Skip to main content

DISPOSITIVO FOTOELECTROQUIMICO DE DOS ELECTRODOS PARA LA PRODUCCION DE HIDROGENO VERDE UTILIZANDO COMPONENTES NO CRITICOS Y DERIVADOS DE GRAFENO

PID2022-139671OB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2022
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Metal-free dyes with deep HOMO level for TiO2 sensitization

  • Ansón-Casaos, Alejandro
  • Orduna, Jesús
  • Martínez-Barón, Carlos
  • Blanco Cambronero, Aitana
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Blesa, María Jesús
Work presented at the XI Franco-Spanish Workshop IBERNAM-CMC2 – 9-10th November 2023, Zaragoza (Spain)., Photoelectrochemical (PEC) water splitting is being intensively studied as a method for green hydrogen production and artificial photosynthesis. Specifically, titanium dioxide (TiO2) nanoparticles show remarkable properties as a photocatalyst and for the preparation of nanostructured photoanodes. However, as a wide bandgap semiconductor, TiO2 is only active under UV irradiation, and sensitization with organic dyes would be a convenient strategy to improve its solar conversion efficiency. In our previous work, we studied the sensitization of the TiO2 electrode through the adsorption of a metal-free donor-π-acceptor (D-π-A) dye molecule (AT-Pyri) [1]. The AT-Pyri molecule consists of an aniline donor, thiophene π-spacer, and a pyrimidine unit as the acceptor part. We showed that the AT-Pyri/TiO2 electrode was in fact active for water splitting under a wide range of visible light wavelengths, up to 600 nm. However, the system visibly degraded during transient photocurrent measurements under potentiostatic conditions in the Na2SO4 aqueous electrolyte. As a possible source of instability, we considered the oxidation potential (Eox) of AT-Pyri, which was determined to be +0.88 V vs. SHE, thus above the O2/H2O reduction potential. In this work, we evaluate the energy levels of two alternative dye molecules by means of DFT theoretical calculations. In terms of the chemical structure, we follow a simplification strategy, resulting in π-A type molecules. We select the bithiophene ring as the π-spacer, and either cyanoacetic acid (-CNCOOH) or pyrimidine (Pyri) as the acceptor and anchoring group (Figure 1). Both dyes fulfil theoretical requirements to become TiO2 sensitizers in a water splitting process, with Eox > EO2/H2O (Table 1). Next, we perform the laboratory synthesis and characterization of both dyes, which show yellowish colors. Nanostructured TiO2 electrodes on FTO/glass substrates are prepared by screen printing, and dye adsorption is successfully accomplished by immersion of TiO2 electrodes in CH2Cl2 solutions. However, the TT-CNCOOH dye desorbs from the TiO2 support and is solubilized when the electrode is put in contact with electrolytic Na2SO4 and phosphate buffer solutions, so it is not used for PEC studies. The complete PEC characterization of the TT-Pyri/TiO2 electrode is performed in a 3-electrode cell with aqueous Na2SO4 electrolyte, and under simulated solar light irradiation. The electrode is stable under cyclic voltammetry conditions between -0.5 and 0.4 V vs. Ag/AgCl. Moreover, the electrode keeps its yellow color after a 5 min photocurrent measurement under light irradiation periods of 15 s and a constant potential of 0 V vs. Ag/AgCl. The photocurrent is multiplied by 1.6 and 12.5 In the presence of glycerol and triethanolamine as sacrificial agents, respectively. The dye sensitization effect was also proved by experiments using a monochromator. However, as it is observed after a continuous photocurrent measurement for 2 h, the long-time stability is still hindered by a slow unknown degradative mechanism, which requires further investigation, Financial support from Spanish MICINN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grants PID2019-104272RB-C51, PID2022-139671OB-I00 and PID2019-104307GB-I00, and the Gobierno de Aragón (DGA) under projects T03_23R and E47_23R (Grupos de Investigación Reconocidos) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Metal-free dyes on TiO2 for PEC water splitting

