Skip to main content

OPERACION TECNICA Y EXPLOTACION CIENTIFICA DE DATOS EN RLS DE EXOMARS, Y CONTRIBUCION AL RAX DE MMX

PID2019-107442RB-C32

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre INSTITUTO NACIONAL DE TECNICA AEROESPACIAL ESTEBAN TERRADAS (INTA)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 38
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Highly efficient melt polymerization of diaminomaleonitrile

  • Mas, I.
  • Hortelano, C.
  • Ruiz-Bermejo, Marta
  • de la fuente, Jose Luis
Kinetic, structural characteristics and the mechanism for the formation of DAMN polymers was studied. Šesták-Berggren model can successfully describe these melt polymerizations. TG-DSC-MS analysis of DAMN revealed thermal processes during its bulk polymerization. Prebiotic chemistry inspires polymeric materials with advanced performances. These DAMN polymers may be potentially applied as multi-functional materials., HCN polymers are of great interest in research on the origin of life and, currently, in materials science because they have shown potential for the design of electrical devices, (photo)catalysts and biomedicine. Herein, calorimetric measurements have successfully described the bulk polymerization of HCN tetramer, diaminomaleonitrile (DAMN). Two series of nonisothermal experiments were carried out by differential scanning calorimetry (DSC), and low-heating rate (β) the thermograms (β ≤ 5 °C/min) indicated that the polymerization is initiated at temperatures lower than the DAMN melting point, ~180 °C; while higher heating rates results in a rapid polymerization reaction, which occurs entirely in the liquid phase. The DSC data were analysed using model-free linear iso-conversional methods to estimate kinetic parameters, such as activation energy, and a suitable kinetic model was proposed for these thermal polymerizations in the melt. A preliminary structural and morphological characterization by means of Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) was also completed. This study demonstrated the autocatalytic, highly efficient and straightforward character of this stimulated thermal polymerization of DAMN and, to the best of our knowledge, describes for the first time a systematic and extended kinetic analysis to gain mechanistic insights into this process. The latter was done through the help of simultaneous thermogravimetry (TG)-DSC and in situ mass spectrometry (MS) technique to investigate the gas products generated during these melt polymerizations. These analyses revealed that deamination and dehydrocyanation processes are two relevant reactions involved in DAMN polymerization mechanism., The authors used the research facilities of the Centro de Astrobiologia (CAB) and were supported by the Instituto Nacional de Tecnica Aeroespacial Esteban Terradas (INTA), by the projects ESP2017-89053-C2-2-P, PID2019-104205GB-C21 and PID2019-107442RB-C32 from the Spanish Ministerio de Ciencia, Innovacion y Universidades and by the Spanish State Research Agency (AEI) project MDM-2017-0737 Centro de Astrobiologia (CSIC-INTA), Unidad de Excelencia Maria de Maeztu. C. Hortelano wants to express his gratitude to INTA for this training scholarship. Additionally, the authors are grateful to M<SUP>a</SUP> Teresa Fernandez from CAB for performing the FTIR spectra and to Pilar Valles from INTA for recording the SEM images., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

APTES-Based Silica Nanoparticles as a Potential Modifier for the Selective Sequestration of CO2 Gas Molecules

  • Cueto Díaz, Eduardo J.
  • Valles González, M. P.
  • Torquemada, M. C.
  • Gálvez Martínez, Santos
  • Suárez García, Fabián
  • Castro Muñiz, Alberto
  • Mateo Marti, Eva
In this work, we have described the characterization of hybrid silica nanoparticles of 50 nm size, showing outstanding size homogeneity, a large surface area, and remarkable CO2 sorption/desorption capabilities. A wide battery of techniques was conducted ranging from spectroscopies such as: UV-Vis and IR, to microscopies (SEM, AFM) and CO2 sorption/desorption isotherms, thus with the purpose of the full characterization of the material. The bare SiO2 (50 nm) nanoparticles modified with 3-aminopropyl (triethoxysilane), APTES@SiO2 (50 nm), show a remarkable CO2 sequestration enhancement compared to the pristine material (0.57 vs. 0.80 mmol/g respectively at 50 °C). Furthermore, when comparing them to their 200 nm size counterparts (SiO2 (200 nm) and APTES@SiO2 (200 nm)), there is a marked CO2 capture increment as a consequence of their significantly larger micropore volume (0.25 cm3/g). Additionally, ideal absorbed solution theory (IAST) was conducted to determine the CO2/N2 selectivity at 25 and 50 °C of the four materials of study, which turned out to be >70, being in the range of performance of the most efficient microporous materials reported to date, even surpassing those based on silica., This work has been supported by the MINECO grant PID2019-104205GB-C21 and PID2019-107442RB-C32 and has been partially funded by the Spanish State Research Agency (AEI) Project No. MDM-2017-0737 Unidad de Excelencia “María de Maeztu”-Centro de Astrobiología (INTA-CSIC) and by ERDF through projects RTI2018-100832-B-I00 and IDI/2018/000233. E. C. D: Talent Attraction Postdoctoral Fellowship from CAM, reference: 2018-T2/TIC-10616., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Catalytic effects over formation of functional thermoplastic elastomers for rocket propellants

  • Lucio, B.
  • de la fuente, Jose Luis
Rheometry was the main method to characterize the curing process of binders made of functional polyurethanes (PUs). The macroglycols characterization by means of additional techniques such as nuclear magnetic resonance, size exclusion chromatography and differential scanning calorimetry, provided further information for the chemorheological description. Materials were based on Butacene ((ferrocenylbutyl)dimethylsilane grafted to hydroxyl-terminated polybutadiene (HTPB)), used in the solid propulsion field. First, the flow parameters for the uncured reactive mixtures of Butacene and four different diisocyanates were analysed via viscometry and these were markedly influenced by the chemical structure of the curing agents. Analysing the rheokinetic constant values of the pre-gel stage for Butacene- and HTPB-reactive systems, relevant catalysis caused by the ferrocene moiety was detected when aliphatic reactants were used, such as isophorone diisocyanate or 1,6-hexamethylene diisocyanate (IPDI and HMDI, respectively). No catalytic effect was found for 2,4-toluene diisocyanate (2,4-TDI) or even for 4,4’-methylenediphenyl diisocyanate (4,4’-MDI). Finally, the use of dynamic rheology was useful to evaluate the critical points during gelation process, where the reactivity of curing agents was associated with the achievement of elastic properties. Both techniques agreed the reactivity order of curing agents with Butacene, which is 4,4’-MDI > HMDI >> 2,4-TDI ≥ IPDI. The knowledge of the structure-reactivity relationship and, moreover, the kinetics of the urethane network formation for these metallo-PUs is paramount in manufacturing processes for advanced thermoplastic elastomer applications., The authors are grateful to INTA for the financial support through the FPI fellowship programme (2011-2015), to the Spanish Ministerio de Ciencia e Innovación from the PID2019-107442RB-C32 project, and to Gobierno Vasco., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

A dual perspective on the microwave-assisted synthesis of HCN polymers towards the chemical evolution and design of functional materials

  • Hortal, Lucia
  • Pérez Fernández, Cristina
  • de la fuente, Jose Luis
  • Valles González, M. P.
  • Mateo Marti, Eva
  • Ruiz-Bermejo, Marta
In this paper, the first study on NH4CN polymerization induced by microwave radiation is described, where a singular kinetic behaviour, especially when this reaction is conducted in the absence of air, is found. As a result, a complex conjugated N-heterocyclic polymer system is obtained, whose properties are very different, and even improved according to morphological features, characterized by their X-ray diffraction patterns and scanning electron microscopy analysis, with respect to those produced under conventional thermal treatment. In addition, a wide variety of relevant bioorganics have been identified, such as amino acids, nucleobases, co-factors, etc., from the synthetized NH4CN polymers. These particular families of polymers are of high interest in the fields of astrobiology and prebiotic chemistry and, more recently, in the development of smart multifunctional materials. From an astrobiological perspective, microwave-driven syntheses may simulate hydrothermal environments, which are considered ideal niches for increasing organic molecular complexity, and eventually as scenarios for an origin of life. From an industrial point of view and for potential applications, a microwave irradiation process leads to a notable decrease in the reaction times, and tune the properties of these new series macromolecular systems. The characteristics found for these materials encourage the development of further systematic research on this alternative HCN polymerization., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (MDM-2017-0737); The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA), by projects ESP2017-89053-C2-2-P, PID2019-104205GB-C21 and PID2019-107442RB-C32 from the Spanish Ministerio de Ciencia, Innovación y Universidades and by the Spanish State Research Agency (AEI) project MDM-2017-0737 Centro de Astrobiología (CSIC-INTA), Unidad de Excelencia María de Maeztu. Additionally, the authors are grateful to Mª Teresa Fernández from CAB for performing the FT-IR spectra and Pedro Rayo for her assistance in the GC-MS analyses., Peer review
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Raman spectroscopy coupled to principal component analysis for studying UO2 nuclear fuels with different grain sizes due to the chromia addition

  • Milena Pérez, A.
  • Bonales, L. J.
  • Rodríguez Villagra, N.
  • Fernández Carretero, Sergio
  • Baonza, V. G.
  • Cobos, J.
Current necessities of nuclear power plants have led to increase burn-up of the fuel during operation. In this context, some undesirable processes, such as a higher release of gaseous fission products, may occur. New UO2-based fuels are being developed by adding doping agents. Chromia (Cr2O3) has proved to considerably enhance grain growth during sintering, and thus promote the retention of these fission products. The study of these Cr-doped UO2 fuels at in situ conditions would allow testing the real performance of the fuel in operating conditions. The existence of Raman portable instruments makes this scenario feasible. But first, the measurement protocols need to be developed. Therefore, in this paper, we explore the use of Raman spectroscopy as an approach for the analysis of the effect of Cr2O3 addition in a set of UO2single bondCr2O3 sintered pellets. The validity of Raman is demonstrated by using Principal Component Analysis (PCA). Three Principal Components describe 98.8% of the total variance of the data, and they are related to the main Raman modes of the samples. In addition, SEM images have shown the presence of bigger precipitates of Cr2O3 not only when the solubility limit of Cr3+ is exceeded, but also when it is not reached. By XRD, the well-known Vegard behavior is observed, and a solubility limit of Cr3+dissolved into the UO2 matrix is found to be (748±16) ppm for the particular sintering conditions used., This work was supported by the Spanish MINECO projects ESP2017-89053-C2-1-P and PID2019-107442RB-C32, and the AEI project MDM-2017-0737 Unidad de Excelencia Maria de Maeztu. Authors also want to thank the funding for this research from the European Commission Horizon 2020 Research and Training Programme DisCo (Modern Spent Fuel Dissolution and Chemistry in Failed Container Conditions), under grant agreement number 755443., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Multivariate Analysis Applied to Microwave-Driven Cyanide Polymerization: A Statistical View of a Complex System

