In this way, P(VDF-TrFE) crystallizes from the solution while solvent evaporates, while PEO crystallizes from the melt during cooling to room temperature. The surface morphology of the polymer blends indicates the transition from the fibrillar microstructure typical of PVDF-TrFE to the spherulite structure characteristic of PEO. The vibration mode characteristics of P(VDF-TrFE) are not influenced by the presence of PEO in the polymer blend. Confinement of PEO in the P(VDF-TrFE) phase change the conformation of PEO from trans to helix, increasing this transformation for increasing P(VDF-TrFE) content in the polymer blends. Sequential crystallization of the two polymers produce separated amorphous phases whose independent cooperative conformational motions are revealed by two main dynamic-mechanical relaxations. No chemical interaction seems to exist between the polymers within the blend., This study is funded by FEDER funds through the "Programa Operacional Factores de Competitividade - COMPETE'' and by national funds by FCT-Fundacao para a Ciencia e a Tecnologia, Project References NANO/NMed-SD/0156/2007 and PTDC/CTM/69316/2006. C. M. C. also thanks the FCT for the Grant SFRH/BD/68499/2010. The authors also thank support from the COST Action MP1003, the "European Scientific Network for Artificial Muscles'' (ESNAM). JLGR acknowledges the support of the Spanish Ministry of Education through Project No. MAT2010-21611-C03-01 (including the FEDER financial support). CIBER-BBN is an initiative funded by the VI National R&D&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of fiber diameter and crystallinity on the stability of electrospun poly(L-lactic acid) membranes to hydrolytic degradation

  • Dias, Juliana C.
  • Ribeiro, Clarisse
  • Sencadas, V.
  • Botelho, G.
  • Lanceros Mendez, Senentxu
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Hydrolytic degradation of electrospun mats of poly(l-lactic acid), PLLA, as a function of crystallinity and fiber diameter has been studied. The degradation in a saline phosphate buffer solution (PBS) up to 20 weeks produced a slight decrease in the sample mass but a clear decrease of the polymer average molecular weight in the amorphous fibers. This effect decreases as crystallinity increases. It is important for applications that morphological characteristics of the membranes such as average fiber diameter and membrane porosity are also affected by the degradation process. Fiber diameter increases while membrane porosity decreases, resulting in closer packed fibers due to the release of internal tensions related to the electrospinning and/or thermal treatment processes., This work is funded by FEDER funds through the "Programa Operacional Factores de Competitividade - COMPETE" and by national funds arranged by FCT - Fundacao para a Ciencia e a Tecnologia, project references NANO/NMed-SD/0156/2007, PTDC/CTM/73030/2006 and PTDC/CTM/69316/2006. The authors also thank support from the COST Action MP1003, 2010 'European Scientific Network for Artificial Muscles'. V.S. thanks the FCT for the SFRH/BPD/63148/2009 grant. C. R. thanks the Iberian Institute of Nanotechnology Laboratory (IINL) for a PhD grant. JLGR acknowledge the support of the Spanish Ministry of Education through project No. MAT2010-21611-C03-01 (including the FEDER financial support).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Stirred flow bioreactor modulates chondrocyte growth and extracellular matrix biosynthesis in chitosan scaffolds

  • García Cruz, Dunia Mercedes
  • Salmerón Sánchez, Manuel
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
The aim of this study is to show the favorable effect of simple dynamic culture conditions on chondrogenesis of previously expanded human chondrocytes seeded in a macroporous scaffold with week cell-pore walls adhesion. We obtained enhanced chondrogenesis by the combination of chitosan porous supports with a double micro- and macro-pore structure and cell culture in a stirring bioreactor. Cell-scaffold constructs were cultured under static or mechanically stimulated conditions using an intermittent stirred flow bioreactor during 28 days. In static culture, the chondrocytes were homogeneously distributed throughout the scaffold pores; cells adhered to the scaffold pore walls, showed extended morphology and were able to proliferate. Immunofluorescense and biochemical assays showed abundant type I collagen deposition at day 28. However, the behavior of chondrocytes submitted to mechanical stimuli in the bioreactor was completely different. Mechanical loading influenced cell morphology and extracellular matrix composition. Under dynamic conditions, chondrocytes kept their characteristic phenotype and tended to form cell aggregates surrounded by a layer of the main components of the hyaline cartilage extracellular matrix, type II collagen, and aggrecan. An enhanced aggrecan and collagen type II production was observed in engineered cartilage constructs cultured under stirred flow compared with those cultured under static conditions., Contract grant sponsor: Spanish Ministry of Education; contract grant number: MCINN-MAT2010-21611-C03-01
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Processing and characterization of alpha-elastin electrospun membranes

  • Araujo, J.
  • Padrao, J.
  • Silva, J. P.
  • Dourado, F.
  • Correia, D. M.
  • Botelho, G.
  • Lanceros-Mendez, S.
  • Sencadas, V.
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Elastin isolated from fresh bovine ligaments was dissolved in a mixture of 1,1,1,3,3,3-Hexafluoro-2-propanol and water were electrospun into fiber membranes under different processing conditions. Fiber mats of randomly and aligned fibers were obtained with fixed and rotating ground collectors and fibrils were composed by thin ribbons whose width depends on electrospinning conditions; fibrils with 721 nm up to 2.12 ¿m width were achieved. After cross-linking with glutaraldehyde, ¿-elastin can uptake as much as 1700 % of PBS solution and a slight increase on fiber thickness was observed. The glass transition temperature of electrospun fiber mats was found to occur at ~80 °C. Moreover, ¿-Elastin showed to be a perfect elastomeric material, and no mechanical hysteresis was found in cycle mechanical measurements. The elastic modulus obtained for random and aligned fibers mats in a PBS solution was 330±10 kPa and 732±165 kPa, respectively. Finally, the electrospinning and cross-linking process does not inhibit MC-3T3-E1 cell adhesion. Cell culture results showed good cell adhesion and proliferation in the cross-linked elastin fiber mats., This work is funded by FEDER funds through the "Programa Operacional Factores de Competitividade-COMPETE" and by national funds arranged by FCT-Fundacao para a Ciencia e a Tecnologia, project references NANO/NMed-SD/0156/2007, PTDC/CTM-NAN/112574/2009, and PEST-C/FIS/UI607/2011. The authors also thank funding from "Matepro-Optimizing Materials and Processes", ref. "NORTE-07-0124-FEDER-000037", cofunded by the "Programa Operacional Regional do Norte" (ON.2-O Novo Norte), under the "Quadro de Referencia Estrategico Nacional" (QREN), through the "Fundo Europeu de Desenvolvimento Regional" (FEDER). The authors also thank support from the COST Action MP1003, 2010 'European Scientific Network for Artificial Muscles'. VS, JP, JS, and DMC thank the FCT for the SFRH/BD/48708/2008, SFRH/BD/64901/2009, SFRH/BPD/64958/2009 and SFRH/BPD/63148/2009, and SFRH/BD/82411/2011 grants, respectively. JLGR acknowledges the support of the Spanish Ministry of Science and Innovation through project No. MAT2010-21611-C03-01 (including the FEDER financial support). CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.