Skip to main content

MEJORA DE LA SOSTENIBILIDAD, SEGURIDAD Y RESILIENCIA DE LA CONEXION ENTRE VIGAS SEGMENTADAS PREFABRICADAS DE HORMIGON MEDIANTE EL USO DE NUEVOS MATERIALES.

RTI2018-099091-B-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Safety Assessment of Shear Strength Current Formulations for Composite Concrete Beams without Web Reinforcement

  • Rueda-García, Lisbel|||0000-0002-2061-1656
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Fernández Prada, Miguel Ángel|||0000-0001-5527-7793
[EN] Construction with precast concrete elements without web reinforcement and cast-in-place concrete on them to enhance the overall structure's integrity is a widespread practice in building construction. However as these composite elements' vertical shear strength has not been studied in-depth, a clear criterion about cast-in-place concrete's contribution to shear resistance is still a pending matter. The present study intends to reach practical conclusions about the shear strength assessment of composite concrete elements without web reinforcement. To do so, the shear strengths of 36 specimens, provided by existing shear formulations, were compared: 19 specimens tested by the authors, in which the existence of an interface between concretes, the cross-sectional shape and the concrete compressive strengths of the beam and slab were studied; and 17 specimens taken from a previous study about composite elements by Kim et al. (2016). The applied shear formulations were those of EC2-04, Draft 7 of EC2-20, fib MC-10, ACI 318-19 and the model proposed by Kim et al. (2016). Firstly, specimens' shear strength was calculated by considering that only the beam resisted shear. Secondly according to ACI 318-19 indications about assessing composite elements¿ shear strength, the entire composite element's effective depth was used considering the lower of the compressive strengths of the beam's and slab's concretes and the weighted average of the compressive strengths. Additionally,the entire effective depth and the beam's concrete compressive strength were used. Codes formulations were more precise when estimating the monolithic specimens' shear strengths than those of composites. Therefore, the development of an adapted methodology to assess these elements¿ shear strengths is needed. EC2-20 obtained the most accurate results and gave quite good estimations for composite elements when the entire effective depth and weighted average of the concretes compressive strengths were considered., This study forms part of the research conducted at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politècnica de València (UPV, Spain) with concrete supplied by Caplansa. The project has been supported by the Spanish Ministry of Science and Innovation through Projects BIA2015-64672-C4-4-R and RTI2018-099091-B-C21-AR; the Regional Government of Valencia through Project AICO/2018/250, and the European Union with FEDER funds. The authors thank the Spanish Ministry of Economy and Business for Grant BES-2016-078010.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Experimental Study of Dry Joints with Castellated Keys Subjected to Combined Axial, Bending and Shear Forces

  • Traver-Abella, Celia
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Albiol Ibáñez, José Ramón|||0000-0003-3049-9693
[EN] The design and execution of the connection between precast concrete segmental elements are critically important since these connections are a discontinuity region whose structural capacity is fundamental for transmitting normal and shear stresses through the joint. The use of dry joints with castellated keys is the most widespread solution used in the construction of fast precast elements. The experimental dry joint programs performed to date have focused on the behavior under direct shear at different confining stress levels applied uniformly along the joint. Axial compression forces simulate the confinement effect between two different joint parts. Design formulations have generally been determined to evaluate the shear capacity of dry joints subjected to uniform confinement. Although the connections in concrete segmental elements are usually subjected to combined axial, bending and shear forces. This communication presents the results of an initial 6-test experimental program performed on conventional concrete dry joint specimens with three shear keys subjected to different eccentric forces and confining stress levels. For this, a test was designed for push-off dry joint specimens subjected to these combined forces, in which it was possible to apply an axial compression force with different eccentric forces to subject the joint to a compression force applied at the central point (uniform confinement throughout the joint) or eccentric compression force, to vary the compression depth (no uniform confinement) and tension zones. This test enabled the analysis of the effect of eccentric compression forces on the joint¿s shear capacity and verified the safety of the existing formulations. The AASHTO (2003) formula was also analyzed to evaluate shear capacity for dry joints subjected to these combined forces., This study forms part of research conducted at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politècnica de València (UPV, Spain). The project was supported by the Spanish Ministry of Science and Innovation through Project RTI2018-099091-B-C21-AR and the European Union with FEDER funds. The authors are grateful to the Spanish Ministry of Science and Innovation for Grant FPU18/03310.