Skip to main content

CONTROL AVANZADO DE CONVERTIDORES DE FUENTE DE CORRIENTE (CSI) MONOFASICOS Y TRIFASICOS

PID2021-122821NB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2021
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Control y análisis de la dinámica cero en inversores trifásicos de fuente de corriente mediante un modelo de variables de estado complejas

  • Rahimi, Leila
  • Dòria Cerezo, Arnau|||0000-0001-9352-066X
  • Griñó Cubero, Robert|||0000-0001-6045-4600
Este trabajo analiza la dinámica cero de inversores de fuente de corriente trifásicos alimentados desde una fuente de tensión y conectados a una carga resistiva local o a la red eléctrica. El análisis de la dinámica cero concluye que, cuando la fuente de alimentación se modela a partir de su circuito equivalente de Thévenin, se producen problemas de estabilidad que se manifiestan en la corriente del bus cc, si el lazo de control fuerza un buen seguimiento de la tensión de salida. El artículo incluye el diseño de un controlador de bucle anidado alternativo que supera la inestabilidad interna de la corriente del inductor, Este trabajo ha sido financiado en parte por el Gobierno de España a través del programa Agencia Estatal de Investigación en Proyecto PID2021-122821NB-I00 y por la Generalitat de Catalunya a través del Proyecto 2021 SGR 00376. El trabajo de L. Rahimi está financiado por la beca 2022-FPU-UPC-36.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Dual active bridge simultaneous input admittance passivity shaping and reference tracking using low order H-infinity control

  • Pérez Ruiz, Juan José
  • Santamargarita Mayor, Daniel
  • Molinero Blanco, David
  • Huerta Sánchez, Francisco
  • Pizarro Pérez, Daniel
  • Cóbreces Álvarez, Santiago
  • Griñó Cubero, Robert|||0000-0001-6045-4600
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents a design methodology for the output voltage control loop of a dual active bridge (DAB). It is based on fixed-order H8 non-smooth synthesis combined with passivity restrictions over closed-loop impedance transfer function, known to have a critical impact on system voltage stability. The proposal inherits the advantages of modern techniques, making use of simple frequential weighting-based design and plant dynamical complexity black-boxing, while keeping controller complexity low., This work has been funded by BRONTE project (SBPLY/21/180501/000147), by the Junta de Comunidades de Castilla La Mancha and the European Union through the European Regional Development Fund; ASTRAPE project (CM/JIN/2021-019), financed by the Comunidad de Madrid in the framework of the Multiannual Agreement with the Universidad de Alcalá in the line of action ”Stimulus to the Research of Young Doctors”, within the V PRICIT framework program; and projects CRESIPSPE (PID2021-1256280B-C22) and OPEMRES (TED2021-130610B-C21) f inanced by Spanish Ministerio de Ciencia e Innovaci´ on, Agencia Estatal de Investigación and FEDER,UE 10.13039/501100011033. The work of Robert Griñ´ o was partially supported by the Government of Spain through the Agencia Estatal de Investigación Project PID2021-122821NB-I00 and by the Generalitat de Catalunya through the Project 2021 SGR 00376., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Sliding-mode control in the dq-reference frame for a three-phase CSI feeding an isolated load

  • Boira Pujol, Pau|||0009-0004-0674-2889
  • Dòria Cerezo, Arnau|||0000-0001-9352-066X
  • Griñó Cubero, Robert|||0000-0001-6045-4600
© 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper proposes a sliding-mode controller for a single-stage, three-phase current source inverter supplying an isolated load. The control architecture, derived from the dq model of the converter, features two cascaded loops: an inner slidingmode control loop that regulates the q-axis voltage component together with the DC current, and an outer proportional-integral control loop for the d-axis. In contrast to traditional linear methods, the proposed sliding-mode control enhances system robustness and transient performance, while the cascaded scheme overcomes the inherent non-minimum phase behaviour of boosttype converters. The effectiveness of the proposed control strategy is verified through numerical simulations, and its practical feasibility is demonstrated experimentally using a Hardware-in-the-Loop (HIL) platform., This work was supported by the Government of Spain through the Project PID2021-122821NB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU, and by the Generalitat de Catalunya through the Project 2021 SGR 00376., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Control PI basado en pasividad para un inversor trifásico de fuente de corriente alimentando una carga local

