Skip to main content

CAPACIDADES INTRINSECAS PARA ROBOTS CO-TRABAJADORES

PID2020-114819GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 44
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Efficient Industrial Solution for Robotic Task Sequencing Problem With Mutual Collision Avoidance & Cycle Time Optimization

  • Touzani, Hicham
  • Seguy, Nicolas
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
  • Hadj Abdelkader, Hicham
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
  • Palomo Avellaneda, Leopold|||0000-0002-8734-1566
  • Bouchafa, Samia
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, In the automotive industry, several robots are required to simultaneously carry out welding sequences on the same vehicle. Coordinating and assigning welding points between robots is a manual and difficult phase that needs to be optimized using automatic tools. The cycle time of the cell strongly depends on different robotic factors such as the task allocation among the robots, the configuration solutions and obstacle avoidance. Moreover, a key aspect, often neglected in the state of the art, is to define a strategy to solve the robotic task sequencing with an effective robot-robot collision avoidance integration. In this paper, we present an efficient iterative algorithm that generates a high-quality solution for Multi-Robotic Task Sequencing Problem. This latter manages not only the mentioned robotic factors but also aspects related to accessibility constraints and mutual collision avoidance. In addition, a home-developed planner ( RoboTSPlanner ) handling 6 axis has been validated in a real case scenario. In order to ensure the completeness of the proposed methodology, we perform an optimization in the task, configuration and coordination space in a synergistic way. Comparing to the existing approaches, both simulation and real experiments reveal positive results in terms of cycle time and show the ability of this method to be interfaced with both industrial simulation software and ROS-I tools., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Task space vector field guiding for motion planning

  • Urra González, Fernando
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The article deals with the problem of planning in the task space in the presence of vector fields, while verifying and validating the constraints in the configuration space. The proposed approach, called the Task Space Vector Field Rapidly-exploring Random Tree (TSVF-RRT) algorithm, extends the Task-Space Rapidly-exploring Random Trees (TS-RRT) algorithm by incorporating vector fields into the task space, while avoiding non-trivial constraints on the configuration space. The planner restricts the search to a lower dimensional space, minimizing the upstream functional. To evaluate the proposed approach, graphical simulations are presented, carried out using a planar manipulator of 10 DOF. Possible advantages that encourage further research in this line are discussed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Human to robot hand motion mapping methods: review and classification

  • Meattini, Roberto
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
  • Palli, Gianluca
  • Melchiorri, Claudio
In this article, the variety of approaches proposed in literature to address the problem of mapping human to robot hand motions are summarized and discussed. We particularly attempt to organize under macro-categories the great quantity of presented methods, that are often difficult to be seen from a general point of view due to different fields of application, specific use of algorithms, terminology and declared goals of the mappings. Firstly, a brief historical overview is reported, in order to provide a look on the emergence of the human to robot hand mapping problem as a both conceptual and analytical challenge that is still open nowadays. Thereafter, the survey mainly focuses on a classification of modern mapping methods under six categories: direct joint, direct Cartesian, taskoriented, dimensionality reduction based, pose recognition based and hybrid mappings. For each of these categories, the general view that associates the related reported studies is provided, and representative references are highlighted. Finally, a concluding discussion along with the authors’ point of view regarding future desirable trends are reported., This work was supported in part by the European Commission’s Horizon 2020 Framework Programme with the project REMODEL under Grant 870133 and in part by the Spanish Government under Grant PID2020-114819GB-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Resolución geométrica de la cinemática inversa de un robot sin muñeca esférica

  • Palomo Avellaneda, Leopold|||0000-0002-8734-1566
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
  • Zaplana Agut, Isiah|||0000-0002-0862-3240
Una de las aplicaciones más conocidas del álgebra geométrica en la ingenierìa consiste en proporcionar una formulación compacta de la cinemática de los robots manipuladores serie. Sin embargo, el uso de álgebra geométrica en el campo de la robótica está aún en sus inicios, y todavía hay varios problemas abiertos que pueden ser tratados con esta elegante y compacta formulación. En esta línea, el presente artículo introduce una estrategia basada en el álgebra geométrica conforme para resolver el problema de la cinemática inversa para un robot manipulador de 6 grados de libertad (GdL) sin muñeca esférica, para el cual es conocido que el problema de la cinemática inversa no tiene, en general, solución analítica. Para ello, la estrategia propuesta en este artículo se basará en la explotación de las propiedades algebraicas y geométricas del álgebra geométrica conforme como, por ejemplo, que toda isometría se puede representar de manera compacta como un rotor, y que los objetos geométricos no son más que multivectores., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

FailRecOnt - An ontology-based framework for failure interpretation and recovery in planning and execution

  • Diab, Mohammed
  • Pomarlan, Mihai
  • Borgo, Stefano
  • Bebler, Daniel
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
  • Bateman, John
  • Beetz, Michael
Autonomous mobile robot manipulators have the potential to act as robot helpers at home to improve quality of life for various user populations, such as elderly or handicapped people, or to act as robot co-workers on factory floors, helping in assembly applications where collaborating with other operators may be required. However, robotic systems do not show robust performance when placed in environments that are not tightly controlled. An important cause of this is that failure handling often consists of scripted responses to foreseen complications, which leaves the robot vulnerable to new situations and ill-equipped to reason about failure and recovery strategies. Instead of libraries of hard-coded reactions that are expensive to develop and maintain, more sophisticated reasoning mechanisms are needed to handle failure. This requires an ontological characterization of what failure is, what concepts are useful to formulate causal explanations of failure, and integration with knowledge of available resources including the capabilities of the robot as well as those of other potential cooperative agents in the environment, e.g. a human user. We propose the FailRecOnt framework as a step in this direction. We have integrated an ontology for failure interpretation and recovery with a contingency-based task and motion planning framework such that a robot can deal with uncertainty, recover from failures, and deal with human-robot interactions. A motivating example has been introduced to justify this proposal. The proposal has been tested with a challenging scenario, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Computación frontera: influencia de latencias en la precisión de robots

