Skip to main content

LUCHANDO CONTRA LA DEGRADACION DEL PATRIMONIO PETREO DEBIDO AL CAMBIO CLIMATICO CON RECUBRIMIENTOS DE NANOMATERIALES SOSTENIBLES

PID2020-120439RA-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE LEÓN

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Nanocristales de quitina y sus híbridos funcionales con potenciales aplicaciones en energía y sostenibilidad

  • Calvo Peña, Víctor
  • Ulcuango, Matías
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen de la comunicación oral presentada en la 9ª Jornada de Jóvenes Investigadores de Física y Química de Aragón, celebrada el 16 de diciembre de 2021 en Zaragoza., Los biopolímeros nanoestructurados tienen propiedades excepcionales, se extraen de fuentes naturales y tienen el potencial de sustituir plásticos de fuentes no sostenibles, como el petróleo. Estas cualidades se deben a su tamaño en la nano-escala (entre 1 y 100 nm), siendo el más investigado la nanocelulosa en sus distintas variedades [1,2]. La quitina es el segundo biopolímero más abundante tras la celulosa y se encuentra en distintos seres vivos, por ejemplo, en los exoesqueletos de crustáceos y artrópodos, aportando rigidez y dureza [3]. La quitina se puede transformar en nanocristales de quitina (NCQ) a través de un proceso de hidrólisis ácida [4]. Distintas aplicaciones de los NCQ son la estabilización eficiente en agua de nanomateriales de carbono, la preparación de aerogeles o su uso como refuerzo de otros materiales [5,6]. En este trabajo se presenta un método optimizado para la obtención de NCQ dispersos en agua con un rendimiento superior al 60% frente al 30% del método inicial. Se han caracterizado por diversas técnicas como difracción de rayos X, termogravimetría o microscopía de transmisión electrónica. Se ha probado también la capacidad de redispersión de los NCQ tras liofilizarlos, obteniendo una dispersión de calidad similar tras un proceso sencillo basado en ultrasonidos, lo cual no sucede con otros biopolímeros nanoestructurados, como los nanocristales de celulosa. Se ha probado el uso de NCQ como dispersante en tintas tanto de nanotubos de carbono como de nanofibras de carbono y su integración in situ y ex situ como refuerzo en xerogeles de nanocelulosa bacteriana. En definitiva, la presente comunicación demuestra el enorme potencial de NCQ como agente dispersante, refuerzo, y aditivo sostenible para obtener desde una perspectiva verde una variedad de nanomateriales compuestos., Financiación del MICINN/AEI bajo los proyectos PID2019-104272RB-C51/ AEI/10.13039/501100011033 y PID2020-120439RA-I00, y del Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_20R). Víctor C. agradece a la DGA por la financiación de su contrato predoctoral (Ref. CUS/581/2020).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Green processing of carbon nanofibers via cellulose nanocrystals and its relevance towards sustainable e-textiles

  • González Domínguez, José Miguel
  • Calvo Peña, Víctor
  • Paleo, A. J.
  • Muñoz Tavera, Enrique
  • Krause, Beate
  • Pötschke, Petra
  • Maser, Wolfgang K.
  • Benito, Ana M.
1 figure.-- Abstract of the poster presented at the ChemOnTubes 2024 conference, 7-11 April 2024, Strasbourg (France)., Cellulose nanocrystals (CNCs) are a kind of nanostructured biopolymer with unique properties, such as high resistance and water stability [1,2]. Its synthesis is possible through different top-down methods, chemically or physically breaking down the amorphous parts of cellulose. Among these methods, acid hydrolysis is one-pot and allows selecting the cellulose allomorph by only varying the experimental conditions [2]. On the other hand, carbon nanomaterials, such as carbon nanofibers (CNFs), can be integrated into textiles to produce flexible electronic devices. However, it is necessary to use organic solvents or high concentrations of surfactants in water for their dispersion in a liquid medium. CNCs offer a greener alternative, as they have been proved to efficiently disperse different hydrophobic carbon nanomaterials in water [1]. In this study (Figure 1), CNCs were successfully used to prepare aqueous dispersions of CNFs, for the first time and with concentrations of up to 0.7 g L-1 of CNFs [3]. The dispersions, referred to as inks, were characterized with different techniques. Furthermore, as a proof of concept, these inks were integrated into a cotton fabric by a tailored dip coating, resulting in a fabric with thermoelectric properties and a negative Seebeck coefficient. The endurance was tested by washing the textiles under conditions similar to domestic and industrial automated washing. Overall, the obtained results pave the way towards the development of more sustainable and durable wearable electronic textiles, enabled by green aqueous dispersions of CNFs., Funds have been received from the Recognized Research Group T03_23R funded by Government of Aragon (DGA) and the NANOSHIELD project (PID2020-120439RA-I00) from Spanish MICINN Ministry., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Sustainable fabrication of carbon nanotube electrodes based on chitin nanocrystals: unraveling Faradaic charge transfer phenomena

  • Calvo Peña, Víctor
  • Martínez-Barón, Carlos
  • Vázquez Conejo, Benjamín
  • Domínguez Alfaro, Antonio
  • Paleo, Antonio J.
  • Ansón-Casaos, Alejandro
  • González Domínguez, José Miguel
  • Maser, Wolfgang K.
  • Benito, Ana M.
Work presented at the XXV Meeting of The Portuguese Electrochemical Society (SPE2023), 30th august-1st september 2023, Coimbra (Portugal), The use of carbon nanomaterials is widespread in the scientific community due to their excellent optoelectronic and mechanical properties. In particular, carbon nanotubes (CNTs) are typically employed in electrochemical devices for different purposes, ranging from sensing to energy storage applications [1]. An effective way to transfer CNT properties from the nano- to the microscale level is by preparing CNTs-based films [1 – 3]. Commonly, CNTs are dispersed in organic solvents or water by means of surfactants, which can be detrimental for the final application. Aiming to develop sustainable CNT electrodes, chitin nanocrystals (ChNCs) emerge as a promising adjuvant towards the fabrication of waterborne environmentally-friendly CNTs inks. The present work demonstrates the feasibility of ChNCs to render stable aqueous inks of CNTs. These inks were subsequently employed for the preparation of film electrodes over glass substrates by means of spray coating. Once deposited, thickness and surface morphology of the CNT conductive films were evaluated, unraveling remarkable electrical conductivities ranging from 4.1 to 9.5 (S·cm-1). Furthermore, electrochemical measurements of the CNTs/ChNCs electrodes were carried out in a three-electrode cell. Faradaic transfer properties were evaluated using three different redox probes: ferricyanide, ascorbic acid and hydroquinone. For instance, cyclic voltammograms using the ferricyanide probe revealed enhanced charge transfer phenomena when thermally treating both CNTs/ChNCs electrodes in inert atmosphere. This fact has been supported by the standard electrochemical rate constant (k0), which decreased one order of magnitude in both cases after the thermal treatment, having a k0 of 4.1·10-5 for SWCNTs and 3.6·10-4 (cm·s-1) for MWCNTs. These values are in the range of other electrode materials [3, 4], revealing the potential of the herein shown approach., Spanish MICINN/AEI (PID2019-104272RB-C51/AEI/10.13039/501100011033, PID2020-120439RA-I00), Spanish CSIC (PIE iniciación, ref. 202280I007), Gobierno de Aragón (DGA- T03_23R and CUS/581/2020)., Peer reviewed