  • Pérez Fernández, Cristina
  • González-Toril, Elena
  • Mateo Marti, Eva
  • Ruiz-Bermejo, Marta
Mateo-Martí, E [0000-0003-4709-4676] ; Ruiz-Bermejo, M. [0000-0002-8059-1335], For the first time, chemometrics was applied to the recently reported microwave-driven cyanide polymerization. Fast, easy, robust, low-cost, and green-solvent processes are characteristic of these types of reactions. These economic and environmental benefits, originally inspired by the constraints imposed by plausible prebiotic synthetic conditions, have taken advantage of the development of a new generation of HCN-derived multifunctional materials. HCN-derived polymers present tunable properties by temperature and reaction time. However, the apparently random behavior observed in the evolution of cyanide polymerizations, assisted by microwave radiation over time at different temperatures, leads us to study this highly complex system using multivariate analytical tools to have a proper view of the system. Two components are sufficient to explain between 84 and 98% of the total variance in the data in all principal component analyses. In addition, two components explain more than 91% of the total variance in the data in the case of principal component analysis for categorical data. These consistent statistical results indicate that microwave-driven polymerization is a more robust process than conventional thermal syntheses but also that plausible prebiotic chemistry in alkaline subaerial environments could be more complex than in the aerial part of these systems, presenting a clear example of the “messy chemistry” approach of interest in the research about the origins of life. In addition, the methodology discussed herein could be useful for the data analysis of extraterrestrial samples and for the design of soft materials, in a feedback view between prebiotic chemistry and materials science., "This research was funded by grants PID2019-104205GB-C21, PID2019-107442RBC32 and PID2019-104205GB-C22 from the Spanish Ministry of Science and Innovation/State Agency of Research MCIN/AEI/10.13039/501100011033.", Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

An XPS study of HCN-derived films on pyrite surfaces: a prebiotic chemistry standpoint towards the development of protective coatings

  • Pérez Fernández, Cristina
  • Ruiz-Bermejo, Marta
  • Gálvez Martínez, Santos
  • Mateo Marti, Eva
This journal is © The Royal Society of Chemistry 2021, Traditionally, the effect of mineral surfaces on increasing molecular complexity has been considered a major issue in studies about the origin of life. In contrast, herein, the effects of organic films derived from cyanide over an important prebiotic mineral, pyrite, are considered. An XPS spectroscopy study was carried out to understand the surface chemistry of the HCN-derived polymer/pyrite system. As a result, the simulation of a plausible prebiotic alkaline hydrothermal environment led to the identification of an NH4CN-based film with protective corrosion properties that immediately prevented the oxidation of the highly reactive pyrite surface. In addition, the effect of coating with antioxidant properties was preserved over a relatively long time, and the polymeric film was very stable under ambient conditions. These results increase the great potential of HCN polymers for development as a cheap and easily produced new class of multifunctional polymeric materials that also show promising and attractive insights into prebiotic chemistry., The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA), by the projects PID2019-104205GB-C21 and PID2019-107442RB-C32 from the Spanish Ministerio de Ciencia, Innovación y Universidades and by the Spanish State Research Agency (AEI) project MDM-2017-0737 Centro de Astrobiología (CSIC-INTA), Unidad de Excelencia María de Maeztu. We acknowledge S. Martín and B. Martín for cutting and polishing the pyrite samples and Thomas and Celine Huttel Serrano for providing them., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Geomorphology of the southwest Sinus Sabaeus region: evidence for an ancient hydrological cycle on Mars

  • Robas, C.
  • Molina, A.
  • López, I.
  • Prieto-Ballesteros, Olga
  • Fairén, Alberto G.
We have produced a 1:650,000 scale geomorphological map of the southwest Sinus Sabaeus, a region of Mars approximately centered at 25.0°S and 6.5°E and located in the topographic transition between Arabia Terra and Noachis Terra, in the Martian highlands. This heavily cratered region, subjected to extensive surface erosion, shows a complex valley network system known as Marikh Vallis. In this work, we study the history and role of water in and around Marikh Vallis, focusing on the modification and evolution of this area during the earliest Martian times, the Noachian period. The map described in this paper was produced through the analysis of a combination of available imagery data, topography, and thermal inertia, which together allow defining different geomorphological units in this area. This new map provides a basis for identifying the ancient presence of water in the region, both in the liquid state and in the ice phase., This work was supported by the European Research Council Consolidator Grant number 818602; the Agencia Estatal de Investigación (AEI) under Grant PID2019-107442RB-C32; and the AEI under Grant MDM-2017-0737 Unidad de Excelencia ‘María de Maeztu’. The authors also thank the Rey Juan Carlos University.This work was supported by Agencia Estatal de Investigación: [grant number MDM-2017-0737,PID2019-107442RB-C32]. European Research Council: [grant num ber 818602]., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

ExoFiT trial at the Atacama Desert (Chile): Raman detection of biomarkers by representative prototypes of the ExoMars/Raman Laser Spectrometer

  • Veneranda, M.
  • López Reyes, G.
  • Saiz, J.
  • Manrique, J. A.
  • Sanz Arranz, Aurelio
  • Medina García, J.
  • Moral, Andoni G.
  • Seoane, Laura
  • Ibarmia, S.
  • Rull, F.
In this work, the analytical research performed by the Raman Laser Spectrometer (RLS) team during the ExoFiT trial is presented. During this test, an emulator of the Rosalind Franklin rover was remotely operated at the Atacama Desert in a Mars-like sequence of scientific operations that ended with the collection and the analysis of two drilled cores. The in-situ Raman characterization of the samples was performed through a portable technology demonstrator of RLS (RAD1 system). The results were later complemented in the laboratory using a bench top RLS operation simulator and a X-Ray diffractometer (XRD). By simulating the operational and analytical constraints of the ExoMars mission, the two RLS representative instruments effectively disclosed the mineralogical composition of the drilled cores (k-feldspar, plagioclase, quartz, muscovite and rutile as main components), reaching the detection of minor phases (e.g., additional phyllosilicate and calcite) whose concentration was below the detection limit of XRD. Furthermore, Raman systems detected many organic functional groups (–C≡N, –NH2 and C–(NO2)), suggesting the presence of nitrogen-fixing microorganisms in the samples. The Raman detection of organic material in the subsurface of a Martian analogue site presenting representative environmental conditions (high UV radiation, extreme aridity), supports the idea that the RLS could play a key role in the fulfilment of the ExoMars main mission objective: to search for signs of life on Mars., This work is financed through the European Research Council in the H2020-COMPET-2015 programme (Grant 687302) and the Ministry of Economy and Competitiveness (MINECO, Grants ESP2017-87690-C3-1-R and PID2019-107442RB-C31). The authors would also like recognize the support of the European Space Agency (ESA) and are grateful to all ExoMars team members participating in the ExoFiT trial., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Tuning the Morphology in the Nanoscale of NH4CN Polymers Synthesized by Microwave Radiation: A Comparative Study

  • Pérez Fernández, Cristina
  • Valles González, M. P.
  • González-Toril, Elena
  • Mateo Marti, Eva
  • de la fuente, Jose Luis
  • Ruiz-Bermejo, Marta
A systematic study is presented to explore the NH4CN polymerization induced by microwave (MW) radiation, keeping in mind the recent growing interest in these polymers in material science. Thus, a first approach through two series, varying the reaction times and the temperatures between 130 and 205 °C, was conducted. As a relevant outcome, using particular reaction conditions, polymer conversions similar to those obtained by means of conventional thermal methods were achieved, with the advantage of a very significant reduction of the reaction times. The structural properties of the end products were evaluated using compositional data, spectroscopic measurements, simultaneous thermal analysis (STA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). As a result, based on the principal component analysis (PCA) from the main experimental results collected, practically only the crystallographic features and the morphologies in the nanoscale were affected by the MW-driven polymerization conditions with respect to those obtained by classical syntheses. Therefore, MW radiation allows us to tune the morphology, size and shape of the particles from the bidimensional C=N networks which are characteristic of the NH4CN polymers by an easy, fast, low-cost and green-solvent production. These new insights make these macromolecular systems attractive for exploration in current soft-matter science., This research was funded by the projects PID2019-104205GB-C21, PID2019-107442RB-C32 and PID2019-104205GB-C22 from the Spanish Ministerio de Ciencia e Innovación, and by the Spanish State Research Agency, project MDM-2017-0737: Centro de Excelencia Científica María de Maeztu Centro de Astrobiología (CSIC-INTA), Unidad de Excelencia María de Maeztu. C.P.-F. was supported by a research training grant from the Spanish Ministerio de Ciencia e Innovación, PRE2018-085781., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Air effect on both polymerization kinetics and thermal degradation properties of novel HCN polymers based on diaminomaleonitrile

  • Hortelano, C.
  • Ruiz-Bermejo, Marta
  • de la fuente, Jose Luis
The impact of air on the bulk polymerization kinetics of diaminomaleonitrile (DAMN), tetramer of HCN, and thermal degradation properties of this resulting conjugated C=N polymeric system is investigated under different temperature regimes and environments. This study shows the effect of exposure to air and oxygen, time, temperature, and evolved gases during DAMN polymerization reactions, which can be suitably monitored by differential scanning calorimetry (DSC) through both dynamic and isothermal measurements. Thus, low heating rates and isothermal scans at 150-170 °C allow us to describe the solid-state polymerization (SSP) of DAMN, and those experiments at 190, 195 and 200 °C and higher heating runs define its melt polymerization (MP) behaviour. Both processes are highly efficient, possibly due to the self-acceleration nature of their kinetics, which is consistent with a three-step Šesták-Berggren (SB) model. The oxygen effect was analysed to determine their tolerance to this variable and confirm the nonradical nature of the mechanism under study. In addition, a detailed thermal characterization by simultaneous DSC/thermogravimetry coupled to mass spectrometry (TG-MS) of these singular polymeric systems obtained under air atmosphere has been completed, and the improvement of the thermal stability of those samples prepared by an SSP at lower temperature was confirmed. The present work offers lower-cost and simpler synthetic methods to obtain this novel class of promising multifunctional polymeric materials through highly efficient and very fast processes., The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA), by the PID2019-104205GB-C21, PID2019-107442RB-C32 and MDM-2017-0737 Unidad de Excelencia "María de Maeztu" CAB (INTA-CSIC) projects from the Spanish Ministry of Science and Innovation and the Spanish State Research Agency MCIN/AEI/10.13039/501100011033. C. Hortelano want to express his gratitude to INTA for his predoctoral contract., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Kinetic Study of the Effective Thermal Polymerization of a Prebiotic Monomer: Aminomalononitrile

