Skip to main content

DISPOSITIVOS Y SISTEMAS FOTONICOS SENSORES PARA ESTRUCTURAS INTELIGENTES Y EVALUACION NO DESTRUCTIVA II

PID2019-107270RB-C22

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Láser random de fibra óptica asistido por reflectores de fibra con retrodispersión controlada artificialmente, Optical fiber random laser assisted by artificially controlled backscattering fiber reflectors

  • Pérez Herrera, Rosa Ana
  • Roldán Varona, Pablo
  • Galarza Galarza, Marko
  • Sañudo-Lasagabaster Ibáñez, Silvia
  • Rodríguez Cobo, Luis
  • López Higuera, José Miguel
  • López-Amo Sáinz, Manuel
Este trabajo presenta un láser de fibra tipo random (LFR) en cavidad semi-abierta, mediante amplificación híbrida Raman-Erbio y asistida por reflectores de fibra con retrodispersión controlada artificialmente (RFRCA). Como medio activo se ha empleado una combinación de 2,4 km de fibra compensadora de dispersión con dos tramos de fibra altamente dopada con erbio de 5 m cada uno. Se ha obtenido una única línea de emisión láser centrada a en 1553.8 nm y con una relación señal a ruido óptica de 47 dB cuando en la estructura se inyectaba una potencia de bombeo de 37.5 dBm. Además, se ha medido la estabilidad en términos de potencia de salida de este láser durante 3 horas, obteniendo una inestabilidad tan baja como 0,08 dB con un nivel de confianza del 100%., This work shows a semi-open cavity random type fiber laser (RFL), using hybrid Raman- Erbium amplification and assisted by artificially controlled backscattering fiber reflectors (RFRCA). As active medium, a combination of 2.4 km of dispersion compensating fiber with two sections of highly erbium doped fiber of 5 m each has been used. A single random laser emission line centered at 1553.8 nm and with a signal-to-optical noise ratio of 47 dB was obtained when a pump power of 37.5 dBm was injected into the structure. In addition, the stability in terms of output power of this laser has been measured along 3 hours, obtaining an instability as low as 0.08 dB with a 100% confidence level., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovación y la Agencia Estatal de Investigación (PID2019-107270RB), fondos FEDER, el Ministerio de Educación, Cultura y Deporte de España (Beca FPU2018/02797), y los Proyectos de Jóvenes Investigadores de la UPNA 2019 (PJUPNA1928).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Erbium-doped fiber ring cavity for the measurement of refractive index variations

  • Pérez Herrera, Rosa Ana
  • Soares, Liliana
  • Novais, Susana
  • Frazão, Orlando
  • Silva, Susana
In this work, an erbium-doped fiber ring cavity based on a 3dB optical coupler for refractive index measurements is presented and experimentally verified. This interrogation system, based on a 1 x 2 optical coupler, uses one of these output ports to increase the reflected optical power by means of a fiber Bragg Grating (FBG), used as a reflector. Moreover, the other output port is used as a refractive index sensing head. A spectral analysis of this interrogator system as well as a fiber cavity ring refractive index sensor characterization are carried out. Finally, an experimental comparison of the refractive index sensor range when the 3dB coupler is replace by a 1x3 one is also presented., This work is financed by the program “José Castillejo para estancias de movilidad en el extranjero de jóvenes doctores”, funded by the Ministerio de Universidades of Spain (reference CAS21/00351); project PID2019-107270RB-C22, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”; projects PDC2021-121172-C21 and TED2021-130378B-C22 funded by MCIN/AEI/10.13039/501100011033 and European Union “Next generation EU”/PTR; and National Funds through the Portuguese funding agency, FCT—Fundação para a Ciência e a Tecnologia, within project UIDB/50014/2020 and FCT, Portugal through the Grant 2020.05297.BD
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Compensation of laser phase noise in coded distributed acoustic sensing

  • Piñeiro Ben, Enrique
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We demonstrate, for the first time to our knowledge, a technique for the compensation of phase noise effects in coded pulse compression DAS and compare its performance to systems using frequency-modulated pulse compression., PID2019-107270RB-C22/AEI/10.13039/501100011033. PID2022-137269OB-C21/AEI.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Aluminum coated fiber optic sensor for enhancing flow rate measurement