  • Boira Pujol, Pau|||0009-0004-0674-2889
  • Ortega, Romeo
  • Dòria Cerezo, Arnau|||0000-0001-9352-066X
  • Griñó Cubero, Robert|||0000-0001-6045-4600
Este artículo presenta el diseño de un controlador Proporcional-Integral basado en pasividad para un inversor trifásico de fuente de corriente alimentando una carga resistiva. Gracias a la definición de una nueva salida pasiva, se demuestra que el sistema en lazo cerrado es globalmente y asintóiticamente estable. Este resultado resuelve el problema de estabilidad interna señalado en trabajos anteriores para estos convertidores de potencia. Para reforzar el algoritmo de control, el artículo también incluye el diseño de un esquema de estimación de parámetros para las resistencias parásitas y la conductancia de carga. Se han realizado simulaciones numéricas para validar el algoritmo de control. Asimismo, se compara el comportamiento utilizando el modelo promediado del convertidor de potencia y un modelo de conmutación Hardware-in-the-Loop., Este trabajo ha sido soportado por el Gobierno de España a través del Proyecto PID2021-122821NB-I00 financiado por MICIU/AEI/10.13039/501100011033 y FEDER/UE, y por la Generalitat de Catalunya a través del Proyecto 2021 SGR 00376., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

PI Passivity-based control of a stand-alone three-phase current source inverter

  • Boira Pujol, Pau|||0009-0004-0674-2889
  • Ortega Martínez, Romeo
  • Dòria Cerezo, Arnau|||0000-0001-9352-066X
  • Griñó Cubero, Robert|||0000-0001-6045-4600
This paper presents the design of a Proportional-Integral Passivity-based Controller (PI-PBC) for a current source inverter feeding a resistive load. Thanks to the definition of a new passive output, the closed-loop system is shown to be globally asymptotically stable. This result solves the internal stability problem reported for these power converters. To robustify the control algorithm, the paper also includes the design of a parameter estimation scheme for the parasitic resistances and the load conductance. Numerical simulations are carried out to validate the control algorithm. The simulation stage compares the behaviour using the averaged model of the power converter and a more realistic switching model, including the three-phase implementation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Improved dynamic resource reservation-based AGV traffic control with optimized task allocation

  • Verma, Parikshit
  • Olm Miras, Josep Maria|||0000-0003-4925-9251
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
  • Toldrà Fernández, Pol
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Traffic management of multi-AGV fleets through improved dynamic resource reservation (IDRR) has been recently proven to be an interesting alternative within zone control-based approaches in terms of time completion efficiency in in-house transportation tasks. In this paper, preliminary results show that the combination of IDRR with PRIM allocation, a classical market-based task allocation strategy, yields a significant reduction of finishing times in a standard benchmark problem. Hence, further improvements are to be expected from deeper suitability analyses plus better tailored adaptations of optimal task allocation algorithms to zone control-based fleet management systems, and in particular to IDRR., P. Verma was supported by the Generalitat de Catalunya Project 2021 DI 16. J.M. Olm was partially supported by the Government of Spain Project PID2021-122821NB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU, and by the Generalitat de Catalunya Projects 2021 SGR 00376 and 2021 DI 16. R. Suarez was partially supported by the ´ Government of Spain Project PID2020-114819GB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU, and by the Generalitat de Catalunya Project 2021 DI 16., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Dual active bridge simultaneous input admittance passivity shaping and reference tracking using low order H-infinity control

  • Pérez Ruiz, Juan José
  • Santamargarita Mayor, Daniel
  • Molinero Blanco, David
  • Huerta Sánchez, Francisco
  • Pizarro Pérez, Daniel
  • Cóbreces Álvarez, Santiago
  • Griñó Cubero, Robert
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents a design methodology for the output voltage control loop of a dual active bridge (DAB). It is based on fixed-order H8 non-smooth synthesis combined with passivity restrictions over closed-loop impedance transfer function, known to have a critical impact on system voltage stability. The proposal inherits the advantages of modern techniques, making use of simple frequential weighting-based design and plant dynamical complexity black-boxing, while keeping controller complexity low., This work has been funded by BRONTE project (SBPLY/21/180501/000147), by the Junta de Comunidades de Castilla La Mancha and the European Union through the European Regional Development Fund; ASTRAPE project (CM/JIN/2021-019), financed by the Comunidad de Madrid in the framework of the Multiannual Agreement with the Universidad de Alcalá in the line of action ”Stimulus to the Research of Young Doctors”, within the V PRICIT framework program; and projects CRESIPSPE (PID2021-1256280B-C22) and OPEMRES (TED2021-130610B-C21) f inanced by Spanish Ministerio de Ciencia e Innovaci´ on, Agencia Estatal de Investigación and FEDER,UE 10.13039/501100011033. The work of Robert Griñ´ o was partially supported by the Government of Spain through the Agencia Estatal de Investigación Project PID2021-122821NB-I00 and by the Generalitat de Catalunya through the Project 2021 SGR 00376., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Improved dynamic resource reservation-based AGV traffic control with optimized task allocation