  • Hortelano, C.
  • Ruiz-Bermejo, Marta
  • de la fuente, Jose Luis
Aminomalononitrile (AMN), the HCN formal trimer, is a molecule of interest in prebiotic chemistry, in fine organic synthesis, and, currently, in materials science, mainly for bio-applications. Herein, differential scanning calorimetry (DSC) measurements by means of non-isothermal experiments of the stable AMN p-toluenesulfonate salt (AMNS) showed successful bulk AMN polymerization. The results indicated that this thermally stimulated polymerization is initiated at relatively low temperatures, and an autocatalytic kinetic model can be used to appropriately describe, determining the kinetic triplet, including the activation energy, the pre-exponential factor, and the mechanism function (Eα, A and f(α)). A preliminary structural characterization, by means of Fourier transform infrared (FTIR) spectroscopy, supported the effective generation of HCN-derived polymers prepared from AMNS. This study demonstrated the autocatalytic, highly efficient, and straightforward character of AMN polymerization, and to the best of our knowledge, it describes, for the first time, a systematic and extended kinetic analysis for gaining mechanistic insights into this process. The latter was accomplished through the help of simultaneous thermogravimetry (TG)-DSC and the in situ mass spectrometry (MS) technique for investigating the gas products generated during these polymerizations. These analyses revealed that dehydrocyanation and deamination processes must be important elimination reactions involved in the complex AMN polymerization mechanism., This research was funded by the projects PID2019-104205GB-C21 and PID2019-107442RB-C32 from the Spanish Ministry of Science and Innovation and the Spanish State Research Agency MCIN/AEI/10.13039/501100011033. The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA), by the PID2019-104205GB-C21 and PID2019-107442RB-C32 projects from the Spanish Ministry of Science and Innovation and the Spanish State Research Agency MCIN/AEI/10.13039/501100011033. C. Hortelano wants to express his gratitude to INTA for his predoctoral contract. Additionally, the authors are grateful to the “Servicio de Análisis Térmico” of ICMM (CSIC, Spain)., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

CO2 adsorption capacities of amine-functionalized microporous silica nanoparticles

  • Cueto Díaz, Eduardo J.
  • Suárez García, Fabián
  • Gálvez Martínez, Santos
  • Valles González, M. P.
  • Mateo Marti, Eva
Efforts on CO2 capture have intensified as climate change compromises ecosystems and biodiversity. Therefore, it is crucial to develop different methods for CO2 sequestration to improve solid sorbent capabilities (NPs). To this end, the surface of 200-nm silica nanoparticles (SiO2NPs) was covalently anchored with aminated ligands, 3-aminopropyltriethoxysilane (APTES), poly(amidoamine) dendrimers (PAMAM) and a short peptide comprising two lysine units, aiming for CO2 adsorption over a wide range of pressures. Our goal was to explore the influence of functional chemical groups (attached to the SiO2NPs) on CO2 sequestration. The observed results showed that at low and high CO2 gas pressure conditions, typical APTES functionalized SiO2Np surpassed the CO2 adsorption capacities of dendritic and peptide-based nanoparticles bearing amine-polymer functionalities, a remarkable effect that was investigated in this work. In addition, a convenient and facile method to decorate and quantify SiO2 nanoparticles with PAMAM and a short peptide is reported., This work has been supported by MINECO grants PID2019-104205GB-C21 and PID2019-107442RB-C32) and has been partially funded by the Spanish State Research Agency (AEI) Project No. MDM-2017-0737 Unidad de Excelencia “María de Maeztu”-Centro de Astrobiología (INTA-CSIC) and by PCTI 2013-2017 from the Principado de Asturias and ERDF through projects RTI2018-100832-B-I00 and IDI/2018/000233. E. C. D: Talent Attraction Postdoctoral Fellowship from CAM, reference: 2018-T2/TIC-10616. The authors also thank Maite Sampedro for her help during IR measurements., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Semiconducting Soft Submicron Particles from the Microwave-Driven Polymerization of Diaminomaleonitrile

  • Ruiz-Bermejo, Marta
  • de la fuente, Jose Luis
  • García Armada, Pilar
  • Valles González, M. P.
Ruiz-Bermejo, M. [0000-0002-8059-1335] ; García Armada, P. [0000-0003-2410-3365], The polymers based on diaminomaleonitrile (DAMN polymers) are a special group within an extensive set of complex substances, namely HCN polymers (DAMN is the formal tetramer of the HCN), which currently present a growing interest in materials science. Recently, the thermal polymerizability of DAMN has been reported, both in an aqueous medium and in bulk, offering the potential for the development of capacitors and biosensors, respectively. In the present work, the polymerization of this plausible prebiotic molecule has been hydrothermally explored using microwave radiation (MWR) via the heating of aqueous DAMN suspensions at 170–190 °C. In this way, polymeric submicron particles derived from DAMN were obtained for the first time. The structural, thermal decomposition, and electrochemical properties were also deeply evaluated. The redox behavior was characterized from DMSO solutions of these highly conjugated macromolecular systems and their potential as semiconductors was described. As a result, new semiconducting polymeric submicron particles were synthetized using a very fast, easy, highly robust, and green-solvent process. These results show a new example of the great potential of the polymerization assisted by MWR associated with the HCN-derived polymers, which has a dual interest both in chemical evolution and as functional materials., The authors used the research facilities of the Centro de Astrobiología (CAB), CSIC-INTA, and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA), by the projects PID2019-104205GB-C21 and PID2019-107442RB-C32 from the Spanish Ministry of Science and Innovation, and by the Spanish State Research Agency (AEI) project MDM-2017-0737 CAB (CSIC-INTA), Unidad de Excelencia María de Maeztu. Additionally, the authors are grateful to Mª Teresa Fernández for performing the FTIR and XRD measurements, to Alexandra Muñoz Bonilla for the support in the GPC analysis and to the Services of Thermal and Chemical Analysis and Nuclear Magnetic Resonance of the Instituto de Ciencias de Materiales de Madrid (ICMM, CSIC). M.R.-B. also thanks Sabino Veintemillas for his useful helpful in the DLS measurements., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Prebiotic synthesis of noncanonical nucleobases under plausible alkaline hydrothermal conditions

  • Pérez Fernández, Cristina
  • Vega, Jorge
  • Rayo Pizarroso, P.
  • Mateo Marti, Eva
  • Ruiz-Bermejo, Marta
Herein, the potential of alkaline hydrothermal environments for the synthesis of possible ancestral pre-RNA nucleobases using cyanide as a primary source of carbon and nitrogen is described. Water cyanide polymerizations were assisted by microwave radiation to obtain high temperature and a relatively high pressure (MWR, 180 °C, 15 bar) and were also carried out using a conventional thermal system (CTS, 80 °C, 1 bar) to simulate subaerial and aerial hydrothermal conditions, respectively, on the early Earth. For these syntheses, the initial concentration of cyanide and the diffusion effects were studied. In addition, it is well known that hydrolysis conditions are directly related to the amount and diversity of organic molecules released from cyanide polymers. Thus, as a first step, we studied the effect of several hydrolysis procedures, generally used in prebiotic chemistry, on some of the potential pre-RNA nucleobases of interest, together with some of their isomers and/or deamination products, also presumably formed in these complex reactions. The results show that the alkaline hydrothermal scenarios with a relatively constant pH are good geological scenarios for the generation of noncanonical nucleobases using cyanide as a prebiotic precursor., The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA); by the projects PID2019-104205GB-C21 and PID2019-107442RB-C32 from the Spanish Ministerio de Ciencia, Innovación y Universidades; and by the Spanish State Research Agency, project MDM-2017-0737 Centro de Astrobiología (CSIC-INTA), Unidad de Excelencia María de Maeztu. C.P.F. Ph-D MINECO financial support reference PRE2018-085781., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Analytical database of Martian minerals (ADaMM): Project synopsis and Raman data overview

  • Veneranda, M.
  • Sanz Arranz, Aurelio
  • Manrique, J. A.
  • Saiz, M.
  • García Prieto, C.
  • Pascual Sánchez, Elena
  • Medina García, J.
  • Konstantinidis, M.
  • Lalla, E.
  • Moral, A.
  • Nieto Calzada, L. M.
  • Rull, F.
  • López Reyes, G.
Research Article. Early View. Special Issue., The Mars2020/Perseverance and ExoMars/Rosalind Franklin rovers are both slated to return the first Raman spectra ever collected from another planetary surface, Mars. In order to optimize the rovers scientific outcome, the scientific community needs to be provided with tailored tools for data treatment and interpretation. Responding to this need, the purpose of the Analytical Database of Martian Minerals (ADaMM) project is to build an extended multianalytical database of mineral phases that have been detected on Mars or are expected to be found at the landing sites where the two rovers will operate. Besides the use of conventional spectrometers, the main objective of the ADaMM database is to provide access to data collected by means of laboratory prototypes simulating the analytical performances of the spectroscopic systems onboard the Mars 2020 and ExoMars rovers. Planned to be released to the public in 2022, ADaMM will also provide access to data treatment and visualization tools developed in the framework of the mentioned space exploration missions. As such, the present work seeks to provide an overview of the ADaMM online platform, spectral tools, and mineral collection. In addition to that, the manuscript describes the Raman spectrometers used to analyze the mineral collection and presents a representative example of the analytical performance ensured by the Raman prototypes assembled to simulate the Raman Laser Spectrometer (RLS) and SuperCam systems., This work is funded by the H2020 European Research Council (grant 687302) and the Ministry of Economy and Competitiveness (MINECO, grant PID2019-107442RB C31)., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