  • Rodríguez Rodríguez, Armando
  • Urroz Unzueta, José Carlos
  • Diéguez Elizondo, Pedro
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
  • López Rodríguez, José Javier
A water flow and velocity aluminum-coated Fiber Bragg Grating sensor system for open channels was designed, simulated and tested. The sensing head was designed, ruggedized and customized to measure velocities at different depths, in order to calculate the discharge in open channels. This paper shows, for the first time to our knowledge, the simulation of such kind of fiber sensors in open channels., This work was supported in part by projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”, and TED2021-130378B-C22 funded by MCIN/AEI/10.13039/501100011033 and European Union “Next generation EU”/PTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Micro-displacement sensor based on hollow core fiber interferometers

  • Sánchez González, Arturo
  • Rodríguez Rodríguez, Armando
  • Dauliat, Romain
  • Jamier, Raphael
  • Roy, Philippe
  • Pérez Herrera, Rosa Ana
  • López-Amo Sáinz, Manuel
An interferometric sensor based on hollow core fibers for the measurement of micro-displacement has been designed. Its characterization has resulted in a linear response, suggesting its application in pressure sensors., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER "A way to make Europe", and PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033 and European Union "Next generationEU"/PTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Medida de torsión en seguidores solares con sensores de fibra óptica, Torsion measurements on solar trackers using fiber optic sensors

  • Leandro González, Daniel
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
  • Loayssa Lara, Alayn
  • Júdez Colorado, Aitor
  • Mariñelarena Ollacarizqueta, Jon
  • Falcone Lanas, Francisco
  • Jiménez Romero, Sergio
  • Moriana García, Iñaki
En este trabajo se ha monitorizado la torsión sufrida por una estructura de seguidores solares empleando sensores de fibra óptica. Estas medidas de campo se han obtenido con una red de sensores formada por 45 redes de difracción de Bragg en una huerta solar activa. Estos resultados, correlados con la velocidad y dirección del viento permitirían aumentar la eficiencia de los seguidores y ayudar a entender y prevenir efectos negativos relacionados con inestabilidades aeroelásticas., In this work, the torsion experienced by set of solar trackers is monitored using fiber optic sensors. The in-field measurements were obtained using a sensor network comprising 45 fiber Bragg gratings in an active solar plant. These results, correlated with wind speed and direction could increase efficiency and lead to understand and prevent harmful effects related to aeroelastic instability events., Este trabajo ha sido financiado por el proyecto WINDSOLAR (0011-1365-2017-000122) del Gobierno de Navarra, los proyectos TEC2016-76021-C2 y PID2019-107270RB-C22, los fondos FEDER, la European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143 y las fundaciones 'Caja Navarra' y 'la Caixa' con el proyecto LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Development of a water flow and velocity optical fiber sensor for field testing

  • Rodríguez Rodríguez, Armando
  • Urroz Unzueta, José Carlos
  • Diéguez Elizondo, Pedro
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
  • López Rodríguez, José Javier
A water flow and velocity fiber optic sensor system was developed and tested. The sensing head was especially developed and ruggedized to measure velocities at different depths, in order to calculate the discharge in channels., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER "A way to make Europe", and PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033 and European Union "Next generation EU"/PTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Measurement of paracetamol concentration using a fiber laser system

  • Soares, Liliana
  • Pérez Herrera, Rosa Ana
  • Novais, Susana
  • Ferreira, António
  • Frazão, Orlando
  • Silva, Susana
A linear fiber laser system for measurements of paracetamol concentration is experimentally demonstrated. The cavity is based on a fiber loop mirror and an FBG centered at 1567.8 nm. The sensing head corresponds to a refractometric sensor, whose which principle of operation is based on Fresnel reflection in the fiber tip (FBG side). The system works at detected variations of paracetamol concentrations with a sensitivity of [8.74± 0.34)× 10-5] µW/(g/kg) and a resolution of 2.77 g/kg. The results prove that the fiber laser system could be an asset for processing industries, specifically for non-invasive and real-time measurements of concentration., This work was financially supported by the Wellcome Trust, UK, through the Innovator Award “Light-activated cap for catheter sterilization” (WT223940/Z/21/Z); National Funds through FCT/MCTES (PIDDAC), within projects LA/P/0045/2020 (ALiCE), UIDB/00511/2020 and UIDP/00511/2020 (LEPABE); Program “José Castillejo para estancias de movilidad en el extranjero de jóvenes doctores”, funded by the Ministerio de Univesidades of Spain (reference CAS21/00351); project PID2019-107270RB-C22, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”; projects PDC2021-121172-C21 and TED2021- 130378B-C22 funded by MCIN/ AEI/10.13039/501100011033 and European Union “Next generation EU”/PTR. Liliana Soares acknowledges the support of FCT, Portugal, through the Grant 2020.05297.BD.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