  • Urbaniak, Dominik
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
  • Suppa, Michael
La computación en la frontera (edge computing) permite acceder a grandes recursos computacionales y a redes de computadores, facilitando que pequeños dispositivos con recursos limitados realicen cálculos complejos descargándolos en computadores potentes de la red, y permite que la latencia en la comunicación se pueda reducir en comparación con la computación en la nube (cloud computing). Los robots móviles autónomos podrían beneficiarse enormemente de computación en la frontera, ya que en general su energía y recursos computacionales son limitados, pero su uso les permitiría realizar tareas computacionalmente complejas y que requieran adaptaciones rápidas a un entorno cambiante. En este trabajo se realiza una comparación del impacto de las tecnologías de comunicación más destacadas usando como tarea de ensayo, en simulación con Gazebo y ROS2, la corrección de la orientación de un cubo al ser empujado por un robot manipulador UR5e equipado con una pinza de dedos paralelos Robotiq 2F-85. Los resultados muestran un mejor rendimiento de 5G Ultra Reliable Low-Latency Communication (URLLC) sobre las comunicaciones 5G y 4G privadas, reduciendo la media del error de orientación en un 36% y 55 %, respectivamente, tras haber realizado 50 acciones de corrección de la orientación con cada tecnología., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Development of neural networks to study flow behavior of medium carbon microalloyed steel during hot forming

  • Al Omar Mesnaoui, Anas|||0000-0002-9812-0769
  • Català Calderon, Pau|||0000-0003-1625-2539
  • Alcelay Larrión, José Ignacio|||0000-0001-9527-8918
  • Peña Pitarch, Esteve|||0000-0001-5986-5728
In the present article, the application of an artificial neural network (ANN) model whose function is the development of plastic instability maps of a medium carbon microalloyed steel during the hot forming process is studied. Secondly, we proceed to create another ANN capable of providing the recrystallized grain size in the steady state resulting from forming deformation. We start from the experimental data of a medium carbon microalloyed steel obtained by hot compression tests with strain rates that vary between 10-4 s-1 and 3 s-1 and in a range of temperatures between 900 °C and 1150 °C. These experimental data are used to train the proposed ANN and obtain flow curves. Finally, the processing maps are developed by applying the dynamic materials model (DMM), according to which the safe hot forming domains and the plastic instability domains of the studied material are delineated. The comparison between the ANN and the experimental maps is carried out. It is ascertained that the optimal regions of forging in the ANN maps coincide with those obtained in the experimental maps. In addition, a study of the influence of the microstructure on the behavior of the studied steel during hot forming is carried out., This research was funded by CICYT (Spain), through the research competitive project under grant number PID2020-114819GB-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

User-tailored fuzzy-based grasp strength regulation in myocontrolled robotic hands

  • Sheikhsamad, Mohammad|||0009-0004-6610-6569
  • Meattini, Roberto
  • Chiaravalli, Davide
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
  • Palli, Gianluca
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Myocontrolled robotic hands require accurate and responsive control to regulate grasp strength effectively. However, many human-in-the-loop (HITL) control systems still lack robust closed-loop solutions for fine grip force regulation, limiting their performance. This paper presents a novel control system for myocontrolled hands that combines contact force sensing and vibrotactile feedback to enable more natural and precise grasp interaction. The system features an advanced force controller based on fuzzy logic, with parameter optimization guided by user preferences collected through a graphical user interface (GUI) using Global Learning of Input–Output Strategies from Pairwise Preferences (GLISp). It is compared against heuristic model and neural network based controllers. The system was validated through real-world experiments using the AR10 robotic hand with OptoForce fingertip sensors, demonstrating improved adaptability and fine force regulation capabilities for the user., This work was partially supported by: • Project PID2020-114819GB-I00, funded by MICIU/AEI/10.13039/501100011033. • European Commission’s Horizon Europe Programme: IntelliMan (Grant 101070136); MUR project “Sustainable Mobility Center” (Grant CN00000023-CUP J33C22001120001); and the MICS Extended Partnership funded by the EU Next-GenerationEU (PNRR – Mission 4, Component 2, Investment 1.3 – D.D. 1551.11-10-2022, PE00000004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Symbolic and user-friendly geometric algebra routines (SUGAR) for computations in Matlab

  • Velasco García, Manel|||0000-0002-0764-3063
  • Zaplana Agut, Isiah|||0000-0002-0862-3240
  • Dòria Cerezo, Arnau|||0000-0001-9352-066X
  • Martí Colom, Pau|||0000-0002-5189-0782
Geometric Algebra (GA) provides a unified, compact mathematical framework for geometric computing, simplifying relations typically handled with more complex tools like matrix multiplication. In fields like robotics, GA replaces conventional coordinate-based approaches with the multiplication of special elements called rotors, offering greater efficiency. Despite its advantages, GA’s complexity and the lack of symbolic tools hinder its broader adoption among applied mathematicians and engineers. To address this, this article introduces Symbolic and User-friendly Geometric Algebra Routines (SUGAR), an open source Matlab toolbox. SUGAR streamlines GA usage in Matlab through a collection of user-friendly functions that support both numeric and symbolic computations, even in high-dimensional algebras. Designed for applied mathematics and engineering, it enables intuitive manipulation of geometric elements and transformations in two- and three-dimensional projective and conformal GAs, consistent with established computational methods. Moreover, SUGAR manages multivector functions such as exponential, logarithmic, sinusoidal, and cosine operations, enhancing its applicability in domains like robotics, control systems, and power electronics. Finally, this article also presents three validation examples across these fields, showcasing SUGAR’s practical utility in solving real-world engineering and applied mathematics problems., The work of I. Zaplana was partially supported by the Spanish National Project PID2020-114819GB-I00 funded by MI- CIU/AEI/10.13039/501100011033 and by the Generalitat de Catalunya through the Project 2021 SGR 00375. The work of A. Dòria-Cerezo was partially supported by the Spanish National Project PID2021-122821NB-I00 funded by MI- CIU/AEI/10.13039/501100011033 and ERDF/EU and by the Generalitat de Catalunya through the Project 2021 SGR 00376. M. Velasco, J. Duarte, and P. Martí were partially supported by the Spanish National Project PID2021-122835OB-C21 funded by MICIU/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Software package for efficient use of a robotic anthropomorphic hand

  • Pujol Closa, Marina|||0009-0005-2905-5608
  • Palomo Avellaneda, Leopold|||0000-0002-8734-1566
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The aim of this work is the development of a complete software package to exploit a robotic anthropomorphic hand, such as the Allegro Robotic Hand, allowing to easily perform accurate grasps. It includes the Inverse and the Forward Kinematics and allows storing different configurations as well as to perform and store predefined grasps while controlling the movement speed. The software presented in this document allows the easy use of the Allegro Robotic Hand, enhancing its capabilities and allowing further research on grasp theory by facilitating the experimental implementation. The software is designed to work with all the Allegro Hand versions despite their differences. It is an improved alternative to the manufacturer's version, offering a powerful framework for grasping. Besides, it has been designed to easily adapt to other robotic anthropomorphic hands., This work was partially supported by the Project PID2020-114819GB-I00 funded by MICIU/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Estudio, informe, memoria (Report)