HCN-derived polymers from thermally induced polymerization of diaminomaleonitrile: A non-enzymatic peroxide sensor based on prebiotic chemistry

  • Ruiz-Bermejo, Marta
  • Mateo Marti, Eva
  • de la fuente, Jose Luis
  • García Armada, Pilar
HCN-derived polymers have recently attracted considerable attention due to their promising applications as multifunctional materials. This study, inspired by plausible early Earth geochemical conditions, describes a strategy to synthesize them from the self-initiated thermal bulk polymerization of the HCN tetramer, diaminomaleonitrile (DAMN), with outstanding sensing properties. These conjugated polymers were obtained through noncatalysed and simple isothermal reactions at 170 °C in the solid-state, and experiments at 190 °C permitted polymerization in the melt. Both processes are highly efficient, allowing quantitative yields of the end products. The conductivity properties of both polymers have been explored to show their high potential, especially DAMN polymers synthesized in melt, as nonenzymatic peroxide sensors. To better understand the differences found between the two series, structural characterisation was carried out using compositional data, Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR) and X-ray photoelectron (XPS) spectroscopies, and X-ray diffraction (XRD) measurements. The interpretation of the structural data suggests that a two-dimensional (2-D) macrostructure based on N-heterocyclics is predominant regardless of the state of monomer aggregation during the course of polymerization, but preferably formed in the melt. The morphological and thermal stability properties of the polymers based on DAMN were also evaluated. Finally, the most likely mechanisms based on the dehydrocyanation and deamination reactions that take place during the polymerization reaction are proposed. This study demonstrates the robust and straightforward character of these thermally activated polymerizations, which are of interest to chemical evolution research and to current materials and surface science., The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA), by the projects PID2019-104205 GB-C21 and PID2019-107442RB-C32 from the Spanish Ministerio de Ciencia e Innovaci´on, and by the Spanish State Research Agency (AEI) project MDM-2017-0737 CAB (CSIC-INTA), Unidad de Excelencia María de Maeztu., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Rheological kinetics of ferrocenylsilane functionalized polyurethanes based on 4,4'-methylenediphenyl diisocyanate for advanced energetic materials

  • Lucio, B.
  • de la fuente, Jose Luis
4,4’-Methylenediphenyl diisocyanate (4,4’-MDI) is a symmetric aromatic isocyanate commonly used as a curing agent in the production of polyurethanes (PUs). The chemorheology and kinetics of its reaction with a metallocenic-prepolymer derivative from hydroxyl-terminated polybutadiene (HTPB) is studied in bulk and under isothermal conditions at 50-80 °C by means of rheological measurements. The viscosity of the initial part of the PU formation, the pre-gel stage governed by viscous behaviour, is modelled through the Arrhenius rheokinetic model. This thermoplastic elastomer undergoes gelation, a transition that is analysed in depth together with predictions according to percolation theory. The gel point (tgel) is determined from the intersection in tan δ versus curing time for different shear frequencies. From the viscoelastic properties, like the elastic storage modulus (G´), the conversion degree is determined, and the entire polymerization process is modelled through the Kamal-Sourour and Sato kinetic expressions. Significant variation in the reaction orders and the activation energies might reveal a change in the process mechanism, depending on the temperature. This work demonstrates that an indirect method makes it possible to gain relevant knowledge about the chemistry of these thermoplastic PUs during curing, which is essential for their manufacturing. This study merits attention for the development of a new generation of high-performance binders with great potential in aerospace propulsion., "The authors are grateful to INTA for the financial support through the FPI fellowship programme (2011-2015), to the Spanish Ministerio de Ciencia, Innovación y Universidades from the project PID2019-107442RB-C32, and to Gobierno Vasco., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Solid-state polymerization of diaminomaleonitrile: Toward a new generation of conjugated functional materials

  • Hortelano, C.
  • Ruiz-Bermejo, Marta
  • de la fuente, Jose Luis
Kinetic and the mechanism for the solid-state polymerization of DAMN was studied. Šesták-Berggren model can describe these solid-state polymerizations monitoring by DSC. Structural and morphological properties of DAMN polymers were analysed. DAMN polymers may be potentially applied as multi-functional materials., The solid-state polymerization (SSP) of organic molecules to form two-dimensional (2D) materials remains a challenge, especially when these reactions are performed in one pot using a single reagent. As will be shown, the SSP of the HCN tetramer diaminomaleonitrile (DAMN) may be an excellent example of these reactions. Dynamic experiments by differential scanning calorimetry (DSC) allow the analysis of the thermally initiated bulk polymerization of DAMN. Under nonisothermal measurements at low heating rates, a multiple-step polymerization reaction takes place. The SSP of DAMN is highly efficient, possibly due to the autocatalytic nature of its kinetics, which are consistent with the two-parameter Šesták-Berggren (SB) model and describe the three stages found in its complicated mechanism, confirmed also from an analysis of the variation in the apparent activation energy with the conversion degree. Relevant mechanistic aspects, such as the dehydrocyanation and deamination processes during SSP, are extracted by thermogravimetry-mass spectrometry (TG-MS). Moreover, some structural and morphological properties of these materials are characterized by Fourier-transform infrared (FTIR) spectroscopy and microscopy. All this information allows us to propose hypothetical pathways for the production of a complex conjugated system, predominantly constituted by a 2D macrostructure based on imidazole rings. This work opens up new possibilities for the synthesis of functional poly(heterocycle) systems, expanding our view of a plausible prebiotic chemical reaction space and providing the foundation for systematic studies of the structure-property relationships of novel HCN-derived polymers, which are currently of great interest in the fields of materials and surface science., The authors used the research facilities of the Centro de Astrobiologia (CAB) and were supported by the Instituto Nacional de T ' ecnica Aeroespacial Esteban Terradas (INTA), by the projects PID2019104205 GB-C21 and PID2019-107442RB-C32 from the Spanish Ministerio de Ciencia, Innovaci ' on y Universidades, and by the Spanish State Research Agency, project MDM-2017-0737 Centro de Astrobiologia (CSIC-INTA), Unidad de Excelencia Maria de Maeztu. C. Hortelano expresses his gratitude to INTA for this training scholarship. Additionally, the authors are grateful to Ma Teresa Fern ' andez for generating the FTIR spectra and to Pilar Valles from INTA for recording the SEM, Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Dark microbiome and extremely low organics in Atacama fossil delta unveil Mars life detection limits

  • Azua Bustos, A.
  • Fairén, A.
  • González Silva, C.
  • Carrizo, D.
  • Sánchez García, Laura
  • Fernández Martínez, Miguel Ángel
  • Escudero, C.
  • Muñoz Iglesias, V.
  • Fernández Sampedro, M.
  • Molina, A.
  • García Villadangos, M.
  • Wierzchos, J.
  • Ascaso, C.
  • Fornado, Teresa
  • Brucato, J. R.
  • Poggiali, G.
  • Manrique, J. A.
  • Veneranda, M.
  • López Reyes, G.
  • Sanz Arranz, Aurelio
  • Rull, F.
  • Ollila, A. M.
  • Wiens, Roger
  • Reyes Newell, Adriana
  • Clegg, S. M.
  • Millan, Maëva
  • Stewart Johnson, Sarah
  • McIntosh, Ophélie
  • Szopa, Cyril
  • Freissinet, Caroline
  • Sekine, Yasuhito
  • Fukushi, Keisuke
  • Morida, Koki
  • Inoue, Kosuke
  • Sakuma, Hiroshi
  • Rampe, Elizabeth
  • Prieto-Ballesteros, Olga
  • Parro, Víctor
  • Moreno Paz, Mercedes
Identifying unequivocal signs of life on Mars is one of the most important objectives for sending missions to the red planet. Here we report Red Stone, a 163-100 My alluvial fan–fan delta that formed under arid conditions in the Atacama Desert, rich in hematite and mudstones containing clays such as vermiculite and smectites, and therefore geologically analogous to Mars. We show that Red Stone samples display an important number of microorganisms with an unusual high rate of phylogenetic indeterminacy, what we refer to as “dark microbiome”, and a mix of biosignatures from extant and ancient microorganisms that can be barely detected with state-of-the-art laboratory equipment. Our analyses by testbed instruments that are on or will be sent to Mars unveil that although the mineralogy of Red Stone matches that detected by ground-based instruments on the red planet, similarly low levels of organics will be hard, if not impossible to detect in Martian rocks depending on the instrument and technique used. Our results stress the importance in returning samples to Earth for conclusively addressing whether life ever existed on Mars., The research leading to these results is a contribution from the Project “MarsFirstWater”, funded by the European Research Council, Consolidator Grant no 818602 to AGF, and by the Human Frontiers Science Program grant n° RGY0066/2018 to A.A.-B. Additional funding provided was provided by MINECO grant PID2019-107442RB-C32 (O.P.-B. and A.M.), Grants-in-Aid for Scientific Research from the Japan Society for Promotion of Science grant numbers 17H06458 and 21H04515 (K.F.), grant numbers 17H06456, 17H06458, 20H00195, and 21H04515 (K.F. and Y.S.), Consejería de Educación e Investigación, Comunidad Autónoma de Madrid/European Social Fund program (MAFM), grant n° ESP2017-87690-C3-3-R (DC), Ramón y Cajal grant n° RYC2018-023943-I (L.S.-G.), AEI grant MDM-2017-0737 and MCIN/AEI grant PID2019-107442RB-C32 (V.M.-I.), MCIU/AEI (Spain) and FEDER (UE) grant n° PGC2018-094076-B-I00 (J.W. and C.A.), Italian Space Agency agreement 2017-48-H.0 (T.F., J.R.B. and G.P.), the Ministry of Science of Spain grant PID2019-107442RB-C31 (J.A.M., M.V., G.L.R., A.A. and F.R.), María Zambrano’ excellence grant program (CA3/RSUE/2021-00405), funded by the Spanish Ministry of Universities (MFM), NASA Mars Exploration Program contracts NNH13ZDA018O, NNH15AZ24I, NNH13ZDA018O and LANL Laboratory Directed Research and Development (LDRD) funding XX5V (A.M.O, R.C.W., A.R. and S.M.C.), NASA-GSFC grant NNX17AJ68G (M.M. and S.S.J.), NES focused on Sample Analysis at Mars of the Mars Science Laboratory mission, and Mars Organic Molecules Analyzer of the Exomars 2022 mission (O.M., C.S., and C.F.), and grants RTI2018-094368-B-I00 and MDM-2017-0737 Unidad de Excelencia “Maria de Maeztu”- Centro de Astrobiología (INTA-CSIC) by the Spanish Ministry of Science and Innovation/State Agency of Research MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” (C.E., M.G.V., M.M.-P., and V.P.). R.C.W. thanks Dot Delapp for performing pre-processing of the LIBS data, Peerreview
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Raman spectroscopy coupled to principal component analysis for studying UO2 nuclear fuels with different grain sizes due to the chromia addition

