Skip to main content

CICLO DE AEROSOLES EN MARTE Y LA TIERRA, ESTUDIO COMPARATIVO. IMPLICACIONES PARA LA VIDA Y PROTECCION PLANETARIA-ATMOSFERAS (CAMELIA-ATM)

PID2019-104205GB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre INSTITUTO NACIONAL DE TECNICA AEROESPACIAL ESTEBAN TERRADAS (INTA)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Ammonium affects the wet chemical network of HCN: feedback between prebiotic chemistry and materials science

  • de la fuente, Jose Luis
  • Mateo Marti, Eva
  • Ruiz-Bermejo, Marta
  • Vega, Jorge
  • Valles González, M. P.
  • Pérez Fernández, Cristina
Prebiotic chemistry one-pot reactions, such as HCN-derived polymerizations, have been used as stimulating starting points for the generation of new multifunctional materials due to the simplicity of the processes, use of water as solvent, and moderate thermal conditions. Slight experimental variations in this special kind of polymerization tune the final properties of the products. Thus, herein, the influence of NH4Cl on the polymerization kinetics of cyanide under hydrothermal conditions and on the macrostructures and properties of this complex system is explored. The kinetics of the process is consistent with an autocatalytic model, but important variations in the polymerization reaction are observed according to a simple empirical model based on a Hill equation. The differences in the kinetic behaviour against NH4Cl were also revealed when the structural, morphological, thermal, electronic and magnetic properties of the synthesized cyanide polymers were compared, and these properties were evaluated by elemental analysis, FTIR, XPS, UV-vis, and ESR spectroscopies, X-ray diffraction, SEM and thermoanalytical techniques. As a result, this hydrothermal prebiotic polymerization is not only pH dependent, as previously thought, but also ammonium subservient. From this result, a hypothetical reaction mechanism was proposed, which involves the active participation of ammonium cations via formamidine and serves as a remarkable point against previous reports. The results discussed here expand the knowledge on HCN wet chemistry, offer an extended view of the relevant parameters during the simulation of hydrothermal scenarios and describe the production of promising paramagnetic and semiconducting materials inspired by prebiotic chemistry., The authors used the research facilities of the Centro de Astrobiologı´a (CAB), CSIC-INTA, and were supported by the Instituto Nacional de Te´cnica Aeroespacial ‘‘Esteban Terradas’’ (INTA) and by the project PID2019-104205GB-C21 from the Spanish Ministry of Science and Innovation and the Spanish State Research Agency MCIN/AEI/10.13039/501100011033. Additionally, the authors are grateful to M. Teresa Ferna´ndez for performing the FTIR and XRD measurements, to the Services of Thermal and Chemical Analysis of the Instituto de Ciencias de Materiales de Madrid (ICMM, CSIC) and to the recently closed Service of Electronic Spin Resonance of the Centro de Ayuda a la Investigación of the Universidad Complutense de Madrid (UCM). C. P-F. also thanks the project PRE2018-085781., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Air effect on both polymerization kinetics and thermal degradation properties of novel HCN polymers based on diaminomaleonitrile

  • Hortelano, C.
  • Ruiz-Bermejo, Marta
  • de la fuente, Jose Luis
The impact of air on the bulk polymerization kinetics of diaminomaleonitrile (DAMN), tetramer of HCN, and thermal degradation properties of this resulting conjugated C=N polymeric system is investigated under different temperature regimes and environments. This study shows the effect of exposure to air and oxygen, time, temperature, and evolved gases during DAMN polymerization reactions, which can be suitably monitored by differential scanning calorimetry (DSC) through both dynamic and isothermal measurements. Thus, low heating rates and isothermal scans at 150-170 °C allow us to describe the solid-state polymerization (SSP) of DAMN, and those experiments at 190, 195 and 200 °C and higher heating runs define its melt polymerization (MP) behaviour. Both processes are highly efficient, possibly due to the self-acceleration nature of their kinetics, which is consistent with a three-step Šesták-Berggren (SB) model. The oxygen effect was analysed to determine their tolerance to this variable and confirm the nonradical nature of the mechanism under study. In addition, a detailed thermal characterization by simultaneous DSC/thermogravimetry coupled to mass spectrometry (TG-MS) of these singular polymeric systems obtained under air atmosphere has been completed, and the improvement of the thermal stability of those samples prepared by an SSP at lower temperature was confirmed. The present work offers lower-cost and simpler synthetic methods to obtain this novel class of promising multifunctional polymeric materials through highly efficient and very fast processes., The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA), by the PID2019-104205GB-C21, PID2019-107442RB-C32 and MDM-2017-0737 Unidad de Excelencia "María de Maeztu" CAB (INTA-CSIC) projects from the Spanish Ministry of Science and Innovation and the Spanish State Research Agency MCIN/AEI/10.13039/501100011033. C. Hortelano want to express his gratitude to INTA for his predoctoral contract., Peerreview