La tecnología 5G como catalizadora de una nueva revolución industrial

  • Vinagre, Manuel
  • Calvo, V. J.
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
  • Serra, C.
  • Munduate, G.
Artículo sobre la aplicación de la tecnología 5G en el ámbito industrial., La sigla 5G representa la última generación de tecnología móvil caracterizada por ofrecer un ancho de banda y velocidades de transferencia sin precedentes respecto a las tecnologías predecesoras. En estos últimos años, entidades gubernamentales y grandes compañías han dejado patente su interés en el dominio del 5G, realizando múltiples esfuerzos en diferentes actuaciones y demostrando que se trata de una tecnología estratégica en la transformación digital de nuestra sociedad. El uso de la tecnología 5G habilita un nuevo porfolio de servicios revolucionarios en sectores de gran relevancia como la salud, industria o el transporte. La capacidad del 5G de gestionar millones de dispositivos en tiempo real abre un abanico de posibilidades inalcanzables hasta la fecha. Se pueden crear redes para la teleoperación de forma segura y en tiempo real de dispositivos como robots de cirugía, o bien redes para la gestión inteligente de sistemas de control distribuidos aplicables en modelos de fabricación flexible, o redes para la gestión activa del transporte y el tráfico mediante vehículos conectados, entre otras. La implantación de este salto tecnológico no está exenta de adversidades en términos económicos y de sostenibilidad dada la dimensión del cambio a nivel de infraestructura mundial. Por un lado, se requiere un plan de despliegue gradual para la transición desde el sistema actual 4G, cuyo alcance va muy por detrás de la rápida evolución tecnológica en el sector de las telecomunicaciones. Por otro lado, al ser un prometedor habilitador de la innovación digital y gran conectividad, aunque 5G es energéticamente más eficiente que el 4G, se estima un gran aumento de la contaminación derivada de la producción masiva de dispositivos asociados a los nuevos servicios digitales implantados gracias al 5G. Este artículo pretende introducir al lector a la tecnología 5G, describiendo el proceso de estandarización durante estos últimos años para afrontar los impedimentos de su implantación a medio plazo. A su vez, se describe su capacidad y fundamentos que permiten entender su potencial sobre todo enfocado al sector industrial. También se muestra las tendencias y desafíos vigentes del 5G en el despliegue de entornos industriales, concluyendo como una de las tecnologías con mayor impacto de los últimos tiempos, que abre el camino a una nueva era digital en la industria y en la sociedad en general.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Editorial: current challenges and future developments in robot grasping

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Improved dynamic resource reservation-based AGV traffic control with optimized task allocation

  • Verma, Parikshit
  • Olm Miras, Josep Maria|||0000-0003-4925-9251
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
  • Toldrà Fernández, Pol
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Traffic management of multi-AGV fleets through improved dynamic resource reservation (IDRR) has been recently proven to be an interesting alternative within zone control-based approaches in terms of time completion efficiency in in-house transportation tasks. In this paper, preliminary results show that the combination of IDRR with PRIM allocation, a classical market-based task allocation strategy, yields a significant reduction of finishing times in a standard benchmark problem. Hence, further improvements are to be expected from deeper suitability analyses plus better tailored adaptations of optimal task allocation algorithms to zone control-based fleet management systems, and in particular to IDRR., P. Verma was supported by the Generalitat de Catalunya Project 2021 DI 16. J.M. Olm was partially supported by the Government of Spain Project PID2021-122821NB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU, and by the Generalitat de Catalunya Projects 2021 SGR 00376 and 2021 DI 16. R. Suarez was partially supported by the ´ Government of Spain Project PID2020-114819GB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU, and by the Generalitat de Catalunya Project 2021 DI 16., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Introducing modeling, analysis, and control of three-phase electrical systems using geometric algebra

  • Velasco García, Manel|||0000-0002-0764-3063
  • Zaplana Agut, Isiah|||0000-0002-0862-3240
  • Dòria Cerezo, Arnau|||0000-0001-9352-066X
  • Duarte Mejía, Josué Neftali
  • Martí Colom, Pau|||0000-0002-5189-0782
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This article introduces a novel framework based on geometric algebra (GA) for the modeling, analysis, and control of three-phase electrical systems, with a focus on unbalanced scenarios. The proposed approach utilizes GA to represent these systems using simplified single-input/single-output (SISO) models, significantly reducing their mathematical complexity while maintaining accuracy. The framework introduces GA-valued transfer functions (GA-TFs), enabling the extension of well-established multivariable (MIMO) techniques, such as Youla-Kucera parameterization, into the GA domain as an illustrative example. This demonstrates the adaptability of classical tools within the new algebra. The validity and potential of the approach are showcased through numerical examples of balanced and unbalanced systems, as well as physical implementations in a laboratory setup. The results confirm that GA provides a robust and scalable foundation for simplifying the analysis and control of three-phase systems, paving the way for future theoretical and practical advancements., Received 13 June 2024; revised 16 September 2024, 9 December 2024, and 31 January 2025; accepted 8 March 2025. Date of publication 2 May 2025; date of current version 2 October 2025. The work of Manel Velasco, Josue Duarte, and Pau Mart ı was supported in part by Spanish National Project PID2021-122835OB-C21 under Grant MICIU/AEI/10.13039/501100011033; Isiah Zaplana was supported in part by Spanish National Project PID2020-114819GB-I00 under Grant MICIU/AEI/10.13039/501100011033; Arnau Doria-Cerezo was supported in part by Spanish National Project PID2021-122821NB-I00 under Grant MICIU/AEI/10.13039/501100011033 and ERDF/EU, and in part by the Generalitat de Catalunya through the Project 2021 SGR 00376. (Corresponding author: Manel Velasco.), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Efficient and robust trajectory generation for robotic manipulators

  • Ruiz Celada, Oriol|||0000-0002-6171-7270
  • Palomo Avellaneda, Leopold|||0000-0002-8734-1566
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper describes a procedure to generate valid robot trajectories for a given sequence of points defining a geometric path, which is a quite frequent output of many robot motion planners. The proposed approach takes into account physical constraints of the robot, as the maximum velocity and the maximum acceleration that each joint can reach, and has been implemented in C++ as a general tool that can be used with different robots., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Evaluation of grasp quality measures in real grasps