  • Milena-Pérez, A.
  • Jiménez Bonales, Laura
  • Rodríguez-Villagra, Nieves
  • Fernández, S.
  • Baonza, Valentín G.
  • Cobos, Joaquín
Current necessities of nuclear power plants have led to increase burn-up of the fuel during operation. In this context, some undesirable processes, such as a higher release of gaseous fission products, may occur. New UO2-based fuels are being developed by adding doping agents. Chromia (Cr2O3) has proved to considerably enhance grain growth during sintering, and thus promote the retention of these fission products. The study of these Cr-doped UO2 fuels at in situ conditions would allow testing the real performance of the fuel in operating conditions. The existence of Raman portable instruments makes this scenario feasible. But first, the measurement protocols need to be developed. Therefore, in this paper, we explore the use of Raman spectroscopy as an approach for the analysis of the effect of Cr2O3 addition in a set of UO2single bondCr2O3 sintered pellets. The validity of Raman is demonstrated by using Principal Component Analysis (PCA). Three Principal Components describe 98.8% of the total variance of the data, and they are related to the main Raman modes of the samples. In addition, SEM images have shown the presence of bigger precipitates of Cr2O3 not only when the solubility limit of Cr3+ is exceeded, but also when it is not reached. By XRD, the well-known Vegard behavior is observed, and a solubility limit of Cr3+dissolved into the UO2 matrix is found to be (748±16) ppm for the particular sintering conditions used., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

CO2 adsorption capacities of amine-functionalized microporous silica nanoparticles

  • Cueto-Díaz, Eduardo J.
  • Suárez García, Fabián
  • Gálvez Martínez, Santos
  • Valles-González, María Pilar
  • Mateo-Martí, Eva
Efforts on CO2 capture have intensified as climate change compromises ecosystems and biodiversity. Therefore, it is crucial to develop different methods for CO2 sequestration to improve solid sorbent capabilities (NPs). To this end, the surface of 200-nm silica nanoparticles (SiO2NPs) was covalently anchored with aminated ligands, 3-aminopropyltriethoxysilane (APTES), poly(amidoamine) dendrimers (PAMAM) and a short peptide comprising two lysine units, aiming for CO2 adsorption over a wide range of pressures. Our goal was to explore the influence of functional chemical groups (attached to the SiO2NPs) on CO2 sequestration. The observed results showed that at low and high CO2 gas pressure conditions, typical APTES functionalized SiO2Np surpassed the CO2 adsorption capacities of dendritic and peptide-based nanoparticles bearing amine-polymer functionalities, a remarkable effect that was investigated in this work. In addition, a convenient and facile method to decorate and quantify SiO2 nanoparticles with PAMAM and a short peptide is reported., This work has been supported by MINECO grants PID2019-104205GB-C21 and PID2019-107442RB-C32) and has been partially funded by the Spanish State Research Agency (AEI) Project No. MDM-2017-0737 Unidad de Excelencia “María de Maeztu”-Centro de Astrobiología (INTA-CSIC) and by PCTI 2013-2017 from the Principado de Asturias and ERDF through projects RTI2018-100832-B-I00 and IDI/2018/000233. E. C. D: Talent Attraction Postdoctoral Fellowship from CAM, reference: 2018-T2/TIC-10616. The authors also thank Maite Sampedro for her help during IR measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

APTES-Based Silica Nanoparticles as a Potential Modifier for the Selective Sequestration of CO2 Gas Molecules

  • Cueto-Díaz, Eduardo J.
  • Castro Muñiz, Alberto
  • Suárez García, Fabián
  • Gálvez Martínez, Santos
  • Torquemada-Vico, Mª Carmen
  • Valles-González, María Pilar
  • Mateo-Martí, Eva
In this work, we have described the characterization of hybrid silica nanoparticles of 50 nm size, showing outstanding size homogeneity, a large surface area, and remarkable CO2 sorption/desorption capabilities. A wide battery of techniques was conducted ranging from spectroscopies such as: UV-Vis and IR, to microscopies (SEM, AFM) and CO2 sorption/desorption isotherms, thus with the purpose of the full characterization of the material. The bare SiO2 (50 nm) nanoparticles modified with 3-aminopropyl (triethoxysilane), APTES@SiO2 (50 nm), show a remarkable CO2 sequestration enhancement compared to the pristine material (0.57 vs. 0.80 mmol/g respectively at 50 °C). Furthermore, when comparing them to their 200 nm size counterparts (SiO2 (200 nm) and APTES@SiO2 (200 nm)), there is a marked CO2 capture increment as a consequence of their significantly larger micropore volume (0.25 cm3/g). Additionally, ideal absorbed solution theory (IAST) was conducted to determine the CO2/N2 selectivity at 25 and 50 °C of the four materials of study, which turned out to be >70, being in the range of performance of the most efficient microporous materials reported to date, even surpassing those based on silica., This work has been supported by the MINECO grant PID2019-104205GB-C21 and PID2019-107442RB-C32 and has been partially funded by the Spanish State Research Agency (AEI) Project No. MDM-2017-0737 Unidad de Excelencia “María de Maeztu”-Centro de Astrobiología (INTA-CSIC) and by ERDF through projects RTI2018-100832-B-I00 and IDI/2018/000233. E. C. D: Talent Attraction Postdoctoral Fellowship from CAM, reference: 2018-T2/TIC-10616., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of Surface Organo-Silanization on SBA-15 Mesoporous Silicas in CO2 Adsorption Processes: Design, Synthesis, and Computational Studies

  • Cueto-Díaz, Eduardo J.
  • Castro Muñiz, Alberto
  • Suárez García, Fabián
  • Alkorta, Ibon
  • Valles-González, María Pilar
  • Mateo-Martí, Eva
Carbon dioxide solid sorbents produced from mesoporous functionalized silica microparticles (SBA-15) have been investigated (i) theoretically using density functional theory and (ii) evaluated empirically for assessing their CO adsorption capacity. Two different families of organosilyl groups have been tested possessing a common anchoring group (silanol), in one extreme, but bearing two different types of CO sensitive groups in the other extreme; (i) hyperbranched polymeric PAMAM moieties, carrying multiple −NH groups, and (ii) a collection of linear functional ending groups such as −SH, −SOH, −guanidine (Gdn), −NH, −NCO, and −N. The adsorption isotherms revealed that SBA-15 bearing (3-aminopropyl)triethoxysilane (APTES) showed an impressive 3.4-fold adsorption enhancement at 1 bar and 50 °C when compared to the pristine SBA-15, following a straightforward synthetic protocol. The maximum adsorption capacity was increased from 0.34 mmol/g (SBA-15) to 1.15 mmol/g (SBA-15@NH) under conditions relevant to CO capture (1 bar and 50 °C). We also found intriguing certain discrepancies observed between the calculated CO isotherms and the theorized binding energy in two of the materials. This will be addressed in the present work., This work has been supported by MINECO grants PID2019- 104205GB-C21 and PID2019-107442RB-C32. This study was also financed by Ministerio de Ciencia e Innovació n (MICINN) through project RTI2018-100832-B-I00 and by the Principado de Asturias and the ERDF (project IDI/2021/ 000037). We finally acknowledge funding through Talent Attraction Postdoctoral Fellowship, ref. 2018-T2/TIC-10616, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning the Morphology in the Nanoscale of NH4CN Polymers Synthesized by Microwave Radiation: A Comparative Study

  • Pérez-Fernández, C.
  • Valles, Pilar
  • González-Toril, Elena
  • Mateo-Martí, Eva
  • Fuente, José Luis de la
  • Ruiz Bermejo, Marta
A systematic study is presented to explore the NH4CN polymerization induced by microwave (MW) radiation, keeping in mind the recent growing interest in these polymers in material science. Thus, a first approach through two series, varying the reaction times and the temperatures between 130 and 205 °C, was conducted. As a relevant outcome, using particular reaction conditions, polymer conversions similar to those obtained by means of conventional thermal methods were achieved, with the advantage of a very significant reduction of the reaction times. The structural properties of the end products were evaluated using compositional data, spectroscopic measurements, simultaneous thermal analysis (STA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). As a result, based on the principal component analysis (PCA) from the main experimental results collected, practically only the crystallographic features and the morphologies in the nanoscale were affected by the MW-driven polymerization conditions with respect to those obtained by classical syntheses. Therefore, MW radiation allows us to tune the morphology, size and shape of the particles from the bidimensional C=N networks which are characteristic of the NH4CN polymers by an easy, fast, low-cost and green-solvent production. These new insights make these macromolecular systems attractive for exploration in current soft-matter science., This research was funded by the projects PID2019-104205GB-C21, PID2019-107442RBC32 and PID2019-104205GB-C22 from the Spanish Ministerio de Ciencia e Innovación, and by the Spanish State Research Agency, project MDM-2017-0737 Centro de Astrobiología (CSIC-INTA), Unidad de Excelencia María de Maeztu. C.P.-F. was supported by a research training grant from the Spanish Ministerio de Ciencia e Innovación, PRE2018-085781., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

HCN-derived polymers from thermally induced polymerization of diaminomaleonitrile: A non-enzymatic peroxide sensor based on prebiotic chemistry