One-year analysis of road condition using FBG arrays

  • Corera Orzanco, Íñigo
  • Pradas Martínez, Javier
  • Leandro González, Daniel
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
In this work, it is presented an analysis of FBG arrays installed in a public road. The arrays were installed in a newly paved urban road and were monitored for more than one year. The study evidences the permanent deformation of the wearing course and the degradation of the reflected spectra of the sensors., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”, and PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033 and European Union “Next generationEU”/PTR and the project PJUPNA06-2022 from the Public University of Navarre and the Beatriz Galindo BEAGAL18/00116 grant funded by MICINN.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Long-range and high-resolution traffic monitoring based on pulse-compression DAS and advanced vehicle tracking algorithm

  • Corera Orzanco, Íñigo
  • Piñeiro Ben, Enrique
  • Navallas Irujo, Javier
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We demonstrate traffic monitoring over tens of kilometres of road using an enhanced distributed acoustic sensing system based on optical pulse compression and a novel transformed-domain-based processing scheme with enhanced vehicle detection and tracking capabilities., This work was supported in part by European Union “Next generationEU”/PRTR and MCIN/AEI/10.13039/501100011033 under grant PDC2021-121172-C21, in part by FEDER ”A way to make Europe” and MCIN/AEI/10.13039/501100011033 under grant PID2019-107270RB, and in part by Gobierno de Navarra under grant PC210-211 FIBRATRAFIC. The authors would like to thank Gobierno de Navarra and NASERTIC S.A.U for their support by giving access to the dark fiber deployed in this work.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Diseño y caracterización de reflectores incoherentes de retrodispersión de fibra microperforada para láseres random de fibra óptica, Design and characterization of incoherent backscattering microdrilled fiber reflectors for random fiber optic lasers

  • Galarza Galarza, Marko
  • Sañudo-Lasagabaster Ibáñez, Silvia
  • Pérez Herrera, Rosa Ana
  • Roldán Varona, Pablo
  • Rodríguez Cobo, Luis
  • López Higuera, José Miguel
  • López-Amo Sáinz, Manuel
Los láseres random de fibra óptica presentan una serie de características que los hacen idóneos para una gran variedad de aplicaciones industriales. La elevada longitud de fibra necesaria en la cavidad debido a sus bajos índices de dispersión Rayleigh, se reduce utilizando fibras de baja área efectiva (compensadoras de dispersión), o generando artificialmente elementos muy dispersivos. En este trabajo presentamos el diseño de reflectores aleatorios de tan solo varios milímetros, generados mediante microperforación del núcleo con un láser de femtosegundo y su utilización en la cavidad de una estructura láser., Random fiber lasers show very interesting features for many industrial applications. The length of the fiber needed in the cavity reaches several tenths of kilometers due to the low Rayleigh dispersion coefficient. Using dispersion compensating fibers (fibers with small effective area) reduces this length, as well as using artificially generated dispersive elements. We present the design of random reflectors generated using a femtosecond laser to create the defects, which are only several millimeters long. The reflectors are used in a fiber laser structures and measured., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovación y la Agencia Estatal de Investigación (PID2019-107270RB), fondos FEDER, el Ministerio de Educación, Cultura y Deporte de España (Beca FPU2018/02797), y los Proyectos de Jóvenes Investigadores de la UPNA 2019 (PJUPNA1928).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Multicore fiber sensors for strain measurement towards traffic monitoring