  • Zakariapour, Pouria
  • Palomo Avellaneda, Leopold|||0000-0002-8734-1566
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents the implementation of grasp quality measures in a real-world robotic setup. Specifically, the largest wrench that a grasp can resist due to perturbations in any direction has been computed considering both the actual contact points and the magnitude of the actual grasping forces. The experiments were done using the Allegro Hand with OptoForce tactile sensors and a Fastrak motion tracking system. In this work, the grasp quality measure was experimentally computed using different objects without needing their detailed geometric models, and numerical results are provided., This work was partially supported by the Project PID2020-114819GB-I00 funded by MICIU/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Capítulo o parte de un libro (BookPart)

Closed-form inverse kinematics solutions for a class of serial robots without spherical wrist using conformal geometric algebra

  • Marzabal Gatell, Arnau
  • Zaplana Agut, Isiah|||0000-0002-0862-3240
One of the most well-known applications of geometric algebra in engineering is providing a compact formulation of the kinematics of serial robotic manipulators. However, the use of geometric algebra in the field of robotics is still in its early stages, and there are still several open problems that can be addressed with this elegant and compact formulation. In this context, this work introduces a strategy based on conformal geometric algebra to solve the inverse kinematics problem for a class of 6DOF serial robots without a spherical wrist, for which it is known that the inverse kinematics problem generally does not have an analytical solution. To achieve this, a purely geometric strategy extending already existing contributions for the case where the robot has a spherical wrist is proposed. In particular, a point is assigned to each joint of the robot so that the problem reduces to computing the set of all possible joint positions for a given desired position and orientation of its end-effector. These points are found by defining and manipulating several geometric entities such as lines, planes, and spheres. Finally, validation with a real robot of the considered class is demonstrated both in simulation and experimentation., This work was partially supported by the European Commission’s Horizon Europe Framework Programme with the project Smarthandle (Resilient manufacturing lines based on smart handling systems) under Grant Agreement 101091792, and the Spanish Government through the project CaRo (Capacidades Intr´ınsecas para Robots Co-trabajadores) under Grant Agreement PID2020-114819GB-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Wrist model for the whole human hand

  • Peña Pitarch, Esteve|||0000-0001-5986-5728
A hand with 25 degrees of freedom (DOF) was proposed with forward and inverse kinematics for all fingers, with a realistic virtual simulation. However, the wrist is not in the model. Today, several authors have proposed in the literature that the wrist has a relative movement between the two rows of bones with eight bones. Some authors discuss a comparison of four joint coordinate systems previously described in the literature. Others propose a helical movement of wrist bones in distal movements. Objective: A new design the hand model of 25 DOF adding a movement of two rows and eight bones of the wrist. Methods: Once we locate a new coordinates system in the end of the radius close to the scaphoid, we apply Denavit-Hartenberg for all joints. Forward and inverse kinematics are applied. We include ten ligaments to apply restrictions in the wrist movement, which affects fingertip position. Results: A new model of a virtual human hand with more accuracy is presented and validated with a Cyberglove™ and Leap Motion. Conclusions: This new model that includes wrist movement yields a more accurate virtual human hand. New DOFs are added to the 25-DOF hand model., This work was partially supported for Spanish government by the project PID2020-114819GB-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Automating adaptive execution behaviors for robot manipulation

  • Ruiz Celada, Oriol|||0000-0002-6171-7270
  • Verma, Parikshit
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
  • Diab, Mohammed
Robotic manipulation in semi-structured and changing environments requires systems with: a) perception and reasoning capabilities able to capture and understand the state of the environment; b) planning and replanning capabilities at both symbolic and geometric levels; c) automatic and robust execution capabilities. To cope with these issues, this paper presents a framework with the following features. First, it uses perception and ontology-based reasoning procedures to obtain the Planning Description Domain Language files that describe the manipulation problem at task level. This is used in the planning stage as well as during task execution in order to adapt to new situations, if required. Second, the proposed framework is able to plan at both task and motion levels, intertwining them by incorporating geometric reasoning modules to determine some of the symbolic predicates needed to describe the states. Finally, the framework automatically generates the behavior trees required to execute the task. The proposal takes advantage of the ability of behavior trees to be edited during run time, allowing adaptation of the action plan or of the trajectories according to changes in the state of the environment. The approach allows for robot manipulation tasks to be automatically planned and robustly executed, contributing to achieve fully functional service robots., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Automatic generation of behavior trees for the execution of robotic manipulation tasks

  • Verma, Parikshit
  • Diab, Mohammed
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Robots should be able to exercise reasoning in both symbolic and geometric levels in order to plan a manipulation task. The execution of such tasks needs to be robust enough to cope with real environments. In an attempt to address this pertinent industry need, the paper proposes the use of behavior trees for effective robotic manipulation in dynamic environments. This paper presents a method to automatically generate a behavior tree and showcases its ability to enable the robot to reason at different levels and adapt to an uncertain and changing environment. This allows for a complex task to be robustly executed, pioneering the advancement towards fully functional service robots., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Analytical approach to reorient unknown objects via in-hand manipulation

  • Shirzadi Maryan, Morad
  • Zaplana Agut, Isiah|||0000-0002-0862-3240
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
This paper introduces a novel strategy to enhance the dexterous in-hand manipulation capabilities of robotic hands, focusing on reorienting unknown objects around any specified axis. The proposed method leverages tactile sensing and sensor-to-motor mapping to achieve precise and adaptive manipulation without prior object knowledge. The strategy employs circular finger movements to maintain stable and secure grasps, ensuring even pressure distribution. Preliminary experiments conducted with the Allegro robotic hand validate the efficacy of the approach across various orientations, demonstrating its potential for practical applications., This work was partially supported by the Project PID2020-114819GB-I00 funded by MICIU/AEI/10.13039/501100011033, Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Bayesian optimization for robust robotic grasping using a sensorized compliant hand

  • Lechuz-Sierra, Juan G.
  • Martín, Ana Elvira H.
  • Sundaram, Ashok M.
  • Martinez-Cantín, Rubén
  • Roa, Máximo A.
One of the first tasks we learn as children is to grasp objects based on our tactile perception. Incorporating such skill in robots will enable multiple applications, such as increasing flexibility in industrial processes or providing assistance to people with physical disabilities. However, the difficulty lies in adapting the grasping strategies to a large variety of tasks and objects, which can often be unknown. The brute-force solution is to learn new grasps by trial and error, which is inefficient and ineffective. In contrast, Bayesian optimization applies active learning by adding information to the approximation of an optimal grasp. This paper proposes the use of Bayesian optimization techniques to safely perform robotic grasping. We analyze different grasp metrics to provide realistic grasp optimization in a real system including tactile sensors. An experimental evaluation in the robotic system shows the usefulness of the method for performing unknown object grasping even in the presence of noise and uncertainty inherent to a real-world environment.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Evaluation of grasp quality measures in real grasps