  • Ruiz Bermejo, Marta
  • García-Armada, Pilar
  • Mateo-Martí, Eva
  • Fuente, José Luis de la
HCN-derived polymers have recently attracted considerable attention due to their promising applications as multifunctional materials. This study, inspired by plausible early Earth geochemical conditions, describes a strategy to synthesize them from the self-initiated thermal bulk polymerization of the HCN tetramer, diaminomaleonitrile (DAMN), with outstanding sensing properties. These conjugated polymers were obtained through noncatalysed and simple isothermal reactions at 170 °C in the solid-state, and experiments at 190 °C permitted polymerization in the melt. Both processes are highly efficient, allowing quantitative yields of the end products. The conductivity properties of both polymers have been explored to show their high potential, especially DAMN polymers synthesized in melt, as nonenzymatic peroxide sensors. To better understand the differences found between the two series, structural characterisation was carried out using compositional data, Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR) and X-ray photoelectron (XPS) spectroscopies, and X-ray diffraction (XRD) measurements. The interpretation of the structural data suggests that a two-dimensional (2-D) macrostructure based on N-heterocyclics is predominant regardless of the state of monomer aggregation during the course of polymerization, but preferably formed in the melt. The morphological and thermal stability properties of the polymers based on DAMN were also evaluated. Finally, the most likely mechanisms based on the dehydrocyanation and deamination reactions that take place during the polymerization reaction are proposed. This study demonstrates the robust and straightforward character of these thermally activated polymerizations, which are of interest to chemical evolution research and to current materials and surface science., The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA), by the projects PID2019-104205 GB-C21 and PID2019-107442RB-C32 from the Spanish Ministerio de Ciencia e Innovación, and by the Spanish State Research Agency (AEI) project MDM-2017-0737 CAB (CSIC-INTA), Unidad de Excelencia María de Maeztu., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A lizardite–hcn interaction leading the increasing of molecular complexity in an alkaline hydrothermal scenario: Implications for origin of life studies

  • Villafañe-Barajas, S.A.
  • Ruiz Bermejo, Marta
  • Rayo-Pizarroso, P.
  • Gálvez Martínez, Santos
  • Mateo-Martí, Eva
  • Colin-García, María
Hydrogen cyanide, HCN, is considered a fundamental molecule in chemical evolution. The named HCN polymers have been suggested as precursors of important bioorganics. Some novel researches have focused on the role of mineral surfaces in the hydrolysis and/or polymerization of cyanide species, but until now, their role has been unclear. Understanding the role of minerals in chemical evolution processes is crucial because minerals undoubtedly interacted with the organic molecules formed on the early Earth by different process. Therefore, we simulated the probable interactions between HCN and a serpentinite-hosted alkaline hydrothermal system. We studied the effect of serpentinite during the thermolysis of HCN at basic conditions (i.e., HCN 0.15 M, 50 h, 100 °C, pH > 10). The HCN-derived thermal polymer and supernatant formed after treatment were analyzed by several complementary analytical techniques. The results obtained suggest that: (I) the mineral surfaces can act as mediators in the mechanisms of organic molecule production such as the polymerization of HCN; (II) the thermal and physicochemical properties of the HCN polymer produced are affected by the presence of the mineral surface; and (III) serpentinite seems to inhibit the formation of bioorganic molecules compared with the control (without mineral)., This research was funded by the projects PID2019-104205GB-C21 and PID2019-107442RB-C32 from the Spanish Ministerio de Ciencia, Innovación y Universidades, and by the Spanish State Research Agency, project MDM-2017-0737 Centro de Astrobiología (CSIC-INTA), Unidad de Excelencia María de Maeztu., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An XPS study of HCN-derived films on pyrite surfaces: a prebiotic chemistry standpoint towards the development of protective coatings

  • Pérez-Fernández, C.
  • Ruiz Bermejo, Marta
  • Gálvez Martínez, Santos
  • Mateo-Martí, Eva
Traditionally, the effect of mineral surfaces on increasing molecular complexity has been considered a major issue in studies about the origin of life. In contrast, herein, the effects of organic films derived from cyanide over an important prebiotic mineral, pyrite, are considered. An XPS spectroscopy study was carried out to understand the surface chemistry of the HCN-derived polymer/pyrite system. As a result, the simulation of a plausible prebiotic alkaline hydrothermal environment led to the identification of an NH4CN-based film with protective corrosion properties that immediately prevented the oxidation of the highly reactive pyrite surface. In addition, the effect of coating with antioxidant properties was preserved over a relatively long time, and the polymeric film was very stable under ambient conditions. These results increase the great potential of HCN polymers for development as a cheap and easily produced new class of multifunctional polymeric materials that also show promising and attractive insights into prebiotic chemistry., The authors used the research facilities of the Centro de Astrobiolog´ıa (CAB) and were supported by the Instituto Nacional de T´ecnica Aeroespacial “Esteban Terradas” (INTA), by the projects PID2019-104205GB-C21 and PID2019-107442RBC32 from the Spanish Ministerio de Ciencia, Innovaci´on y Universidades and by the Spanish State Research Agency (AEI) project MDM-2017-0737 Centro de Astrobiolog´ıa (CSIC-INTA), Unidad de Excelencia Mar´ıa de Maeztu., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (MDM-2017-0737)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solid-state polymerization of diaminomaleonitrile: Toward a new generation of conjugated functional materials

  • Hortelano, Carlos
  • Ruiz Bermejo, Marta
  • Fuente, José Luis de la
The solid-state polymerization (SSP) of organic molecules to form two-dimensional (2D) materials remains a challenge, especially when these reactions are performed in one pot using a single reagent. As will be shown, the SSP of the HCN tetramer diaminomaleonitrile (DAMN) may be an excellent example of these reactions. Dynamic experiments by differential scanning calorimetry (DSC) allow the analysis of the thermally initiated bulk polymerization of DAMN. Under nonisothermal measurements at low heating rates, a multiple-step polymerization reaction takes place. The SSP of DAMN is highly efficient, possibly due to the autocatalytic nature of its kinetics, which are consistent with the two-parameter Šesták-Berggren (SB) model and describe the three stages found in its complicated mechanism, confirmed also from an analysis of the variation in the apparent activation energy with the conversion degree. Relevant mechanistic aspects, such as the dehydrocyanation and deamination processes during SSP, are extracted by thermogravimetry-mass spectrometry (TG-MS). Moreover, some structural and morphological properties of these materials are characterized by Fourier-transform infrared (FTIR) spectroscopy and microscopy. All this information allows us to propose hypothetical pathways for the production of a complex conjugated system, predominantly constituted by a 2D macrostructure based on imidazole rings. This work opens up new possibilities for the synthesis of functional poly(heterocycle) systems, expanding our view of a plausible prebiotic chemical reaction space and providing the foundation for systematic studies of the structure-property relationships of novel HCN-derived polymers, which are currently of great interest in the fields of materials and surface science., The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA), by the projects PID2019-104205 GB-C21 and PID2019-107442RB-C32 from the Spanish Ministerio de Ciencia, Innovación y Universidades, and by the Spanish State Research Agency, project MDM-2017-0737 Centro de Astrobiología (CSIC-INTA), Unidad de Excelencia María de Maeztu.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly efficient melt polymerization of diaminomaleonitrile

  • Mas, I.
  • Hortelano, Carlos
  • Ruiz Bermejo, Marta
  • Fuente, José Luis de la
HCN polymers are of great interest in research on the origin of life and, currently, in materials science because they have shown potential for the design of electrical devices, (photo)catalysts and biomedicine. Herein, calorimetric measurements have successfully described the bulk polymerization of HCN tetramer, diaminomaleonitrile (DAMN). Two series of nonisothermal experiments were carried out by differential scanning calorimetry (DSC), and low-heating rate (β) the thermograms (β ≤ 5 °C/min) indicated that the polymerization is initiated at temperatures lower than the DAMN melting point, ~180 °C; while higher heating rates results in a rapid polymerization reaction, which occurs entirely in the liquid phase. The DSC data were analysed using model-free linear iso-conversional methods to estimate kinetic parameters, such as activation energy, and a suitable kinetic model was proposed for these thermal polymerizations in the melt. A preliminary structural and morphological characterization by means of Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) was also completed. This study demonstrated the autocatalytic, highly efficient and straightforward character of this stimulated thermal polymerization of DAMN and, to the best of our knowledge, describes for the first time a systematic and extended kinetic analysis to gain mechanistic insights into this process. The latter was done through the help of simultaneous thermogravimetry (TG)-DSC and in situ mass spectrometry (MS) technique to investigate the gas products generated during these melt polymerizations. These analyses revealed that deamination and dehydrocyanation processes are two relevant reactions involved in DAMN polymerization mechanism., The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA), by the projects ESP2017-89053-C2-2-P, PID2019-104205GB-C21 and PID2019-107442RB-C32 from the Spanish Ministerio de Ciencia, Innovación y Universidades and by the Spanish State Research Agency (AEI) project MDM-2017-0737 Centro de Astrobiología (CSIC-INTA), Unidad de Excelencia María de Maeztu. C. Hortelano wants to express his gratitude to INTA for this training scholarship., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (MDM-2017-0737).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A comprehensive review of HCN-derived polymers

  • Ruiz Bermejo, Marta
  • Fuente, José Luis de la
  • Pérez-Fernández, C.
  • Mateo-Martí, Eva
HCN-derived polymers are a heterogeneous group of complex substances synthesized from pure HCN; from its salts; from its oligomers, specifically its trimer and tetramer, amino-nalono-nitrile (AMN) and diamino-maleo-nitrile (DAMN), respectively; or from its hydrolysis products, such as formamide, under a wide range of experimental conditions. The characteristics and properties of HCN-derived polymers depend directly on the synthetic conditions used for their production and, by extension, their potential applications. These puzzling systems have been known mainly in the fields of prebiotic chemistry and in studies on the origins of life and astrobiology since the first prebiotic production of adenine by Oró in the early years of the 1960s. However, the first reference regarding their possible role in prebiotic chemistry was mentioned in the 19th century by Pflüger. Currently, HCN-derived polymers are considered keys in the formation of the first and primeval protometabolic and informational systems, and they may be among the most readily formed organic macromolecules in the solar system. In addition, HCN-derived polymers have attracted a growing interest in materials science due to their potential biomedical applications as coatings and adhesives; they have also been proposed as valuable models for multifunctional materials with emergent properties such as semi-conductivity, ferroelectricity, catalysis and photocatalysis, and heterogeneous organo-synthesis. However, the real structures and the formation pathways of these fascinating substances have not yet been fully elucidated; several models based on either computational approaches or spectroscopic and analytical techniques have endeavored to shed light on their complete nature. In this review, a comprehensive perspective of HCN-derived polymers is presented, taking into account all the aspects indicated above., This research was funded by the projects PID2019-104205GB-C21 and PID2019-107442RB-C32 from the Spanish Ministerio de Ciencia, Innovación y Universidades and by the Spanish State Research Agency (AEI) project MDM-2017-0737 Centro de Astrobiología (CSIC-INTA), Unidad de Excelencia María de Maeztu., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (MDM-2017-0737)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Air effect on both polymerization kinetics and thermal degradation properties of novel HCN polymers based on diaminomaleonitrile

