Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publication Libro o Monografía (Book)

Estimating energy consumption in households for non-intrusive elderly monitoring

  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Diego Otón, Laura De|||0000-0002-4939-2987
  • Pizarro Pérez, Daniel|||0000-0003-0622-4884
  • Pérez Rubio, María Del Carmen|||0000-0001-8271-6843
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
2023 IEEE International Workshop on Metrology for Living Environment (MetroLivEnv), 29-31 May 2023, Milano, Italy., Population ageing is becoming a key social issue in recent decades, particularly in Western countries, where this fact, together with the increase of life expectancy, has posed a significant strain on public finances and health services. In this context, many technological developments are often proposed to promote and support the independent living of elderly at their own homes, thus avoiding or postponing possible entries into social residences. Among them, smart meters provide a nonintrusive way to monitor and estimate the tenants" daily activities, by only using a single-point measurement in the mains at the entrance of the household. This work describes a regression approach to estimate the energy consumption of a house by means of a LSTM neural network. For that purpose, a pilot has been run on a house during six months in order to collect the electrical data, which will be used later to train the neural network. After that training, the network tries to estimate the energy consumption every 15 minutes, so any deviation between the predicted sample and the measured one might be used to detect anomalies in the daily routine of the tenant., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Libro o Monografía (Book)

Comparative analysis of neural network implementations for NILM applications

  • Martín Catalán, Jorge
  • Diego Otón, Laura De|||0000-0002-4939-2987
  • Tapiador Luque, Miguel
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
2023 38th Conference on Design of Circuits and Integrated Systems (DCIS), 15-17 November 2023, Málaga, Spain., Non-Intrusive Load Monitoring (NILM) comprises a set of techniques that try to disaggregate the energy consumption in a household or building, based on the measurements coming from a single-point smart meter. In this process, a key step is the load identification of the different appliances that may switched on/off during a certain interval under analysis. For that purpose, machine-learning techniques, including deep neural networks, have recently been involved. These classification algorithms may often imply a high computational cost, that might compromise a possible edge-computing implementation on the local smart meters. In this context, this work presents a preliminary comparison between two different real-time implementations of both neural networks, a dense one and a convolutional one, applied to load classification. The implementations are based on a FPGA approach and on a processor. In general terms, preliminary results show that the FPGA solution provides lower latencies than the processor one, at the expense of requiring a higher design effort and a quantization error coming from the fixed-point representation., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Libro o Monografía (Book)

Centralized optical 3D positioning system for emitting tags

  • Aparicio Esteve, Elena|||0000-0001-7886-312X
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Moltó Orozco, David|||0000-0002-2790-3758
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Cubero Vacas, Miguel
13th International Conference on Indoor Positioning and Indoor Navigation (IPIN2023), 25-28 September 2023, Nuremberg, Germany., The demand for accurate and reliable local positioning systems has grown rapidly with the increasing use of Location-Based Services (LBS). Emerging technologies such as optical, RF, acoustic, mechanical, and magnetic are feasible options for indoor positioning. Optical-based systems have gained attention due to the widespread LED lamp availability and centimeter-level accuracy. In this context, this work presents the implementation and validation of a centralized optical Local Positioning System (LPS) based on a set of mobile emitter LEDs and a minimum of two fixed receivers, enabling simultaneous position of all tags in the infrastructure (centralized approach). The system is designed for long-distance measurements, using Visible or Infrared Light signals. By incorporating geometric considerations into a Non-Linear Least Squares Estimator (NLSE), the system can estimate the 3D position of a mobile object (i.e. person, drone). The comparison of different deployments demonstrates that the proposed system estimates the 3D position with less than 4mm of error in 90% of cases when using four non-aligned receivers and a single LED., Agencia Estatal de Investigación, Universidad de Alcalá, Junta de Comunidades de Castilla-La Mancha, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Libro o Monografía (Book)

Implementing a CNN in FPGA programmable logic for NILM application

  • Tapiador Luque, Miguel
  • Diego Otón, Laura De|||0000-0002-4939-2987
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
2023 38th Conference on Design of Circuits and Integrated Systems (DCIS), 15-17 November 2023, Málaga, Spain., Non-Intrusive Load Monitoring (NILM) techniques are gaining popularity in the field of energy savings. Generally implemented through the use of smart meters, the main challenge with these devices is that they operate at very low sampling rates. To address this issue, FPGA-based systems have been proposed to capture instantaneous currents and voltages at higher sampling frequencies in the kHz range. However, the limitation of these architectures lies in the fact that the acquired windows are often transmitted upstream to the cloud for the application of load classification algorithms based on machine learning, relying on high-bandwidth communications available onsite. This work proposes an alternative approach by implementing the classification algorithms in the same acquisition and processing system, by using custom convolutional neural networks on mid-range FPGA devices. Brevitas and FINN frameworks are used for the quantization-aware training, as well as for the generation of a peripheral that may be integrated into any FPGA-based SoC (System-on-Chip) architecture. The proposed approach allows the whole processing involved in NILM techniques to be integrated into a single embedded system. Preliminary experimental results demonstrate the effectiveness of the proposed approach., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Libro o Monografía (Book)

High-rate acquisition system for an infrared LPS

  • Cubero Vacas, Miguel
  • Moltó Orozco, David|||0000-0002-2790-3758
  • Aparicio Esteve, Elena|||0000-0001-7886-312X
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
2023 38th Conference on Design of Circuits and Integrated Systems (DCIS), 15-17 November 2023, Málaga, Spain., In the last years, the demand for positioning systems based on visible light, infrared light or, in general, optical signals has increased considerably due to their high accuracy and low cost compared to positioning systems based on other technologies, as well as their ease of integration due to their wide presence in domestic and industrial environments. The main constraint of these solutions is that the high speed of light makes the acquisition process complex. This work proposes a complete acquisition architecture for the twelve signals coming from four QADA (Quadrature Angular Diversity Aperture) photoreceptors, based on an analog front-end for signal conditioning at the input, an analog-to-digital converter, and a final digital stage using an FPGA for the acquisition of the data coming from the converter with high data rates up to 16.25 Msps. To verify the system performance, LS (Loosely Synchronized) sequences, often used in positioning systems, are emitted by a LED, and, later, they are acquired and digitally processed successfully by the proposed architecture in some preliminary experimental tests., Agencia Estatal de Investigación, Universidad de Alcalá, Junta de Comunidades de Castilla-La Mancha, European Science Foundation