Skip to main content

QUIMICA PREBIOTICA: UNA PLATAFORMA EXPERIMENTAL PARA LA EXPLORACION DE HABITABILIDAD EN LUNAS HELADAS DEL SISTEMA SOLAR

ESP2017-89053-C2-2-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre INSTITUTO NACIONAL DE TECNICA AEROESPACIAL ESTEBAN TERRADAS (INTA)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Highly efficient melt polymerization of diaminomaleonitrile

  • Mas, I.
  • Hortelano, C.
  • Ruiz-Bermejo, Marta
  • de la fuente, Jose Luis
Kinetic, structural characteristics and the mechanism for the formation of DAMN polymers was studied. Šesták-Berggren model can successfully describe these melt polymerizations. TG-DSC-MS analysis of DAMN revealed thermal processes during its bulk polymerization. Prebiotic chemistry inspires polymeric materials with advanced performances. These DAMN polymers may be potentially applied as multi-functional materials., HCN polymers are of great interest in research on the origin of life and, currently, in materials science because they have shown potential for the design of electrical devices, (photo)catalysts and biomedicine. Herein, calorimetric measurements have successfully described the bulk polymerization of HCN tetramer, diaminomaleonitrile (DAMN). Two series of nonisothermal experiments were carried out by differential scanning calorimetry (DSC), and low-heating rate (β) the thermograms (β ≤ 5 °C/min) indicated that the polymerization is initiated at temperatures lower than the DAMN melting point, ~180 °C; while higher heating rates results in a rapid polymerization reaction, which occurs entirely in the liquid phase. The DSC data were analysed using model-free linear iso-conversional methods to estimate kinetic parameters, such as activation energy, and a suitable kinetic model was proposed for these thermal polymerizations in the melt. A preliminary structural and morphological characterization by means of Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) was also completed. This study demonstrated the autocatalytic, highly efficient and straightforward character of this stimulated thermal polymerization of DAMN and, to the best of our knowledge, describes for the first time a systematic and extended kinetic analysis to gain mechanistic insights into this process. The latter was done through the help of simultaneous thermogravimetry (TG)-DSC and in situ mass spectrometry (MS) technique to investigate the gas products generated during these melt polymerizations. These analyses revealed that deamination and dehydrocyanation processes are two relevant reactions involved in DAMN polymerization mechanism., The authors used the research facilities of the Centro de Astrobiologia (CAB) and were supported by the Instituto Nacional de Tecnica Aeroespacial Esteban Terradas (INTA), by the projects ESP2017-89053-C2-2-P, PID2019-104205GB-C21 and PID2019-107442RB-C32 from the Spanish Ministerio de Ciencia, Innovacion y Universidades and by the Spanish State Research Agency (AEI) project MDM-2017-0737 Centro de Astrobiologia (CSIC-INTA), Unidad de Excelencia Maria de Maeztu. C. Hortelano wants to express his gratitude to INTA for this training scholarship. Additionally, the authors are grateful to M<SUP>a</SUP> Teresa Fernandez from CAB for performing the FTIR spectra and to Pilar Valles from INTA for recording the SEM images., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

A Comparative Study on HCN Polymers Synthesized by Polymerization of NH4CN or Diaminomaleonitrile in Aqueous Media: New Perspectives for Prebiotic Chemistry and Materials Science