  • Zakariapour, Pouria
  • Palomo Avellaneda, Leopold
  • Suárez Feijóo, Raúl
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents the implementation of grasp quality measures in a real-world robotic setup. Specifically, the largest wrench that a grasp can resist due to perturbations in any direction has been computed considering both the actual contact points and the magnitude of the actual grasping forces. The experiments were done using the Allegro Hand with OptoForce tactile sensors and a Fastrak motion tracking system. In this work, the grasp quality measure was experimentally computed using different objects without needing their detailed geometric models, and numerical results are provided., This work was partially supported by the Project PID2020-114819GB-I00 funded by MICIU/AEI/10.13039/501100011033., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Automatic generation of behavior trees for the execution of robotic manipulation tasks

  • Verma, Parikshit
  • Diab, Mohammed
  • Rosell Gratacòs, Jan
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Robots should be able to exercise reasoning in both symbolic and geometric levels in order to plan a manipulation task. The execution of such tasks needs to be robust enough to cope with real environments. In an attempt to address this pertinent industry need, the paper proposes the use of behavior trees for effective robotic manipulation in dynamic environments. This paper presents a method to automatically generate a behavior tree and showcases its ability to enable the robot to reason at different levels and adapt to an uncertain and changing environment. This allows for a complex task to be robustly executed, pioneering the advancement towards fully functional service robots., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Introducing modeling, analysis, and control of three-phase electrical systems using geometric algebra

  • Velasco García, Manel
  • Zaplana Agut, Isiah
  • Dòria Cerezo, Arnau
  • Duarte Mejía, Josué Neftali
  • Martí Colom, Pau
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This article introduces a novel framework based on geometric algebra (GA) for the modeling, analysis, and control of three-phase electrical systems, with a focus on unbalanced scenarios. The proposed approach utilizes GA to represent these systems using simplified single-input/single-output (SISO) models, significantly reducing their mathematical complexity while maintaining accuracy. The framework introduces GA-valued transfer functions (GA-TFs), enabling the extension of well-established multivariable (MIMO) techniques, such as Youla-Kucera parameterization, into the GA domain as an illustrative example. This demonstrates the adaptability of classical tools within the new algebra. The validity and potential of the approach are showcased through numerical examples of balanced and unbalanced systems, as well as physical implementations in a laboratory setup. The results confirm that GA provides a robust and scalable foundation for simplifying the analysis and control of three-phase systems, paving the way for future theoretical and practical advancements., Received 13 June 2024; revised 16 September 2024, 9 December 2024, and 31 January 2025; accepted 8 March 2025. Date of publication 2 May 2025; date of current version 2 October 2025. The work of Manel Velasco, Josue Duarte, and Pau Mart ı was supported in part by Spanish National Project PID2021-122835OB-C21 under Grant MICIU/AEI/10.13039/501100011033; Isiah Zaplana was supported in part by Spanish National Project PID2020-114819GB-I00 under Grant MICIU/AEI/10.13039/501100011033; Arnau Doria-Cerezo was supported in part by Spanish National Project PID2021-122821NB-I00 under Grant MICIU/AEI/10.13039/501100011033 and ERDF/EU, and in part by the Generalitat de Catalunya through the Project 2021 SGR 00376. (Corresponding author: Manel Velasco.), Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

User-tailored fuzzy-based grasp strength regulation in myocontrolled robotic hands

  • Sheikhsamad, Mohammad
  • Meattini, Roberto
  • Chiaravalli, Davide
  • Suárez Feijóo, Raúl
  • Rosell Gratacòs, Jan
  • Palli, Gianluca
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Myocontrolled robotic hands require accurate and responsive control to regulate grasp strength effectively. However, many human-in-the-loop (HITL) control systems still lack robust closed-loop solutions for fine grip force regulation, limiting their performance. This paper presents a novel control system for myocontrolled hands that combines contact force sensing and vibrotactile feedback to enable more natural and precise grasp interaction. The system features an advanced force controller based on fuzzy logic, with parameter optimization guided by user preferences collected through a graphical user interface (GUI) using Global Learning of Input–Output Strategies from Pairwise Preferences (GLISp). It is compared against heuristic model and neural network based controllers. The system was validated through real-world experiments using the AR10 robotic hand with OptoForce fingertip sensors, demonstrating improved adaptability and fine force regulation capabilities for the user., This work was partially supported by: • Project PID2020-114819GB-I00, funded by MICIU/AEI/10.13039/501100011033. • European Commission’s Horizon Europe Programme: IntelliMan (Grant 101070136); MUR project “Sustainable Mobility Center” (Grant CN00000023-CUP J33C22001120001); and the MICS Extended Partnership funded by the EU Next-GenerationEU (PNRR – Mission 4, Component 2, Investment 1.3 – D.D. 1551.11-10-2022, PE00000004)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Graphical visualization of contact forces and hand movements during in-hand manipulation

  • Suárez Feijóo, Raúl
  • Montaño Sarria, Andrés
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The paper presents a tool to graphically display the contact forces applied by the fingers of a robotic hand when doing grasping and in-hand manipulation. The forces are computed in two ways, on one side, directly using the measurements of tactile forces in the fingertips and, on the other, using the torques applied by the motors in the finger joints. The implemented tool also allows to command and move the real robotic hand by specifying the complete hand configuration or any single joint, and see graphically the hand simulation. Real results are shown using the Allegro hand with tactile sensors WTS-FT., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Development of neural networks to study flow behavior of medium carbon microalloyed steel during hot forming

  • Al Omar Mesnaoui, Anas
  • Català Calderon, Pau
  • Alcelay Larrión, José Ignacio
  • Peña Pitarch, Esteve
In the present article, the application of an artificial neural network (ANN) model whose function is the development of plastic instability maps of a medium carbon microalloyed steel during the hot forming process is studied. Secondly, we proceed to create another ANN capable of providing the recrystallized grain size in the steady state resulting from forming deformation. We start from the experimental data of a medium carbon microalloyed steel obtained by hot compression tests with strain rates that vary between 10-4 s-1 and 3 s-1 and in a range of temperatures between 900 °C and 1150 °C. These experimental data are used to train the proposed ANN and obtain flow curves. Finally, the processing maps are developed by applying the dynamic materials model (DMM), according to which the safe hot forming domains and the plastic instability domains of the studied material are delineated. The comparison between the ANN and the experimental maps is carried out. It is ascertained that the optimal regions of forging in the ANN maps coincide with those obtained in the experimental maps. In addition, a study of the influence of the microstructure on the behavior of the studied steel during hot forming is carried out., This research was funded by CICYT (Spain), through the research competitive project under grant number PID2020-114819GB-I00., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Analytical approach to reorient unknown objects via in-hand manipulation

