RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication
Artículo científico (JournalArticle)
Influence of electrospinning parameters on Poly(hydroxybutyrate) electrospun membranes fiber size and distribution
Poly(hydroxybutyrate) (PHB) obtained from sugar cane waste was dissolved in a blend of chloroform and dimethylformamide (DMF) and electrospun at 40 degrees C. By adding DMF to the solution, the electrospinning process for the PHB polymer becomes more stable, allowing complete polymer crystallization during the jet travelling between the tip and the grounded collector. The influence of processing parameters on fiber size and distribution was systematically studied. It was observed that an increase of tip inner diameter promotes a decrease of the fiber average size and a broader distribution. Conversely, an increase of the electric field and flow rate produces an increase of fiber diameter until a maximum of similar to 2.0 mu m but for electric fields higher than 1.5 kV cm(-1), a decrease of the fiber diameter was observed. Polymer crystalline phase seems to be independent of the processing conditions and a crystallinity degree of 53% was found. Moreover, thermal degradation of the as-spun membrane occurs in single step degradation with activation energy of 91 kJ mol(-1). Furthermore, MC-3T3-E1 cell adhesion was not inhibited by the fiber mats preparation, indicating their potential use for biomedical applications., Contract grant sponsor: FEDER; contract grant sponsor: Programa Operacional Factores de Competitividade-COMPETE; contract grant sponsor: FCT-Fundacao para a Ciencia e a Tecnologia; contract grant numbers: NANO/NMed-SD/0156/2007, PTDC/CTM/73030/2006, and PTDC/CTM/69316/2006; contract grant sponsor: COST Action MP1003, 2010 'European Scientific Network for Artificial Muscles'; contract grant sponsor: FCT; contract grant numbers: SFRH/BPD/63148/2009 and SFRH/BD/82411/2011; contract grant sponsor: IINL; contract grant sponsor: Spanish Ministry of Science and Innovation (including the FEDER financial support); contract grant number: MAT2010-21611-C03-01; contract grant sponsors: VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, and Instituto de Salud Carlos III (with assistance from the European Regional Development Fund).
Project:
Fundação para a Ciência e a Tecnologia / SFRH SFRH
,
Portugal / SFRH SFRH
,
Fundação para a Ciência e a Tecnologia / 5876-PPCDTI 109368
,
Portugal / 5876-PPCDTI 73030
,
Fundação para a Ciência e a Tecnologia / 5876-PPCDTI 69316
,
Portugal / POCI 39723
,
Fundação para a Ciência e a Tecnologia MP1003
,
Portugal MAT2010-21611-C03-01