  • Hortelano, Carlos
  • Ruiz Bermejo, Marta
  • Fuente, José Luis de la
The impact of air on the bulk polymerization kinetics of diaminomaleonitrile (DAMN), tetramer of HCN, and thermal degradation properties of this resulting conjugated C=N polymeric system is investigated under different temperature regimes and environments. This study shows the effect of exposure to air and oxygen, time, temperature, and evolved gases during DAMN polymerization reactions, which can be suitably monitored by differential scanning calorimetry (DSC) through both dynamic and isothermal measurements. Thus, low heating rates and isothermal scans at 150-170 °C allow us to describe the solid-state polymerization (SSP) of DAMN, and those experiments at 190, 195 and 200 °C and higher heating runs define its melt polymerization (MP) behaviour. Both processes are highly efficient, possibly due to the self-acceleration nature of their kinetics, which is consistent with a three-step Šesták-Berggren (SB) model. The oxygen effect was analysed to determine their tolerance to this variable and confirm the nonradical nature of the mechanism under study. In addition, a detailed thermal characterization by simultaneous DSC/thermogravimetry coupled to mass spectrometry (TG-MS) of these singular polymeric systems obtained under air atmosphere has been completed, and the improvement of the thermal stability of those samples prepared by an SSP at lower temperature was confirmed. The present work offers lower-cost and simpler synthetic methods to obtain this novel class of promising multifunctional polymeric materials through highly efficient and very fast processes., The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA), by the PID2019-104205GB-C21, PID2019-107442RB-C32 and MDM-2017-0737 Unidad de Excelencia "María de Maeztu" CAB (INTA-CSIC) projects from the Spanish Ministry of Science and Innovation and the Spanish State Research Agency MCIN/AEI/10.13039/501100011033. C. Hortelano want to express his gratitude to INTA for his predoctoral contract., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (MDM-2017-0737).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Prebiotic synthesis of noncanonical nucleobases under plausible alkaline hydrothermal conditions

  • Pérez-Fernández, C.
  • Vega, Jorge
  • Rayo-Pizarroso, P.
  • Mateo-Martí, Eva
  • Ruiz Bermejo, Marta
Herein, the potential of alkaline hydrothermal environments for the synthesis of possible ancestral pre-RNA nucleobases using cyanide as a primary source of carbon and nitrogen is described. Water cyanide polymerizations were assisted by microwave radiation to obtain high temperature and a relatively high pressure (MWR, 180 °C, 15 bar) and were also carried out using a conventional thermal system (CTS, 80 °C, 1 bar) to simulate subaerial and aerial hydrothermal conditions, respectively, on the early Earth. For these syntheses, the initial concentration of cyanide and the diffusion effects were studied. In addition, it is well known that hydrolysis conditions are directly related to the amount and diversity of organic molecules released from cyanide polymers. Thus, as a first step, we studied the effect of several hydrolysis procedures, generally used in prebiotic chemistry, on some of the potential pre-RNA nucleobases of interest, together with some of their isomers and/or deamination products, also presumably formed in these complex reactions. The results show that the alkaline hydrothermal scenarios with a relatively constant pH are good geological scenarios for the generation of noncanonical nucleobases using cyanide as a prebiotic precursor., The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA); by the projects PID2019-104205GB-C21 and PID2019-107442RB-C32 from the Spanish Ministerio de Ciencia, Innovación y Universidades; and by the Spanish State Research Agency, project MDM-2017-0737 Centro de Astrobiología (CSIC-INTA), Unidad de Excelencia María de Maeztu. C.P.F. Ph-D MINECO financial support reference PRE2018-085781., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (MDM-2017-0737)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Kinetic Study of the Effective Thermal Polymerization of a Prebiotic Monomer: Aminomalononitrile

  • Hortelano, Carlos
  • Ruiz Bermejo, Marta
  • Fuente, José Luis de la
Aminomalononitrile (AMN), the HCN formal trimer, is a molecule of interest in prebiotic chemistry, in fine organic synthesis, and, currently, in materials science, mainly for bio-applications. Herein, differential scanning calorimetry (DSC) measurements by means of non-isothermal experiments of the stable AMN p-toluenesulfonate salt (AMNS) showed successful bulk AMN polymerization. The results indicated that this thermally stimulated polymerization is initiated at relatively low temperatures, and an autocatalytic kinetic model can be used to appropriately describe, determining the kinetic triplet, including the activation energy, the pre-exponential factor, and the mechanism function (Eα, A and f(α)). A preliminary structural characterization, by means of Fourier transform infrared (FTIR) spectroscopy, supported the effective generation of HCN-derived polymers prepared from AMNS. This study demonstrated the autocatalytic, highly efficient, and straightforward character of AMN polymerization, and to the best of our knowledge, it describes, for the first time, a systematic and extended kinetic analysis for gaining mechanistic insights into this process. The latter was accomplished through the help of simultaneous thermogravimetry (TG)-DSC and the in situ mass spectrometry (MS) technique for investigating the gas products generated during these polymerizations. These analyses revealed that dehydrocyanation and deamination processes must be important elimination reactions involved in the complex AMN polymerization mechanism., This research was funded by the projects PID2019-104205GB-C21 and PID2019-107442RB-C32 from the Spanish Ministry of Science and Innovation and the Spanish State Research Agency MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The high-resolution map of Oxia Planum, Mars; the landing site of the ExoMars Rosalind Franklin rover mission