  • Shirzadi Maryan, Morad
  • Zaplana Agut, Isiah
  • Suárez Feijóo, Raúl
This paper introduces a novel strategy to enhance the dexterous in-hand manipulation capabilities of robotic hands, focusing on reorienting unknown objects around any specified axis. The proposed method leverages tactile sensing and sensor-to-motor mapping to achieve precise and adaptive manipulation without prior object knowledge. The strategy employs circular finger movements to maintain stable and secure grasps, ensuring even pressure distribution. Preliminary experiments conducted with the Allegro robotic hand validate the efficacy of the approach across various orientations, demonstrating its potential for practical applications., This work was partially supported by the Project PID2020-114819GB-I00 funded by MICIU/AEI/10.13039/501100011033, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Symbolic and user-friendly geometric algebra routines (SUGAR) for computations in Matlab

  • Velasco García, Manel
  • Zaplana Agut, Isiah
  • Dòria Cerezo, Arnau
  • Martí Colom, Pau
Geometric Algebra (GA) provides a unified, compact mathematical framework for geometric computing, simplifying relations typically handled with more complex tools like matrix multiplication. In fields like robotics, GA replaces conventional coordinate-based approaches with the multiplication of special elements called rotors, offering greater efficiency. Despite its advantages, GA’s complexity and the lack of symbolic tools hinder its broader adoption among applied mathematicians and engineers. To address this, this article introduces Symbolic and User-friendly Geometric Algebra Routines (SUGAR), an open source Matlab toolbox. SUGAR streamlines GA usage in Matlab through a collection of user-friendly functions that support both numeric and symbolic computations, even in high-dimensional algebras. Designed for applied mathematics and engineering, it enables intuitive manipulation of geometric elements and transformations in two- and three-dimensional projective and conformal GAs, consistent with established computational methods. Moreover, SUGAR manages multivector functions such as exponential, logarithmic, sinusoidal, and cosine operations, enhancing its applicability in domains like robotics, control systems, and power electronics. Finally, this article also presents three validation examples across these fields, showcasing SUGAR’s practical utility in solving real-world engineering and applied mathematics problems., The work of I. Zaplana was partially supported by the Spanish National Project PID2020-114819GB-I00 funded by MI- CIU/AEI/10.13039/501100011033 and by the Generalitat de Catalunya through the Project 2021 SGR 00375. The work of A. Dòria-Cerezo was partially supported by the Spanish National Project PID2021-122821NB-I00 funded by MI- CIU/AEI/10.13039/501100011033 and ERDF/EU and by the Generalitat de Catalunya through the Project 2021 SGR 00376. M. Velasco, J. Duarte, and P. Martí were partially supported by the Spanish National Project PID2021-122835OB-C21 funded by MICIU/AEI/10.13039/501100011033., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

FailRecOnt - An ontology-based framework for failure interpretation and recovery in planning and execution

  • Diab, Mohammed
  • Pomarlan, Mihai
  • Borgo, Stefano
  • Bebler, Daniel
  • Rosell Gratacòs, Jan
  • Bateman, John
  • Beetz, Michael
Autonomous mobile robot manipulators have the potential to act as robot helpers at home to improve quality of life for various user populations, such as elderly or handicapped people, or to act as robot co-workers on factory floors, helping in assembly applications where collaborating with other operators may be required. However, robotic systems do not show robust performance when placed in environments that are not tightly controlled. An important cause of this is that failure handling often consists of scripted responses to foreseen complications, which leaves the robot vulnerable to new situations and ill-equipped to reason about failure and recovery strategies. Instead of libraries of hard-coded reactions that are expensive to develop and maintain, more sophisticated reasoning mechanisms are needed to handle failure. This requires an ontological characterization of what failure is, what concepts are useful to formulate causal explanations of failure, and integration with knowledge of available resources including the capabilities of the robot as well as those of other potential cooperative agents in the environment, e.g. a human user. We propose the FailRecOnt framework as a step in this direction. We have integrated an ontology for failure interpretation and recovery with a contingency-based task and motion planning framework such that a robot can deal with uncertainty, recover from failures, and deal with human-robot interactions. A motivating example has been introduced to justify this proposal. The proposal has been tested with a challenging scenario, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Wrist model for the whole human hand

  • Peña Pitarch, Esteve
A hand with 25 degrees of freedom (DOF) was proposed with forward and inverse kinematics for all fingers, with a realistic virtual simulation. However, the wrist is not in the model. Today, several authors have proposed in the literature that the wrist has a relative movement between the two rows of bones with eight bones. Some authors discuss a comparison of four joint coordinate systems previously described in the literature. Others propose a helical movement of wrist bones in distal movements. Objective: A new design the hand model of 25 DOF adding a movement of two rows and eight bones of the wrist. Methods: Once we locate a new coordinates system in the end of the radius close to the scaphoid, we apply Denavit-Hartenberg for all joints. Forward and inverse kinematics are applied. We include ten ligaments to apply restrictions in the wrist movement, which affects fingertip position. Results: A new model of a virtual human hand with more accuracy is presented and validated with a Cyberglove™ and Leap Motion. Conclusions: This new model that includes wrist movement yields a more accurate virtual human hand. New DOFs are added to the 25-DOF hand model., This work was partially supported for Spanish government by the project PID2020-114819GB-I00., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Improved dynamic resource reservation-based AGV traffic control with optimized task allocation

  • Verma, Parikshit
  • Olm Miras, Josep Maria
  • Suárez Feijóo, Raúl
  • Toldrà Fernández, Pol
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Traffic management of multi-AGV fleets through improved dynamic resource reservation (IDRR) has been recently proven to be an interesting alternative within zone control-based approaches in terms of time completion efficiency in in-house transportation tasks. In this paper, preliminary results show that the combination of IDRR with PRIM allocation, a classical market-based task allocation strategy, yields a significant reduction of finishing times in a standard benchmark problem. Hence, further improvements are to be expected from deeper suitability analyses plus better tailored adaptations of optimal task allocation algorithms to zone control-based fleet management systems, and in particular to IDRR., P. Verma was supported by the Generalitat de Catalunya Project 2021 DI 16. J.M. Olm was partially supported by the Government of Spain Project PID2021-122821NB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU, and by the Generalitat de Catalunya Projects 2021 SGR 00376 and 2021 DI 16. R. Suarez was partially supported by the ´ Government of Spain Project PID2020-114819GB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU, and by the Generalitat de Catalunya Project 2021 DI 16., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Editorial: current challenges and future developments in robot grasping

