Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermal Properties of Electrospun Poly(Lactic Acid) Membranes

  • Sencadas, Vitor Joao Gomes Da Silva
  • Costa, C.M.
  • Botelho, G.
  • Caparrós, C.
  • Ribeiro, C.
  • Lanceros-Mendez, Senentxu
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Poly(lactic acid) (PLA) electrospun membranes were obtained by electrospinning and characterized by scanning electron microscopy (SEM) and thermal analysis. The polymer membranes showed a random fiber distribution with a mean diameter of 1µm (±300 nm). Differential scanning calorimetry (DSC) experiments showed that the membranes had a glass transition, cold crystallization, and melting temperatures of 54, 90, and 151◦C, respectively. The kinetic study of thermal degradation of PLA under a nitrogen atmosphere was performed by means of thermogravimetry (TGA). It was found that the thermal decomposition kinetics of PLA could be interpreted in terms of a multi-step degradation mechanism. Several theoretical models were applied to the TGA data. The activation energies obtained by the Broido and Ozawa–Flynn–Wall (OFW) models were in good agreement with the value of the activation energy calculated by the Kissinger method, The authors thank the Portuguese Foundation for Science and Technology (FCT) for finantial support under grants NANO/NMed-SD/0156/2007 and PTDC/CTM/73030/2006. V. Sencadas thanks the FCT for the SFRH/BPD/63148/2009 grant. C. Ribeiro thanks the INL for a PhD grant. J. L. Gomez-Ribelles acknowledges the support of the Spanish Ministry of Education through project No. MAT2007-66759-C03-01 (including the FEDER financial support, and funding in the Centro de Investigacion Principe Felipe in the field of Regenerative Medicine through the collaboration agreement between the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III (Ministry of Science and Innovation).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tailoring the morphology and crystallinity of poly(L-lactide acid) electrospun membranes

  • Ribeiro, Clarisse
  • Sencadas, Vitor Joao Gomes Da Silva
  • Miguel Costa, Carlos
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Lanceros-Mendez, Senentxu
[EN] Biodegradable poly(L-lactic acid) (PLLA) microfibers were prepared by electrospinning by varying the applied potential, solution flow rate and collector conditions. PLLA fibers with smoothly oriented and random morphologies were obtained and characterized by scanning electron microscopy. The optimum fiber orientation was obtained at 1000 rpm using a 20.3 cm diameter collecting drum, while for higher and lower drum rotation speeds, the rapid random motion of the jets resulted in a random fiber distribution. The deformation of the jet with rapid solidification during electrospinning often results in a metastable phase. PLLA electrospun fibers are amorphous but contain numerous crystal nuclei that rapidly grow when the sample is heated to 70-140 °C. In this way, the degree of crystallinity of the fibers can be tailored between 0 and 50% by annealing. Infrared transmission spectra revealed that the processing conditions do not affect the PLLA samples at the molecular level and that the crystallinity of the samples is related to the presence of ¿-crystals. © 2011 National Institute for Materials Science., SEM observations were conducted by the authors with the kind help of Jose Carlos Rodriguez from the Microscopy Service of Universidad Politecnica de Valencia, whose advice is greatly appreciated. We thank Centro for Nano and Microtechnologies (CeNTI), Famalicao, Portugal, for technical support and the Portuguese Foundation for Science and Technology (FCT) Grants PTDC/CTM/73030/2006, PTDC/CTM/69316/2006 and NANO/NMed-SD/0156/2007. VS thanks FCT for the SFRH/BPD/63148/2009 grant and CR thanks IINL for a PhD grant. JLGR acknowledges the support by the Spanish Ministry of Education through project No. MAT2010-21611-C03-01 (including FEDER financial support), by Centro de Investigacion Principe Felipe in the field of Regenerative Medicine through the collaboration agreement with Conselleria de Sanidad (Generalitat Valenciana) and Instituto de Salud Carlos III (Ministry of Science and Innovation).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tailoring porous structure of ferroelectric poly(vinylidene fluoride-trifluoroethylene) by controlling solvent/polymer ratio and solvent evaporation rate