  • Ruiz-Bermejo, Marta
  • de la fuente, Jose Luis
  • Carretero González, J.
  • García Fernández, L.
  • Rosa Aguilar, M.
HCN polymers are a group of complex and heterogeneous substances that are widely known in the fields of astrobiology and prebiotic chemistry. In addition, they have recently received considerable attention as potential functional material coatings. However, the real nature and pathways of formation of HCN polymers remain open questions. It is well established that the tuning of macromolecular structures determines the properties and practical applications of a polymeric material. Herein, different synthetic conditions were explored for the production of HCN polymers from NHCN or diaminomaleonitrile in aqueous media with different concentrations of the starting reactants and several reaction times. By using a systematic methodology, both series of polymers were shown to exhibit similar, but not identical, spectroscopic and thermal fingerprints, which resulted in a clear differentiation of their morphological and electrochemical properties. New macrostructures are proposed for HCN polymers, and promising insights are discussed for prebiotic chemistry and materials science on the basis of the experimental results., The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA) and by the Spanish Ministerio de Ciencia, Innovacijn y Universidades ESP2017-89053-C2-2-P. Additionally, the authors are grateful to Ma Teresa Fernández for recording the FTIR spectra and XRD and Rosana Ramírez for the SEM images. J.C.-G. acknowledges the Ramjn y Cajal contract (RYC-2015-17722); With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (MDM-2017-0737), Peer review
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Characterization of HCN-derived thermal polymer: Implications for chemical evolution

  • Villafañe Barajas, S. A.
  • Ruiz-Bermejo, Marta
  • Rayo Pizarroso, P.
  • Colín García, M.
(This article belongs to the Special Issue Advances in HCN-Derived Polymers), Hydrogen cyanide (HCN)-derived polymers have been recognized as sources of relevant organic molecules in prebiotic chemistry and material sciences. However, there are considerable gaps in the knowledge regarding the polymeric nature, the physicochemical properties, and the chemical pathways along polymer synthesis. HCN might have played an important role in prebiotic hydrothermal environments; however, only few experiments use cyanide species considering hydrothermal conditions. In this work, we synthesized an HCN-derived thermal polymer simulating an alkaline hydrothermal environment (i.e., HCN (l) 0.15 M, 50 h, 100 degrees C, pH approximately 10) and characterized its chemical structure, thermal behavior, and the hydrolysis effect. Elemental analysis and infrared spectroscopy suggest an important oxidation degree. The thermal behavior indicates that the polymer is more stable compared to other HCN-derived polymers. The mass spectrometric thermal analysis showed the gradual release of several volatile compounds along different thermal steps. The results suggest a complicate macrostructure formed by amide and hydroxyl groups, which are joined to the main reticular chain with conjugated bonds (C=O, N=O, -O-C=N). The hydrolysis treatment showed the pH conditions for the releasing of organics. The study of the synthesis of HCN-derived thermal polymers under feasible primitive hydrothermal conditions is relevant for considering hydrothermal vents as niches of chemical evolution on early Earth., This research was funded by the project ESP2017-89053-C2-2-P from the Spanish Ministerio de Ciencia, Innovacion y Universidades; the project MDM-2017-0737 Centro de Astrobiologia (CSIC-INTA), Unidad de Excelencia Maria de Maeztu from the Spanish State Research Agency (AEI), the DGAPA-PAPIIT (grant number IA203217), and CONACyT (grant A1-S-25341)., Peer review
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

A dual perspective on the microwave-assisted synthesis of HCN polymers towards the chemical evolution and design of functional materials