Recercat. Dipósit de la Recerca de Catalunya
Publication

La tecnología 5G como catalizadora de una nueva revolución industrial

  • Vinagre, Manuel
  • Calvo, V. J.
  • Suárez Feijóo, Raúl
  • Serra, C.
  • Munduate, G.
Artículo sobre la aplicación de la tecnología 5G en el ámbito industrial., La sigla 5G representa la última generación de tecnología móvil caracterizada por ofrecer un ancho de banda y velocidades de transferencia sin precedentes respecto a las tecnologías predecesoras. En estos últimos años, entidades gubernamentales y grandes compañías han dejado patente su interés en el dominio del 5G, realizando múltiples esfuerzos en diferentes actuaciones y demostrando que se trata de una tecnología estratégica en la transformación digital de nuestra sociedad. El uso de la tecnología 5G habilita un nuevo porfolio de servicios revolucionarios en sectores de gran relevancia como la salud, industria o el transporte. La capacidad del 5G de gestionar millones de dispositivos en tiempo real abre un abanico de posibilidades inalcanzables hasta la fecha. Se pueden crear redes para la teleoperación de forma segura y en tiempo real de dispositivos como robots de cirugía, o bien redes para la gestión inteligente de sistemas de control distribuidos aplicables en modelos de fabricación flexible, o redes para la gestión activa del transporte y el tráfico mediante vehículos conectados, entre otras. La implantación de este salto tecnológico no está exenta de adversidades en términos económicos y de sostenibilidad dada la dimensión del cambio a nivel de infraestructura mundial. Por un lado, se requiere un plan de despliegue gradual para la transición desde el sistema actual 4G, cuyo alcance va muy por detrás de la rápida evolución tecnológica en el sector de las telecomunicaciones. Por otro lado, al ser un prometedor habilitador de la innovación digital y gran conectividad, aunque 5G es energéticamente más eficiente que el 4G, se estima un gran aumento de la contaminación derivada de la producción masiva de dispositivos asociados a los nuevos servicios digitales implantados gracias al 5G. Este artículo pretende introducir al lector a la tecnología 5G, describiendo el proceso de estandarización durante estos últimos años para afrontar los impedimentos de su implantación a medio plazo. A su vez, se describe su capacidad y fundamentos que permiten entender su potencial sobre todo enfocado al sector industrial. También se muestra las tendencias y desafíos vigentes del 5G en el despliegue de entornos industriales, concluyendo como una de las tecnologías con mayor impacto de los últimos tiempos, que abre el camino a una nueva era digital en la industria y en la sociedad en general., Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Resolución geométrica de la cinemática inversa de un robot sin muñeca esférica

  • Palomo Avellaneda, Leopold
  • Rosell Gratacòs, Jan
  • Suárez Feijóo, Raúl
  • Zaplana Agut, Isiah
Una de las aplicaciones más conocidas del álgebra geométrica en la ingenierìa consiste en proporcionar una formulación compacta de la cinemática de los robots manipuladores serie. Sin embargo, el uso de álgebra geométrica en el campo de la robótica está aún en sus inicios, y todavía hay varios problemas abiertos que pueden ser tratados con esta elegante y compacta formulación. En esta línea, el presente artículo introduce una estrategia basada en el álgebra geométrica conforme para resolver el problema de la cinemática inversa para un robot manipulador de 6 grados de libertad (GdL) sin muñeca esférica, para el cual es conocido que el problema de la cinemática inversa no tiene, en general, solución analítica. Para ello, la estrategia propuesta en este artículo se basará en la explotación de las propiedades algebraicas y geométricas del álgebra geométrica conforme como, por ejemplo, que toda isometría se puede representar de manera compacta como un rotor, y que los objetos geométricos no son más que multivectores., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Software package for efficient use of a robotic anthropomorphic hand

  • Pujol Closa, Marina
  • Palomo Avellaneda, Leopold
  • Suárez Feijóo, Raúl
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The aim of this work is the development of a complete software package to exploit a robotic anthropomorphic hand, such as the Allegro Robotic Hand, allowing to easily perform accurate grasps. It includes the Inverse and the Forward Kinematics and allows storing different configurations as well as to perform and store predefined grasps while controlling the movement speed. The software presented in this document allows the easy use of the Allegro Robotic Hand, enhancing its capabilities and allowing further research on grasp theory by facilitating the experimental implementation. The software is designed to work with all the Allegro Hand versions despite their differences. It is an improved alternative to the manufacturer's version, offering a powerful framework for grasping. Besides, it has been designed to easily adapt to other robotic anthropomorphic hands., This work was partially supported by the Project PID2020-114819GB-I00 funded by MICIU/AEI/10.13039/501100011033., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Efficient Industrial Solution for Robotic Task Sequencing Problem With Mutual Collision Avoidance & Cycle Time Optimization

  • Touzani, Hicham
  • Seguy, Nicolas
  • Suárez Feijóo, Raúl
  • Hadj Abdelkader, Hicham
  • Rosell Gratacòs, Jan
  • Palomo Avellaneda, Leopold
  • Bouchafa, Samia
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, In the automotive industry, several robots are required to simultaneously carry out welding sequences on the same vehicle. Coordinating and assigning welding points between robots is a manual and difficult phase that needs to be optimized using automatic tools. The cycle time of the cell strongly depends on different robotic factors such as the task allocation among the robots, the configuration solutions and obstacle avoidance. Moreover, a key aspect, often neglected in the state of the art, is to define a strategy to solve the robotic task sequencing with an effective robot-robot collision avoidance integration. In this paper, we present an efficient iterative algorithm that generates a high-quality solution for Multi-Robotic Task Sequencing Problem. This latter manages not only the mentioned robotic factors but also aspects related to accessibility constraints and mutual collision avoidance. In addition, a home-developed planner ( RoboTSPlanner ) handling 6 axis has been validated in a real case scenario. In order to ensure the completeness of the proposed methodology, we perform an optimization in the task, configuration and coordination space in a synergistic way. Comparing to the existing approaches, both simulation and real experiments reveal positive results in terms of cycle time and show the ability of this method to be interfaced with both industrial simulation software and ROS-I tools., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Efficient and robust trajectory generation for robotic manipulators