  • Ansón-Casaos, Alejandro
  • Martínez-Barón, Carlos
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Blesa, María Jesús
Work presented at III Workshop on Materials far Photocatalysis, Energy and Clean Environment (IIIWMPECE), ICMS -Sevilla, (Spain), February 20-21, 2025., Dye sensitization has been widely studied in electrochemical photovoltaic cells. More recently, a similar concept has been explored within the context of photoelectrochemical (PEC) water splitting, with a particular facus on TiO2 photoelectrodes. Despite the prevalence of organometallic complexes featuring expensive metals (Ru, Ir) in current dye and molecular catalyst research, efforts should be directed towards more abundant metals and purely organic photoactive compounds. One of the most efficient molecular structures in rr-conjugated building blocks organic to boost metal-free intramolecular dyes combines charge donar transfer (D), and acceptor electron (A), transport and to TiO2. In this communication, the water-splitting performance of TiO2 electrodes TiO2. sensitized with a series of such dye molecules (Table 1 ), including their possible combination with carbon nanomaterials, is summarized and analyzed. Electronic HOMO and HUMO levels, as well as reduction potentials of the dye molecules, reveal favorable thermodynamicreveal conditions, whereas their limited stability under water oxidation conditions seems to be related to purely kinetic effects. Tackling this challenge effects. remains crucial yetfar achieving future advances toward an artificial photosynthesis., Financial support from MCIN/AEl/10.13039/501100011033, MICIU/AEI/10.13039/501100011033 and "ERDF A Way of making Europe" under project grant PID2022-139671O8-I00 and CEX2023-001286-S, as well as from the Gobierno de Aragón (DGA, T03_23R and E47-23R) and Universidad de Zaragoza (UZ2023-CIE-01)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Sacrificial role of carbon nanostructures in hybrid titanium dioxide photoelectrodes

  • Ansón-Casaos, Alejandro
  • Pérez-Hernández, Marta
  • Lemos-Chapela, J.
  • Martínez-Barón, Carlos
  • Ciria, José Carlos
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Abstract of the oral communication presented at HeteroNanoCarb 2025, January 13-17, 2025, Benasque (Aragon), Spain., Many researchers have found positive effects upon inserting carbon nanostructures (CNTs, GO, CDs) in TiO2 for environmental photocatalysis, dye-sensitized photovoltaics, and photoelectrochemical (PEC) applications. Benefits of carbon nanostructures are generally linked to their outstanding properties of charge mobility and transfer. In our group, detailed electrochemical and PEC characterizations have been performed in the past on SWCNT/TiO2, GO/TiO2 and CD/TiO2 electrodes. However, the physicochemical mechanisms in C/TiO2 hybrids are complex and elusive to a generalized discussion. In this communication, the focus is set on electrode sintering, which is typically performed between 350-550 °C. When electrodes are treated under air atmosphere, carbon nanostructures can be logically altered. Still, certain improvements are found in the photocurrent density of water splitting (Figure 1). Therefore, the role of carbon nanostructures must be understood as a templating or surface conditioner, rather than a direct way for charge mobility., Financial support from Spanish MICIN/AE/10.13039/501100011033 and "ERDF a way of making Europe" under project grant PID2022-139671OB-I00, as well as by the Gobierno de Aragón (DGA) under project T03_23R (Grupo de Investigación Reconocido) is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Carbon nanostructures: Heading toward water-based functional materials and sustainable device components: Part II