  • Hortal, Lucia
  • Pérez Fernández, Cristina
  • de la fuente, Jose Luis
  • Valles González, M. P.
  • Mateo Marti, Eva
  • Ruiz-Bermejo, Marta
In this paper, the first study on NH4CN polymerization induced by microwave radiation is described, where a singular kinetic behaviour, especially when this reaction is conducted in the absence of air, is found. As a result, a complex conjugated N-heterocyclic polymer system is obtained, whose properties are very different, and even improved according to morphological features, characterized by their X-ray diffraction patterns and scanning electron microscopy analysis, with respect to those produced under conventional thermal treatment. In addition, a wide variety of relevant bioorganics have been identified, such as amino acids, nucleobases, co-factors, etc., from the synthetized NH4CN polymers. These particular families of polymers are of high interest in the fields of astrobiology and prebiotic chemistry and, more recently, in the development of smart multifunctional materials. From an astrobiological perspective, microwave-driven syntheses may simulate hydrothermal environments, which are considered ideal niches for increasing organic molecular complexity, and eventually as scenarios for an origin of life. From an industrial point of view and for potential applications, a microwave irradiation process leads to a notable decrease in the reaction times, and tune the properties of these new series macromolecular systems. The characteristics found for these materials encourage the development of further systematic research on this alternative HCN polymerization., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (MDM-2017-0737); The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA), by projects ESP2017-89053-C2-2-P, PID2019-104205GB-C21 and PID2019-107442RB-C32 from the Spanish Ministerio de Ciencia, Innovación y Universidades and by the Spanish State Research Agency (AEI) project MDM-2017-0737 Centro de Astrobiología (CSIC-INTA), Unidad de Excelencia María de Maeztu. Additionally, the authors are grateful to Mª Teresa Fernández from CAB for performing the FT-IR spectra and Pedro Rayo for her assistance in the GC-MS analyses., Peer review
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Chemorheology and Kinetics of High-Performance Polyurethane Binders Based on HMDI

  • Lucio, B.
  • de la fuente, Jose Luis
Aliphatic diisocyanates, such as 1,6-hexamethylene diisocyanate (HMDI), are preferred curing agents for the formation of polyurethanes (PUs) in applications where resistance to abrasion or degradation by ultraviolet light takes precedence. Aside from the final properties, the curing agent plays a key role in the bulk manufacturing of such materials, and it mainly affects the polymerization kinetics and their rheology. The copolymerization of HMDI and a metallo-prepolymer derivative from hydroxyl-terminated polybutadiene (HTPB) is studied under isothermal conditions (50–80 °C). This study is carried out by means of an indirect method, using both rotational viscometry and dynamic rheometry. At the beginning of the process, the viscosity growth fit well to a first-order kinetic model. Afterward, the reactive system passes through gelation, from which only rheology is allowed for the investigation of the entire polymerization process. This transition is analyzed in depth together with predictions from percolation theory. The conversion degree is determined from rheological measurements, and then an autocatalytic kinetic model is applied to describe the overall process. Finally, an isoconversional method allows the evolution of activation energy to be studied. This analysis merits attention for the development of high-performance binders that are of great interest in aerospace propulsion technology., The authors are grateful to INTA for financial support through the FPI fellowship programme (2011-2015) and to the Spanish Ministerio de Ciencia, Innovacion y Universidades from the ESP2017-89053-C2-2-P project, and to Gobierno Vasco., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Constraining the preservation of organic compounds in Mars analog nontronites after exposure to acid and alkaline fluids.

  • Gil Lozano, C.
  • Fairén, Alberto G.
  • Muñoz Iglesias, V.
  • Fernández Sampedro, M.
  • Prieto-Ballesteros, Olga
  • Gago Duport, L.
  • Losa Adams, E.
  • Carrizo, D.
  • Bishop, J. L.
  • Fornado, Teresa
  • Mateo Marti, Eva
The presence of organic matter in lacustrine mudstone sediments at Gale crater was revealed by the Mars Science Laboratory Curiosity rover, which also identified smectite clay minerals. Analogue experiments on phyllosilicates formed under low temperature aqueous conditons have illustrated that these are excellent reservoirs to host organic compounds against the harsh surface conditions of Mars. Here, we evaluate whether the capacity of smectites to preserve organic compounds can be influenced by a short exposure to different diagenetic fluids. We analyzed the stability of glycine embedded within nontronite samples previously exposed to either acidic or alkaline fluids (hereafter referred to as "treated nontronites") under Mars-like surface conditions. Analyses performed using multiple techniques showed higher photodegradation of glycine in the acid-treated nontronite, triggered by decarboxylation and deamination processes. In constrast, our experiments showed that glycine molecules were preferably incorporated by ion exchange in the interlayer region of the alkali-treated nontronite, conferring them a better protection against the external conditions. Our results demonstrate that smectite previously exposed to fluids with different pH values influences how glycine is adsorbed into their interlayer regions, affecting their potential for preservation of organic compounds under contemporary Mars surface conditions., The research leading to these results is a contribution from the Projects "icyMARS" and "MarsFirstWater", funded by the European Research Council, Starting Grant no. 307496 and Consolidator Grant no. 818602, respectively, to AGF. We acknowledge to S. Galvez-Martinez for help and support during XPS measurements and the technical staff of the Unidad de Tecnicas Geologicas (Universidad Complutense de Madrid) for the XRD measurements. This Project has been partially supported by Unidad de Excelencia "Maria de Maeztu", MDM-2017-0737, Centro de Astrobiologia (INTA-CSIC), OPB is supported by project ESP2017-89053-C2-1-P and EMM by project ESP2017-89053-C2-2-P., Peer review
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