  • Ruiz Celada, Oriol
  • Palomo Avellaneda, Leopold
  • Suárez Feijóo, Raúl
  • Rosell Gratacòs, Jan
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper describes a procedure to generate valid robot trajectories for a given sequence of points defining a geometric path, which is a quite frequent output of many robot motion planners. The proposed approach takes into account physical constraints of the robot, as the maximum velocity and the maximum acceleration that each joint can reach, and has been implemented in C++ as a general tool that can be used with different robots., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Automating adaptive execution behaviors for robot manipulation

  • Ruiz Celada, Oriol
  • Verma, Parikshit
  • Rosell Gratacòs, Jan
  • Diab, Mohammed
Robotic manipulation in semi-structured and changing environments requires systems with: a) perception and reasoning capabilities able to capture and understand the state of the environment; b) planning and replanning capabilities at both symbolic and geometric levels; c) automatic and robust execution capabilities. To cope with these issues, this paper presents a framework with the following features. First, it uses perception and ontology-based reasoning procedures to obtain the Planning Description Domain Language files that describe the manipulation problem at task level. This is used in the planning stage as well as during task execution in order to adapt to new situations, if required. Second, the proposed framework is able to plan at both task and motion levels, intertwining them by incorporating geometric reasoning modules to determine some of the symbolic predicates needed to describe the states. Finally, the framework automatically generates the behavior trees required to execute the task. The proposal takes advantage of the ability of behavior trees to be edited during run time, allowing adaptation of the action plan or of the trajectories according to changes in the state of the environment. The approach allows for robot manipulation tasks to be automatically planned and robustly executed, contributing to achieve fully functional service robots., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Human to robot hand motion mapping methods: review and classification

  • Meattini, Roberto
  • Suárez Feijóo, Raúl
  • Palli, Gianluca
  • Melchiorri, Claudio
In this article, the variety of approaches proposed in literature to address the problem of mapping human to robot hand motions are summarized and discussed. We particularly attempt to organize under macro-categories the great quantity of presented methods, that are often difficult to be seen from a general point of view due to different fields of application, specific use of algorithms, terminology and declared goals of the mappings. Firstly, a brief historical overview is reported, in order to provide a look on the emergence of the human to robot hand mapping problem as a both conceptual and analytical challenge that is still open nowadays. Thereafter, the survey mainly focuses on a classification of modern mapping methods under six categories: direct joint, direct Cartesian, taskoriented, dimensionality reduction based, pose recognition based and hybrid mappings. For each of these categories, the general view that associates the related reported studies is provided, and representative references are highlighted. Finally, a concluding discussion along with the authors’ point of view regarding future desirable trends are reported., This work was supported in part by the European Commission’s Horizon 2020 Framework Programme with the project REMODEL under Grant 870133 and in part by the Spanish Government under Grant PID2020-114819GB-I00., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Task space vector field guiding for motion planning

  • Urra González, Fernando
  • Rosell Gratacòs, Jan
  • Suárez Feijóo, Raúl
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The article deals with the problem of planning in the task space in the presence of vector fields, while verifying and validating the constraints in the configuration space. The proposed approach, called the Task Space Vector Field Rapidly-exploring Random Tree (TSVF-RRT) algorithm, extends the Task-Space Rapidly-exploring Random Trees (TS-RRT) algorithm by incorporating vector fields into the task space, while avoiding non-trivial constraints on the configuration space. The planner restricts the search to a lower dimensional space, minimizing the upstream functional. To evaluate the proposed approach, graphical simulations are presented, carried out using a planar manipulator of 10 DOF. Possible advantages that encourage further research in this line are discussed., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication

Closed-form inverse kinematics solutions for a class of serial robots without spherical wrist using conformal geometric algebra

  • Marzabal Gatell, Arnau
  • Zaplana Agut, Isiah
One of the most well-known applications of geometric algebra in engineering is providing a compact formulation of the kinematics of serial robotic manipulators. However, the use of geometric algebra in the field of robotics is still in its early stages, and there are still several open problems that can be addressed with this elegant and compact formulation. In this context, this work introduces a strategy based on conformal geometric algebra to solve the inverse kinematics problem for a class of 6DOF serial robots without a spherical wrist, for which it is known that the inverse kinematics problem generally does not have an analytical solution. To achieve this, a purely geometric strategy extending already existing contributions for the case where the robot has a spherical wrist is proposed. In particular, a point is assigned to each joint of the robot so that the problem reduces to computing the set of all possible joint positions for a given desired position and orientation of its end-effector. These points are found by defining and manipulating several geometric entities such as lines, planes, and spheres. Finally, validation with a real robot of the considered class is demonstrated both in simulation and experimentation., This work was partially supported by the European Commission’s Horizon Europe Framework Programme with the project Smarthandle (Resilient manufacturing lines based on smart handling systems) under Grant Agreement 101091792, and the Spanish Government through the project CaRo (Capacidades Intr´ınsecas para Robots Co-trabajadores) under Grant Agreement PID2020-114819GB-I00., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Computación frontera: influencia de latencias en la precisión de robots

  • Urbaniak, Dominik
  • Rosell Gratacòs, Jan
  • Suárez Feijóo, Raúl
  • Suppa, Michael
La computación en la frontera (edge computing) permite acceder a grandes recursos computacionales y a redes de computadores, facilitando que pequeños dispositivos con recursos limitados realicen cálculos complejos descargándolos en computadores potentes de la red, y permite que la latencia en la comunicación se pueda reducir en comparación con la computación en la nube (cloud computing). Los robots móviles autónomos podrían beneficiarse enormemente de computación en la frontera, ya que en general su energía y recursos computacionales son limitados, pero su uso les permitiría realizar tareas computacionalmente complejas y que requieran adaptaciones rápidas a un entorno cambiante. En este trabajo se realiza una comparación del impacto de las tecnologías de comunicación más destacadas usando como tarea de ensayo, en simulación con Gazebo y ROS2, la corrección de la orientación de un cubo al ser empujado por un robot manipulador UR5e equipado con una pinza de dedos paralelos Robotiq 2F-85. Los resultados muestran un mejor rendimiento de 5G Ultra Reliable Low-Latency Communication (URLLC) sobre las comunicaciones 5G y 4G privadas, reduciendo la media del error de orientación en un 36% y 55 %, respectivamente, tras haber realizado 50 acciones de corrección de la orientación con cada tecnología., Peer Reviewed, Postprint (published version)