  • Sánchez González, Arturo
  • Pradas Martínez, Javier
  • Corera Orzanco, Íñigo
  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Dauliat, Romain
  • Jamier, Raphael
  • Roy, Philippe
  • Pérez Herrera, Rosa Ana
  • López-Amo Sáinz, Manuel
In this work, two new interferometric sensors based on multicore optical fibers for the measurement of strain with the ultimate goal of traffic monitoring are presented. The operating principle of each sensor relied on the monitoring of the phase shift difference accumulated between the supermodes of the structure of the multicore segment in a full round trip. The strain characterization for both sensors resulted in a linear response, with sensitivities of -4.073·10-3 rad/με and - 4.389·10-3 rad/με for the aligned and V-shaped cases respectively, and one-hour instabilities below 4.6·10-3 rad with a 95% confidence level. These results suggest its feasibility in applications requiring high sensitivities over very wide strain ranges, such as heavy-vehicle traffic monitoring. To corroborate the hypothesis, both sensors were integrated into the pavement and their response to the traffic was analyzed., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”, and PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033 and European Union “Next generationEU”/PTR and the project PJUPNA06-2022 from the Public University of Navarre and the Beatriz Galindo BEAGAL18/00116 grant funded by MICINN.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Sistema de interrogación multi-sensor basado en multiplexación en longitud de onda y tiempo, Multi-sensor interrogation system based on wavelength and time multiplexing

  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Pérez González, Asier
  • López-Amo Sáinz, Manuel
En este trabajo se propone un sistema de interrogación versátil y económico basada en la generación de pulsos empleando la modulación directa de diodos láser DFB. Se ha demostrado una resolución en longitud de onda de 1 pm para una separación de sensores de 600m. La validación del interrogador se ha llevado a cabo monitorizando una red de sensores de 26 km de longitud que incluye redes de difracción de Bragg, reflectores y un interferómetro Fabry-Pérot., This work proposes a versatile and cost-effective interrogation system based on pulses generation using direct modulated DFB laser diodes. A wavelength resolution of 1 pm is demonstrated for a 600 m sensor-spacing. A 26 km-long sensor network including fiber Bragg gratings, wideband reflectors and a Fabry-Pérot interferometer is used to validate the interrogator., Este trabajo ha sido financiado por los proyectos TEC2016-76021-C2 y PID2019-107270RB-C22, los fondos FEDER, la European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143, el contrato Beatriz Galindo BEAGAL18/00116 y las fundaciones 'Caja Navarra' y 'la Caixa' con el proyecto LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Quasi-distributed vibration analysis of a cantilever beam using OFDR and weak reflectors

  • Leandro González, Daniel
  • Zhu, Mengshi
  • Wada, Daichi
  • Kasai, Tokio
  • Igawa, Hirotaka
  • López-Amo Sáinz, Manuel
  • Murayama, Hideaki
This work evaluates the performance of a quasi-distributed in-line velocimeter based on OFDR and weak reflectors to measure vibration every 10 cm, using a cantilever beam under free-end damping and during an impact-hammer test., The project leading to these results has received funding from “la Caixa” Foundation, under agreement CF/PR/PR13/51080004 and from the project PID2019-107270RB, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Time-transformed spectral analysis for multiparametric sensing using a single antiresonant interferometer

  • Jaso Gallego, Isabel
  • Sánchez González, Arturo
  • Bravo Acha, Mikel
  • Pérez Herrera, Rosa Ana
  • Leandro González, Daniel
This work explores the potential of spectral composition analysis in the time-transformed domain for multiparametric sensing using a single in-line hollow-core interferometer. By effectively distinguishing between antiresonance guidance and Fabry Perot-induced contributions, this approach allows simultaneous measurement of two independent parameters. The sensor, featuring polyimide coating, was characterized during humidity cycles at varying temperatures by monitoring phase variations in the transformed domain. The distinct sensitivities of antiresonance and Fabry-Perot components allowed the determination of temperature and relative humidity using a multiparametric linear model, achieving good agreement with experimental results and underscoring its robustness for multiparametric sensing applications., This work was supported in part by projects PID2019-107270RB-C22, PID2022-137269OB-C21 funded by MCIN/AEI/10.13039/501100011033 and FEDER 'A way to make Europe', projects PDC2021-121172-C21, TED2021-130378B-C22 funded by MCIN/AEI/10.13039/501100011033 and European Union 'Next generation EU'/PRTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Stable L-band fiber laser sensor using a backscattering-based multimode fiber reflector

  • Pérez Herrera, Rosa Ana
  • Roldán Varona, Pablo
  • Sánchez González, Arturo
  • Durán Lázaro, María
  • Rodríguez Cobo, Luis
  • López Higuera, José Miguel
  • López-Amo Sáinz, Manuel
A new and highly stable L-band fiber laser for sensing is demonstrated. An emission line at 1575.47 nm, was achieved using a special reflector. Good strain sensitivity, optical signal to noise ratio and output power stability were measured., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”, PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033, the Ministerio de Educación, Cultura y Deporte of Spain (PhD grant FPU2018/02797), and European Union “Next generationEU”/PTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Láseres de fibra óptica basados en reflectores clásicos, estrechados y microperforados, Optical fiber lasers based on classic, tapered and micro-drilled mirrors