2-D organization of silica nanoparticles on gold surfaces: CO2 marker detection and storage

  • Cueto Díaz, Eduardo J.
  • Gálvez Martínez, Santos
  • Torquemada, M. C.
  • Valles González, M. P.
  • Mateo Marti, Eva
A single layer of silica nanoparticles with an average size of ∼200 nm was deposited over the surface of pristine gold wafers, aided by (3-mercaptopropyl)trimethoxysilane. The nanoparticle immobilization was driven by covalent bonding rather than a self-assembly process, leading to a cluster-assembled material which has CO2 sensing features. Here, we show how this device can be used for CO2 physisorption and chemisorption. We analyse the device, both spectroscopically and morphologically, before and after exposure to an atmosphere of 7 mbar of CO2, inside a planetary atmospheres and surfaces simulation chamber, (PASC) mimiking Martian atmospheric conditions. Our studies demonstrate that these clusters are suitable for CO2 detection and storage, under well controlled experimental Martian conditions. Their high sensitivity at a very low concentration of CO2, 12.4 ppm, makes them ideal candidates in the nanosensor field., This work has been supported by the MINECO project ESP2017-89053. The Instituto Nacional de Tecnica Aeroespacial supported the work performed at Centro de Astrobiologia (CAB). This project has been partially funded by the Spanish State Research Agency (AEI) Project No. MDM-2017-0737 Unidad de Excelencia "Maria de Maeztu"-Centro de Astrobiologia (INTA-CSIC). E. C. D. Postdoctoral Fellowship from CAM reference: 2018/TIC-10616. We thank you M. Sampedro for IR technical support. E. M. M. has been partially supported by Spanish Ministry of Science and Innovation project (ref. PID2019-104205GB-C21)., Peer review
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Temperature effect on aqueous NH4CN polymerization: Relationship between kinetic behaviour and structural properties