  • Benito, Ana M.
  • Maser, Wolfgang K.
Abstract of the work presented at NATO Advanced Study Institute, Nanotechnological Advances in Environmental, Cyber and CBRN Security, 14th-22nd september 2024, Sozopol (Bulgaria)., Carbon nanostructures encompass a diverse family of two-, one- and zero dimensional objects, covering graphene, carbon nanotubes, fullerenes and graphene dots as important representatives. There unique structures, translates into unparalleled world-record functional characteristics. This in turn offers unique possibilities for the design of novel, high-performing device components, very much sought for solving challenges mankind actually is facing. The first lecture offers a fundamental introduction into carbon nanostructures underlining the unique structure-property relationship and the value of these materials for a broad range of applications. The second lecture concentrates on pathways toward sustainable device fabrication. The key of developing water-based processing possibilities of carbon nanostructures will be highlighted. At hand of examples from own research findings [1-8], processing, macroscopic assembly, device component fabrication and performance will be discussed. This specifically will outline the contribution of carbon nanostructures to the field of energy applications as cornerstone for tackling the challenge of clean and sustainable energy production, an issue of concern to global security., Research project PID2022-139671OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, by the “European Union”; Recognized Research Group T03_23R funded by Government of Aragon (DGA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Green emissive CDs from m-phenylenediamine. Evaluation of structure, fluorescence and response in TiO2 photoanodes for photoelectrochemical water splitting

  • Álvarez Sánchez, Miguel Ángel
  • Martínez-Barón, Carlos
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
  • Benito, Ana M.
1 figure.-- Abstract of the poster presented at the HeteroNanoCarb 2025 Conference, January 13-17, 2025, in Benasque (Aragon), Spain., Within the carbon nanostructures family, Carbon Dots (CDs) stand-out due to their excellent properties, such as water solubility, high photoluminescence (PL) with tunable emission and photochemical stability, among others. Additionally, they are considered as a potential alternative to conventional quantum dots, thus overcoming issues of toxicity [1]. From polymeric to carbonized CDs species, critical factors such as doping heteroatoms, synthesis conditions and starting precursors are determinant in terms of their final size, structure and PL mechanism and source [2]. The wide variety of CDs species with different structure and PL emissions versatility for application in many research fields, such as photocatalysis, photoelectrochemistry, photovoltaics [3] and biomedicine [4]. In this work, we evaluate the properties of green emissive bottom-up synthesized CDs at different temperatures by hydrothermal process [5]. We present results on the structural and optical properties and propose a consistent mechanism explaining their green PL characteristics. Moreover, we demonstrate that structure and photostability of CDs integrated into TiO2 photoanodes are of critical relevance to achieve enhanced photoelectrochemical water splitting performance towards hydrogen production., Research project PID2022-139671OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", by the European Union. Recognized Research Group T03_23R funded by Government of Aragon (DGA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene oxide @ enamino-xanthene charge transfer complexes for TiO2 photoelectrode sensitization

  • Martínez-Barón, Carlos
  • Garrido Zoido, Juan Manuel
  • Álvarez Sánchez, Miguel Ángel
  • Ansón-Casaos, Alejandro
  • Gil, María Victoria
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Work presented at the HeteroNanoCarb 2025 conference, 13-17 January 2025, in Benasque, (Aragon), Spain., Graphene oxide (GO) is a versatile nanomaterial with unique possibilities for the generation of novel hybrid materials of great interest in photoelectrochemical applications. In the present work, we report the combination of GO with enamino-xanthenes, which are a class of highly fluorescent dyes produced through a sustainable catalyst-free synthesis [1]. The optoelectronic properties of the resulting hybrid nanomaterial reveal the successful generation of GO @ enamino-xanthene charge transfer complexes. Subsequently, the GO @ enamino-xanthene hybrids were deposited as dye sensitizers onto for TiO2 film photoelectrodes. Tested in a photoelectrochemical cell under water splitting conditions [2], the GO @ enamino-xanthene sensitized TiO2 photoelectrodes display a 3.5-fold photocurrent increase compared to bare TiO2 photoelectrodes. We demonstrate that the enhancement is caused by two factors: increased light absorption capability and enhanced charge transfer of the photoelectrode [3]. These results pave the way towards sustainable GO-based sensitizing materials for enhancing the efficiency of photoelectrodes in photoelectrochemical applications., Research project PID2022-139671OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", by the European Union. Recognized Research Group T03_23R funded by Government of Aragon (DGA)., Peer reviewed