  • California, António
  • Cardoso, Vanessa F.
  • Costa, Carlos M.
  • Sencadas, Vitor
  • Botelho, Gabriela
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Lanceros-Mendez, Senentxu
Ferroelectric macroporous poly(vinylidene fluoride-trifluoroethylene) membranes have been produced by isothermal crystallization from the solution at different temperatures starting from different diluted solutions of the co-polymer in dimethylformamide. In this way pore architecture, consisting in interconnected spherical pores can be obtained. The mechanism and kinetics of solvent evaporation was investigated and related to the evolution of the polymer microstructure. The mechanism underlying the pattern formation has been discussed on the light of the Flory-Huggins (FH) lattice theory, grain boundary effects and the Cahn-Hilliard equation for mass conservation systems. It was also observed that the temperature or initial concentration of the crystallization process does not affect the phase, ferroelectric transition temperature or the melting temperature of the polymer., The authors thank the Portuguese Foundation for Science and Technology (FCT) Grants PTDC/CTM-NAN/112574/2009, PTDC/CTM/73030/2006, PTDC/CTM/69316/2006 and NANO/NMed-SD/0156/2007. V.F., C.M.C. and V.S. thank the FCT for the SFRH/BD/44289/2008, SFRH/BD/68499/2010, SFRH/BPD/63148/2009 grants, respectively. JLGR acknowledge the funding from the Programa de Apoyo a la Investigacion y Desarrollo (PAID-00-09) of the Universidad Politecnica de Valencia for a short stay in Universidade do Minho, Braga, the support of the Spanish Ministry of Science through project No. MAT2010-21611-C03-01 (including the FEDER financial support) and funding for research in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Institute de Salud Carlos III (Ministry of Science and Innovation). The authors wish also thank the CeNTI - Centre for Nanotechnology and Smart Materials, Rua Fernando Mesquita, 2782, 4760-034 Vila Nova de Famalicao, Portugal for allowing the use of some experimental equipment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The role of solvent evaporation in the microstructure of electroactive beta-poly(vinylidene fluoride) membranes obtained by isothermal crystallization

  • Magalhaes, R.
  • Duraes, N.
  • Silva, M.
  • Silva, J.
  • Sencadas, V.
  • Botelho, G.
  • Lanceros Mendez, Senen
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Electroactive beta-poly(vinylidene fluoride) (PVDF) membranes were obtained by isothermal crystallization from the solution. Different morphologies and microstructures were obtained by crystallizing at different temperatures. The mechanism and kinetics of solvent evaporation from the polymeric solution were investigated using isothermal thermogravimetric analysis. The kinetic parameters and the activation energy were also calculated. The solvent evaporation is ruled by two steps, related with a metastable-unstable-metastable transition in the solution phase diagram. Scanning electron microscopy revealed the porous structure and the variations of the morphology with the variation of the isothermal evaporation temperature. Finally, the infrared spectroscopy measurements confirm that the polymer crystallizes in the electroactive beta-phase of PVDF., The authors thank the Portuguese Foundation for Science and Technology (FCT) Grants PTDC/CTM/73030/2006, PTDC/CTM/69316/2006, and NANO/NMed-SD/0156/2007. V. Sencadas thanks the FCT for the SFRH/BPD/63148/2009 grant. JLGR acknowledges the funding from the Programa de Apoyo a la Investigacion y Desarrollo (PAID-00-09) of the Universidad Politecnica de Valencia for a short stay in Universidade do Minho, Braga, the support of the Spanish Ministry of Science through project No. MAT2007-66759-C03-01 (including the FEDER financial support), and funding for research in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III (Ministry of Science and Innovation). The authors also thank Solvay for providing the excellent quality material.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of electrospinning parameters on Poly(hydroxybutyrate) electrospun membranes fiber size and distribution