  • Mas, I.
  • de la fuente, Jose Luis
  • Ruiz-Bermejo, Marta
Highlights Temperature has a significant effect on the nature of NH4CN polymers. Autocatalytic or nth order kinetic is conditioned by temperature for NH4CN polymerization. The kinetic behaviour of the NH4CN polymerization presents diffusion limitations. A reliable value for the activation energy of NH4CN polymerization has been obtained., Herein, a kinetic analysis for aqueous NH4CN polymerizations is presented, which is consistent with an autocatalytic model when polymerizations are performed at relatively high temperatures, 80–90 °C. Further experiments at lower polymerization temperatures, approximately 50 °C, have demonstrated that this relevant prebiotic reaction follows nth-order kinetics rather than an autocatalytic mechanism. In addition, the sol fractions of these precipitation polymerizations have been evaluated by UV–Vis measurements, which also show a mechanistic shift with the reaction temperature. This change in the kinetic behaviour led to the proposal of a simple empirical methodology to describe both chemical- and diffusion-controlled regions. Despite the simplicity of the approach based on the Hill equation, fundamental kinetic parameters, such as the activation energy, can be determined in the diffusion-free zone. These results motivated a systematic structural characterization study of the respective insoluble polymers by means of elemental analysis, FT-IR and NMR spectroscopies and XRD. All these kinetic and structural analyses confirmed that the temperature has a significant effect on the polymerization kinetic of the system, on the macrostructural features and properties of the HCN-based polymers, and presumably also on the polymerization pathways. These data increase our knowledge about the chemistry of this particular family of HCN polymers, which is currently of interest both in the field of materials science and in prebiotic chemistry and astrobiology., The authors used the research facilities of the Centro de Astrobiologia (CAB) and were supported by the Instituto Nacional de Tecnica Aeroespacial "Esteban Terradas" (INTA), by the project ESP2017-89053-C2-2-P from the Spanish Ministerio de Ciencia, Innovacion y Universidades and by the Spanish State Research Agency (AEI) project MDM-2017-0737 Centro de Astrobiologia (CSIC-INTA), Unidad de Excelencia Maria de Maeztu. Additionally, the authors are grateful to M<feminine ordinal indicator> Teresa Fernandez for performing the FT-IR spectra and XRD measurements and to David Hochberg for the detailed revision of the manuscript., Peer review
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Comparative Study on HCN Polymers Synthesized by Polymerization of NH4CN or Diaminomaleonitrile in Aqueous Media: New Perspectives for Prebiotic Chemistry and Materials Science

  • Ruiz Bermejo, Marta
  • Fuente, L. de la
  • Carretero-González, Javier
  • García-Fernández, Luis
  • Aguilar, María Rosa
HCN polymers are a group of complex and heterogeneous substances that are widely known in the fields of astrobiology and prebiotic chemistry. In addition, they have recently received considerable attention as potential functional material coatings. However, the real nature and pathways of formation of HCN polymers remain open questions. It is well established that the tuning of macromolecular structures determines the properties and practical applications of a polymeric material. Herein, different synthetic conditions were explored for the production of HCN polymers from NHCN or diaminomaleonitrile in aqueous media with different concentrations of the starting reactants and several reaction times. By using a systematic methodology, both series of polymers were shown to exhibit similar, but not identical, spectroscopic and thermal fingerprints, which resulted in a clear differentiation of their morphological and electrochemical properties. New macrostructures are proposed for HCN polymers, and promising insights are discussed for prebiotic chemistry and materials science on the basis of the experimental results., The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA) and by the Spanish Ministerio de Ciencia, Innovacijn y Universidades ESP2017-89053-C2-2-P. Additionally, the authors are grateful to Ma Teresa Fernández for recording the FTIR spectra and XRD and Rosana Ramírez for the SEM images. J.C.-G. acknowledges the Ramjn y Cajal contract (RYC-2015-17722)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly efficient melt polymerization of diaminomaleonitrile

  • Mas, I.
  • Hortelano, Carlos
  • Ruiz Bermejo, Marta
  • Fuente, José Luis de la
HCN polymers are of great interest in research on the origin of life and, currently, in materials science because they have shown potential for the design of electrical devices, (photo)catalysts and biomedicine. Herein, calorimetric measurements have successfully described the bulk polymerization of HCN tetramer, diaminomaleonitrile (DAMN). Two series of nonisothermal experiments were carried out by differential scanning calorimetry (DSC), and low-heating rate (β) the thermograms (β ≤ 5 °C/min) indicated that the polymerization is initiated at temperatures lower than the DAMN melting point, ~180 °C; while higher heating rates results in a rapid polymerization reaction, which occurs entirely in the liquid phase. The DSC data were analysed using model-free linear iso-conversional methods to estimate kinetic parameters, such as activation energy, and a suitable kinetic model was proposed for these thermal polymerizations in the melt. A preliminary structural and morphological characterization by means of Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) was also completed. This study demonstrated the autocatalytic, highly efficient and straightforward character of this stimulated thermal polymerization of DAMN and, to the best of our knowledge, describes for the first time a systematic and extended kinetic analysis to gain mechanistic insights into this process. The latter was done through the help of simultaneous thermogravimetry (TG)-DSC and in situ mass spectrometry (MS) technique to investigate the gas products generated during these melt polymerizations. These analyses revealed that deamination and dehydrocyanation processes are two relevant reactions involved in DAMN polymerization mechanism., The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA), by the projects ESP2017-89053-C2-2-P, PID2019-104205GB-C21 and PID2019-107442RB-C32 from the Spanish Ministerio de Ciencia, Innovación y Universidades and by the Spanish State Research Agency (AEI) project MDM-2017-0737 Centro de Astrobiología (CSIC-INTA), Unidad de Excelencia María de Maeztu. C. Hortelano wants to express his gratitude to INTA for this training scholarship., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (MDM-2017-0737).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reactivity of Cyanide at Water-Ice Interfaces: Implications for the Search for Organics on Icy Worlds