  • Verma, Parikshit
  • Olm Miras, Josep Maria
  • Suárez Feijóo, Raúl
  • Toldrà Fernández, Pol
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Traffic management of multi-AGV fleets through improved dynamic resource reservation (IDRR) has been recently proven to be an interesting alternative within zone control-based approaches in terms of time completion efficiency in in-house transportation tasks. In this paper, preliminary results show that the combination of IDRR with PRIM allocation, a classical market-based task allocation strategy, yields a significant reduction of finishing times in a standard benchmark problem. Hence, further improvements are to be expected from deeper suitability analyses plus better tailored adaptations of optimal task allocation algorithms to zone control-based fleet management systems, and in particular to IDRR., P. Verma was supported by the Generalitat de Catalunya Project 2021 DI 16. J.M. Olm was partially supported by the Government of Spain Project PID2021-122821NB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU, and by the Generalitat de Catalunya Projects 2021 SGR 00376 and 2021 DI 16. R. Suarez was partially supported by the ´ Government of Spain Project PID2020-114819GB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU, and by the Generalitat de Catalunya Project 2021 DI 16., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Control y análisis de la dinámica cero en inversores trifásicos de fuente de corriente mediante un modelo de variables de estado complejas

  • Rahimi, Leila
  • Dòria Cerezo, Arnau
  • Griñó Cubero, Robert
Este trabajo analiza la dinámica cero de inversores de fuente de corriente trifásicos alimentados desde una fuente de tensión y conectados a una carga resistiva local o a la red eléctrica. El análisis de la dinámica cero concluye que, cuando la fuente de alimentación se modela a partir de su circuito equivalente de Thévenin, se producen problemas de estabilidad que se manifiestan en la corriente del bus cc, si el lazo de control fuerza un buen seguimiento de la tensión de salida. El artículo incluye el diseño de un controlador de bucle anidado alternativo que supera la inestabilidad interna de la corriente del inductor, Este trabajo ha sido financiado en parte por el Gobierno de España a través del programa Agencia Estatal de Investigación en Proyecto PID2021-122821NB-I00 y por la Generalitat de Catalunya a través del Proyecto 2021 SGR 00376. El trabajo de L. Rahimi está financiado por la beca 2022-FPU-UPC-36., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Sliding-mode control in the dq-reference frame for a three-phase CSI feeding an isolated load

  • Boira Pujol, Pau
  • Dòria Cerezo, Arnau
  • Griñó Cubero, Robert
© 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper proposes a sliding-mode controller for a single-stage, three-phase current source inverter supplying an isolated load. The control architecture, derived from the dq model of the converter, features two cascaded loops: an inner slidingmode control loop that regulates the q-axis voltage component together with the DC current, and an outer proportional-integral control loop for the d-axis. In contrast to traditional linear methods, the proposed sliding-mode control enhances system robustness and transient performance, while the cascaded scheme overcomes the inherent non-minimum phase behaviour of boosttype converters. The effectiveness of the proposed control strategy is verified through numerical simulations, and its practical feasibility is demonstrated experimentally using a Hardware-in-the-Loop (HIL) platform., This work was supported by the Government of Spain through the Project PID2021-122821NB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU, and by the Generalitat de Catalunya through the Project 2021 SGR 00376., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

PI Passivity-based control of a stand-alone three-phase current source inverter

  • Boira Pujol, Pau
  • Ortega Martínez, Romeo
  • Dòria Cerezo, Arnau
  • Griñó Cubero, Robert
This paper presents the design of a Proportional-Integral Passivity-based Controller (PI-PBC) for a current source inverter feeding a resistive load. Thanks to the definition of a new passive output, the closed-loop system is shown to be globally asymptotically stable. This result solves the internal stability problem reported for these power converters. To robustify the control algorithm, the paper also includes the design of a parameter estimation scheme for the parasitic resistances and the load conductance. Numerical simulations are carried out to validate the control algorithm. The simulation stage compares the behaviour using the averaged model of the power converter and a more realistic switching model, including the three-phase implementation., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Control PI basado en pasividad para un inversor trifásico de fuente de corriente alimentando una carga local

  • Boira Pujol, Pau
  • Ortega, Romeo
  • Dòria Cerezo, Arnau
  • Griñó Cubero, Robert
Este artículo presenta el diseño de un controlador Proporcional-Integral basado en pasividad para un inversor trifásico de fuente de corriente alimentando una carga resistiva. Gracias a la definición de una nueva salida pasiva, se demuestra que el sistema en lazo cerrado es globalmente y asintóiticamente estable. Este resultado resuelve el problema de estabilidad interna señalado en trabajos anteriores para estos convertidores de potencia. Para reforzar el algoritmo de control, el artículo también incluye el diseño de un esquema de estimación de parámetros para las resistencias parásitas y la conductancia de carga. Se han realizado simulaciones numéricas para validar el algoritmo de control. Asimismo, se compara el comportamiento utilizando el modelo promediado del convertidor de potencia y un modelo de conmutación Hardware-in-the-Loop., Este trabajo ha sido soportado por el Gobierno de España a través del Proyecto PID2021-122821NB-I00 financiado por MICIU/AEI/10.13039/501100011033 y FEDER/UE, y por la Generalitat de Catalunya a través del Proyecto 2021 SGR 00376., Peer Reviewed, Postprint (author's final draft)