  • Sánchez González, Arturo
  • Pérez Herrera, Rosa Ana
  • Roldán Varona, Pablo
  • Rodríguez Cobo, Luis
  • López Higuera, José Miguel
  • López-Amo Sáinz, Manuel
En este trabajo se presenta un estudio comparativo entre distintos láseres de fibra óptica altamente dopada con erbio, con cavidades lineales conformadas tanto por reflectores puntuales clásicos como reflectores distribuidos. El estudio analiza experimentalmente las principales prestaciones de cada configuración, destacando las mejoras en estabilidad de emisión y estrechamiento de línea alcanzadas con fibras estrechadas microperforadas., This work presents a comparative study between different linear cavity highly erbiumdoped fiber lasers, both by means of classic point reflectors and newly developed distributed reflectors. The study analyzes the main parameters of each configuration, highlighting the enhancement in emission stability and line narrowing achieved with micro-drilled tapered fibers., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovación y la Agencia Estatal de Investigación (PID2019-107270RB), fondos FEDER, el Ministerio de Educación, Cultura y Deporte de España (Beca FPU2018/02797), y los Proyectos de Jóvenes Investigadores de la UPNA 2019 (PJUPNA1928).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Femtosecond laser inscription of diffraction gratings in CYTOP fibers for optical fiber sensing

  • Lomer, Mauro
  • Roldán Varona, Pablo
  • Algorri, J. F.
  • Rodríguez Cobo, Luis
  • Pérez Herrera, Rosa Ana
  • López-Amo Sáinz, Manuel
  • López Higuera, José Miguel
The use of the new CYTOP fibers for the inscription of optical structures and the sensing of different parameters has started to gain importance in the last decade. This work presents the design and manufacture of a CYTOP fiber-based optical structure intended for later use as a refractive index sensor. The structure is based on a diffraction grating inscribed in an area of the fiber with a specific curvature, and previously polished., This work has been supported by the FEDER/Ministerio de Ciencia, Innovación y Universidades and Agencia Estatal de Investigación (RTC-2017-6321-1, PID2019-107270RB-C21 and PID2019-107270RB-C22), the Ministerio de Educación, Cultura y Deporte of Spain (PhD grant FPU2018/02797), and Projects for young researches UPNA 2019.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Compensation of phase-noise in pulse-compression phase-sensitive OTDR sensors

  • Piñeiro Ben, Enrique
  • Sagüés García, Mikel
  • Eyal, Avishay
  • Loayssa Lara, Alayn
We introduce a technique to compensate the performance impairments due to the laser phase noise in long-range pulse-compression DAS sensors. Experiments demonstrate the use of the longest duration pulse compression waveform to date., This work was supported in part by European Union "Next generationEU"/PRTR and MCIN/AEI/10.13039/501100011033 under grant PDC2021-121172-C21, in part by FEDER "A way to make Europe"and MCIN/AEI/10.13039/501100011033 under grant PID2019-107270RB, in part by Gobierno de Navarra under grant PC210-211 FIBRATRAFIC, and in part by the Israeli Science Foundation (ISF) under grant number 2675/20.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Fiber optic mirror fabrication using general-purpose metallic pigments

  • Jaso Gallego, Isabel
  • Mejia-Olivo, Edison
  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
In this work, the potential of using general-purpose paints to fabricate highly reflective, low-cost optical mirrors is evaluated. The study shows that high-reflectivity mirrors can be created in standard single-mode fiber in a reliable, simple and economic manner using the appropriate metallic paint. Preliminary results confirm that the grain size of the metallic particles is a crucial factor in the reflective behavior, together with the substrate in which the particles are suspended. Moreover, interferometric patterns have been observed in some cases, which could lead to the creation of simple and economic fiber optic sensors., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”, TED2021-130378B-C22, funded by MCIN/AEI/10.13039/501100011033 and European Union “Next generation EU”/PTR, and PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033 and European Union “Next generationEU”/PTR and the project PJUPNA06-2022 from the Public University of Navarre and the Beatriz Galindo BEAGAL18/00116 grant funded by MICINN.