  • Marín-Yaseli, Margarita R.
  • González-Toril, Elena
  • Ruiz Bermejo, Marta
Icy moons in our solar system are targets of interest to search for signs of life and habitability beyond Earth. They are the astrobiological aim for several developing space missions (JUICE, Europa Clipper, and Europa Lander). A further understanding of the processes that force a planetary object to develop a biological system and to develop habitability conditions could be obtained by adopting a prebiotic chemistry point of view. In this regard, it is highly interesting to search for organic compounds synthesized from cyanide since it has been proposed that polymerization of NH4CN would be applicable to icy planetary environments. Thus, the effect of water freeze-thaw cycles, UV-radiation and salts on the polymerization of NH4CN was explored as an approach to understand the possible organic chemistry of icy worlds. As a result, insoluble and soluble NH4CN polymers, synthesized under multiple conditions, were analyzed by GC-MS. A diverse set of amino acids, carboxylic acids, and several N-heterocycles were identified. Glyoxylic acid was detected under particular reaction conditions, extending the plausible favorable conditions for the emergence of this molecule, referred to as the “glyoxylate scenario.” In addition, the GC-MS results were studied by multivariate analysis, showing that the ice-water interfaces may be ideal places to develop complex organic chemistry from a carbon source as simple as cyanide., The authors used the research facilities of the Centro de AstrobiologCAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA), by the projects ESP2017-89053-C2-2-P and PID2019-104205GB-C22 from the Spanish Ministerio de Ciencia, Innovación y Universidades and by the Spanish State Research Agency (AEI) project MDM-2017-0737 Centro de Astrobiología (CSIC-INTA), Unidad de Excelencia María de Maeztu. MM-Y was supported by a research training grant from INTA., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (MDM-2017-0737)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An experimental study of the thermolysis of hydrogen cyanide: The role of hydrothermal systems in chemical evolution