  • Fawdon, Peter
  • Orgel, Csilla
  • Adeli, Solmaz
  • Balme, Matt
  • Calef, Fred J.
  • Davis, Joel M.
  • Frigeri, Alessandro
  • Grindrod, Peter
  • Hauber, Ernst
  • Deit, Laetitia Le
  • Loizeau, Damien
  • Nass, Andrea
  • Quantin-Nataf, Cathy
  • Sefton-Nash, Elliot
  • Thomas, Nick
  • Torres, Ines
  • Vago, Jorge L.
  • Volat, Matthieu
  • De Witte, Sander
  • Altieri, Francesca
  • Apuzzo, Andrea
  • Aramendia, Julene
  • Arana, Gorka
  • Singh Bahia, Rickbir
  • Banham, Steven G.
  • Barnes, Robert
  • Barrett, Alexander M.
  • Benedix, Wolf-Stefan
  • Bhardwaj, Anshuman
  • Boazman, Sarah Jane
  • Bontognali, Tomaso R. R.
  • Bridges, John
  • Bultel, Benjamin
  • Ciarletti, Valérie
  • De Sanctis, Maria Cristina
  • Dickeson, Zach
  • Favaro, Elena A.
  • Ferrari, Marco
  • Foucher, Frédéric
  • Goetz, Walter
  • Haldemann, Albert F. C.
  • Harrington, Elise
  • Kapatza, Angeliki
  • Koschny, Detlef
  • Krzesinska, Agata M.
  • Le Gall, Alice
  • Lewis, Stephen R.
  • Lim, Tanya
  • Madariaga, Juan Manuel
  • Man, Benjamin James
  • Mandon, Lucia
  • Mangold, Nicolas
  • Martin-Torres, Javier
  • McNeil, Joseph D.
  • Molina-Jurado, Antonio
  • Moral, Andoni G.
  • Motaghian, Sara
  • Nikiforov, Sergei
  • Oudart, Nicolas
  • Pacifici, Andrea
  • Parkes Bowen, Adam
  • Plettemeier, Dirk
  • Poulakis, Pantelis
  • Putri, Alfiah Rizky Diana
  • Ruesch, Ottaviano
  • Sam, Lydia
  • Schröder, Christian
  • Statz, Christoph
  • Thomas, Rebecca
  • Tirsch, Daniela
  • Toth, Zsuzsanna
  • Turner, Stuart
  • Voelker, Martin
  • Werner, Stephanie C.
  • Westall, Frances
  • Whiteside, Barry J.
  • Williams, Adam
  • Williams, Rebecca M. E.
  • Wright, Jack
  • Zorzano, Maria-Paz
This 1:30,000 scale geological map describes Oxia Planum, Mars, the landing site for the ExoMars Rosalind Franklin rover mission. The map represents our current understanding of bedrock units and their relationships prior to Rosalind Franklin’s exploration of this location. The map details 15 bedrock units organised into 6 groups and 7 textural and surficial units. The bedrock units were identified using visible and near-infrared remote sensing datasets. The objectives of this map are (i) to identify where the most astrobiologically relevant rocks are likely to be found, (ii) to show where hypotheses about their geological context (within Oxia Planum and in the wider geological history of Mars) can be tested, (iii) to inform both the long-term (hundreds of metres to ∼1 km) and the short-term (tens of metres) activity planning for rover exploration, and (iv) to allow the samples analysed by the rover to be interpreted within their regional geological context., The ExoMars Rosalind Franklin Mission is a partnership between ESA and NASA. The Rosalind Franklin Rover has eight instruments in its ‘Pasteur’ Payload, with Principal Investigators from seven countries all of whom we would like to thank for there support of this project. We would like to acknowledge the following funding bodies, people and institutions supporting the lead authors of this work. We thank the UK Space Agency (UK SA) for funding P. Fawdon, on grants; ST/W002736/1, ST/L00643X/1 and ST/R001413/1, MRB on grants; ST/T002913/1, ST/V001965/1, ST/R001383/1, ST/R001413/1, P. Grindrod on grants; ST/L006456/1, ST/R002355/1, ST/V002678/1 and J. Davis on grants ST/K502388/1, ST/R002355/1, ST/V002678/1 through the ongoing Aurora space exploration programme. C. Orgel was supported by the ESA Research Fellowship Program. Alessandro Frigeri: was funded by the Italian Space Agency (ASI) grant ASI-INAF number 2017-412-H.0 (ExoMars/Ma_MISS) and D. Loizeau was funded by the H2020-COMPET-2015 programme (grant 687302), C. Quantin-Nataf was supported by the French space agency CNES, I. Torres was supported by an ESA Young Graduate Traineeship, A. Nass was supported by Helmholtz Metadata Projects (#ZT-I-PF-3-008). We thank NASA and the HiRISE camera team for data collection support throughout the ExoMars landing site selection and charectorisation process. The USGS for the HiRISE DTM data and maintaining the ISIS and SOCET SET DEM workflows. The authors wish to thank the CaSSIS spacecraft and instrument engineering teams. CaSSIS is a project of the University of Bern and funded through the Swiss Space Office via ESA's PRODEX programme. The instrument hardware development was also supported by the Italian Space Agency (ASI) (ASI-INAF agreement no. I/2020-17-HH.0), INAF/Astronomical Observatory of Padova, and the Space Research Center (CBK) in Warsaw. Support from SGF (Budapest), the University of Arizona (Lunar and Planetary Lab.) and NASA are also gratefully acknowledged. Operations support from the UK Space Agency under grant ST/R003025/1 is also acknowledged. This research has made use of the USGS Integrated Software for Imagers and Spectrometers (ISIS) Technical support for setup of the Multi-Mission Geographic Information System for concurrent team mapping was provided by F. Calef (III) and T. Soliman at NASA JPL and S. de Witte at ESA-ESTEC., This work was supported by Agencia Estatal de Investigación [grant number ID2019-107442RB-C32, MDM-2017-0737]; Agenzia Spaziale Italiana [grant number 2017-412-H.0]; Bundesministerium für Wirtschaft und Technologie [grant number 50 QX 2002]; Centre National de la Recherche Scientifique; Centre National d’Etudes Spatiales; Euskal Herriko Unibertsitatea [grant number PES21/88]; Istituto Nazionale di Astrofisica [grant number I/ 060/10/0]; Ministerio de Economía y Competitividad [grant number PID2019-104205GB-C21]; Ministry of Science and Higher Education of the Russian Federation [grant number AAAA-A18-118012290370-6]; National Aeronautics and Space Administration [grant number NNX15AH46G]; Norges Forskningsråd [grant number 223272]; European Union's Horizon 2020 (H2020-COMPET-2015) [grant number 687302 (PTAL)]; Sofja Kovalevskaja Award of the Alexander von Humboldt Foundation; MINECO [grant number PID2019-107442RB-C32]; The Open University [grant number Space Strategic Research Area]; European Union's Horizon 2020 research and innovation programme [grant number 776276]; H2020-COMPET-2015 [grant number 687302]; The Research Council of Norway, Centres of Excellence funding scheme [grant number 223272]; Helmholtz Metadata Projects [grant number ZT-I-PF-3-008]; The Research Council of Norway [grant number 223272]; Swiss Space Office via ESA's PRODEX programme; Ines Torres was supported by an ESA Young Graduate Traineeship; Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung [grant number 200021_197293]; Science and Technology Facilities Council [grant number 1967420]; UK Space Agency [grant number ST/K502388/1, ST/R002355/1, ST/V002678/1]. The ExoMars Rosalind Franklin Mission is a partnership between ESA and NASA. The Rosalind Franklin Rover has eight instruments in its ‘Pasteur’ Payload, with Principal Investigators from seven countries all of whom we would like to thank for there support of this project. We would like to acknowledge the following funding bodies, people and institutions supporting the lead authors of this work. We thank the UK Space Agency (UK SA) for funding P. Fawdon, on grants; ST/W002736/1, ST/L00643X/1 and ST/R001413/1, MRB on grants; ST/T002913/1, ST/V001965/1, ST/R001383/1, ST/R001413/1, P. Grindrod on grants; ST/L006456/1, ST/R002355/1, ST/V002678/1 and J. Davis on grants ST/K502388/1, ST/R002355/1, ST/V002678/1 through the ongoing Aurora space exploration programme. C. Orgel was supported by the ESA Research Fellowship Program. Alessandro Frigeri: was funded by the Italian Space Agency (ASI) grant ASI-INAF number 2017-412-H.0 (ExoMars/Ma_MISS) and D. Loizeau was funded by the H2020-COMPET-2015 programme (grant 687302), C. Quantin-Nataf was supported by the French space agency CNES, I. Torres was supported by an ESA Young Graduate Traineeship, A. Nass was supported by Helmholtz Metadata Projects (#ZT-I-PF-3-008). We thank NASA and the HiRISE camera team for data collection support throughout the ExoMars landing site selection and charectorisation process. The USGS for the HiRISE DTM data and maintaining the ISIS and SOCET SET DEM workflows. The authors wish to thank the CaSSIS spacecraft and instrument engineering teams. CaSSIS is a project of the University of Bern and funded through the Swiss Space Office via ESA's PRODEX programme. The instrument hardware development was also supported by the Italian Space Agency (ASI) (ASI-INAF agreement no. I/2020-17-HH.0), INAF/Astronomical Observatory of Padova, and the Space Research Center (CBK) in Warsaw. Support from SGF (Budapest), the University of Arizona (Lunar and Planetary Lab.) and NASA are also gratefully acknowledged. Operations support from the UK Space Agency under grant ST/R003025/1 is also acknowledged. This research has made use of the USGS Integrated Software for Imagers and Spectrometers (ISIS) Technical support for setup of the Multi-Mission Geographic Information System for concurrent team mapping was provided by F. Calef (III) and T. Soliman at NASA JPL and S. de Witte at ESA-ESTEC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preservation of glycine coordination compounds under a gamma radiation dose representative of natural mars radioactivity

  • Jiménez Bonales, Laura
  • Muñoz-Iglesias, Victoria
  • Prieto-Ballesteros, Olga
  • Mateo-Martí, Eva
The Martian subsurface is more favorable for organic preservation than its surface because of the shielding effect of rocks from cosmic rays and UV radiation with increasing depth. Nevertheless, the natural radioactivity on Mars owing to U, Th, and K must be considered to study the possible extant and/or extinct life. Here, we demonstrate the importance of natural radiation on the amino acid glycine in two different chemical environments, GlyFeSO4 5H2O and GlyMgSO4 5H2O, which are coordination compounds considered relevant to Mars. The results show that after a 600 kGy dose of gamma radiation, glycine was more stable when it bonded to Mg in the GlyMgSO4 5H2O coordination compound, it was less stable when it bonded to Fe in the GlyFeSO4 5H2O compound. Studies on the effects of gamma radiation on preservation of organic molecules bound to minerals and other potential compounds on Mars are significantly important in the search for biosignatures., The authors used the research facilities at the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA) projects PID2019-104205GB-C21 and PID2019-107442RB-C32, granted by the Spanish State Research Agency (AEI) project MCIN/AEI/10.13039/501100011033 MDM-2017-0737 granted by the Centro de Astrobiología (CSIC-INTA), Unidad de Excelencia María de Maeztu., With funding from the Spanish government through the ‘María de Maeztu Unit of Excelence’ accreditation (MDM-2017-0737)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dehydration rate of the glycine-MgSO4·5H2O complex and the stability of glycine expelled from the complex by in situ Raman spectroscopy under Mars-relevant conditions

  • Jiménez Bonales, Laura
  • Rodríguez-Villagra, Nieves
  • Fernández-Sampedro, M. Teresa
  • Mateo-Martí, Eva
In this work, we studied the dehydration process of the glycine-MgSO4·5H2O complex under Mars-relevant conditions (99% CO2 and 0.6% H2O under ultra violet (UV) irradiation exposure at 7-mbar pressure and high vacuum conditions: 8 × 10−5 and 5 × 10−5 mbar) by in situ Raman spectroscopy inside a planetary atmosphere and surface chamber (PASC). This work provides quality Raman spectra taken under simulated planetary conditions (to be integrated in a database), as Raman spectroscopy forms part of the current and upcoming NASA and ESA Mars planetary missions. The results demonstrate that Raman spectroscopy can be used to calculate rates of dehydration of the glycine-MgSO4·5H2O compound to study the chemical stability with respect to photodecomposition (1) of metal-bound glycine molecules forming the complex and (2) glycine expelled from the complex, both under Mars-simulated conditions; finally, Raman spectroscopy can also be used to quantify intermolecular interactions in terms of local pressures. Importantly, advanced detection of water molecules as part of a complex with astrobiological interest under planetary conditions plays a crucial role in planetary missions., Spanish State Research Agency (AEI), Grant/Award Numbers: MDM-2017-0737, PID2019-107442RB-C32, PID2019-104205GB-C21; Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA), With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (MDM-2017-0737)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Study of the Stability of Gly·MgSO4·5H2O under Simulated Martian Conditions by In Situ Raman Spectroscopy

  • Jiménez Bonales, Laura
  • Mateo-Martí, Eva
Identification of spectroscopic fingerprints that correspond to relevant molecules/minerals in a Mars-like environment is a crucial search in astrobiology. Therefore, we studied the stability of Gly·MgSO4·5H2O under Mars-like surface conditions and compared it to the behavior of epsomite and glycine. Gly·MgSO4·5H2O has been identified as a molecule of astrobiological interest since an amino acid and water molecules, which are essential for life, are part of its structure. Furthermore, this compound may form by the interaction of sulfate minerals with glycine-bearing aqueous solutions, and both could be present on Mars. The main analyses were performed by using in situ Raman spectroscopy, a ground-breaking technique for NASA and ESA Mars planetary missions. We have integrated a Raman spectrometer in a Planetary Atmosphere and Surfaces Chamber (PASC) and have identified the processing of molecules exposed to a simulated martian atmosphere, UV irradiation, and temperature. Our results show that pressure is critical to provoke amorphization of Gly·MgSO4·5H2O, and the release of glycine from the compound; the stabilization effect at low temperature and stability of Gly·MgSO4·5H2O is greater than to glycine and epsomite. The strategy employed here allows us to evaluate the effect of diverse simulated martian environmental conditions on molecular preservation by using Raman spectroscopy., The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA), by projects PID2019-104205GB-C21 and PID2019-107442RB-C32 from the Spanish Ministerio de Ciencia, Innovación y Universidades and by the Spanish State Research Agency (AEI) project MDM-2017-0737 Centro de Astrobiología (CSIC-INTA), Unidad de Excelencia María de Maeztu. Additionally, the authors are grateful to María Teresa Fernández from CAB for performing the XRD measurements., With funding from the Spanish government through the ‘María de Maeztu Unit of Excelence’ accreditation (MDM-2017-0737)., Peer reviewed