  • Correia, Daniela M.
  • Ribeiro, Clarisse
  • Ferreira, Jose C. C.
  • Botelho, Gabriela
  • Lanceros Mendez, Senen
  • Sencadas, Vitor
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Poly(hydroxybutyrate) (PHB) obtained from sugar cane waste was dissolved in a blend of chloroform and dimethylformamide (DMF) and electrospun at 40 degrees C. By adding DMF to the solution, the electrospinning process for the PHB polymer becomes more stable, allowing complete polymer crystallization during the jet travelling between the tip and the grounded collector. The influence of processing parameters on fiber size and distribution was systematically studied. It was observed that an increase of tip inner diameter promotes a decrease of the fiber average size and a broader distribution. Conversely, an increase of the electric field and flow rate produces an increase of fiber diameter until a maximum of similar to 2.0 mu m but for electric fields higher than 1.5 kV cm(-1), a decrease of the fiber diameter was observed. Polymer crystalline phase seems to be independent of the processing conditions and a crystallinity degree of 53% was found. Moreover, thermal degradation of the as-spun membrane occurs in single step degradation with activation energy of 91 kJ mol(-1). Furthermore, MC-3T3-E1 cell adhesion was not inhibited by the fiber mats preparation, indicating their potential use for biomedical applications., Contract grant sponsor: FEDER; contract grant sponsor: Programa Operacional Factores de Competitividade-COMPETE; contract grant sponsor: FCT-Fundacao para a Ciencia e a Tecnologia; contract grant numbers: NANO/NMed-SD/0156/2007, PTDC/CTM/73030/2006, and PTDC/CTM/69316/2006; contract grant sponsor: COST Action MP1003, 2010 'European Scientific Network for Artificial Muscles'; contract grant sponsor: FCT; contract grant numbers: SFRH/BPD/63148/2009 and SFRH/BD/82411/2011; contract grant sponsor: IINL; contract grant sponsor: Spanish Ministry of Science and Innovation (including the FEDER financial support); contract grant number: MAT2010-21611-C03-01; contract grant sponsors: VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, and Instituto de Salud Carlos III (with assistance from the European Regional Development Fund).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of fiber diameter and crystallinity on the stability of electrospun poly(L-lactic acid) membranes to hydrolytic degradation

  • Dias, Juliana C.
  • Ribeiro, Clarisse
  • Sencadas, V.
  • Botelho, G.
  • Lanceros Mendez, Senentxu
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
Hydrolytic degradation of electrospun mats of poly(l-lactic acid), PLLA, as a function of crystallinity and fiber diameter has been studied. The degradation in a saline phosphate buffer solution (PBS) up to 20 weeks produced a slight decrease in the sample mass but a clear decrease of the polymer average molecular weight in the amorphous fibers. This effect decreases as crystallinity increases. It is important for applications that morphological characteristics of the membranes such as average fiber diameter and membrane porosity are also affected by the degradation process. Fiber diameter increases while membrane porosity decreases, resulting in closer packed fibers due to the release of internal tensions related to the electrospinning and/or thermal treatment processes., This work is funded by FEDER funds through the "Programa Operacional Factores de Competitividade - COMPETE" and by national funds arranged by FCT - Fundacao para a Ciencia e a Tecnologia, project references NANO/NMed-SD/0156/2007, PTDC/CTM/73030/2006 and PTDC/CTM/69316/2006. The authors also thank support from the COST Action MP1003, 2010 'European Scientific Network for Artificial Muscles'. V.S. thanks the FCT for the SFRH/BPD/63148/2009 grant. C. R. thanks the Iberian Institute of Nanotechnology Laboratory (IINL) for a PhD grant. JLGR acknowledge the support of the Spanish Ministry of Education through project No. MAT2010-21611-C03-01 (including the FEDER financial support).