  • Villafañe-Barajas, S.A.
  • Colin-García, María
  • Negrón-Mendoza, Alicia
  • Ruiz Bermejo, Marta
Hydrogen cyanide (HCN) is considered a fundamental molecule in prebiotic chemistry experiments due to the fact that it could have an important role as raw material to form more complex molecules, as well as it could be an intermediate molecule in chemical reactions. However, the primitive scenarios in which this molecule might be available have been widely discussed. Hydrothermal systems have been considered as abiotic reactors and ideal niches for chemical evolution. Nevertheless, several experiments have shown that high temperatures and pressures could be adverse to the stability of organic molecules. Thus, it is necessary to carry out systematic experiments to study the synthesis, stability and fate of organic molecules in hydrothermal scenarios. In this work, we performed experiments focused on the stability and fate of HCN under a simple hydrothermal system scenario: the thermolysis of HCN at 100°C, at acidic and basic pH and in the presence of Mg-montmorillonite. Furthermore, we analysed the products from HCN thermolysis and highlighted the role of these chemical species as prebiotic molecules under a hydrothermal scenario., SAVB acknowledges Posgrado en Ciencias de la Tierra UNAM, CONACyT (Ph.D. grant 697442 and the financial support for a research stay grant) and the Laboratorio de Evolucion Quimica (ICN-UNAM) for the use of its facilities. ANM acknowledges PAPIIT (IN110919). M.R-B. used the research facilities of the Centro de Astrobiología (CAB), and was supported by the Instituto Nacional de Técnica Aeroespacial ‘Esteban Terradas' (INTA) and by the Spanish Ministerio de Ciencia, Innovación y Universidades ESP2017-89053-C2-2-P. M.C-G acknowledges the financial support from the CONACyT A1-S-24341 and DGAPA-PAPIIT IA203217 research grants, and from the Instituto de Geología (UNAM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Prokaryotic Community Structure and Metabolisms in Shallow Subsurface of Atacama Desert Playas and Alluvial Fans After Heavy Rains: Repairing and Preparing for Next Dry Period

  • Fernández Martínez, Miguel Ángel
  • Severino, Rita Sofía dos Santos
  • Moreno-Paz, Mercedes
  • Gallardo-Carreño, Ignacio
  • Blanco, Yolanda
  • Warren-Rhodes, Kimberley
  • García-Villadangos, Miriam
  • Ruiz Bermejo, Marta
  • Barberán, Albert
  • Wettergreen, David
  • Cabrol, Nathalie
  • Parro-García, Víctor
The Atacama Desert, the oldest and driest desert on Earth, displays significant rains only once per decade. To investigate how microbial communities take advantage of these sporadic wet events, we carried out a geomicrobiological study a few days after a heavy rain event in 2015. Different physicochemical and microbial community analyses were conducted on samples collected from playas and an alluvial fan from surface, 10, 20, 50, and 80 cm depth. Gravimetric moisture content peaks were measured in 10 and 20 cm depth samples (from 1.65 to 4.1% w/w maximum values) while, in general, main anions such as chloride, nitrate, and sulfate concentrations increased with depth, with maximum values of 13–1,125; 168–10,109; and 9,904–30,952 ppm, respectively. Small organic anions such as formate and acetate had maximum concentrations from 2.61 to 3.44 ppm and 6.73 to 28.75 ppm, respectively. Microbial diversity inferred from DNA analysis showed Actinobacteria and Alphaproteobacteria as the most abundant and widespread bacterial taxa among the samples, followed by Chloroflexi and Firmicutes at specific sites. Archaea were mainly dominated by Nitrososphaerales, Methanobacteria, with the detection of other groups such as Halobacteria. Metaproteomics showed a high and even distribution of proteins involved in primary metabolic processes such as energy production and biosynthetic pathways, and a limited but remarkable presence of proteins related to resistance to environmental stressors such as radiation, oxidation, or desiccation. The results indicated that extra humidity in the system allows the microbial community to repair, and prepare for the upcoming hyperarid period. Additionally, it supplies biomarkers to the medium whose preservation potential could be high under strong desiccation conditions and relevant for planetary exploration., This work was funded by the Spanish Ministerio de Economía y Competitividad/Fondo Europeo de Desarrollo Regional Grants no. ESP2014-58494-R, ESP2015-69540-R (MINECO/FEDER), ESP2017-89053-C2-2-P, and “María de Maeztu” program project no. MDM-2017-0737; the NASA ASTEP “Life in the Atacama (LITA)” project no. NNX11AJ87G, and NASA Astrobiology Institute Colaborative Agreement 7 (CAN-7) project No. NNX15BB01A. MF-M had a posdoctoral grant from the Comunidad de Madrid/European Union YEI program, and IG-C had a FPI grant from the Spanish Ministry of Economy and Competitivity (MINECO)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (MDM-2017-0737)., Peer reviewed